Rami, This is a bad problem, below. Possibly it might be alleviated by blocking loading of other drivers. But I cannot take more time tonight. Marvin ---------------------- [ 177.454426] agrmodem: module license 'Proprietary' taints kernel. [ 177.463572] agrsm: created 0 infos [ 177.463582] Loading module Agere Modem Controller driver version 2.1.60.0.Linspire (2005-11-16) [ 177.500553] ttyAGS3 at I/O 0x400 (irq = 3) is a AgereModem [ 177.500808] agrserial: Loading module Agere Modem Interface driver version 2.1.60.0.Linspire (2005-11-16) [ 177.757834] BUG: unable to handle kernel NULL pointer dereference at 00000004 [ 177.757865] IP: [<f850ed83>] LXSoftModemStart+0x23/0x230 [agrmodem] [ 177.758081] *pde = 00000000 [ 177.758089] Oops: 0000 [#1] SMP [ 177.758115] last sysfs file: /sys/devices/virtual/tty/ttyAGS3/dev [ 177.758123] Dumping ftrace buffer: [ 177.758147] (ftrace buffer empty) [ 177.758152] Modules linked in: agrserial agrmodem(P) i915 drm binfmt_misc ppdev bridge stp bnep lp parport joydev snd_hda_intel snd_pcm_oss snd_mixer_oss pcmcia snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi arc4 snd_rawmidi ecb snd_seq_midi_event snd_seq snd_timer snd_seq_device yenta_socket rsrc_nonstatic iTCO_wdt iTCO_vendor_support tifm_7xx1 ath5k snd psmouse soundcore pcmcia_core tifm_core pcspkr serio_raw sdhci_pci sdhci btusb input_polldev intel_agp snd_page_alloc mac80211 video led_class output cfg80211 agpgart ohci1394 ieee1394 r8169 mii fbcon tileblit font bitblit softcursor [ 177.758441] [ 177.758467] Pid: 3172, comm: wvdialconf Tainted: P (2.6.28-11-generic #37-Ubuntu) Satellite A200 [ 177.758474] EIP: 0060:[<f850ed83>] EFLAGS: 00210296 CPU: 0 [ 177.758662] EIP is at LXSoftModemStart+0x23/0x230 [agrmodem] [ 177.758669] EAX: 00000008 EBX: f7fef8d0 ECX: 00000003 EDX: f7fed400 [ 177.758693] ESI: 00000000 EDI: f7fef8d0 EBP: e5509dac ESP: e5509d24 [ 177.758699] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 177.758724] Process wvdialconf (pid: 3172, ti=e5508000 task=f1ef7110 task.ti=e5508000) [ 177.758729] Stack: [ 177.758733] 00000000 00000008 f8549801 00000000 00000001 c06d3300 00000000 c06d9f0c [ 177.758786] e5509d84 c0193d7b 000280d0 00000044 00000000 00000000 00000001 00000000 [ 177.758821] 00000000 000280d0 00000040 c06d3300 c06d3300 c06d5700 f1ef7110 00000010 [ 177.758859] Call Trace: [ 177.758891] [<c0193d7b>] ? get_page_from_freelist+0xbb/0x150 [ 177.758923] [<c0193ec9>] ? __alloc_pages_internal+0xb9/0x490 [ 177.758955] [<f850a356>] ? linux_modem_open+0x26/0x110 [agrmodem] [ 177.759173] [<f84643c8>] ? modemPortOpen+0x8/0x20 [agrmodem] [ 177.759274] [<f7febd90>] ? serial8250_startup+0x200/0x300 [agrserial] [ 177.759331] [<c034599b>] ? uart_startup+0x4b/0x140 [ 177.759341] [<c03463cb>] ? uart_open+0xab/0x1b0 [ 177.759368] [<c032eab0>] ? __tty_open+0x1b0/0x460 [ 177.759396] [<c032ed7f>] ? tty_open+0x1f/0x40 [ 177.759405] [<c01c01ed>] ? chrdev_open+0xcd/0x1a0 [ 177.759433] [<c01bb7a6>] ? __dentry_open+0xb6/0x260 [ 177.759460] [<c01bba27>] ? nameidata_to_filp+0x47/0x60 [ 177.759469] [<c01c0120>] ? chrdev_open+0x0/0x1a0 [ 177.759496] [<c01c8c89>] ? do_filp_open+0x1c9/0x7b0 [ 177.759524] [<c0502d08>] ? _spin_lock+0x8/0x10 [ 177.759552] [<c01d36dd>] ? mntput_no_expire+0x1d/0x120 [ 177.759562] [<c01d1d90>] ? alloc_fd+0xe0/0x100 [ 177.759588] [<c01bb56f>] ? do_sys_open+0x5f/0x130 [ 177.759597] [<c01bea2f>] ? fput+0x1f/0x30 [ 177.759623] [<c01bb6a9>] ? sys_open+0x29/0x40 [ 177.759649] [<c0103f6b>] ? sysenter_do_call+0x12/0x2f [ 177.759658] [<c0500000>] ? relay_hotcpu_callback+0x4d/0xbd [ 177.759687] Code: 00 89 d8 eb a7 8d 76 00 55 b8 01 98 54 f8 89 e5 57 56 53 83 ec 7c 8b 75 08 89 44 24 08 c7 45 e4 78 56 34 12 8d 46 08 89 44 24 04 <8b> 46 04 89 04 24 e8 e2 13 00 00 85 c0 89 c3 0f 88 68 01 00 00 [ 177.759916] EIP: [<f850ed83>] LXSoftModemStart+0x23/0x230 [agrmodem] SS:ESP 0068:e5509d24 [ 177.760198] ---[ end trace 70ecedf1724c851d ]--- [ 242.048916] CE: hpet increasing min_delta_ns to 15000 nsec [ 827.660586] [drm:i915_getparam] *ERROR* Unknown parameter 6 On Sat, May 9, 2009 at 10:29 PM, rami daoud <ramidawod34@xxxxxxxxx> wrote: > CPU0 CPU1 > 0: 57807 0 IO-APIC-edge timer > 1: 434 0 IO-APIC-edge i8042 > 8: 1 0 IO-APIC-edge rtc0 > 9: 702 0 IO-APIC-fasteoi acpi > 12: 6743 0 IO-APIC-edge i8042 > 14: 8232 0 IO-APIC-edge ata_piix > 15: 10897 0 IO-APIC-edge ata_piix > 16: 2873 0 IO-APIC-fasteoi uhci_hcd:usb5, yenta, > i915@pci:0000:00:02.0 > 17: 51 0 IO-APIC-fasteoi ohci1394, ath > 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4, mmc0, > tifm_7xx1 > 19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 > 22: 2545 0 IO-APIC-fasteoi HDA Intel > 23: 2 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 > NMI: 0 0 Non-maskable interrupts > LOC: 11644 27208 Local timer interrupts > RES: 5552 9080 Rescheduling interrupts > CAL: 28 97 Function call interrupts > TLB: 31 112 TLB shootdowns > SPU: 0 0 Spurious interrupts > ERR: 0 > MIS: 0 > > Module Size Used by > agrserial 18848 2 > agrmodem 1192868 1 agrserial > i915 65668 2 > drm 96424 3 i915 > binfmt_misc 16776 1 > ppdev 15492 0 > bridge 56340 0 > stp 10500 1 bridge > bnep 20224 2 > lp 17156 0 > parport 42220 2 ppdev,lp > joydev 18368 0 > snd_hda_intel 435508 3 > snd_pcm_oss 46336 0 > snd_mixer_oss 22656 1 snd_pcm_oss > pcmcia 44748 0 > snd_pcm 82820 2 snd_hda_intel,snd_pcm_oss > snd_seq_dummy 10756 0 > snd_seq_oss 37760 0 > snd_seq_midi 14336 0 > arc4 9856 2 > snd_rawmidi 29696 1 snd_seq_midi > ecb 10752 2 > snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi > snd_seq 56880 6 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > snd_timer 29704 2 snd_pcm,snd_seq > snd_seq_device 14988 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > yenta_socket 32396 1 > rsrc_nonstatic 19328 1 yenta_socket > iTCO_wdt 19108 0 > iTCO_vendor_support 11652 1 iTCO_wdt > tifm_7xx1 13824 0 > ath5k 107008 0 > snd 62628 15 > snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > psmouse 61972 0 > soundcore 15200 1 snd > pcmcia_core 43540 3 pcmcia,yenta_socket,rsrc_nonstatic > tifm_core 15900 1 tifm_7xx1 > pcspkr 10496 0 > serio_raw 13316 0 > sdhci_pci 15232 0 > sdhci 23940 1 sdhci_pci > btusb 19608 2 > input_polldev 11912 0 > intel_agp 34108 1 > snd_page_alloc 16904 2 snd_hda_intel,snd_pcm > mac80211 217080 1 ath5k > video 25360 0 > led_class 12036 1 ath5k > output 11008 1 video > cfg80211 38032 2 ath5k,mac80211 > agpgart 42696 3 drm,intel_agp > ohci1394 38576 0 > ieee1394 94660 1 ohci1394 > r8169 40836 0 > mii 13312 1 r8169 > fbcon 46112 0 > tileblit 10752 1 fbcon > font 16384 1 fbcon > bitblit 13824 1 fbcon > softcursor 9984 1 bitblit > > [ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version > 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #37-Ubuntu SMP Mon Mar 23 16:40:23 UTC 2009 > (Ubuntu 2.6.28-11.37-generic) > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] NSC Geode by NSC > [ 0.000000] Cyrix CyrixInstead > [ 0.000000] Centaur CentaurHauls > [ 0.000000] Transmeta GenuineTMx86 > [ 0.000000] Transmeta TransmetaCPU > [ 0.000000] UMC UMC UMC UMC > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) > [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) > [ 0.000000] DMI present. > [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 > [ 0.000000] Scanning 2 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) > [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) > [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) > [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 0000000000092800 (usable) > [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) > [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) > [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) > [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) > [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) > [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) > [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) > [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 > [ 0.000000] RAMDISK: 378be000 - 37fef6aa > [ 0.000000] Allocated new RAMDISK: 00881000 - 00fb26aa > [ 0.000000] Move RAMDISK from 00000000378be000 - 0000000037fef6a9 to > 00881000 - 00fb26a9 > [ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL) > [ 0.000000] ACPI: RSDT 3F687429, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP > 0) > [ 0.000000] ACPI: FACP 3F68FC78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR > 5A) > [ 0.000000] ACPI: DSDT 3F689194, 6AE4 (r1 TOSCPL CALISTGA 6040000 INTL > 20060608) > [ 0.000000] ACPI: FACS 3F690FC0, 0040 > [ 0.000000] ACPI: SLIC 3F68FCEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR > 0) > [ 0.000000] ACPI: APIC 3F68FE62, 0068 (r1 INTEL CALISTGA 6040000 LOHR > 5A) > [ 0.000000] ACPI: HPET 3F68FECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR > 5A) > [ 0.000000] ACPI: MCFG 3F68FF02, 003C (r1 INTEL CALISTGA 6040000 LOHR > 5A) > [ 0.000000] ACPI: BOOT 3F68FFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP > 1) > [ 0.000000] ACPI: APIC 3F68FF70, 0068 (r1 PTLTD APIC 6040000 LTP > 0) > [ 0.000000] ACPI: SSDT 3F688B41, 064F (r1 SataRe SataPri 1000 INTL > 20050624) > [ 0.000000] ACPI: SSDT 3F6884AF, 0692 (r1 SataRe SataSec 1000 INTL > 20050624) > [ 0.000000] ACPI: SSDT 3F687A09, 025F (r1 PmRef Cpu0Tst 3000 INTL > 20050624) > [ 0.000000] ACPI: SSDT 3F687963, 00A6 (r1 PmRef Cpu1Tst 3000 INTL > 20050624) > [ 0.000000] ACPI: SSDT 3F68747D, 04E6 (r1 PmRef CpuPm 3000 INTL > 20050624) > [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 > [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify > linux-acpi@xxxxxxxxxxxxxxx > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] 130MB HIGHMEM available. > [ 0.000000] 883MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 373fe000 > [ 0.000000] low ram: 00000000 - 373fe000 > [ 0.000000] bootmap 00012000 - 00018e80 > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> > [0000001000 - 0000002000] > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> > [0000006000 - 0000007000] > [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> > [0000100000 - 000087c52c] > [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> > [000087d000 - 0000881000] > [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> > [000009f800 - 0000100000] > [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> > [0000010000 - 0000012000] > [ 0.000000] #7 [0000881000 - 0000fb26aa] NEW RAMDISK ==> > [0000881000 - 0000fb26aa] > [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> > [0000012000 - 0000019000] > [ 0.000000] found SMP MP-table at [c00f7670] 000f7670 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x000373fe > [ 0.000000] HighMem 0x000373fe -> 0x0003f680 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[4] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x00000002 > [ 0.000000] 0: 0x00000006 -> 0x00000007 > [ 0.000000] 0: 0x00000010 -> 0x00000092 > [ 0.000000] 0: 0x00000100 -> 0x0003f680 > [ 0.000000] On node 0 totalpages: 259589 > [ 0.000000] free_area_init_node: node 0, pgdat c06d0f00, node_mem_map > c1000000 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1736 pages used for memmap > [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 262 pages used for memmap > [ 0.000000] HighMem zone: 33148 pages, LIFO batch:7 > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: 0000000000002000 - > 0000000000006000 > [ 0.000000] PM: Registered nosave memory: 0000000000007000 - > 0000000000010000 > [ 0.000000] PM: Registered nosave memory: 0000000000092000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000dc000 > [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 50000000 (gap: > 40000000:a0000000) > [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data > [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 257559 > [ 0.000000] Kernel command line: > root=UUID=7acd6881-5ad3-4f4a-8efe-23f545d1ba23 ro quiet splash > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 1728.729 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes) > [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.004000] allocated 5194240 bytes of page_cgroup > [ 0.004000] please try cgroup_disable=memory option if you don't want > [ 0.004000] Scanning for low memory corruption every 60 seconds > [ 0.004000] Memory: 1008772k/1038848k available (4126k kernel code, > 29192k reserved, 2208k data, 532k init, 133640k highmem) > [ 0.004000] virtual kernel memory layout: > [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) > [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) > [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) > [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) > [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) > [ 0.004000] .data : 0xc0507a7f - 0xc072fe60 (2208 kB) > [ 0.004000] .text : 0xc0100000 - 0xc0507a7f (4126 kB) > [ 0.004000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, > CPUs=2, Nodes=1 > [ 0.004000] hpet clockevent registered > [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu > timer > [ 0.004000] Calibrating delay loop (skipped), value calculated using > timer frequency.. 3457.45 BogoMIPS (lpj=6914916) > [ 0.004000] Security Framework initialized > [ 0.004000] SELinux: Disabled at boot. > [ 0.004000] AppArmor: AppArmor initialized > [ 0.004000] Mount-cache hash table entries: 512 > [ 0.004000] Initializing cgroup subsys ns > [ 0.004000] Initializing cgroup subsys cpuacct > [ 0.004000] Initializing cgroup subsys memory > [ 0.004000] Initializing cgroup subsys freezer > [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.004000] CPU: L2 cache: 1024K > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 0 > [ 0.004000] using mwait in idle threads. > [ 0.004000] Checking 'hlt' instruction... OK. > [ 0.019262] ACPI: Core revision 20080926 > [ 0.022190] ACPI: Checking initramfs for custom DSDT > [ 0.380403] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.420095] CPU0: Genuine Intel(R) CPU T2080 @ 1.73GHz > stepping 0c > [ 0.424001] Booting processor 1 APIC 0x1 ip 0x6000 > [ 0.004000] Initializing CPU#1 > [ 0.004000] Calibrating delay using timer specific routine.. 3458.00 > BogoMIPS (lpj=6916002) > [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.004000] CPU: L2 cache: 1024K > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 1 > [ 0.508399] CPU1: Genuine Intel(R) CPU T2080 @ 1.73GHz > stepping 0c > [ 0.508421] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.512051] Brought up 2 CPUs > [ 0.512054] Total of 2 processors activated (6915.45 BogoMIPS). > [ 0.512118] CPU0 attaching sched-domain: > [ 0.512121] domain 0: span 0-1 level MC > [ 0.512124] groups: 0 1 > [ 0.512132] CPU1 attaching sched-domain: > [ 0.512134] domain 0: span 0-1 level MC > [ 0.512137] groups: 1 0 > [ 0.512225] net_namespace: 776 bytes > [ 0.512232] Booting paravirtualized kernel on bare hardware > [ 0.512426] Time: 18:06:05 Date: 05/09/09 > [ 0.512426] regulator: core version 0.5 > [ 0.512426] NET: Registered protocol family 16 > [ 0.512426] EISA bus registered > [ 0.512426] ACPI: bus type pci registered > [ 0.512426] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - > 255 > [ 0.512426] PCI: MCFG area at e0000000 reserved in E820 > [ 0.512426] PCI: Using MMCONFIG for extended config space > [ 0.512426] PCI: Using configuration type 1 for base access > [ 0.513345] ACPI: EC: Look up EC in DSDT > [ 0.520081] ACPI: BIOS _OSI(Linux) query ignored > [ 0.521186] ACPI: Interpreter enabled > [ 0.521191] ACPI: (supports S0 S3 S4 S5) > [ 0.521212] ACPI: Using IOAPIC for interrupt routing > [ 0.529275] ACPI: EC: non-query interrupt received, switching to > interrupt mode > [ 0.530927] ACPI: EC: GPE storm detected, transactions will use polling > mode > [ 0.572868] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 > [ 0.572871] ACPI: EC: driver started in interrupt mode > [ 0.573060] ACPI: No dock devices found. > [ 0.573072] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.573170] pci 0000:00:02.0: reg 10 32bit mmio: [0xdc100000-0xdc17ffff] > [ 0.573176] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] > [ 0.573182] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] > [ 0.573187] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdc200000-0xdc23ffff] > [ 0.573225] pci 0000:00:02.1: reg 10 32bit mmio: [0xdc180000-0xdc1fffff] > [ 0.573347] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdc440000-0xdc443fff] > [ 0.573390] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.573396] pci 0000:00:1b.0: PME# disabled > [ 0.573466] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.573471] pci 0000:00:1c.0: PME# disabled > [ 0.573544] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.573550] pci 0000:00:1c.1: PME# disabled > [ 0.573623] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 0.573628] pci 0000:00:1c.2: PME# disabled > [ 0.573697] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] > [ 0.573763] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] > [ 0.573828] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] > [ 0.573894] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] > [ 0.573963] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdc444000-0xdc4443ff] > [ 0.574013] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.574019] pci 0000:00:1d.7: PME# disabled > [ 0.574186] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 > ACPI/GPIO/TCO > [ 0.574191] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 > GPIO > [ 0.574245] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] > [ 0.574254] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] > [ 0.574262] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] > [ 0.574271] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] > [ 0.574280] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf] > [ 0.574306] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.574311] pci 0000:00:1f.2: PME# disabled > [ 0.574376] pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df] > [ 0.574468] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] > [ 0.574474] pci 0000:00:1c.0: bridge 32bit mmio: [0xd6000000-0xd7ffffff] > [ 0.574483] pci 0000:00:1c.0: bridge 64bit mmio pref: > [0xd0000000-0xd1ffffff] > [ 0.574559] pci 0000:04:00.0: reg 10 64bit mmio: [0xd8000000-0xd800ffff] > [ 0.574695] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] > [ 0.574701] pci 0000:00:1c.1: bridge 32bit mmio: [0xd8000000-0xd9ffffff] > [ 0.574710] pci 0000:00:1c.1: bridge 64bit mmio pref: > [0xd2000000-0xd3ffffff] > [ 0.574789] pci 0000:05:00.0: reg 10 io port: [0x4000-0x40ff] > [ 0.574821] pci 0000:05:00.0: reg 18 64bit mmio: [0xda000000-0xda000fff] > [ 0.574852] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] > [ 0.574869] pci 0000:05:00.0: supports D1 D2 > [ 0.574872] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold > [ 0.574879] pci 0000:05:00.0: PME# disabled > [ 0.574952] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] > [ 0.574958] pci 0000:00:1c.2: bridge 32bit mmio: [0xda000000-0xdbffffff] > [ 0.574967] pci 0000:00:1c.2: bridge 64bit mmio pref: > [0xd4000000-0xd5ffffff] > [ 0.575026] pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff] > [ 0.575041] pci 0000:06:04.0: supports D1 D2 > [ 0.575043] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.575049] pci 0000:06:04.0: PME# disabled > [ 0.575101] pci 0000:06:04.1: reg 10 32bit mmio: [0xdc005000-0xdc0057ff] > [ 0.575112] pci 0000:06:04.1: reg 14 32bit mmio: [0xdc000000-0xdc003fff] > [ 0.575164] pci 0000:06:04.1: supports D1 D2 > [ 0.575167] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot > [ 0.575173] pci 0000:06:04.1: PME# disabled > [ 0.575223] pci 0000:06:04.2: reg 10 32bit mmio: [0xdc004000-0xdc004fff] > [ 0.575281] pci 0000:06:04.2: supports D1 D2 > [ 0.575284] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot > [ 0.575290] pci 0000:06:04.2: PME# disabled > [ 0.575340] pci 0000:06:04.3: reg 10 32bit mmio: [0xdc005800-0xdc0058ff] > [ 0.575397] pci 0000:06:04.3: supports D1 D2 > [ 0.575400] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot > [ 0.575406] pci 0000:06:04.3: PME# disabled > [ 0.575475] pci 0000:00:1e.0: transparent bridge > [ 0.575483] pci 0000:00:1e.0: bridge 32bit mmio: [0xdc000000-0xdc0fffff] > [ 0.575542] bus 00 -> node 0 > [ 0.575550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.575961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > [ 0.576138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > [ 0.576308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > [ 0.576487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > [ 0.584134] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 > 15) > [ 0.584276] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 > 15) *10 > [ 0.584415] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 > 15) *11 > [ 0.584554] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 > 15) > [ 0.584691] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 > 15) *0, disabled. > [ 0.584829] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 > 15) *0, disabled. > [ 0.584969] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 > 15) *11 > [ 0.585107] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 > 15) > [ 0.585533] ACPI: WMI: Mapper loaded > [ 0.585590] SCSI subsystem initialized > [ 0.585590] libata version 3.00 loaded. > [ 0.585590] usbcore: registered new interface driver usbfs > [ 0.585590] usbcore: registered new interface driver hub > [ 0.585590] usbcore: registered new device driver usb > [ 0.585590] PCI: Using ACPI for IRQ routing > [ 0.592011] Bluetooth: Core ver 2.13 > [ 0.592032] NET: Registered protocol family 31 > [ 0.592032] Bluetooth: HCI device and connection manager initialized > [ 0.592032] Bluetooth: HCI socket layer initialized > [ 0.592032] NET: Registered protocol family 8 > [ 0.592032] NET: Registered protocol family 20 > [ 0.592041] NetLabel: Initializing > [ 0.592043] NetLabel: domain hash size = 128 > [ 0.592045] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.592062] NetLabel: unlabeled traffic allowed by default > [ 0.592082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.592088] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 0.596078] AppArmor: AppArmor Filesystem Enabled > [ 0.600015] Switched to high resolution mode on CPU 0 > [ 0.600469] Switched to high resolution mode on CPU 1 > [ 0.604013] pnp: PnP ACPI init > [ 0.604026] ACPI: bus type pnp registered > [ 1.112021] ACPI: EC: missing confirmations, switch off interrupt mode. > [ 1.118075] pnp: PnP ACPI: found 10 devices > [ 1.118078] ACPI: ACPI bus type pnp unregistered > [ 1.118100] PnPBIOS: Disabled by ACPI PNP > [ 1.118130] system 00:01: ioport range 0xfe00-0xfe7f has been reserved > [ 1.118134] system 00:01: ioport range 0xfe80-0xfeff has been reserved > [ 1.118137] system 00:01: ioport range 0xff00-0xff7f has been reserved > [ 1.118141] system 00:01: iomem range 0xe0000000-0xefffffff has been > reserved > [ 1.118162] system 00:01: iomem range 0xfed14000-0xfed17fff has been > reserved > [ 1.118165] system 00:01: iomem range 0xfed18000-0xfed18fff has been > reserved > [ 1.118168] system 00:01: iomem range 0xfed19000-0xfed19fff has been > reserved > [ 1.118172] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been > reserved > [ 1.118193] system 00:01: iomem range 0xfed20000-0xfed3ffff has been > reserved > [ 1.118196] system 00:01: iomem range 0xfed40000-0xfed44fff has been > reserved > [ 1.118199] system 00:01: iomem range 0xfed45000-0xfed8ffff has been > reserved > [ 1.118225] system 00:04: iomem range 0xfed00000-0xfed003ff has been > reserved > [ 1.118234] system 00:06: ioport range 0x800-0x80f has been reserved > [ 1.118238] system 00:06: ioport range 0x1000-0x107f has been reserved > [ 1.118259] system 00:06: ioport range 0x1180-0x11bf has been reserved > [ 1.153538] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > [ 1.153543] pci 0000:00:1c.0: IO window: 0x2000-0x2fff > [ 1.153568] pci 0000:00:1c.0: MEM window: 0xd6000000-0xd7ffffff > [ 1.153574] pci 0000:00:1c.0: PREFETCH window: > 0x000000d0000000-0x000000d1ffffff > [ 1.153601] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 > [ 1.153605] pci 0000:00:1c.1: IO window: 0x3000-0x3fff > [ 1.153612] pci 0000:00:1c.1: MEM window: 0xd8000000-0xd9ffffff > [ 1.153635] pci 0000:00:1c.1: PREFETCH window: > 0x000000d2000000-0x000000d3ffffff > [ 1.153645] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 > [ 1.153667] pci 0000:00:1c.2: IO window: 0x4000-0x4fff > [ 1.153674] pci 0000:00:1c.2: MEM window: 0xda000000-0xdbffffff > [ 1.153697] pci 0000:00:1c.2: PREFETCH window: > 0x000000d4000000-0x000000d5ffffff > [ 1.153731] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 > [ 1.153734] pci 0000:06:04.0: IO window: 0x005000-0x0050ff > [ 1.153739] pci 0000:06:04.0: IO window: 0x005400-0x0054ff > [ 1.153763] pci 0000:06:04.0: PREFETCH window: 0x50000000-0x53ffffff > [ 1.153769] pci 0000:06:04.0: MEM window: 0x54000000-0x57ffffff > [ 1.153793] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 > [ 1.153797] pci 0000:00:1e.0: IO window: 0x5000-0x5fff > [ 1.153804] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff > [ 1.153827] pci 0000:00:1e.0: PREFETCH window: > 0x00000050000000-0x00000053ffffff > [ 1.153865] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 1.153890] pci 0000:00:1c.0: setting latency timer to 64 > [ 1.153901] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > [ 1.153924] pci 0000:00:1c.1: setting latency timer to 64 > [ 1.153953] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 1.153958] pci 0000:00:1c.2: setting latency timer to 64 > [ 1.153985] pci 0000:00:1e.0: setting latency timer to 64 > [ 1.153996] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 1.154021] bus: 00 index 0 io port: [0x00-0xffff] > [ 1.154024] bus: 00 index 1 mmio: [0x000000-0xffffffff] > [ 1.154027] bus: 02 index 0 io port: [0x2000-0x2fff] > [ 1.154029] bus: 02 index 1 mmio: [0xd6000000-0xd7ffffff] > [ 1.154050] bus: 02 index 2 mmio: [0xd0000000-0xd1ffffff] > [ 1.154052] bus: 02 index 3 mmio: [0x0-0x0] > [ 1.154055] bus: 04 index 0 io port: [0x3000-0x3fff] > [ 1.154058] bus: 04 index 1 mmio: [0xd8000000-0xd9ffffff] > [ 1.154060] bus: 04 index 2 mmio: [0xd2000000-0xd3ffffff] > [ 1.154081] bus: 04 index 3 mmio: [0x0-0x0] > [ 1.154083] bus: 05 index 0 io port: [0x4000-0x4fff] > [ 1.154086] bus: 05 index 1 mmio: [0xda000000-0xdbffffff] > [ 1.154088] bus: 05 index 2 mmio: [0xd4000000-0xd5ffffff] > [ 1.154091] bus: 05 index 3 mmio: [0x0-0x0] > [ 1.154093] bus: 06 index 0 io port: [0x5000-0x5fff] > [ 1.154113] bus: 06 index 1 mmio: [0xdc000000-0xdc0fffff] > [ 1.154116] bus: 06 index 2 mmio: [0x50000000-0x53ffffff] > [ 1.154119] bus: 06 index 3 io port: [0x00-0xffff] > [ 1.154121] bus: 06 index 4 mmio: [0x000000-0xffffffff] > [ 1.154124] bus: 07 index 0 io port: [0x5000-0x50ff] > [ 1.154144] bus: 07 index 1 io port: [0x5400-0x54ff] > [ 1.154147] bus: 07 index 2 mmio: [0x50000000-0x53ffffff] > [ 1.154149] bus: 07 index 3 mmio: [0x54000000-0x57ffffff] > [ 1.154179] NET: Registered protocol family 2 > [ 1.168176] IP route cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 1.168851] TCP established hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 1.170229] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > [ 1.171020] TCP: Hash tables configured (established 131072 bind 65536) > [ 1.171024] TCP reno registered > [ 1.176245] NET: Registered protocol family 1 > [ 1.176592] checking if image is initramfs... it is > [ 2.785077] Freeing initrd memory: 7365k freed > [ 2.785175] Simple Boot Flag at 0x36 set to 0x1 > [ 2.785676] cpufreq: No nForce2 chipset. > [ 2.786033] audit: initializing netlink socket (disabled) > [ 2.786095] type=2000 audit(1241892366.784:1): initialized > [ 2.809070] highmem bounce pool size: 64 pages > [ 2.809077] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 2.812677] VFS: Disk quotas dquot_6.5.1 > [ 2.812836] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 2.814490] fuse init (API version 7.10) > [ 2.814735] msgmni has been set to 1724 > [ 2.815246] alg: No test for stdrng (krng) > [ 2.815280] io scheduler noop registered > [ 2.815282] io scheduler anticipatory registered > [ 2.815285] io scheduler deadline registered > [ 2.815337] io scheduler cfq registered (default) > [ 2.815370] pci 0000:00:02.0: Boot video device > [ 2.868530] pcieport-driver 0000:00:1c.0: setting latency timer to 64 > [ 2.868637] pcieport-driver 0000:00:1c.0: found MSI capability > [ 2.868730] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X > [ 2.868765] pci_express 0000:00:1c.0:pcie00: allocate port service > [ 2.868818] pci_express 0000:00:1c.0:pcie02: allocate port service > [ 2.868850] pci_express 0000:00:1c.0:pcie03: allocate port service > [ 2.869040] pcieport-driver 0000:00:1c.1: setting latency timer to 64 > [ 2.869145] pcieport-driver 0000:00:1c.1: found MSI capability > [ 2.869233] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X > [ 2.869267] pci_express 0000:00:1c.1:pcie00: allocate port service > [ 2.869300] pci_express 0000:00:1c.1:pcie02: allocate port service > [ 2.869333] pci_express 0000:00:1c.1:pcie03: allocate port service > [ 2.869500] pcieport-driver 0000:00:1c.2: setting latency timer to 64 > [ 2.869622] pcieport-driver 0000:00:1c.2: found MSI capability > [ 2.869692] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X > [ 2.869745] pci_express 0000:00:1c.2:pcie00: allocate port service > [ 2.869782] pci_express 0000:00:1c.2:pcie02: allocate port service > [ 2.869814] pci_express 0000:00:1c.2:pcie03: allocate port service > [ 2.870011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 2.870710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 2.871063] ACPI: AC Adapter [ACAD] (on-line) > [ 3.010046] ACPI: Battery Slot [BAT1] (battery present) > [ 3.010233] input: Power Button (FF) as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > [ 3.010237] ACPI: Power Button (FF) [PWRF] > [ 3.010356] input: Lid Switch as > /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 > [ 3.010460] ACPI: Lid Switch [LID0] > [ 3.010580] input: Power Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 > [ 3.010583] ACPI: Power Button (CM) [PWRB] > [ 3.012115] ACPI: SSDT 3F6881AF, 0238 (r1 PmRef Cpu0Ist 3000 INTL > 20050624) > [ 3.013195] ACPI: SSDT 3F687C68, 04C2 (r1 PmRef Cpu0Cst 3001 INTL > 20050624) > [ 3.019463] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > [ 3.019528] processor ACPI_CPU:00: registered as cooling_device0 > [ 3.019533] ACPI: Processor [CPU0] (supports 8 throttling states) > [ 3.020517] ACPI: SSDT 3F6883E7, 00C8 (r1 PmRef Cpu1Ist 3000 INTL > 20050624) > [ 3.021494] ACPI: SSDT 3F68812A, 0085 (r1 PmRef Cpu1Cst 3000 INTL > 20050624) > [ 3.023535] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > [ 3.023575] processor ACPI_CPU:01: registered as cooling_device1 > [ 3.023598] ACPI: Processor [CPU1] (supports 8 throttling states) > [ 3.052668] isapnp: Scanning for PnP cards... > [ 3.419406] isapnp: No Plug & Play device found > [ 3.433644] Serial: 8250/16550 driver4 ports, IRQ sharing enabled > [ 3.436346] brd: module loaded > [ 3.437180] loop: module loaded > [ 3.437368] Fixed MDIO Bus: probed > [ 3.437375] PPP generic driver version 2.4.2 > [ 3.437533] input: Macintosh mouse button emulation as > /devices/virtual/input/input3 > [ 3.437629] Driver 'sd' needs updating - please use bus_type methods > [ 3.437657] Driver 'sr' needs updating - please use bus_type methods > [ 3.437853] ata_piix 0000:00:1f.2: version 2.12 > [ 3.437910] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 3.437916] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] > [ 3.592064] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 3.592316] scsi0 : ata_piix > [ 3.592576] scsi1 : ata_piix > [ 3.595316] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq > 14 > [ 3.595319] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq > 15 > [ 3.757025] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7DP, max > UDMA/100 > [ 3.757047] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 3.773066] ata1.00: configured for UDMA/100 > [ 3.953465] ata2.00: ATAPI: PIONEER DVD-RW DVR-K17A, 1.51, max UDMA/33 > [ 3.985553] ata2.00: configured for UDMA/33 > [ 3.999659] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 > SBDO PQ: 0 ANSI: 5 > [ 3.999912] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 > GB/111 GiB) > [ 3.999968] sd 0:0:0:0: [sda] Write Protect is off > [ 3.999971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 4.000062] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 4.000250] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 > GB/111 GiB) > [ 4.000286] sd 0:0:0:0: [sda] Write Protect is off > [ 4.000288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 4.000353] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 4.000358] sda: sda1 sda2 < sda5 sda6 sda7 > > [ 4.449680] sd 0:0:0:0: [sda] Attached SCSI disk > [ 4.449807] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 4.459706] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17A > 1.51 PQ: 0 ANSI: 5 > [ 4.490686] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 > cdda tray > [ 4.490690] Uniform CD-ROM driver Revision: 3.20 > [ 4.490920] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 4.491037] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 4.492791] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 4.492858] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > [ 4.492922] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 4.492927] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 4.493085] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus > number 1 > [ 4.497067] ehci_hcd 0000:00:1d.7: debug port 1 > [ 4.497093] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 4.497129] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000 > [ 4.512024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 4.512238] usb usb1: configuration #1 chosen from 1 choice > [ 4.512305] hub 1-0:1.0: USB hub found > [ 4.512333] hub 1-0:1.0: 8 ports detected > [ 4.512655] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 4.512693] uhci_hcd: USB Universal Host Controller Interface driver > [ 4.512778] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > [ 4.512787] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 4.512791] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 4.512907] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus > number 2 > [ 4.512971] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 > [ 4.513166] usb usb2: configuration #1 chosen from 1 choice > [ 4.513231] hub 2-0:1.0: USB hub found > [ 4.513256] hub 2-0:1.0: 2 ports detected > [ 4.513458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 4.513482] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 4.513486] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 4.513608] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus > number 3 > [ 4.513681] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 > [ 4.513868] usb usb3: configuration #1 chosen from 1 choice > [ 4.513932] hub 3-0:1.0: USB hub found > [ 4.513939] hub 3-0:1.0: 2 ports detected > [ 4.514163] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> > IRQ 18 > [ 4.514188] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 4.514192] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 4.514311] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus > number 4 > [ 4.514382] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 > [ 4.514575] usb usb4: configuration #1 chosen from 1 choice > [ 4.514641] hub 4-0:1.0: USB hub found > [ 4.514666] hub 4-0:1.0: 2 ports detected > [ 4.514883] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> > IRQ 16 > [ 4.514890] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > [ 4.514894] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 4.515013] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus > number 5 > [ 4.515083] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 > [ 4.515276] usb usb5: configuration #1 chosen from 1 choice > [ 4.515341] hub 5-0:1.0: USB hub found > [ 4.515366] hub 5-0:1.0: 2 ports detected > [ 4.515683] usbcore: registered new interface driver libusual > [ 4.515755] usbcore: registered new interface driver usbserial > [ 4.515787] USB Serial support registered for generic > [ 4.515821] usbcore: registered new interface driver usbserial_generic > [ 4.515841] usbserial: USB Serial Driver core > [ 4.515970] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 > irq 1,12 > [ 4.516554] i8042.c: Detected active multiplexing controller, rev 1.1. > [ 4.516745] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 4.516752] serio: i8042 AUX0 port at 0x60,0x64 irq 12 > [ 4.516755] serio: i8042 AUX1 port at 0x60,0x64 irq 12 > [ 4.516758] serio: i8042 AUX2 port at 0x60,0x64 irq 12 > [ 4.516779] serio: i8042 AUX3 port at 0x60,0x64 irq 12 > [ 4.520120] mice: PS/2 mouse device common for all mice > [ 4.536186] rtc_cmos 00:07: RTC can wake from S4 > [ 4.536260] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 > [ 4.536347] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs > [ 4.536542] device-mapper: uevent: version 1.0.3 > [ 4.536839] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: > dm-devel@xxxxxxxxxx > [ 4.537059] device-mapper: multipath: version 1.0.5 loaded > [ 4.537062] device-mapper: multipath round-robin: version 1.0.0 loaded > [ 4.537308] EISA: Probing bus 0 at eisa.0 > [ 4.537316] Cannot allocate resource for EISA slot 1 > [ 4.537319] Cannot allocate resource for EISA slot 2 > [ 4.537340] Cannot allocate resource for EISA slot 3 > [ 4.537343] Cannot allocate resource for EISA slot 4 > [ 4.537345] Cannot allocate resource for EISA slot 5 > [ 4.537378] EISA: Detected 0 cards. > [ 4.537698] cpuidle: using governor ladder > [ 4.538021] cpuidle: using governor menu > [ 4.538756] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input4 > [ 4.539411] TCP cubic registered > [ 4.539672] NET: Registered protocol family 10 > [ 4.540792] lo: Disabled Privacy Extensions > [ 4.541008] Marking TSC unstable due to TSC halts in idle > [ 4.541678] NET: Registered protocol family 17 > [ 4.541715] Bluetooth: L2CAP ver 2.11 > [ 4.541735] Bluetooth: L2CAP socket layer initialized > [ 4.541738] Bluetooth: SCO (Voice Link) ver 0.6 > [ 4.541740] Bluetooth: SCO socket layer initialized > [ 4.541880] Bluetooth: RFCOMM socket layer initialized > [ 4.541889] Bluetooth: RFCOMM TTY layer initialized > [ 4.541909] Bluetooth: RFCOMM ver 1.10 > [ 4.543363] Using IPI No-Shortcut mode > [ 4.543551] registered taskstats version 1 > [ 4.543867] Magic number: 9:642:139 > [ 4.543904] block ram4: hash matches > [ 4.543973] acpi device:10: hash matches > [ 4.544103] rtc_cmos 00:07: setting system clock to 2009-05-09 18:06:09 > UTC (1241892369) > [ 4.544126] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 4.544128] EDD information not available. > [ 4.544859] Freeing unused kernel memory: 532k freed > [ 4.545316] Write protecting the kernel text: 4128k > [ 4.545476] Write protecting the kernel read-only data: 1532k > [ 5.112759] usb 5-2: new full speed USB device using uhci_hcd and address > 2 > [ 5.113143] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 5.113184] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ > 18 > [ 5.113242] r8169 0000:05:00.0: setting latency timer to 64 > [ 5.113599] r8169 0000:05:00.0: irq 2300 for MSI/MSI-X > [ 5.115320] eth0: RTL8101e at 0xf7c7c000, 00:16:d4:f9:26:b8, XID 34000000 > IRQ 2300 > [ 5.241242] ohci1394 0000:06:04.1: PCI INT B -> GSI 17 (level, low) -> > IRQ 17 > [ 5.291554] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] > MMIO=[dc005000-dc0057ff] Max Packet=[2048] IR/IT contexts=[4/8] > [ 5.333423] usb 5-2: configuration #1 chosen from 1 choice > [ 5.889758] PM: Starting manual resume from disk > [ 5.889763] PM: Resume from partition 8:7 > [ 5.889765] PM: Checking hibernation image. > [ 5.890202] PM: Resume from disk failed. > [ 5.931573] kjournald starting. Commit interval 5 seconds > [ 5.931621] EXT3-fs: mounted filesystem with ordered data mode. > [ 6.609037] ieee1394: Host added: ID:BUS[0-00:1023] > GUID[00023f74bb412bb1] > [ 11.083426] udev: starting version 140 > [ 11.361433] Linux agpgart interface v0.103 > [ 11.416233] cfg80211: Calling CRDA to update world regulatory domain > [ 11.580746] acpi device:0a: registered as cooling_device2 > [ 11.581128] input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input5 > [ 11.599776] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: > no) > [ 11.793181] agpgart-intel 0000:00:00.0: Intel 945GM Chipset > [ 11.794078] agpgart-intel 0000:00:00.0: detected 7932K stolen memory > [ 11.801154] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 > [ 12.106852] intel_rng: FWH not detected > [ 12.135981] Bluetooth: Generic Bluetooth USB driver ver 0.3 > [ 12.136238] usbcore: registered new interface driver btusb > [ 12.154990] sdhci: Secure Digital Host Controller Interface driver > [ 12.155012] sdhci: Copyright(c) Pierre Ossman > [ 12.159354] sdhci-pci 0000:06:04.3: SDHCI controller found [104c:803c] > (rev 0) > [ 12.159392] sdhci-pci 0000:06:04.3: PCI INT C -> GSI 18 (level, low) -> > IRQ 18 > [ 12.159698] mmc0: SDHCI controller on PCI [0000:06:04.3] using DMA > [ 12.232314] cfg80211: World regulatory domain updated: > [ 12.232319] (start_freq - end_freq @ bandwidth), (max_antenna_gain, > max_eirp) > [ 12.232341] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 12.232344] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 12.232347] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 12.232350] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 12.232353] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 12.269796] input: PC Speaker as /devices/platform/pcspkr/input/input6 > [ 12.435500] ath5k_pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> > IRQ 17 > [ 12.435532] ath5k_pci 0000:04:00.0: setting latency timer to 64 > [ 12.435759] ath5k_pci 0000:04:00.0: registered as 'phy0' > [ 12.441901] tifm_7xx1 0000:06:04.2: PCI INT C -> GSI 18 (level, low) -> > IRQ 18 > [ 12.452131] iTCO_vendor_support: vendor-support=0 > [ 12.456140] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 > [ 12.456525] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, > TCOBASE=0x1060) > [ 12.456774] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 12.467769] yenta_cardbus 0000:06:04.0: CardBus bridge found [1179:ff00] > [ 12.467830] yenta_cardbus 0000:06:04.0: Enabling burst memory read > transactions > [ 12.467857] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC > interrupts to PCI > [ 12.467859] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI > [ 12.467866] yenta_cardbus 0000:06:04.0: TI: mfunc 0x10aa1b22, devctl 0x64 > [ 12.516260] phy0: Selected rate control algorithm 'pid' > [ 12.557102] synaptics was reset on resume, see synaptics_resume_reset if > you have trouble on resume > [ 12.639076] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa0, PHY: 0x61) > [ 12.699278] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16 > [ 12.699284] yenta_cardbus 0000:06:04.0: Socket status: 30000006 > [ 12.699288] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) > from #06 to #0a > [ 12.699316] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O > window: 0x5000 - 0x5fff > [ 12.699320] pcmcia_socket pcmcia_socket0: cs: IO port probe > 0x5000-0x5fff: clean. > [ 12.699922] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory > window: 0xdc000000 - 0xdc0fffff > [ 12.699926] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory > window: 0x50000000 - 0x53ffffff > [ 12.819631] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > [ 12.819919] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 12.850819] hda_codec: Unknown model for ALC660VD/ALC861VD, trying > auto-probe from BIOS... > [ 13.000091] Clocksource tsc unstable (delta = -84082556 ns) > [ 13.105227] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: > clean. > [ 13.109899] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: > excluding 0x4d0-0x4d7 > [ 13.111812] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: > clean. > [ 13.113491] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: > clean. > [ 13.115524] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: > clean. > [ 13.143344] input: PS/2 Mouse as > /devices/platform/i8042/serio4/input/input7 > [ 13.180494] input: AlpsPS/2 ALPS GlidePoint as > /devices/platform/i8042/serio4/input/input8 > [ 13.365048] lp: driver loaded but no devices found > [ 13.556305] Adding 899600k swap on /dev/sda7. Priority:-1 extents:1 > across:899600k > [ 14.155978] EXT3 FS on sda6, internal journal > [ 15.710948] type=1505 audit(1241881580.663:2): operation="profile_load" > name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1912 > [ 15.853407] type=1505 audit(1241881580.807:3): operation="profile_load" > name="/sbin/dhclient-script" name2="default" pid=1916 > [ 15.853783] type=1505 audit(1241881580.807:4): operation="profile_load" > name="/sbin/dhclient3" name2="default" pid=1916 > [ 15.853920] type=1505 audit(1241881580.807:5): operation="profile_load" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" > pid=1916 > [ 15.854041] type=1505 audit(1241881580.807:6): operation="profile_load" > name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1916 > [ 16.242641] type=1505 audit(1241881581.195:7): operation="profile_load" > name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1921 > [ 16.243154] type=1505 audit(1241881581.195:8): operation="profile_load" > name="/usr/sbin/cupsd" name2="default" pid=1921 > [ 16.322384] type=1505 audit(1241881581.275:9): operation="profile_load" > name="/usr/sbin/tcpdump" name2="default" pid=1925 > [ 20.143032] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 20.143037] Bluetooth: BNEP filters: protocol multicast > [ 20.177591] Bridge firewalling registered > [ 22.229186] ppdev: user-space parallel port driver > [ 24.184435] [drm] Initialized drm 1.1.0 20060810 > [ 24.201277] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 24.201301] pci 0000:00:02.0: setting latency timer to 64 > [ 24.205101] [drm] Initialized i915 1.6.0 20080730 on minor 0 > [ 24.206795] [drm:i915_setparam] *ERROR* unknown parameter 4 > [ 24.206861] [drm:i915_getparam] *ERROR* Unknown parameter 6 > [ 25.933369] [drm:i915_getparam] *ERROR* Unknown parameter 6 > [ 26.047054] r8169: eth0: link down > [ 26.047651] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 26.078341] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 36.522679] [drm:i915_getparam] *ERROR* Unknown parameter 6 > [ 177.454426] agrmodem: module license 'Proprietary' taints kernel. > [ 177.463572] agrsm: created 0 infos > [ 177.463582] Loading module Agere Modem Controller driver version > 2.1.60.0.Linspire (2005-11-16) > [ 177.500553] ttyAGS3 at I/O 0x400 (irq = 3) is a AgereModem > [ 177.500808] agrserial: Loading module Agere Modem Interface driver > version 2.1.60.0.Linspire (2005-11-16) > [ 177.757834] BUG: unable to handle kernel NULL pointer dereference at > 00000004 > [ 177.757865] IP: [<f850ed83>] LXSoftModemStart+0x23/0x230 [agrmodem] > [ 177.758081] *pde = 00000000 > [ 177.758089] Oops: 0000 [#1] SMP > [ 177.758115] last sysfs file: /sys/devices/virtual/tty/ttyAGS3/dev > [ 177.758123] Dumping ftrace buffer: > [ 177.758147] (ftrace buffer empty) > [ 177.758152] Modules linked in: agrserial agrmodem(P) i915 drm binfmt_misc > ppdev bridge stp bnep lp parport joydev snd_hda_intel snd_pcm_oss > snd_mixer_oss pcmcia snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi arc4 > snd_rawmidi ecb snd_seq_midi_event snd_seq snd_timer snd_seq_device > yenta_socket rsrc_nonstatic iTCO_wdt iTCO_vendor_support tifm_7xx1 ath5k snd > psmouse soundcore pcmcia_core tifm_core pcspkr serio_raw sdhci_pci sdhci > btusb input_polldev intel_agp snd_page_alloc mac80211 video led_class output > cfg80211 agpgart ohci1394 ieee1394 r8169 mii fbcon tileblit font bitblit > softcursor > [ 177.758441] > [ 177.758467] Pid: 3172, comm: wvdialconf Tainted: P > (2.6.28-11-generic #37-Ubuntu) Satellite A200 > [ 177.758474] EIP: 0060:[<f850ed83>] EFLAGS: 00210296 CPU: 0 > [ 177.758662] EIP is at LXSoftModemStart+0x23/0x230 [agrmodem] > [ 177.758669] EAX: 00000008 EBX: f7fef8d0 ECX: 00000003 EDX: f7fed400 > [ 177.758693] ESI: 00000000 EDI: f7fef8d0 EBP: e5509dac ESP: e5509d24 > [ 177.758699] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 > [ 177.758724] Process wvdialconf (pid: 3172, ti=e5508000 task=f1ef7110 > task.ti=e5508000) > [ 177.758729] Stack: > [ 177.758733] 00000000 00000008 f8549801 00000000 00000001 c06d3300 > 00000000 c06d9f0c > [ 177.758786] e5509d84 c0193d7b 000280d0 00000044 00000000 00000000 > 00000001 00000000 > [ 177.758821] 00000000 000280d0 00000040 c06d3300 c06d3300 c06d5700 > f1ef7110 00000010 > [ 177.758859] Call Trace: > [ 177.758891] [<c0193d7b>] ? get_page_from_freelist+0xbb/0x150 > [ 177.758923] [<c0193ec9>] ? __alloc_pages_internal+0xb9/0x490 > [ 177.758955] [<f850a356>] ? linux_modem_open+0x26/0x110 [agrmodem] > [ 177.759173] [<f84643c8>] ? modemPortOpen+0x8/0x20 [agrmodem] > [ 177.759274] [<f7febd90>] ? serial8250_startup+0x200/0x300 [agrserial] > [ 177.759331] [<c034599b>] ? uart_startup+0x4b/0x140 > [ 177.759341] [<c03463cb>] ? uart_open+0xab/0x1b0 > [ 177.759368] [<c032eab0>] ? __tty_open+0x1b0/0x460 > [ 177.759396] [<c032ed7f>] ? tty_open+0x1f/0x40 > [ 177.759405] [<c01c01ed>] ? chrdev_open+0xcd/0x1a0 > [ 177.759433] [<c01bb7a6>] ? __dentry_open+0xb6/0x260 > [ 177.759460] [<c01bba27>] ? nameidata_to_filp+0x47/0x60 > [ 177.759469] [<c01c0120>] ? chrdev_open+0x0/0x1a0 > [ 177.759496] [<c01c8c89>] ? do_filp_open+0x1c9/0x7b0 > [ 177.759524] [<c0502d08>] ? _spin_lock+0x8/0x10 > [ 177.759552] [<c01d36dd>] ? mntput_no_expire+0x1d/0x120 > [ 177.759562] [<c01d1d90>] ? alloc_fd+0xe0/0x100 > [ 177.759588] [<c01bb56f>] ? do_sys_open+0x5f/0x130 > [ 177.759597] [<c01bea2f>] ? fput+0x1f/0x30 > [ 177.759623] [<c01bb6a9>] ? sys_open+0x29/0x40 > [ 177.759649] [<c0103f6b>] ? sysenter_do_call+0x12/0x2f > [ 177.759658] [<c0500000>] ? relay_hotcpu_callback+0x4d/0xbd > [ 177.759687] Code: 00 89 d8 eb a7 8d 76 00 55 b8 01 98 54 f8 89 e5 57 56 > 53 83 ec 7c 8b 75 08 89 44 24 08 c7 45 e4 78 56 34 12 8d 46 08 89 44 24 04 > <8b> 46 04 89 04 24 e8 e2 13 00 00 85 c0 89 c3 0f 88 68 01 00 00 > [ 177.759916] EIP: [<f850ed83>] LXSoftModemStart+0x23/0x230 [agrmodem] > SS:ESP 0068:e5509d24 > [ 177.760198] ---[ end trace 70ecedf1724c851d ]--- > [ 242.048916] CE: hpet increasing min_delta_ns to 15000 nsec > [ 827.660586] [drm:i915_getparam] *ERROR* Unknown parameter 6 > > > --- On Sat, 5/9/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > > From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > Subject: Re: Rami, Syria kernel 2.6.28-11-generic > To: "rami daoud" <ramidawod34@xxxxxxxxx> > Date: Saturday, May 9, 2009, 10:12 PM > > Rami, > > Others are having success with these drivers. > So not sure we can correct on your System. But do: > $ cat /proc/interrupts >> rami.txt > $ echo >> rami.txt > $ lsmod >> rami.txt > $ echo >> rami.txt > $ dmesg >> rami.txt > > and send me the rami.txt > > MarvS > > On Sat, May 9, 2009 at 9:14 PM, rami daoud <ramidawod34@xxxxxxxxx> wrote: >> "rebooting" >> >> $ find /lib/modules -name agr*.ko >> /lib/modules/2.6.28-11-generic/updates/dkms/agrmodem.ko >> /lib/modules/2.6.28-11-generic/updates/dkms/agrserial.ko >> $ ifconfig >> $ sudo ifconfig ath0 down >> $ sudo ifconfig eth0 down >> $ sudo ifconfig lo down >> $ sudo ifconfig wlan0 down >> $ sudo ifconfig wmaster0 down >> $ sudo agrsm-test >> >> "same result" >> >> " i dont know how to shut down processes. and i am using laptop not >> desktop" >> --- On Sat, 5/9/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >> >> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> Subject: Re: Rami, Syria kernel 2.6.28-11-generic >> To: "rami daoud" <ramidawod34@xxxxxxxxx>, "Linmodems" >> <discuss@xxxxxxxxxxxxx> >> Date: Saturday, May 9, 2009, 6:17 PM >> >> Rami, >> >> Do >> $ find /lib/modules -name agr*.ko >> should display only: >> >> /lib/modules/2.6.28-11-generic/updates/dkms/agrmodem.ko >> /lib/modules/2.6.28-11-generic/updates/dkms/agrserial.ko >> >> If there are others, delete them, reboot and try again. >> >> Otherwise the major problem at this time is: >> Modem Port Scan<*1>: S0 S1 S2 S3 Segmentation fault >> Detach as much external hardware as possible. >> Shut down as many processes as your can, then: >> $ ifconfig >> $ sudo ifconfig eth0 down >> before again trying: >> >> MarvS >> >> >> On Sat, May 9, 2009 at 3:06 PM, rami daoud <ramidawod34@xxxxxxxxx> wrote: >>> emil@emil-laptop:~$ sudo dpkg -i dkms*.deb agrsm*.deb >>> dpkg: requested operation requires superuser privilege >>> ;so i had to double click on each deb file because i couldn't gain the >>> privilege then >>> emil@emil-laptop:~$ sudo agrsm-test >>> A text file created with this information below: >>> >>> Loading drivers: >>> Drivers loaded: >>> agrserial 18848 0 >>> agrmodem 1192868 1 agrserial >>> and symbolic link created: >>> lrwxrwxrwx 1 root root 12 2009-05-09 11:38 /dev/ttySAGR -> /dev/ttyAGS3 >>> Checking for utility wvdialconf >>> Found /usr/bin/wvdialconf, preparing to run: >>> wvdialconf /etc/wvdial.conf >>> A file /etc/wvdial.conf already exists, first renaming to >>> /etc/wvdial.200905093805 >>> Modem Port Scan<*1>: S0 S1 S2 S3 Segmentation fault >>> A reboot may be necessary before modem detection through: >>> sudo modprobe agrserial >>> Which will load agrmodem, agrserial and create the symbolic link needed >>> for: >>> sudo wvdialconf >>> The installation record has been written to ./agrsm-test.txt >>> >>> --- On Sat, 5/9/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>> >>> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >>> Subject: Re: Rami, Syria kernel 2.6.28-11-generic >>> To: "rami daoud" <ramidawod34@xxxxxxxxx> >>> Date: Saturday, May 9, 2009, 1:51 PM >>> >>> Rami, >>> >>> The agrsm-20070804.tar.gz is NOT for your 11c11040 modem >>> >>> Simple run: >>> $sudo dpkg -i dkms*.deb agrsm*.deb >>> >>> Then run the >>> $ sudo agrsm-test >>> >>> MarvS >>> >>> On Sat, May 9, 2009 at 9:16 AM, rami daoud <ramidawod34@xxxxxxxxx> wrote: >>>> I downloaded the following files and installed by using GUI instead of >>>> command line >>>> dkms-agrsm_2.1.80-5_i386. >>>> deb, agrsm-tools_0.0.1_all.deb, >>>> agrsm_howto.txt >>>> >>>> then after reading the later how to document i downloaded and installed >>>> agrsm-20070804.tar.gz >>>> wvdial_1.60.1+nmu2_i386.deb >>>> >>>> then i downloaded and installed wvdial dependencies using GUI too: >>>> libxplc0.3.13_0.3.13-1build1_i386.deb >>>> libwvstreams4.4-base_4.4.1-0.2ubuntu2_i386.deb >>>> libc6_2.9-4ubuntu6_i386.deb >>>> ppp_2.4.5~git20081126t100229-0ubuntu2_i386.deb >>>> libwvstreams4.4-extras_4.4.1-0.2ubuntu2_i386.deb >>>> libuniconf4.4_4.4.1-0.2ubuntu2_i386.deb >>>> debconf_1.5.26ubuntu3_all.deb >>>> >>>> then I started following the howto text instruction but in the terminal >>>> it >>>> is not announcing the creation of /dev/ttyAGS32 after entering: >>>> sudo modprobe agrmodem >>>> sudo modprobe agrserial >>>> >>>> but I proceeded with the rest of instruction and still no modem >>>> detected. >>>> PS i haven't found agrserial after taring agrsm-20070804.tar.gz >>>> I reposted below an update of the modemdata.txt hopefully it gives you >>>> more >>>> clue\ >>>> I hope i was descriptive enough and clear >>>> >>>> >>>> >>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List >>>> Server, >>>> as HTML can contain viruses. Use as the email Subject Line: >>>> With this Subject Line cogent experts will be alerted, and >>>> useful case names left in the Archive. >>>> YourCountry will enable Country specific guidance. Linux experts in >>>> YourCountry >>>> can be found through: http://www.linux.org/groups/index.html. >>>> They will know your Country's modem code, which may be essential for >>>> dialup >>>> service. >>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>>> Internet >>>> Provider mail filters. >>>> So in a day, also check the Archived responses at >>>> http://www.linmodems.org >>>> -------------------------- System information >>>> ---------------------------- >>>> CPU=i686, >>>> Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 >>>> (Ubuntu >>>> 4.3.3-5ubuntu4) ) #37-Ubuntu SMP Mon Mar 23 16:40:23 UTC 2009 >>>> scanModem update of: 2009_04_28 >>>> The modem symbolic link is /dev/modem -> /dev/ttyAGS3 >>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>> Potentially useful modem drivers now loaded are: >>>> snd_hda_intel agrmodem agrserial >>>> Attached USB devices are: >>>> ID 0930:0508 Toshiba Corp. Integrated Bluetooth HCI >>>> If a cellphone is not detected, see >>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>> If a USB modem or cellphone is attached and was not detected, please >>>> provide available information in your request to discuss@xxxxxxxxxxxxx >>>> For candidate card in slot 00:1b.0, firmware information and bootup >>>> diagnostics are: >>>> PCI slot PCI ID SubsystemID Name >>>> ---------- --------- --------- -------------- >>>> 00:1b.0 8086:27d8 1179:ff02 Audio device: Intel Corporation 82801G >>>> Modem interrupt assignment and sharing: >>>> 22: 3058 0 IO-APIC-fasteoi HDA Intel >>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>> [ 1.069476] pci 0000:00:1b.0: reg 10 64bit mmio: >>>> [0xdc440000-0xdc443fff] >>>> [ 1.069476] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>> [ 1.069476] pci 0000:00:1b.0: PME# disabled >>>> [ 1.073223] pci 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ >>>> 22 >>>> [ 10.476780] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>>> a bootup process, but then enabled later. If modem drivers load >>>> but the modem is not responsive, read DOCs/Bootup.txt about possible >>>> fixes. >>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>> if help is needed. >>>> >>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>> The ALSA packages provide audio support and also drivers for some >>>> modems. >>>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>>> The ALSA verion is 1.0.18 >>>> The modem cards detected by "aplay -l" are: None >>>> The /proc/asound/pcm file reports: >>>> ----------------------- >>>> 00-00: ALC861VD Analog : ALC861VD Analog : playback 1 : capture 1 >>>> about /proc/asound/cards: >>>> ------------------------ >>>> 0 [Intel ]: HDA-Intel - HDA Intel >>>> HDA Intel at 0xdc440000 irq 22 >>>> PCI slot 00:1b.0 has a High Definition Audio Card >>>> The drivers are in the kernel modules tree at: >>>> /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>> The modem codec file for the HDA card is: /proc/asound/card0/codec#1 >>>> -------------------------------------------------------- >>>> Codec: LSI ID 1040 >>>> Address: 1 >>>> Vendor Id: 0x11c11040 >>>> Subsystem Id: 0x11790001 >>>> Revision Id: 0x100200 >>>> Modem Function Group: 0x1 >>>> The audio card hosts a softmodem chip: 0x11c11040 >>>> If not a Conexant modem, the driver agrsm with its dependent drivers: >>>> ---------- >>>> provide audio + modem support with the modem chip residing on the >>>> subsystem. >>>> Any particular card can host any one of several soft modem chips. >>>> === Finished firmware and bootup diagnostics, next deducing cogent >>>> software. >>>> === >>>> Predictive diagnostics for card in bus 00:1b.0: >>>> Modem chipset detected on >>>> NAME="Audio device: Intel Corporation 82801G " >>>> CLASS=0403 >>>> PCIDEV=8086:27d8 >>>> SUBSYS=1179:ff02 >>>> IRQ=22 >>>> HDA=8086:27d8 >>>> SOFT=8086:27d8.HDA >>>> CHIP=0x11c11040 >>>> IDENT=agrsm >>>> Driver=agrsm >>>> For candidate modem in: 00:1b.0 >>>> 0403 Audio device: Intel Corporation 82801G >>>> Primary device ID: 8086:27d8 >>>> Subsystem PCI_id 1179:ff02 >>>> Softmodem codec or chipset from diagnostics: 0x11c11040 >>>> from Archives: >>>> The HDA card softmodem chip is 0x11c11040 >>>> >>>> Support type needed or chipset: agrsm >>>> Writing DOCs/Intel.txt >>>> >>>> For 11c1:0260, 11c1:048c and 11c1:048f modem chips, try using the >>>> agrsm-20090418.tar.gz >>>> at http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>>> -------------- end Agere Systems section ------------------- >>>> Completed candidate modem analyses. >>>> The base of the UDEV device file system is: /dev/.udev >>>> Versions adequately match for the compiler installed: 4.3.3 >>>> and the compiler used in kernel assembly: 4.3.3 >>>> The patch utility is needed and is needed for compiling ALSA drivers, >>>> and >>>> possibly others. >>>> >>>> Minimal compiling resources appear complete: >>>> make utility - /usr/bin/make >>>> Compiler version 4.3 >>>> linuc_headers base folder /lib/modules/2.6.28-11-generic/build >>>> However some compilations and executable functions may need additional >>>> files, >>>> in the FileNames.h (so called kernel "h"eaders) collection installed in >>>> /usr/include/ . >>>> For martian_modem, additional required packages are needed. The also >>>> required headers of package libc6 are commonly installed by default. >>>> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev >>>> packages, for kernels 2.6.24 and later versions. >>>> In not included on your install CD, search for them at >>>> http://packages.ubuntu.com >>>> or comparable Repository for other Linux distros. >>>> When compiling ALSA drivers, the utility "patch" will also be needed. >>>> >>>> If a driver compilation fails, with message including some lack of some >>>> FileName.h (stdio.h for example), then >>>> Some additional kernel-header files need installation to /usr/include. >>>> The >>>> minimal additional packages are libc6-dev >>>> and any of its dependents, under Ubuntu linux-libc-dev >>>> If an alternate ethernet connection is available, >>>> $ apt-get update >>>> $ apt-get -s install linux-kernel-devel >>>> will install needed packages. >>>> For Debian/Ubuntu related distributions, run the following command to >>>> display the needed package list: >>>> Otherwise packages have to be found through http://packages.ubuntu.com >>>> Once downloaded and transferred into a Linux partition, >>>> they can be installed alltogether with: >>>> $ sudo dpkg -i *.deb >>>> Checking settings of: /etc/ppp/options >>>> asyncmap 0 >>>> noauth >>>> crtscts >>>> lock >>>> hide-password >>>> modem >>>> proxyarp >>>> lcp-echo-interval 30 >>>> lcp-echo-failure 4 >>>> noipx >>>> In case of a message like: >>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: ath0 eth0 >>>> wifi0 >>>> Which can interfere with Browser naviagation. >>>> Don't worry about the following, it is for experts should trouble >>>> shooting >>>> be necessary. >>>> ========================================================== >>>> Checking for modem support lines: >>>> -------------------------------------- >>>> /device/modem symbolic link: lrwxrwxrwx 1 root root 12 2009-05-08 >>>> 23:54 /dev/modem -> /dev/ttyAGS3 >>>> slmodemd created symbolic link /dev/ttySL0: >>>> Within /etc/udev/ files: >>>> Within /etc/modprobe.conf files: >>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 >>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 >>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order >>>> to >>>> blacklist unwanted modem drivers >>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem >>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem >>>> /etc/modprobe.d/agrsm.conf:## setup agrsm modem with only: "sudo >>>> modprobe >>>> agrserial" >>>> /etc/modprobe.d/agrsm.conf:install agrserial /sbin/modprobe >>>> --ignore-install >>>> agrmodem ; /sbin/modprobe --ignore-install agrserial && \ >>>> /etc/modprobe.d/agrsm.conf:remove agrserial /sbin/modprobe -r >>>> --ignore-remove agrserial ; /sbin/modprobe -r --ignore-remove agrmodem >>>> && >>>> { >>>> if test -L /dev/ttySAGR; then rm /dev/ttySAGR; fi } ; true >>>> /etc/modprobe.d/agrsm.conf:# to automate bootup "sudo modprobe >>>> agrmodem" >>>> /etc/modprobe.d/agrsm.conf:## to setup agrsm modem with only: "sudo >>>> modprobe >>>> agrmodem" >>>> /etc/modprobe.d/agrsm.conf:# install agrmodem /sbin/modprobe >>>> --ignore-install agrmodem && \ >>>> /etc/modprobe.d/agrsm.conf:## of effects of agrmodem and agrserial >>>> loading >>>> Within any ancient /etc/devfs files: >>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>> --------- end modem support lines -------- >>>> >>>> --- On Fri, 5/8/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>> >>>> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >>>> Subject: Re: Toshiba a200-1cr modemdata.txt driver needed >>>> To: ramidawod34@xxxxxxxxx >>>> Cc: discuss@xxxxxxxxxxxxx >>>> Date: Friday, May 8, 2009, 10:06 PM >>>> >>>> Rami >>>> >>>> For AgereSystems/LSI 11c11040 chips hosted on High Definition Audio >>>> cards, your Linux Distro's dkms package should be first installed, >>>> as it directs the modem specific dkms-agrsm resources. >>>> The primary dkms-agrsm resource site is >>>> http://linux.zsolttech.com/linmodem/agrsm/ >>>> whereat a few differnt packaging types are available: .rpm , .deb. >>>> and .tar.gz. >>>> >>>> The dkms-agrsm-CurrentVersion.deb you neeed is copied to >>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , >>>> whereat there are also an agrsm-tools.deb and agrsm_howto.txt packages. >>>> The .deb packages can be manually installed by: >>>> $ $SUDO dpkg -i dkms*.deb agrsm*.deb >>>> which will sequentially process dkms, dkms-agrsm and then the >>>> agrsm-tools testing process. >>>> For an example of what to expect, read >>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html >>>> >>>> MarvS >>>> scanModem maintainer >>>> >>>> >>>> On Fri, May 8, 2009 at 3:33 PM, rami daoud <ramidawod34@xxxxxxxxx> >>>> wrote: >>>>> May you help and tell me where I can download the driver of this >>>>> toshiba >>>>> software modem for toshiba a200-1cr >>>>> >>>>> >>>>> I posted the content of the modemdata.txt as instructed by modemscanner >>>>> : >>>>> >>>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List >>>>> Server, >>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>> YourName, YourCountry kernel 2.6.28-11-generic >>>>> With this Subject Line cogent experts will be alerted, and useful case >>>>> names left in the Archive. >>>>> YourCountry will enable Country specific guidance. Linux experts in >>>>> YourCountry >>>>> can be found through: http://www.linux.org/groups/index.html. >>>>> They will know your Country's modem code, which may be essential for >>>>> dialup service. >>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>>>> Internet >>>>> Provider mail filters. >>>>> So in a day, also check the Archived responses at >>>>> http://www.linmodems.org >>>>> -------------------------- System information >>>>> ---------------------------- >>>>> CPU=i686, >>>>> Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 >>>>> (Ubuntu >>>>> 4.3.3-5ubuntu4) ) #37-Ubuntu SMP Mon Mar 23 16:40:23 UTC 2009 >>>>> scanModem update of: 2009_04_28 >>>>> >>>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>>> Potentially useful modem drivers now loaded are: >>>>> snd_hda_intel >>>>> >>>>> Attached USB devices are: >>>>> ID 0930:0508 Toshiba Corp. Integrated Bluetooth HCI >>>>> If a cellphone is not detected, see >>>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>>> >>>>> If a USB modem or cellphone is attached and was not detected, please >>>>> provide available information in your request to discuss@xxxxxxxxxxxxx >>>>> >>>>> For candidate card in slot 00:1b.0, firmware information and bootup >>>>> diagnostics are: >>>>> PCI slot PCI ID SubsystemID Name >>>>> ---------- --------- --------- -------------- >>>>> 00:1b.0 8086:27d8 1179:ff02 Audio device: Intel >>>>> Corporation 82801G >>>>> >>>>> Modem interrupt assignment and sharing: >>>>> 22: 2791 0 IO-APIC-fasteoi HDA Intel >>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>> [ 0.573349] pci 0000:00:1b.0: reg 10 64bit mmio: >>>>> [0xdc440000-0xdc443fff] >>>>> [ 0.573393] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>>> [ 0.573399] pci 0000:00:1b.0: PME# disabled >>>>> [ 11.443672] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) >>>>> -> >>>>> IRQ 22 >>>>> [ 11.443871] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>> >>>>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>>>> a bootup process, but then enabled later. If modem drivers load >>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible >>>>> fixes. >>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>>> if help is needed. >>>>> >>>>> >>>>> >>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>> The ALSA packages provide audio support and also drivers for some >>>>> modems. >>>>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>>>> >>>>> The ALSA verion is 1.0.18 >>>>> The modem cards detected by "aplay -l" are: None >>>>> >>>>> >>>>> The /proc/asound/pcm file reports: >>>>> ----------------------- >>>>> 00-00: ALC861VD Analog : ALC861VD Analog : playback 1 : capture 1 >>>>> >>>>> about /proc/asound/cards: >>>>> ------------------------ >>>>> 0 [Intel ]: HDA-Intel - HDA Intel >>>>> HDA Intel at 0xdc440000 irq 22 >>>>> >>>>> PCI slot 00:1b.0 has a High Definition Audio Card >>>>> The drivers are in the kernel modules tree at: >>>>> /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko >>>>> The modem codec file for the HDA card is: /proc/asound/card0/codec#1 >>>>> -------------------------------------------------------- >>>>> Codec: LSI ID 1040 >>>>> Address: 1 >>>>> Vendor Id: 0x11c11040 >>>>> Subsystem Id: 0x11790001 >>>>> Revision Id: 0x100200 >>>>> Modem Function Group: 0x1 >>>>> >>>>> The audio card hosts a softmodem chip: 0x11c11040 >>>>> If not a Conexant modem, the driver agrsm with its dependent drivers: >>>>> >>>>> ---------- >>>>> provide audio + modem support with the modem chip residing on the >>>>> subsystem. >>>>> Any particular card can host any one of several soft modem chips. >>>>> >>>>> === Finished firmware and bootup diagnostics, next deducing cogent >>>>> software. === >>>>> >>>>> Predictive diagnostics for card in bus 00:1b.0: >>>>> Modem chipset detected on >>>>> NAME="Audio device: Intel Corporation 82801G " >>>>> CLASS=0403 >>>>> PCIDEV=8086:27d8 >>>>> SUBSYS=1179:ff02 >>>>> IRQ=22 >>>>> HDA=8086:27d8 >>>>> SOFT=8086:27d8.HDA >>>>> CHIP=0x11c11040 >>>>> IDENT=agrsm >>>>> Driver=agrsm >>>>> >>>>> For candidate modem in: 00:1b.0 >>>>> 0403 Audio device: Intel Corporation 82801G >>>>> Primary device ID: 8086:27d8 >>>>> Subsystem PCI_id 1179:ff02 >>>>> Softmodem codec or chipset from diagnostics: 0x11c11040 >>>>> from Archives: >>>>> The HDA card softmodem chip is 0x11c11040 >>>>> >>>>> >>>>> Support type needed or chipset: agrsm >>>>> >>>>> >>>>> Writing DOCs/Intel.txt >>>>> >>>>> For 11c1:0260, 11c1:048c and 11c1:048f modem chips, try using the >>>>> agrsm-20090418.tar.gz >>>>> at http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>>>> >>>>> -------------- end Agere Systems section ------------------- >>>>> >>>>> Completed candidate modem analyses. >>>>> >>>>> The base of the UDEV device file system is: /dev/.udev >>>>> >>>>> Versions adequately match for the compiler installed: 4.3.3 >>>>> and the compiler used in kernel assembly: 4.3.3 >>>>> >>>>> The patch utility is needed and is needed for compiling ALSA drivers, >>>>> and >>>>> possibly others. >>>>> >>>>> >>>>> Minimal compiling resources appear complete: >>>>> make utility - /usr/bin/make >>>>> Compiler version 4.3 >>>>> linuc_headers base folder /lib/modules/2.6.28-11-generic/build >>>>> >>>>> However some compilations and executable functions may need additional >>>>> files, >>>>> in the FileNames.h (so called kernel "h"eaders) collection installed >>>>> in >>>>> /usr/include/ . >>>>> For martian_modem, additional required packages are needed. The also >>>>> required headers of package libc6 are commonly installed by default. >>>>> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev >>>>> packages, for kernels 2.6.24 and later versions. >>>>> In not included on your install CD, search for them at >>>>> http://packages.ubuntu.com >>>>> or comparable Repository for other Linux distros. >>>>> When compiling ALSA drivers, the utility "patch" will also be needed. >>>>> >>>>> >>>>> >>>>> >>>>> If a driver compilation fails, with message including some lack of some >>>>> FileName.h (stdio.h for example), then >>>>> Some additional kernel-header files need installation to /usr/include. >>>>> The >>>>> minimal additional packages are libc6-dev >>>>> and any of its dependents, under Ubuntu linux-libc-dev >>>>> >>>>> If an alternate ethernet connection is available, >>>>> $ apt-get update >>>>> $ apt-get -s install linux-kernel-devel >>>>> will install needed packages. >>>>> For Debian/Ubuntu related distributions, run the following command to >>>>> display the needed package list: >>>>> >>>>> Otherwise packages have to be found through http://packages.ubuntu.com >>>>> Once downloaded and transferred into a Linux partition, >>>>> they can be installed alltogether with: >>>>> $ sudo dpkg -i *.deb >>>>> >>>>> Checking settings of: /etc/ppp/options >>>>> asyncmap 0 >>>>> noauth >>>>> crtscts >>>>> lock >>>>> hide-password >>>>> modem >>>>> proxyarp >>>>> lcp-echo-interval 30 >>>>> lcp-echo-failure 4 >>>>> noipx >>>>> >>>>> In case of a message like: >>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>>> >>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: ath0 >>>>> eth0 >>>>> wifi0 >>>>> Which can interfere with Browser naviagation. >>>>> >>>>> Don't worry about the following, it is for experts should trouble >>>>> shooting be necessary. >>>>> ========================================================== >>>>> >>>>> Checking for modem support lines: >>>>> -------------------------------------- >>>>> /device/modem symbolic link: >>>>> slmodemd created symbolic link /dev/ttySL0: >>>>> Within /etc/udev/ files: >>>>> >>>>> Within /etc/modprobe.conf files: >>>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 >>>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 >>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order >>>>> to >>>>> blacklist unwanted modem drivers >>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem >>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem >>>>> Within any ancient /etc/devfs files: >>>>> >>>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>>> >>>>> --------- end modem support lines -------- >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >
