Martin, I have the same modem on three emachines that I have. I installed Fedora 10 x86_64 and whatever chance they had of working decipated because I chose x86_64. I guess you lose nothing except time if you try compiling the agrsm-20080418.tar.gz. Backup everything that you have that is important and if you feel like giving it a chance go ahead and try. I am going to be honest here, if you have a livecd you should not run into trouble. Something like Slax Live Cd or the PC LinuxOS cd running in Live Mode and trying it out like that. If it works and you can dialout, then install it. The risk would be less. Regards, Antonio On Sat, May 2, 2009 at 5:09 PM, Martin Lupcke <mossianin_lbcmi@xxxxxxxxxx> wrote: > I have been monitoring activity since our last contact. I have been > watching for modems that seem similar to my 11c1:0630. > Marvin recently suggested using the agrsm-20090418.tar.gz file for an > 11c1:0620. Do you have any thoughts/comments on whether this driver might > work for my 0630? > > I do plan on trying this driver when I can, but I thought you may have some > ideas that it may not be worth the effort to try. > Thanks. > > Antonio Olivares wrote: >> >> Martin, >> >> >From the output of dmesg, the problem might be elsewhere? The driver >> might not serve this modem? >> >> agrserial: Loading module Agere Modem Interface driver version >> 2.1.60.0.Linspire (2005-11-16) >> BUG: unable to handle kernel NULL pointer dereference at 00000004 >> IP: [<fc22bd43>] :agrmodem:LXSoftModemStart+0x23/0x230 >> *pde = 00000000 >> Oops: 0000 [#1] SMP >> Modules linked in: agrserial agrmodem(P) ppp_async ppp_generic slhc >> crc_ccitt nvidia(P) fuse af_packet video output sbs sbshc container >> battery ac binfmt_misc loop dm_mirror dm_log dm_mod cpufreq_ondemand >> cpufreq_conservative cpufreq_powersave powernow_k8 freq_table >> amd64_agp agpgart mmc_block sdhci mmc_core 8250_pci ohci1394 ieee1394 >> bttv videodev v4l1_compat firmware_class ir_common compat_ioctl32 >> i2c_algo_bit v4l2_common videobuf_dma_sg videobuf_core btcx_risc >> tveeprom yenta_socket rsrc_nonstatic pcmcia_core rtc_cmos rtc_core >> rtc_lib k8temp hwmon snd_hda_intel snd_hwdep sr_mod cdrom forcedeth >> snd_seq_dummy fan sg snd_seq_oss snd_seq_midi_event snd_seq >> snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc >> snd_mixer_oss snd soundcore wmi thermal button processor i2c_nforce2 >> i2c_core evdev usb_storage pata_amd sata_nv libata sd_mod scsi_mod >> ext3 jbd uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: >> nf_conntrack] >> >> Pid: 4594, comm: wvdialconf Tainted: P (2.6.26.8.tex3 #1) >> EIP: 0060:[<fc22bd43>] EFLAGS: 00210286 CPU: 0 >> EIP is at LXSoftModemStart+0x23/0x230 [agrmodem] >> EAX: 00000008 EBX: f9218a94 ECX: 00000003 EDX: f9218560 >> ESI: 00000000 EDI: f0b9ac78 EBP: eb53bde8 ESP: eb53bd60 >> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 >> Process wvdialconf (pid: 4594, ti=eb53a000 task=f6deabd0 task.ti=eb53a000) >> Stack: eb4d0e40 00000008 fc26680b c16173b8 c16173c0 c01641af 00000001 >> 00000044 >> f0b9d000 c03e9440 00000001 00000000 00000000 000280d0 00200256 >> 00000000 >> 00000001 00000000 00000001 00000000 00000001 c03ea284 c03e9440 >> c03e9440 >> Call Trace: >> [<c01641af>] get_page_from_freelist+0x28f/0x470 >> [<c01645ac>] __alloc_pages_internal+0x9c/0x420 >> [<fc227316>] linux_modem_open+0x26/0x110 [agrmodem] >> [<fc181395>] modemPortOpen+0x5/0x10 [agrmodem] >> [<f9216b35>] serial8250_startup+0x195/0x270 [agrserial] >> [<c027a3a9>] uart_startup+0x49/0x140 >> [<c027be1c>] uart_open+0xcc/0x400 >> [<c0264464>] check_tty_count+0x14/0xb0 >> [<c021139f>] kobject_get+0xf/0x20 >> [<c027bd50>] uart_open+0x0/0x400 >> [<c026840b>] tty_open+0x14b/0x2e0 >> [<c02682c0>] tty_open+0x0/0x2e0 >> [<c0183232>] chrdev_open+0xa2/0x180 >> [<c017e679>] __dentry_open+0xb9/0x240 >> [<c017e847>] nameidata_to_filp+0x47/0x60 >> [<c0183190>] chrdev_open+0x0/0x180 >> [<c018b583>] do_filp_open+0x183/0x790 >> [<c0137fd0>] autoremove_wake_function+0x0/0x50 >> [<f8860b9d>] ext3_discard_reservation+0x6d/0x70 [ext3] >> [<c017e39f>] get_unused_fd_flags+0x4f/0xc0 >> [<c018923a>] getname+0x9a/0xf0 >> [<c017e45c>] do_sys_open+0x4c/0xe0 >> [<c017e56c>] sys_open+0x2c/0x40 >> [<c0103b91>] sysenter_past_esp+0x6a/0x91 >> ======================= >> Code: 00 89 d8 eb a7 8d 76 00 55 b8 0b 68 26 fc 89 e5 57 56 53 83 ec >> 7c 8b 75 08 89 44 24 08 c7 45 e4 78 56 34 12 8d 46 08 89 44 24 04 <8b> >> 46 04 89 04 24 e8 e2 13 00 00 85 c0 89 c3 0f 88 68 01 00 00 >> EIP: [<fc22bd43>] LXSoftModemStart+0x23/0x230 [agrmodem] SS:ESP >> 0068:eb53bd60 >> ---[ end trace 67e696a1185daac9 ]--- >> >> >> This is difficult to diagnoze. Hope that you get it going though, >> Marv has given you great advice after the last message you have sent, >> try to do a >> # wvdialconf /etc/wvdial.conf >> and hopefully the modem gets seen and you can connect with it and not >> get another OOOPS like the one above. >> >> Regards, >> >> Antonio >> >> On Sun, Apr 5, 2009 at 12:13 PM, Martin Lupcke >> <mossianin_lbcmi@xxxxxxxxxx> wrote: >> >>> >>> I was not trying to indicate that I was going to throw in the towel on >>> this. >>> If I did, I apologize. I would definitely like (must) get this modem >>> going >>> as it is the only internet connection available. >>> I did the modprobe commands you suggested both ways. When I executed the >>> link between AGS3 and modem, I get the message: "Creating symbolic link >>> 'dev/modem' to 'dev/ttyAGS3': File exists" (I don't know why I did not >>> notice that before). A list command shows /dev/modem linked to ttyS0. >>> Could that be the problem? Unfortunately, I am not expert enough to >>> know >>> how to change the link on /dev/modem. Please provide the necessary >>> commands. >>> Either way, I tried the noacpi route. The results are the same. >>> >>> Here is the output of dmesg: >>> ---START--- >>> Linux version 2.6.26.8.tex3 (cyril@localhost) (gcc version 4.1.1 20060724 >>> (prerelease) (4.1.1-4pclos2007)) #1 SMP Mon Jan 12 04:33:38 CST 2009 >>> BIOS-provided physical RAM map: >>> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) >>> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) >>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) >>> BIOS-e820: 0000000000100000 - 0000000037ee0000 (usable) >>> BIOS-e820: 0000000037ee0000 - 0000000037ee3000 (ACPI NVS) >>> BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data) >>> BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved) >>> BIOS-e820: 0000000038000000 - 0000000040000000 (reserved) >>> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) >>> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) >>> Malformed early option 'acpi' >>> 0MB HIGHMEM available. >>> 894MB LOWMEM available. >>> found SMP MP-table at [c00f3d80] 000f3d80 >>> Entering add_active_range(0, 0, 229088) 0 entries of 256 used >>> Zone PFN ranges: >>> DMA 0 -> 4096 >>> Normal 4096 -> 229088 >>> HighMem 229088 -> 229088 >>> Movable zone start PFN for each node >>> early_node_map[1] active PFN ranges >>> 0: 0 -> 229088 >>> On node 0 totalpages: 229088 >>> DMA zone: 32 pages used for memmap >>> DMA zone: 0 pages reserved >>> DMA zone: 4064 pages, LIFO batch:0 >>> Normal zone: 1758 pages used for memmap >>> Normal zone: 223234 pages, LIFO batch:31 >>> HighMem zone: 0 pages used for memmap >>> Movable zone: 0 pages used for memmap >>> DMI 2.5 present. >>> ACPI: RSDP 000F81B0, 0014 (r0 ACRSYS) >>> ACPI: RSDT 37EE3000, 003C (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0) >>> ACPI: FACP 37EE3080, 0074 (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0) >>> ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero >>> address or length: 0000000000000000/1 [20080321] >>> ACPI: DSDT 37EE3100, 6E1B (r1 ACRSYS ACRPRDCT 1000 MSFT 3000000) >>> ACPI: FACS 37EE0000, 0040 >>> ACPI: SSDT 37EEA000, 00D3 (r1 PTLTD POWERNOW 1 LTP 1) >>> ACPI: HPET 37EEA100, 0038 (r1 ACRSYS ACRPRDCT 42302E31 NVDA 98) >>> ACPI: SLIC 37EEA140, 0176 (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0) >>> ACPI: MCFG 37EEA2C0, 003C (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0) >>> ACPI: APIC 37EE9F40, 0098 (r1 ACRSYS ACRPRDCT 42302E31 NVDA 0) >>> Detected use of extended apic ids on hypertransport bus >>> ACPI: PM-Timer IO Port: 0x1008 >>> ACPI: Local APIC address 0xfee00000 >>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) >>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) >>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) >>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >>> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >>> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) >>> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) >>> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) >>> IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) >>> ACPI: IRQ0 used by override. >>> ACPI: IRQ2 used by override. >>> ACPI: IRQ9 used by override. >>> ACPI: IRQ14 used by override. >>> ACPI: IRQ15 used by override. >>> Enabling APIC mode: Flat. Using 1 I/O APICs >>> ACPI: HPET id: 0x10de8201 base: 0xfeff0000 >>> Using ACPI (MADT) for SMP configuration information >>> Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) >>> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 >>> PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 >>> PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 >>> SMP: Allowing 4 CPUs, 3 hotplug CPUs >>> PERCPU: Allocating 36552 bytes of per cpu data >>> NR_CPUS: 8, nr_cpu_ids: 4 >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >>> 227298 >>> Kernel command line: BOOT_IMAGE=linux >>> root=UUID=1e04c8a3-917e-4eb6-b799-231bbca729b2 acpi=on >>> resume=UUID=2eb778c2-1749-4ca1-9a98-f256fb7db67d splash=silent vga=788 >>> bootsplash: silent mode. >>> mapped APIC to ffffb000 (fee00000) >>> mapped IOAPIC to ffffa000 (fec00000) >>> Enabling fast FPU save and restore... done. >>> Enabling unmasked SIMD FPU exception support... done. >>> Initializing CPU#0 >>> PID hash table entries: 4096 (order: 12, 16384 bytes) >>> Detected 1607.386 MHz processor. >>> spurious 8259A interrupt: IRQ7. >>> Console: colour dummy device 80x25 >>> console [tty0] enabled >>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>> Memory: 901448k/916352k available (2305k kernel code, 14340k reserved, >>> 805k >>> data, 284k init, 0k highmem) >>> virtual kernel memory layout: >>> fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) >>> pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >>> lowmem : 0xc0000000 - 0xf7ee0000 ( 894 MB) >>> .init : 0xc0411000 - 0xc0458000 ( 284 kB) >>> .data : 0xc0340749 - 0xc0409d00 ( 805 kB) >>> .text : 0xc0100000 - 0xc0340749 (2305 kB) >>> Checking if this processor honours the WP bit even in supervisor >>> mode...Ok. >>> CPA: page pool initialized 1 of 1 pages preallocated >>> hpet clockevent registered >>> Calibrating delay using timer specific routine.. 3218.10 BogoMIPS >>> (lpj=6436207) >>> Security Framework initialized >>> SELinux: Disabled at boot. >>> Capability LSM initialized >>> Mount-cache hash table entries: 512 >>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >>> CPU: L2 Cache: 512K (64 bytes/line) >>> Intel machine check architecture supported. >>> Intel machine check reporting enabled on CPU#0. >>> Checking 'hlt' instruction... OK. >>> SMP alternatives: switching to UP code >>> Early unpacking initramfs... done >>> Freeing initrd memory: 2458k freed >>> ACPI: Core revision 20080321 >>> ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. >>> ENABLING IO-APIC IRQs >>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >>> CPU0: AMD Athlon(tm) Processor 2650e stepping 02 >>> Brought up 1 CPUs >>> Total of 1 processors activated (3218.10 BogoMIPS). >>> net_namespace: 660 bytes >>> NET: Registered protocol family 16 >>> No dock devices found. >>> ACPI: bus type pci registered >>> PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 >>> PCI: MCFG area at f0000000 reserved in E820 >>> PCI: Using MMCONFIG for extended config space >>> PCI: Using configuration type 1 for base access >>> Setting up standard PCI resources >>> ACPI: EC: Look up EC in DSDT >>> ACPI: Interpreter enabled >>> ACPI: (supports S0 S3 S4 S5) >>> ACPI: Using IOAPIC for interrupt routing >>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>> PCI: Transparent bridge - 0000:00:04.0 >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] >>> ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) >>> ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) >>> ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15) >>> ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) >>> ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15) >>> ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) >>> ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) >>> ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) >>> ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) >>> ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. >>> ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. >>> ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. >>> ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. >>> ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. >>> ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 >>> ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. >>> ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. >>> ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0 >>> ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 >>> ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 >>> ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled. >>> ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0 >>> ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0 >>> ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 >>> ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. >>> ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. >>> ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0 >>> ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0 >>> Linux Plug and Play Support v0.97 (c) Adam Belay >>> pnp: PnP ACPI init >>> ACPI: bus type pnp registered >>> pnp: PnP ACPI: found 12 devices >>> ACPI: ACPI bus type pnp unregistered >>> PnPBIOS: Disabled by ACPI PNP >>> PCI: Using ACPI for IRQ routing >>> hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 >>> hpet0: 3 32-bit timers, 25000000 Hz >>> ACPI: RTC can wake from S4 >>> system 00:01: ioport range 0x1000-0x107f has been reserved >>> system 00:01: ioport range 0x1080-0x10ff has been reserved >>> system 00:01: ioport range 0x1400-0x147f has been reserved >>> system 00:01: ioport range 0x1480-0x14ff has been reserved >>> system 00:01: ioport range 0x1800-0x187f has been reserved >>> system 00:01: ioport range 0x1880-0x18ff has been reserved >>> system 00:01: ioport range 0x2000-0x207f has been reserved >>> system 00:01: ioport range 0x2080-0x20ff has been reserved >>> system 00:02: ioport range 0x4d0-0x4d1 has been reserved >>> system 00:02: ioport range 0x295-0x314 has been reserved >>> system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved >>> system 00:0b: iomem range 0xf0000-0xfffff could not be reserved >>> system 00:0b: iomem range 0xfeff0000-0xfeff00ff could not be reserved >>> system 00:0b: iomem range 0x37ee0000-0x37efffff could not be reserved >>> system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved >>> system 00:0b: iomem range 0x0-0x9ffff could not be reserved >>> system 00:0b: iomem range 0x100000-0x37edffff could not be reserved >>> system 00:0b: iomem range 0x38000000-0x3fffffff could not be reserved >>> system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved >>> system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved >>> system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved >>> system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved >>> system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved >>> system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved >>> Switched to high resolution mode on CPU 0 >>> PCI: Bridge: 0000:00:04.0 >>> IO window: b000-bfff >>> MEM window: 0xfd800000-0xfd8fffff >>> PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff >>> PCI: Bridge: 0000:00:09.0 >>> IO window: a000-afff >>> MEM window: 0xfde00000-0xfdefffff >>> PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff >>> PCI: Bridge: 0000:00:0b.0 >>> IO window: 9000-9fff >>> MEM window: 0xfdc00000-0xfdcfffff >>> PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff >>> PCI: Bridge: 0000:00:0c.0 >>> IO window: 8000-8fff >>> MEM window: 0xfda00000-0xfdafffff >>> PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff >>> PCI: Setting latency timer of device 0000:00:04.0 to 64 >>> PCI: Setting latency timer of device 0000:00:09.0 to 64 >>> PCI: Setting latency timer of device 0000:00:0b.0 to 64 >>> PCI: Setting latency timer of device 0000:00:0c.0 to 64 >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>> TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >>> TCP: Hash tables configured (established 131072 bind 65536) >>> TCP reno registered >>> NET: Registered protocol family 1 >>> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) >>> apm: overridden by ACPI. >>> audit: initializing netlink socket (disabled) >>> type=2000 audit(1238935676.392:1): initialized >>> VFS: Disk quotas dquot_6.5.1 >>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>> msgmni has been set to 1765 >>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >>> io scheduler noop registered >>> io scheduler anticipatory registered >>> io scheduler deadline registered >>> io scheduler cfq registered (default) >>> pci 0000:00:0d.0: Boot video device >>> PCI: Setting latency timer of device 0000:00:09.0 to 64 >>> assign_interrupt_mode Found MSI capability >>> Allocate Port Service[0000:00:09.0:pcie00] >>> Allocate Port Service[0000:00:09.0:pcie03] >>> PCI: Setting latency timer of device 0000:00:0b.0 to 64 >>> assign_interrupt_mode Found MSI capability >>> Allocate Port Service[0000:00:0b.0:pcie00] >>> Allocate Port Service[0000:00:0b.0:pcie03] >>> PCI: Setting latency timer of device 0000:00:0c.0 to 64 >>> assign_interrupt_mode Found MSI capability >>> Allocate Port Service[0000:00:0c.0:pcie00] >>> Allocate Port Service[0000:00:0c.0:pcie03] >>> vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3750k, >>> total >>> 131072k >>> vesafb: mode is 800x600x16, linelength=1600, pages=2 >>> vesafb: protected mode interface info at c000:d560 >>> vesafb: pmi: set display start = c00cd596, set palette = c00cd600 >>> vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 >>> c903 >>> cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 >>> vesafb: scrolling: redraw >>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >>> bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size >>> 29454 >>> bytes,<6>...found (800x600, 29406 bytes, v3). >>> Console: switching to colour frame buffer device 93x31 >>> fb0: VESA VGA frame buffer device >>> isapnp: Scanning for PnP cards... >>> isapnp: No Plug & Play device found >>> hpet_resources: 0xfeff0000 is busy >>> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled >>> brd: module loaded >>> Uniform Multi-Platform E-IDE driver >>> ide: Assuming 33MHz system bus speed for PIO modes; override with >>> idebus=xx >>> NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller >>> NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot >>> 0000:00:06.0 >>> NFORCE-MCP61: not 100% native mode: will probe irqs later >>> NFORCE-MCP61: IDE port disabled >>> ide0: BM-DMA at 0xf000-0xf007 >>> Probing IDE interface ide0... >>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >>> ide-floppy driver 1.00 >>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>> serio: i8042 AUX port at 0x60,0x64 irq 12 >>> mice: PS/2 mouse device common for all mice >>> cpuidle: using governor ladder >>> cpuidle: using governor menu >>> Using IPI No-Shortcut mode >>> registered taskstats version 1 >>> Freeing unused kernel memory: 284k freed >>> input: AT Translated Set 2 keyboard as /class/input/input0 >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 >>> ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) >>> -> >>> IRQ 22 >>> PCI: Setting latency timer of device 0000:00:02.1 to 64 >>> ehci_hcd 0000:00:02.1: EHCI Host Controller >>> ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 >>> ehci_hcd 0000:00:02.1: debug port 1 >>> PCI: cache line size of 64 is not supported by device 0000:00:02.1 >>> ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 >>> ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >>> usb usb1: configuration #1 chosen from 1 choice >>> hub 1-0:1.0: USB hub found >>> hub 1-0:1.0: 10 ports detected >>> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver >>> ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 >>> ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) >>> -> >>> IRQ 21 >>> PCI: Setting latency timer of device 0000:00:02.0 to 64 >>> ohci_hcd 0000:00:02.0: OHCI Host Controller >>> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 >>> ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 >>> usb usb2: configuration #1 chosen from 1 choice >>> hub 2-0:1.0: USB hub found >>> hub 2-0:1.0: 10 ports detected >>> USB Universal Host Controller Interface driver v3.0 >>> SCSI subsystem initialized >>> Driver 'sd' needs updating - please use bus_type methods >>> usb 1-8: new high speed USB device using ehci_hcd and address 2 >>> input: ImPS/2 Generic Wheel Mouse as /class/input/input1 >>> libata version 3.00 loaded. >>> usb 1-8: configuration #1 chosen from 1 choice >>> sata_nv 0000:00:08.0: version 3.5 >>> ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 >>> ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 23 (level, low) >>> -> >>> IRQ 23 >>> PCI: Setting latency timer of device 0000:00:08.0 to 64 >>> scsi0 : sata_nv >>> scsi1 : sata_nv >>> ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 >>> ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 >>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>> ata2.00: ATA-8: Hitachi HDP725016GLA380, GMBOA52A, max UDMA/133 >>> ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) >>> ata2.00: configured for UDMA/133 >>> scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72501 GMBO PQ: 0 >>> ANSI: 5 >>> sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) >>> sd 1:0:0:0: [sda] Write Protect is off >>> sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't >>> support >>> DPO or FUA >>> sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) >>> sd 1:0:0:0: [sda] Write Protect is off >>> sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't >>> support >>> DPO or FUA >>> sda: sda1 sda2 < sda5 sda6 > >>> sd 1:0:0:0: [sda] Attached SCSI disk >>> ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 >>> ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [APSJ] -> GSI 23 (level, low) >>> -> >>> IRQ 23 >>> PCI: Setting latency timer of device 0000:00:08.1 to 64 >>> scsi2 : sata_nv >>> scsi3 : sata_nv >>> ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23 >>> ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23 >>> ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> ata3.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100 >>> ata3.00: configured for UDMA/100 >>> scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH15F EG00 PQ: 0 >>> ANSI: 5 >>> Initializing USB Mass Storage driver... >>> scsi4 : SCSI emulation for USB Mass Storage devices >>> usbcore: registered new interface driver usb-storage >>> USB Mass Storage support registered. >>> usb-storage: device found at 2 >>> usb-storage: waiting for device to settle before scanning >>> scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 >>> ANSI: 0 >>> CCS >>> sd 4:0:0:0: [sdb] Attached SCSI removable disk >>> scsi 4:0:0:1: Direct-Access Generic- SM/xD/SD/MMC/MS 1.00 PQ: 0 >>> ANSI: 0 >>> CCS >>> sd 4:0:0:1: [sdc] Attached SCSI removable disk >>> usb-storage: device scan complete >>> kjournald starting. Commit interval 5 seconds >>> EXT3-fs: mounted filesystem with ordered data mode. >>> i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 >>> i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 >>> ACPI: ACPI0007:00 is registered as cooling_device0 >>> input: Power Button (FF) as /class/input/input2 >>> ACPI: Power Button (FF) [PWRF] >>> input: Power Button (CM) as /class/input/input3 >>> ACPI: Power Button (CM) [PWRB] >>> ACPI: Expecting a [Reference] package element, found type 0 >>> ACPI: LNXTHERM:01 is registered as thermal_zone0 >>> ACPI: Thermal Zone [THRM] (34 C) >>> ACPI: WMI: Mapper loaded >>> sd 1:0:0:0: Attached scsi generic sg0 type 0 >>> scsi 2:0:0:0: Attached scsi generic sg1 type 5 >>> sd 4:0:0:0: Attached scsi generic sg2 type 0 >>> sd 4:0:0:1: Attached scsi generic sg3 type 0 >>> ACPI: PNP0C0B:00 is registered as cooling_device1 >>> ACPI: Fan [FAN] (on) >>> forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. >>> ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 >>> ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 20 (level, low) >>> -> >>> IRQ 20 >>> PCI: Setting latency timer of device 0000:00:07.0 to 64 >>> Driver 'sr' needs updating - please use bus_type methods >>> sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray >>> Uniform CD-ROM driver Revision: 3.20 >>> sr 2:0:0:0: Attached scsi CD-ROM sr0 >>> forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x5043 @ 1, addr >>> 00:1d:72:b2:d2:d4 >>> forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi >>> desc-v3 >>> ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 >>> ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) >>> -> >>> IRQ 22 >>> PCI: Setting latency timer of device 0000:00:05.0 to 64 >>> rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 >>> rtc0: alarms up to one year, y3k >>> Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 13 >>> (usb?) >>> floppy0: no floppy controllers found >>> Linux video capture interface: v2.00 >>> bttv: driver version 0.9.17 loaded >>> bttv: using 8 buffers with 2080k (520 pages) each for capture >>> sdhci: Secure Digital Host Controller Interface driver >>> sdhci: Copyright(c) Pierre Ossman >>> Linux agpgart interface v0.103 >>> powernow-k8: Found 1 AMD Athlon(tm) Processor 2650e processors (1 cpu >>> cores) >>> (version 2.20.00) >>> powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x16 >>> powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 >>> Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 13 >>> (usb?) >>> floppy0: no floppy controllers found >>> device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: >>> dm-devel@xxxxxxxxxx >>> EXT3 FS on sda1, internal journal >>> loop: module loaded >>> Adding 4088500k swap on /dev/sda5. Priority:-1 extents:1 across:4088500k >>> bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size >>> 29454 >>> bytes,<6>...found (800x600, 29406 bytes, v3). >>> bootsplash: status on console 0 changed to on >>> nf_conntrack version 0.5.0 (14336 buckets, 57344 max) >>> NET: Registered protocol family 17 >>> eth0: no link during initialization. >>> fuse init (API version 7.9) >>> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, >>> 3179 bytes, v3). >>> bootsplash: status on console 0 changed to on >>> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, >>> 3179 bytes, v3). >>> bootsplash: status on console 1 changed to on >>> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, >>> 3179 bytes, v3). >>> bootsplash: status on console 2 changed to on >>> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, >>> 3179 bytes, v3). >>> bootsplash: status on console 3 changed to on >>> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, >>> 3179 bytes, v3). >>> bootsplash: status on console 4 changed to on >>> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, >>> 3179 bytes, v3). >>> bootsplash: status on console 5 changed to on >>> nvidia: module license 'NVIDIA' taints kernel. >>> ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21 >>> ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [AIGP] -> GSI 21 (level, low) >>> -> >>> IRQ 21 >>> PCI: Setting latency timer of device 0000:00:0d.0 to 64 >>> NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 >>> PST >>> 2009 >>> PPP generic driver version 2.4.2 >>> agrsm: created 0 infos >>> Loading module Agere Modem Controller driver version 2.1.60.0.Linspire >>> (2005-11-16) >>> ttyAGS3 at I/O 0x400 (irq = 3) is a AgereModem >>> agrserial: Loading module Agere Modem Interface driver version >>> 2.1.60.0.Linspire (2005-11-16) >>> BUG: unable to handle kernel NULL pointer dereference at 00000004 >>> IP: [<fc22bd43>] :agrmodem:LXSoftModemStart+0x23/0x230 >>> *pde = 00000000 >>> Oops: 0000 [#1] SMP >>> Modules linked in: agrserial agrmodem(P) ppp_async ppp_generic slhc >>> crc_ccitt nvidia(P) fuse af_packet video output sbs sbshc container >>> battery >>> ac binfmt_misc loop dm_mirror dm_log dm_mod cpufreq_ondemand >>> cpufreq_conservative cpufreq_powersave powernow_k8 freq_table amd64_agp >>> agpgart mmc_block sdhci mmc_core 8250_pci ohci1394 ieee1394 bttv videodev >>> v4l1_compat firmware_class ir_common compat_ioctl32 i2c_algo_bit >>> v4l2_common >>> videobuf_dma_sg videobuf_core btcx_risc tveeprom yenta_socket >>> rsrc_nonstatic >>> pcmcia_core rtc_cmos rtc_core rtc_lib k8temp hwmon snd_hda_intel >>> snd_hwdep >>> sr_mod cdrom forcedeth snd_seq_dummy fan sg snd_seq_oss >>> snd_seq_midi_event >>> snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc >>> snd_mixer_oss snd soundcore wmi thermal button processor i2c_nforce2 >>> i2c_core evdev usb_storage pata_amd sata_nv libata sd_mod scsi_mod ext3 >>> jbd >>> uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: nf_conntrack] >>> >>> Pid: 4594, comm: wvdialconf Tainted: P (2.6.26.8.tex3 #1) >>> EIP: 0060:[<fc22bd43>] EFLAGS: 00210286 CPU: 0 >>> EIP is at LXSoftModemStart+0x23/0x230 [agrmodem] >>> EAX: 00000008 EBX: f9218a94 ECX: 00000003 EDX: f9218560 >>> ESI: 00000000 EDI: f0b9ac78 EBP: eb53bde8 ESP: eb53bd60 >>> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 >>> Process wvdialconf (pid: 4594, ti=eb53a000 task=f6deabd0 >>> task.ti=eb53a000) >>> Stack: eb4d0e40 00000008 fc26680b c16173b8 c16173c0 c01641af 00000001 >>> 00000044 >>> f0b9d000 c03e9440 00000001 00000000 00000000 000280d0 00200256 >>> 00000000 >>> 00000001 00000000 00000001 00000000 00000001 c03ea284 c03e9440 >>> c03e9440 >>> Call Trace: >>> [<c01641af>] get_page_from_freelist+0x28f/0x470 >>> [<c01645ac>] __alloc_pages_internal+0x9c/0x420 >>> [<fc227316>] linux_modem_open+0x26/0x110 [agrmodem] >>> [<fc181395>] modemPortOpen+0x5/0x10 [agrmodem] >>> [<f9216b35>] serial8250_startup+0x195/0x270 [agrserial] >>> [<c027a3a9>] uart_startup+0x49/0x140 >>> [<c027be1c>] uart_open+0xcc/0x400 >>> [<c0264464>] check_tty_count+0x14/0xb0 >>> [<c021139f>] kobject_get+0xf/0x20 >>> [<c027bd50>] uart_open+0x0/0x400 >>> [<c026840b>] tty_open+0x14b/0x2e0 >>> [<c02682c0>] tty_open+0x0/0x2e0 >>> [<c0183232>] chrdev_open+0xa2/0x180 >>> [<c017e679>] __dentry_open+0xb9/0x240 >>> [<c017e847>] nameidata_to_filp+0x47/0x60 >>> [<c0183190>] chrdev_open+0x0/0x180 >>> [<c018b583>] do_filp_open+0x183/0x790 >>> [<c0137fd0>] autoremove_wake_function+0x0/0x50 >>> [<f8860b9d>] ext3_discard_reservation+0x6d/0x70 [ext3] >>> [<c017e39f>] get_unused_fd_flags+0x4f/0xc0 >>> [<c018923a>] getname+0x9a/0xf0 >>> [<c017e45c>] do_sys_open+0x4c/0xe0 >>> [<c017e56c>] sys_open+0x2c/0x40 >>> [<c0103b91>] sysenter_past_esp+0x6a/0x91 >>> ======================= >>> Code: 00 89 d8 eb a7 8d 76 00 55 b8 0b 68 26 fc 89 e5 57 56 53 83 ec 7c >>> 8b >>> 75 08 89 44 24 08 c7 45 e4 78 56 34 12 8d 46 08 89 44 24 04 <8b> 46 04 89 >>> 04 >>> 24 e8 e2 13 00 00 85 c0 89 c3 0f 88 68 01 00 00 >>> EIP: [<fc22bd43>] LXSoftModemStart+0x23/0x230 [agrmodem] SS:ESP >>> 0068:eb53bd60 >>> ---[ end trace 67e696a1185daac9 ]--- >>> >>> ===END OF dmeg OUTPUT=== >>> >>> >>> Here is the output of lsmod: >>> ===START=== >>> Module Size Used by >>> agrserial 11088 2 >>> agrmodem 1184932 1 agrserial >>> ppp_async 8544 0 >>> ppp_generic 22780 1 ppp_async >>> slhc 6112 1 ppp_generic >>> crc_ccitt 2144 1 ppp_async >>> nvidia 7217048 26 >>> fuse 48956 1 >>> af_packet 16192 0 >>> video 16560 0 >>> output 3104 1 video >>> sbs 11208 0 >>> sbshc 5280 1 sbs >>> container 3488 0 >>> battery 10308 0 >>> ac 4292 0 >>> binfmt_misc 8488 1 >>> loop 14188 0 >>> dm_mirror 17216 0 >>> dm_log 9604 1 dm_mirror >>> dm_mod 49668 2 dm_mirror,dm_log >>> cpufreq_ondemand 7020 0 >>> cpufreq_conservative 6472 0 >>> cpufreq_powersave 1952 0 >>> powernow_k8 13188 0 >>> freq_table 4576 2 cpufreq_ondemand,powernow_k8 >>> amd64_agp 9540 0 >>> agpgart 31560 2 nvidia,amd64_agp >>> mmc_block 9796 0 >>> sdhci 14788 0 >>> mmc_core 43420 2 mmc_block,sdhci >>> 8250_pci 23776 0 >>> ohci1394 29360 0 >>> ieee1394 84728 1 ohci1394 >>> bttv 160404 0 >>> videodev 30240 1 bttv >>> v4l1_compat 14404 1 videodev >>> firmware_class 7296 1 bttv >>> ir_common 40196 1 bttv >>> compat_ioctl32 1344 1 bttv >>> i2c_algo_bit 6020 1 bttv >>> v4l2_common 11392 1 bttv >>> videobuf_dma_sg 11812 1 bttv >>> videobuf_core 17284 2 bttv,videobuf_dma_sg >>> btcx_risc 4648 1 bttv >>> tveeprom 12260 1 bttv >>> yenta_socket 22956 0 >>> rsrc_nonstatic 11616 1 yenta_socket >>> pcmcia_core 35764 2 yenta_socket,rsrc_nonstatic >>> rtc_cmos 9376 0 >>> rtc_core 14620 1 rtc_cmos >>> rtc_lib 3104 1 rtc_core >>> k8temp 4288 0 >>> hwmon 2716 1 k8temp >>> snd_hda_intel 360684 1 >>> snd_hwdep 6980 1 snd_hda_intel >>> sr_mod 15236 0 >>> cdrom 34560 1 sr_mod >>> forcedeth 49840 0 >>> snd_seq_dummy 2852 0 >>> fan 4260 0 >>> sg 30260 0 >>> snd_seq_oss 29024 0 >>> snd_seq_midi_event 7104 1 snd_seq_oss >>> snd_seq 48240 5 >>> snd_seq_dummy,snd_seq_oss,snd_seq_midi_event >>> snd_seq_device 7212 3 snd_seq_dummy,snd_seq_oss,snd_seq >>> snd_pcm_oss 36800 0 >>> snd_pcm 70660 2 snd_hda_intel,snd_pcm_oss >>> snd_timer 20168 2 snd_seq,snd_pcm >>> snd_page_alloc 8456 2 snd_hda_intel,snd_pcm >>> snd_mixer_oss 14048 1 snd_pcm_oss >>> snd 51812 11 >>> >>> snd_hda_intel,snd_hwdep,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss >>> soundcore 7072 1 snd >>> wmi 6568 0 >>> thermal 15260 0 >>> button 6224 0 >>> processor 32544 2 powernow_k8,thermal >>> i2c_nforce2 6208 0 >>> i2c_core 22196 6 >>> nvidia,bttv,i2c_algo_bit,v4l2_common,tveeprom,i2c_nforce2 >>> evdev 9056 3 >>> usb_storage 83968 0 >>> pata_amd 10532 0 >>> sata_nv 21864 2 >>> libata 159040 2 pata_amd,sata_nv >>> sd_mod 25752 3 >>> scsi_mod 141228 5 sr_mod,sg,usb_storage,libata,sd_mod >>> ext3 120552 1 >>> jbd 41940 1 ext3 >>> uhci_hcd 21260 0 >>> ohci_hcd 20996 0 >>> ehci_hcd 32492 0 >>> usbcore 129328 5 usb_storage,uhci_hcd,ohci_hcd,ehci_hcd >>> ===END OF lsmod OUTPUT=== >>> >>> >>> Antonio Olivares wrote: >>> >>>> >>>> Martin, >>>> >>>> working with these types of modems can be a pain, but before you give >>>> up, throw the towel please do the following. >>>> >>>> when you do a >>>> # modprobe agrserial >>>> # modprobe agrmodem >>>> or the other way around? >>>> # modprobe agrmodem >>>> # modprobe agrserial >>>> >>>> then you may run the agrsm-test:(oops that is for 11c11040 :( >>>> driver(s)). Anyhow you may make symbolic links >>>> >>>> # ln -s /dev/ttyAGS3 /dev/ttySAGR >>>> # ln -s /dev/ttyAGS3 /dev/modem >>>> >>>> if a failure by wvdialconf to find the modem port occurs again, edit >>>> the grub.conf file and add the option "pci=noacpi" >>>> >>>> Also if none of the above advice worked, please attach what you did, >>>> copy and paste to this message also please add the output of dmesg >>>> and/or lsmod so that we can see if the modules were loaded or not. >>>> >>>> Regards, >>>> >>>> Antonio >>>> >>>> >>>> >>>> http://linmodems.technion.ac.il/packages/ltmodem/sv92/agrsm_howto.txt >>>> >>>> >>>> >>>> On Sun, Apr 5, 2009 at 9:37 AM, Martin Lupcke >>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>> >>>> >>>>> >>>>> I followed the instructions in the "agrsm_howto.txt" file. It appears >>>>> that >>>>> it did not work. >>>>> The first indication was that the "modprobe agrserial" command did not >>>>> return the creation of ttyAGS3. It simply came back to the prompt. >>>>> The >>>>> wvdialconf command came back simply saying that no modem was found. I >>>>> did >>>>> try the two remedied described, but no luck. >>>>> I even went so far as to re-install Linux from scratch in case some of >>>>> my >>>>> earlier attempts messed something up. The results are the same as I >>>>> describe above. >>>>> Let me know if there is something else I should try. Please be fairly >>>>> detailed as I am a relative newbie to Linux (about a year old). >>>>> >>>>> Thanks. >>>>> >>>>> >>>>> Marvin Stodolsky wrote: >>>>> >>>>> >>>>>> >>>>>> Martin, >>>>>> >>>>>> Try the attached. Report back to the List, not me directly: >>>>>> >>>>>> Jacques, >>>>>> Please put into the >>>>>> http://linmodems.technion.ac.il/packages/ltmodem/sv92/ folder. It >>>>>> just differs by recognition of PCI_ID 11c1:0630 >>>>>> >>>>>> MarvS >>>>>> >>>>>> On Fri, Apr 3, 2009 at 11:53 PM, Marvin Stodolsky >>>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> Antomio reported Microsoft diagnostics: >>>>>>> Modem type: Agere Systems PCI-SV92EX Soft Modem >>>>>>> pci\ven_11c1&dev_0630&subsys_063011c1 >>>>>>> which lines translates in Linux format: >>>>>>> PCI_ID 11c1:0630 >>>>>>> which shows that it is in the Agere Systems PCI-SV92 family, >>>>>>> i.e., a type which might be supported by the current agrsm code. >>>>>>> >>>>>>> More tomorrow. >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> On Fri, Apr 3, 2009 at 7:52 PM, Marvin Stodolsky >>>>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Martin, >>>>>>>> >>>>>>>> Communication controller: Agere Systems Device 0630 " >>>>>>>> CLASS=0780 , PCIDEV=11c1:0630 >>>>>>>> is a modem we haven't encountered before under Linux. >>>>>>>> There is service for a 11c1:0630 chipset modem through a agrsm >>>>>>>> package, for compiling an agrmodem+agrserial driver pair. >>>>>>>> >>>>>>>> I'll add 11c1:0630 to the agrsm recognition codes and sent it to >>>>>>>> you, >>>>>>>> tonight or tomorrow. >>>>>>>> >>>>>>>> MarvS >>>>>>>> >>>>>>>> On Fri, Apr 3, 2009 at 6:32 PM, Martin Lupcke >>>>>>>> <mossianin_lbcmi@xxxxxxxxxx> wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> I recently purchased an EMachines model EL1200. It has a modem in >>>>>>>>> it >>>>>>>>> that I >>>>>>>>> am trying to get running because it is the only means of connecting >>>>>>>>> to >>>>>>>>> the >>>>>>>>> internet. The modem itself has an LSI label on the front with and >>>>>>>>> Anatel >>>>>>>>> label on the back. There does not appear to any other obvious >>>>>>>>> labelling. >>>>>>>>> I have tried several things including using the Windows drivers >>>>>>>>> from >>>>>>>>> the >>>>>>>>> EMachines website with ndiswrapper (I did not have the presence of >>>>>>>>> mind to >>>>>>>>> try to get the Windows information before I wiped the drive.) I >>>>>>>>> have >>>>>>>>> searched the archives for the PCIID that appears for this modem. I >>>>>>>>> did >>>>>>>>> find >>>>>>>>> a similar ID (11c10480, I believe) but that did not work. All to >>>>>>>>> no >>>>>>>>> avail. >>>>>>>>> Below is the output from scanModem's ModemData.txt file. Any >>>>>>>>> assistance you >>>>>>>>> can offer to get this modem working would be appreciated. >>>>>>>>> >>>>>>>>> Thanks. >>>>>>>>> >>>>>>>>> ===Begin ModemData.txt=== >>>>>>>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx >>>>>>>>> List >>>>>>>>> Server, >>>>>>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>>>>>> YourName, YourCountry PCLinuxOS release 2009 (PCLinuxOS) for >>>>>>>>> i586 >>>>>>>>> Kernel 2.6.26.8.tex3 on an i686 / kernel 2.6.26.8.tex3 >>>>>>>>> With this Subject Line cogent experts will be alerted, and useful >>>>>>>>> case >>>>>>>>> names >>>>>>>>> left in the Archive. >>>>>>>>> YourCountry will enable Country specific guidance. Linux experts in >>>>>>>>> YourCountry >>>>>>>>> can be found through: http://www.linux.org/groups/index.html. >>>>>>>>> They will know your Country's modem code, which may be essential >>>>>>>>> for >>>>>>>>> dialup >>>>>>>>> service. >>>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>>>>>>>> Internet >>>>>>>>> Provider mail filters. >>>>>>>>> So in a day, also check the Archived responses at >>>>>>>>> http://www.linmodems.org >>>>>>>>> -------------------------- System information >>>>>>>>> ---------------------------- >>>>>>>>> CPU=i686, PCLinuxOS release 2009 (PCLinuxOS) for i586 >>>>>>>>> Kernel 2.6.26.8.tex3 on an i686 / >>>>>>>>> Linux version 2.6.26.8.tex3 (cyril@localhost) (gcc version 4.1.1 >>>>>>>>> 20060724 >>>>>>>>> (prerelease) (4.1.1-4pclos2007)) #1 SMP Mon Jan 12 04:33:38 CST >>>>>>>>> 2009 >>>>>>>>> scanModem update of: 2009_02_21 >>>>>>>>> The modem symbolic link is /dev/modem -> ttyS0 >>>>>>>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>>>>>>> Potentially useful modem drivers now loaded are: >>>>>>>>> snd_hda_intel >>>>>>>>> Attached USB devices are: >>>>>>>>> ID 0bc2:0888 Seagate RSS LLC >>>>>>>>> ID 0bda:0151 Realtek Semiconductor Corp. Mass Stroage Device >>>>>>>>> If a cellphone is not detected, see >>>>>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>>>>>>> >>>>>>>>> If a USB modem or cellphone is attached and was not detected, >>>>>>>>> please >>>>>>>>> provide available information in your request to >>>>>>>>> discuss@xxxxxxxxxxxxx >>>>>>>>> >>>>>>>>> For candidate card in slot 03:00.0, firmware information and bootup >>>>>>>>> diagnostics are: >>>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>>> ---------- --------- --------- -------------- >>>>>>>>> 03:00.0 11c1:0630 11c1:0630 Communication controller: >>>>>>>>> Agere >>>>>>>>> Systems >>>>>>>>> Device 0630 >>>>>>>>> >>>>>>>>> Modem interrupt assignment and sharing: >>>>>>>>> --- Bootup diagnostics for card in PCI slot 03:00.0 ---- >>>>>>>>> >>>>>>>>> For candidate card in slot 00:05.0, firmware information and bootup >>>>>>>>> diagnostics are: >>>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>>> ---------- --------- --------- -------------- >>>>>>>>> 00:05.0 10de:03f0 1025:0153 Audio device: nVidia >>>>>>>>> Corporation >>>>>>>>> MCP61 >>>>>>>>> High Definition Audio >>>>>>>>> >>>>>>>>> Modem interrupt assignment and sharing: >>>>>>>>> 22: 8522 IO-APIC-fasteoi ehci_hcd:usb1, HDA Intel >>>>>>>>> --- Bootup diagnostics for card in PCI slot 00:05.0 ---- >>>>>>>>> ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 >>>>>>>>> (level, >>>>>>>>> low) -> >>>>>>>>> IRQ 22 >>>>>>>>> PCI: Setting latency timer of device 0000:00:05.0 to 64 >>>>>>>>> >>>>>>>>> >>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>>>>>>>> The ALSA packages provide audio support and also drivers for some >>>>>>>>> modems. >>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>> folders. >>>>>>>>> >>>>>>>>> The ALSA verion is 1.0.18 >>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>> >>>>>>>>> >>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>> ----------------------- >>>>>>>>> 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 >>>>>>>>> 00-04: ALC888 Analog : ALC888 Analog : capture 1 >>>>>>>>> >>>>>>>>> about /proc/asound/cards: >>>>>>>>> ------------------------ >>>>>>>>> 0 [NVidia ]: HDA-Intel - HDA NVidia >>>>>>>>> HDA NVidia at 0xfe024000 irq 22 >>>>>>>>> >>>>>>>>> PCI slot 00:05.0 has a High Definition Audio Card >>>>>>>>> The drivers are in the kernel modules tree at: >>>>>>>>> >>>>>>>>> UNEXPECTED HDA diagnostic outcome. >>>>>>>>> === Finished firmware and bootup diagnostics, next deducing cogent >>>>>>>>> software. >>>>>>>>> === >>>>>>>>> >>>>>>>>> A candidate modem is not evident among the PCI devices: >>>>>>>>> ------------------------------------------------ >>>>>>>>> 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev >>>>>>>>> a1) >>>>>>>>> 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) >>>>>>>>> 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev >>>>>>>>> a2) >>>>>>>>> 00:05.0 Audio device: nVidia Corporation MCP61 High Definition >>>>>>>>> Audio >>>>>>>>> (rev >>>>>>>>> a2) >>>>>>>>> 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) >>>>>>>>> 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) >>>>>>>>> 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller >>>>>>>>> (rev >>>>>>>>> a2) >>>>>>>>> 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller >>>>>>>>> (rev >>>>>>>>> a2) >>>>>>>>> 00:0d.0 VGA compatible controller: nVidia Corporation GeForce >>>>>>>>> 6150SE >>>>>>>>> nForce >>>>>>>>> 430 (rev a2) >>>>>>>>> 03:00.0 Communication controller: Agere Systems Device 0630 (rev >>>>>>>>> 01) >>>>>>>>> ------------------------------------------------ >>>>>>>>> with USB and bridge devices not displayed. >>>>>>>>> >>>>>>>>> If your modem is connected by an external serial cable, >>>>>>>>> or mounted internally on an ISA card, scanModem would not access >>>>>>>>> it. >>>>>>>>> Try with Root permission >>>>>>>>> $ wvdialconf /etc/wvdial.conf >>>>>>>>> to detect these modem types and some USB modems. >>>>>>>>> If the detection is successful, read the DOCs/wvdial.txt . >>>>>>>>> Edit the /etc/wvdial.conf with Root permission: >>>>>>>>> gedit /etc/wvdial.conf >>>>>>>>> will be able to dial out with Root permission: >>>>>>>>> wvdial >>>>>>>>> >>>>>>>>> Many modems for which scanModem fails have Conexant chips. >>>>>>>>> From http://www.linuxant.com/drivers/modemident.php >>>>>>>>> get the ListModem tool, which will report on Conexant chipset >>>>>>>>> modems >>>>>>>>> >>>>>>>>> If the above tests fail, please provide any independent information >>>>>>>>> available on your modem. >>>>>>>>> If an alternative boot into Microsoft windows can be done, do mouse >>>>>>>>> clicks on: >>>>>>>>> Start > Settings > Control Panel > Classical View (for Window XP) >>>>>>>>> > >>>>>>>>> System >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hardware > Device Manager > Modems > Click on the + > Modem. >>>>>>>>>> Double >>>>>>>>>> click >>>>>>>>>> to >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> expand the graphic. Manufacturer information may be displayed. For >>>>>>>>> example, >>>>>>>>> CXT >>>>>>>>> stands for Conexant. Click the Diagnostics Tab. Record any hardware >>>>>>>>> ID >>>>>>>>> or >>>>>>>>> vendor >>>>>>>>> and device information. From the Driver Details TAB, copy out the >>>>>>>>> VENdor and >>>>>>>>> DEVice information. >>>>>>>>> Next do the Query Modem and record the ATI specifications displayed >>>>>>>>> such as: >>>>>>>>> ATI3 - Agere SoftModem Version 2.1.22 >>>>>>>>> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >>>>>>>>> Try to identify the modem setup file, with name perhaps MODEM.INF. >>>>>>>>> If may contain chipset Vendor informaton. >>>>>>>>> >>>>>>>>> >>>>>>>>> Predictive diagnostics for card in bus 00:05.0: >>>>>>>>> Modem chipset not detected on >>>>>>>>> NAME="Audio device: nVidia Corporation MCP61 High Definition Audio >>>>>>>>> " >>>>>>>>> CLASS=0403 >>>>>>>>> PCIDEV=10de:03f0 >>>>>>>>> SUBSYS=1025:0153 >>>>>>>>> IRQ=22 >>>>>>>>> HDA=10de:03f0 >>>>>>>>> SOFT=10de:03f0.HDA >>>>>>>>> >>>>>>>>> >>>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in their >>>>>>>>> Subsystem, >>>>>>>>> and many are supported by the ALSA audio+modem driver snd-hda-intel >>>>>>>>> A modem was not detected on HDA card 10de:03f0. >>>>>>>>> If another modem card is present, then most likely 10de:03f0 does >>>>>>>>> not >>>>>>>>> host a >>>>>>>>> modem. >>>>>>>>> If another modem card has not been detected, then possibilities >>>>>>>>> are: >>>>>>>>> 1) A Conexant modem chip is present on 10de:03f0, as Conexant >>>>>>>>> chips >>>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>>> 2) The modem may be of the older non-PCI Controller Chipset >>>>>>>>> (hardware) >>>>>>>>> type. >>>>>>>>> Try detection with Root permission: >>>>>>>>> wvdialconf /etc/wvdial.conf >>>>>>>>> >>>>>>>>> For candidate modem in: 00:05.0 >>>>>>>>> 0403 Audio device: nVidia Corporation MCP61 High Definition Audio >>>>>>>>> Primary device ID: 10de:03f0 >>>>>>>>> Subsystem PCI_id 1025:0153 >>>>>>>>> Softmodem codec or chipset from diagnostics: >>>>>>>>> from Archives: >>>>>>>>> >>>>>>>>> Support type needed or chipset: >>>>>>>>> Support can likely be achieved through two mutually exclusive >>>>>>>>> alternatives: >>>>>>>>> 1) The hsfmodem software for Conexant chipset modems: Read >>>>>>>>> DOCs/Conexant.txt >>>>>>>>> The following ALSA alternative CANNOT work with Conexant modems. >>>>>>>>> >>>>>>>>> 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for >>>>>>>>> details, >>>>>>>>> and >>>>>>>>> to test get the package SLMODEMD.gcc4.1.tar.gz from: >>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>> >>>>>>>>> ----------------end Softmodem section -------------- >>>>>>>>> >>>>>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver source >>>>>>>>> package >>>>>>>>> with full speed enabled is available, but requires driver >>>>>>>>> compiling. >>>>>>>>> Read >>>>>>>>> DOCs/Conexant.txt >>>>>>>>> >>>>>>>>> >>>>>>>>> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php >>>>>>>>> to >>>>>>>>> find >>>>>>>>> the >>>>>>>>> hsfmodem package matching your System. For several Linux distros, >>>>>>>>> there >>>>>>>>> are >>>>>>>>> precompiled drivers matched to specific kernels. These have within >>>>>>>>> the >>>>>>>>> FileName, >>>>>>>>> your KernelVersion: 2.6.26.8.tex3 >>>>>>>>> They can be found through >>>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads.php >>>>>>>>> A more precise location may be given a few paragraphs below. >>>>>>>>> If an EXACT Match with your your KernelVersion is not found, one of >>>>>>>>> the >>>>>>>>> "Generic packages with source" near the bottom of the page must be >>>>>>>>> used. >>>>>>>>> Downloaded packages must be moved into the Linux partition (home >>>>>>>>> folder >>>>>>>>> is >>>>>>>>> OK) >>>>>>>>> and unzipped with: >>>>>>>>> unzip hsf*.zip >>>>>>>>> The installation command for a .deb suffic packages is, with >>>>>>>>> root/adm >>>>>>>>> permission: >>>>>>>>> dpkg -i hsf*.deb >>>>>>>>> while for .rpm suffix it is, with: >>>>>>>>> rpm -i hsf*.rpm >>>>>>>>> >>>>>>>>> Support for Conexant chips hosted on High Definition Audio cards >>>>>>>>> may >>>>>>>>> require >>>>>>>>> installation of additional packages, one of the >>>>>>>>> alsa-driver-linuxant >>>>>>>>> packages >>>>>>>>> on http://www.linuxant.com/alsa-driver/ At the same time download >>>>>>>>> the >>>>>>>>> alsa-driver-1.0.17-1.patch , in case it prove to be later needed. >>>>>>>>> During the >>>>>>>>> hsfmodem install, there will be a message if there is necessary >>>>>>>>> installation >>>>>>>>> of >>>>>>>>> alsa-driver-linuxant >>>>>>>>> >>>>>>>>> The installation command for a .deb suffic packages is, with >>>>>>>>> root/adm >>>>>>>>> permission: >>>>>>>>> alsa* -i hsf*.deb >>>>>>>>> while for .rpm suffix it is, with: >>>>>>>>> rpm -i hsf*.rpm >>>>>>>>> >>>>>>>>> There may a message that "Dependencies" are not satisfied. In this >>>>>>>>> case the >>>>>>>>> Ubuntu/Debian packages to be installed are linux-libc-dev & >>>>>>>>> libc6-dev. >>>>>>>>> Package >>>>>>>>> names may be different for other Linuxes. If not on your install >>>>>>>>> CD, >>>>>>>>> these >>>>>>>>> packages can be searched for at http://packages.ubuntu.com. After >>>>>>>>> download, >>>>>>>>> they can be coinstalled with: >>>>>>>>> dpkg -i li*.deb >>>>>>>>> Again try the alsa-driver-linuxant >>>>>>>>> >>>>>>>>> There may be a message that the patch must be applied. In this >>>>>>>>> case >>>>>>>>> get the >>>>>>>>> ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 >>>>>>>>> Under Linux, this package is unpacked with: >>>>>>>>> $ tar jxf alsa*.tar.bz2 >>>>>>>>> Next the patch is applied with: >>>>>>>>> $ patch -p0 < alsa-driver-1.0.17-1.patch >>>>>>>>> >>>>>>>>> See >>>>>>>>> >>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html >>>>>>>>> for details on compiling and installing replacement snd-hda-intel + >>>>>>>>> its >>>>>>>>> dependent drivers. >>>>>>>>> After the installation is completed, rerun the hsfmodem >>>>>>>>> installation. >>>>>>>>> Reboot and try to detect the modem with Root permission: >>>>>>>>> wvdialconf /etc/wvdial.conf >>>>>>>>> >>>>>>>>> Start at http://www.linuxant.com/drivers/hsf/full for >>>>>>>>> eventually download of a hsfmodem-7.68.00.12full_k.???.zip package >>>>>>>>> with ??? the package type (deb, rpm, tar etc) >>>>>>>>> These packages have compiled drivers but will also compile a >>>>>>>>> driver, >>>>>>>>> if there is a mismatch between the resident kernel and provided >>>>>>>>> driver. >>>>>>>>> The generic hsfmodem-7.68.00.12full.tar.gz package only provides >>>>>>>>> compiling >>>>>>>>> support >>>>>>>>> >>>>>>>>> Read DOCs/Conexant.txt >>>>>>>>> >>>>>>>>> Writing DOCs/Conexant.txt >>>>>>>>> >>>>>>>>> Writing DOCs/Smartlink.txt >>>>>>>>> ============ end Smartlink section ===================== >>>>>>>>> >>>>>>>>> >>>>>>>>> Predictive diagnostics for card in bus 03:00.0: >>>>>>>>> Modem chipset not detected on >>>>>>>>> NAME="Communication controller: Agere Systems Device 0630 " >>>>>>>>> CLASS=0780 >>>>>>>>> PCIDEV=11c1:0630 >>>>>>>>> SUBSYS=11c1:0630 >>>>>>>>> IRQ=10 >>>>>>>>> >>>>>>>>> For candidate modem in: 03:00.0 >>>>>>>>> 0780 Communication controller: Agere Systems Device 0630 >>>>>>>>> Primary device ID: 11c1:0630 >>>>>>>>> Support type needed or chipset: >>>>>>>>> >>>>>>>>> ----------------end Softmodem section -------------- >>>>>>>>> >>>>>>>>> scanModem could not identify the Support Type needed from >>>>>>>>> diagnosics >>>>>>>>> or >>>>>>>>> archives. >>>>>>>>> If an alternative boot into Microsoft windows can be done, do >>>>>>>>> mouse >>>>>>>>> clicks on: >>>>>>>>> Start > Settings > Control Panel > Classical View (for Window XP) >>>>>>>>> > >>>>>>>>> System >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hardware > Device Manager > Modems > Click on the + > Modem. >>>>>>>>>> Double >>>>>>>>>> click >>>>>>>>>> to >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> expand the graphic. Manufacturer information may be displayed. For >>>>>>>>> example, >>>>>>>>> CXT >>>>>>>>> stands for Conexant. Click the Diagnostics Tab. Record any hardware >>>>>>>>> ID >>>>>>>>> or >>>>>>>>> vendor >>>>>>>>> and device information. >>>>>>>>> Next do the Query Modem and record the ATI specifications displayed >>>>>>>>> such as: >>>>>>>>> ATI3 - Agere SoftModem Version 2.1.22 >>>>>>>>> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >>>>>>>>> Try to identify the modem setup file, with name perhaps MODEM.INF. >>>>>>>>> If may contain chipset Vendor informaton. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> The base of the UDEV device file system is: /dev/.udev >>>>>>>>> >>>>>>>>> Versions adequately match for the compiler installed: 4.1.1 >>>>>>>>> and the compiler used in kernel assembly: 4.1.1 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Minimal compiling resources appear complete: >>>>>>>>> make utility - /usr/bin/make >>>>>>>>> Compiler version 4.1 >>>>>>>>> linuc_headers base folder /lib/modules/2.6.26.8.tex3/build >>>>>>>>> >>>>>>>>> However some compilations and executable functions may need >>>>>>>>> additional >>>>>>>>> files, >>>>>>>>> in the FileNames.h (so called kernel "h"eaders) collection >>>>>>>>> installed >>>>>>>>> in >>>>>>>>> /usr/include/ . >>>>>>>>> For martian_modem, additional required packages are needed. The >>>>>>>>> also >>>>>>>>> required headers of package libc6 are commonly installed by >>>>>>>>> default. >>>>>>>>> Compiling hsfmodem drivers does require linux-libc-dev and >>>>>>>>> libc6-dev >>>>>>>>> packages, for kernels 2.6.24 and later versions. >>>>>>>>> In not included on your install CD, search for them at >>>>>>>>> http://packages.ubuntu.com >>>>>>>>> or comparable Repository for other Linux distros. >>>>>>>>> When compiling ALSA drivers, the utility "patch" will also be >>>>>>>>> needed. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> If a driver compilation fails, with message including some lack of >>>>>>>>> some >>>>>>>>> FileName.h (stdio.h for example), then >>>>>>>>> Some additional kernel-header files need installation to >>>>>>>>> /usr/include. >>>>>>>>> The >>>>>>>>> minimal additional packages are libc6-dev >>>>>>>>> and any of its dependents, under Ubuntu linux-libc-dev >>>>>>>>> >>>>>>>>> If an alternate ethernet connection is available, >>>>>>>>> $ apt-get update >>>>>>>>> $ apt-get -s install linux-kernel-devel >>>>>>>>> will install needed packages. >>>>>>>>> For Debian/Ubuntu related distributions, run the following command >>>>>>>>> to >>>>>>>>> display the needed package list: >>>>>>>>> >>>>>>>>> Otherwise packages have to be found through >>>>>>>>> http://packages.ubuntu.com >>>>>>>>> Once downloaded and transferred into a Linux partition, >>>>>>>>> they can be installed alltogether with: >>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>> >>>>>>>>> >>>>>>>>> Checking pppd properties: >>>>>>>>> -rwsr-xr-t 1 root root 304536 Nov 6 2006 /usr/sbin/pppd >>>>>>>>> >>>>>>>>> In case of an "error 17" "serial loopback" problem, see: >>>>>>>>> >>>>>>>>> >>>>>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>>>>>>>> >>>>>>>>> To enable dialout without Root permission do: >>>>>>>>> $ su - root (not for Ubuntu) >>>>>>>>> chmod a+x /usr/sbin/pppd >>>>>>>>> or under Ubuntu related Linuxes >>>>>>>>> chmod a+x /usr/sbin/pppd >>>>>>>>> >>>>>>>>> Checking settings of: /etc/ppp/options >>>>>>>>> lock >>>>>>>>> noauth >>>>>>>>> noipdefault >>>>>>>>> usepeerdns >>>>>>>>> >>>>>>>>> In case of a message like: >>>>>>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>>>>>>>> see >>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>>>>>>> >>>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 >>>>>>>>> Which can interfere with Browser naviagation. >>>>>>>>> >>>>>>>>> Don't worry about the following, it is for experts should trouble >>>>>>>>> shooting >>>>>>>>> be necessary. >>>>>>>>> ========================================================== >>>>>>>>> >>>>>>>>> L modem ttyS0 >>>>>>>>> Checking for modem support lines: >>>>>>>>> -------------------------------------- >>>>>>>>> /device/modem symbolic link: lrwxrwxrwx 1 root root 5 Apr 3 >>>>>>>>> 17:49 >>>>>>>>> /dev/modem -> ttyS0 >>>>>>>>> slmodemd created symbolic link /dev/ttySL0: Within /etc/udev/ >>>>>>>>> files: >>>>>>>>> /etc/udev/devices.d/modem.nodes:L modem ttyS0 >>>>>>>>> Within /etc/modprobe.conf files: >>>>>>>>> >>>>>>>>> Within any ancient /etc/devfs files: >>>>>>>>> >>>>>>>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>>>>>>> >>>>>>>>> --------- end modem support lines -------- >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>> >>>> >> >> > <div><br></div>
