Thanks for the answer, I had the hsfmodem_7.68.00.14full_i386.deb package from Linuxant installed, but GnomePPP which I used to search my modem didn't find any modem allthough there are two modems at the pci-slots. But before you said, that it seems to be the right one I deinstalled it again because it didn't work. After your answer I tried it again, but still no modem with neither wvdialconf nor gnomeppp. Now I have a fresh Ubuntu 8.10. Can you tell me which package I should install. Is there a free alternative from Linuxant (I know they have the free but still speed limited one)? So far, appreciate your answer. Best regards Timo > TImo, > > There seems to be a functional hsdmodem package installed. > Try: > $ sudo wvdialconf > which should detect the modem. > If so edit in your personal information with: > $ sudo gedit /etc/wvdial.conf > removing the symbols ; < > > $ man wvdial.conf > will relate details. > > Then you should be able to dailout with: > $ sudo wvdial > > MarvS > > On Mon, Apr 6, 2009 at 10:36 AM, Timo Kosiol <timo@xxxxxxxxx> wrote: >> Hello, >> I would like to get your help to install two modems on my Ubuntu 8.10. >> I tried a lot the last days, but i didn't found a driver / documentation >> to get my 2 modems at the pci-slots to work. >> Here the text from ScanModem. >> >> ModemData.txt: >> Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List >> Server, >>  as HTML can contain viruses. Use as the email Subject Line: >>      YourName, YourCountry  kernel 2.6.27-7-generic >>  With this Subject Line cogent experts will be alerted, and useful case >> names left in the Archive. >>  YourCountry will enable Country specific guidance. Linux experts in >> YourCountry >>  can be found through: http://www.linux.org/groups/index.html. >> They will know your Country's modem code, which may be essential for >> dialup service. >> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >> Internet >> Provider mail filters. >>  So in a day, also check the Archived responses at >> http://www.linmodems.org >> --------------------------  System information >> ---------------------------- >> CPU=i686, >> Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 >> (Ubuntu >> 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 >>  scanModem update of:  2009_02_21 >> The modem symbolic link is /dev/modem -> ttySHSF0 >>  There are no blacklisted modem drivers in /etc/modprobe*  files >>  Potentially useful modem drivers now loaded are: >>   hsfserial   snd_hda_intel >> >> Attached USB devices are: >>  ID 0951:1607 Kingston Technology Data Traveler 2.0 >>  ID 0951:1613 Kingston Technology >> If a cellphone is not detected, see >> http://ubuntuforums.org/archive/index.php/t-878554.html >> >> If a USB modem or cellphone is attached and was not detected, please >> provide available information in your request to discuss@xxxxxxxxxxxxx >> >> For candidate card in slot 04:06.0, firmware information and bootup >> diagnostics are: >>  PCI slot    PCI ID      SubsystemID   Name >>  ----------   ---------    ---------    -------------- >>  04:06.0     11c1:0620    11c1:0620    Communication >> controller: Agere Systems >> Device 0620 >> >>  Modem interrupt assignment and sharing: >>  --- Bootup diagnostics for card in PCI slot 04:06.0 ---- >> [   0.484699] PCI: 0000:04:06.0 reg 10 io port: [b000, b0ff] >> [   0.484743] pci 0000:04:06.0: PME# supported from D3hot D3cold >> [   0.484748] pci 0000:04:06.0: PME# disabled >> >>  The PCI slot 04:06.0 of the modem card may be disabled early in >>  a bootup process,  but then enabled later. If modem drivers load >>  but the  modem is not responsive, read DOCs/Bootup.txt about possible >> fixes. >>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>  if help is needed. >> >> >> For candidate card in slot 00:1b.0, firmware information and bootup >> diagnostics are: >>  PCI slot    PCI ID      SubsystemID   Name >>  ----------   ---------    ---------    -------------- >>  00:1b.0     8086:27d8    8086:d608    Audio device: >> Intel Corporation 82801G >> >>  Modem interrupt assignment and sharing: >>  16:    20354     69  IO-APIC-fasteoi  uhci_hcd:usb4, >> HDA Intel, >> i915@pci:0000:00:02.0 >>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >> [   0.481613] PCI: 0000:00:1b.0 reg 10 64bit mmio: [feb80000, >> feb83fff] >> [   0.481613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >> [   0.481613] pci 0000:00:1b.0: PME# disabled >> [  21.141937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) >> -> >> IRQ 16 >> [  21.141955] HDA Intel 0000:00:1b.0: setting latency timer to 64 >> >>  The PCI slot 00:1b.0 of the modem card may be disabled early in >>  a bootup process,  but then enabled later. If modem drivers load >>  but the  modem is not responsive, read DOCs/Bootup.txt about possible >> fixes. >>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>  if help is needed. >> >> >> >> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >> The ALSA packages provide audio support and also drivers for some >> modems. >> ALSA diagnostics are written during bootup to /proc/asound/ folders. >> >> The ALSA verion is 1.0.17 >> The modem cards detected by "aplay -l"  are: None >> >> >> The /proc/asound/pcm file reports: >> ----------------------- >> 00-02: ALC883 Analog : ALC883 Analog : capture 2 >> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2 >> >> about /proc/asound/cards: >> ------------------------ >>  0 [Intel      ]: HDA-Intel - HDA Intel >>            HDA Intel at 0xfeb80000 irq 16 >> >>  PCI slot 00:1b.0 has a High Definition Audio Card >>  The drivers are in the kernel modules tree at: >>  /lib/modules/2.6.27-7-generic/updates/snd-hda-intel.ko >> UNEXPECTED HDA diagnostic outcome. >> === Finished firmware and bootup diagnostics, next deducing cogent >> software. === >> >> Predictive  diagnostics for card in bus 04:06.0: >>     Modem chipset  detected on >> NAME="Communication controller: Agere Systems Device 0620" >> CLASS=0780 >> PCIDEV=11c1:0620 >> SUBSYS=11c1:0620 >> IRQ=11 >> IDENT=agrsm >> >>  For candidate modem in:  04:06.0 >>  0780 Communication controller: Agere Systems Device 0620 >>    Primary device ID:  11c1:0620 >>  Support type needed or chipset:     agrsm >> >> >> ----------------end Softmodem section -------------- >> >> Writing DOCs/Intel.txt >> >> >> Predictive  diagnostics for card in bus 00:1b.0: >>     Modem chipset not detected on >> NAME="Audio device: Intel Corporation 82801G " >> CLASS=0403 >> PCIDEV=8086:27d8 >> SUBSYS=8086:d608 >> IRQ=16 >> HDA=8086:27d8 >> SOFT=8086:27d8.HDA >> >> >>  High Definition Audio (HDA) cards MAY host a modem chip in their >> Subsystem, >>  and many are supported by the ALSA audio+modem driver snd-hda-intel >>  A modem was not detected on HDA card 8086:27d8. >>  If another modem card is present, then most likely 8086:27d8 does not >> host a modem. >>  If another modem card has not been detected, then possibilities are: >>     1) A Conexant modem chip is present on 8086:27d8, as Conexant >> chips >>  are frequently not detectable by ALSA diagnostics >>     2) The modem may be of the older non-PCI Controller Chipset >> (hardware) type. >> Try detection with Root permission: >>     sudo wvdialconf  /etc/wvdial.conf >> >>  For candidate modem in:  00:1b.0 >>  0403 Audio device: Intel Corporation 82801G >>    Primary device ID:  8086:27d8 >>   Subsystem PCI_id  8086:d608 >>   Softmodem codec or chipset from diagnostics: >>                from   Archives: >> >> >> >> Support type needed or chipset: >> >> Support can likely be achieved through two mutually exclusive >> alternatives: >> 1) The hsfmodem software for Conexant chipset modems: Read >> DOCs/Conexant.txt >> The following ALSA alternative CANNOT work with Conexant modems. >> >> 2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for >> details, and >> to test get the package SLMODEMD.gcc4.3.tar.gz from: >>     http://linmodems.technion.ac.il/packages/smartlink/ >> >> ----------------end Softmodem section -------------- >> Writing DOCs/Smartlink.txt >> ============ end Smartlink section ===================== >> >>  Completed candidate modem analyses. >> >>  The base of the UDEV device file system is: /dev/.udev >> >>  Versions adequately match for the compiler installed: 4.3.2 >>       and the compiler used in kernel assembly: 4.3.2 >> >>  The patch utility is needed and is needed for compiling ALSA drivers, >> and >> possibly others. >> >> >>  Minimal compiling resources appear complete: >>  make utility - /usr/bin/make >>  Compiler version 4.3 >>  linuc_headers base folder /lib/modules/2.6.27-7-generic/build >> >>  However some compilations and executable functions may need additional >> files, >>  in the FileNames.h (so called kernel "h"eaders) collection installed >> in >> /usr/include/ . >>  For martian_modem, additional required packages are needed. The also >> required headers of package libc6 are commonly installed by default. >>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev >> packages, for kernels 2.6.24 and later versions. >>  In not included on your install CD, search for them at >> http://packages.ubuntu.com >>  or comparable Repository for other Linux distros. >>  When compiling ALSA drivers, the utility "patch" will also be needed. >> >> >> >> >> If a driver compilation fails, with message including some lack of some >> FileName.h (stdio.h for example), then >> Some additional kernel-header files need installation to /usr/include. >> The >> minimal additional packages are libc6-dev >> and any of its dependents, under Ubuntu linux-libc-dev >> >> If an alternate ethernet connection is available, >> $  apt-get update >> $  apt-get -s install linux-kernel-devel >> will install needed packages. >> For Debian/Ubuntu related distributions, run the following command to >> display the needed package list: >> >> Otherwise packages have to be found through http://packages.ubuntu.com >> Once downloaded and transferred into a Linux partition, >> they can be installed alltogether with: >> $ sudo dpkg -i *.deb >> >> >> Checking pppd properties: >>     -rwsr-xr-- 1 root dip 273064 2008-10-15 20:51 /usr/sbin/pppd >> >> In case of an "error 17" "serial loopback" problem, see: >>  >>  http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >> >> To enable dialout without Root permission do: >>     $ su - root  (not for Ubuntu) >>     sudo chmod a+x /usr/sbin/pppd >> or under Ubuntu related Linuxes >>     sudo chmod a+x /usr/sbin/pppd >> >> Checking settings of:  /etc/ppp/options >> asyncmap 0 >> noauth >> crtscts >> lock >> hide-password >> modem >> proxyarp >> lcp-echo-interval 30 >> lcp-echo-failure 4 >> noipx >> >> In case of a message like: >>  Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >> >> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 >> Which can interfere with Browser naviagation. >> >>  Don't worry about the following, it is for experts should trouble >> shooting be necessary. >> ========================================================== >> >>  Checking for modem support lines: >>  -------------------------------------- >>   /device/modem symbolic link:  lrwxrwxrwx 1 root root 8 >> 2009-04-03 >> 11:29 /dev/modem -> ttySHSF0 >> slmodemd created symbolic link /dev/ttySL0: >>   Within /etc/udev/ files: >> /etc/udev/rules.d/00-hcfpci.rules:KERNEL=="ttySHCF0", SYMLINK="modem" >> /etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem" >>   Within /etc/modprobe.conf files: >> /etc/modprobe.d/hcfpci.conflicts:install snd-via82xx-modem /bin/true # >> temporarily disabled by hcfpci - conflicts with hsfmc97via >> /etc/modprobe.d/hcfpci.conflicts:install snd-atiixp-modem /bin/true # >> temporarily disabled by hcfpci - conflicts with hsfmc97ati >> /etc/modprobe.d/hsf.conflicts:install snd-via82xx-modem /bin/true # >> temporarily disabled by hsf - conflicts with hsfmc97via >> /etc/modprobe.d/hsf.conflicts:install snd-atiixp-modem /bin/true # >> temporarily disabled by hsf - conflicts with hsfmc97ati >> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to >> blacklist unwanted modem drivers >> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >> /etc/modprobe.d/hcfpci:alias /dev/modem /dev/ttySHCF >> /etc/modprobe.d/hsf:alias /dev/modem /dev/ttySHSF >> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >>   Within any ancient /etc/devfs files: >> >>   Within ancient kernel 2.4.n /etc/module.conf files: >> /etc/modules.conf:alias /dev/modem /dev/ttySHSF >> /etc/modules.conf:alias /dev/modem /dev/ttySHCF >> --------- end modem support lines -------- >> >> Dmesg.txt: >>      CPU0    CPU1 >>  0:     117      1  IO-APIC-edge    timer >>  1:     22     60  IO-APIC-edge    i8042 >>  4:      1      2  IO-APIC-edge >>  8:     27     30  IO-APIC-edge    rtc0 >>  9:      0      0  IO-APIC-fasteoi  acpi >>  12:    5877    7021  IO-APIC-edge    i8042 >>  14:    3761    5157  IO-APIC-edge    ata_piix >>  15:      0      0  IO-APIC-edge    ata_piix >>  16:    20360     69  IO-APIC-fasteoi  uhci_hcd:usb4, >> HDA Intel, >> i915@pci:0000:00:02.0 >>  18:      0      0  IO-APIC-fasteoi  >> uhci_hcd:usb3 >>  19:     857     876  IO-APIC-fasteoi  uhci_hcd:usb2, >> ata_piix >>  23:    1214    1544  IO-APIC-fasteoi  uhci_hcd:usb1, >> ehci_hcd:usb5 >> 220:     82     186  PCI-MSI-edge    eth0 >> NMI:      0      0  Non-maskable interrupts >> LOC:    13453    13867  Local timer interrupts >> RES:    2480    2804  Rescheduling interrupts >> CAL:    7847    30667  function call interrupts >> TLB:     973     939  TLB shootdowns >> SPU:      0      0  Spurious interrupts >> ERR:      0 >> MIS:      0 >> >> [   0.000000] Initializing cgroup subsys cpuset >> [   0.000000] Initializing cgroup subsys cpu >> [   0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc >> version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC >> 2008 (Ubuntu 2.6.27-7.14-generic) >> [   0.000000] BIOS-provided physical RAM map: >> [   0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 >> (usable) >> [   0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 >> (reserved) >> [   0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 >> (reserved) >> [   0.000000]  BIOS-e820: 0000000000100000 - 000000007f23a000 >> (usable) >> [   0.000000]  BIOS-e820: 000000007f23a000 - 000000007f27d000 (ACPI >> NVS) >> [   0.000000]  BIOS-e820: 000000007f27d000 - 000000007f355000 >> (reserved) >> [   0.000000]  BIOS-e820: 000000007f355000 - 000000007f365000 (ACPI >> NVS) >> [   0.000000]  BIOS-e820: 000000007f365000 - 000000007f3e1000 >> (reserved) >> [   0.000000]  BIOS-e820: 000000007f3e1000 - 000000007f3e7000 (ACPI >> data) >> [   0.000000]  BIOS-e820: 000000007f3e7000 - 000000007f3e8000 (ACPI >> NVS) >> [   0.000000]  BIOS-e820: 000000007f3e8000 - 000000007f3ea000 (ACPI >> data) >> [   0.000000]  BIOS-e820: 000000007f3ea000 - 000000007f3ec000 (ACPI >> NVS) >> [   0.000000]  BIOS-e820: 000000007f3ec000 - 000000007f3ed000 >> (reserved) >> [   0.000000]  BIOS-e820: 000000007f3ed000 - 000000007f3f1000 (ACPI >> NVS) >> [   0.000000]  BIOS-e820: 000000007f3f1000 - 000000007f400000 >> (reserved) >> [   0.000000]  BIOS-e820: 000000007f400000 - 000000007f600000 >> (usable) >> [   0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 >> (reserved) >> [   0.000000]  BIOS-e820: 00000000ffa00000 - 00000000ffc00000 >> (reserved) >> [   0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 >> (reserved) >> [   0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000 >> [   0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 >> [   0.000000] RAMDISK: 37823000 - 37fefee1 >> [   0.000000] DMI 2.4 present. >> [   0.000000] ACPI: RSDP 000F03C0, 0024 (r2  INTEL) >> [   0.000000] ACPI: XSDT 7F3E8F10, 0044 (r1  INTEL  DG31PR >>  6222004 MSFT >>  10013) >> [   0.000000] ACPI: FACP 7F3E6D90, 00F4 (r4  INTEL  DG31PR >>  6222004 MSFT >>  10013) >> [   0.000000] ACPI: DSDT 7F3E1010, 4A8F (r1  INTEL  DG31PR   >>   0 INTL >> 20051117) >> [   0.000000] ACPI: FACS 7F3E7F40, 0040 >> [   0.000000] ACPI: APIC 7F3E6F10, 006C (r2  INTEL  DG31PR >>  6222004 MSFT >>  10013) >> [   0.000000] ACPI: HPET 7F3EFD10, 0038 (r1  INTEL ICH7HPET >>  6222004 AMI. >>    1) >> [   0.000000] ACPI: MCFG 7F3EFC10, 003C (r1 INTEL  DG31PR  >>  6222004 MSFT >>    97) >> [   0.000000] 1142MB HIGHMEM available. >> [   0.000000] 896MB LOWMEM available. >> [   0.000000]  mapped low ram: 0 - 38000000 >> [   0.000000]  low ram: 00000000 - 38000000 >> [   0.000000]  bootmap 00008000 - 0000f000 >> [   0.000000] (9 early reservations) ==> bootmem [0000000000 - >> 0038000000] >> [   0.000000]  #0 [0000000000 - 0000001000]  BIOS data page ==> >> [0000000000 - 0000001000] >> [   0.000000]  #1 [0000001000 - 0000002000]   EX TRAMPOLINE ==> >> [0000001000 - 0000002000] >> [   0.000000]  #2 [0000006000 - 0000007000]    TRAMPOLINE ==> >> [0000006000 - 0000007000] >> [   0.000000]  #3 [0000100000 - 00005c0a20]   TEXT DATA BSS ==> >> [0000100000 - 00005c0a20] >> [   0.000000]  #4 [0037823000 - 0037fefee1]      RAMDISK >> ==> >> [0037823000 - 0037fefee1] >> [   0.000000]  #5 [00005c1000 - 00005c4000]   INIT_PG_TABLE ==> >> [00005c1000 - 00005c4000] >> [   0.000000]  #6 [000009fc00 - 0000100000]   BIOS reserved ==> >> [000009fc00 - 0000100000] >> [   0.000000]  #7 [0000007000 - 0000008000]      PGTABLE >> ==> >> [0000007000 - 0000008000] >> [   0.000000]  #8 [0000008000 - 000000f000]      BOOTMAP >> ==> >> [0000008000 - 000000f000] >> [   0.000000] found SMP MP-table at [c00fd420] 000fd420 >> [   0.000000] Zone PFN ranges: >> [   0.000000]  DMA    0x00000000 -> 0x00001000 >> [   0.000000]  Normal  0x00001000 -> 0x00038000 >> [   0.000000]  HighMem  0x00038000 -> 0x0007f600 >> [   0.000000] Movable zone start PFN for each node >> [   0.000000] early_node_map[3] active PFN ranges >> [   0.000000]   0: 0x00000000 -> 0x0000009f >> [   0.000000]   0: 0x00000100 -> 0x0007f23a >> [   0.000000]   0: 0x0007f400 -> 0x0007f600 >> [   0.000000] On node 0 totalpages: 521177 >> [   0.000000] free_area_init_node: node 0, pgdat c048a500, >> node_mem_map >> c1000000 >> [   0.000000]  DMA zone: 3963 pages, LIFO batch:0 >> [   0.000000]  Normal zone: 223300 pages, LIFO batch:31 >> [   0.000000]  HighMem zone: 289328 pages, LIFO batch:31 >> [   0.000000] ACPI: PM-Timer IO Port: 0x408 >> [   0.000000] ACPI: Local APIC address 0xfee00000 >> [   0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> [   0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >> [   0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) >> [   0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) >> [   0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) >> [   0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, >> GSI 0-23 >> [   0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl >> dfl) >> [   0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >> level) >> [   0.000000] ACPI: IRQ0 used by override. >> [   0.000000] ACPI: IRQ2 used by override. >> [   0.000000] ACPI: IRQ9 used by override. >> [   0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs >> [   0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 >> [   0.000000] Using ACPI (MADT) for SMP configuration information >> [   0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs >> [   0.000000] mapped APIC to ffffb000 (fee00000) >> [   0.000000] mapped IOAPIC to ffffa000 (fec00000) >> [   0.000000] PM: Registered nosave memory: 000000000009f000 - >> 00000000000a0000 >> [   0.000000] PM: Registered nosave memory: 00000000000a0000 - >> 00000000000e0000 >> [   0.000000] PM: Registered nosave memory: 00000000000e0000 - >> 0000000000100000 >> [   0.000000] Allocating PCI resources starting at 80000000 (gap: >> 7f600000:7f71c000) >> [   0.000000] PERCPU: Allocating 41628 bytes of per cpu data >> [   0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 >> [   0.000000] Built 1 zonelists in Zone order, mobility grouping on. >> Total pages: 516591 >> [   0.000000] Kernel command line: >> root=UUID=c9892d2d-3f6f-4b50-9580-f36a7635e015 ro quiet splash >> [   0.000000] Enabling fast FPU save and restore... done. >> [   0.000000] Enabling unmasked SIMD FPU exception support... done. >> [   0.000000] Initializing CPU#0 >> [   0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) >> [   0.000000] Extended CMOS year: 2000 >> [   0.000000] TSC: PIT calibration confirmed by PMTIMER. >> [   0.000000] TSC: using PMTIMER calibration value >> [   0.000000] Detected 2199.948 MHz processor. >> [   0.004000] Console: colour VGA+ 80x25 >> [   0.004000] console [tty0] enabled >> [   0.004000] Dentry cache hash table entries: 131072 (order: 7, >> 524288 >> bytes) >> [   0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 >> bytes) >> [   0.004000] Memory: 2051644k/2086912k available (2572k kernel code, >> 32268k reserved, 1160k data, 424k init, 1167592k highmem) >> [   0.004000] virtual kernel memory layout: >> [   0.004000]   fixmap  : 0xffc77000 - 0xfffff000  (3616 kB) >> [   0.004000]   pkmap  : 0xff400000 - 0xff800000  (4096 kB) >> [   0.004000]   vmalloc : 0xf8800000 - 0xff3fe000  ( 107 MB) >> [   0.004000]   lowmem  : 0xc0000000 - 0xf8000000  ( 896 MB) >> [   0.004000]    .init : 0xc04ab000 - 0xc0515000  ( 424 kB) >> [   0.004000]    .data : 0xc038329a - 0xc04a5680  (1160 kB) >> [   0.004000]    .text : 0xc0100000 - 0xc038329a  (2572 kB) >> [   0.004000] Checking if this processor honours the WP bit even in >> supervisor mode...Ok. >> [   0.004000] CPA: page pool initialized 1 of 1 pages preallocated >> [   0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, >> CPUs=4, Nodes=1 >> [   0.004000] hpet clockevent registered >> [   0.004000] Calibrating delay loop (skipped), value calculated >> using >> timer frequency.. 4399.89 BogoMIPS (lpj=8799792) >> [   0.004000] Security Framework initialized >> [   0.004000] SELinux:  Disabled at boot. >> [   0.004000] AppArmor: AppArmor initialized >> [   0.004000] Mount-cache hash table entries: 512 >> [   0.004000] Initializing cgroup subsys ns >> [   0.004000] Initializing cgroup subsys cpuacct >> [   0.004000] Initializing cgroup subsys memory >> [   0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K >> [   0.004000] CPU: L2 cache: 1024K >> [   0.004000] CPU: Physical Processor ID: 0 >> [   0.004000] CPU: Processor Core ID: 0 >> [   0.004000] using mwait in idle threads. >> [   0.004000] Checking 'hlt' instruction... OK. >> [   0.017783] ACPI: Core revision 20080609 >> [   0.019469] ACPI: Checking initramfs for custom DSDT >> [   0.323343] ENABLING IO-APIC IRQs >> [   0.323514] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >> [   0.363212] CPU0: Intel(R) Pentium(R) Dual  CPU  E2200  @ >> 2.20GHz >> stepping 0d >> [   0.364022] Booting processor 1/1 ip 6000 >> [   0.004000] Initializing CPU#1 >> [   0.004000] Calibrating delay using timer specific routine.. >> 4399.88 >> BogoMIPS (lpj=8799764) >> [   0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K >> [   0.004000] CPU: L2 cache: 1024K >> [   0.004000] CPU: Physical Processor ID: 0 >> [   0.004000] CPU: Processor Core ID: 1 >> [   0.448385] CPU1: Intel(R) Pentium(R) Dual  CPU  E2200  @ >> 2.20GHz >> stepping 0d >> [   0.448400] checking TSC synchronization [CPU#0 -> CPU#1]: passed. >> [   0.452048] Brought up 2 CPUs >> [   0.452051] Total of 2 processors activated (8799.77 BogoMIPS). >> [   0.452073] CPU0 attaching sched-domain: >> [   0.452076]  domain 0: span 0-1 level MC >> [   0.452078]  groups: 0 1 >> [   0.452084] CPU1 attaching sched-domain: >> [   0.452086]  domain 0: span 0-1 level MC >> [   0.452088]  groups: 1 0 >> [   0.452158] net_namespace: 840 bytes >> [   0.452158] Booting paravirtualized kernel on bare hardware >> [   0.452262] Time: 16:29:20  Date: 04/03/09 >> [   0.452289] NET: Registered protocol family 16 >> [   0.452308] EISA bus registered >> [   0.452308] ACPI: bus type pci registered >> [   0.452308] PCI: MCFG configuration 0: base e0000000 segment 0 >> buses 0 >> - 64 >> [   0.452308] PCI: Not using MMCONFIG. >> [   0.465188] PCI: Using configuration type 1 for base access >> [   0.465209] ACPI: EC: Look up EC in DSDT >> [   0.473060] ACPI: Interpreter enabled >> [   0.473064] ACPI: (supports S0 S1 S3 S4 S5) >> [   0.473080] ACPI: Using IOAPIC for interrupt routing >> [   0.473133] PCI: MCFG configuration 0: base e0000000 segment 0 >> buses 0 >> - 64 >> [   0.475863] PCI: MCFG area at e0000000 reserved in ACPI motherboard >> resources >> [   0.475866] PCI: updated MCFG configuration 0: base e0000000 >> segment 0 >> buses 0 - 31 >> [   0.475868] PCI: Using MMCONFIG for extended config space >> [   0.476129] ACPI: BIOS _OSI(Linux) query ignored >> [   0.476131] ACPI: DMI System Vendor: >> [   0.476133] ACPI: DMI Product Name: >> [   0.476135] ACPI: DMI Product Version: >> [   0.476136] ACPI: DMI Board Name: DG31PR >> [   0.476138] ACPI: DMI BIOS Vendor: Intel Corp. >> [   0.476140] ACPI: DMI BIOS Date: 06/12/2008 >> [   0.476141] ACPI: Please send DMI info above to >> linux-acpi@xxxxxxxxxxxxxxx >> [   0.476144] ACPI: If "acpi_osi=Linux" works better, please notify >> linux-acpi@xxxxxxxxxxxxxxx >> [   0.481613] ACPI: PCI Root Bridge [PCI0] (0000:00) >> [   0.481613] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold >> [   0.481613] pci 0000:00:01.0: PME# disabled >> [   0.481613] PCI: 0000:00:02.0 reg 10 32bit mmio: [feb00000, >> feb7ffff] >> [   0.481613] PCI: 0000:00:02.0 reg 14 io port: [d140, d147] >> [   0.481613] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, >> dfffffff] >> [   0.481613] PCI: 0000:00:02.0 reg 1c 32bit mmio: [fe900000, >> fe9fffff] >> [   0.481613] PCI: 0000:00:1b.0 reg 10 64bit mmio: [feb80000, >> feb83fff] >> [   0.481613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >> [   0.481613] pci 0000:00:1b.0: PME# disabled >> [   0.481613] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >> [   0.481613] pci 0000:00:1c.0: PME# disabled >> [   0.481613] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >> [   0.481613] pci 0000:00:1c.1: PME# disabled >> [   0.481613] PCI: 0000:00:1d.0 reg 20 io port: [d080, d09f] >> [   0.481613] PCI: 0000:00:1d.1 reg 20 io port: [d060, d07f] >> [   0.481613] PCI: 0000:00:1d.2 reg 20 io port: [d040, d05f] >> [   0.481613] PCI: 0000:00:1d.3 reg 20 io port: [d020, d03f] >> [   0.484052] PCI: 0000:00:1d.7 reg 10 32bit mmio: [feb84000, >> feb843ff] >> [   0.484097] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >> [   0.484101] pci 0000:00:1d.7: PME# disabled >> [   0.484211] pci 0000:00:1f.0: quirk: region 0400-047f claimed by >> ICH6 >> ACPI/GPIO/TCO >> [   0.484215] pci 0000:00:1f.0: quirk: region 0500-053f claimed by >> ICH6 GPIO >> [   0.484237] PCI: 0000:00:1f.1 reg 10 io port: [d130, d137] >> [   0.484243] PCI: 0000:00:1f.1 reg 14 io port: [d120, d123] >> [   0.484249] PCI: 0000:00:1f.1 reg 18 io port: [d110, d117] >> [   0.484256] PCI: 0000:00:1f.1 reg 1c io port: [d100, d103] >> [   0.484262] PCI: 0000:00:1f.1 reg 20 io port: [d0f0, d0ff] >> [   0.484299] PCI: 0000:00:1f.2 reg 10 io port: [d0e0, d0e7] >> [   0.484304] PCI: 0000:00:1f.2 reg 14 io port: [d0d0, d0d3] >> [   0.484310] PCI: 0000:00:1f.2 reg 18 io port: [d0c0, d0c7] >> [   0.484316] PCI: 0000:00:1f.2 reg 1c io port: [d0b0, d0b3] >> [   0.484321] PCI: 0000:00:1f.2 reg 20 io port: [d0a0, d0af] >> [   0.484341] pci 0000:00:1f.2: PME# supported from D3hot >> [   0.484345] pci 0000:00:1f.2: PME# disabled >> [   0.484385] PCI: 0000:00:1f.3 reg 20 io port: [d000, d01f] >> [   0.484543] PCI: 0000:03:00.0 reg 10 io port: [c000, c0ff] >> [   0.484565] PCI: 0000:03:00.0 reg 18 64bit mmio: [fea20000, >> fea20fff] >> [   0.484588] PCI: 0000:03:00.0 reg 30 32bit mmio: [fea00000, >> fea1ffff] >> [   0.484609] pci 0000:03:00.0: supports D1 >> [   0.484610] pci 0000:03:00.0: supports D2 >> [   0.484612] pci 0000:03:00.0: PME# supported from D1 D2 D3hot >> D3cold >> [   0.484618] pci 0000:03:00.0: PME# disabled >> [   0.484651] PCI: bridge 0000:00:1c.1 io port: [c000, cfff] >> [   0.484655] PCI: bridge 0000:00:1c.1 32bit mmio: [fea00000, >> feafffff] >> [   0.484699] PCI: 0000:04:06.0 reg 10 io port: [b000, b0ff] >> [   0.484743] pci 0000:04:06.0: PME# supported from D3hot D3cold >> [   0.484748] pci 0000:04:06.0: PME# disabled >> [   0.484781] pci 0000:00:1e.0: transparent bridge >> [   0.484785] PCI: bridge 0000:00:1e.0 io port: [b000, bfff] >> [   0.484807] bus 00 -> node 0 >> [   0.484814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> [   0.485011] ACPI: PCI Interrupt Routing Table >> [\_SB_.PCI0.P0P2._PRT] >> [   0.485154] ACPI: PCI Interrupt Routing Table >> [\_SB_.PCI0.PEX0._PRT] >> [   0.485252] ACPI: PCI Interrupt Routing Table >> [\_SB_.PCI0.PEX1._PRT] >> [   0.488210] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 >> 12 >> 14 15) >> [   0.488262] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 >> 12 >> 14 15) >> [   0.488383] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 >> 12 >> 14 15) >> [   0.488503] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 >> 12 >> 14 15) >> [   0.488622] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 >> 12 14 >> 15) *0 >> [   0.488740] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 >> 12 >> 14 15) >> [   0.488858] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 >> 12 14 >> 15) *0 >> [   0.488977] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 >> 12 >> 14 15) >> [   0.489035] Linux Plug and Play Support v0.97 (c) Adam Belay >> [   0.489035] pnp: PnP ACPI init >> [   0.489035] ACPI: bus type pnp registered >> [   0.492363] pnp: PnP ACPI: found 14 devices >> [   0.492365] ACPI: ACPI bus type pnp unregistered >> [   0.492369] PnPBIOS: Disabled by ACPI PNP >> [   0.492385] PCI: Using ACPI for IRQ routing >> [   0.500048] NET: Registered protocol family 8 >> [   0.500053] NET: Registered protocol family 20 >> [   0.500079] NetLabel: Initializing >> [   0.500079] NetLabel:  domain hash size = 128 >> [   0.500079] NetLabel:  protocols = UNLABELED CIPSOv4 >> [   0.500087] NetLabel:  unlabeled traffic allowed by default >> [   0.500096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >> [   0.500104] hpet0: 3 64-bit timers, 14318180 Hz >> [   0.501959] tracer: 772 pages allocated for 65536 entries of 48 >> bytes >> [   0.501963]   actual entries 65620 >> [   0.502055] AppArmor: AppArmor Filesystem Enabled >> [   0.502079] ACPI: RTC can wake from S4 >> [   0.504043] Switched to high resolution mode on CPU 0 >> [   0.504441] Switched to high resolution mode on CPU 1 >> [   0.508081] system 00:01: iomem range 0xfed14000-0xfed19fff has >> been >> reserved >> [   0.508086] system 00:01: iomem range 0xe0000000-0xe3ffffff has >> been >> reserved >> [   0.508098] system 00:02: ioport range 0x400-0x47f has been >> reserved >> [   0.508103] system 00:02: ioport range 0x1180-0x119f has been >> reserved >> [   0.508108] system 00:02: ioport range 0x500-0x53f has been >> reserved >> [   0.508113] system 00:02: iomem range 0xfec00000-0xfecfffff has >> been >> reserved >> [   0.508118] system 00:02: iomem range 0xfee00000-0xfee0ffff has >> been >> reserved >> [   0.508123] system 00:02: iomem range 0xfed1c000-0xfed1ffff could >> not >> be reserved >> [   0.508129] system 00:02: iomem range 0xffb00000-0xffcfffff could >> not >> be reserved >> [   0.508134] system 00:02: iomem range 0xfc800000-0xfc800fff has >> been >> reserved >> [   0.508139] system 00:02: iomem range 0xfed20000-0xfed7ffff has >> been >> reserved >> [   0.508144] system 00:02: iomem range 0xffe00000-0xffffffff could >> not >> be reserved >> [   0.508154] system 00:03: ioport range 0x290-0x29f has been >> reserved >> [   0.508174] system 00:0b: ioport range 0x4d0-0x4d1 has been >> reserved >> [   0.543273] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 >> [   0.543275] pci 0000:00:01.0:  IO window: disabled >> [   0.543279] pci 0000:00:01.0:  MEM window: disabled >> [   0.543282] pci 0000:00:01.0:  PREFETCH window: disabled >> [   0.543287] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 >> [   0.543289] pci 0000:00:1c.0:  IO window: disabled >> [   0.543293] pci 0000:00:1c.0:  MEM window: disabled >> [   0.543297] pci 0000:00:1c.0:  PREFETCH window: disabled >> [   0.543303] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 >> [   0.543306] pci 0000:00:1c.1:  IO window: 0xc000-0xcfff >> [   0.543311] pci 0000:00:1c.1:  MEM window: 0xfea00000-0xfeafffff >> [   0.543315] pci 0000:00:1c.1:  PREFETCH window: disabled >> [   0.543321] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 >> [   0.543324] pci 0000:00:1e.0:  IO window: 0xb000-0xbfff >> [   0.543328] pci 0000:00:1e.0:  MEM window: disabled >> [   0.543332] pci 0000:00:1e.0:  PREFETCH window: disabled >> [   0.543348] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> >> IRQ 16 >> [   0.543353] pci 0000:00:01.0: setting latency timer to 64 >> [   0.543360] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> >> IRQ 16 >> [   0.543364] pci 0000:00:1c.0: setting latency timer to 64 >> [   0.543372] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> >> IRQ 17 >> [   0.543376] pci 0000:00:1c.1: setting latency timer to 64 >> [   0.543382] pci 0000:00:1e.0: setting latency timer to 64 >> [   0.543386] bus: 00 index 0 io port: [0, ffff] >> [   0.543388] bus: 00 index 1 mmio: [0, ffffffff] >> [   0.543390] bus: 01 index 0 mmio: [0, 0] >> [   0.543391] bus: 01 index 1 mmio: [0, 0] >> [   0.543393] bus: 01 index 2 mmio: [0, 0] >> [   0.543395] bus: 01 index 3 mmio: [0, 0] >> [   0.543396] bus: 02 index 0 mmio: [0, 0] >> [   0.543398] bus: 02 index 1 mmio: [0, 0] >> [   0.543400] bus: 02 index 2 mmio: [0, 0] >> [   0.543402] bus: 02 index 3 mmio: [0, 0] >> [   0.543403] bus: 03 index 0 io port: [c000, cfff] >> [   0.543406] bus: 03 index 1 mmio: [fea00000, feafffff] >> [   0.543408] bus: 03 index 2 mmio: [0, 0] >> [   0.543409] bus: 03 index 3 mmio: [0, 0] >> [   0.543411] bus: 04 index 0 io port: [b000, bfff] >> [   0.543413] bus: 04 index 1 mmio: [0, 0] >> [   0.543415] bus: 04 index 2 mmio: [0, 0] >> [   0.543417] bus: 04 index 3 io port: [0, ffff] >> [   0.543419] bus: 04 index 4 mmio: [0, ffffffff] >> [   0.543428] NET: Registered protocol family 2 >> [   0.556124] IP route cache hash table entries: 32768 (order: 5, >> 131072 >> bytes) >> [   0.556363] TCP established hash table entries: 131072 (order: 8, >> 1048576 bytes) >> [   0.556812] TCP bind hash table entries: 65536 (order: 7, 524288 >> bytes) >> [   0.557139] TCP: Hash tables configured (established 131072 bind >> 65536) >> [   0.557143] TCP reno registered >> [   0.564198] NET: Registered protocol family 1 >> [   0.564311] checking if image is initramfs... it is >> [   1.186013] Freeing initrd memory: 7987k freed >> [   1.187100] audit: initializing netlink socket (disabled) >> [   1.187121] type=2000 audit(1238776160.184:1): initialized >> [   1.192462] highmem bounce pool size: 64 pages >> [   1.192468] HugeTLB registered 4 MB page size, pre-allocated 0 >> pages >> [   1.194613] VFS: Disk quotas dquot_6.5.1 >> [   1.194693] Dquot-cache hash table entries: 1024 (order 0, 4096 >> bytes) >> [   1.194790] msgmni has been set to 1743 >> [   1.194905] io scheduler noop registered >> [   1.194908] io scheduler anticipatory registered >> [   1.194910] io scheduler deadline registered >> [   1.194921] io scheduler cfq registered (default) >> [   1.194936] pci 0000:00:02.0: Boot video device >> [   1.195215] pcieport-driver 0000:00:01.0: setting latency timer to >> 64 >> [   1.195249] pcieport-driver 0000:00:01.0: found MSI capability >> [   1.195278] pci_express 0000:00:01.0:pcie00: allocate port service >> [   1.195319] pci_express 0000:00:01.0:pcie03: allocate port service >> [   1.195400] pcieport-driver 0000:00:1c.0: setting latency timer to >> 64 >> [   1.195432] pcieport-driver 0000:00:1c.0: found MSI capability >> [   1.195463] pci_express 0000:00:1c.0:pcie00: allocate port service >> [   1.195502] pci_express 0000:00:1c.0:pcie02: allocate port service >> [   1.195536] pci_express 0000:00:1c.0:pcie03: allocate port service >> [   1.195618] pcieport-driver 0000:00:1c.1: setting latency timer to >> 64 >> [   1.195649] pcieport-driver 0000:00:1c.1: found MSI capability >> [   1.195681] pci_express 0000:00:1c.1:pcie00: allocate port service >> [   1.195719] pci_express 0000:00:1c.1:pcie02: allocate port service >> [   1.195758] pci_express 0000:00:1c.1:pcie03: allocate port service >> [   1.196057] isapnp: Scanning for PnP cards... >> [   1.549697] isapnp: No Plug & Play device found >> [   1.580802] hpet_resources: 0xfed00000 is busy >> [   1.580861] Serial: 8250/16550 driver4 ports, IRQ sharing enabled >> [   1.580983] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> [   1.581690] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> [   1.583402] brd: module loaded >> [   1.583465] input: Macintosh mouse button emulation as >> /devices/virtual/input/input0 >> [   1.583587] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at >> 0x60,0x64 irq 1,12 >> [   1.586304] serio: i8042 KBD port at 0x60,0x64 irq 1 >> [   1.586310] serio: i8042 AUX port at 0x60,0x64 irq 12 >> [   1.592223] mice: PS/2 mouse device common for all mice >> [   1.592362] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 >> [   1.592386] rtc0: alarms up to one year, y3k, hpet irqs >> [   1.592507] EISA: Probing bus 0 at eisa.0 >> [   1.592534] EISA: Detected 0 cards. >> [   1.592537] cpuidle: using governor ladder >> [   1.592540] cpuidle: using governor menu >> [   1.593014] TCP cubic registered >> [   1.593041] Using IPI No-Shortcut mode >> [   1.593235] registered taskstats version 1 >> [   1.593351]  Magic number: 5:833:488 >> [   1.593460] rtc_cmos 00:09: setting system clock to 2009-04-03 >> 16:29:21 >> UTC (1238776161) >> [   1.593464] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >> [   1.593466] EDD information not available. >> [   1.593678] Freeing unused kernel memory: 424k freed >> [   1.593711] Write protecting the kernel text: 2576k >> [   1.593735] Write protecting the kernel read-only data: 936k >> [   1.628897] input: AT Translated Set 2 keyboard as >> /devices/platform/i8042/serio0/input/input1 >> [   1.704136] fuse init (API version 7.9) >> [   1.744213] ACPI: SSDT 7F3EBC10, 02CC (r1   AMI    IST  >>    1 MSFT >>  3000001) >> [   1.744616] processor ACPI0007:00: registered as cooling_device0 >> [   1.744777] processor ACPI0007:01: registered as cooling_device1 >> [   2.071672] usbcore: registered new interface driver usbfs >> [   2.071694] usbcore: registered new interface driver hub >> [   2.072135] usbcore: registered new device driver usb >> [   2.076629] USB Universal Host Controller Interface driver v3.0 >> [   2.076691] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) >> -> >> IRQ 23 >> [   2.076700] uhci_hcd 0000:00:1d.0: setting latency timer to 64 >> [   2.076704] uhci_hcd 0000:00:1d.0: UHCI Host Controller >> [   2.076746] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned >> bus >> number 1 >> [   2.076777] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080 >> [   2.076908] usb usb1: configuration #1 chosen from 1 choice >> [   2.076932] hub 1-0:1.0: USB hub found >> [   2.076939] hub 1-0:1.0: 2 ports detected >> [   2.130505] No dock devices found. >> [   2.177160] SCSI subsystem initialized >> [   2.191916] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) >> -> >> IRQ 19 >> [   2.191928] uhci_hcd 0000:00:1d.1: setting latency timer to 64 >> [   2.191932] uhci_hcd 0000:00:1d.1: UHCI Host Controller >> [   2.191965] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned >> bus >> number 2 >> [   2.191999] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060 >> [   2.192102] usb usb2: configuration #1 chosen from 1 choice >> [   2.192128] hub 2-0:1.0: USB hub found >> [   2.192136] hub 2-0:1.0: 2 ports detected >> [   2.206769] libata version 3.00 loaded. >> [   2.292778] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) >> -> >> IRQ 18 >> [   2.292789] uhci_hcd 0000:00:1d.2: setting latency timer to 64 >> [   2.292793] uhci_hcd 0000:00:1d.2: UHCI Host Controller >> [   2.292823] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned >> bus >> number 3 >> [   2.292857] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040 >> [   2.292969] usb usb3: configuration #1 chosen from 1 choice >> [   2.292997] hub 3-0:1.0: USB hub found >> [   2.293006] hub 3-0:1.0: 2 ports detected >> [   2.396777] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) >> -> >> IRQ 16 >> [   2.396786] uhci_hcd 0000:00:1d.3: setting latency timer to 64 >> [   2.396790] uhci_hcd 0000:00:1d.3: UHCI Host Controller >> [   2.396817] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned >> bus >> number 4 >> [   2.396849] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020 >> [   2.396958] usb usb4: configuration #1 chosen from 1 choice >> [   2.396988] hub 4-0:1.0: USB hub found >> [   2.396999] hub 4-0:1.0: 2 ports detected >> [   2.500443] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) >> -> >> IRQ 23 >> [   2.500458] ehci_hcd 0000:00:1d.7: setting latency timer to 64 >> [   2.500462] ehci_hcd 0000:00:1d.7: EHCI Host Controller >> [   2.500490] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned >> bus >> number 5 >> [   2.504406] ehci_hcd 0000:00:1d.7: debug port 1 >> [   2.504412] ehci_hcd 0000:00:1d.7: cache line size of 32 is not >> supported >> [   2.504420] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb84000 >> [   2.516523] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, >> driver >> 10 Dec 2004 >> [   2.516667] usb usb5: configuration #1 chosen from 1 choice >> [   2.516693] hub 5-0:1.0: USB hub found >> [   2.516701] hub 5-0:1.0: 8 ports detected >> [   2.724298] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, >> low) -> >> IRQ 18 >> [   2.724336] pata_acpi 0000:00:1f.1: setting latency timer to 64 >> [   2.724349] pata_acpi 0000:00:1f.1: PCI INT A disabled >> [   2.724371] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded >> [   2.724384] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> >> IRQ 17 >> [   2.724397] r8169 0000:03:00.0: setting latency timer to 64 >> [   2.724731] eth0: RTL8168b/8111b at 0xf8832000, 00:1c:c0:79:06:7f, >> XID >> 38500000 IRQ 220 >> [   2.726684] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, >> low) -> >> IRQ 19 >> [   2.726714] pata_acpi 0000:00:1f.2: setting latency timer to 64 >> [   2.726725] pata_acpi 0000:00:1f.2: PCI INT B disabled >> [   2.732129] ata_piix 0000:00:1f.1: version 2.12 >> [   2.732142] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) >> -> >> IRQ 18 >> [   2.732179] ata_piix 0000:00:1f.1: setting latency timer to 64 >> [   2.732234] scsi0 : ata_piix >> [   2.732317] scsi1 : ata_piix >> [   2.733616] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma >> 0xd0f0 >> irq 14 >> [   2.733619] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma >> 0xd0f8 >> irq 15 >> [   2.896779] ata1.00: ATA-5: QUANTUM FIREBALLlct15 20, A01.0F00, max >> UDMA/66 >> [   2.896786] ata1.00: 39876480 sectors, multi 16: LBA >> [   2.896805] ata1.00: limited to UDMA/33 due to 40-wire cable >> [   2.912684] ata1.00: configured for UDMA/33 >> [   2.912735] ata2: port disabled. ignoring. >> [   2.912857] scsi 0:0:0:0: Direct-Access   ATA    QUANTUM >> FIREBALL >> A01. PQ: 0 ANSI: 5 >> [   2.912948] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) >> -> >> IRQ 19 >> [   2.912953] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] >> [   2.912999] ata_piix 0000:00:1f.2: setting latency timer to 64 >> [   2.913056] scsi2 : ata_piix >> [   2.913118] scsi3 : ata_piix >> [   2.913158] ata3: SATA max UDMA/133 cmd 0xd0e0 ctl 0xd0d0 bmdma >> 0xd0a0 >> irq 19 >> [   2.913161] ata4: SATA max UDMA/133 cmd 0xd0c0 ctl 0xd0b0 bmdma >> 0xd0a8 >> irq 19 >> [   3.000035] usb 5-5: new high speed USB device using ehci_hcd and >> address 2 >> [   3.068187] ata3.01: NODEV after polling detection >> [   3.076212] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.00, max >> UDMA/100 >> [   3.092217] ata3.00: configured for UDMA/100 >> [   3.134756] usb 5-5: configuration #1 chosen from 1 choice >> [   3.248538] usb 5-6: new high speed USB device using ehci_hcd and >> address 3 >> [   3.259953] scsi 2:0:0:0: CD-ROM       HL-DT-ST DVD-RAM >> GH22NS30 >> 1.00 PQ: 0 ANSI: 5 >> [   3.269736] scsi 0:0:0:0: Attached scsi generic sg0 type 0 >> [   3.269776] scsi 2:0:0:0: Attached scsi generic sg1 type 5 >> [   3.283841] Driver 'sd' needs updating - please use bus_type >> methods >> [   3.283951] sd 0:0:0:0: [sda] 39876480 512-byte hardware sectors >> (20417 >> MB) >> [   3.283969] sd 0:0:0:0: [sda] Write Protect is off >> [   3.283971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [   3.284015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >> enabled, doesn't support DPO or FUA >> [   3.284092] sd 0:0:0:0: [sda] 39876480 512-byte hardware sectors >> (20417 >> MB) >> [   3.284109] sd 0:0:0:0: [sda] Write Protect is off >> [   3.284112] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [   3.284143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >> enabled, doesn't support DPO or FUA >> [   3.284148]  sda:<4>Driver 'sr' needs updating - please use >> bus_type >> methods >> [   3.302484]  sda1 sda2 < sda5 > >> [   3.334389] sd 0:0:0:0: [sda] Attached SCSI disk >> [   3.341024] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw >> xa/form2 >> cdda tray >> [   3.341029] Uniform CD-ROM driver Revision: 3.20 >> [   3.341127] sr 2:0:0:0: Attached scsi CD-ROM sr0 >> [   3.397885] usb 5-6: configuration #1 chosen from 1 choice >> [   3.398709] usbcore: registered new interface driver libusual >> [   3.404570] Initializing USB Mass Storage driver... >> [   3.404645] scsi4 : SCSI emulation for USB Mass Storage devices >> [   3.404740] usb-storage: device found at 2 >> [   3.404742] usb-storage: waiting for device to settle before >> scanning >> [   3.404770] scsi5 : SCSI emulation for USB Mass Storage devices >> [   3.404841] usbcore: registered new interface driver usb-storage >> [   3.404844] USB Mass Storage support registered. >> [   3.404959] usb-storage: device found at 3 >> [   3.404960] usb-storage: waiting for device to settle before >> scanning >> [   3.821212] PM: Starting manual resume from disk >> [   3.821216] PM: Resume from partition 8:5 >> [   3.821218] PM: Checking hibernation image. >> [   3.821677] PM: Resume from disk failed. >> [   3.867887] EXT3-fs: INFO: recovery required on readonly >> filesystem. >> [   3.867891] EXT3-fs: write access will be enabled during recovery. >> [   8.404307] usb-storage: device scan complete >> [   8.404906] scsi 4:0:0:0: Direct-Access   Kingston DT 101 II >> 1.00 PQ: 0 ANSI: 2 >> [   8.406713] sd 4:0:0:0: [sdb] 7872512 512-byte hardware sectors >> (4031 MB) >> [   8.407250] sd 4:0:0:0: [sdb] Write Protect is off >> [   8.407253] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 >> [   8.407256] sd 4:0:0:0: [sdb] Assuming drive cache: write through >> [   8.409259] sd 4:0:0:0: [sdb] 7872512 512-byte hardware sectors >> (4031 MB) >> [   8.409882] sd 4:0:0:0: [sdb] Write Protect is off >> [   8.409885] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 >> [   8.409888] sd 4:0:0:0: [sdb] Assuming drive cache: write through >> [   8.409893]  sdb: sdb1 >> [   8.410625] sd 4:0:0:0: [sdb] Attached SCSI removable disk >> [   8.410729] sd 4:0:0:0: Attached scsi generic sg2 type 0 >> [   9.404177] usb-storage: device scan complete >> [   9.954023] kjournald starting.  Commit interval 5 seconds >> [   9.954037] EXT3-fs: recovery complete. >> [  10.214155] EXT3-fs: mounted filesystem with ordered data mode. >> [  15.016042] usb 5-6: reset high speed USB device using ehci_hcd and >> address 3 >> [  15.153691] scsi 5:0:0:0: Direct-Access   Kingston DataTraveler >> 2.0 >> PMAP PQ: 0 ANSI: 0 CCS >> [  15.154661] sd 5:0:0:0: [sdc] 3950592 512-byte hardware sectors >> (2023 MB) >> [  15.155161] sd 5:0:0:0: [sdc] Write Protect is off >> [  15.155164] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00 >> [  15.155166] sd 5:0:0:0: [sdc] Assuming drive cache: write through >> [  15.156662] sd 5:0:0:0: [sdc] 3950592 512-byte hardware sectors >> (2023 MB) >> [  15.157156] sd 5:0:0:0: [sdc] Write Protect is off >> [  15.157160] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00 >> [  15.157164] sd 5:0:0:0: [sdc] Assuming drive cache: write through >> [  15.157169]  sdc: sdc1 >> [  15.157750] sd 5:0:0:0: [sdc] Attached SCSI removable disk >> [  15.157852] sd 5:0:0:0: Attached scsi generic sg3 type 0 >> [  19.130048] udevd version 124 started >> [  19.587862] intel_rng: Firmware space is locked read-only. If you >> can't or >> [  19.587864] intel_rng: don't want to disable this in firmware setup, >> and if >> [  19.587865] intel_rng: you are certain that your system has a >> functional >> [  19.587866] intel_rng: RNG, try using the 'no_fwh_detect' option. >> [  19.660227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >> [  19.764710] shpchp: Standard Hot Plug PCI Controller Driver version: >> 0.4 >> [  19.832563] Linux agpgart interface v0.103 >> [  20.039625] input: Power Button (FF) as >> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 >> [  20.061778] input: PC Speaker as >> /devices/platform/pcspkr/input/input3 >> [  20.068080] ACPI: Power Button (FF) [PWRF] >> [  20.068201] input: Sleep Button (CM) as >> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 >> [  20.104588] iTCO_vendor_support: vendor-support=0 >> [  20.118095] agpgart-intel 0000:00:00.0: Intel G33 Chipset >> [  20.118375] agpgart-intel 0000:00:00.0: detected 7164K stolen memory >> [  20.124898] ACPI: Sleep Button (CM) [SLPB] >> [  20.124982] input: Power Button (CM) as >> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 >> [  20.133574] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ >> 0xd0000000 >> [  20.160549] ACPI: Power Button (CM) [PWRB] >> [  20.210682] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 >> (30-Apr-2008) >> [  20.210765] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, >> TCOBASE=0x0460) >> [  20.210862] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >> [  20.252237] ACPI Exception (video-1630): AE_NOT_FOUND, Evaluating >> _DOD >> [20080609] >> [  20.252300] input: Video Bus as >> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input6 >> [  20.276275] ACPI: Video Device [GFX0] (multi-head: no  rom: yes >>  post: no) >> [  20.690363] input: ImPS/2 Generic Wheel Mouse as >> /devices/platform/i8042/serio1/input/input7 >> [  21.141937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) >> -> >> IRQ 16 >> [  21.141955] HDA Intel 0000:00:1b.0: setting latency timer to 64 >> [  21.348517] hda_codec: Unknown model for ALC883, trying auto-probe >> from >> BIOS... >> [  22.098388] lp: driver loaded but no devices found >> [  22.259701] Adding 875500k swap on /dev/sda5.  Priority:-1 >> extents:1 >> across:875500k >> [  22.818819] EXT3 FS on sda1, internal journal >> [  23.849591] type=1505 audit(1238776183.896:2): >> operation="profile_load" >> name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4215 >> [  23.999850] type=1505 audit(1238776184.044:3): >> operation="profile_load" >> name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4220 >> [  24.000046] type=1505 audit(1238776184.048:4): >> operation="profile_load" >> name="/usr/sbin/cupsd" name2="default" pid=4220 >> [  24.117708] ip_tables: (C) 2000-2006 Netfilter Core Team >> [  24.780983] hcfpciengine: module license 'see LICENSE file >> distributed >> with driver' taints kernel. >> [  25.293898] usbcore: registered new interface driver hsfusbcd2 >> [  25.418170] ACPI: WMI: Mapper loaded >> [  26.361819] warning: `avahi-daemon' uses 32-bit capabilities (legacy >> support in use) >> [  26.431982] apm: BIOS not found. >> [  26.620207] ppdev: user-space parallel port driver >> [  28.310819] Bluetooth: Core ver 2.13 >> [  28.312367] NET: Registered protocol family 31 >> [  28.312375] Bluetooth: HCI device and connection manager initialized >> [  28.312380] Bluetooth: HCI socket layer initialized >> [  28.332567] Bluetooth: L2CAP ver 2.11 >> [  28.332579] Bluetooth: L2CAP socket layer initialized >> [  28.347467] Bluetooth: SCO (Voice Link) ver 0.6 >> [  28.347479] Bluetooth: SCO socket layer initialized >> [  28.366996] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >> [  28.367005] Bluetooth: BNEP filters: protocol multicast >> [  28.422513] Bridge firewalling registered >> [  28.423607] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM >> feature. >> [  28.473916] Bluetooth: RFCOMM socket layer initialized >> [  28.473938] Bluetooth: RFCOMM TTY layer initialized >> [  28.473942] Bluetooth: RFCOMM ver 1.10 >> [  31.633835] [drm] Initialized drm 1.1.0 20060810 >> [  31.670563] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> >> IRQ 16 >> [  31.670578] pci 0000:00:02.0: setting latency timer to 64 >> [  31.672898] [drm] Initialized i915 1.6.0 20060119 on minor 0 >> [  32.165298] sound disabled >> [  32.165340] This Intel(R) 537EP Modem driver won't install on AC97 >> modem card, please download intel537EA driver to check if it supports >> your >> modem >> [  32.228721] set status page addr 0x00033000 >> [  32.640727] r8169: eth0: link up >> [  32.640742] r8169: eth0: link up >> [  32.932356] NET: Registered protocol family 17 >> [  34.439657] sound disabled >> [  34.439704] This Intel(R) 537EP Modem driver won't install on AC97 >> modem card, please download intel537EA driver to check if it supports >> your >> modem >> [  118.837873] canberra-gtk-pl[5891]: segfault at 69609a40 ip b720184d >> sp >> b6f9afa0 error 6 in libpulse.so.0.4.1[b71c2000+4e000] >> [  191.257553] type=1503 audit(1238776351.304:5): >> operation="inode_permission" requested_mask="r::" denied_mask="r::" >> fsuid=7 name="/proc/6061/net/" pid=6061 profile="/usr/sbin/cupsd" >> [  192.444303] type=1503 audit(1238776352.488:6): >> operation="inode_permission" requested_mask="r::" denied_mask="r::" >> fsuid=7 name="/proc/6065/net/" pid=6065 profile="/usr/sbin/cupsd" >> [  192.544710] NET: Registered protocol family 10 >> [  192.547429] lo: Disabled Privacy Extensions >> [  192.549091] type=1503 audit(1238776352.596:7): >> operation="socket_create" family="ax25" sock_type="dgram" protocol=0 >> pid=6065 profile="/usr/sbin/cupsd" >> [  192.549106] type=1503 audit(1238776352.596:8): >> operation="socket_create" family="netrom" sock_type="seqpacket" >> protocol=0 >> pid=6065 profile="/usr/sbin/cupsd" >> [  192.549117] type=1503 audit(1238776352.596:9): >> operation="socket_create" family="rose" sock_type="dgram" protocol=0 >> pid=6065 profile="/usr/sbin/cupsd" >> [  192.549127] type=1503 audit(1238776352.596:10): >> operation="socket_create" family="ipx" sock_type="dgram" protocol=0 >> pid=6065 profile="/usr/sbin/cupsd" >> [  192.549137] type=1503 audit(1238776352.596:11): >> operation="socket_create" family="appletalk" sock_type="dgram" >> protocol=0 >> pid=6065 profile="/usr/sbin/cupsd" >> [  192.549147] type=1503 audit(1238776352.596:12): >> operation="socket_create" family="econet" sock_type="dgram" protocol=0 >> pid=6065 profile="/usr/sbin/cupsd" >> [  192.549158] type=1503 audit(1238776352.596:13): >> operation="socket_create" family="ash" sock_type="dgram" protocol=0 >> pid=6065 profile="/usr/sbin/cupsd" >> >> Module          Size  Used by >> ipv6          263972  14 >> nls_iso8859_1      12032  2 >> nls_cp437        13696  2 >> vfat          18816  2 >> fat           57376  1 vfat >> af_packet        25728  2 >> i915          38144  2 >> binfmt_misc       16904  1 >> drm           86056  3 i915 >> rfcomm         44432  0 >> bridge         56980  0 >> stp           10628  1 bridge >> bnep          20480  2 >> sco           18308  2 >> l2cap          30464  6 rfcomm,bnep >> bluetooth        61924  6 rfcomm,bnep,sco,l2cap >> ppdev          15620  0 >> acpi_cpufreq      15500  0 >> cpufreq_userspace    11396  0 >> cpufreq_conservative   14600  0 >> cpufreq_powersave    9856  0 >> cpufreq_ondemand    14988  2 >> cpufreq_stats      13188  0 >> freq_table       12672  3 >> acpi_cpufreq,cpufreq_ondemand,cpufreq_stats >> pci_slot        12552  0 >> container        11520  0 >> wmi           14504  0 >> sbs           19464  0 >> sbshc          13440  1 sbs >> hsfusbcd2        69312  0 >> hsfmc97sis       71488  0 >> hsfmc97ati       70440  0 >> hsfmc97ali       77112  0 >> hsfmc97via       73016  0 >> hsfmc97ich       74812  0 >> hsfpcibasic3      113032  0 >> hsfpcibasic2      71344  0 >> hsfserial        28964  8 >> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2 >> hsfengine       1308096  9 >> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial >> hsfosspec       106348  10 >> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial,hsfengine >> hsfsoar        101720  7 >> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2 >> hcfpcihw        16896  0 >> hcfpciserial      28836  1 hcfpcihw >> hcfpciengine      949200  2 hcfpcihw,hcfpciserial >> hcfpciosspec      73772  2 hcfpciserial,hcfpciengine >> battery         18436  0 >> iptable_filter     10752  0 >> ip_tables        19600  1 iptable_filter >> x_tables        22916  1 ip_tables >> ac           12292  0 >> parport_pc       39204  0 >> lp           17156  0 >> parport         42604  3 ppdev,parport_pc,lp >> snd_hda_intel      25240  3 >> snd_hda_codec     261252  1 snd_hda_intel >> snd_pcm_oss       46848  0 >> snd_mixer_oss      22784  1 snd_pcm_oss >> snd_pcm         83204  3 >> snd_hda_intel,snd_hda_codec,snd_pcm_oss >> snd_seq_dummy      10884  0 >> snd_seq_oss       38528  0 >> snd_seq_midi      14336  0 >> snd_rawmidi       29824  1 snd_seq_midi >> snd_seq_midi_event   15232  2 snd_seq_oss,snd_seq_midi >> snd_seq         57776  6 >> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >> snd_timer        29960  2 snd_pcm,snd_seq >> snd_seq_device     15116  5 >> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >> evdev          17696  9 >> snd           63268  16 >> snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >> psmouse         45200  0 >> video          25104  0 >> output         11008  1 video >> iTCO_wdt        18596  0 >> serio_raw        13444  0 >> intel_agp        33724  1 >> iTCO_vendor_support   11652  1 iTCO_wdt >> pcspkr         10624  0 >> button         14224  0 >> soundcore        15328  1 snd >> snd_page_alloc     16136  2 snd_hda_intel,snd_pcm >> agpgart         42184  3 drm,intel_agp >> shpchp         37908  0 >> pci_hotplug       35236  1 shpchp >> ext3          133256  1 >> jbd           55444  1 ext3 >> mbcache         16004  1 ext3 >> usb_storage       81728  2 >> sr_mod         22212  0 >> cdrom          43168  1 sr_mod >> sd_mod         42264  7 >> crc_t10dif        9984  1 sd_mod >> sg           39732  0 >> ata_generic       12932  0 >> libusual        27156  1 usb_storage >> ata_piix        24580  2 >> pata_acpi        12160  0 >> libata         177312  3 ata_generic,ata_piix,pata_acpi >> scsi_mod        155212  5 >> usb_storage,sr_mod,sd_mod,sg,libata >> dock          16656  1 libata >> ehci_hcd        43276  0 >> r8169          35972  0 >> uhci_hcd        30736  0 >> usbcore        148848  7 >> hsfusbcd2,hsfosspec,usb_storage,libusual,ehci_hcd,uhci_hcd >> thermal         23708  0 >> processor        42156  2 acpi_cpufreq,thermal >> fan           12548  0 >> fbcon          47648  0 >> tileblit        10880  1 fbcon >> font          16512  1 fbcon >> bitblit         13824  1 fbcon >> softcursor        9984  1 bitblit >> fuse          60828  3 >> >> >> I also would have some US Robotics Modems to put into the computer if >> these are easier to install. >> I hope this mail is how it shoul be and I would appreciate your help in >> this. >> >> Best regards >> Timo >> >> >> > >
