TImo, There seems to be a functional hsdmodem package installed. Try: $ sudo wvdialconf which should detect the modem. If so edit in your personal information with: $ sudo gedit /etc/wvdial.conf removing the symbols ; < > $ man wvdial.conf will relate details. Then you should be able to dailout with: $ sudo wvdial MarvS On Mon, Apr 6, 2009 at 10:36 AM, Timo Kosiol <timo@xxxxxxxxx> wrote: > Hello, > I would like to get your help to install two modems on my Ubuntu 8.10. > I tried a lot the last days, but i didn't found a driver / documentation > to get my 2 modems at the pci-slots to work. > Here the text from ScanModem. > > ModemData.txt: > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.27-7-generic > With this Subject Line cogent experts will be alerted, and useful case > names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet > Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu > 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 > scanModem update of: 2009_02_21 > The modem symbolic link is /dev/modem -> ttySHSF0 > There are no blacklisted modem drivers in /etc/modprobe* files > Potentially useful modem drivers now loaded are: > hsfserial snd_hda_intel > > Attached USB devices are: > ID 0951:1607 Kingston Technology Data Traveler 2.0 > ID 0951:1613 Kingston Technology > If a cellphone is not detected, see > http://ubuntuforums.org/archive/index.php/t-878554.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > For candidate card in slot 04:06.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 04:06.0 11c1:0620 11c1:0620 Communication controller: Agere Systems > Device 0620 > > Modem interrupt assignment and sharing: > --- Bootup diagnostics for card in PCI slot 04:06.0 ---- > [ 0.484699] PCI: 0000:04:06.0 reg 10 io port: [b000, b0ff] > [ 0.484743] pci 0000:04:06.0: PME# supported from D3hot D3cold > [ 0.484748] pci 0000:04:06.0: PME# disabled > > The PCI slot 04:06.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > For candidate card in slot 00:1b.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 8086:d608 Audio device: Intel Corporation 82801G > > Modem interrupt assignment and sharing: > 16: 20354 69 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel, > i915@pci:0000:00:02.0 > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 0.481613] PCI: 0000:00:1b.0 reg 10 64bit mmio: [feb80000, feb83fff] > [ 0.481613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.481613] pci 0000:00:1b.0: PME# disabled > [ 21.141937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 21.141955] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.17 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-02: ALC883 Analog : ALC883 Analog : capture 2 > 00-01: ALC883 Digital : ALC883 Digital : playback 1 > 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xfeb80000 irq 16 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.27-7-generic/updates/snd-hda-intel.ko > UNEXPECTED HDA diagnostic outcome. > === Finished firmware and bootup diagnostics, next deducing cogent > software. === > > Predictive diagnostics for card in bus 04:06.0: > Modem chipset detected on > NAME="Communication controller: Agere Systems Device 0620" > CLASS=0780 > PCIDEV=11c1:0620 > SUBSYS=11c1:0620 > IRQ=11 > IDENT=agrsm > > For candidate modem in: 04:06.0 > 0780 Communication controller: Agere Systems Device 0620 > Primary device ID: 11c1:0620 > Support type needed or chipset: agrsm > > > ----------------end Softmodem section -------------- > > Writing DOCs/Intel.txt > > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset not detected on > NAME="Audio device: Intel Corporation 82801G " > CLASS=0403 > PCIDEV=8086:27d8 > SUBSYS=8086:d608 > IRQ=16 > HDA=8086:27d8 > SOFT=8086:27d8.HDA > > > High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, > and many are supported by the ALSA audio+modem driver snd-hda-intel > A modem was not detected on HDA card 8086:27d8. > If another modem card is present, then most likely 8086:27d8 does not > host a modem. > If another modem card has not been detected, then possibilities are: > 1) A Conexant modem chip is present on 8086:27d8, as Conexant chips > are frequently not detectable by ALSA diagnostics > 2) The modem may be of the older non-PCI Controller Chipset (hardware) type. > Try detection with Root permission: > sudo wvdialconf /etc/wvdial.conf > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801G > Primary device ID: 8086:27d8 > Subsystem PCI_id 8086:d608 > Softmodem codec or chipset from diagnostics: > from Archives: > > > > Support type needed or chipset: > > Support can likely be achieved through two mutually exclusive alternatives: > 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt > The following ALSA alternative CANNOT work with Conexant modems. > > 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for > details, and > to test get the package SLMODEMD.gcc4.3.tar.gz from: > http://linmodems.technion.ac.il/packages/smartlink/ > > ----------------end Softmodem section -------------- > Writing DOCs/Smartlink.txt > ============ end Smartlink section ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.2 > and the compiler used in kernel assembly: 4.3.2 > > The patch utility is needed and is needed for compiling ALSA drivers, and > possibly others. > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder /lib/modules/2.6.27-7-generic/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed in > /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 273064 2008-10-15 20:51 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: lrwxrwxrwx 1 root root 8 2009-04-03 > 11:29 /dev/modem -> ttySHSF0 > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/00-hcfpci.rules:KERNEL=="ttySHCF0", SYMLINK="modem" > /etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem" > Within /etc/modprobe.conf files: > /etc/modprobe.d/hcfpci.conflicts:install snd-via82xx-modem /bin/true # > temporarily disabled by hcfpci - conflicts with hsfmc97via > /etc/modprobe.d/hcfpci.conflicts:install snd-atiixp-modem /bin/true # > temporarily disabled by hcfpci - conflicts with hsfmc97ati > /etc/modprobe.d/hsf.conflicts:install snd-via82xx-modem /bin/true # > temporarily disabled by hsf - conflicts with hsfmc97via > /etc/modprobe.d/hsf.conflicts:install snd-atiixp-modem /bin/true # > temporarily disabled by hsf - conflicts with hsfmc97ati > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > /etc/modprobe.d/hcfpci:alias /dev/modem /dev/ttySHCF > /etc/modprobe.d/hsf:alias /dev/modem /dev/ttySHSF > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > /etc/modules.conf:alias /dev/modem /dev/ttySHSF > /etc/modules.conf:alias /dev/modem /dev/ttySHCF > --------- end modem support lines -------- > > Dmesg.txt: > CPU0 CPU1 > 0: 117 1 IO-APIC-edge timer > 1: 22 60 IO-APIC-edge i8042 > 4: 1 2 IO-APIC-edge > 8: 27 30 IO-APIC-edge rtc0 > 9: 0 0 IO-APIC-fasteoi acpi > 12: 5877 7021 IO-APIC-edge i8042 > 14: 3761 5157 IO-APIC-edge ata_piix > 15: 0 0 IO-APIC-edge ata_piix > 16: 20360 69 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel, > i915@pci:0000:00:02.0 > 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 > 19: 857 876 IO-APIC-fasteoi uhci_hcd:usb2, ata_piix > 23: 1214 1544 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5 > 220: 82 186 PCI-MSI-edge eth0 > NMI: 0 0 Non-maskable interrupts > LOC: 13453 13867 Local timer interrupts > RES: 2480 2804 Rescheduling interrupts > CAL: 7847 30667 function call interrupts > TLB: 973 939 TLB shootdowns > SPU: 0 0 Spurious interrupts > ERR: 0 > MIS: 0 > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc > version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC > 2008 (Ubuntu 2.6.27-7.14-generic) > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f23a000 (usable) > [ 0.000000] BIOS-e820: 000000007f23a000 - 000000007f27d000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007f27d000 - 000000007f355000 (reserved) > [ 0.000000] BIOS-e820: 000000007f355000 - 000000007f365000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007f365000 - 000000007f3e1000 (reserved) > [ 0.000000] BIOS-e820: 000000007f3e1000 - 000000007f3e7000 (ACPI data) > [ 0.000000] BIOS-e820: 000000007f3e7000 - 000000007f3e8000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007f3e8000 - 000000007f3ea000 (ACPI data) > [ 0.000000] BIOS-e820: 000000007f3ea000 - 000000007f3ec000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007f3ec000 - 000000007f3ed000 (reserved) > [ 0.000000] BIOS-e820: 000000007f3ed000 - 000000007f3f1000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007f3f1000 - 000000007f400000 (reserved) > [ 0.000000] BIOS-e820: 000000007f400000 - 000000007f600000 (usable) > [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000 > [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 > [ 0.000000] RAMDISK: 37823000 - 37fefee1 > [ 0.000000] DMI 2.4 present. > [ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL) > [ 0.000000] ACPI: XSDT 7F3E8F10, 0044 (r1 INTEL DG31PR 6222004 MSFT > 10013) > [ 0.000000] ACPI: FACP 7F3E6D90, 00F4 (r4 INTEL DG31PR 6222004 MSFT > 10013) > [ 0.000000] ACPI: DSDT 7F3E1010, 4A8F (r1 INTEL DG31PR 0 INTL > 20051117) > [ 0.000000] ACPI: FACS 7F3E7F40, 0040 > [ 0.000000] ACPI: APIC 7F3E6F10, 006C (r2 INTEL DG31PR 6222004 MSFT > 10013) > [ 0.000000] ACPI: HPET 7F3EFD10, 0038 (r1 INTEL ICH7HPET 6222004 AMI. > 1) > [ 0.000000] ACPI: MCFG 7F3EFC10, 003C (r1 INTEL DG31PR 6222004 MSFT > 97) > [ 0.000000] 1142MB HIGHMEM available. > [ 0.000000] 896MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 38000000 > [ 0.000000] low ram: 00000000 - 38000000 > [ 0.000000] bootmap 00008000 - 0000f000 > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> > [0000001000 - 0000002000] > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> > [0000006000 - 0000007000] > [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> > [0000100000 - 00005c0a20] > [ 0.000000] #4 [0037823000 - 0037fefee1] RAMDISK ==> > [0037823000 - 0037fefee1] > [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> > [00005c1000 - 00005c4000] > [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> > [000009fc00 - 0000100000] > [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> > [0000007000 - 0000008000] > [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> > [0000008000 - 000000f000] > [ 0.000000] found SMP MP-table at [c00fd420] 000fd420 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x00038000 > [ 0.000000] HighMem 0x00038000 -> 0x0007f600 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0007f23a > [ 0.000000] 0: 0x0007f400 -> 0x0007f600 > [ 0.000000] On node 0 totalpages: 521177 > [ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map > c1000000 > [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 > [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 289328 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) > [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs > [ 0.000000] mapped APIC to ffffb000 (fee00000) > [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 80000000 (gap: > 7f600000:7f71c000) > [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data > [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 516591 > [ 0.000000] Kernel command line: > root=UUID=c9892d2d-3f6f-4b50-9580-f36a7635e015 ro quiet splash > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. > [ 0.000000] TSC: using PMTIMER calibration value > [ 0.000000] Detected 2199.948 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes) > [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.004000] Memory: 2051644k/2086912k available (2572k kernel code, > 32268k reserved, 1160k data, 424k init, 1167592k highmem) > [ 0.004000] virtual kernel memory layout: > [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) > [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) > [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) > [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) > [ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB) > [ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB) > [ 0.004000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated > [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, > CPUs=4, Nodes=1 > [ 0.004000] hpet clockevent registered > [ 0.004000] Calibrating delay loop (skipped), value calculated using > timer frequency.. 4399.89 BogoMIPS (lpj=8799792) > [ 0.004000] Security Framework initialized > [ 0.004000] SELinux: Disabled at boot. > [ 0.004000] AppArmor: AppArmor initialized > [ 0.004000] Mount-cache hash table entries: 512 > [ 0.004000] Initializing cgroup subsys ns > [ 0.004000] Initializing cgroup subsys cpuacct > [ 0.004000] Initializing cgroup subsys memory > [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.004000] CPU: L2 cache: 1024K > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 0 > [ 0.004000] using mwait in idle threads. > [ 0.004000] Checking 'hlt' instruction... OK. > [ 0.017783] ACPI: Core revision 20080609 > [ 0.019469] ACPI: Checking initramfs for custom DSDT > [ 0.323343] ENABLING IO-APIC IRQs > [ 0.323514] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.363212] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz > stepping 0d > [ 0.364022] Booting processor 1/1 ip 6000 > [ 0.004000] Initializing CPU#1 > [ 0.004000] Calibrating delay using timer specific routine.. 4399.88 > BogoMIPS (lpj=8799764) > [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.004000] CPU: L2 cache: 1024K > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 1 > [ 0.448385] CPU1: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz > stepping 0d > [ 0.448400] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.452048] Brought up 2 CPUs > [ 0.452051] Total of 2 processors activated (8799.77 BogoMIPS). > [ 0.452073] CPU0 attaching sched-domain: > [ 0.452076] domain 0: span 0-1 level MC > [ 0.452078] groups: 0 1 > [ 0.452084] CPU1 attaching sched-domain: > [ 0.452086] domain 0: span 0-1 level MC > [ 0.452088] groups: 1 0 > [ 0.452158] net_namespace: 840 bytes > [ 0.452158] Booting paravirtualized kernel on bare hardware > [ 0.452262] Time: 16:29:20 Date: 04/03/09 > [ 0.452289] NET: Registered protocol family 16 > [ 0.452308] EISA bus registered > [ 0.452308] ACPI: bus type pci registered > [ 0.452308] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 > - 64 > [ 0.452308] PCI: Not using MMCONFIG. > [ 0.465188] PCI: Using configuration type 1 for base access > [ 0.465209] ACPI: EC: Look up EC in DSDT > [ 0.473060] ACPI: Interpreter enabled > [ 0.473064] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.473080] ACPI: Using IOAPIC for interrupt routing > [ 0.473133] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 > - 64 > [ 0.475863] PCI: MCFG area at e0000000 reserved in ACPI motherboard > resources > [ 0.475866] PCI: updated MCFG configuration 0: base e0000000 segment 0 > buses 0 - 31 > [ 0.475868] PCI: Using MMCONFIG for extended config space > [ 0.476129] ACPI: BIOS _OSI(Linux) query ignored > [ 0.476131] ACPI: DMI System Vendor: > [ 0.476133] ACPI: DMI Product Name: > [ 0.476135] ACPI: DMI Product Version: > [ 0.476136] ACPI: DMI Board Name: DG31PR > [ 0.476138] ACPI: DMI BIOS Vendor: Intel Corp. > [ 0.476140] ACPI: DMI BIOS Date: 06/12/2008 > [ 0.476141] ACPI: Please send DMI info above to linux-acpi@xxxxxxxxxxxxxxx > [ 0.476144] ACPI: If "acpi_osi=Linux" works better, please notify > linux-acpi@xxxxxxxxxxxxxxx > [ 0.481613] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.481613] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 0.481613] pci 0000:00:01.0: PME# disabled > [ 0.481613] PCI: 0000:00:02.0 reg 10 32bit mmio: [feb00000, feb7ffff] > [ 0.481613] PCI: 0000:00:02.0 reg 14 io port: [d140, d147] > [ 0.481613] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff] > [ 0.481613] PCI: 0000:00:02.0 reg 1c 32bit mmio: [fe900000, fe9fffff] > [ 0.481613] PCI: 0000:00:1b.0 reg 10 64bit mmio: [feb80000, feb83fff] > [ 0.481613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.481613] pci 0000:00:1b.0: PME# disabled > [ 0.481613] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.481613] pci 0000:00:1c.0: PME# disabled > [ 0.481613] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.481613] pci 0000:00:1c.1: PME# disabled > [ 0.481613] PCI: 0000:00:1d.0 reg 20 io port: [d080, d09f] > [ 0.481613] PCI: 0000:00:1d.1 reg 20 io port: [d060, d07f] > [ 0.481613] PCI: 0000:00:1d.2 reg 20 io port: [d040, d05f] > [ 0.481613] PCI: 0000:00:1d.3 reg 20 io port: [d020, d03f] > [ 0.484052] PCI: 0000:00:1d.7 reg 10 32bit mmio: [feb84000, feb843ff] > [ 0.484097] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.484101] pci 0000:00:1d.7: PME# disabled > [ 0.484211] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 > ACPI/GPIO/TCO > [ 0.484215] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO > [ 0.484237] PCI: 0000:00:1f.1 reg 10 io port: [d130, d137] > [ 0.484243] PCI: 0000:00:1f.1 reg 14 io port: [d120, d123] > [ 0.484249] PCI: 0000:00:1f.1 reg 18 io port: [d110, d117] > [ 0.484256] PCI: 0000:00:1f.1 reg 1c io port: [d100, d103] > [ 0.484262] PCI: 0000:00:1f.1 reg 20 io port: [d0f0, d0ff] > [ 0.484299] PCI: 0000:00:1f.2 reg 10 io port: [d0e0, d0e7] > [ 0.484304] PCI: 0000:00:1f.2 reg 14 io port: [d0d0, d0d3] > [ 0.484310] PCI: 0000:00:1f.2 reg 18 io port: [d0c0, d0c7] > [ 0.484316] PCI: 0000:00:1f.2 reg 1c io port: [d0b0, d0b3] > [ 0.484321] PCI: 0000:00:1f.2 reg 20 io port: [d0a0, d0af] > [ 0.484341] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.484345] pci 0000:00:1f.2: PME# disabled > [ 0.484385] PCI: 0000:00:1f.3 reg 20 io port: [d000, d01f] > [ 0.484543] PCI: 0000:03:00.0 reg 10 io port: [c000, c0ff] > [ 0.484565] PCI: 0000:03:00.0 reg 18 64bit mmio: [fea20000, fea20fff] > [ 0.484588] PCI: 0000:03:00.0 reg 30 32bit mmio: [fea00000, fea1ffff] > [ 0.484609] pci 0000:03:00.0: supports D1 > [ 0.484610] pci 0000:03:00.0: supports D2 > [ 0.484612] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold > [ 0.484618] pci 0000:03:00.0: PME# disabled > [ 0.484651] PCI: bridge 0000:00:1c.1 io port: [c000, cfff] > [ 0.484655] PCI: bridge 0000:00:1c.1 32bit mmio: [fea00000, feafffff] > [ 0.484699] PCI: 0000:04:06.0 reg 10 io port: [b000, b0ff] > [ 0.484743] pci 0000:04:06.0: PME# supported from D3hot D3cold > [ 0.484748] pci 0000:04:06.0: PME# disabled > [ 0.484781] pci 0000:00:1e.0: transparent bridge > [ 0.484785] PCI: bridge 0000:00:1e.0 io port: [b000, bfff] > [ 0.484807] bus 00 -> node 0 > [ 0.484814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.485011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] > [ 0.485154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > [ 0.485252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] > [ 0.488210] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 > 14 15) > [ 0.488262] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 > 14 15) > [ 0.488383] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 > 14 15) > [ 0.488503] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 > 14 15) > [ 0.488622] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0 > [ 0.488740] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 > 14 15) > [ 0.488858] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0 > [ 0.488977] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 > 14 15) > [ 0.489035] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 0.489035] pnp: PnP ACPI init > [ 0.489035] ACPI: bus type pnp registered > [ 0.492363] pnp: PnP ACPI: found 14 devices > [ 0.492365] ACPI: ACPI bus type pnp unregistered > [ 0.492369] PnPBIOS: Disabled by ACPI PNP > [ 0.492385] PCI: Using ACPI for IRQ routing > [ 0.500048] NET: Registered protocol family 8 > [ 0.500053] NET: Registered protocol family 20 > [ 0.500079] NetLabel: Initializing > [ 0.500079] NetLabel: domain hash size = 128 > [ 0.500079] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.500087] NetLabel: unlabeled traffic allowed by default > [ 0.500096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.500104] hpet0: 3 64-bit timers, 14318180 Hz > [ 0.501959] tracer: 772 pages allocated for 65536 entries of 48 bytes > [ 0.501963] actual entries 65620 > [ 0.502055] AppArmor: AppArmor Filesystem Enabled > [ 0.502079] ACPI: RTC can wake from S4 > [ 0.504043] Switched to high resolution mode on CPU 0 > [ 0.504441] Switched to high resolution mode on CPU 1 > [ 0.508081] system 00:01: iomem range 0xfed14000-0xfed19fff has been > reserved > [ 0.508086] system 00:01: iomem range 0xe0000000-0xe3ffffff has been > reserved > [ 0.508098] system 00:02: ioport range 0x400-0x47f has been reserved > [ 0.508103] system 00:02: ioport range 0x1180-0x119f has been reserved > [ 0.508108] system 00:02: ioport range 0x500-0x53f has been reserved > [ 0.508113] system 00:02: iomem range 0xfec00000-0xfecfffff has been > reserved > [ 0.508118] system 00:02: iomem range 0xfee00000-0xfee0ffff has been > reserved > [ 0.508123] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not > be reserved > [ 0.508129] system 00:02: iomem range 0xffb00000-0xffcfffff could not > be reserved > [ 0.508134] system 00:02: iomem range 0xfc800000-0xfc800fff has been > reserved > [ 0.508139] system 00:02: iomem range 0xfed20000-0xfed7ffff has been > reserved > [ 0.508144] system 00:02: iomem range 0xffe00000-0xffffffff could not > be reserved > [ 0.508154] system 00:03: ioport range 0x290-0x29f has been reserved > [ 0.508174] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved > [ 0.543273] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > [ 0.543275] pci 0000:00:01.0: IO window: disabled > [ 0.543279] pci 0000:00:01.0: MEM window: disabled > [ 0.543282] pci 0000:00:01.0: PREFETCH window: disabled > [ 0.543287] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > [ 0.543289] pci 0000:00:1c.0: IO window: disabled > [ 0.543293] pci 0000:00:1c.0: MEM window: disabled > [ 0.543297] pci 0000:00:1c.0: PREFETCH window: disabled > [ 0.543303] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 > [ 0.543306] pci 0000:00:1c.1: IO window: 0xc000-0xcfff > [ 0.543311] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff > [ 0.543315] pci 0000:00:1c.1: PREFETCH window: disabled > [ 0.543321] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 > [ 0.543324] pci 0000:00:1e.0: IO window: 0xb000-0xbfff > [ 0.543328] pci 0000:00:1e.0: MEM window: disabled > [ 0.543332] pci 0000:00:1e.0: PREFETCH window: disabled > [ 0.543348] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.543353] pci 0000:00:01.0: setting latency timer to 64 > [ 0.543360] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.543364] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.543372] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.543376] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.543382] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.543386] bus: 00 index 0 io port: [0, ffff] > [ 0.543388] bus: 00 index 1 mmio: [0, ffffffff] > [ 0.543390] bus: 01 index 0 mmio: [0, 0] > [ 0.543391] bus: 01 index 1 mmio: [0, 0] > [ 0.543393] bus: 01 index 2 mmio: [0, 0] > [ 0.543395] bus: 01 index 3 mmio: [0, 0] > [ 0.543396] bus: 02 index 0 mmio: [0, 0] > [ 0.543398] bus: 02 index 1 mmio: [0, 0] > [ 0.543400] bus: 02 index 2 mmio: [0, 0] > [ 0.543402] bus: 02 index 3 mmio: [0, 0] > [ 0.543403] bus: 03 index 0 io port: [c000, cfff] > [ 0.543406] bus: 03 index 1 mmio: [fea00000, feafffff] > [ 0.543408] bus: 03 index 2 mmio: [0, 0] > [ 0.543409] bus: 03 index 3 mmio: [0, 0] > [ 0.543411] bus: 04 index 0 io port: [b000, bfff] > [ 0.543413] bus: 04 index 1 mmio: [0, 0] > [ 0.543415] bus: 04 index 2 mmio: [0, 0] > [ 0.543417] bus: 04 index 3 io port: [0, ffff] > [ 0.543419] bus: 04 index 4 mmio: [0, ffffffff] > [ 0.543428] NET: Registered protocol family 2 > [ 0.556124] IP route cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.556363] TCP established hash table entries: 131072 (order: 8, > 1048576 bytes) > [ 0.556812] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.557139] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.557143] TCP reno registered > [ 0.564198] NET: Registered protocol family 1 > [ 0.564311] checking if image is initramfs... it is > [ 1.186013] Freeing initrd memory: 7987k freed > [ 1.187100] audit: initializing netlink socket (disabled) > [ 1.187121] type=2000 audit(1238776160.184:1): initialized > [ 1.192462] highmem bounce pool size: 64 pages > [ 1.192468] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 1.194613] VFS: Disk quotas dquot_6.5.1 > [ 1.194693] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 1.194790] msgmni has been set to 1743 > [ 1.194905] io scheduler noop registered > [ 1.194908] io scheduler anticipatory registered > [ 1.194910] io scheduler deadline registered > [ 1.194921] io scheduler cfq registered (default) > [ 1.194936] pci 0000:00:02.0: Boot video device > [ 1.195215] pcieport-driver 0000:00:01.0: setting latency timer to 64 > [ 1.195249] pcieport-driver 0000:00:01.0: found MSI capability > [ 1.195278] pci_express 0000:00:01.0:pcie00: allocate port service > [ 1.195319] pci_express 0000:00:01.0:pcie03: allocate port service > [ 1.195400] pcieport-driver 0000:00:1c.0: setting latency timer to 64 > [ 1.195432] pcieport-driver 0000:00:1c.0: found MSI capability > [ 1.195463] pci_express 0000:00:1c.0:pcie00: allocate port service > [ 1.195502] pci_express 0000:00:1c.0:pcie02: allocate port service > [ 1.195536] pci_express 0000:00:1c.0:pcie03: allocate port service > [ 1.195618] pcieport-driver 0000:00:1c.1: setting latency timer to 64 > [ 1.195649] pcieport-driver 0000:00:1c.1: found MSI capability > [ 1.195681] pci_express 0000:00:1c.1:pcie00: allocate port service > [ 1.195719] pci_express 0000:00:1c.1:pcie02: allocate port service > [ 1.195758] pci_express 0000:00:1c.1:pcie03: allocate port service > [ 1.196057] isapnp: Scanning for PnP cards... > [ 1.549697] isapnp: No Plug & Play device found > [ 1.580802] hpet_resources: 0xfed00000 is busy > [ 1.580861] Serial: 8250/16550 driver4 ports, IRQ sharing enabled > [ 1.580983] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.581690] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.583402] brd: module loaded > [ 1.583465] input: Macintosh mouse button emulation as > /devices/virtual/input/input0 > [ 1.583587] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at > 0x60,0x64 irq 1,12 > [ 1.586304] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.586310] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.592223] mice: PS/2 mouse device common for all mice > [ 1.592362] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 > [ 1.592386] rtc0: alarms up to one year, y3k, hpet irqs > [ 1.592507] EISA: Probing bus 0 at eisa.0 > [ 1.592534] EISA: Detected 0 cards. > [ 1.592537] cpuidle: using governor ladder > [ 1.592540] cpuidle: using governor menu > [ 1.593014] TCP cubic registered > [ 1.593041] Using IPI No-Shortcut mode > [ 1.593235] registered taskstats version 1 > [ 1.593351] Magic number: 5:833:488 > [ 1.593460] rtc_cmos 00:09: setting system clock to 2009-04-03 16:29:21 > UTC (1238776161) > [ 1.593464] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 1.593466] EDD information not available. > [ 1.593678] Freeing unused kernel memory: 424k freed > [ 1.593711] Write protecting the kernel text: 2576k > [ 1.593735] Write protecting the kernel read-only data: 936k > [ 1.628897] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input1 > [ 1.704136] fuse init (API version 7.9) > [ 1.744213] ACPI: SSDT 7F3EBC10, 02CC (r1 AMI IST 1 MSFT > 3000001) > [ 1.744616] processor ACPI0007:00: registered as cooling_device0 > [ 1.744777] processor ACPI0007:01: registered as cooling_device1 > [ 2.071672] usbcore: registered new interface driver usbfs > [ 2.071694] usbcore: registered new interface driver hub > [ 2.072135] usbcore: registered new device driver usb > [ 2.076629] USB Universal Host Controller Interface driver v3.0 > [ 2.076691] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > [ 2.076700] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 2.076704] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 2.076746] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus > number 1 > [ 2.076777] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080 > [ 2.076908] usb usb1: configuration #1 chosen from 1 choice > [ 2.076932] hub 1-0:1.0: USB hub found > [ 2.076939] hub 1-0:1.0: 2 ports detected > [ 2.130505] No dock devices found. > [ 2.177160] SCSI subsystem initialized > [ 2.191916] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 2.191928] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 2.191932] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 2.191965] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus > number 2 > [ 2.191999] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060 > [ 2.192102] usb usb2: configuration #1 chosen from 1 choice > [ 2.192128] hub 2-0:1.0: USB hub found > [ 2.192136] hub 2-0:1.0: 2 ports detected > [ 2.206769] libata version 3.00 loaded. > [ 2.292778] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> > IRQ 18 > [ 2.292789] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 2.292793] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 2.292823] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus > number 3 > [ 2.292857] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040 > [ 2.292969] usb usb3: configuration #1 chosen from 1 choice > [ 2.292997] hub 3-0:1.0: USB hub found > [ 2.293006] hub 3-0:1.0: 2 ports detected > [ 2.396777] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> > IRQ 16 > [ 2.396786] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > [ 2.396790] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 2.396817] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus > number 4 > [ 2.396849] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020 > [ 2.396958] usb usb4: configuration #1 chosen from 1 choice > [ 2.396988] hub 4-0:1.0: USB hub found > [ 2.396999] hub 4-0:1.0: 2 ports detected > [ 2.500443] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > [ 2.500458] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 2.500462] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 2.500490] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus > number 5 > [ 2.504406] ehci_hcd 0000:00:1d.7: debug port 1 > [ 2.504412] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 2.504420] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb84000 > [ 2.516523] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver > 10 Dec 2004 > [ 2.516667] usb usb5: configuration #1 chosen from 1 choice > [ 2.516693] hub 5-0:1.0: USB hub found > [ 2.516701] hub 5-0:1.0: 8 ports detected > [ 2.724298] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> > IRQ 18 > [ 2.724336] pata_acpi 0000:00:1f.1: setting latency timer to 64 > [ 2.724349] pata_acpi 0000:00:1f.1: PCI INT A disabled > [ 2.724371] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.724384] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 2.724397] r8169 0000:03:00.0: setting latency timer to 64 > [ 2.724731] eth0: RTL8168b/8111b at 0xf8832000, 00:1c:c0:79:06:7f, XID > 38500000 IRQ 220 > [ 2.726684] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 2.726714] pata_acpi 0000:00:1f.2: setting latency timer to 64 > [ 2.726725] pata_acpi 0000:00:1f.2: PCI INT B disabled > [ 2.732129] ata_piix 0000:00:1f.1: version 2.12 > [ 2.732142] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> > IRQ 18 > [ 2.732179] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 2.732234] scsi0 : ata_piix > [ 2.732317] scsi1 : ata_piix > [ 2.733616] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0f0 > irq 14 > [ 2.733619] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0f8 > irq 15 > [ 2.896779] ata1.00: ATA-5: QUANTUM FIREBALLlct15 20, A01.0F00, max > UDMA/66 > [ 2.896786] ata1.00: 39876480 sectors, multi 16: LBA > [ 2.896805] ata1.00: limited to UDMA/33 due to 40-wire cable > [ 2.912684] ata1.00: configured for UDMA/33 > [ 2.912735] ata2: port disabled. ignoring. > [ 2.912857] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL > A01. PQ: 0 ANSI: 5 > [ 2.912948] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 2.912953] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 2.912999] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 2.913056] scsi2 : ata_piix > [ 2.913118] scsi3 : ata_piix > [ 2.913158] ata3: SATA max UDMA/133 cmd 0xd0e0 ctl 0xd0d0 bmdma 0xd0a0 > irq 19 > [ 2.913161] ata4: SATA max UDMA/133 cmd 0xd0c0 ctl 0xd0b0 bmdma 0xd0a8 > irq 19 > [ 3.000035] usb 5-5: new high speed USB device using ehci_hcd and > address 2 > [ 3.068187] ata3.01: NODEV after polling detection > [ 3.076212] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.00, max UDMA/100 > [ 3.092217] ata3.00: configured for UDMA/100 > [ 3.134756] usb 5-5: configuration #1 chosen from 1 choice > [ 3.248538] usb 5-6: new high speed USB device using ehci_hcd and > address 3 > [ 3.259953] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 > 1.00 PQ: 0 ANSI: 5 > [ 3.269736] scsi 0:0:0:0: Attached scsi generic sg0 type 0 > [ 3.269776] scsi 2:0:0:0: Attached scsi generic sg1 type 5 > [ 3.283841] Driver 'sd' needs updating - please use bus_type methods > [ 3.283951] sd 0:0:0:0: [sda] 39876480 512-byte hardware sectors (20417 > MB) > [ 3.283969] sd 0:0:0:0: [sda] Write Protect is off > [ 3.283971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.284015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 3.284092] sd 0:0:0:0: [sda] 39876480 512-byte hardware sectors (20417 > MB) > [ 3.284109] sd 0:0:0:0: [sda] Write Protect is off > [ 3.284112] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.284143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 3.284148] sda:<4>Driver 'sr' needs updating - please use bus_type > methods > [ 3.302484] sda1 sda2 < sda5 > > [ 3.334389] sd 0:0:0:0: [sda] Attached SCSI disk > [ 3.341024] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 > cdda tray > [ 3.341029] Uniform CD-ROM driver Revision: 3.20 > [ 3.341127] sr 2:0:0:0: Attached scsi CD-ROM sr0 > [ 3.397885] usb 5-6: configuration #1 chosen from 1 choice > [ 3.398709] usbcore: registered new interface driver libusual > [ 3.404570] Initializing USB Mass Storage driver... > [ 3.404645] scsi4 : SCSI emulation for USB Mass Storage devices > [ 3.404740] usb-storage: device found at 2 > [ 3.404742] usb-storage: waiting for device to settle before scanning > [ 3.404770] scsi5 : SCSI emulation for USB Mass Storage devices > [ 3.404841] usbcore: registered new interface driver usb-storage > [ 3.404844] USB Mass Storage support registered. > [ 3.404959] usb-storage: device found at 3 > [ 3.404960] usb-storage: waiting for device to settle before scanning > [ 3.821212] PM: Starting manual resume from disk > [ 3.821216] PM: Resume from partition 8:5 > [ 3.821218] PM: Checking hibernation image. > [ 3.821677] PM: Resume from disk failed. > [ 3.867887] EXT3-fs: INFO: recovery required on readonly filesystem. > [ 3.867891] EXT3-fs: write access will be enabled during recovery. > [ 8.404307] usb-storage: device scan complete > [ 8.404906] scsi 4:0:0:0: Direct-Access Kingston DT 101 II > 1.00 PQ: 0 ANSI: 2 > [ 8.406713] sd 4:0:0:0: [sdb] 7872512 512-byte hardware sectors (4031 MB) > [ 8.407250] sd 4:0:0:0: [sdb] Write Protect is off > [ 8.407253] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 > [ 8.407256] sd 4:0:0:0: [sdb] Assuming drive cache: write through > [ 8.409259] sd 4:0:0:0: [sdb] 7872512 512-byte hardware sectors (4031 MB) > [ 8.409882] sd 4:0:0:0: [sdb] Write Protect is off > [ 8.409885] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 > [ 8.409888] sd 4:0:0:0: [sdb] Assuming drive cache: write through > [ 8.409893] sdb: sdb1 > [ 8.410625] sd 4:0:0:0: [sdb] Attached SCSI removable disk > [ 8.410729] sd 4:0:0:0: Attached scsi generic sg2 type 0 > [ 9.404177] usb-storage: device scan complete > [ 9.954023] kjournald starting. Commit interval 5 seconds > [ 9.954037] EXT3-fs: recovery complete. > [ 10.214155] EXT3-fs: mounted filesystem with ordered data mode. > [ 15.016042] usb 5-6: reset high speed USB device using ehci_hcd and > address 3 > [ 15.153691] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 > PMAP PQ: 0 ANSI: 0 CCS > [ 15.154661] sd 5:0:0:0: [sdc] 3950592 512-byte hardware sectors (2023 MB) > [ 15.155161] sd 5:0:0:0: [sdc] Write Protect is off > [ 15.155164] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00 > [ 15.155166] sd 5:0:0:0: [sdc] Assuming drive cache: write through > [ 15.156662] sd 5:0:0:0: [sdc] 3950592 512-byte hardware sectors (2023 MB) > [ 15.157156] sd 5:0:0:0: [sdc] Write Protect is off > [ 15.157160] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00 > [ 15.157164] sd 5:0:0:0: [sdc] Assuming drive cache: write through > [ 15.157169] sdc: sdc1 > [ 15.157750] sd 5:0:0:0: [sdc] Attached SCSI removable disk > [ 15.157852] sd 5:0:0:0: Attached scsi generic sg3 type 0 > [ 19.130048] udevd version 124 started > [ 19.587862] intel_rng: Firmware space is locked read-only. If you can't or > [ 19.587864] intel_rng: don't want to disable this in firmware setup, > and if > [ 19.587865] intel_rng: you are certain that your system has a functional > [ 19.587866] intel_rng: RNG, try using the 'no_fwh_detect' option. > [ 19.660227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 19.764710] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 19.832563] Linux agpgart interface v0.103 > [ 20.039625] input: Power Button (FF) as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 > [ 20.061778] input: PC Speaker as /devices/platform/pcspkr/input/input3 > [ 20.068080] ACPI: Power Button (FF) [PWRF] > [ 20.068201] input: Sleep Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 > [ 20.104588] iTCO_vendor_support: vendor-support=0 > [ 20.118095] agpgart-intel 0000:00:00.0: Intel G33 Chipset > [ 20.118375] agpgart-intel 0000:00:00.0: detected 7164K stolen memory > [ 20.124898] ACPI: Sleep Button (CM) [SLPB] > [ 20.124982] input: Power Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 > [ 20.133574] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 > [ 20.160549] ACPI: Power Button (CM) [PWRB] > [ 20.210682] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) > [ 20.210765] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, > TCOBASE=0x0460) > [ 20.210862] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 20.252237] ACPI Exception (video-1630): AE_NOT_FOUND, Evaluating _DOD > [20080609] > [ 20.252300] input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input6 > [ 20.276275] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) > [ 20.690363] input: ImPS/2 Generic Wheel Mouse as > /devices/platform/i8042/serio1/input/input7 > [ 21.141937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 21.141955] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 21.348517] hda_codec: Unknown model for ALC883, trying auto-probe from > BIOS... > [ 22.098388] lp: driver loaded but no devices found > [ 22.259701] Adding 875500k swap on /dev/sda5. Priority:-1 extents:1 > across:875500k > [ 22.818819] EXT3 FS on sda1, internal journal > [ 23.849591] type=1505 audit(1238776183.896:2): operation="profile_load" > name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4215 > [ 23.999850] type=1505 audit(1238776184.044:3): operation="profile_load" > name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4220 > [ 24.000046] type=1505 audit(1238776184.048:4): operation="profile_load" > name="/usr/sbin/cupsd" name2="default" pid=4220 > [ 24.117708] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 24.780983] hcfpciengine: module license 'see LICENSE file distributed > with driver' taints kernel. > [ 25.293898] usbcore: registered new interface driver hsfusbcd2 > [ 25.418170] ACPI: WMI: Mapper loaded > [ 26.361819] warning: `avahi-daemon' uses 32-bit capabilities (legacy > support in use) > [ 26.431982] apm: BIOS not found. > [ 26.620207] ppdev: user-space parallel port driver > [ 28.310819] Bluetooth: Core ver 2.13 > [ 28.312367] NET: Registered protocol family 31 > [ 28.312375] Bluetooth: HCI device and connection manager initialized > [ 28.312380] Bluetooth: HCI socket layer initialized > [ 28.332567] Bluetooth: L2CAP ver 2.11 > [ 28.332579] Bluetooth: L2CAP socket layer initialized > [ 28.347467] Bluetooth: SCO (Voice Link) ver 0.6 > [ 28.347479] Bluetooth: SCO socket layer initialized > [ 28.366996] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 28.367005] Bluetooth: BNEP filters: protocol multicast > [ 28.422513] Bridge firewalling registered > [ 28.423607] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. > [ 28.473916] Bluetooth: RFCOMM socket layer initialized > [ 28.473938] Bluetooth: RFCOMM TTY layer initialized > [ 28.473942] Bluetooth: RFCOMM ver 1.10 > [ 31.633835] [drm] Initialized drm 1.1.0 20060810 > [ 31.670563] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 31.670578] pci 0000:00:02.0: setting latency timer to 64 > [ 31.672898] [drm] Initialized i915 1.6.0 20060119 on minor 0 > [ 32.165298] sound disabled > [ 32.165340] This Intel(R) 537EP Modem driver won't install on AC97 > modem card, please download intel537EA driver to check if it supports your > modem > [ 32.228721] set status page addr 0x00033000 > [ 32.640727] r8169: eth0: link up > [ 32.640742] r8169: eth0: link up > [ 32.932356] NET: Registered protocol family 17 > [ 34.439657] sound disabled > [ 34.439704] This Intel(R) 537EP Modem driver won't install on AC97 > modem card, please download intel537EA driver to check if it supports your > modem > [ 118.837873] canberra-gtk-pl[5891]: segfault at 69609a40 ip b720184d sp > b6f9afa0 error 6 in libpulse.so.0.4.1[b71c2000+4e000] > [ 191.257553] type=1503 audit(1238776351.304:5): > operation="inode_permission" requested_mask="r::" denied_mask="r::" > fsuid=7 name="/proc/6061/net/" pid=6061 profile="/usr/sbin/cupsd" > [ 192.444303] type=1503 audit(1238776352.488:6): > operation="inode_permission" requested_mask="r::" denied_mask="r::" > fsuid=7 name="/proc/6065/net/" pid=6065 profile="/usr/sbin/cupsd" > [ 192.544710] NET: Registered protocol family 10 > [ 192.547429] lo: Disabled Privacy Extensions > [ 192.549091] type=1503 audit(1238776352.596:7): > operation="socket_create" family="ax25" sock_type="dgram" protocol=0 > pid=6065 profile="/usr/sbin/cupsd" > [ 192.549106] type=1503 audit(1238776352.596:8): > operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 > pid=6065 profile="/usr/sbin/cupsd" > [ 192.549117] type=1503 audit(1238776352.596:9): > operation="socket_create" family="rose" sock_type="dgram" protocol=0 > pid=6065 profile="/usr/sbin/cupsd" > [ 192.549127] type=1503 audit(1238776352.596:10): > operation="socket_create" family="ipx" sock_type="dgram" protocol=0 > pid=6065 profile="/usr/sbin/cupsd" > [ 192.549137] type=1503 audit(1238776352.596:11): > operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 > pid=6065 profile="/usr/sbin/cupsd" > [ 192.549147] type=1503 audit(1238776352.596:12): > operation="socket_create" family="econet" sock_type="dgram" protocol=0 > pid=6065 profile="/usr/sbin/cupsd" > [ 192.549158] type=1503 audit(1238776352.596:13): > operation="socket_create" family="ash" sock_type="dgram" protocol=0 > pid=6065 profile="/usr/sbin/cupsd" > > Module Size Used by > ipv6 263972 14 > nls_iso8859_1 12032 2 > nls_cp437 13696 2 > vfat 18816 2 > fat 57376 1 vfat > af_packet 25728 2 > i915 38144 2 > binfmt_misc 16904 1 > drm 86056 3 i915 > rfcomm 44432 0 > bridge 56980 0 > stp 10628 1 bridge > bnep 20480 2 > sco 18308 2 > l2cap 30464 6 rfcomm,bnep > bluetooth 61924 6 rfcomm,bnep,sco,l2cap > ppdev 15620 0 > acpi_cpufreq 15500 0 > cpufreq_userspace 11396 0 > cpufreq_conservative 14600 0 > cpufreq_powersave 9856 0 > cpufreq_ondemand 14988 2 > cpufreq_stats 13188 0 > freq_table 12672 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats > pci_slot 12552 0 > container 11520 0 > wmi 14504 0 > sbs 19464 0 > sbshc 13440 1 sbs > hsfusbcd2 69312 0 > hsfmc97sis 71488 0 > hsfmc97ati 70440 0 > hsfmc97ali 77112 0 > hsfmc97via 73016 0 > hsfmc97ich 74812 0 > hsfpcibasic3 113032 0 > hsfpcibasic2 71344 0 > hsfserial 28964 8 > hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2 > hsfengine 1308096 9 > hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial > hsfosspec 106348 10 > hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial,hsfengine > hsfsoar 101720 7 > hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2 > hcfpcihw 16896 0 > hcfpciserial 28836 1 hcfpcihw > hcfpciengine 949200 2 hcfpcihw,hcfpciserial > hcfpciosspec 73772 2 hcfpciserial,hcfpciengine > battery 18436 0 > iptable_filter 10752 0 > ip_tables 19600 1 iptable_filter > x_tables 22916 1 ip_tables > ac 12292 0 > parport_pc 39204 0 > lp 17156 0 > parport 42604 3 ppdev,parport_pc,lp > snd_hda_intel 25240 3 > snd_hda_codec 261252 1 snd_hda_intel > snd_pcm_oss 46848 0 > snd_mixer_oss 22784 1 snd_pcm_oss > snd_pcm 83204 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss > snd_seq_dummy 10884 0 > snd_seq_oss 38528 0 > snd_seq_midi 14336 0 > snd_rawmidi 29824 1 snd_seq_midi > snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi > snd_seq 57776 6 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > snd_timer 29960 2 snd_pcm,snd_seq > snd_seq_device 15116 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > evdev 17696 9 > snd 63268 16 > snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > psmouse 45200 0 > video 25104 0 > output 11008 1 video > iTCO_wdt 18596 0 > serio_raw 13444 0 > intel_agp 33724 1 > iTCO_vendor_support 11652 1 iTCO_wdt > pcspkr 10624 0 > button 14224 0 > soundcore 15328 1 snd > snd_page_alloc 16136 2 snd_hda_intel,snd_pcm > agpgart 42184 3 drm,intel_agp > shpchp 37908 0 > pci_hotplug 35236 1 shpchp > ext3 133256 1 > jbd 55444 1 ext3 > mbcache 16004 1 ext3 > usb_storage 81728 2 > sr_mod 22212 0 > cdrom 43168 1 sr_mod > sd_mod 42264 7 > crc_t10dif 9984 1 sd_mod > sg 39732 0 > ata_generic 12932 0 > libusual 27156 1 usb_storage > ata_piix 24580 2 > pata_acpi 12160 0 > libata 177312 3 ata_generic,ata_piix,pata_acpi > scsi_mod 155212 5 usb_storage,sr_mod,sd_mod,sg,libata > dock 16656 1 libata > ehci_hcd 43276 0 > r8169 35972 0 > uhci_hcd 30736 0 > usbcore 148848 7 > hsfusbcd2,hsfosspec,usb_storage,libusual,ehci_hcd,uhci_hcd > thermal 23708 0 > processor 42156 2 acpi_cpufreq,thermal > fan 12548 0 > fbcon 47648 0 > tileblit 10880 1 fbcon > font 16512 1 fbcon > bitblit 13824 1 fbcon > softcursor 9984 1 bitblit > fuse 60828 3 > > > I also would have some US Robotics Modems to put into the computer if > these are easier to install. > I hope this mail is how it shoul be and I would appreciate your help in this. > > Best regards > Timo > > >
