Timo RE: Is there a free alternative from Linuxant No Reinstall the hsfmodem package. Reboot Try detecting the modem with $ sudo wvdialconf MarvS On Tue, Apr 7, 2009 at 1:41 PM, Timo Kosiol <timo@xxxxxxxxx> wrote: > Thanks for the answer, I had the hsfmodem_7.68.00.14full_i386.deb package > from Linuxant installed, but GnomePPP which I used to search my modem > didn't find any modem allthough there are two modems at the pci-slots. But > before you said, that it seems to be the right one I deinstalled it again > because it didn't work. After your answer I tried it again, but still no > modem with neither wvdialconf nor gnomeppp. Now I have a fresh Ubuntu > 8.10. Can you tell me which package I should install. Is there a free > alternative from Linuxant (I know they have the free but still speed > limited one)? > So far, appreciate your answer. > Best regards > Timo > >> TImo, >> >> There seems to be a functional hsdmodem package installed. >> Try: >> $ sudo wvdialconf >> which should detect the modem. >> If so edit in your personal information with: >> $ sudo gedit /etc/wvdial.conf >> removing the symbols ; < > >> $ man wvdial.conf >> will relate details. >> >> Then you should be able to dailout with: >> $ sudo wvdial >> >> MarvS >> >> On Mon, Apr 6, 2009 at 10:36 AM, Timo Kosiol <timo@xxxxxxxxx> wrote: >>> Hello, >>> I would like to get your help to install two modems on my Ubuntu 8.10. >>> I tried a lot the last days, but i didn't found a driver / documentation >>> to get my 2 modems at the pci-slots to work. >>> Here the text from ScanModem. >>> >>> ModemData.txt: >>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List >>> Server, >>> as HTML can contain viruses. Use as the email Subject Line: >>> YourName, YourCountry kernel 2.6.27-7-generic >>> With this Subject Line cogent experts will be alerted, and useful case >>> names left in the Archive. >>> YourCountry will enable Country specific guidance. Linux experts in >>> YourCountry >>> can be found through: http://www.linux.org/groups/index.html. >>> They will know your Country's modem code, which may be essential for >>> dialup service. >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>> Internet >>> Provider mail filters. >>> So in a day, also check the Archived responses at >>> http://www.linmodems.org >>> -------------------------- System information >>> ---------------------------- >>> CPU=i686, >>> Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 >>> (Ubuntu >>> 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 >>> scanModem update of: 2009_02_21 >>> The modem symbolic link is /dev/modem -> ttySHSF0 >>> There are no blacklisted modem drivers in /etc/modprobe* files >>> Potentially useful modem drivers now loaded are: >>> hsfserial snd_hda_intel >>> >>> Attached USB devices are: >>> ID 0951:1607 Kingston Technology Data Traveler 2.0 >>> ID 0951:1613 Kingston Technology >>> If a cellphone is not detected, see >>> http://ubuntuforums.org/archive/index.php/t-878554.html >>> >>> If a USB modem or cellphone is attached and was not detected, please >>> provide available information in your request to discuss@xxxxxxxxxxxxx >>> >>> For candidate card in slot 04:06.0, firmware information and bootup >>> diagnostics are: >>> PCI slot PCI ID SubsystemID Name >>> ---------- --------- --------- -------------- >>> 04:06.0 11c1:0620 11c1:0620 Communication >>> controller: Agere Systems >>> Device 0620 >>> >>> Modem interrupt assignment and sharing: >>> --- Bootup diagnostics for card in PCI slot 04:06.0 ---- >>> [ 0.484699] PCI: 0000:04:06.0 reg 10 io port: [b000, b0ff] >>> [ 0.484743] pci 0000:04:06.0: PME# supported from D3hot D3cold >>> [ 0.484748] pci 0000:04:06.0: PME# disabled >>> >>> The PCI slot 04:06.0 of the modem card may be disabled early in >>> a bootup process, but then enabled later. If modem drivers load >>> but the modem is not responsive, read DOCs/Bootup.txt about possible >>> fixes. >>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>> if help is needed. >>> >>> >>> For candidate card in slot 00:1b.0, firmware information and bootup >>> diagnostics are: >>> PCI slot PCI ID SubsystemID Name >>> ---------- --------- --------- -------------- >>> 00:1b.0 8086:27d8 8086:d608 Audio device: >>> Intel Corporation 82801G >>> >>> Modem interrupt assignment and sharing: >>> 16: 20354 69 IO-APIC-fasteoi uhci_hcd:usb4, >>> HDA Intel, >>> i915@pci:0000:00:02.0 >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>> [ 0.481613] PCI: 0000:00:1b.0 reg 10 64bit mmio: [feb80000, >>> feb83fff] >>> [ 0.481613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> [ 0.481613] pci 0000:00:1b.0: PME# disabled >>> [ 21.141937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 21.141955] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>> >>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>> a bootup process, but then enabled later. If modem drivers load >>> but the modem is not responsive, read DOCs/Bootup.txt about possible >>> fixes. >>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>> if help is needed. >>> >>> >>> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>> The ALSA packages provide audio support and also drivers for some >>> modems. >>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>> >>> The ALSA verion is 1.0.17 >>> The modem cards detected by "aplay -l" are: None >>> >>> >>> The /proc/asound/pcm file reports: >>> ----------------------- >>> 00-02: ALC883 Analog : ALC883 Analog : capture 2 >>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2 >>> >>> about /proc/asound/cards: >>> ------------------------ >>> 0 [Intel ]: HDA-Intel - HDA Intel >>> HDA Intel at 0xfeb80000 irq 16 >>> >>> PCI slot 00:1b.0 has a High Definition Audio Card >>> The drivers are in the kernel modules tree at: >>> /lib/modules/2.6.27-7-generic/updates/snd-hda-intel.ko >>> UNEXPECTED HDA diagnostic outcome. >>> === Finished firmware and bootup diagnostics, next deducing cogent >>> software. === >>> >>> Predictive diagnostics for card in bus 04:06.0: >>> Modem chipset detected on >>> NAME="Communication controller: Agere Systems Device 0620" >>> CLASS=0780 >>> PCIDEV=11c1:0620 >>> SUBSYS=11c1:0620 >>> IRQ=11 >>> IDENT=agrsm >>> >>> For candidate modem in: 04:06.0 >>> 0780 Communication controller: Agere Systems Device 0620 >>> Primary device ID: 11c1:0620 >>> Support type needed or chipset: agrsm >>> >>> >>> ----------------end Softmodem section -------------- >>> >>> Writing DOCs/Intel.txt >>> >>> >>> Predictive diagnostics for card in bus 00:1b.0: >>> Modem chipset not detected on >>> NAME="Audio device: Intel Corporation 82801G " >>> CLASS=0403 >>> PCIDEV=8086:27d8 >>> SUBSYS=8086:d608 >>> IRQ=16 >>> HDA=8086:27d8 >>> SOFT=8086:27d8.HDA >>> >>> >>> High Definition Audio (HDA) cards MAY host a modem chip in their >>> Subsystem, >>> and many are supported by the ALSA audio+modem driver snd-hda-intel >>> A modem was not detected on HDA card 8086:27d8. >>> If another modem card is present, then most likely 8086:27d8 does not >>> host a modem. >>> If another modem card has not been detected, then possibilities are: >>> 1) A Conexant modem chip is present on 8086:27d8, as Conexant >>> chips >>> are frequently not detectable by ALSA diagnostics >>> 2) The modem may be of the older non-PCI Controller Chipset >>> (hardware) type. >>> Try detection with Root permission: >>> sudo wvdialconf /etc/wvdial.conf >>> >>> For candidate modem in: 00:1b.0 >>> 0403 Audio device: Intel Corporation 82801G >>> Primary device ID: 8086:27d8 >>> Subsystem PCI_id 8086:d608 >>> Softmodem codec or chipset from diagnostics: >>> from Archives: >>> >>> >>> >>> Support type needed or chipset: >>> >>> Support can likely be achieved through two mutually exclusive >>> alternatives: >>> 1) The hsfmodem software for Conexant chipset modems: Read >>> DOCs/Conexant.txt >>> The following ALSA alternative CANNOT work with Conexant modems. >>> >>> 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for >>> details, and >>> to test get the package SLMODEMD.gcc4.3.tar.gz from: >>> http://linmodems.technion.ac.il/packages/smartlink/ >>> >>> ----------------end Softmodem section -------------- >>> Writing DOCs/Smartlink.txt >>> ============ end Smartlink section ===================== >>> >>> Completed candidate modem analyses. >>> >>> The base of the UDEV device file system is: /dev/.udev >>> >>> Versions adequately match for the compiler installed: 4.3.2 >>> and the compiler used in kernel assembly: 4.3.2 >>> >>> The patch utility is needed and is needed for compiling ALSA drivers, >>> and >>> possibly others. >>> >>> >>> Minimal compiling resources appear complete: >>> make utility - /usr/bin/make >>> Compiler version 4.3 >>> linuc_headers base folder /lib/modules/2.6.27-7-generic/build >>> >>> However some compilations and executable functions may need additional >>> files, >>> in the FileNames.h (so called kernel "h"eaders) collection installed >>> in >>> /usr/include/ . >>> For martian_modem, additional required packages are needed. The also >>> required headers of package libc6 are commonly installed by default. >>> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev >>> packages, for kernels 2.6.24 and later versions. >>> In not included on your install CD, search for them at >>> http://packages.ubuntu.com >>> or comparable Repository for other Linux distros. >>> When compiling ALSA drivers, the utility "patch" will also be needed. >>> >>> >>> >>> >>> If a driver compilation fails, with message including some lack of some >>> FileName.h (stdio.h for example), then >>> Some additional kernel-header files need installation to /usr/include. >>> The >>> minimal additional packages are libc6-dev >>> and any of its dependents, under Ubuntu linux-libc-dev >>> >>> If an alternate ethernet connection is available, >>> $ apt-get update >>> $ apt-get -s install linux-kernel-devel >>> will install needed packages. >>> For Debian/Ubuntu related distributions, run the following command to >>> display the needed package list: >>> >>> Otherwise packages have to be found through http://packages.ubuntu.com >>> Once downloaded and transferred into a Linux partition, >>> they can be installed alltogether with: >>> $ sudo dpkg -i *.deb >>> >>> >>> Checking pppd properties: >>> -rwsr-xr-- 1 root dip 273064 2008-10-15 20:51 /usr/sbin/pppd >>> >>> In case of an "error 17" "serial loopback" problem, see: >>> >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>> >>> To enable dialout without Root permission do: >>> $ su - root (not for Ubuntu) >>> sudo chmod a+x /usr/sbin/pppd >>> or under Ubuntu related Linuxes >>> sudo chmod a+x /usr/sbin/pppd >>> >>> Checking settings of: /etc/ppp/options >>> asyncmap 0 >>> noauth >>> crtscts >>> lock >>> hide-password >>> modem >>> proxyarp >>> lcp-echo-interval 30 >>> lcp-echo-failure 4 >>> noipx >>> >>> In case of a message like: >>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 >>> Which can interfere with Browser naviagation. >>> >>> Don't worry about the following, it is for experts should trouble >>> shooting be necessary. >>> ========================================================== >>> >>> Checking for modem support lines: >>> -------------------------------------- >>> /device/modem symbolic link: lrwxrwxrwx 1 root root 8 >>> 2009-04-03 >>> 11:29 /dev/modem -> ttySHSF0 >>> slmodemd created symbolic link /dev/ttySL0: >>> Within /etc/udev/ files: >>> /etc/udev/rules.d/00-hcfpci.rules:KERNEL=="ttySHCF0", SYMLINK="modem" >>> /etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem" >>> Within /etc/modprobe.conf files: >>> /etc/modprobe.d/hcfpci.conflicts:install snd-via82xx-modem /bin/true # >>> temporarily disabled by hcfpci - conflicts with hsfmc97via >>> /etc/modprobe.d/hcfpci.conflicts:install snd-atiixp-modem /bin/true # >>> temporarily disabled by hcfpci - conflicts with hsfmc97ati >>> /etc/modprobe.d/hsf.conflicts:install snd-via82xx-modem /bin/true # >>> temporarily disabled by hsf - conflicts with hsfmc97via >>> /etc/modprobe.d/hsf.conflicts:install snd-atiixp-modem /bin/true # >>> temporarily disabled by hsf - conflicts with hsfmc97ati >>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to >>> blacklist unwanted modem drivers >>> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >>> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >>> /etc/modprobe.d/hcfpci:alias /dev/modem /dev/ttySHCF >>> /etc/modprobe.d/hsf:alias /dev/modem /dev/ttySHSF >>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >>> Within any ancient /etc/devfs files: >>> >>> Within ancient kernel 2.4.n /etc/module.conf files: >>> /etc/modules.conf:alias /dev/modem /dev/ttySHSF >>> /etc/modules.conf:alias /dev/modem /dev/ttySHCF >>> --------- end modem support lines -------- >>> >>> Dmesg.txt: >>> CPU0 CPU1 >>> 0: 117 1 IO-APIC-edge timer >>> 1: 22 60 IO-APIC-edge i8042 >>> 4: 1 2 IO-APIC-edge >>> 8: 27 30 IO-APIC-edge rtc0 >>> 9: 0 0 IO-APIC-fasteoi acpi >>> 12: 5877 7021 IO-APIC-edge i8042 >>> 14: 3761 5157 IO-APIC-edge ata_piix >>> 15: 0 0 IO-APIC-edge ata_piix >>> 16: 20360 69 IO-APIC-fasteoi uhci_hcd:usb4, >>> HDA Intel, >>> i915@pci:0000:00:02.0 >>> 18: 0 0 IO-APIC-fasteoi >>> uhci_hcd:usb3 >>> 19: 857 876 IO-APIC-fasteoi uhci_hcd:usb2, >>> ata_piix >>> 23: 1214 1544 IO-APIC-fasteoi uhci_hcd:usb1, >>> ehci_hcd:usb5 >>> 220: 82 186 PCI-MSI-edge eth0 >>> NMI: 0 0 Non-maskable interrupts >>> LOC: 13453 13867 Local timer interrupts >>> RES: 2480 2804 Rescheduling interrupts >>> CAL: 7847 30667 function call interrupts >>> TLB: 973 939 TLB shootdowns >>> SPU: 0 0 Spurious interrupts >>> ERR: 0 >>> MIS: 0 >>> >>> [ 0.000000] Initializing cgroup subsys cpuset >>> [ 0.000000] Initializing cgroup subsys cpu >>> [ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc >>> version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC >>> 2008 (Ubuntu 2.6.27-7.14-generic) >>> [ 0.000000] BIOS-provided physical RAM map: >>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 >>> (usable) >>> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 >>> (reserved) >>> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 >>> (reserved) >>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f23a000 >>> (usable) >>> [ 0.000000] BIOS-e820: 000000007f23a000 - 000000007f27d000 (ACPI >>> NVS) >>> [ 0.000000] BIOS-e820: 000000007f27d000 - 000000007f355000 >>> (reserved) >>> [ 0.000000] BIOS-e820: 000000007f355000 - 000000007f365000 (ACPI >>> NVS) >>> [ 0.000000] BIOS-e820: 000000007f365000 - 000000007f3e1000 >>> (reserved) >>> [ 0.000000] BIOS-e820: 000000007f3e1000 - 000000007f3e7000 (ACPI >>> data) >>> [ 0.000000] BIOS-e820: 000000007f3e7000 - 000000007f3e8000 (ACPI >>> NVS) >>> [ 0.000000] BIOS-e820: 000000007f3e8000 - 000000007f3ea000 (ACPI >>> data) >>> [ 0.000000] BIOS-e820: 000000007f3ea000 - 000000007f3ec000 (ACPI >>> NVS) >>> [ 0.000000] BIOS-e820: 000000007f3ec000 - 000000007f3ed000 >>> (reserved) >>> [ 0.000000] BIOS-e820: 000000007f3ed000 - 000000007f3f1000 (ACPI >>> NVS) >>> [ 0.000000] BIOS-e820: 000000007f3f1000 - 000000007f400000 >>> (reserved) >>> [ 0.000000] BIOS-e820: 000000007f400000 - 000000007f600000 >>> (usable) >>> [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 >>> (reserved) >>> [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 >>> (reserved) >>> [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 >>> (reserved) >>> [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000 >>> [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 >>> [ 0.000000] RAMDISK: 37823000 - 37fefee1 >>> [ 0.000000] DMI 2.4 present. >>> [ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL) >>> [ 0.000000] ACPI: XSDT 7F3E8F10, 0044 (r1 INTEL DG31PR >>> 6222004 MSFT >>> 10013) >>> [ 0.000000] ACPI: FACP 7F3E6D90, 00F4 (r4 INTEL DG31PR >>> 6222004 MSFT >>> 10013) >>> [ 0.000000] ACPI: DSDT 7F3E1010, 4A8F (r1 INTEL DG31PR >>> 0 INTL >>> 20051117) >>> [ 0.000000] ACPI: FACS 7F3E7F40, 0040 >>> [ 0.000000] ACPI: APIC 7F3E6F10, 006C (r2 INTEL DG31PR >>> 6222004 MSFT >>> 10013) >>> [ 0.000000] ACPI: HPET 7F3EFD10, 0038 (r1 INTEL ICH7HPET >>> 6222004 AMI. >>> 1) >>> [ 0.000000] ACPI: MCFG 7F3EFC10, 003C (r1 INTEL DG31PR >>> 6222004 MSFT >>> 97) >>> [ 0.000000] 1142MB HIGHMEM available. >>> [ 0.000000] 896MB LOWMEM available. >>> [ 0.000000] mapped low ram: 0 - 38000000 >>> [ 0.000000] low ram: 00000000 - 38000000 >>> [ 0.000000] bootmap 00008000 - 0000f000 >>> [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - >>> 0038000000] >>> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> >>> [0000000000 - 0000001000] >>> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> >>> [0000001000 - 0000002000] >>> [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> >>> [0000006000 - 0000007000] >>> [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> >>> [0000100000 - 00005c0a20] >>> [ 0.000000] #4 [0037823000 - 0037fefee1] RAMDISK >>> ==> >>> [0037823000 - 0037fefee1] >>> [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> >>> [00005c1000 - 00005c4000] >>> [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> >>> [000009fc00 - 0000100000] >>> [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE >>> ==> >>> [0000007000 - 0000008000] >>> [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP >>> ==> >>> [0000008000 - 000000f000] >>> [ 0.000000] found SMP MP-table at [c00fd420] 000fd420 >>> [ 0.000000] Zone PFN ranges: >>> [ 0.000000] DMA 0x00000000 -> 0x00001000 >>> [ 0.000000] Normal 0x00001000 -> 0x00038000 >>> [ 0.000000] HighMem 0x00038000 -> 0x0007f600 >>> [ 0.000000] Movable zone start PFN for each node >>> [ 0.000000] early_node_map[3] active PFN ranges >>> [ 0.000000] 0: 0x00000000 -> 0x0000009f >>> [ 0.000000] 0: 0x00000100 -> 0x0007f23a >>> [ 0.000000] 0: 0x0007f400 -> 0x0007f600 >>> [ 0.000000] On node 0 totalpages: 521177 >>> [ 0.000000] free_area_init_node: node 0, pgdat c048a500, >>> node_mem_map >>> c1000000 >>> [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 >>> [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 >>> [ 0.000000] HighMem zone: 289328 pages, LIFO batch:31 >>> [ 0.000000] ACPI: PM-Timer IO Port: 0x408 >>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) >>> [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) >>> [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, >>> GSI 0-23 >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl >>> dfl) >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >>> level) >>> [ 0.000000] ACPI: IRQ0 used by override. >>> [ 0.000000] ACPI: IRQ2 used by override. >>> [ 0.000000] ACPI: IRQ9 used by override. >>> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs >>> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 >>> [ 0.000000] Using ACPI (MADT) for SMP configuration information >>> [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs >>> [ 0.000000] mapped APIC to ffffb000 (fee00000) >>> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) >>> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - >>> 00000000000a0000 >>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - >>> 00000000000e0000 >>> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - >>> 0000000000100000 >>> [ 0.000000] Allocating PCI resources starting at 80000000 (gap: >>> 7f600000:7f71c000) >>> [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data >>> [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 >>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >>> Total pages: 516591 >>> [ 0.000000] Kernel command line: >>> root=UUID=c9892d2d-3f6f-4b50-9580-f36a7635e015 ro quiet splash >>> [ 0.000000] Enabling fast FPU save and restore... done. >>> [ 0.000000] Enabling unmasked SIMD FPU exception support... done. >>> [ 0.000000] Initializing CPU#0 >>> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) >>> [ 0.000000] Extended CMOS year: 2000 >>> [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. >>> [ 0.000000] TSC: using PMTIMER calibration value >>> [ 0.000000] Detected 2199.948 MHz processor. >>> [ 0.004000] Console: colour VGA+ 80x25 >>> [ 0.004000] console [tty0] enabled >>> [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, >>> 524288 >>> bytes) >>> [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 >>> bytes) >>> [ 0.004000] Memory: 2051644k/2086912k available (2572k kernel code, >>> 32268k reserved, 1160k data, 424k init, 1167592k highmem) >>> [ 0.004000] virtual kernel memory layout: >>> [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) >>> [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) >>> [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) >>> [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >>> [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) >>> [ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB) >>> [ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB) >>> [ 0.004000] Checking if this processor honours the WP bit even in >>> supervisor mode...Ok. >>> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated >>> [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, >>> CPUs=4, Nodes=1 >>> [ 0.004000] hpet clockevent registered >>> [ 0.004000] Calibrating delay loop (skipped), value calculated >>> using >>> timer frequency.. 4399.89 BogoMIPS (lpj=8799792) >>> [ 0.004000] Security Framework initialized >>> [ 0.004000] SELinux: Disabled at boot. >>> [ 0.004000] AppArmor: AppArmor initialized >>> [ 0.004000] Mount-cache hash table entries: 512 >>> [ 0.004000] Initializing cgroup subsys ns >>> [ 0.004000] Initializing cgroup subsys cpuacct >>> [ 0.004000] Initializing cgroup subsys memory >>> [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K >>> [ 0.004000] CPU: L2 cache: 1024K >>> [ 0.004000] CPU: Physical Processor ID: 0 >>> [ 0.004000] CPU: Processor Core ID: 0 >>> [ 0.004000] using mwait in idle threads. >>> [ 0.004000] Checking 'hlt' instruction... OK. >>> [ 0.017783] ACPI: Core revision 20080609 >>> [ 0.019469] ACPI: Checking initramfs for custom DSDT >>> [ 0.323343] ENABLING IO-APIC IRQs >>> [ 0.323514] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >>> [ 0.363212] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ >>> 2.20GHz >>> stepping 0d >>> [ 0.364022] Booting processor 1/1 ip 6000 >>> [ 0.004000] Initializing CPU#1 >>> [ 0.004000] Calibrating delay using timer specific routine.. >>> 4399.88 >>> BogoMIPS (lpj=8799764) >>> [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K >>> [ 0.004000] CPU: L2 cache: 1024K >>> [ 0.004000] CPU: Physical Processor ID: 0 >>> [ 0.004000] CPU: Processor Core ID: 1 >>> [ 0.448385] CPU1: Intel(R) Pentium(R) Dual CPU E2200 @ >>> 2.20GHz >>> stepping 0d >>> [ 0.448400] checking TSC synchronization [CPU#0 -> CPU#1]: passed. >>> [ 0.452048] Brought up 2 CPUs >>> [ 0.452051] Total of 2 processors activated (8799.77 BogoMIPS). >>> [ 0.452073] CPU0 attaching sched-domain: >>> [ 0.452076] domain 0: span 0-1 level MC >>> [ 0.452078] groups: 0 1 >>> [ 0.452084] CPU1 attaching sched-domain: >>> [ 0.452086] domain 0: span 0-1 level MC >>> [ 0.452088] groups: 1 0 >>> [ 0.452158] net_namespace: 840 bytes >>> [ 0.452158] Booting paravirtualized kernel on bare hardware >>> [ 0.452262] Time: 16:29:20 Date: 04/03/09 >>> [ 0.452289] NET: Registered protocol family 16 >>> [ 0.452308] EISA bus registered >>> [ 0.452308] ACPI: bus type pci registered >>> [ 0.452308] PCI: MCFG configuration 0: base e0000000 segment 0 >>> buses 0 >>> - 64 >>> [ 0.452308] PCI: Not using MMCONFIG. >>> [ 0.465188] PCI: Using configuration type 1 for base access >>> [ 0.465209] ACPI: EC: Look up EC in DSDT >>> [ 0.473060] ACPI: Interpreter enabled >>> [ 0.473064] ACPI: (supports S0 S1 S3 S4 S5) >>> [ 0.473080] ACPI: Using IOAPIC for interrupt routing >>> [ 0.473133] PCI: MCFG configuration 0: base e0000000 segment 0 >>> buses 0 >>> - 64 >>> [ 0.475863] PCI: MCFG area at e0000000 reserved in ACPI motherboard >>> resources >>> [ 0.475866] PCI: updated MCFG configuration 0: base e0000000 >>> segment 0 >>> buses 0 - 31 >>> [ 0.475868] PCI: Using MMCONFIG for extended config space >>> [ 0.476129] ACPI: BIOS _OSI(Linux) query ignored >>> [ 0.476131] ACPI: DMI System Vendor: >>> [ 0.476133] ACPI: DMI Product Name: >>> [ 0.476135] ACPI: DMI Product Version: >>> [ 0.476136] ACPI: DMI Board Name: DG31PR >>> [ 0.476138] ACPI: DMI BIOS Vendor: Intel Corp. >>> [ 0.476140] ACPI: DMI BIOS Date: 06/12/2008 >>> [ 0.476141] ACPI: Please send DMI info above to >>> linux-acpi@xxxxxxxxxxxxxxx >>> [ 0.476144] ACPI: If "acpi_osi=Linux" works better, please notify >>> linux-acpi@xxxxxxxxxxxxxxx >>> [ 0.481613] ACPI: PCI Root Bridge [PCI0] (0000:00) >>> [ 0.481613] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold >>> [ 0.481613] pci 0000:00:01.0: PME# disabled >>> [ 0.481613] PCI: 0000:00:02.0 reg 10 32bit mmio: [feb00000, >>> feb7ffff] >>> [ 0.481613] PCI: 0000:00:02.0 reg 14 io port: [d140, d147] >>> [ 0.481613] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, >>> dfffffff] >>> [ 0.481613] PCI: 0000:00:02.0 reg 1c 32bit mmio: [fe900000, >>> fe9fffff] >>> [ 0.481613] PCI: 0000:00:1b.0 reg 10 64bit mmio: [feb80000, >>> feb83fff] >>> [ 0.481613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> [ 0.481613] pci 0000:00:1b.0: PME# disabled >>> [ 0.481613] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>> [ 0.481613] pci 0000:00:1c.0: PME# disabled >>> [ 0.481613] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>> [ 0.481613] pci 0000:00:1c.1: PME# disabled >>> [ 0.481613] PCI: 0000:00:1d.0 reg 20 io port: [d080, d09f] >>> [ 0.481613] PCI: 0000:00:1d.1 reg 20 io port: [d060, d07f] >>> [ 0.481613] PCI: 0000:00:1d.2 reg 20 io port: [d040, d05f] >>> [ 0.481613] PCI: 0000:00:1d.3 reg 20 io port: [d020, d03f] >>> [ 0.484052] PCI: 0000:00:1d.7 reg 10 32bit mmio: [feb84000, >>> feb843ff] >>> [ 0.484097] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >>> [ 0.484101] pci 0000:00:1d.7: PME# disabled >>> [ 0.484211] pci 0000:00:1f.0: quirk: region 0400-047f claimed by >>> ICH6 >>> ACPI/GPIO/TCO >>> [ 0.484215] pci 0000:00:1f.0: quirk: region 0500-053f claimed by >>> ICH6 GPIO >>> [ 0.484237] PCI: 0000:00:1f.1 reg 10 io port: [d130, d137] >>> [ 0.484243] PCI: 0000:00:1f.1 reg 14 io port: [d120, d123] >>> [ 0.484249] PCI: 0000:00:1f.1 reg 18 io port: [d110, d117] >>> [ 0.484256] PCI: 0000:00:1f.1 reg 1c io port: [d100, d103] >>> [ 0.484262] PCI: 0000:00:1f.1 reg 20 io port: [d0f0, d0ff] >>> [ 0.484299] PCI: 0000:00:1f.2 reg 10 io port: [d0e0, d0e7] >>> [ 0.484304] PCI: 0000:00:1f.2 reg 14 io port: [d0d0, d0d3] >>> [ 0.484310] PCI: 0000:00:1f.2 reg 18 io port: [d0c0, d0c7] >>> [ 0.484316] PCI: 0000:00:1f.2 reg 1c io port: [d0b0, d0b3] >>> [ 0.484321] PCI: 0000:00:1f.2 reg 20 io port: [d0a0, d0af] >>> [ 0.484341] pci 0000:00:1f.2: PME# supported from D3hot >>> [ 0.484345] pci 0000:00:1f.2: PME# disabled >>> [ 0.484385] PCI: 0000:00:1f.3 reg 20 io port: [d000, d01f] >>> [ 0.484543] PCI: 0000:03:00.0 reg 10 io port: [c000, c0ff] >>> [ 0.484565] PCI: 0000:03:00.0 reg 18 64bit mmio: [fea20000, >>> fea20fff] >>> [ 0.484588] PCI: 0000:03:00.0 reg 30 32bit mmio: [fea00000, >>> fea1ffff] >>> [ 0.484609] pci 0000:03:00.0: supports D1 >>> [ 0.484610] pci 0000:03:00.0: supports D2 >>> [ 0.484612] pci 0000:03:00.0: PME# supported from D1 D2 D3hot >>> D3cold >>> [ 0.484618] pci 0000:03:00.0: PME# disabled >>> [ 0.484651] PCI: bridge 0000:00:1c.1 io port: [c000, cfff] >>> [ 0.484655] PCI: bridge 0000:00:1c.1 32bit mmio: [fea00000, >>> feafffff] >>> [ 0.484699] PCI: 0000:04:06.0 reg 10 io port: [b000, b0ff] >>> [ 0.484743] pci 0000:04:06.0: PME# supported from D3hot D3cold >>> [ 0.484748] pci 0000:04:06.0: PME# disabled >>> [ 0.484781] pci 0000:00:1e.0: transparent bridge >>> [ 0.484785] PCI: bridge 0000:00:1e.0 io port: [b000, bfff] >>> [ 0.484807] bus 00 -> node 0 >>> [ 0.484814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> [ 0.485011] ACPI: PCI Interrupt Routing Table >>> [\_SB_.PCI0.P0P2._PRT] >>> [ 0.485154] ACPI: PCI Interrupt Routing Table >>> [\_SB_.PCI0.PEX0._PRT] >>> [ 0.485252] ACPI: PCI Interrupt Routing Table >>> [\_SB_.PCI0.PEX1._PRT] >>> [ 0.488210] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 >>> 12 >>> 14 15) >>> [ 0.488262] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 >>> 12 >>> 14 15) >>> [ 0.488383] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 >>> 12 >>> 14 15) >>> [ 0.488503] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 >>> 12 >>> 14 15) >>> [ 0.488622] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 >>> 12 14 >>> 15) *0 >>> [ 0.488740] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 >>> 12 >>> 14 15) >>> [ 0.488858] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 >>> 12 14 >>> 15) *0 >>> [ 0.488977] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 >>> 12 >>> 14 15) >>> [ 0.489035] Linux Plug and Play Support v0.97 (c) Adam Belay >>> [ 0.489035] pnp: PnP ACPI init >>> [ 0.489035] ACPI: bus type pnp registered >>> [ 0.492363] pnp: PnP ACPI: found 14 devices >>> [ 0.492365] ACPI: ACPI bus type pnp unregistered >>> [ 0.492369] PnPBIOS: Disabled by ACPI PNP >>> [ 0.492385] PCI: Using ACPI for IRQ routing >>> [ 0.500048] NET: Registered protocol family 8 >>> [ 0.500053] NET: Registered protocol family 20 >>> [ 0.500079] NetLabel: Initializing >>> [ 0.500079] NetLabel: domain hash size = 128 >>> [ 0.500079] NetLabel: protocols = UNLABELED CIPSOv4 >>> [ 0.500087] NetLabel: unlabeled traffic allowed by default >>> [ 0.500096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >>> [ 0.500104] hpet0: 3 64-bit timers, 14318180 Hz >>> [ 0.501959] tracer: 772 pages allocated for 65536 entries of 48 >>> bytes >>> [ 0.501963] actual entries 65620 >>> [ 0.502055] AppArmor: AppArmor Filesystem Enabled >>> [ 0.502079] ACPI: RTC can wake from S4 >>> [ 0.504043] Switched to high resolution mode on CPU 0 >>> [ 0.504441] Switched to high resolution mode on CPU 1 >>> [ 0.508081] system 00:01: iomem range 0xfed14000-0xfed19fff has >>> been >>> reserved >>> [ 0.508086] system 00:01: iomem range 0xe0000000-0xe3ffffff has >>> been >>> reserved >>> [ 0.508098] system 00:02: ioport range 0x400-0x47f has been >>> reserved >>> [ 0.508103] system 00:02: ioport range 0x1180-0x119f has been >>> reserved >>> [ 0.508108] system 00:02: ioport range 0x500-0x53f has been >>> reserved >>> [ 0.508113] system 00:02: iomem range 0xfec00000-0xfecfffff has >>> been >>> reserved >>> [ 0.508118] system 00:02: iomem range 0xfee00000-0xfee0ffff has >>> been >>> reserved >>> [ 0.508123] system 00:02: iomem range 0xfed1c000-0xfed1ffff could >>> not >>> be reserved >>> [ 0.508129] system 00:02: iomem range 0xffb00000-0xffcfffff could >>> not >>> be reserved >>> [ 0.508134] system 00:02: iomem range 0xfc800000-0xfc800fff has >>> been >>> reserved >>> [ 0.508139] system 00:02: iomem range 0xfed20000-0xfed7ffff has >>> been >>> reserved >>> [ 0.508144] system 00:02: iomem range 0xffe00000-0xffffffff could >>> not >>> be reserved >>> [ 0.508154] system 00:03: ioport range 0x290-0x29f has been >>> reserved >>> [ 0.508174] system 00:0b: ioport range 0x4d0-0x4d1 has been >>> reserved >>> [ 0.543273] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 >>> [ 0.543275] pci 0000:00:01.0: IO window: disabled >>> [ 0.543279] pci 0000:00:01.0: MEM window: disabled >>> [ 0.543282] pci 0000:00:01.0: PREFETCH window: disabled >>> [ 0.543287] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 >>> [ 0.543289] pci 0000:00:1c.0: IO window: disabled >>> [ 0.543293] pci 0000:00:1c.0: MEM window: disabled >>> [ 0.543297] pci 0000:00:1c.0: PREFETCH window: disabled >>> [ 0.543303] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 >>> [ 0.543306] pci 0000:00:1c.1: IO window: 0xc000-0xcfff >>> [ 0.543311] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff >>> [ 0.543315] pci 0000:00:1c.1: PREFETCH window: disabled >>> [ 0.543321] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 >>> [ 0.543324] pci 0000:00:1e.0: IO window: 0xb000-0xbfff >>> [ 0.543328] pci 0000:00:1e.0: MEM window: disabled >>> [ 0.543332] pci 0000:00:1e.0: PREFETCH window: disabled >>> [ 0.543348] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> >>> IRQ 16 >>> [ 0.543353] pci 0000:00:01.0: setting latency timer to 64 >>> [ 0.543360] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> >>> IRQ 16 >>> [ 0.543364] pci 0000:00:1c.0: setting latency timer to 64 >>> [ 0.543372] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> >>> IRQ 17 >>> [ 0.543376] pci 0000:00:1c.1: setting latency timer to 64 >>> [ 0.543382] pci 0000:00:1e.0: setting latency timer to 64 >>> [ 0.543386] bus: 00 index 0 io port: [0, ffff] >>> [ 0.543388] bus: 00 index 1 mmio: [0, ffffffff] >>> [ 0.543390] bus: 01 index 0 mmio: [0, 0] >>> [ 0.543391] bus: 01 index 1 mmio: [0, 0] >>> [ 0.543393] bus: 01 index 2 mmio: [0, 0] >>> [ 0.543395] bus: 01 index 3 mmio: [0, 0] >>> [ 0.543396] bus: 02 index 0 mmio: [0, 0] >>> [ 0.543398] bus: 02 index 1 mmio: [0, 0] >>> [ 0.543400] bus: 02 index 2 mmio: [0, 0] >>> [ 0.543402] bus: 02 index 3 mmio: [0, 0] >>> [ 0.543403] bus: 03 index 0 io port: [c000, cfff] >>> [ 0.543406] bus: 03 index 1 mmio: [fea00000, feafffff] >>> [ 0.543408] bus: 03 index 2 mmio: [0, 0] >>> [ 0.543409] bus: 03 index 3 mmio: [0, 0] >>> [ 0.543411] bus: 04 index 0 io port: [b000, bfff] >>> [ 0.543413] bus: 04 index 1 mmio: [0, 0] >>> [ 0.543415] bus: 04 index 2 mmio: [0, 0] >>> [ 0.543417] bus: 04 index 3 io port: [0, ffff] >>> [ 0.543419] bus: 04 index 4 mmio: [0, ffffffff] >>> [ 0.543428] NET: Registered protocol family 2 >>> [ 0.556124] IP route cache hash table entries: 32768 (order: 5, >>> 131072 >>> bytes) >>> [ 0.556363] TCP established hash table entries: 131072 (order: 8, >>> 1048576 bytes) >>> [ 0.556812] TCP bind hash table entries: 65536 (order: 7, 524288 >>> bytes) >>> [ 0.557139] TCP: Hash tables configured (established 131072 bind >>> 65536) >>> [ 0.557143] TCP reno registered >>> [ 0.564198] NET: Registered protocol family 1 >>> [ 0.564311] checking if image is initramfs... it is >>> [ 1.186013] Freeing initrd memory: 7987k freed >>> [ 1.187100] audit: initializing netlink socket (disabled) >>> [ 1.187121] type=2000 audit(1238776160.184:1): initialized >>> [ 1.192462] highmem bounce pool size: 64 pages >>> [ 1.192468] HugeTLB registered 4 MB page size, pre-allocated 0 >>> pages >>> [ 1.194613] VFS: Disk quotas dquot_6.5.1 >>> [ 1.194693] Dquot-cache hash table entries: 1024 (order 0, 4096 >>> bytes) >>> [ 1.194790] msgmni has been set to 1743 >>> [ 1.194905] io scheduler noop registered >>> [ 1.194908] io scheduler anticipatory registered >>> [ 1.194910] io scheduler deadline registered >>> [ 1.194921] io scheduler cfq registered (default) >>> [ 1.194936] pci 0000:00:02.0: Boot video device >>> [ 1.195215] pcieport-driver 0000:00:01.0: setting latency timer to >>> 64 >>> [ 1.195249] pcieport-driver 0000:00:01.0: found MSI capability >>> [ 1.195278] pci_express 0000:00:01.0:pcie00: allocate port service >>> [ 1.195319] pci_express 0000:00:01.0:pcie03: allocate port service >>> [ 1.195400] pcieport-driver 0000:00:1c.0: setting latency timer to >>> 64 >>> [ 1.195432] pcieport-driver 0000:00:1c.0: found MSI capability >>> [ 1.195463] pci_express 0000:00:1c.0:pcie00: allocate port service >>> [ 1.195502] pci_express 0000:00:1c.0:pcie02: allocate port service >>> [ 1.195536] pci_express 0000:00:1c.0:pcie03: allocate port service >>> [ 1.195618] pcieport-driver 0000:00:1c.1: setting latency timer to >>> 64 >>> [ 1.195649] pcieport-driver 0000:00:1c.1: found MSI capability >>> [ 1.195681] pci_express 0000:00:1c.1:pcie00: allocate port service >>> [ 1.195719] pci_express 0000:00:1c.1:pcie02: allocate port service >>> [ 1.195758] pci_express 0000:00:1c.1:pcie03: allocate port service >>> [ 1.196057] isapnp: Scanning for PnP cards... >>> [ 1.549697] isapnp: No Plug & Play device found >>> [ 1.580802] hpet_resources: 0xfed00000 is busy >>> [ 1.580861] Serial: 8250/16550 driver4 ports, IRQ sharing enabled >>> [ 1.580983] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>> [ 1.581690] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>> [ 1.583402] brd: module loaded >>> [ 1.583465] input: Macintosh mouse button emulation as >>> /devices/virtual/input/input0 >>> [ 1.583587] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at >>> 0x60,0x64 irq 1,12 >>> [ 1.586304] serio: i8042 KBD port at 0x60,0x64 irq 1 >>> [ 1.586310] serio: i8042 AUX port at 0x60,0x64 irq 12 >>> [ 1.592223] mice: PS/2 mouse device common for all mice >>> [ 1.592362] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 >>> [ 1.592386] rtc0: alarms up to one year, y3k, hpet irqs >>> [ 1.592507] EISA: Probing bus 0 at eisa.0 >>> [ 1.592534] EISA: Detected 0 cards. >>> [ 1.592537] cpuidle: using governor ladder >>> [ 1.592540] cpuidle: using governor menu >>> [ 1.593014] TCP cubic registered >>> [ 1.593041] Using IPI No-Shortcut mode >>> [ 1.593235] registered taskstats version 1 >>> [ 1.593351] Magic number: 5:833:488 >>> [ 1.593460] rtc_cmos 00:09: setting system clock to 2009-04-03 >>> 16:29:21 >>> UTC (1238776161) >>> [ 1.593464] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >>> [ 1.593466] EDD information not available. >>> [ 1.593678] Freeing unused kernel memory: 424k freed >>> [ 1.593711] Write protecting the kernel text: 2576k >>> [ 1.593735] Write protecting the kernel read-only data: 936k >>> [ 1.628897] input: AT Translated Set 2 keyboard as >>> /devices/platform/i8042/serio0/input/input1 >>> [ 1.704136] fuse init (API version 7.9) >>> [ 1.744213] ACPI: SSDT 7F3EBC10, 02CC (r1 AMI IST >>> 1 MSFT >>> 3000001) >>> [ 1.744616] processor ACPI0007:00: registered as cooling_device0 >>> [ 1.744777] processor ACPI0007:01: registered as cooling_device1 >>> [ 2.071672] usbcore: registered new interface driver usbfs >>> [ 2.071694] usbcore: registered new interface driver hub >>> [ 2.072135] usbcore: registered new device driver usb >>> [ 2.076629] USB Universal Host Controller Interface driver v3.0 >>> [ 2.076691] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) >>> -> >>> IRQ 23 >>> [ 2.076700] uhci_hcd 0000:00:1d.0: setting latency timer to 64 >>> [ 2.076704] uhci_hcd 0000:00:1d.0: UHCI Host Controller >>> [ 2.076746] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned >>> bus >>> number 1 >>> [ 2.076777] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080 >>> [ 2.076908] usb usb1: configuration #1 chosen from 1 choice >>> [ 2.076932] hub 1-0:1.0: USB hub found >>> [ 2.076939] hub 1-0:1.0: 2 ports detected >>> [ 2.130505] No dock devices found. >>> [ 2.177160] SCSI subsystem initialized >>> [ 2.191916] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) >>> -> >>> IRQ 19 >>> [ 2.191928] uhci_hcd 0000:00:1d.1: setting latency timer to 64 >>> [ 2.191932] uhci_hcd 0000:00:1d.1: UHCI Host Controller >>> [ 2.191965] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned >>> bus >>> number 2 >>> [ 2.191999] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060 >>> [ 2.192102] usb usb2: configuration #1 chosen from 1 choice >>> [ 2.192128] hub 2-0:1.0: USB hub found >>> [ 2.192136] hub 2-0:1.0: 2 ports detected >>> [ 2.206769] libata version 3.00 loaded. >>> [ 2.292778] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) >>> -> >>> IRQ 18 >>> [ 2.292789] uhci_hcd 0000:00:1d.2: setting latency timer to 64 >>> [ 2.292793] uhci_hcd 0000:00:1d.2: UHCI Host Controller >>> [ 2.292823] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned >>> bus >>> number 3 >>> [ 2.292857] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040 >>> [ 2.292969] usb usb3: configuration #1 chosen from 1 choice >>> [ 2.292997] hub 3-0:1.0: USB hub found >>> [ 2.293006] hub 3-0:1.0: 2 ports detected >>> [ 2.396777] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 2.396786] uhci_hcd 0000:00:1d.3: setting latency timer to 64 >>> [ 2.396790] uhci_hcd 0000:00:1d.3: UHCI Host Controller >>> [ 2.396817] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned >>> bus >>> number 4 >>> [ 2.396849] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020 >>> [ 2.396958] usb usb4: configuration #1 chosen from 1 choice >>> [ 2.396988] hub 4-0:1.0: USB hub found >>> [ 2.396999] hub 4-0:1.0: 2 ports detected >>> [ 2.500443] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) >>> -> >>> IRQ 23 >>> [ 2.500458] ehci_hcd 0000:00:1d.7: setting latency timer to 64 >>> [ 2.500462] ehci_hcd 0000:00:1d.7: EHCI Host Controller >>> [ 2.500490] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned >>> bus >>> number 5 >>> [ 2.504406] ehci_hcd 0000:00:1d.7: debug port 1 >>> [ 2.504412] ehci_hcd 0000:00:1d.7: cache line size of 32 is not >>> supported >>> [ 2.504420] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb84000 >>> [ 2.516523] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, >>> driver >>> 10 Dec 2004 >>> [ 2.516667] usb usb5: configuration #1 chosen from 1 choice >>> [ 2.516693] hub 5-0:1.0: USB hub found >>> [ 2.516701] hub 5-0:1.0: 8 ports detected >>> [ 2.724298] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, >>> low) -> >>> IRQ 18 >>> [ 2.724336] pata_acpi 0000:00:1f.1: setting latency timer to 64 >>> [ 2.724349] pata_acpi 0000:00:1f.1: PCI INT A disabled >>> [ 2.724371] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded >>> [ 2.724384] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> >>> IRQ 17 >>> [ 2.724397] r8169 0000:03:00.0: setting latency timer to 64 >>> [ 2.724731] eth0: RTL8168b/8111b at 0xf8832000, 00:1c:c0:79:06:7f, >>> XID >>> 38500000 IRQ 220 >>> [ 2.726684] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, >>> low) -> >>> IRQ 19 >>> [ 2.726714] pata_acpi 0000:00:1f.2: setting latency timer to 64 >>> [ 2.726725] pata_acpi 0000:00:1f.2: PCI INT B disabled >>> [ 2.732129] ata_piix 0000:00:1f.1: version 2.12 >>> [ 2.732142] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) >>> -> >>> IRQ 18 >>> [ 2.732179] ata_piix 0000:00:1f.1: setting latency timer to 64 >>> [ 2.732234] scsi0 : ata_piix >>> [ 2.732317] scsi1 : ata_piix >>> [ 2.733616] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma >>> 0xd0f0 >>> irq 14 >>> [ 2.733619] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma >>> 0xd0f8 >>> irq 15 >>> [ 2.896779] ata1.00: ATA-5: QUANTUM FIREBALLlct15 20, A01.0F00, max >>> UDMA/66 >>> [ 2.896786] ata1.00: 39876480 sectors, multi 16: LBA >>> [ 2.896805] ata1.00: limited to UDMA/33 due to 40-wire cable >>> [ 2.912684] ata1.00: configured for UDMA/33 >>> [ 2.912735] ata2: port disabled. ignoring. >>> [ 2.912857] scsi 0:0:0:0: Direct-Access ATA QUANTUM >>> FIREBALL >>> A01. PQ: 0 ANSI: 5 >>> [ 2.912948] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) >>> -> >>> IRQ 19 >>> [ 2.912953] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] >>> [ 2.912999] ata_piix 0000:00:1f.2: setting latency timer to 64 >>> [ 2.913056] scsi2 : ata_piix >>> [ 2.913118] scsi3 : ata_piix >>> [ 2.913158] ata3: SATA max UDMA/133 cmd 0xd0e0 ctl 0xd0d0 bmdma >>> 0xd0a0 >>> irq 19 >>> [ 2.913161] ata4: SATA max UDMA/133 cmd 0xd0c0 ctl 0xd0b0 bmdma >>> 0xd0a8 >>> irq 19 >>> [ 3.000035] usb 5-5: new high speed USB device using ehci_hcd and >>> address 2 >>> [ 3.068187] ata3.01: NODEV after polling detection >>> [ 3.076212] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.00, max >>> UDMA/100 >>> [ 3.092217] ata3.00: configured for UDMA/100 >>> [ 3.134756] usb 5-5: configuration #1 chosen from 1 choice >>> [ 3.248538] usb 5-6: new high speed USB device using ehci_hcd and >>> address 3 >>> [ 3.259953] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM >>> GH22NS30 >>> 1.00 PQ: 0 ANSI: 5 >>> [ 3.269736] scsi 0:0:0:0: Attached scsi generic sg0 type 0 >>> [ 3.269776] scsi 2:0:0:0: Attached scsi generic sg1 type 5 >>> [ 3.283841] Driver 'sd' needs updating - please use bus_type >>> methods >>> [ 3.283951] sd 0:0:0:0: [sda] 39876480 512-byte hardware sectors >>> (20417 >>> MB) >>> [ 3.283969] sd 0:0:0:0: [sda] Write Protect is off >>> [ 3.283971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> [ 3.284015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>> enabled, doesn't support DPO or FUA >>> [ 3.284092] sd 0:0:0:0: [sda] 39876480 512-byte hardware sectors >>> (20417 >>> MB) >>> [ 3.284109] sd 0:0:0:0: [sda] Write Protect is off >>> [ 3.284112] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> [ 3.284143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>> enabled, doesn't support DPO or FUA >>> [ 3.284148] sda:<4>Driver 'sr' needs updating - please use >>> bus_type >>> methods >>> [ 3.302484] sda1 sda2 < sda5 > >>> [ 3.334389] sd 0:0:0:0: [sda] Attached SCSI disk >>> [ 3.341024] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw >>> xa/form2 >>> cdda tray >>> [ 3.341029] Uniform CD-ROM driver Revision: 3.20 >>> [ 3.341127] sr 2:0:0:0: Attached scsi CD-ROM sr0 >>> [ 3.397885] usb 5-6: configuration #1 chosen from 1 choice >>> [ 3.398709] usbcore: registered new interface driver libusual >>> [ 3.404570] Initializing USB Mass Storage driver... >>> [ 3.404645] scsi4 : SCSI emulation for USB Mass Storage devices >>> [ 3.404740] usb-storage: device found at 2 >>> [ 3.404742] usb-storage: waiting for device to settle before >>> scanning >>> [ 3.404770] scsi5 : SCSI emulation for USB Mass Storage devices >>> [ 3.404841] usbcore: registered new interface driver usb-storage >>> [ 3.404844] USB Mass Storage support registered. >>> [ 3.404959] usb-storage: device found at 3 >>> [ 3.404960] usb-storage: waiting for device to settle before >>> scanning >>> [ 3.821212] PM: Starting manual resume from disk >>> [ 3.821216] PM: Resume from partition 8:5 >>> [ 3.821218] PM: Checking hibernation image. >>> [ 3.821677] PM: Resume from disk failed. >>> [ 3.867887] EXT3-fs: INFO: recovery required on readonly >>> filesystem. >>> [ 3.867891] EXT3-fs: write access will be enabled during recovery. >>> [ 8.404307] usb-storage: device scan complete >>> [ 8.404906] scsi 4:0:0:0: Direct-Access Kingston DT 101 II >>> 1.00 PQ: 0 ANSI: 2 >>> [ 8.406713] sd 4:0:0:0: [sdb] 7872512 512-byte hardware sectors >>> (4031 MB) >>> [ 8.407250] sd 4:0:0:0: [sdb] Write Protect is off >>> [ 8.407253] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 >>> [ 8.407256] sd 4:0:0:0: [sdb] Assuming drive cache: write through >>> [ 8.409259] sd 4:0:0:0: [sdb] 7872512 512-byte hardware sectors >>> (4031 MB) >>> [ 8.409882] sd 4:0:0:0: [sdb] Write Protect is off >>> [ 8.409885] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 >>> [ 8.409888] sd 4:0:0:0: [sdb] Assuming drive cache: write through >>> [ 8.409893] sdb: sdb1 >>> [ 8.410625] sd 4:0:0:0: [sdb] Attached SCSI removable disk >>> [ 8.410729] sd 4:0:0:0: Attached scsi generic sg2 type 0 >>> [ 9.404177] usb-storage: device scan complete >>> [ 9.954023] kjournald starting. Commit interval 5 seconds >>> [ 9.954037] EXT3-fs: recovery complete. >>> [ 10.214155] EXT3-fs: mounted filesystem with ordered data mode. >>> [ 15.016042] usb 5-6: reset high speed USB device using ehci_hcd and >>> address 3 >>> [ 15.153691] scsi 5:0:0:0: Direct-Access Kingston DataTraveler >>> 2.0 >>> PMAP PQ: 0 ANSI: 0 CCS >>> [ 15.154661] sd 5:0:0:0: [sdc] 3950592 512-byte hardware sectors >>> (2023 MB) >>> [ 15.155161] sd 5:0:0:0: [sdc] Write Protect is off >>> [ 15.155164] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00 >>> [ 15.155166] sd 5:0:0:0: [sdc] Assuming drive cache: write through >>> [ 15.156662] sd 5:0:0:0: [sdc] 3950592 512-byte hardware sectors >>> (2023 MB) >>> [ 15.157156] sd 5:0:0:0: [sdc] Write Protect is off >>> [ 15.157160] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00 >>> [ 15.157164] sd 5:0:0:0: [sdc] Assuming drive cache: write through >>> [ 15.157169] sdc: sdc1 >>> [ 15.157750] sd 5:0:0:0: [sdc] Attached SCSI removable disk >>> [ 15.157852] sd 5:0:0:0: Attached scsi generic sg3 type 0 >>> [ 19.130048] udevd version 124 started >>> [ 19.587862] intel_rng: Firmware space is locked read-only. If you >>> can't or >>> [ 19.587864] intel_rng: don't want to disable this in firmware setup, >>> and if >>> [ 19.587865] intel_rng: you are certain that your system has a >>> functional >>> [ 19.587866] intel_rng: RNG, try using the 'no_fwh_detect' option. >>> [ 19.660227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>> [ 19.764710] shpchp: Standard Hot Plug PCI Controller Driver version: >>> 0.4 >>> [ 19.832563] Linux agpgart interface v0.103 >>> [ 20.039625] input: Power Button (FF) as >>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 >>> [ 20.061778] input: PC Speaker as >>> /devices/platform/pcspkr/input/input3 >>> [ 20.068080] ACPI: Power Button (FF) [PWRF] >>> [ 20.068201] input: Sleep Button (CM) as >>> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 >>> [ 20.104588] iTCO_vendor_support: vendor-support=0 >>> [ 20.118095] agpgart-intel 0000:00:00.0: Intel G33 Chipset >>> [ 20.118375] agpgart-intel 0000:00:00.0: detected 7164K stolen memory >>> [ 20.124898] ACPI: Sleep Button (CM) [SLPB] >>> [ 20.124982] input: Power Button (CM) as >>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 >>> [ 20.133574] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ >>> 0xd0000000 >>> [ 20.160549] ACPI: Power Button (CM) [PWRB] >>> [ 20.210682] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 >>> (30-Apr-2008) >>> [ 20.210765] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, >>> TCOBASE=0x0460) >>> [ 20.210862] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >>> [ 20.252237] ACPI Exception (video-1630): AE_NOT_FOUND, Evaluating >>> _DOD >>> [20080609] >>> [ 20.252300] input: Video Bus as >>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input6 >>> [ 20.276275] ACPI: Video Device [GFX0] (multi-head: no rom: yes >>> post: no) >>> [ 20.690363] input: ImPS/2 Generic Wheel Mouse as >>> /devices/platform/i8042/serio1/input/input7 >>> [ 21.141937] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 21.141955] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>> [ 21.348517] hda_codec: Unknown model for ALC883, trying auto-probe >>> from >>> BIOS... >>> [ 22.098388] lp: driver loaded but no devices found >>> [ 22.259701] Adding 875500k swap on /dev/sda5. Priority:-1 >>> extents:1 >>> across:875500k >>> [ 22.818819] EXT3 FS on sda1, internal journal >>> [ 23.849591] type=1505 audit(1238776183.896:2): >>> operation="profile_load" >>> name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4215 >>> [ 23.999850] type=1505 audit(1238776184.044:3): >>> operation="profile_load" >>> name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4220 >>> [ 24.000046] type=1505 audit(1238776184.048:4): >>> operation="profile_load" >>> name="/usr/sbin/cupsd" name2="default" pid=4220 >>> [ 24.117708] ip_tables: (C) 2000-2006 Netfilter Core Team >>> [ 24.780983] hcfpciengine: module license 'see LICENSE file >>> distributed >>> with driver' taints kernel. >>> [ 25.293898] usbcore: registered new interface driver hsfusbcd2 >>> [ 25.418170] ACPI: WMI: Mapper loaded >>> [ 26.361819] warning: `avahi-daemon' uses 32-bit capabilities (legacy >>> support in use) >>> [ 26.431982] apm: BIOS not found. >>> [ 26.620207] ppdev: user-space parallel port driver >>> [ 28.310819] Bluetooth: Core ver 2.13 >>> [ 28.312367] NET: Registered protocol family 31 >>> [ 28.312375] Bluetooth: HCI device and connection manager initialized >>> [ 28.312380] Bluetooth: HCI socket layer initialized >>> [ 28.332567] Bluetooth: L2CAP ver 2.11 >>> [ 28.332579] Bluetooth: L2CAP socket layer initialized >>> [ 28.347467] Bluetooth: SCO (Voice Link) ver 0.6 >>> [ 28.347479] Bluetooth: SCO socket layer initialized >>> [ 28.366996] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >>> [ 28.367005] Bluetooth: BNEP filters: protocol multicast >>> [ 28.422513] Bridge firewalling registered >>> [ 28.423607] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM >>> feature. >>> [ 28.473916] Bluetooth: RFCOMM socket layer initialized >>> [ 28.473938] Bluetooth: RFCOMM TTY layer initialized >>> [ 28.473942] Bluetooth: RFCOMM ver 1.10 >>> [ 31.633835] [drm] Initialized drm 1.1.0 20060810 >>> [ 31.670563] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> >>> IRQ 16 >>> [ 31.670578] pci 0000:00:02.0: setting latency timer to 64 >>> [ 31.672898] [drm] Initialized i915 1.6.0 20060119 on minor 0 >>> [ 32.165298] sound disabled >>> [ 32.165340] This Intel(R) 537EP Modem driver won't install on AC97 >>> modem card, please download intel537EA driver to check if it supports >>> your >>> modem >>> [ 32.228721] set status page addr 0x00033000 >>> [ 32.640727] r8169: eth0: link up >>> [ 32.640742] r8169: eth0: link up >>> [ 32.932356] NET: Registered protocol family 17 >>> [ 34.439657] sound disabled >>> [ 34.439704] This Intel(R) 537EP Modem driver won't install on AC97 >>> modem card, please download intel537EA driver to check if it supports >>> your >>> modem >>> [ 118.837873] canberra-gtk-pl[5891]: segfault at 69609a40 ip b720184d >>> sp >>> b6f9afa0 error 6 in libpulse.so.0.4.1[b71c2000+4e000] >>> [ 191.257553] type=1503 audit(1238776351.304:5): >>> operation="inode_permission" requested_mask="r::" denied_mask="r::" >>> fsuid=7 name="/proc/6061/net/" pid=6061 profile="/usr/sbin/cupsd" >>> [ 192.444303] type=1503 audit(1238776352.488:6): >>> operation="inode_permission" requested_mask="r::" denied_mask="r::" >>> fsuid=7 name="/proc/6065/net/" pid=6065 profile="/usr/sbin/cupsd" >>> [ 192.544710] NET: Registered protocol family 10 >>> [ 192.547429] lo: Disabled Privacy Extensions >>> [ 192.549091] type=1503 audit(1238776352.596:7): >>> operation="socket_create" family="ax25" sock_type="dgram" protocol=0 >>> pid=6065 profile="/usr/sbin/cupsd" >>> [ 192.549106] type=1503 audit(1238776352.596:8): >>> operation="socket_create" family="netrom" sock_type="seqpacket" >>> protocol=0 >>> pid=6065 profile="/usr/sbin/cupsd" >>> [ 192.549117] type=1503 audit(1238776352.596:9): >>> operation="socket_create" family="rose" sock_type="dgram" protocol=0 >>> pid=6065 profile="/usr/sbin/cupsd" >>> [ 192.549127] type=1503 audit(1238776352.596:10): >>> operation="socket_create" family="ipx" sock_type="dgram" protocol=0 >>> pid=6065 profile="/usr/sbin/cupsd" >>> [ 192.549137] type=1503 audit(1238776352.596:11): >>> operation="socket_create" family="appletalk" sock_type="dgram" >>> protocol=0 >>> pid=6065 profile="/usr/sbin/cupsd" >>> [ 192.549147] type=1503 audit(1238776352.596:12): >>> operation="socket_create" family="econet" sock_type="dgram" protocol=0 >>> pid=6065 profile="/usr/sbin/cupsd" >>> [ 192.549158] type=1503 audit(1238776352.596:13): >>> operation="socket_create" family="ash" sock_type="dgram" protocol=0 >>> pid=6065 profile="/usr/sbin/cupsd" >>> >>> Module Size Used by >>> ipv6 263972 14 >>> nls_iso8859_1 12032 2 >>> nls_cp437 13696 2 >>> vfat 18816 2 >>> fat 57376 1 vfat >>> af_packet 25728 2 >>> i915 38144 2 >>> binfmt_misc 16904 1 >>> drm 86056 3 i915 >>> rfcomm 44432 0 >>> bridge 56980 0 >>> stp 10628 1 bridge >>> bnep 20480 2 >>> sco 18308 2 >>> l2cap 30464 6 rfcomm,bnep >>> bluetooth 61924 6 rfcomm,bnep,sco,l2cap >>> ppdev 15620 0 >>> acpi_cpufreq 15500 0 >>> cpufreq_userspace 11396 0 >>> cpufreq_conservative 14600 0 >>> cpufreq_powersave 9856 0 >>> cpufreq_ondemand 14988 2 >>> cpufreq_stats 13188 0 >>> freq_table 12672 3 >>> acpi_cpufreq,cpufreq_ondemand,cpufreq_stats >>> pci_slot 12552 0 >>> container 11520 0 >>> wmi 14504 0 >>> sbs 19464 0 >>> sbshc 13440 1 sbs >>> hsfusbcd2 69312 0 >>> hsfmc97sis 71488 0 >>> hsfmc97ati 70440 0 >>> hsfmc97ali 77112 0 >>> hsfmc97via 73016 0 >>> hsfmc97ich 74812 0 >>> hsfpcibasic3 113032 0 >>> hsfpcibasic2 71344 0 >>> hsfserial 28964 8 >>> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2 >>> hsfengine 1308096 9 >>> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial >>> hsfosspec 106348 10 >>> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial,hsfengine >>> hsfsoar 101720 7 >>> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2 >>> hcfpcihw 16896 0 >>> hcfpciserial 28836 1 hcfpcihw >>> hcfpciengine 949200 2 hcfpcihw,hcfpciserial >>> hcfpciosspec 73772 2 hcfpciserial,hcfpciengine >>> battery 18436 0 >>> iptable_filter 10752 0 >>> ip_tables 19600 1 iptable_filter >>> x_tables 22916 1 ip_tables >>> ac 12292 0 >>> parport_pc 39204 0 >>> lp 17156 0 >>> parport 42604 3 ppdev,parport_pc,lp >>> snd_hda_intel 25240 3 >>> snd_hda_codec 261252 1 snd_hda_intel >>> snd_pcm_oss 46848 0 >>> snd_mixer_oss 22784 1 snd_pcm_oss >>> snd_pcm 83204 3 >>> snd_hda_intel,snd_hda_codec,snd_pcm_oss >>> snd_seq_dummy 10884 0 >>> snd_seq_oss 38528 0 >>> snd_seq_midi 14336 0 >>> snd_rawmidi 29824 1 snd_seq_midi >>> snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi >>> snd_seq 57776 6 >>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >>> snd_timer 29960 2 snd_pcm,snd_seq >>> snd_seq_device 15116 5 >>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >>> evdev 17696 9 >>> snd 63268 16 >>> snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>> psmouse 45200 0 >>> video 25104 0 >>> output 11008 1 video >>> iTCO_wdt 18596 0 >>> serio_raw 13444 0 >>> intel_agp 33724 1 >>> iTCO_vendor_support 11652 1 iTCO_wdt >>> pcspkr 10624 0 >>> button 14224 0 >>> soundcore 15328 1 snd >>> snd_page_alloc 16136 2 snd_hda_intel,snd_pcm >>> agpgart 42184 3 drm,intel_agp >>> shpchp 37908 0 >>> pci_hotplug 35236 1 shpchp >>> ext3 133256 1 >>> jbd 55444 1 ext3 >>> mbcache 16004 1 ext3 >>> usb_storage 81728 2 >>> sr_mod 22212 0 >>> cdrom 43168 1 sr_mod >>> sd_mod 42264 7 >>> crc_t10dif 9984 1 sd_mod >>> sg 39732 0 >>> ata_generic 12932 0 >>> libusual 27156 1 usb_storage >>> ata_piix 24580 2 >>> pata_acpi 12160 0 >>> libata 177312 3 ata_generic,ata_piix,pata_acpi >>> scsi_mod 155212 5 >>> usb_storage,sr_mod,sd_mod,sg,libata >>> dock 16656 1 libata >>> ehci_hcd 43276 0 >>> r8169 35972 0 >>> uhci_hcd 30736 0 >>> usbcore 148848 7 >>> hsfusbcd2,hsfosspec,usb_storage,libusual,ehci_hcd,uhci_hcd >>> thermal 23708 0 >>> processor 42156 2 acpi_cpufreq,thermal >>> fan 12548 0 >>> fbcon 47648 0 >>> tileblit 10880 1 fbcon >>> font 16512 1 fbcon >>> bitblit 13824 1 fbcon >>> softcursor 9984 1 bitblit >>> fuse 60828 3 >>> >>> >>> I also would have some US Robotics Modems to put into the computer if >>> these are easier to install. >>> I hope this mail is how it shoul be and I would appreciate your help in >>> this. >>> >>> Best regards >>> Timo >>> >>> >>> >> >> > >
