PLEASE, can you a help me?
THANKS!!!!
Atenciosamente,
............................................................
INFOREVER Serviços e Comércio
Everson Pedroso Machado
everson@xxxxxxxxxxxxxxxx
(0xx11) 3721-8649 / 9944-1100 / Nextel: 139*7720
Skype = aloinforever
>>> Seja LIVRE... Seja LEGAL... Seja LINUX!!! <<<
*** Antes de imprimir pense na Responsabilidade com Custos e
Compromisso com NOSSO PLANETA ***
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Aug 25 17:32:09 UTC 2008
scanModem update of: 2009_04_04
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 05e3:0716 Genesys Logic, Inc.
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 03:01.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
03:01.0 134d:2189 134d:1002 Modem: PCTel Inc HSP56 MicroModem
Modem interrupt assignment and sharing:
18: 9 0 IO-APIC-fasteoi uhci_hcd:usb2
--- Bootup diagnostics for card in PCI slot 03:01.0 ----
[ 18.839546] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 18.839785] 0000:03:01.0: ttyS1 at I/O 0xa008 (irq = 18) is a 16450
[ 18.839920] 0000:03:01.0: ttyS2 at I/O 0xa010 (irq = 18) is a 8250
[ 18.840054] 0000:03:01.0: ttyS3 at I/O 0xa018 (irq = 18) is a 16450
[ 18.840094] Couldn't register serial port 0000:03:01.0: -28
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1458:a002 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
16: 318770 0 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel, i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 26.641387] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.641407] PCI: Setting latency timer of device 0000:00:1b.0 to 64
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-01: ALC662 Digital : ALC662 Digital : playback 1
00-00: ALC662 Analog : ALC662 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xe21c0000 irq 16
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-21-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 03:01.0:
Modem chipset detected on
NAME="Modem: PCTel Inc HSP56 MicroModem "
CLASS=0703
PCIDEV=134d:2189
SUBSYS=134d:1002
IRQ=18
IDENT=slamr
For candidate modem in: 03:01.0
0703 Modem: PCTel Inc HSP56 MicroModem
Primary device ID: 134d:2189
Support type needed or chipset: slamr
Writing DOCs/Intel.txt
134d:2189 is a PCTel HSP56 MicroModem 688T modem with the Oasis chipset.
Under 2.6.n kernels, it is only supported through the Smartlink slamr.ko driver.
The modem is supported by the Smartlink slamr
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For 2.6.24-21-generic compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1458:a002
IRQ=16
HDA=8086:27d8
SOFT=8086:27d8.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:27d8.
If another modem card is present, then most likely 8086:27d8 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Subsystem PCI_id 1458:a002
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.4
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Aug 25 17:32:09 UTC 2008 (Ubuntu 2.6.24-21.42-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1143MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4c00
[ 0.000000] Entering add_active_range(0, 0, 522224) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 522224
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 522224
[ 0.000000] On node 0 totalpages: 522224
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2287 pages used for memmap
[ 0.000000] HighMem zone: 290561 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6540 checksum 0
[ 0.000000] ACPI: RSDP 000F6540, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 7F7F3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: FACP 7F7F30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: DSDT 7F7F3180, 3844 (r1 GBT GBTUACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 7F7F0000, 0040
[ 0.000000] ACPI: HPET 7F7F6B00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
[ 0.000000] ACPI: MCFG 7F7F6B80, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: APIC 7F7F6A40, 0068 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: SSDT 7F7F6C00, 019E (r1 PmRef Cpu0Ist 3000 INTL 20040311)
[ 0.000000] ACPI: SSDT 7F7F7090, 0167 (r1 PmRef CpuPm 3000 INTL 20040311)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:70800000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518145
[ 0.000000] Kernel command line: root=UUID=ef7e7dcd-81f8-4be0-83f1-1d4503e9dd1b ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2200.011 MHz processor.
[ 17.059307] Console: colour VGA+ 80x25
[ 17.059310] console [tty0] enabled
[ 17.059524] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 17.059741] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.133239] Memory: 2058624k/2088896k available (2177k kernel code, 29028k reserved, 1006k data, 368k init, 1171392k highmem)
[ 17.133245] virtual kernel memory layout:
[ 17.133245] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 17.133246] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.133247] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 17.133248] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 17.133249] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 17.133249] .data : 0xc0320514 - 0xc041bdc4 (1006 kB)
[ 17.133250] .text : 0xc0100000 - 0xc0320514 (2177 kB)
[ 17.133253] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.133295] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 17.133414] hpet clockevent registered
[ 17.213340] Calibrating delay using timer specific routine.. 4403.37 BogoMIPS (lpj=8806741)
[ 17.213360] Security Framework initialized
[ 17.213365] SELinux: Disabled at boot.
[ 17.213378] AppArmor: AppArmor initialized
[ 17.213382] Failure registering capabilities with primary security module.
[ 17.213388] Mount-cache hash table entries: 512
[ 17.213502] Initializing cgroup subsys ns
[ 17.213506] Initializing cgroup subsys cpuacct
[ 17.213515] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 17.213521] monitor/mwait feature present.
[ 17.213522] using mwait in idle threads.
[ 17.213526] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 17.213528] CPU: L2 cache: 1024K
[ 17.213530] CPU: Physical Processor ID: 0
[ 17.213531] CPU: Processor Core ID: 0
[ 17.213532] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
[ 17.213540] Compat vDSO mapped to ffffe000.
[ 17.213550] Checking 'hlt' instruction... OK.
[ 17.229724] SMP alternatives: switching to UP code
[ 17.231070] Early unpacking initramfs... done
[ 17.504387] ACPI: Core revision 20070126
[ 17.504421] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.506227] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
[ 17.506241] SMP alternatives: switching to SMP code
[ 17.506840] Booting processor 1/1 eip 3000
[ 17.516893] Initializing CPU#1
[ 17.596958] Calibrating delay using timer specific routine.. 4400.00 BogoMIPS (lpj=8800005)
[ 17.596963] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 17.596967] monitor/mwait feature present.
[ 17.596970] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 17.596971] CPU: L2 cache: 1024K
[ 17.596973] CPU: Physical Processor ID: 0
[ 17.596974] CPU: Processor Core ID: 1
[ 17.596975] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
[ 17.597380] CPU1: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
[ 17.597397] Total of 2 processors activated (8803.37 BogoMIPS).
[ 17.597543] ENABLING IO-APIC IRQs
[ 17.597708] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.744908] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 17.764899] Brought up 2 CPUs
[ 17.764920] CPU0 attaching sched-domain:
[ 17.764922] domain 0: span 03
[ 17.764923] groups: 01 02
[ 17.764926] CPU1 attaching sched-domain:
[ 17.764927] domain 0: span 03
[ 17.764928] groups: 02 01
[ 17.765105] net_namespace: 64 bytes
[ 17.765115] Booting paravirtualized kernel on bare hardware
[ 17.765459] Time: 15:18:47 Date: 04/07/09
[ 17.765483] NET: Registered protocol family 16
[ 17.765627] EISA bus registered
[ 17.765631] ACPI: bus type pci registered
[ 17.771875] PCI: PCI BIOS revision 3.00 entry at 0xfaa50, last bus=3
[ 17.771877] PCI: Using configuration type 1
[ 17.771897] Setting up standard PCI resources
[ 17.773419] ACPI: EC: Look up EC in DSDT
[ 17.776622] ACPI: Interpreter enabled
[ 17.776624] ACPI: (supports S0 S1 S4 S5)
[ 17.776635] ACPI: Using IOAPIC for interrupt routing
[ 17.779750] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.780266] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 17.780270] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 17.780699] PCI: Transparent bridge - 0000:00:1e.0
[ 17.780723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.780825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 17.780876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 17.780933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 17.786754] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 17.786825] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 17.786894] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 17.786963] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 17.787032] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 17.787101] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 17.787171] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 17.787240] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 17.787337] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.787360] pnp: PnP ACPI init
[ 17.787366] ACPI: bus type pnp registered
[ 17.789134] pnpacpi: exceeded the max number of mem resources: 12
[ 17.789236] pnp: PnP ACPI: found 14 devices
[ 17.789238] ACPI: ACPI bus type pnp unregistered
[ 17.789242] PnPBIOS: Disabled by ACPI PNP
[ 17.789414] PCI: Using ACPI for IRQ routing
[ 17.789417] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.824853] NET: Registered protocol family 8
[ 17.824856] NET: Registered protocol family 20
[ 17.824903] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 17.824909] hpet0: 3 64-bit timers, 14318180 Hz
[ 17.825941] AppArmor: AppArmor Filesystem Enabled
[ 17.828793] Time: tsc clocksource has been installed.
[ 17.828808] Switched to high resolution mode on CPU 0
[ 17.828893] Switched to high resolution mode on CPU 1
[ 17.845813] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 17.845817] system 00:01: ioport range 0x290-0x29f has been reserved
[ 17.845821] system 00:01: ioport range 0x800-0x87f has been reserved
[ 17.845824] system 00:01: ioport range 0x290-0x294 has been reserved
[ 17.845828] system 00:01: ioport range 0x880-0x88f has been reserved
[ 17.845843] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 17.845852] system 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 17.845860] system 00:0c: iomem range 0xca800-0xcbfff has been reserved
[ 17.845864] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.845868] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.845872] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 17.845876] system 00:0c: iomem range 0x7f7f0000-0x7f7fffff could not be reserved
[ 17.845880] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 17.845884] system 00:0c: iomem range 0x100000-0x7f7effff could not be reserved
[ 17.845888] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 17.845892] system 00:0c: iomem range 0xfed13000-0xfed1dfff could not be reserved
[ 17.845895] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 17.845899] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 17.845903] system 00:0c: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 17.876226] PCI: Bridge: 0000:00:1c.0
[ 17.876229] IO window: 8000-8fff
[ 17.876233] MEM window: disabled.
[ 17.876236] PREFETCH window: disabled.
[ 17.876240] PCI: Bridge: 0000:00:1c.1
[ 17.876242] IO window: 9000-9fff
[ 17.876246] MEM window: e0000000-e1ffffff
[ 17.876249] PREFETCH window: 80000000-800fffff
[ 17.876253] PCI: Bridge: 0000:00:1e.0
[ 17.876256] IO window: a000-afff
[ 17.876259] MEM window: e2000000-e20fffff
[ 17.876262] PREFETCH window: disabled.
[ 17.876288] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.876293] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 17.876309] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 17.876313] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 17.876322] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 17.876331] NET: Registered protocol family 2
[ 17.913775] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.913995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.914448] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.914860] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.914862] TCP reno registered
[ 17.925886] checking if image is initramfs... it is
[ 18.463541] Freeing initrd memory: 7708k freed
[ 18.464186] audit: initializing netlink socket (disabled)
[ 18.464199] audit(1239117527.208:1): initialized
[ 18.464378] highmem bounce pool size: 64 pages
[ 18.465846] VFS: Disk quotas dquot_6.5.1
[ 18.465905] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.466015] io scheduler noop registered
[ 18.466017] io scheduler anticipatory registered
[ 18.466019] io scheduler deadline registered
[ 18.466027] io scheduler cfq registered (default)
[ 18.466039] Boot video device is 0000:00:02.0
[ 18.466183] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 18.466220] assign_interrupt_mode Found MSI capability
[ 18.466254] Allocate Port Service[0000:00:1c.0:pcie00]
[ 18.466282] Allocate Port Service[0000:00:1c.0:pcie02]
[ 18.466348] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 18.466385] assign_interrupt_mode Found MSI capability
[ 18.466414] Allocate Port Service[0000:00:1c.1:pcie00]
[ 18.466439] Allocate Port Service[0000:00:1c.1:pcie02]
[ 18.466622] isapnp: Scanning for PnP cards...
[ 18.819541] isapnp: No Plug & Play device found
[ 18.838682] Real Time Clock Driver v1.12ac
[ 18.838766] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.838875] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.839380] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.839546] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 18.839785] 0000:03:01.0: ttyS1 at I/O 0xa008 (irq = 18) is a 16450
[ 18.839920] 0000:03:01.0: ttyS2 at I/O 0xa010 (irq = 18) is a 8250
[ 18.840054] 0000:03:01.0: ttyS3 at I/O 0xa018 (irq = 18) is a 16450
[ 18.840094] Couldn't register serial port 0000:03:01.0: -28
[ 18.840560] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.840615] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.840695] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.841009] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.841015] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.867849] mice: PS/2 mouse device common for all mice
[ 18.867972] EISA: Probing bus 0 at eisa.0
[ 18.867996] Cannot allocate resource for EISA slot 8
[ 18.867998] EISA: Detected 0 cards.
[ 18.868000] cpuidle: using governor ladder
[ 18.868001] cpuidle: using governor menu
[ 18.868071] NET: Registered protocol family 1
[ 18.868096] Using IPI No-Shortcut mode
[ 18.868121] registered taskstats version 1
[ 18.868196] Magic number: 5:374:335
[ 18.868206] hash matches device ttyza
[ 18.868244] hash matches device tty56
[ 18.868264] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.868265] EDD information not available.
[ 18.868400] Freeing unused kernel memory: 368k freed
[ 18.890858] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 20.046682] fuse init (API version 7.9)
[ 20.062923] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 20.063021] ACPI: SSDT 7F7F7000, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 20.063122] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 20.206478] usbcore: registered new interface driver usbfs
[ 20.206499] usbcore: registered new interface driver hub
[ 20.208475] usbcore: registered new device driver usb
[ 20.209828] USB Universal Host Controller Interface driver v3.0
[ 20.209888] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 20.209898] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.209902] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.210098] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 20.210127] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000b000
[ 20.210245] usb usb1: configuration #1 chosen from 1 choice
[ 20.210265] hub 1-0:1.0: USB hub found
[ 20.210269] hub 1-0:1.0: 2 ports detected
[ 20.314341] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[ 20.314351] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.314355] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.314374] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 20.314400] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b400
[ 20.314496] usb usb2: configuration #1 chosen from 1 choice
[ 20.314514] hub 2-0:1.0: USB hub found
[ 20.314518] hub 2-0:1.0: 2 ports detected
[ 20.407504] SCSI subsystem initialized
[ 20.418240] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 20.418250] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.418254] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.418276] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 20.418304] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000b800
[ 20.418400] usb usb3: configuration #1 chosen from 1 choice
[ 20.418418] hub 3-0:1.0: USB hub found
[ 20.418422] hub 3-0:1.0: 2 ports detected
[ 20.444488] libata version 3.00 loaded.
[ 20.522108] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 20.522119] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.522123] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.522141] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 20.522168] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 20.522254] usb usb4: configuration #1 chosen from 1 choice
[ 20.522272] hub 4-0:1.0: USB hub found
[ 20.522276] hub 4-0:1.0: 2 ports detected
[ 20.626031] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 20.626057] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 20.626074] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 20.626345] eth0: RTL8101e at 0xf8846000, 00:1f:d0:f3:4b:7f, XID 34200000 IRQ 221
[ 20.629230] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[ 20.629261] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 20.629271] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 20.631924] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 20.631936] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.631939] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.631969] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 20.635877] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 20.635884] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe21c4000
[ 20.654894] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 20.666877] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.666974] usb usb5: configuration #1 chosen from 1 choice
[ 20.666993] hub 5-0:1.0: USB hub found
[ 20.666998] hub 5-0:1.0: 8 ports detected
[ 20.770862] ata_piix 0000:00:1f.2: version 2.12
[ 20.770869] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 20.770889] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[ 20.770922] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 20.770992] scsi0 : ata_piix
[ 20.771032] scsi1 : ata_piix
[ 20.771466] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 20.771468] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 20.941798] ata1.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[ 20.941804] ata1.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7
[ 20.941807] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 20.949904] ata1.00: configured for UDMA/133
[ 21.009535] usb 5-3: new high speed USB device using ehci_hcd and address 2
[ 21.145063] usb 5-3: configuration #1 chosen from 1 choice
[ 21.155589] usbcore: registered new interface driver libusual
[ 21.159516] Initializing USB Mass Storage driver...
[ 21.159572] scsi2 : SCSI emulation for USB Mass Storage devices
[ 21.159624] usbcore: registered new interface driver usb-storage
[ 21.159626] USB Mass Storage support registered.
[ 21.159708] usb-storage: device found at 2
[ 21.159709] usb-storage: waiting for device to settle before scanning
[ 21.269603] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB02, max UDMA/66
[ 21.269616] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 21.441367] ata2.00: configured for UDMA/33
[ 21.441477] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 21.442176] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB02 PQ: 0 ANSI: 5
[ 21.450299] Driver 'sd' needs updating - please use bus_type methods
[ 21.450370] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 21.450380] sd 0:0:0:0: [sda] Write Protect is off
[ 21.450382] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.450395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.450437] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 21.450445] sd 0:0:0:0: [sda] Write Protect is off
[ 21.450447] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.450459] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.450462] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 21.459827] sda1 sda2 < sda5 >
[ 21.481893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.485997] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.486016] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 21.486553] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.486558] Uniform CD-ROM driver Revision: 3.20
[ 21.486602] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 21.653697] Attempting manual resume
[ 21.653700] swsusp: Resume From Partition 8:5
[ 21.653701] PM: Checking swsusp image.
[ 21.653859] PM: Resume from disk failed.
[ 21.694069] kjournald starting. Commit interval 5 seconds
[ 21.694078] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.677823] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 25.694376] Linux agpgart interface v0.102
[ 25.723483] intel_rng: FWH not detected
[ 25.785700] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.813706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.850991] agpgart: Detected an Intel 945G Chipset.
[ 25.851424] agpgart: Detected 7932K stolen memory.
[ 25.866539] agpgart: AGP aperture is 256M @ 0xd0000000
[ 25.901532] iTCO_vendor_support: vendor-support=0
[ 25.913526] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 25.968963] input: Power Button (FF) as /devices/virtual/input/input3
[ 26.006668] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 26.028394] ACPI: Power Button (FF) [PWRF]
[ 26.028457] input: Power Button (CM) as /devices/virtual/input/input5
[ 26.095747] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 26.095778] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 26.095830] parport_pc 00:07: reported by Plug and Play ACPI
[ 26.095884] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 26.156274] ACPI: Power Button (CM) [PWRB]
[ 26.177723] usb-storage: device scan complete
[ 26.178470] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0
[ 26.183464] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0
[ 26.189204] scsi 2:0:0:2: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0
[ 26.190053] scsi 2:0:0:3: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0
[ 26.192337] scsi 2:0:0:4: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0
[ 26.202442] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 26.202483] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 26.203535] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 26.203569] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 26.204649] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 26.204677] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ 26.205778] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 26.205809] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ 26.206894] sd 2:0:0:4: [sdf] Attached SCSI removable disk
[ 26.206921] sd 2:0:0:4: Attached scsi generic sg6 type 0
[ 26.434440] udev: renamed network interface eth0 to eth1
[ 26.641387] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.641407] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 26.673556] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 27.638665] lp0: using parport0 (interrupt-driven).
[ 27.673216] Adding 6056464k swap on /dev/sda5. Priority:-1 extents:1 across:6056464k
[ 28.208493] EXT3 FS on sda1, internal journal
[ 29.281235] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.579941] PPP generic driver version 2.4.2
[ 29.599478] NET: Registered protocol family 17
[ 29.629116] NET: Registered protocol family 10
[ 29.629329] lo: Disabled Privacy Extensions
[ 29.970003] No dock devices found.
[ 30.973133] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 30.973138] apm: disabled - APM is not SMP safe.
[ 31.087135] ppdev: user-space parallel port driver
[ 31.201805] audit(1239117539.612:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5008 profile="/usr/sbin/cupsd" namespace="default"
[ 33.221980] r8169: eth1: link up
[ 33.221992] r8169: eth1: link up
[ 33.310294] Bluetooth: Core ver 2.11
[ 33.310404] NET: Registered protocol family 31
[ 33.310407] Bluetooth: HCI device and connection manager initialized
[ 33.310411] Bluetooth: HCI socket layer initialized
[ 33.336670] Bluetooth: L2CAP ver 2.9
[ 33.336677] Bluetooth: L2CAP socket layer initialized
[ 33.419620] Bluetooth: RFCOMM socket layer initialized
[ 33.419635] Bluetooth: RFCOMM TTY layer initialized
[ 33.419638] Bluetooth: RFCOMM ver 1.8
[ 35.575336] [drm] Initialized drm 1.1.0 20060810
[ 35.578161] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.578173] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 35.578250] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 51.170473] eth1: no IPv6 routers present
[ 3079.351642] r8169: eth1: link up
[ 3083.164441] r8169: eth1: link up
[ 3084.271412] r8169: eth1: link up
[ 3085.444182] r8169: eth1: link up
[ 3100.110111] eth1: no IPv6 routers present
