Hooman, Put in your install C, and $ sudo apt-get install linux-headers-2.6.27.-7- generic Should that fail, go to http://packages.ubuntu.com/ Search for linux-headers-2.6.27-7- generic, which will lead to: http://packages.ubuntu.com/search?keywords=linux-headers-2.6.27-7-+generic&searchon=names&suite=intrepid§ion=all You will need to download both linux-headers-2.6.27-7-generic and its dependent package linux-headers-2.6.27-7. Under Linux, both can be coinstalled by: $ sudo dpkg -i linux*.deb Once these packages are installed, try the hsfmodem compile again. It may prove necessary to also install a package libc6-dev MarvS On Mon, Dec 8, 2008 at 11:12 PM, Hooman Tadbiri <hooman.tadbiri@xxxxxxxxx> wrote: > I got hsfmodem_7.68.00.09oem_i386.deb, but during installation I got this: > ################################################################ > (Reading database ... 101709 files and directories currently installed.) > Preparing to replace hsfmodem 7.68.00.09oem (using > hsfmodem_7.68.00.09oem_i386.deb) ... > Unpacking replacement hsfmodem ... > Setting up hsfmodem (7.68.00.09oem) ... > Conexant HSF softmodem driver, version 7.68.00.09oem > > If you need assistance or more information, please go to: > http://www.linuxant.com/ > > When reporting a problem for the first time, please send > us the file generated by "hsfconfig --dumpdiag". > > No pre-built modules for: Ubuntu-8.10 linux-2.6.27-7-generic i686-SMP > > Trying to automatically build the driver modules... > (this requires a C compiler and proper kernel sources to be installed) > > Building modules for kernel 2.6.27-7-generic, using source directory > /lib/modules/2.6.27-7-generic/build. Please wait... > > ERROR: Module build failed! > Please examine the log file "/tmp/hsfconfig-buildlog.txt" to determine why. > ################################################################ > hsfconfig-buildlog.txt is attached. > I couldn't get "linux-headers-2.6.27.-7- generic" because there is no > package with exactly with that name and there are a lot of packages > with similar names! And each one needs a lot of other packages to be > installed. So please tell me what should I exactly get and from where. > Thanks a lot for your helps. > On 12/8/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >> Hooman, >> >> 10b9:5457 : ALi Corporation M5457 AC'97 Modem Controller >> 104d:8158 Subsystem having Conexant chip >> >> is an older modem and may not need the newest HSF modem code from Linuxant. >> >> From http://linux.dell.com/files/ubuntu/hardy/modem-drivers/hsf/ download >> hsfmodem_7.68.00.09oem_i386.deb >> >> Before trying to use it, first uninstall the current 14.4 limited drivers: >> $ hsfconfiig --uninstall >> >> >> Reboot. Then do the new install: >> $ sudo dpkg -i hsfmodem_7.68.00.09oem_i386.deb >> There may be a failure if resources needed for compiling have not been >> fully installed: >> make, gcc-4.3, linux-headers-2.6.27.-7- generic >> But if success, reboot and retest the modem as before with pon >> >> wvdial can be stopped in the console it was started by >> $ Ctrl-C >> >> MarvS >> >> >> >> >> >> >> >> On Sun, Dec 7, 2008 at 10:21 AM, Hooman Tadbiri >> <hooman.tadbiri@xxxxxxxxx> wrote: >>> I used it under kubuntu; wvdial didn't work, but I got connected using >>> pon/poff. Thanks a lot for that! >>> Now, is there any way to reach the 14.4 limit? >>> By the way: wvdial started its job and it was repeating the connecting >>> process every minute! I couldn't stop it, and I restarted the >>> computer! How could I turn the wvdial off, without restarting? >>> Really thanks, again! Even this 14.4 is better than nothing! Thanks a >>> lot for your helps. >>> >>> On Sat, Dec 6, 2008 at 8:51 PM, Marvin Stodolsky >>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>> Hooman, >>>> >>>> test the drivers at 14.4Kbps >>>> It they can be made to work on your System >>>> we can solve the rest of the problems >>>> >>>> marvS >>>> >>>> On 12/5/08, Hooman Tadbiri <hooman.tadbiri@xxxxxxxxx> wrote: >>>>> Thanks, but there will be a very big problem! Linuxant says that there >>>>> is a 14.4Kbps limit for free drivers. Should only I use this? What can >>>>> I do? Is there any cracks available for this driver? >>>>> (+because of global sanctions against Iran I can't pay any money to >>>>> foreign companies) >>>>> Thank you, >>>>> Hooman. >>>>> >>>>> On Fri, Dec 5, 2008 at 10:55 PM, Marvin Stodolsky >>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>> > Hooman >>>>> > >>>>> > for 10b9:5451 Multimedia audio controller: ALi Corporation M5451 PCI >>>>> > AC-Link Controller Audio Device >>>>> > with subsystem 104d:8158 having a Conexant modem chip, >>>>> > >>>>> > Get hsfmodem_7.68.00.14full_k2.6.27_7_generic_ubuntu_i386.deb.zip >>>>> > from http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>> > >>>>> > Under Linux >>>>> > $ unzip hsf*.zip >>>>> > to unpack, and to install >>>>> > $ sudo dpkg -i hsf*.deb >>>>> > >>>>> > Afterwards reboot, and check for basic modem recognition with: >>>>> > $ sudo wvdialconf /etc/wvdial.conf >>>>> > >>>>> > If the modem is detected, put in personal info with >>>>> > $ sudo gedit /etc/wvdial.conf >>>>> > while removing the symbols ; < > >>>>> > Save and try a dialout with: >>>>> > >>>>> > $ sudo wvdial >>>>> > >>>>> > MarvS >>>>> > >>>>> > >>>>> > >>>>> > On Fri, Dec 5, 2008 at 10:27 AM, Hooman Tadbiri >>>>> > <hooman.tadbiri@xxxxxxxxx> wrote: >>>>> >> I typed them below, please see: >>>>> >> ->General: >>>>> >> SoftK56 Data Fax CARP >>>>> >> Device rype: Medems >>>>> >> Manufacturer: CXT >>>>> >> Location: PCI bus 0, device 3, function 0 >>>>> >> ->Diagnostics: >>>>> >> Modem Information >>>>> >> (Field> Value) >>>>> >> Hardware ID> PCI\VEN_10B9&DEV_5457&SUBSYS_8158104D&REV_00 >>>>> >> >Query Modem: >>>>> >> (Command> Response) >>>>> >> ATQ0V1E0> Success >>>>> >> AT+GMM> +GMM: SoftK56 Data Fax CARP >>>>> >> AT+FCLASS=?> 0,1 >>>>> >> AT#CLS=?> COMMAND NOT SUPPORTED >>>>> >> AT+GCI?> +GCI: B4 >>>>> >> AT+GCI=?> +GCI: >>>>> >> (B5,0A,0F,20,26,2E,31,3C,3D,04,46,50,51,52,53,54,57,58,59,00,61,69,6C,73,7B,7E,82,89,89,8B,9C,9F,A0,A5,A6,FE,A9,B4,09,AE,8A,B3,B8,FC,1B,FA,FB,07,0D,14,16,1A,25,27,2B,2D,33,35,36,37,49,4E,62,4F,63,68,1C,88,98,84,85,87,8E,A1,B7,BB,BC,B2,F8,70,0C,8C,6A) >>>>> >> ATI1> 255 >>>>> >> ATI2> Success >>>>> >> ATI3> SoftK56V B2.1 V6.01.20 >>>>> >> ATI4> SoftK56 Data Fax CARP >>>>> >> ATI5> 180 >>>>> >> ATI6> SoftK56 >>>>> >> > CModem Version 12 >>>>> >> > RKsample Version 342 >>>>> >> ATI7> 225 >>>>> >> ->Driver >>>>> >> SoftK56 Data Fax CARP >>>>> >> Driver Provider: CXT >>>>> >> Driver Date: 20/03/2003 >>>>> >> Driver Version: 6.1.20.0 >>>>> >> Digital Signer: Microsoft Windows Hardware Campatibility Publisher >>>>> >> >Driver Details...: >>>>> >> SoftK56 Date Fax CARP >>>>> >> Driver files: >>>>> >> C:\Program >>>>> >> Files\CONEXANT\CNXT_MODEM_PCI_VEN_10B9&DEV_5457&SUBSYS_8158104D\HXFSetup.exe >>>>> >> C:\WINDOWS\system32\carpdll.dll >>>>> >> C:\WINDOWS\system32\carpserv.exe >>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\HSF_CNXT.sys >>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\HSF_DP.sys >>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\HSFHWALI.sys >>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\mdmxsdk.sys >>>>> >> C:\WINDOWS\system32\drivers\Modem.sys >>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\Snyunif.cty >>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\strmdisp.sys >>>>> >> C:\WINDOWS\system32\HSFCI005.dll >>>>> >> C:\WINDOWS\system32\mdmxsdk.dll >>>>> >> Provider: Conexant Systems, Inc. >>>>> >> File version: 2.0.0.0 >>>>> >> Copyright: Copyright(c) Conexant Systems, Inc. 2002 >>>>> >> Digital Signer: Microsoft Windows Hardware Campatibility >>>>> >> >>>>> >> Now, please tell me what to do. >>>>> >> Thanks a lot for your helps. >>>>> >> Hooman. >>>>> >> >>>>> >> On Fri, Dec 5, 2008 at 8:21 AM, Marvin Stodolsky >>>>> >> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>> >>> Hooman >>>>> >>> Please Subscribe to the List through the SUBSCRIBE link at >>>>> >>> www.linmodems.org >>>>> >>> so that your messages to not have to be manually forwarded. >>>>> >>> >>>>> >>> >>>>> >>> Using MicroSoft(MS) Windows diagnostics: >>>>> >>> ----------------------------- >>>>> >>> MS installations do generally have adequate diagostic capability. >>>>> >>> Try >>>>> >>> the following >>>>> >>> routine 1), beginning with mouse clicks on: >>>>> >>> 1) Start > Settings > Control Panel > Classical View (for Window >>>>> >>> XP) > System >>>>> >>>> Hardware > Device Manager > Modems > Click on the + > Modem. Double >>>>> >>>> click to >>>>> >>> expand the graphic. Manufacturer information may be displayed. For >>>>> >>> example, CXT >>>>> >>> stands for Conexant. Click the Diagnostics Tab. Record any hardware >>>>> >>> ID >>>>> >>> or vendor >>>>> >>> and device information. >>>>> >>> Next do the Query Modem and record the ATI specifications displayed >>>>> >>> such as: >>>>> >>> ATI3 - Agere SoftModem Version 2.1.22 >>>>> >>> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >>>>> >>> >>>>> >>> Also Click on the Driver Details TAB, and copy out the information >>>>> >>> therein. >>>>> >>> >>>>> >>> Send the information thus acquired to the List, not directly to me. >>>>> >>> . >>>>> >>> MarvS >>>>> >>> >>>>> >>> >>>>> >>> >>>>> >>> On Thu, Dec 4, 2008 at 12:59 PM, Hooman Tadbiri >>>>> >>> <hooman.tadbiri@xxxxxxxxx> wrote: >>>>> >>>> There is no softModem in Modem/DOCs! There is only YourSystem.txt >>>>> >>>> there. Everything is attached, You can see it! What should I do?! >>>>> >>>> Thanks. >>>>> >>>> >>>>> >>>> On Thu, Dec 4, 2008 at 11:07 PM, Marvin Stodolsky >>>>> >>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>> >>>>> It should be in the folder Modem/DOC/ >>>>> >>>>> NOT BEING under Linux now, I can access your attachment >>>>> >>>>> >>>>> >>>>> MarvS >>>>> >>>>> >>>>> >>>>> On Thu, Dec 4, 2008 at 8:30 AM, Hooman Tadbiri >>>>> >>>>> <hooman.tadbiri@xxxxxxxxx> wrote: >>>>> >>>>>> Thank you for the answer, but I can't find the SoftModem.txt >>>>> >>>>>> file; >>>>> >>>>>> please tell me where to find it. Here I attached all the files >>>>> >>>>>> scanModem generated, please visit. >>>>> >>>>>> (+By the way this may help: I'm using an old Sony laptop >>>>> >>>>>> computer) >>>>> >>>>>> Thanks, >>>>> >>>>>> Hooman. >>>>> >>>>>> >>>>> >>>>>> On 12/4/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>>> >>>>>>> Hooman, >>>>> >>>>>>> >>>>> >>>>>>> Following the instructions in SoftModem.txt >>>>> >>>>>>> run the modem disgnostics under Microsoft. >>>>> >>>>>>> It is desirable to first determine if your modem has a Conexant >>>>> >>>>>>> chip. >>>>> >>>>>>> >>>>> >>>>>>> MarvS >>>>> >>>>>>> >>>>> >>>>>>> On Wed, Dec 3, 2008 at 1:28 PM, Hooman Tadbiri >>>>> >>>>>>> <hooman.tadbiri@xxxxxxxxx> >>>>> >>>>>>> wrote: >>>>> >>>>>>>> To whom it may concern, >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> I had used scanModem several times on several computers and I >>>>> >>>>>>>> have >>>>> >>>>>>>> never got such messages like these: >>>>> >>>>>>>> >>>>> >>>>>>>> ####################Linux Terminal#################### >>>>> >>>>>>>> hooman@hooman-laptop:~/Desktop$ sudo ./scanModem >>>>> >>>>>>>> >>>>> >>>>>>>> [sudo] password for hooman: >>>>> >>>>>>>> >>>>> >>>>>>>> UPDATE=2008_11_06 >>>>> >>>>>>>> >>>>> >>>>>>>> There are weekly updates of scanModem. Your copy is more than >>>>> >>>>>>>> >>>>> >>>>>>>> 4 weeks old!! >>>>> >>>>>>>> >>>>> >>>>>>>> If decisive guidance is not provided by this scanModem of >>>>> >>>>>>>> 2008_11_06, >>>>> >>>>>>>> >>>>> >>>>>>>> download an update from http://linmodems.technion.ac.il >>>>> >>>>>>>> >>>>> >>>>>>>> Continuing in 10 seconds. >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> Identifying PCI bus slots with candidate modems. >>>>> >>>>>>>> >>>>> >>>>>>>> Running PCIbus cases >>>>> >>>>>>>> >>>>> >>>>>>>> Analysing card in PCI bus 00:03.0, writing to scanout.00:03.0 >>>>> >>>>>>>> >>>>> >>>>>>>> Please load the candidate driver slamr, with Admin/root >>>>> >>>>>>>> command: >>>>> >>>>>>>> >>>>> >>>>>>>> sudo modprobe slamr >>>>> >>>>>>>> >>>>> >>>>>>>> Then rerun >>>>> >>>>>>>> >>>>> >>>>>>>> ./scanModem >>>>> >>>>>>>> >>>>> >>>>>>>> hooman@hooman-laptop:~/Desktop$ sudo modprobe slamr >>>>> >>>>>>>> >>>>> >>>>>>>> FATAL: Module slamr not found. >>>>> >>>>>>>> ####################ModemDate.txt#################### >>>>> >>>>>>>> Only plain text email is forwarded by the >>>>> >>>>>>>> Discuss@xxxxxxxxxxxxx List >>>>> >>>>>>>> Server, >>>>> >>>>>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>> >>>>>>>> YourName, YourCountry kernel 2.6.27-7-generic >>>>> >>>>>>>> With this Subject Line cogent experts will be alerted, and >>>>> >>>>>>>> useful >>>>> >>>>>>>> case names left in the Archive. >>>>> >>>>>>>> YourCountry will enable Country specific guidance. Linux >>>>> >>>>>>>> experts in >>>>> >>>>>>>> YourCountry >>>>> >>>>>>>> can be found through: http://www.linux.org/groups/index.html. >>>>> >>>>>>>> They will know your Country's modem code, which may be >>>>> >>>>>>>> essential for >>>>> >>>>>>>> dialup service. >>>>> >>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by >>>>> >>>>>>>> an >>>>> >>>>>>>> Internet Provider mail filters. >>>>> >>>>>>>> So in a day, also check the Archived responses at >>>>> >>>>>>>> http://www.linmodems.org >>>>> >>>>>>>> -------------------------- System information >>>>> >>>>>>>> ---------------------------- >>>>> >>>>>>>> CPU=i686, >>>>> >>>>>>>> Linux version 2.6.27-7-generic (buildd@rothera) (gcc version >>>>> >>>>>>>> 4.3.2 >>>>> >>>>>>>> (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 >>>>> >>>>>>>> scanModem update of: 2008_11_06 >>>>> >>>>>>>> >>>>> >>>>>>>> There are no blacklisted modem drivers in /etc/modprobe* >>>>> >>>>>>>> files >>>>> >>>>>>>> Attached USB devices are: >>>>> >>>>>>>> ID 126f:0163 TwinMOS >>>>> >>>>>>>> ID 1d6b:0002 Linux Foundation 2.0 root hub >>>>> >>>>>>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>> >>>>>>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>> >>>>>>>> >>>>> >>>>>>>> USB modems not recognized >>>>> >>>>>>>> >>>>> >>>>>>>> For candidate card in slot 00:03.0, firmware information and >>>>> >>>>>>>> bootup >>>>> >>>>>>>> diagnostics are: >>>>> >>>>>>>> PCI slot PCI ID SubsystemID Name >>>>> >>>>>>>> ---------- --------- --------- -------------- >>>>> >>>>>>>> 00:03.0 10b9:5457 104d:8158 Modem: ALi Corporation M5457 AC'97 >>>>> >>>>>>>> Modem >>>>> >>>>>>>> Controller >>>>> >>>>>>>> >>>>> >>>>>>>> Modem interrupt assignment and sharing: >>>>> >>>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI >>>>> >>>>>>>> 5451, >>>>> >>>>>>>> sonypi, eth0 >>>>> >>>>>>>> --- Bootup diagnostics for card in PCI slot 00:03.0 ---- >>>>> >>>>>>>> [ 0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000, >>>>> >>>>>>>> e0400fff] >>>>> >>>>>>>> [ 0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff] >>>>> >>>>>>>> [ 0.421142] pci 0000:00:03.0: PME# supported from D3hot >>>>> >>>>>>>> D3cold >>>>> >>>>>>>> [ 0.421147] pci 0000:00:03.0: PME# disabled >>>>> >>>>>>>> [ 1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> >>>>> >>>>>>>> GSI 11 >>>>> >>>>>>>> (level, low) -> IRQ 11 >>>>> >>>>>>>> [ 1.671508] serial 0000:00:03.0: PCI INT A disabled >>>>> >>>>>>>> >>>>> >>>>>>>> The PCI slot 00:03.0 of the modem card may be disabled early >>>>> >>>>>>>> in >>>>> >>>>>>>> a bootup process, but then enabled later. If modem drivers >>>>> >>>>>>>> load >>>>> >>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about >>>>> >>>>>>>> possible >>>>> >>>>>>>> fixes. >>>>> >>>>>>>> Send dmesg.txt along with ModemData.txt to >>>>> >>>>>>>> discuss@xxxxxxxxxxxxx >>>>> >>>>>>>> if help is needed. >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> For candidate card in slot 00:04.0, firmware information and >>>>> >>>>>>>> bootup >>>>> >>>>>>>> diagnostics are: >>>>> >>>>>>>> PCI slot PCI ID SubsystemID Name >>>>> >>>>>>>> ---------- --------- --------- -------------- >>>>> >>>>>>>> 00:04.0 10b9:5451 104d:8158 Multimedia audio controller: ALi >>>>> >>>>>>>> Corporation M5451 PCI AC-Link Controller Audio Device >>>>> >>>>>>>> >>>>> >>>>>>>> Modem interrupt assignment and sharing: >>>>> >>>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI >>>>> >>>>>>>> 5451, >>>>> >>>>>>>> sonypi, eth0 >>>>> >>>>>>>> --- Bootup diagnostics for card in PCI slot 00:04.0 ---- >>>>> >>>>>>>> [ 0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff] >>>>> >>>>>>>> [ 0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000, >>>>> >>>>>>>> e0401fff] >>>>> >>>>>>>> [ 0.421204] pci 0000:00:04.0: supports D1 >>>>> >>>>>>>> [ 0.421206] pci 0000:00:04.0: supports D2 >>>>> >>>>>>>> [ 0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot >>>>> >>>>>>>> D3cold >>>>> >>>>>>>> [ 0.421212] pci 0000:00:04.0: PME# disabled >>>>> >>>>>>>> [ 16.216264] ALI 5451 0000:00:04.0: power state changed by >>>>> >>>>>>>> ACPI to D0 >>>>> >>>>>>>> [ 16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] >>>>> >>>>>>>> -> GSI >>>>> >>>>>>>> 11 (level, low) -> IRQ 11 >>>>> >>>>>>>> >>>>> >>>>>>>> The PCI slot 00:04.0 of the modem card may be disabled early >>>>> >>>>>>>> in >>>>> >>>>>>>> a bootup process, but then enabled later. If modem drivers >>>>> >>>>>>>> load >>>>> >>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about >>>>> >>>>>>>> possible >>>>> >>>>>>>> fixes. >>>>> >>>>>>>> Send dmesg.txt along with ModemData.txt to >>>>> >>>>>>>> discuss@xxxxxxxxxxxxx >>>>> >>>>>>>> if help is needed. >>>>> >>>>>>>> ####################dmesg.txt#################### >>>>> >>>>>>>> CPU0 >>>>> >>>>>>>> 0: 19627 XT-PIC-XT timer >>>>> >>>>>>>> 1: 466 XT-PIC-XT i8042 >>>>> >>>>>>>> 2: 0 XT-PIC-XT cascade >>>>> >>>>>>>> 3: 2 XT-PIC-XT >>>>> >>>>>>>> 5: 2 XT-PIC-XT >>>>> >>>>>>>> 7: 3 XT-PIC-XT parport0 >>>>> >>>>>>>> 8: 2 XT-PIC-XT rtc0 >>>>> >>>>>>>> 9: 996 XT-PIC-XT acpi >>>>> >>>>>>>> 10: 12650 XT-PIC-XT ohci1394, uhci_hcd:usb2, >>>>> >>>>>>>> ehci_hcd:usb3, yenta, radeon@pci:0000:01:05.0 >>>>> >>>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI >>>>> >>>>>>>> 5451, >>>>> >>>>>>>> sonypi, eth0 >>>>> >>>>>>>> 12: 5615 XT-PIC-XT i8042 >>>>> >>>>>>>> 14: 8703 XT-PIC-XT pata_ali >>>>> >>>>>>>> 15: 1971 XT-PIC-XT pata_ali >>>>> >>>>>>>> NMI: 0 Non-maskable interrupts >>>>> >>>>>>>> LOC: 0 Local timer interrupts >>>>> >>>>>>>> RES: 0 Rescheduling interrupts >>>>> >>>>>>>> CAL: 0 function call interrupts >>>>> >>>>>>>> TLB: 0 TLB shootdowns >>>>> >>>>>>>> SPU: 0 Spurious interrupts >>>>> >>>>>>>> ERR: 0 >>>>> >>>>>>>> MIS: 0 >>>>> >>>>>>>> >>>>> >>>>>>>> [ 0.000000] Initializing cgroup subsys cpuset >>>>> >>>>>>>> [ 0.000000] Initializing cgroup subsys cpu >>>>> >>>>>>>> [ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) >>>>> >>>>>>>> (gcc >>>>> >>>>>>>> version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 >>>>> >>>>>>>> 06:42:44 >>>>> >>>>>>>> UTC 2008 (Ubuntu 2.6.27-7.14-generic) >>>>> >>>>>>>> [ 0.000000] BIOS-provided physical RAM map: >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 >>>>> >>>>>>>> (usable) >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 >>>>> >>>>>>>> (reserved) >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 >>>>> >>>>>>>> (reserved) >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000 >>>>> >>>>>>>> (usable) >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7c000 >>>>> >>>>>>>> (ACPI data) >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000001bf7c000 - 000000001bf80000 >>>>> >>>>>>>> (ACPI NVS) >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 >>>>> >>>>>>>> (reserved) >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 >>>>> >>>>>>>> (reserved) >>>>> >>>>>>>> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 >>>>> >>>>>>>> (reserved) >>>>> >>>>>>>> [ 0.000000] last_pfn = 0x1bf70 max_arch_pfn = 0x100000 >>>>> >>>>>>>> [ 0.000000] kernel direct mapping tables up to 1bf70000 @ >>>>> >>>>>>>> 7000-d000 >>>>> >>>>>>>> [ 0.000000] RAMDISK: 1b792000 - 1bf5f052 >>>>> >>>>>>>> [ 0.000000] DMI present. >>>>> >>>>>>>> [ 0.000000] ACPI: RSDP 000F6FD0, 0014 (r0 PTLTD ) >>>>> >>>>>>>> [ 0.000000] ACPI: RSDT 1BF773FE, 002C (r1 SONY K7 >>>>> >>>>>>>> 6040000 >>>>> >>>>>>>> LTP 0) >>>>> >>>>>>>> [ 0.000000] ACPI: FACP 1BF7BF64, 0074 (r1 SONY K7 >>>>> >>>>>>>> 6040000 >>>>> >>>>>>>> PTL F4240) >>>>> >>>>>>>> [ 0.000000] ACPI: DSDT 1BF7742A, 4B3A (r1 SONY K7 >>>>> >>>>>>>> 6040000 >>>>> >>>>>>>> MSFT 100000E) >>>>> >>>>>>>> [ 0.000000] ACPI: FACS 1BF7CFC0, 0040 >>>>> >>>>>>>> [ 0.000000] ACPI: BOOT 1BF7BFD8, 0028 (r1 PTLTD $SBFTBL$ >>>>> >>>>>>>> 6040000 >>>>> >>>>>>>> LTP 1) >>>>> >>>>>>>> [ 0.000000] ACPI: DMI detected: Sony >>>>> >>>>>>>> [ 0.000000] 0MB HIGHMEM available. >>>>> >>>>>>>> [ 0.000000] 447MB LOWMEM available. >>>>> >>>>>>>> [ 0.000000] mapped low ram: 0 - 1bf70000 >>>>> >>>>>>>> [ 0.000000] low ram: 00000000 - 1bf70000 >>>>> >>>>>>>> [ 0.000000] bootmap 00002000 - 000057f0 >>>>> >>>>>>>> [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - >>>>> >>>>>>>> 001bf70000] >>>>> >>>>>>>> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [0000000000 - 0000001000] >>>>> >>>>>>>> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [0000001000 - 0000002000] >>>>> >>>>>>>> [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [0000006000 - 0000007000] >>>>> >>>>>>>> [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [0000100000 - 00005c0a20] >>>>> >>>>>>>> [ 0.000000] #4 [001b792000 - 001bf5f052] RAMDISK >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [001b792000 - 001bf5f052] >>>>> >>>>>>>> [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [00005c1000 - 00005c4000] >>>>> >>>>>>>> [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [000009f800 - 0000100000] >>>>> >>>>>>>> [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [0000007000 - 0000009000] >>>>> >>>>>>>> [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP >>>>> >>>>>>>> ==> >>>>> >>>>>>>> [0000002000 - 0000006000] >>>>> >>>>>>>> [ 0.000000] Zone PFN ranges: >>>>> >>>>>>>> [ 0.000000] DMA 0x00000000 -> 0x00001000 >>>>> >>>>>>>> [ 0.000000] Normal 0x00001000 -> 0x0001bf70 >>>>> >>>>>>>> [ 0.000000] HighMem 0x0001bf70 -> 0x0001bf70 >>>>> >>>>>>>> [ 0.000000] Movable zone start PFN for each node >>>>> >>>>>>>> [ 0.000000] early_node_map[2] active PFN ranges >>>>> >>>>>>>> [ 0.000000] 0: 0x00000000 -> 0x0000009f >>>>> >>>>>>>> [ 0.000000] 0: 0x00000100 -> 0x0001bf70 >>>>> >>>>>>>> [ 0.000000] On node 0 totalpages: 114447 >>>>> >>>>>>>> [ 0.000000] free_area_init_node: node 0, pgdat c048a500, >>>>> >>>>>>>> node_mem_map c1000000 >>>>> >>>>>>>> [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 >>>>> >>>>>>>> [ 0.000000] Normal zone: 109477 pages, LIFO batch:31 >>>>> >>>>>>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 >>>>> >>>>>>>> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs >>>>> >>>>>>>> [ 0.000000] Local APIC disabled by BIOS -- you can enable it >>>>> >>>>>>>> with >>>>> >>>>>>>> "lapic" >>>>> >>>>>>>> [ 0.000000] mapped APIC to ffffb000 (013f2000) >>>>> >>>>>>>> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - >>>>> >>>>>>>> 00000000000a0000 >>>>> >>>>>>>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - >>>>> >>>>>>>> 00000000000dc000 >>>>> >>>>>>>> [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - >>>>> >>>>>>>> 0000000000100000 >>>>> >>>>>>>> [ 0.000000] Allocating PCI resources starting at 30000000 >>>>> >>>>>>>> (gap: >>>>> >>>>>>>> 2c000000:d3f80000) >>>>> >>>>>>>> [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data >>>>> >>>>>>>> [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 >>>>> >>>>>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility >>>>> >>>>>>>> grouping on. >>>>> >>>>>>>> Total pages: 113440 >>>>> >>>>>>>> [ 0.000000] Kernel command line: >>>>> >>>>>>>> root=UUID=b7e12806-451d-4eef-b86b-a9b65d6c0a3e ro quiet splash >>>>> >>>>>>>> [ 0.000000] Enabling fast FPU save and restore... done. >>>>> >>>>>>>> [ 0.000000] Enabling unmasked SIMD FPU exception support... >>>>> >>>>>>>> done. >>>>> >>>>>>>> [ 0.000000] Initializing CPU#0 >>>>> >>>>>>>> [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 >>>>> >>>>>>>> bytes) >>>>> >>>>>>>> [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. >>>>> >>>>>>>> [ 0.000000] TSC: using PIT calibration value >>>>> >>>>>>>> [ 0.000000] Detected 2658.126 MHz processor. >>>>> >>>>>>>> [ 0.004000] Console: colour VGA+ 80x25 >>>>> >>>>>>>> [ 0.004000] console [tty0] enabled >>>>> >>>>>>>> [ 0.004000] Dentry cache hash table entries: 65536 (order: >>>>> >>>>>>>> 6, 262144 >>>>> >>>>>>>> bytes) >>>>> >>>>>>>> [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, >>>>> >>>>>>>> 131072 >>>>> >>>>>>>> bytes) >>>>> >>>>>>>> [ 0.004000] Memory: 440132k/458176k available (2572k kernel >>>>> >>>>>>>> code, >>>>> >>>>>>>> 17396k reserved, 1160k data, 424k init, 0k highmem) >>>>> >>>>>>>> [ 0.004000] virtual kernel memory layout: >>>>> >>>>>>>> [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 >>>>> >>>>>>>> kB) >>>>> >>>>>>>> [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 >>>>> >>>>>>>> kB) >>>>> >>>>>>>> [ 0.004000] vmalloc : 0xdc800000 - 0xff3fe000 ( 555 >>>>> >>>>>>>> MB) >>>>> >>>>>>>> [ 0.004000] lowmem : 0xc0000000 - 0xdbf70000 ( 447 >>>>> >>>>>>>> MB) >>>>> >>>>>>>> [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 >>>>> >>>>>>>> kB) >>>>> >>>>>>>> [ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 >>>>> >>>>>>>> kB) >>>>> >>>>>>>> [ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 >>>>> >>>>>>>> kB) >>>>> >>>>>>>> [ 0.004000] Checking if this processor honours the WP bit >>>>> >>>>>>>> even in >>>>> >>>>>>>> supervisor mode...Ok. >>>>> >>>>>>>> [ 0.004000] CPA: page pool initialized 1 of 1 pages >>>>> >>>>>>>> preallocated >>>>> >>>>>>>> [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, >>>>> >>>>>>>> MinObjects=0, CPUs=1, Nodes=1 >>>>> >>>>>>>> [ 0.004014] Calibrating delay loop (skipped), value >>>>> >>>>>>>> calculated >>>>> >>>>>>>> using timer frequency.. 5316.25 BogoMIPS (lpj=10632504) >>>>> >>>>>>>> [ 0.004040] Security Framework initialized >>>>> >>>>>>>> [ 0.004051] SELinux: Disabled at boot. >>>>> >>>>>>>> [ 0.004076] AppArmor: AppArmor initialized >>>>> >>>>>>>> [ 0.004091] Mount-cache hash table entries: 512 >>>>> >>>>>>>> [ 0.004326] Initializing cgroup subsys ns >>>>> >>>>>>>> [ 0.004333] Initializing cgroup subsys cpuacct >>>>> >>>>>>>> [ 0.004336] Initializing cgroup subsys memory >>>>> >>>>>>>> [ 0.004359] CPU: Trace cache: 12K uops, L1 D cache: 8K >>>>> >>>>>>>> [ 0.004363] CPU: L2 cache: 512K >>>>> >>>>>>>> [ 0.004367] CPU: Hyper-Threading is disabled >>>>> >>>>>>>> [ 0.004389] Checking 'hlt' instruction... OK. >>>>> >>>>>>>> [ 0.020657] SMP alternatives: switching to UP code >>>>> >>>>>>>> [ 0.028041] Freeing SMP alternatives: 11k freed >>>>> >>>>>>>> [ 0.028049] ACPI: Core revision 20080609 >>>>> >>>>>>>> [ 0.033930] ACPI: Checking initramfs for custom DSDT >>>>> >>>>>>>> [ 0.394845] ACPI: setting ELCR to 0200 (from 0c00) >>>>> >>>>>>>> [ 0.396099] weird, boot CPU (#0) not listedby the BIOS. >>>>> >>>>>>>> [ 0.396102] SMP motherboard not detected. >>>>> >>>>>>>> [ 0.396106] Local APIC not detected. Using dummy APIC >>>>> >>>>>>>> emulation. >>>>> >>>>>>>> [ 0.396109] SMP disabled >>>>> >>>>>>>> [ 0.396203] Brought up 1 CPUs >>>>> >>>>>>>> [ 0.396207] Total of 1 processors activated (5316.25 >>>>> >>>>>>>> BogoMIPS). >>>>> >>>>>>>> [ 0.396224] CPU0 attaching sched-domain: >>>>> >>>>>>>> [ 0.396229] domain 0: span 0 level CPU >>>>> >>>>>>>> [ 0.396232] groups: 0 >>>>> >>>>>>>> [ 0.396602] net_namespace: 840 bytes >>>>> >>>>>>>> [ 0.396616] Booting paravirtualized kernel on bare hardware >>>>> >>>>>>>> [ 0.396887] Time: 3:36:10 Date: 12/04/08 >>>>> >>>>>>>> [ 0.396941] NET: Registered protocol family 16 >>>>> >>>>>>>> [ 0.397443] EISA bus registered >>>>> >>>>>>>> [ 0.397481] ACPI: bus type pci registered >>>>> >>>>>>>> [ 0.397753] PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, >>>>> >>>>>>>> last bus=1 >>>>> >>>>>>>> [ 0.397757] PCI: Using configuration type 1 for base access >>>>> >>>>>>>> [ 0.401665] ACPI: EC: Look up EC in DSDT >>>>> >>>>>>>> [ 0.405888] ACPI: Interpreter enabled >>>>> >>>>>>>> [ 0.405894] ACPI: (supports S0 S3 S4 S5) >>>>> >>>>>>>> [ 0.405916] ACPI: Using PIC for interrupt routing >>>>> >>>>>>>> [ 0.420826] ACPI: EC: GPE = 0x18, I/O: command/status = >>>>> >>>>>>>> 0x66, data = >>>>> >>>>>>>> 0x62 >>>>> >>>>>>>> [ 0.420831] ACPI: EC: driver started in poll mode >>>>> >>>>>>>> [ 0.420924] ACPI: PCI Root Bridge [PCI0] (0000:00) >>>>> >>>>>>>> [ 0.421036] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000, >>>>> >>>>>>>> efffffff] >>>>> >>>>>>>> [ 0.421042] PCI: 0000:00:00.0 reg 14 32bit mmio: [e0800000, >>>>> >>>>>>>> e0800fff] >>>>> >>>>>>>> [ 0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000, >>>>> >>>>>>>> e0400fff] >>>>> >>>>>>>> [ 0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff] >>>>> >>>>>>>> [ 0.421142] pci 0000:00:03.0: PME# supported from D3hot >>>>> >>>>>>>> D3cold >>>>> >>>>>>>> [ 0.421147] pci 0000:00:03.0: PME# disabled >>>>> >>>>>>>> [ 0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff] >>>>> >>>>>>>> [ 0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000, >>>>> >>>>>>>> e0401fff] >>>>> >>>>>>>> [ 0.421204] pci 0000:00:04.0: supports D1 >>>>> >>>>>>>> [ 0.421206] pci 0000:00:04.0: supports D2 >>>>> >>>>>>>> [ 0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot >>>>> >>>>>>>> D3cold >>>>> >>>>>>>> [ 0.421212] pci 0000:00:04.0: PME# disabled >>>>> >>>>>>>> [ 0.421257] pci 0000:00:06.0: quirk: region 8000-803f >>>>> >>>>>>>> claimed by >>>>> >>>>>>>> ali7101 ACPI >>>>> >>>>>>>> [ 0.421261] pci 0000:00:06.0: quirk: region 8040-805f >>>>> >>>>>>>> claimed by >>>>> >>>>>>>> ali7101 SMB >>>>> >>>>>>>> [ 0.421340] PCI: 0000:00:0a.0 reg 10 32bit mmio: [e0402000, >>>>> >>>>>>>> e0402fff] >>>>> >>>>>>>> [ 0.421352] pci 0000:00:0a.0: supports D1 >>>>> >>>>>>>> [ 0.421354] pci 0000:00:0a.0: supports D2 >>>>> >>>>>>>> [ 0.421356] pci 0000:00:0a.0: PME# supported from D0 D1 D2 >>>>> >>>>>>>> D3hot D3cold >>>>> >>>>>>>> [ 0.421360] pci 0000:00:0a.0: PME# disabled >>>>> >>>>>>>> [ 0.421385] PCI: 0000:00:0a.1 reg 10 32bit mmio: [e0403000, >>>>> >>>>>>>> e0403fff] >>>>> >>>>>>>> [ 0.421397] pci 0000:00:0a.1: supports D1 >>>>> >>>>>>>> [ 0.421399] pci 0000:00:0a.1: supports D2 >>>>> >>>>>>>> [ 0.421401] pci 0000:00:0a.1: PME# supported from D0 D1 D2 >>>>> >>>>>>>> D3hot D3cold >>>>> >>>>>>>> [ 0.421405] pci 0000:00:0a.1: PME# disabled >>>>> >>>>>>>> [ 0.421427] PCI: 0000:00:0a.2 reg 10 32bit mmio: [e0404000, >>>>> >>>>>>>> e04047ff] >>>>> >>>>>>>> [ 0.421459] pci 0000:00:0a.2: PME# supported from D0 D3hot >>>>> >>>>>>>> D3cold >>>>> >>>>>>>> [ 0.421464] pci 0000:00:0a.2: PME# disabled >>>>> >>>>>>>> [ 0.421505] PCI: 0000:00:0c.0 reg 20 io port: [8080, 809f] >>>>> >>>>>>>> [ 0.421523] pci 0000:00:0c.0: PME# supported from D0 D3hot >>>>> >>>>>>>> D3cold >>>>> >>>>>>>> [ 0.421527] pci 0000:00:0c.0: PME# disabled >>>>> >>>>>>>> [ 0.421561] PCI: 0000:00:0c.1 reg 20 io port: [80a0, 80bf] >>>>> >>>>>>>> [ 0.421581] pci 0000:00:0c.1: PME# supported from D0 D3hot >>>>> >>>>>>>> D3cold >>>>> >>>>>>>> [ 0.421585] pci 0000:00:0c.1: PME# disabled >>>>> >>>>>>>> [ 0.421607] PCI: 0000:00:0c.2 reg 10 32bit mmio: [e0404800, >>>>> >>>>>>>> e04048ff] >>>>> >>>>>>>> [ 0.421639] pci 0000:00:0c.2: PME# supported from D0 D3hot >>>>> >>>>>>>> D3cold >>>>> >>>>>>>> [ 0.421643] pci 0000:00:0c.2: PME# disabled >>>>> >>>>>>>> [ 0.421682] PCI: 0000:00:0f.0 reg 20 io port: [80c0, 80cf] >>>>> >>>>>>>> [ 0.421724] PCI: 0000:00:12.0 reg 10 io port: [9c00, 9cff] >>>>> >>>>>>>> [ 0.421731] PCI: 0000:00:12.0 reg 14 32bit mmio: [e0404c00, >>>>> >>>>>>>> e0404dff] >>>>> >>>>>>>> [ 0.421760] pci 0000:00:12.0: supports D1 >>>>> >>>>>>>> [ 0.421761] pci 0000:00:12.0: supports D2 >>>>> >>>>>>>> [ 0.421764] pci 0000:00:12.0: PME# supported from D1 D2 >>>>> >>>>>>>> D3hot D3cold >>>>> >>>>>>>> [ 0.421768] pci 0000:00:12.0: PME# disabled >>>>> >>>>>>>> [ 0.421815] PCI: 0000:01:05.0 reg 10 32bit mmio: [f0000000, >>>>> >>>>>>>> f7ffffff] >>>>> >>>>>>>> [ 0.421821] PCI: 0000:01:05.0 reg 14 io port: [a000, a0ff] >>>>> >>>>>>>> [ 0.421827] PCI: 0000:01:05.0 reg 18 32bit mmio: [e0500000, >>>>> >>>>>>>> e050ffff] >>>>> >>>>>>>> [ 0.421843] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff] >>>>> >>>>>>>> [ 0.421857] pci 0000:01:05.0: supports D1 >>>>> >>>>>>>> [ 0.421858] pci 0000:01:05.0: supports D2 >>>>> >>>>>>>> [ 0.421885] PCI: bridge 0000:00:01.0 io port: [a000, afff] >>>>> >>>>>>>> [ 0.421889] PCI: bridge 0000:00:01.0 32bit mmio: [e0500000, >>>>> >>>>>>>> e05fffff] >>>>> >>>>>>>> [ 0.421894] PCI: bridge 0000:00:01.0 32bit mmio pref: >>>>> >>>>>>>> [f0000000, >>>>> >>>>>>>> f7ffffff] >>>>> >>>>>>>> [ 0.421923] bus 00 -> node 0 >>>>> >>>>>>>> [ 0.421933] ACPI: PCI Interrupt Routing Table >>>>> >>>>>>>> [\_SB_.PCI0._PRT] >>>>> >>>>>>>> [ 0.422053] ACPI: PCI Interrupt Routing Table >>>>> >>>>>>>> [\_SB_.PCI0.PPB_._PRT] >>>>> >>>>>>>> [ 0.425764] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 >>>>> >>>>>>>> 11) >>>>> >>>>>>>> *0, disabled. >>>>> >>>>>>>> [ 0.425986] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 >>>>> >>>>>>>> *11) >>>>> >>>>>>>> [ 0.426202] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 >>>>> >>>>>>>> *11) >>>>> >>>>>>>> [ 0.426422] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 >>>>> >>>>>>>> 11) >>>>> >>>>>>>> *0, disabled. >>>>> >>>>>>>> [ 0.426639] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 >>>>> >>>>>>>> *10 11) >>>>> >>>>>>>> [ 0.426858] ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11 >>>>> >>>>>>>> [ 0.427073] ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 >>>>> >>>>>>>> *11) >>>>> >>>>>>>> [ 0.427291] ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 >>>>> >>>>>>>> *11) >>>>> >>>>>>>> [ 0.427508] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 >>>>> >>>>>>>> 11) >>>>> >>>>>>>> *0, disabled. >>>>> >>>>>>>> [ 0.427785] Linux Plug and Play Support v0.97 (c) Adam Belay >>>>> >>>>>>>> [ 0.427844] pnp: PnP ACPI init >>>>> >>>>>>>> [ 0.427859] ACPI: bus type pnp registered >>>>> >>>>>>>> [ 0.436388] pnp: PnP ACPI: found 12 devices >>>>> >>>>>>>> [ 0.436392] ACPI: ACPI bus type pnp unregistered >>>>> >>>>>>>> [ 0.436399] PnPBIOS: Disabled by ACPI PNP >>>>> >>>>>>>> [ 0.440333] PCI: Using ACPI for IRQ routing >>>>> >>>>>>>> [ 0.440499] NET: Registered protocol family 8 >>>>> >>>>>>>> [ 0.440499] NET: Registered protocol family 20 >>>>> >>>>>>>> [ 0.440499] NetLabel: Initializing >>>>> >>>>>>>> [ 0.440499] NetLabel: domain hash size = 128 >>>>> >>>>>>>> [ 0.440499] NetLabel: protocols = UNLABELED CIPSOv4 >>>>> >>>>>>>> [ 0.440499] NetLabel: unlabeled traffic allowed by default >>>>> >>>>>>>> [ 0.440499] tracer: 772 pages allocated for 65536 entries of >>>>> >>>>>>>> 48 bytes >>>>> >>>>>>>> [ 0.440499] actual entries 65620 >>>>> >>>>>>>> [ 0.440770] AppArmor: AppArmor Filesystem Enabled >>>>> >>>>>>>> [ 0.440791] ACPI: RTC can wake from S4 >>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x40b-0x40b has been >>>>> >>>>>>>> reserved >>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x480-0x48f has been >>>>> >>>>>>>> reserved >>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x4d0-0x4d1 has been >>>>> >>>>>>>> reserved >>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x4d6-0x4d6 has been >>>>> >>>>>>>> reserved >>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x8000-0x807f could >>>>> >>>>>>>> not be >>>>> >>>>>>>> reserved >>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0xfe00-0xfe01 has >>>>> >>>>>>>> been reserved >>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0xfe10-0xfe11 has >>>>> >>>>>>>> been reserved >>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0x0-0x9ffff could not >>>>> >>>>>>>> be reserved >>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0xdc000-0xdffff could >>>>> >>>>>>>> not be >>>>> >>>>>>>> reserved >>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0xe0000-0xfffff could >>>>> >>>>>>>> not be >>>>> >>>>>>>> reserved >>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0x100000-0x1bffffff >>>>> >>>>>>>> could not >>>>> >>>>>>>> be reserved >>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0xfff80000-0xffffffff >>>>> >>>>>>>> could >>>>> >>>>>>>> not be reserved >>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0xe0800000-0xe0800fff >>>>> >>>>>>>> has been >>>>> >>>>>>>> reserved >>>>> >>>>>>>> [ 0.476831] pci 0000:00:01.0: PCI bridge, secondary bus >>>>> >>>>>>>> 0000:01 >>>>> >>>>>>>> [ 0.476836] pci 0000:00:01.0: IO window: 0xa000-0xafff >>>>> >>>>>>>> [ 0.476841] pci 0000:00:01.0: MEM window: >>>>> >>>>>>>> 0xe0500000-0xe05fffff >>>>> >>>>>>>> [ 0.476845] pci 0000:00:01.0: PREFETCH window: >>>>> >>>>>>>> 0x000000f0000000-0x000000f7ffffff >>>>> >>>>>>>> [ 0.476852] pci 0000:00:0a.0: CardBus bridge, secondary bus >>>>> >>>>>>>> 0000:02 >>>>> >>>>>>>> [ 0.476854] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff >>>>> >>>>>>>> [ 0.476858] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff >>>>> >>>>>>>> [ 0.476863] pci 0000:00:0a.0: PREFETCH window: >>>>> >>>>>>>> 0x30000000-0x33ffffff >>>>> >>>>>>>> [ 0.476867] pci 0000:00:0a.0: MEM window: >>>>> >>>>>>>> 0x34000000-0x37ffffff >>>>> >>>>>>>> [ 0.476871] pci 0000:00:0a.1: CardBus bridge, secondary bus >>>>> >>>>>>>> 0000:06 >>>>> >>>>>>>> [ 0.476874] pci 0000:00:0a.1: IO window: 0x001800-0x0018ff >>>>> >>>>>>>> [ 0.476878] pci 0000:00:0a.1: IO window: 0x001c00-0x001cff >>>>> >>>>>>>> [ 0.476882] pci 0000:00:0a.1: PREFETCH window: >>>>> >>>>>>>> 0x38000000-0x3bffffff >>>>> >>>>>>>> [ 0.476887] pci 0000:00:0a.1: MEM window: >>>>> >>>>>>>> 0x3c000000-0x3fffffff >>>>> >>>>>>>> [ 0.477258] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ >>>>> >>>>>>>> 11 >>>>> >>>>>>>> [ 0.477263] PCI: setting IRQ 11 as level-triggered >>>>> >>>>>>>> [ 0.477268] pci 0000:00:0a.0: PCI INT A -> Link[LNK2] -> GSI >>>>> >>>>>>>> 11 >>>>> >>>>>>>> (level, low) -> IRQ 11 >>>>> >>>>>>>> [ 0.477540] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ >>>>> >>>>>>>> 10 >>>>> >>>>>>>> [ 0.477543] PCI: setting IRQ 10 as level-triggered >>>>> >>>>>>>> [ 0.477548] pci 0000:00:0a.1: PCI INT B -> Link[LNK4] -> GSI >>>>> >>>>>>>> 10 >>>>> >>>>>>>> (level, low) -> IRQ 10 >>>>> >>>>>>>> [ 0.477554] bus: 00 index 0 io port: [0, ffff] >>>>> >>>>>>>> [ 0.477556] bus: 00 index 1 mmio: [0, ffffffff] >>>>> >>>>>>>> [ 0.477559] bus: 01 index 0 io port: [a000, afff] >>>>> >>>>>>>> [ 0.477562] bus: 01 index 1 mmio: [e0500000, e05fffff] >>>>> >>>>>>>> [ 0.477564] bus: 01 index 2 mmio: [f0000000, f7ffffff] >>>>> >>>>>>>> [ 0.477567] bus: 01 index 3 mmio: [0, 0] >>>>> >>>>>>>> [ 0.477569] bus: 02 index 0 io port: [1000, 10ff] >>>>> >>>>>>>> [ 0.477572] bus: 02 index 1 io port: [1400, 14ff] >>>>> >>>>>>>> [ 0.477574] bus: 02 index 2 mmio: [30000000, 33ffffff] >>>>> >>>>>>>> [ 0.477577] bus: 02 index 3 mmio: [34000000, 37ffffff] >>>>> >>>>>>>> [ 0.477579] bus: 06 index 0 io port: [1800, 18ff] >>>>> >>>>>>>> [ 0.477582] bus: 06 index 1 io port: [1c00, 1cff] >>>>> >>>>>>>> [ 0.477584] bus: 06 index 2 mmio: [38000000, 3bffffff] >>>>> >>>>>>>> [ 0.477587] bus: 06 index 3 mmio: [3c000000, 3fffffff] >>>>> >>>>>>>> [ 0.477610] NET: Registered protocol family 2 >>>>> >>>>>>>> [ 0.477849] IP route cache hash table entries: 4096 (order: >>>>> >>>>>>>> 2, 16384 >>>>> >>>>>>>> bytes) >>>>> >>>>>>>> [ 0.478188] TCP established hash table entries: 16384 >>>>> >>>>>>>> (order: 5, >>>>> >>>>>>>> 131072 bytes) >>>>> >>>>>>>> [ 0.478315] TCP bind hash table entries: 16384 (order: 5, >>>>> >>>>>>>> 131072 bytes) >>>>> >>>>>>>> [ 0.478430] TCP: Hash tables configured (established 16384 >>>>> >>>>>>>> bind 16384) >>>>> >>>>>>>> [ 0.478434] TCP reno registered >>>>> >>>>>>>> [ 0.478576] NET: Registered protocol family 1 >>>>> >>>>>>>> [ 0.478749] checking if image is initramfs... it is >>>>> >>>>>>>> [ 0.980128] Switched to high resolution mode on CPU 0 >>>>> >>>>>>>> [ 1.236336] Freeing initrd memory: 7988k freed >>>>> >>>>>>>> [ 1.236740] Simple Boot Flag at 0x35 set to 0x1 >>>>> >>>>>>>> [ 1.237409] audit: initializing netlink socket (disabled) >>>>> >>>>>>>> [ 1.237447] type=2000 audit(1228361770.236:1): initialized >>>>> >>>>>>>> [ 1.242678] HugeTLB registered 4 MB page size, pre-allocated >>>>> >>>>>>>> 0 pages >>>>> >>>>>>>> [ 1.245896] VFS: Disk quotas dquot_6.5.1 >>>>> >>>>>>>> [ 1.246053] Dquot-cache hash table entries: 1024 (order 0, >>>>> >>>>>>>> 4096 bytes) >>>>> >>>>>>>> [ 1.246214] msgmni has been set to 875 >>>>> >>>>>>>> [ 1.246406] io scheduler noop registered >>>>> >>>>>>>> [ 1.246410] io scheduler anticipatory registered >>>>> >>>>>>>> [ 1.246413] io scheduler deadline registered >>>>> >>>>>>>> [ 1.246435] io scheduler cfq registered (default) >>>>> >>>>>>>> [ 1.246492] pci 0000:00:07.0: Activating ISA DMA hang >>>>> >>>>>>>> workarounds >>>>> >>>>>>>> [ 1.246559] pci 0000:01:05.0: Boot video device >>>>> >>>>>>>> [ 1.247102] isapnp: Scanning for PnP cards... >>>>> >>>>>>>> [ 1.601376] isapnp: No Plug & Play device found >>>>> >>>>>>>> [ 1.670035] Serial: 8250/16550 driver4 ports, IRQ sharing >>>>> >>>>>>>> enabled >>>>> >>>>>>>> [ 1.670179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a >>>>> >>>>>>>> 16550 >>>>> >>>>>>>> [ 1.671493] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ >>>>> >>>>>>>> 11 >>>>> >>>>>>>> [ 1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> >>>>> >>>>>>>> GSI 11 >>>>> >>>>>>>> (level, low) -> IRQ 11 >>>>> >>>>>>>> [ 1.671508] serial 0000:00:03.0: PCI INT A disabled >>>>> >>>>>>>> [ 1.674033] brd: module loaded >>>>> >>>>>>>> [ 1.674149] input: Macintosh mouse button emulation as >>>>> >>>>>>>> /devices/virtual/input/input0 >>>>> >>>>>>>> [ 1.674355] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] >>>>> >>>>>>>> at >>>>> >>>>>>>> 0x60,0x64 irq 1,12 >>>>> >>>>>>>> [ 1.678060] serio: i8042 KBD port at 0x60,0x64 irq 1 >>>>> >>>>>>>> [ 1.678070] serio: i8042 AUX port at 0x60,0x64 irq 12 >>>>> >>>>>>>> [ 1.678734] mice: PS/2 mouse device common for all mice >>>>> >>>>>>>> [ 1.678989] rtc_cmos 00:02: rtc core: registered rtc_cmos as >>>>> >>>>>>>> rtc0 >>>>> >>>>>>>> [ 1.679020] rtc0: alarms up to one month, y3k >>>>> >>>>>>>> [ 1.679231] EISA: Probing bus 0 at eisa.0 >>>>> >>>>>>>> [ 1.679243] Cannot allocate resource for EISA slot 1 >>>>> >>>>>>>> [ 1.679271] Cannot allocate resource for EISA slot 8 >>>>> >>>>>>>> [ 1.679274] EISA: Detected 0 cards. >>>>> >>>>>>>> [ 1.679279] cpuidle: using governor ladder >>>>> >>>>>>>> [ 1.679282] cpuidle: using governor menu >>>>> >>>>>>>> [ 1.679972] TCP cubic registered >>>>> >>>>>>>> [ 1.680063] Using IPI No-Shortcut mode >>>>> >>>>>>>> [ 1.680487] registered taskstats version 1 >>>>> >>>>>>>> [ 1.680625] Magic number: 4:233:613 >>>>> >>>>>>>> [ 1.680643] isa: hash matches >>>>> >>>>>>>> [ 1.680721] tty ptye3: hash matches >>>>> >>>>>>>> [ 1.680820] pci 0000:00:0a.0: hash matches >>>>> >>>>>>>> [ 1.680896] rtc_cmos 00:02: setting system clock to >>>>> >>>>>>>> 2008-12-04 >>>>> >>>>>>>> 03:36:11 UTC (1228361771) >>>>> >>>>>>>> [ 1.680901] BIOS EDD facility v0.16 2004-Jun-25, 0 devices >>>>> >>>>>>>> found >>>>> >>>>>>>> [ 1.680903] EDD information not available. >>>>> >>>>>>>> [ 1.681786] Freeing unused kernel memory: 424k freed >>>>> >>>>>>>> [ 1.681848] Write protecting the kernel text: 2576k >>>>> >>>>>>>> [ 1.681884] Write protecting the kernel read-only data: 936k >>>>> >>>>>>>> [ 1.712227] input: AT Translated Set 2 keyboard as >>>>> >>>>>>>> /devices/platform/i8042/serio0/input/input1 >>>>> >>>>>>>> [ 1.916830] fuse init (API version 7.9) >>>>> >>>>>>>> [ 2.153320] ACPI: CPU0 (power states: C1[C1] C2[C2]) >>>>> >>>>>>>> [ 2.158379] processor ACPI0007:00: registered as >>>>> >>>>>>>> cooling_device0 >>>>> >>>>>>>> [ 2.158385] ACPI: Processor [CPU0] (supports 8 throttling >>>>> >>>>>>>> states) >>>>> >>>>>>>> [ 2.186683] thermal LNXTHERM:01: registered as thermal_zone0 >>>>> >>>>>>>> [ 2.195703] ACPI: Thermal Zone [TZ01] (39 C) >>>>> >>>>>>>> [ 3.435666] usbcore: registered new interface driver usbfs >>>>> >>>>>>>> [ 3.435708] usbcore: registered new interface driver hub >>>>> >>>>>>>> [ 3.449846] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ >>>>> >>>>>>>> 10 >>>>> >>>>>>>> [ 3.449854] ohci1394 0000:00:0a.2: PCI INT C -> Link[LNK5] >>>>> >>>>>>>> -> GSI >>>>> >>>>>>>> 10 (level, low) -> IRQ 10 >>>>> >>>>>>>> [ 3.502708] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): >>>>> >>>>>>>> IRQ=[10] >>>>> >>>>>>>> MMIO=[e0404000-e04047ff] Max Packet=[2048] IR/IT >>>>> >>>>>>>> contexts=[4/4] >>>>> >>>>>>>> [ 3.522828] usbcore: registered new device driver usb >>>>> >>>>>>>> [ 3.529450] No dock devices found. >>>>> >>>>>>>> [ 3.558303] SCSI subsystem initialized >>>>> >>>>>>>> [ 3.573485] USB Universal Host Controller Interface driver >>>>> >>>>>>>> v3.0 >>>>> >>>>>>>> [ 3.577306] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, >>>>> >>>>>>>> 2004) >>>>> >>>>>>>> [ 3.641823] libata version 3.00 loaded. >>>>> >>>>>>>> [ 3.685077] uhci_hcd 0000:00:0c.0: PCI INT A -> Link[LNK2] >>>>> >>>>>>>> -> GSI >>>>> >>>>>>>> 11 (level, low) -> IRQ 11 >>>>> >>>>>>>> [ 3.685094] uhci_hcd 0000:00:0c.0: UHCI Host Controller >>>>> >>>>>>>> [ 3.685194] uhci_hcd 0000:00:0c.0: new USB bus registered, >>>>> >>>>>>>> assigned >>>>> >>>>>>>> bus number 1 >>>>> >>>>>>>> [ 3.685226] uhci_hcd 0000:00:0c.0: irq 11, io base >>>>> >>>>>>>> 0x00008080 >>>>> >>>>>>>> [ 3.685520] usb usb1: configuration #1 chosen from 1 choice >>>>> >>>>>>>> [ 3.685559] hub 1-0:1.0: USB hub found >>>>> >>>>>>>> [ 3.685577] hub 1-0:1.0: 2 ports detected >>>>> >>>>>>>> [ 3.892711] uhci_hcd 0000:00:0c.1: PCI INT B -> Link[LNK4] >>>>> >>>>>>>> -> GSI >>>>> >>>>>>>> 10 (level, low) -> IRQ 10 >>>>> >>>>>>>> [ 3.892729] uhci_hcd 0000:00:0c.1: UHCI Host Controller >>>>> >>>>>>>> [ 3.892769] uhci_hcd 0000:00:0c.1: new USB bus registered, >>>>> >>>>>>>> assigned >>>>> >>>>>>>> bus number 2 >>>>> >>>>>>>> [ 3.892800] uhci_hcd 0000:00:0c.1: irq 10, io base >>>>> >>>>>>>> 0x000080a0 >>>>> >>>>>>>> [ 3.892977] usb usb2: configuration #1 chosen from 1 choice >>>>> >>>>>>>> [ 3.893015] hub 2-0:1.0: USB hub found >>>>> >>>>>>>> [ 3.893030] hub 2-0:1.0: 2 ports detected >>>>> >>>>>>>> [ 4.100720] ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNK5] >>>>> >>>>>>>> -> GSI >>>>> >>>>>>>> 10 (level, low) -> IRQ 10 >>>>> >>>>>>>> [ 4.100748] ehci_hcd 0000:00:0c.2: EHCI Host Controller >>>>> >>>>>>>> [ 4.100790] ehci_hcd 0000:00:0c.2: new USB bus registered, >>>>> >>>>>>>> assigned >>>>> >>>>>>>> bus number 3 >>>>> >>>>>>>> [ 4.100848] ehci_hcd 0000:00:0c.2: irq 10, io mem 0xe0404800 >>>>> >>>>>>>> [ 4.112096] ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI >>>>> >>>>>>>> 0.95, >>>>> >>>>>>>> driver 10 Dec 2004 >>>>> >>>>>>>> [ 4.112430] usb usb3: configuration #1 chosen from 1 choice >>>>> >>>>>>>> [ 4.112470] hub 3-0:1.0: USB hub found >>>>> >>>>>>>> [ 4.112485] hub 3-0:1.0: 4 ports detected >>>>> >>>>>>>> [ 4.321310] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10) >>>>> >>>>>>>> is not >>>>> >>>>>>>> an 8139C+ compatible chip >>>>> >>>>>>>> [ 4.321317] 8139cp 0000:00:12.0: Try the "8139too" driver >>>>> >>>>>>>> instead. >>>>> >>>>>>>> [ 4.327282] 8139too Fast Ethernet driver 0.9.28 >>>>> >>>>>>>> [ 4.327690] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ >>>>> >>>>>>>> 11 >>>>> >>>>>>>> [ 4.327696] 8139too 0000:00:12.0: PCI INT A -> Link[LNK1] -> >>>>> >>>>>>>> GSI 11 >>>>> >>>>>>>> (level, low) -> IRQ 11 >>>>> >>>>>>>> [ 4.328388] eth0: RealTek RTL8139 at 0x9c00, >>>>> >>>>>>>> 08:00:46:c1:2f:38, IRQ 11 >>>>> >>>>>>>> [ 4.328391] eth0: Identified 8139 chip type >>>>> >>>>>>>> 'RTL-8100B/8139D' >>>>> >>>>>>>> [ 4.333699] pata_ali 0000:00:0f.0: can't derive routing for >>>>> >>>>>>>> PCI INT A >>>>> >>>>>>>> [ 4.334315] scsi0 : pata_ali >>>>> >>>>>>>> [ 4.334514] scsi1 : pata_ali >>>>> >>>>>>>> [ 4.335705] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 >>>>> >>>>>>>> bmdma 0x80c0 >>>>> >>>>>>>> irq 14 >>>>> >>>>>>>> [ 4.335709] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 >>>>> >>>>>>>> bmdma 0x80c8 >>>>> >>>>>>>> irq 15 >>>>> >>>>>>>> [ 4.436137] usb 3-3: new high speed USB device using >>>>> >>>>>>>> ehci_hcd and >>>>> >>>>>>>> address 2 >>>>> >>>>>>>> [ 4.496480] ata1.00: ATA-5: HITACHI_DK23FA-60, 00M4A0A1, max >>>>> >>>>>>>> UDMA/100 >>>>> >>>>>>>> [ 4.496486] ata1.00: 117210240 sectors, multi 16: LBA >>>>> >>>>>>>> [ 4.504392] ata1.00: configured for UDMA/100 >>>>> >>>>>>>> [ 4.570936] usb 3-3: configuration #1 chosen from 1 choice >>>>> >>>>>>>> [ 4.668513] ata2.00: ATAPI: SONY DVD RW DW-U50A, 1.5d, >>>>> >>>>>>>> max UDMA/33 >>>>> >>>>>>>> [ 4.668530] ata2.00: WARNING: ATAPI DMA disabled for >>>>> >>>>>>>> reliablity >>>>> >>>>>>>> issues. It can be enabled >>>>> >>>>>>>> [ 4.668534] ata2.00: WARNING: via pata_ali.atapi_dma >>>>> >>>>>>>> modparam or >>>>> >>>>>>>> corresponding sysfs node. >>>>> >>>>>>>> [ 4.684549] ata2.00: configured for UDMA/33 >>>>> >>>>>>>> [ 4.684800] scsi 0:0:0:0: Direct-Access ATA >>>>> >>>>>>>> HITACHI_DK23FA-6 00M4 PQ: 0 ANSI: 5 >>>>> >>>>>>>> [ 4.689907] scsi 1:0:0:0: CD-ROM SONY DVD RW >>>>> >>>>>>>> DW-U50A >>>>> >>>>>>>> 1.5d PQ: 0 ANSI: 5 >>>>> >>>>>>>> [ 4.875853] scsi 0:0:0:0: Attached scsi generic sg0 type 0 >>>>> >>>>>>>> [ 4.875909] scsi 1:0:0:0: Attached scsi generic sg1 type 5 >>>>> >>>>>>>> [ 4.905017] usbcore: registered new interface driver >>>>> >>>>>>>> libusual >>>>> >>>>>>>> [ 4.915604] Initializing USB Mass Storage driver... >>>>> >>>>>>>> [ 4.926183] scsi2 : SCSI emulation for USB Mass Storage >>>>> >>>>>>>> devices >>>>> >>>>>>>> [ 4.930846] Driver 'sd' needs updating - please use bus_type >>>>> >>>>>>>> methods >>>>> >>>>>>>> [ 4.931041] sd 0:0:0:0: [sda] 117210240 512-byte hardware >>>>> >>>>>>>> sectors >>>>> >>>>>>>> (60012 MB) >>>>> >>>>>>>> [ 4.931071] sd 0:0:0:0: [sda] Write Protect is off >>>>> >>>>>>>> [ 4.931074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>> >>>>>>>> [ 4.931121] sd 0:0:0:0: [sda] Write cache: enabled, read >>>>> >>>>>>>> cache: >>>>> >>>>>>>> enabled, doesn't support DPO or FUA >>>>> >>>>>>>> [ 4.931230] sd 0:0:0:0: [sda] 117210240 512-byte hardware >>>>> >>>>>>>> sectors >>>>> >>>>>>>> (60012 MB) >>>>> >>>>>>>> [ 4.931256] sd 0:0:0:0: [sda] Write Protect is off >>>>> >>>>>>>> [ 4.931260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>> >>>>>>>> [ 4.931305] sd 0:0:0:0: [sda] Write cache: enabled, read >>>>> >>>>>>>> cache: >>>>> >>>>>>>> enabled, doesn't support DPO or FUA >>>>> >>>>>>>> [ 4.931312] sda:<6>usbcore: registered new interface driver >>>>> >>>>>>>> usb-storage >>>>> >>>>>>>> [ 4.933380] USB Mass Storage support registered. >>>>> >>>>>>>> [ 4.933587] usb-storage: device found at 2 >>>>> >>>>>>>> [ 4.933590] usb-storage: waiting for device to settle before >>>>> >>>>>>>> scanning >>>>> >>>>>>>> [ 4.954192] Driver 'sr' needs updating - please use bus_type >>>>> >>>>>>>> methods >>>>> >>>>>>>> [ 4.956254] ieee1394: Host added: ID:BUS[0-00:1023] >>>>> >>>>>>>> GUID[080046030188cd58] >>>>> >>>>>>>> [ 4.976443] Marking TSC unstable due to TSC halts in idle >>>>> >>>>>>>> [ 4.981461] sda1 sda2 < sda5 sda6 sda7 sda8 > >>>>> >>>>>>>> [ 5.060309] sd 0:0:0:0: [sda] Attached SCSI disk >>>>> >>>>>>>> [ 5.078879] sr0: scsi3-mmc drive: 24x/24x writer cd/rw >>>>> >>>>>>>> xa/form2 cdda >>>>> >>>>>>>> tray >>>>> >>>>>>>> [ 5.078888] Uniform CD-ROM driver Revision: 3.20 >>>>> >>>>>>>> [ 5.079060] sr 1:0:0:0: Attached scsi CD-ROM sr0 >>>>> >>>>>>>> [ 5.525816] PM: Starting manual resume from disk >>>>> >>>>>>>> [ 5.525824] PM: Resume from partition 8:6 >>>>> >>>>>>>> [ 5.525826] PM: Checking hibernation image. >>>>> >>>>>>>> [ 5.526062] PM: Resume from disk failed. >>>>> >>>>>>>> [ 5.604150] kjournald starting. Commit interval 5 seconds >>>>> >>>>>>>> [ 5.604179] EXT3-fs: mounted filesystem with ordered data >>>>> >>>>>>>> mode. >>>>> >>>>>>>> [ 9.932309] usb-storage: device scan complete >>>>> >>>>>>>> [ 9.933393] scsi 2:0:0:0: Direct-Access USB2.0 Mobile >>>>> >>>>>>>> Disk >>>>> >>>>>>>> 1.00 PQ: 0 ANSI: 2 >>>>> >>>>>>>> [ 9.934990] sd 2:0:0:0: [sdb] 4030463 512-byte hardware >>>>> >>>>>>>> sectors (2064 >>>>> >>>>>>>> MB) >>>>> >>>>>>>> [ 9.935864] sd 2:0:0:0: [sdb] Write Protect is off >>>>> >>>>>>>> [ 9.935867] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 >>>>> >>>>>>>> [ 9.935871] sd 2:0:0:0: [sdb] Assuming drive cache: write >>>>> >>>>>>>> through >>>>> >>>>>>>> [ 9.938722] sd 2:0:0:0: [sdb] 4030463 512-byte hardware >>>>> >>>>>>>> sectors (2064 >>>>> >>>>>>>> MB) >>>>> >>>>>>>> [ 9.939596] sd 2:0:0:0: [sdb] Write Protect is off >>>>> >>>>>>>> [ 9.939599] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 >>>>> >>>>>>>> [ 9.939602] sd 2:0:0:0: [sdb] Assuming drive cache: write >>>>> >>>>>>>> through >>>>> >>>>>>>> [ 9.939609] sdb: sdb1 >>>>> >>>>>>>> [ 10.048277] sd 2:0:0:0: [sdb] Attached SCSI removable disk >>>>> >>>>>>>> [ 10.048598] sd 2:0:0:0: Attached scsi generic sg2 type 0 >>>>> >>>>>>>> [ 13.037997] udevd version 124 started >>>>> >>>>>>>> [ 13.699612] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>>>> >>>>>>>> [ 13.774796] shpchp: Standard Hot Plug PCI Controller Driver >>>>> >>>>>>>> version: >>>>> >>>>>>>> 0.4 >>>>> >>>>>>>> [ 13.843248] Linux agpgart interface v0.103 >>>>> >>>>>>>> [ 13.891353] agpgart-ati 0000:00:00.0: Ati IGP345M chipset >>>>> >>>>>>>> [ 13.961486] agpgart-ati 0000:00:00.0: AGP aperture is 128M @ >>>>> >>>>>>>> 0xe8000000 >>>>> >>>>>>>> [ 14.388428] Yenta: CardBus bridge found at 0000:00:0a.0 >>>>> >>>>>>>> [104d:8158] >>>>> >>>>>>>> [ 14.458941] ACPI: AC Adapter [ACAD] (on-line) >>>>> >>>>>>>> [ 14.516681] Yenta: ISA IRQ mask 0x00a8, PCI irq 11 >>>>> >>>>>>>> [ 14.516687] Socket status: 30000006 >>>>> >>>>>>>> [ 14.517213] input: Power Button (FF) as >>>>> >>>>>>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 >>>>> >>>>>>>> [ 14.528123] ACPI: Power Button (FF) [PWRF] >>>>> >>>>>>>> [ 14.528426] input: Power Button (CM) as >>>>> >>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 >>>>> >>>>>>>> [ 14.544105] ACPI: Power Button (CM) [PBTN] >>>>> >>>>>>>> [ 14.544448] input: Lid Switch as >>>>> >>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 >>>>> >>>>>>>> [ 14.544632] ACPI: Lid Switch [LID] >>>>> >>>>>>>> [ 14.563247] Yenta: CardBus bridge found at 0000:00:0a.1 >>>>> >>>>>>>> [104d:8158] >>>>> >>>>>>>> [ 14.692359] Yenta: ISA IRQ mask 0x00a8, PCI irq 10 >>>>> >>>>>>>> [ 14.692364] Socket status: 30000006 >>>>> >>>>>>>> [ 14.694501] ACPI: EC: non-query interrupt received, >>>>> >>>>>>>> switching to >>>>> >>>>>>>> interrupt mode >>>>> >>>>>>>> [ 14.698825] ali15x3_smbus 0000:00:06.0: ALI15X3_smb region >>>>> >>>>>>>> uninitialized - upgrade BIOS or use force_addr=0xaddr >>>>> >>>>>>>> [ 14.698834] ali15x3_smbus 0000:00:06.0: ALI15X3 not >>>>> >>>>>>>> detected, >>>>> >>>>>>>> module not inserted. >>>>> >>>>>>>> [ 14.904580] ACPI: Battery Slot [BAT1] (battery present) >>>>> >>>>>>>> [ 15.944450] sony-laptop: Sony Notebook Control Driver v0.6. >>>>> >>>>>>>> [ 15.971330] input: Sony Vaio Keys as >>>>> >>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/SNY5001:00/input/input5 >>>>> >>>>>>>> [ 15.984278] input: Sony Vaio Jogdial as >>>>> >>>>>>>> /devices/virtual/input/input6 >>>>> >>>>>>>> [ 16.158529] input: Video Bus as >>>>> >>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0a/device:0b/input/input7 >>>>> >>>>>>>> [ 16.172136] ACPI: Video Device [VGA] (multi-head: yes rom: >>>>> >>>>>>>> no post: >>>>> >>>>>>>> no) >>>>> >>>>>>>> [ 16.183661] parport_pc 00:0a: reported by Plug and Play ACPI >>>>> >>>>>>>> [ 16.183770] parport0: PC-style at 0x378 (0x778), irq 7, dma >>>>> >>>>>>>> 3 >>>>> >>>>>>>> [PCSPP,TRISTATE,COMPAT,ECP,DMA] >>>>> >>>>>>>> [ 16.216264] ALI 5451 0000:00:04.0: power state changed by >>>>> >>>>>>>> ACPI to D0 >>>>> >>>>>>>> [ 16.216633] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ >>>>> >>>>>>>> 11 >>>>> >>>>>>>> [ 16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] >>>>> >>>>>>>> -> GSI >>>>> >>>>>>>> 11 (level, low) -> IRQ 11 >>>>> >>>>>>>> [ 16.909332] input: PC Speaker as >>>>> >>>>>>>> /devices/platform/pcspkr/input/input8 >>>>> >>>>>>>> [ 17.267206] input: PS/2 Mouse as >>>>> >>>>>>>> /devices/platform/i8042/serio1/input/input9 >>>>> >>>>>>>> [ 17.325731] input: AlpsPS/2 ALPS GlidePoint as >>>>> >>>>>>>> /devices/platform/i8042/serio1/input/input10 >>>>> >>>>>>>> [ 20.223118] cs: IO port probe 0x100-0x3af: excluding >>>>> >>>>>>>> 0x200-0x207 >>>>> >>>>>>>> 0x220-0x22f 0x330-0x337 0x388-0x38f >>>>> >>>>>>>> [ 20.225384] cs: IO port probe 0x3e0-0x4ff: clean. >>>>> >>>>>>>> [ 20.226259] cs: IO port probe 0x820-0x8ff: clean. >>>>> >>>>>>>> [ 20.227243] cs: IO port probe 0x100-0x3af: excluding >>>>> >>>>>>>> 0x200-0x207 >>>>> >>>>>>>> 0x220-0x22f 0x330-0x337 0x388-0x38f >>>>> >>>>>>>> [ 20.229477] cs: IO port probe 0x3e0-0x4ff: clean. >>>>> >>>>>>>> [ 20.230351] cs: IO port probe 0x820-0x8ff: clean. >>>>> >>>>>>>> [ 20.231207] cs: IO port probe 0xc00-0xcf7: clean. >>>>> >>>>>>>> [ 20.232294] cs: IO port probe 0xa00-0xaff: clean. >>>>> >>>>>>>> [ 20.234039] cs: IO port probe 0xc00-0xcf7: clean. >>>>> >>>>>>>> [ 20.235080] cs: IO port probe 0xa00-0xaff: clean. >>>>> >>>>>>>> [ 20.848038] AC'97 1 does not respond - RESET >>>>> >>>>>>>> [ 20.864038] AC'97 1 access is not valid [0xffffffff], >>>>> >>>>>>>> removing mixer. >>>>> >>>>>>>> [ 20.864048] ali mixer 1 creating error. >>>>> >>>>>>>> [ 22.042820] lp0: using parport0 (interrupt-driven). >>>>> >>>>>>>> [ 22.270522] Adding 1253028k swap on /dev/sda6. Priority:-1 >>>>> >>>>>>>> extents:1 across:1253028k >>>>> >>>>>>>> [ 22.848407] EXT3 FS on sda5, internal journal >>>>> >>>>>>>> [ 24.167105] type=1505 audit(1228349194.280:2): >>>>> >>>>>>>> operation="profile_load" >>>>> >>>>>>>> name="/usr/share/gdm/guest-session/Xsession" >>>>> >>>>>>>> name2="default" pid=4076 >>>>> >>>>>>>> [ 24.390331] type=1505 audit(1228349194.504:3): >>>>> >>>>>>>> operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" >>>>> >>>>>>>> name2="default" pid=4081 >>>>> >>>>>>>> [ 24.390845] type=1505 audit(1228349194.504:4): >>>>> >>>>>>>> operation="profile_load" name="/usr/sbin/cupsd" name2="default" >>>>> >>>>>>>> pid=4081 >>>>> >>>>>>>> [ 24.572943] ip_tables: (C) 2000-2006 Netfilter Core Team >>>>> >>>>>>>> [ 25.424608] ACPI: WMI: Mapper loaded >>>>> >>>>>>>> [ 26.678424] warning: `avahi-daemon' uses 32-bit capabilities >>>>> >>>>>>>> (legacy support in use) >>>>> >>>>>>>> [ 26.744141] apm: BIOS version 1.2 Flags 0x03 (Driver version >>>>> >>>>>>>> 1.16ac) >>>>> >>>>>>>> [ 26.744152] apm: overridden by ACPI. >>>>> >>>>>>>> [ 26.974597] ppdev: user-space parallel port driver >>>>> >>>>>>>> [ 27.370850] sonypi: Sony Programmable I/O Controller Driver >>>>> >>>>>>>> v1.26. >>>>> >>>>>>>> [ 27.373115] sonypi: please try the sony-laptop module >>>>> >>>>>>>> instead and >>>>> >>>>>>>> report failures, see also >>>>> >>>>>>>> http://www.linux.it/~malattia/wiki/index.php/Sony_drivers >>>>> >>>>>>>> [ 27.376122] sonypi: detected type2 model, verbose = 0, >>>>> >>>>>>>> fnkeyinit = >>>>> >>>>>>>> off, camera = off, compat = off, mask = 0xffffffff, useinput = >>>>> >>>>>>>> on, >>>>> >>>>>>>> acpi = on >>>>> >>>>>>>> [ 27.376136] sonypi: enabled at irq=11, port1=0x1080, >>>>> >>>>>>>> port2=0x1084 >>>>> >>>>>>>> [ 27.376139] sonypi: device allocated minor is 60 >>>>> >>>>>>>> [ 27.381187] input: Sony Vaio Jogdial as >>>>> >>>>>>>> /devices/platform/sonypi/input/input11 >>>>> >>>>>>>> [ 27.412392] input: Sony Vaio Keys as >>>>> >>>>>>>> /devices/platform/sonypi/input/input12 >>>>> >>>>>>>> [ 27.485856] sonypi command failed at >>>>> >>>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1 >>>>> >>>>>>>> (line >>>>> >>>>>>>> 653) >>>>> >>>>>>>> [ 27.529505] sonypi command failed at >>>>> >>>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2 >>>>> >>>>>>>> (line >>>>> >>>>>>>> 664) >>>>> >>>>>>>> [ 27.573141] sonypi command failed at >>>>> >>>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2 >>>>> >>>>>>>> (line >>>>> >>>>>>>> 666) >>>>> >>>>>>>> [ 27.616781] sonypi command failed at >>>>> >>>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1 >>>>> >>>>>>>> (line >>>>> >>>>>>>> 653) >>>>> >>>>>>>> [ 29.719152] Bluetooth: Core ver 2.13 >>>>> >>>>>>>> [ 29.722230] NET: Registered protocol family 31 >>>>> >>>>>>>> [ 29.722240] Bluetooth: HCI device and connection manager >>>>> >>>>>>>> initialized >>>>> >>>>>>>> [ 29.722246] Bluetooth: HCI socket layer initialized >>>>> >>>>>>>> [ 29.747817] Bluetooth: L2CAP ver 2.11 >>>>> >>>>>>>> [ 29.747828] Bluetooth: L2CAP socket layer initialized >>>>> >>>>>>>> [ 29.775634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >>>>> >>>>>>>> [ 29.775643] Bluetooth: BNEP filters: protocol multicast >>>>> >>>>>>>> [ 29.798271] Bluetooth: RFCOMM socket layer initialized >>>>> >>>>>>>> [ 29.798654] Bluetooth: RFCOMM TTY layer initialized >>>>> >>>>>>>> [ 29.798663] Bluetooth: RFCOMM ver 1.10 >>>>> >>>>>>>> [ 29.829262] Bridge firewalling registered >>>>> >>>>>>>> [ 29.830471] pan0: Dropping NETIF_F_UFO since no >>>>> >>>>>>>> NETIF_F_HW_CSUM >>>>> >>>>>>>> feature. >>>>> >>>>>>>> [ 29.848436] Bluetooth: SCO (Voice Link) ver 0.6 >>>>> >>>>>>>> [ 29.848468] Bluetooth: SCO socket layer initialized >>>>> >>>>>>>> [ 31.798487] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ >>>>> >>>>>>>> 10 >>>>> >>>>>>>> [ 31.798514] pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI >>>>> >>>>>>>> 10 >>>>> >>>>>>>> (level, low) -> IRQ 10 >>>>> >>>>>>>> [ 32.045868] [drm] Initialized drm 1.1.0 20060810 >>>>> >>>>>>>> [ 32.065087] [drm] Initialized radeon 1.29.0 20080528 on >>>>> >>>>>>>> minor 0 >>>>> >>>>>>>> [ 32.408164] agpgart-ati 0000:00:00.0: AGP 2.0 bridge >>>>> >>>>>>>> [ 32.408203] agpgart-ati 0000:00:00.0: putting AGP V2 device >>>>> >>>>>>>> into 4x >>>>> >>>>>>>> mode >>>>> >>>>>>>> [ 32.408255] pci 0000:01:05.0: putting AGP V2 device into 4x >>>>> >>>>>>>> mode >>>>> >>>>>>>> [ 32.559341] [drm] Setting GART location based on new memory >>>>> >>>>>>>> map >>>>> >>>>>>>> [ 32.559362] [drm] Loading R100 Microcode >>>>> >>>>>>>> [ 32.559410] [drm] writeback test succeeded in 1 usecs >>>>> >>>>>>>> [ 33.960725] eth0: link down >>>>> >>>>>>>> [ 133.708158] ppdev0: registered pardevice >>>>> >>>>>>>> [ 133.756068] ppdev0: unregistered pardevice >>>>> >>>>>>>> [ 135.520452] ppdev0: registered pardevice >>>>> >>>>>>>> [ 135.568396] ppdev0: unregistered pardevice >>>>> >>>>>>>> [ 135.796362] type=1503 audit(1228349305.912:5): >>>>> >>>>>>>> operation="inode_permission" requested_mask="r::" >>>>> >>>>>>>> denied_mask="r::" >>>>> >>>>>>>> fsuid=7 name="/proc/5785/net/" pid=5785 >>>>> >>>>>>>> profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.906488] NET: Registered protocol family 10 >>>>> >>>>>>>> [ 135.908629] lo: Disabled Privacy Extensions >>>>> >>>>>>>> [ 135.910608] ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>> >>>>>>>> [ 135.913224] type=1503 audit(1228349306.028:6): >>>>> >>>>>>>> operation="socket_create" family="ax25" sock_type="dgram" >>>>> >>>>>>>> protocol=0 >>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.913252] type=1503 audit(1228349306.028:7): >>>>> >>>>>>>> operation="socket_create" family="netrom" sock_type="seqpacket" >>>>> >>>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.913261] type=1503 audit(1228349306.028:8): >>>>> >>>>>>>> operation="socket_create" family="rose" sock_type="dgram" >>>>> >>>>>>>> protocol=0 >>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.913268] type=1503 audit(1228349306.028:9): >>>>> >>>>>>>> operation="socket_create" family="ipx" sock_type="dgram" >>>>> >>>>>>>> protocol=0 >>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.913275] type=1503 audit(1228349306.028:10): >>>>> >>>>>>>> operation="socket_create" family="appletalk" sock_type="dgram" >>>>> >>>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.913282] type=1503 audit(1228349306.028:11): >>>>> >>>>>>>> operation="socket_create" family="econet" sock_type="dgram" >>>>> >>>>>>>> protocol=0 >>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.913289] type=1503 audit(1228349306.028:12): >>>>> >>>>>>>> operation="socket_create" family="ash" sock_type="dgram" >>>>> >>>>>>>> protocol=0 >>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.913296] type=1503 audit(1228349306.028:13): >>>>> >>>>>>>> operation="socket_create" family="x25" sock_type="seqpacket" >>>>> >>>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.913425] type=1503 audit(1228349306.028:14): >>>>> >>>>>>>> operation="inode_permission" requested_mask="::r" >>>>> >>>>>>>> denied_mask="::r" >>>>> >>>>>>>> fsuid=7 name="/proc/5785/net/dev" pid=5785 >>>>> >>>>>>>> profile="/usr/sbin/cupsd" >>>>> >>>>>>>> [ 135.939426] ppdev0: registered pardevice >>>>> >>>>>>>> [ 135.988553] ppdev0: unregistered pardevice >>>>> >>>>>>>> >>>>> >>>>>>>> Module Size Used by >>>>> >>>>>>>> ipv6 263972 8 >>>>> >>>>>>>> nls_iso8859_1 12032 1 >>>>> >>>>>>>> nls_cp437 13696 1 >>>>> >>>>>>>> vfat 18816 1 >>>>> >>>>>>>> fat 57376 1 vfat >>>>> >>>>>>>> binfmt_misc 16904 1 >>>>> >>>>>>>> radeon 147616 2 >>>>> >>>>>>>> drm 86056 3 radeon >>>>> >>>>>>>> sco 18308 2 >>>>> >>>>>>>> bridge 56980 0 >>>>> >>>>>>>> stp 10628 1 bridge >>>>> >>>>>>>> rfcomm 44432 0 >>>>> >>>>>>>> bnep 20480 2 >>>>> >>>>>>>> l2cap 30464 6 rfcomm,bnep >>>>> >>>>>>>> bluetooth 61924 6 sco,rfcomm,bnep,l2cap >>>>> >>>>>>>> sonypi 26648 0 >>>>> >>>>>>>> ppdev 15620 0 >>>>> >>>>>>>> speedstep_lib 12676 0 >>>>> >>>>>>>> cpufreq_userspace 11396 0 >>>>> >>>>>>>> cpufreq_ondemand 14988 0 >>>>> >>>>>>>> cpufreq_stats 13188 0 >>>>> >>>>>>>> cpufreq_powersave 9856 0 >>>>> >>>>>>>> cpufreq_conservative 14600 0 >>>>> >>>>>>>> freq_table 12672 2 cpufreq_ondemand,cpufreq_stats >>>>> >>>>>>>> wmi 14504 0 >>>>> >>>>>>>> pci_slot 12552 0 >>>>> >>>>>>>> sbs 19464 0 >>>>> >>>>>>>> sbshc 13440 1 sbs >>>>> >>>>>>>> iptable_filter 10752 0 >>>>> >>>>>>>> ip_tables 19600 1 iptable_filter >>>>> >>>>>>>> x_tables 22916 1 ip_tables >>>>> >>>>>>>> sbp2 29324 0 >>>>> >>>>>>>> lp 17156 0 >>>>> >>>>>>>> joydev 18368 0 >>>>> >>>>>>>> pcmcia 43052 0 >>>>> >>>>>>>> evdev 17696 16 >>>>> >>>>>>>> psmouse 45200 0 >>>>> >>>>>>>> serio_raw 13444 0 >>>>> >>>>>>>> pcspkr 10624 0 >>>>> >>>>>>>> snd_ali5451 27532 3 >>>>> >>>>>>>> parport_pc 39204 1 >>>>> >>>>>>>> video 25104 0 >>>>> >>>>>>>> snd_ac97_codec 111652 1 snd_ali5451 >>>>> >>>>>>>> parport 42604 3 ppdev,lp,parport_pc >>>>> >>>>>>>> output 11008 1 video >>>>> >>>>>>>> ac97_bus 9856 1 snd_ac97_codec >>>>> >>>>>>>> snd_pcm_oss 46848 0 >>>>> >>>>>>>> sony_laptop 39004 0 >>>>> >>>>>>>> snd_mixer_oss 22784 1 snd_pcm_oss >>>>> >>>>>>>> snd_pcm 83204 3 >>>>> >>>>>>>> snd_ali5451,snd_ac97_codec,snd_pcm_oss >>>>> >>>>>>>> snd_seq_dummy 10884 0 >>>>> >>>>>>>> container 11520 0 >>>>> >>>>>>>> snd_seq_oss 38528 0 >>>>> >>>>>>>> snd_seq_midi 14336 0 >>>>> >>>>>>>> i2c_ali1535 14340 0 >>>>> >>>>>>>> snd_rawmidi 29824 1 snd_seq_midi >>>>> >>>>>>>> snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi >>>>> >>>>>>>> i2c_ali15x3 14852 0 >>>>> >>>>>>>> battery 18436 0 >>>>> >>>>>>>> snd_seq 57776 6 >>>>> >>>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >>>>> >>>>>>>> button 14224 0 >>>>> >>>>>>>> ac 12292 0 >>>>> >>>>>>>> yenta_socket 31756 2 >>>>> >>>>>>>> snd_timer 29960 2 snd_pcm,snd_seq >>>>> >>>>>>>> snd_seq_device 15116 5 >>>>> >>>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >>>>> >>>>>>>> rsrc_nonstatic 19072 1 yenta_socket >>>>> >>>>>>>> i2c_core 31892 2 i2c_ali1535,i2c_ali15x3 >>>>> >>>>>>>> pcmcia_core 43412 3 >>>>> >>>>>>>> pcmcia,yenta_socket,rsrc_nonstatic >>>>> >>>>>>>> snd 63268 16 >>>>> >>>>>>>> snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>>>> >>>>>>>> soundcore 15328 1 snd >>>>> >>>>>>>> snd_page_alloc 16136 1 snd_pcm >>>>> >>>>>>>> ati_agp 14988 1 >>>>> >>>>>>>> agpgart 42184 2 drm,ati_agp >>>>> >>>>>>>> shpchp 37908 0 >>>>> >>>>>>>> pci_hotplug 35236 1 shpchp >>>>> >>>>>>>> ext3 133256 1 >>>>> >>>>>>>> jbd 55444 1 ext3 >>>>> >>>>>>>> mbcache 16004 1 ext3 >>>>> >>>>>>>> sr_mod 22212 0 >>>>> >>>>>>>> cdrom 43168 1 sr_mod >>>>> >>>>>>>> sd_mod 42264 6 >>>>> >>>>>>>> crc_t10dif 9984 1 sd_mod >>>>> >>>>>>>> usb_storage 81728 1 >>>>> >>>>>>>> libusual 27156 1 usb_storage >>>>> >>>>>>>> sg 39732 0 >>>>> >>>>>>>> pata_acpi 12160 0 >>>>> >>>>>>>> pata_ali 16516 3 >>>>> >>>>>>>> 8139too 31616 0 >>>>> >>>>>>>> ata_generic 12932 0 >>>>> >>>>>>>> libata 177312 3 pata_acpi,pata_ali,ata_generic >>>>> >>>>>>>> 8139cp 27520 0 >>>>> >>>>>>>> uhci_hcd 30736 0 >>>>> >>>>>>>> ehci_hcd 43276 0 >>>>> >>>>>>>> mii 13440 2 8139too,8139cp >>>>> >>>>>>>> scsi_mod 155212 6 >>>>> >>>>>>>> sbp2,sr_mod,sd_mod,usb_storage,sg,libata >>>>> >>>>>>>> dock 16656 1 libata >>>>> >>>>>>>> ohci1394 37936 0 >>>>> >>>>>>>> usbcore 148848 5 >>>>> >>>>>>>> usb_storage,libusual,uhci_hcd,ehci_hcd >>>>> >>>>>>>> ieee1394 96324 2 sbp2,ohci1394 >>>>> >>>>>>>> thermal 23708 0 >>>>> >>>>>>>> processor 42156 2 thermal >>>>> >>>>>>>> fan 12548 0 >>>>> >>>>>>>> fbcon 47648 0 >>>>> >>>>>>>> tileblit 10880 1 fbcon >>>>> >>>>>>>> font 16512 1 fbcon >>>>> >>>>>>>> bitblit 13824 1 fbcon >>>>> >>>>>>>> softcursor 9984 1 bitblit >>>>> >>>>>>>> fuse 60828 5 >>>>> >>>>>>>> >>>>> >>>>>>>> ######################################################### >>>>> >>>>>>>> >>>>> >>>>>>>> I undrestand almost nothing this time! So, please help me. >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> >>>>> >>>>>>>> Thank you. >>>>> >>>>>>>> >>>>> >>>>>>> >>>>> >>>>>> >>>>> >>>>> >>>>> >>>> >>>>> >>> >>>>> >> >>>>> > >>>>> >>>> >>> >> >
