To whom it may concern, I had used scanModem several times on several computers and I have never got such messages like these: ####################Linux Terminal#################### hooman@hooman-laptop:~/Desktop$ sudo ./scanModem [sudo] password for hooman: UPDATE=2008_11_06 There are weekly updates of scanModem. Your copy is more than 4 weeks old!! If decisive guidance is not provided by this scanModem of 2008_11_06, download an update from http://linmodems.technion.ac.il Continuing in 10 seconds. Identifying PCI bus slots with candidate modems. Running PCIbus cases Analysing card in PCI bus 00:03.0, writing to scanout.00:03.0 Please load the candidate driver slamr, with Admin/root command: sudo modprobe slamr Then rerun ./scanModem hooman@hooman-laptop:~/Desktop$ sudo modprobe slamr FATAL: Module slamr not found. ####################ModemDate.txt#################### Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, as HTML can contain viruses. Use as the email Subject Line: YourName, YourCountry kernel 2.6.27-7-generic With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. YourCountry will enable Country specific guidance. Linux experts in YourCountry can be found through: http://www.linux.org/groups/index.html. They will know your Country's modem code, which may be essential for dialup service. Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. So in a day, also check the Archived responses at http://www.linmodems.org -------------------------- System information ---------------------------- CPU=i686, Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 scanModem update of: 2008_11_06 There are no blacklisted modem drivers in /etc/modprobe* files Attached USB devices are: ID 126f:0163 TwinMOS ID 1d6b:0002 Linux Foundation 2.0 root hub ID 1d6b:0001 Linux Foundation 1.1 root hub ID 1d6b:0001 Linux Foundation 1.1 root hub USB modems not recognized For candidate card in slot 00:03.0, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:03.0 10b9:5457 104d:8158 Modem: ALi Corporation M5457 AC'97 Modem Controller Modem interrupt assignment and sharing: 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI 5451, sonypi, eth0 --- Bootup diagnostics for card in PCI slot 00:03.0 ---- [ 0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000, e0400fff] [ 0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff] [ 0.421142] pci 0000:00:03.0: PME# supported from D3hot D3cold [ 0.421147] pci 0000:00:03.0: PME# disabled [ 1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> GSI 11 (level, low) -> IRQ 11 [ 1.671508] serial 0000:00:03.0: PCI INT A disabled The PCI slot 00:03.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. For candidate card in slot 00:04.0, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:04.0 10b9:5451 104d:8158 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device Modem interrupt assignment and sharing: 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI 5451, sonypi, eth0 --- Bootup diagnostics for card in PCI slot 00:04.0 ---- [ 0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff] [ 0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000, e0401fff] [ 0.421204] pci 0000:00:04.0: supports D1 [ 0.421206] pci 0000:00:04.0: supports D2 [ 0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold [ 0.421212] pci 0000:00:04.0: PME# disabled [ 16.216264] ALI 5451 0000:00:04.0: power state changed by ACPI to D0 [ 16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI 11 (level, low) -> IRQ 11 The PCI slot 00:04.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. ####################dmesg.txt#################### CPU0 0: 19627 XT-PIC-XT timer 1: 466 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 3: 2 XT-PIC-XT 5: 2 XT-PIC-XT 7: 3 XT-PIC-XT parport0 8: 2 XT-PIC-XT rtc0 9: 996 XT-PIC-XT acpi 10: 12650 XT-PIC-XT ohci1394, uhci_hcd:usb2, ehci_hcd:usb3, yenta, radeon@pci:0000:01:05.0 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI 5451, sonypi, eth0 12: 5615 XT-PIC-XT i8042 14: 8703 XT-PIC-XT pata_ali 15: 1971 XT-PIC-XT pata_ali NMI: 0 Non-maskable interrupts LOC: 0 Local timer interrupts RES: 0 Rescheduling interrupts CAL: 0 function call interrupts TLB: 0 TLB shootdowns SPU: 0 Spurious interrupts ERR: 0 MIS: 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000 (usable) [ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data) [ 0.000000] BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) [ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x1bf70 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 1bf70000 @ 7000-d000 [ 0.000000] RAMDISK: 1b792000 - 1bf5f052 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F6FD0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 1BF773FE, 002C (r1 SONY K7 6040000 LTP 0) [ 0.000000] ACPI: FACP 1BF7BF64, 0074 (r1 SONY K7 6040000 PTL F4240) [ 0.000000] ACPI: DSDT 1BF7742A, 4B3A (r1 SONY K7 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 1BF7CFC0, 0040 [ 0.000000] ACPI: BOOT 1BF7BFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Sony [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 447MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1bf70000 [ 0.000000] low ram: 00000000 - 1bf70000 [ 0.000000] bootmap 00002000 - 000057f0 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bf70000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [001b792000 - 001bf5f052] RAMDISK ==> [001b792000 - 001bf5f052] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001bf70 [ 0.000000] HighMem 0x0001bf70 -> 0x0001bf70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001bf70 [ 0.000000] On node 0 totalpages: 114447 [ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 109477 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (013f2000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113440 [ 0.000000] Kernel command line: root=UUID=b7e12806-451d-4eef-b86b-a9b65d6c0a3e ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2658.126 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 440132k/458176k available (2572k kernel code, 17396k reserved, 1160k data, 424k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xdc800000 - 0xff3fe000 ( 555 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 5316.25 BogoMIPS (lpj=10632504) [ 0.004040] Security Framework initialized [ 0.004051] SELinux: Disabled at boot. [ 0.004076] AppArmor: AppArmor initialized [ 0.004091] Mount-cache hash table entries: 512 [ 0.004326] Initializing cgroup subsys ns [ 0.004333] Initializing cgroup subsys cpuacct [ 0.004336] Initializing cgroup subsys memory [ 0.004359] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004363] CPU: L2 cache: 512K [ 0.004367] CPU: Hyper-Threading is disabled [ 0.004389] Checking 'hlt' instruction... OK. [ 0.020657] SMP alternatives: switching to UP code [ 0.028041] Freeing SMP alternatives: 11k freed [ 0.028049] ACPI: Core revision 20080609 [ 0.033930] ACPI: Checking initramfs for custom DSDT [ 0.394845] ACPI: setting ELCR to 0200 (from 0c00) [ 0.396099] weird, boot CPU (#0) not listedby the BIOS. [ 0.396102] SMP motherboard not detected. [ 0.396106] Local APIC not detected. Using dummy APIC emulation. [ 0.396109] SMP disabled [ 0.396203] Brought up 1 CPUs [ 0.396207] Total of 1 processors activated (5316.25 BogoMIPS). [ 0.396224] CPU0 attaching sched-domain: [ 0.396229] domain 0: span 0 level CPU [ 0.396232] groups: 0 [ 0.396602] net_namespace: 840 bytes [ 0.396616] Booting paravirtualized kernel on bare hardware [ 0.396887] Time: 3:36:10 Date: 12/04/08 [ 0.396941] NET: Registered protocol family 16 [ 0.397443] EISA bus registered [ 0.397481] ACPI: bus type pci registered [ 0.397753] PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=1 [ 0.397757] PCI: Using configuration type 1 for base access [ 0.401665] ACPI: EC: Look up EC in DSDT [ 0.405888] ACPI: Interpreter enabled [ 0.405894] ACPI: (supports S0 S3 S4 S5) [ 0.405916] ACPI: Using PIC for interrupt routing [ 0.420826] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.420831] ACPI: EC: driver started in poll mode [ 0.420924] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.421036] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000, efffffff] [ 0.421042] PCI: 0000:00:00.0 reg 14 32bit mmio: [e0800000, e0800fff] [ 0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000, e0400fff] [ 0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff] [ 0.421142] pci 0000:00:03.0: PME# supported from D3hot D3cold [ 0.421147] pci 0000:00:03.0: PME# disabled [ 0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff] [ 0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000, e0401fff] [ 0.421204] pci 0000:00:04.0: supports D1 [ 0.421206] pci 0000:00:04.0: supports D2 [ 0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold [ 0.421212] pci 0000:00:04.0: PME# disabled [ 0.421257] pci 0000:00:06.0: quirk: region 8000-803f claimed by ali7101 ACPI [ 0.421261] pci 0000:00:06.0: quirk: region 8040-805f claimed by ali7101 SMB [ 0.421340] PCI: 0000:00:0a.0 reg 10 32bit mmio: [e0402000, e0402fff] [ 0.421352] pci 0000:00:0a.0: supports D1 [ 0.421354] pci 0000:00:0a.0: supports D2 [ 0.421356] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.421360] pci 0000:00:0a.0: PME# disabled [ 0.421385] PCI: 0000:00:0a.1 reg 10 32bit mmio: [e0403000, e0403fff] [ 0.421397] pci 0000:00:0a.1: supports D1 [ 0.421399] pci 0000:00:0a.1: supports D2 [ 0.421401] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.421405] pci 0000:00:0a.1: PME# disabled [ 0.421427] PCI: 0000:00:0a.2 reg 10 32bit mmio: [e0404000, e04047ff] [ 0.421459] pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold [ 0.421464] pci 0000:00:0a.2: PME# disabled [ 0.421505] PCI: 0000:00:0c.0 reg 20 io port: [8080, 809f] [ 0.421523] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold [ 0.421527] pci 0000:00:0c.0: PME# disabled [ 0.421561] PCI: 0000:00:0c.1 reg 20 io port: [80a0, 80bf] [ 0.421581] pci 0000:00:0c.1: PME# supported from D0 D3hot D3cold [ 0.421585] pci 0000:00:0c.1: PME# disabled [ 0.421607] PCI: 0000:00:0c.2 reg 10 32bit mmio: [e0404800, e04048ff] [ 0.421639] pci 0000:00:0c.2: PME# supported from D0 D3hot D3cold [ 0.421643] pci 0000:00:0c.2: PME# disabled [ 0.421682] PCI: 0000:00:0f.0 reg 20 io port: [80c0, 80cf] [ 0.421724] PCI: 0000:00:12.0 reg 10 io port: [9c00, 9cff] [ 0.421731] PCI: 0000:00:12.0 reg 14 32bit mmio: [e0404c00, e0404dff] [ 0.421760] pci 0000:00:12.0: supports D1 [ 0.421761] pci 0000:00:12.0: supports D2 [ 0.421764] pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold [ 0.421768] pci 0000:00:12.0: PME# disabled [ 0.421815] PCI: 0000:01:05.0 reg 10 32bit mmio: [f0000000, f7ffffff] [ 0.421821] PCI: 0000:01:05.0 reg 14 io port: [a000, a0ff] [ 0.421827] PCI: 0000:01:05.0 reg 18 32bit mmio: [e0500000, e050ffff] [ 0.421843] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff] [ 0.421857] pci 0000:01:05.0: supports D1 [ 0.421858] pci 0000:01:05.0: supports D2 [ 0.421885] PCI: bridge 0000:00:01.0 io port: [a000, afff] [ 0.421889] PCI: bridge 0000:00:01.0 32bit mmio: [e0500000, e05fffff] [ 0.421894] PCI: bridge 0000:00:01.0 32bit mmio pref: [f0000000, f7ffffff] [ 0.421923] bus 00 -> node 0 [ 0.421933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.422053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT] [ 0.425764] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11) *0, disabled. [ 0.425986] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11) [ 0.426202] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 *11) [ 0.426422] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11) *0, disabled. [ 0.426639] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 *10 11) [ 0.426858] ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11 [ 0.427073] ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 *11) [ 0.427291] ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 *11) [ 0.427508] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 11) *0, disabled. [ 0.427785] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.427844] pnp: PnP ACPI init [ 0.427859] ACPI: bus type pnp registered [ 0.436388] pnp: PnP ACPI: found 12 devices [ 0.436392] ACPI: ACPI bus type pnp unregistered [ 0.436399] PnPBIOS: Disabled by ACPI PNP [ 0.440333] PCI: Using ACPI for IRQ routing [ 0.440499] NET: Registered protocol family 8 [ 0.440499] NET: Registered protocol family 20 [ 0.440499] NetLabel: Initializing [ 0.440499] NetLabel: domain hash size = 128 [ 0.440499] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.440499] NetLabel: unlabeled traffic allowed by default [ 0.440499] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.440499] actual entries 65620 [ 0.440770] AppArmor: AppArmor Filesystem Enabled [ 0.440791] ACPI: RTC can wake from S4 [ 0.440811] system 00:05: ioport range 0x40b-0x40b has been reserved [ 0.440811] system 00:05: ioport range 0x480-0x48f has been reserved [ 0.440811] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.440811] system 00:05: ioport range 0x4d6-0x4d6 has been reserved [ 0.440811] system 00:05: ioport range 0x8000-0x807f could not be reserved [ 0.440811] system 00:05: ioport range 0xfe00-0xfe01 has been reserved [ 0.440811] system 00:05: ioport range 0xfe10-0xfe11 has been reserved [ 0.440811] system 00:06: iomem range 0x0-0x9ffff could not be reserved [ 0.440811] system 00:06: iomem range 0xdc000-0xdffff could not be reserved [ 0.440811] system 00:06: iomem range 0xe0000-0xfffff could not be reserved [ 0.440811] system 00:06: iomem range 0x100000-0x1bffffff could not be reserved [ 0.440811] system 00:06: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.440811] system 00:06: iomem range 0xe0800000-0xe0800fff has been reserved [ 0.476831] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.476836] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.476841] pci 0000:00:01.0: MEM window: 0xe0500000-0xe05fffff [ 0.476845] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.476852] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 [ 0.476854] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff [ 0.476858] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff [ 0.476863] pci 0000:00:0a.0: PREFETCH window: 0x30000000-0x33ffffff [ 0.476867] pci 0000:00:0a.0: MEM window: 0x34000000-0x37ffffff [ 0.476871] pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06 [ 0.476874] pci 0000:00:0a.1: IO window: 0x001800-0x0018ff [ 0.476878] pci 0000:00:0a.1: IO window: 0x001c00-0x001cff [ 0.476882] pci 0000:00:0a.1: PREFETCH window: 0x38000000-0x3bffffff [ 0.476887] pci 0000:00:0a.1: MEM window: 0x3c000000-0x3fffffff [ 0.477258] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 0.477263] PCI: setting IRQ 11 as level-triggered [ 0.477268] pci 0000:00:0a.0: PCI INT A -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 0.477540] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10 [ 0.477543] PCI: setting IRQ 10 as level-triggered [ 0.477548] pci 0000:00:0a.1: PCI INT B -> Link[LNK4] -> GSI 10 (level, low) -> IRQ 10 [ 0.477554] bus: 00 index 0 io port: [0, ffff] [ 0.477556] bus: 00 index 1 mmio: [0, ffffffff] [ 0.477559] bus: 01 index 0 io port: [a000, afff] [ 0.477562] bus: 01 index 1 mmio: [e0500000, e05fffff] [ 0.477564] bus: 01 index 2 mmio: [f0000000, f7ffffff] [ 0.477567] bus: 01 index 3 mmio: [0, 0] [ 0.477569] bus: 02 index 0 io port: [1000, 10ff] [ 0.477572] bus: 02 index 1 io port: [1400, 14ff] [ 0.477574] bus: 02 index 2 mmio: [30000000, 33ffffff] [ 0.477577] bus: 02 index 3 mmio: [34000000, 37ffffff] [ 0.477579] bus: 06 index 0 io port: [1800, 18ff] [ 0.477582] bus: 06 index 1 io port: [1c00, 1cff] [ 0.477584] bus: 06 index 2 mmio: [38000000, 3bffffff] [ 0.477587] bus: 06 index 3 mmio: [3c000000, 3fffffff] [ 0.477610] NET: Registered protocol family 2 [ 0.477849] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.478188] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.478315] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.478430] TCP: Hash tables configured (established 16384 bind 16384) [ 0.478434] TCP reno registered [ 0.478576] NET: Registered protocol family 1 [ 0.478749] checking if image is initramfs... it is [ 0.980128] Switched to high resolution mode on CPU 0 [ 1.236336] Freeing initrd memory: 7988k freed [ 1.236740] Simple Boot Flag at 0x35 set to 0x1 [ 1.237409] audit: initializing netlink socket (disabled) [ 1.237447] type=2000 audit(1228361770.236:1): initialized [ 1.242678] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.245896] VFS: Disk quotas dquot_6.5.1 [ 1.246053] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.246214] msgmni has been set to 875 [ 1.246406] io scheduler noop registered [ 1.246410] io scheduler anticipatory registered [ 1.246413] io scheduler deadline registered [ 1.246435] io scheduler cfq registered (default) [ 1.246492] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 1.246559] pci 0000:01:05.0: Boot video device [ 1.247102] isapnp: Scanning for PnP cards... [ 1.601376] isapnp: No Plug & Play device found [ 1.670035] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.670179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550 [ 1.671493] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 11 [ 1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> GSI 11 (level, low) -> IRQ 11 [ 1.671508] serial 0000:00:03.0: PCI INT A disabled [ 1.674033] brd: module loaded [ 1.674149] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.674355] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.678060] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.678070] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.678734] mice: PS/2 mouse device common for all mice [ 1.678989] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.679020] rtc0: alarms up to one month, y3k [ 1.679231] EISA: Probing bus 0 at eisa.0 [ 1.679243] Cannot allocate resource for EISA slot 1 [ 1.679271] Cannot allocate resource for EISA slot 8 [ 1.679274] EISA: Detected 0 cards. [ 1.679279] cpuidle: using governor ladder [ 1.679282] cpuidle: using governor menu [ 1.679972] TCP cubic registered [ 1.680063] Using IPI No-Shortcut mode [ 1.680487] registered taskstats version 1 [ 1.680625] Magic number: 4:233:613 [ 1.680643] isa: hash matches [ 1.680721] tty ptye3: hash matches [ 1.680820] pci 0000:00:0a.0: hash matches [ 1.680896] rtc_cmos 00:02: setting system clock to 2008-12-04 03:36:11 UTC (1228361771) [ 1.680901] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.680903] EDD information not available. [ 1.681786] Freeing unused kernel memory: 424k freed [ 1.681848] Write protecting the kernel text: 2576k [ 1.681884] Write protecting the kernel read-only data: 936k [ 1.712227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.916830] fuse init (API version 7.9) [ 2.153320] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 2.158379] processor ACPI0007:00: registered as cooling_device0 [ 2.158385] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.186683] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.195703] ACPI: Thermal Zone [TZ01] (39 C) [ 3.435666] usbcore: registered new interface driver usbfs [ 3.435708] usbcore: registered new interface driver hub [ 3.449846] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10 [ 3.449854] ohci1394 0000:00:0a.2: PCI INT C -> Link[LNK5] -> GSI 10 (level, low) -> IRQ 10 [ 3.502708] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0404000-e04047ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.522828] usbcore: registered new device driver usb [ 3.529450] No dock devices found. [ 3.558303] SCSI subsystem initialized [ 3.573485] USB Universal Host Controller Interface driver v3.0 [ 3.577306] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.641823] libata version 3.00 loaded. [ 3.685077] uhci_hcd 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 3.685094] uhci_hcd 0000:00:0c.0: UHCI Host Controller [ 3.685194] uhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1 [ 3.685226] uhci_hcd 0000:00:0c.0: irq 11, io base 0x00008080 [ 3.685520] usb usb1: configuration #1 chosen from 1 choice [ 3.685559] hub 1-0:1.0: USB hub found [ 3.685577] hub 1-0:1.0: 2 ports detected [ 3.892711] uhci_hcd 0000:00:0c.1: PCI INT B -> Link[LNK4] -> GSI 10 (level, low) -> IRQ 10 [ 3.892729] uhci_hcd 0000:00:0c.1: UHCI Host Controller [ 3.892769] uhci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2 [ 3.892800] uhci_hcd 0000:00:0c.1: irq 10, io base 0x000080a0 [ 3.892977] usb usb2: configuration #1 chosen from 1 choice [ 3.893015] hub 2-0:1.0: USB hub found [ 3.893030] hub 2-0:1.0: 2 ports detected [ 4.100720] ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNK5] -> GSI 10 (level, low) -> IRQ 10 [ 4.100748] ehci_hcd 0000:00:0c.2: EHCI Host Controller [ 4.100790] ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 3 [ 4.100848] ehci_hcd 0000:00:0c.2: irq 10, io mem 0xe0404800 [ 4.112096] ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 [ 4.112430] usb usb3: configuration #1 chosen from 1 choice [ 4.112470] hub 3-0:1.0: USB hub found [ 4.112485] hub 3-0:1.0: 4 ports detected [ 4.321310] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 4.321317] 8139cp 0000:00:12.0: Try the "8139too" driver instead. [ 4.327282] 8139too Fast Ethernet driver 0.9.28 [ 4.327690] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 4.327696] 8139too 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 4.328388] eth0: RealTek RTL8139 at 0x9c00, 08:00:46:c1:2f:38, IRQ 11 [ 4.328391] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 4.333699] pata_ali 0000:00:0f.0: can't derive routing for PCI INT A [ 4.334315] scsi0 : pata_ali [ 4.334514] scsi1 : pata_ali [ 4.335705] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x80c0 irq 14 [ 4.335709] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x80c8 irq 15 [ 4.436137] usb 3-3: new high speed USB device using ehci_hcd and address 2 [ 4.496480] ata1.00: ATA-5: HITACHI_DK23FA-60, 00M4A0A1, max UDMA/100 [ 4.496486] ata1.00: 117210240 sectors, multi 16: LBA [ 4.504392] ata1.00: configured for UDMA/100 [ 4.570936] usb 3-3: configuration #1 chosen from 1 choice [ 4.668513] ata2.00: ATAPI: SONY DVD RW DW-U50A, 1.5d, max UDMA/33 [ 4.668530] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled [ 4.668534] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 4.684549] ata2.00: configured for UDMA/33 [ 4.684800] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23FA-6 00M4 PQ: 0 ANSI: 5 [ 4.689907] scsi 1:0:0:0: CD-ROM SONY DVD RW DW-U50A 1.5d PQ: 0 ANSI: 5 [ 4.875853] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.875909] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.905017] usbcore: registered new interface driver libusual [ 4.915604] Initializing USB Mass Storage driver... [ 4.926183] scsi2 : SCSI emulation for USB Mass Storage devices [ 4.930846] Driver 'sd' needs updating - please use bus_type methods [ 4.931041] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 4.931071] sd 0:0:0:0: [sda] Write Protect is off [ 4.931074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.931121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.931230] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 4.931256] sd 0:0:0:0: [sda] Write Protect is off [ 4.931260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.931305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.931312] sda:<6>usbcore: registered new interface driver usb-storage [ 4.933380] USB Mass Storage support registered. [ 4.933587] usb-storage: device found at 2 [ 4.933590] usb-storage: waiting for device to settle before scanning [ 4.954192] Driver 'sr' needs updating - please use bus_type methods [ 4.956254] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030188cd58] [ 4.976443] Marking TSC unstable due to TSC halts in idle [ 4.981461] sda1 sda2 < sda5 sda6 sda7 sda8 > [ 5.060309] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.078879] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.078888] Uniform CD-ROM driver Revision: 3.20 [ 5.079060] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.525816] PM: Starting manual resume from disk [ 5.525824] PM: Resume from partition 8:6 [ 5.525826] PM: Checking hibernation image. [ 5.526062] PM: Resume from disk failed. [ 5.604150] kjournald starting. Commit interval 5 seconds [ 5.604179] EXT3-fs: mounted filesystem with ordered data mode. [ 9.932309] usb-storage: device scan complete [ 9.933393] scsi 2:0:0:0: Direct-Access USB2.0 Mobile Disk 1.00 PQ: 0 ANSI: 2 [ 9.934990] sd 2:0:0:0: [sdb] 4030463 512-byte hardware sectors (2064 MB) [ 9.935864] sd 2:0:0:0: [sdb] Write Protect is off [ 9.935867] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 9.935871] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.938722] sd 2:0:0:0: [sdb] 4030463 512-byte hardware sectors (2064 MB) [ 9.939596] sd 2:0:0:0: [sdb] Write Protect is off [ 9.939599] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 9.939602] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.939609] sdb: sdb1 [ 10.048277] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 10.048598] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 13.037997] udevd version 124 started [ 13.699612] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.774796] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.843248] Linux agpgart interface v0.103 [ 13.891353] agpgart-ati 0000:00:00.0: Ati IGP345M chipset [ 13.961486] agpgart-ati 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 14.388428] Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8158] [ 14.458941] ACPI: AC Adapter [ACAD] (on-line) [ 14.516681] Yenta: ISA IRQ mask 0x00a8, PCI irq 11 [ 14.516687] Socket status: 30000006 [ 14.517213] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 14.528123] ACPI: Power Button (FF) [PWRF] [ 14.528426] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 14.544105] ACPI: Power Button (CM) [PBTN] [ 14.544448] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 14.544632] ACPI: Lid Switch [LID] [ 14.563247] Yenta: CardBus bridge found at 0000:00:0a.1 [104d:8158] [ 14.692359] Yenta: ISA IRQ mask 0x00a8, PCI irq 10 [ 14.692364] Socket status: 30000006 [ 14.694501] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 14.698825] ali15x3_smbus 0000:00:06.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 14.698834] ali15x3_smbus 0000:00:06.0: ALI15X3 not detected, module not inserted. [ 14.904580] ACPI: Battery Slot [BAT1] (battery present) [ 15.944450] sony-laptop: Sony Notebook Control Driver v0.6. [ 15.971330] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/SNY5001:00/input/input5 [ 15.984278] input: Sony Vaio Jogdial as /devices/virtual/input/input6 [ 16.158529] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0a/device:0b/input/input7 [ 16.172136] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 16.183661] parport_pc 00:0a: reported by Plug and Play ACPI [ 16.183770] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 16.216264] ALI 5451 0000:00:04.0: power state changed by ACPI to D0 [ 16.216633] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11 [ 16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI 11 (level, low) -> IRQ 11 [ 16.909332] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 17.267206] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9 [ 17.325731] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10 [ 20.223118] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 20.225384] cs: IO port probe 0x3e0-0x4ff: clean. [ 20.226259] cs: IO port probe 0x820-0x8ff: clean. [ 20.227243] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 20.229477] cs: IO port probe 0x3e0-0x4ff: clean. [ 20.230351] cs: IO port probe 0x820-0x8ff: clean. [ 20.231207] cs: IO port probe 0xc00-0xcf7: clean. [ 20.232294] cs: IO port probe 0xa00-0xaff: clean. [ 20.234039] cs: IO port probe 0xc00-0xcf7: clean. [ 20.235080] cs: IO port probe 0xa00-0xaff: clean. [ 20.848038] AC'97 1 does not respond - RESET [ 20.864038] AC'97 1 access is not valid [0xffffffff], removing mixer. [ 20.864048] ali mixer 1 creating error. [ 22.042820] lp0: using parport0 (interrupt-driven). [ 22.270522] Adding 1253028k swap on /dev/sda6. Priority:-1 extents:1 across:1253028k [ 22.848407] EXT3 FS on sda5, internal journal [ 24.167105] type=1505 audit(1228349194.280:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4076 [ 24.390331] type=1505 audit(1228349194.504:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4081 [ 24.390845] type=1505 audit(1228349194.504:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4081 [ 24.572943] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.424608] ACPI: WMI: Mapper loaded [ 26.678424] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 26.744141] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 26.744152] apm: overridden by ACPI. [ 26.974597] ppdev: user-space parallel port driver [ 27.370850] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 27.373115] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers [ 27.376122] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 27.376136] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 27.376139] sonypi: device allocated minor is 60 [ 27.381187] input: Sony Vaio Jogdial as /devices/platform/sonypi/input/input11 [ 27.412392] input: Sony Vaio Keys as /devices/platform/sonypi/input/input12 [ 27.485856] sonypi command failed at /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1 (line 653) [ 27.529505] sonypi command failed at /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2 (line 664) [ 27.573141] sonypi command failed at /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2 (line 666) [ 27.616781] sonypi command failed at /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1 (line 653) [ 29.719152] Bluetooth: Core ver 2.13 [ 29.722230] NET: Registered protocol family 31 [ 29.722240] Bluetooth: HCI device and connection manager initialized [ 29.722246] Bluetooth: HCI socket layer initialized [ 29.747817] Bluetooth: L2CAP ver 2.11 [ 29.747828] Bluetooth: L2CAP socket layer initialized [ 29.775634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.775643] Bluetooth: BNEP filters: protocol multicast [ 29.798271] Bluetooth: RFCOMM socket layer initialized [ 29.798654] Bluetooth: RFCOMM TTY layer initialized [ 29.798663] Bluetooth: RFCOMM ver 1.10 [ 29.829262] Bridge firewalling registered [ 29.830471] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 29.848436] Bluetooth: SCO (Voice Link) ver 0.6 [ 29.848468] Bluetooth: SCO socket layer initialized [ 31.798487] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 [ 31.798514] pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10 [ 32.045868] [drm] Initialized drm 1.1.0 20060810 [ 32.065087] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 32.408164] agpgart-ati 0000:00:00.0: AGP 2.0 bridge [ 32.408203] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode [ 32.408255] pci 0000:01:05.0: putting AGP V2 device into 4x mode [ 32.559341] [drm] Setting GART location based on new memory map [ 32.559362] [drm] Loading R100 Microcode [ 32.559410] [drm] writeback test succeeded in 1 usecs [ 33.960725] eth0: link down [ 133.708158] ppdev0: registered pardevice [ 133.756068] ppdev0: unregistered pardevice [ 135.520452] ppdev0: registered pardevice [ 135.568396] ppdev0: unregistered pardevice [ 135.796362] type=1503 audit(1228349305.912:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5785/net/" pid=5785 profile="/usr/sbin/cupsd" [ 135.906488] NET: Registered protocol family 10 [ 135.908629] lo: Disabled Privacy Extensions [ 135.910608] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 135.913224] type=1503 audit(1228349306.028:6): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5785 profile="/usr/sbin/cupsd" [ 135.913252] type=1503 audit(1228349306.028:7): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5785 profile="/usr/sbin/cupsd" [ 135.913261] type=1503 audit(1228349306.028:8): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5785 profile="/usr/sbin/cupsd" [ 135.913268] type=1503 audit(1228349306.028:9): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5785 profile="/usr/sbin/cupsd" [ 135.913275] type=1503 audit(1228349306.028:10): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5785 profile="/usr/sbin/cupsd" [ 135.913282] type=1503 audit(1228349306.028:11): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5785 profile="/usr/sbin/cupsd" [ 135.913289] type=1503 audit(1228349306.028:12): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5785 profile="/usr/sbin/cupsd" [ 135.913296] type=1503 audit(1228349306.028:13): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5785 profile="/usr/sbin/cupsd" [ 135.913425] type=1503 audit(1228349306.028:14): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=7 name="/proc/5785/net/dev" pid=5785 profile="/usr/sbin/cupsd" [ 135.939426] ppdev0: registered pardevice [ 135.988553] ppdev0: unregistered pardevice Module Size Used by ipv6 263972 8 nls_iso8859_1 12032 1 nls_cp437 13696 1 vfat 18816 1 fat 57376 1 vfat binfmt_misc 16904 1 radeon 147616 2 drm 86056 3 radeon sco 18308 2 bridge 56980 0 stp 10628 1 bridge rfcomm 44432 0 bnep 20480 2 l2cap 30464 6 rfcomm,bnep bluetooth 61924 6 sco,rfcomm,bnep,l2cap sonypi 26648 0 ppdev 15620 0 speedstep_lib 12676 0 cpufreq_userspace 11396 0 cpufreq_ondemand 14988 0 cpufreq_stats 13188 0 cpufreq_powersave 9856 0 cpufreq_conservative 14600 0 freq_table 12672 2 cpufreq_ondemand,cpufreq_stats wmi 14504 0 pci_slot 12552 0 sbs 19464 0 sbshc 13440 1 sbs iptable_filter 10752 0 ip_tables 19600 1 iptable_filter x_tables 22916 1 ip_tables sbp2 29324 0 lp 17156 0 joydev 18368 0 pcmcia 43052 0 evdev 17696 16 psmouse 45200 0 serio_raw 13444 0 pcspkr 10624 0 snd_ali5451 27532 3 parport_pc 39204 1 video 25104 0 snd_ac97_codec 111652 1 snd_ali5451 parport 42604 3 ppdev,lp,parport_pc output 11008 1 video ac97_bus 9856 1 snd_ac97_codec snd_pcm_oss 46848 0 sony_laptop 39004 0 snd_mixer_oss 22784 1 snd_pcm_oss snd_pcm 83204 3 snd_ali5451,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 10884 0 container 11520 0 snd_seq_oss 38528 0 snd_seq_midi 14336 0 i2c_ali1535 14340 0 snd_rawmidi 29824 1 snd_seq_midi snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi i2c_ali15x3 14852 0 battery 18436 0 snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event button 14224 0 ac 12292 0 yenta_socket 31756 2 snd_timer 29960 2 snd_pcm,snd_seq snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq rsrc_nonstatic 19072 1 yenta_socket i2c_core 31892 2 i2c_ali1535,i2c_ali15x3 pcmcia_core 43412 3 pcmcia,yenta_socket,rsrc_nonstatic snd 63268 16 snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15328 1 snd snd_page_alloc 16136 1 snd_pcm ati_agp 14988 1 agpgart 42184 2 drm,ati_agp shpchp 37908 0 pci_hotplug 35236 1 shpchp ext3 133256 1 jbd 55444 1 ext3 mbcache 16004 1 ext3 sr_mod 22212 0 cdrom 43168 1 sr_mod sd_mod 42264 6 crc_t10dif 9984 1 sd_mod usb_storage 81728 1 libusual 27156 1 usb_storage sg 39732 0 pata_acpi 12160 0 pata_ali 16516 3 8139too 31616 0 ata_generic 12932 0 libata 177312 3 pata_acpi,pata_ali,ata_generic 8139cp 27520 0 uhci_hcd 30736 0 ehci_hcd 43276 0 mii 13440 2 8139too,8139cp scsi_mod 155212 6 sbp2,sr_mod,sd_mod,usb_storage,sg,libata dock 16656 1 libata ohci1394 37936 0 usbcore 148848 5 usb_storage,libusual,uhci_hcd,ehci_hcd ieee1394 96324 2 sbp2,ohci1394 thermal 23708 0 processor 42156 2 thermal fan 12548 0 fbcon 47648 0 tileblit 10880 1 fbcon font 16512 1 fbcon bitblit 13824 1 fbcon softcursor 9984 1 bitblit fuse 60828 5 ######################################################### I undrestand almost nothing this time! So, please help me. Thank you.
