I got hsfmodem_7.68.00.09oem_i386.deb, but during installation I got this:
################################################################
(Reading database ... 101709 files and directories currently installed.)
Preparing to replace hsfmodem 7.68.00.09oem (using
hsfmodem_7.68.00.09oem_i386.deb) ...
Unpacking replacement hsfmodem ...
Setting up hsfmodem (7.68.00.09oem) ...
Conexant HSF softmodem driver, version 7.68.00.09oem
If you need assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
No pre-built modules for: Ubuntu-8.10 linux-2.6.27-7-generic i686-SMP
Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)
Building modules for kernel 2.6.27-7-generic, using source directory
/lib/modules/2.6.27-7-generic/build. Please wait...
ERROR: Module build failed!
Please examine the log file "/tmp/hsfconfig-buildlog.txt" to determine why.
################################################################
hsfconfig-buildlog.txt is attached.
I couldn't get "linux-headers-2.6.27.-7- generic" because there is no
package with exactly with that name and there are a lot of packages
with similar names! And each one needs a lot of other packages to be
installed. So please tell me what should I exactly get and from where.
Thanks a lot for your helps.
On 12/8/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> Hooman,
>
> 10b9:5457 : ALi Corporation M5457 AC'97 Modem Controller
> 104d:8158 Subsystem having Conexant chip
>
> is an older modem and may not need the newest HSF modem code from Linuxant.
>
> From http://linux.dell.com/files/ubuntu/hardy/modem-drivers/hsf/ download
> hsfmodem_7.68.00.09oem_i386.deb
>
> Before trying to use it, first uninstall the current 14.4 limited drivers:
> $ hsfconfiig --uninstall
>
>
> Reboot. Then do the new install:
> $ sudo dpkg -i hsfmodem_7.68.00.09oem_i386.deb
> There may be a failure if resources needed for compiling have not been
> fully installed:
> make, gcc-4.3, linux-headers-2.6.27.-7- generic
> But if success, reboot and retest the modem as before with pon
>
> wvdial can be stopped in the console it was started by
> $ Ctrl-C
>
> MarvS
>
>
>
>
>
>
>
> On Sun, Dec 7, 2008 at 10:21 AM, Hooman Tadbiri
> <hooman.tadbiri@xxxxxxxxx> wrote:
>> I used it under kubuntu; wvdial didn't work, but I got connected using
>> pon/poff. Thanks a lot for that!
>> Now, is there any way to reach the 14.4 limit?
>> By the way: wvdial started its job and it was repeating the connecting
>> process every minute! I couldn't stop it, and I restarted the
>> computer! How could I turn the wvdial off, without restarting?
>> Really thanks, again! Even this 14.4 is better than nothing! Thanks a
>> lot for your helps.
>>
>> On Sat, Dec 6, 2008 at 8:51 PM, Marvin Stodolsky
>> <marvin.stodolsky@xxxxxxxxx> wrote:
>>> Hooman,
>>>
>>> test the drivers at 14.4Kbps
>>> It they can be made to work on your System
>>> we can solve the rest of the problems
>>>
>>> marvS
>>>
>>> On 12/5/08, Hooman Tadbiri <hooman.tadbiri@xxxxxxxxx> wrote:
>>>> Thanks, but there will be a very big problem! Linuxant says that there
>>>> is a 14.4Kbps limit for free drivers. Should only I use this? What can
>>>> I do? Is there any cracks available for this driver?
>>>> (+because of global sanctions against Iran I can't pay any money to
>>>> foreign companies)
>>>> Thank you,
>>>> Hooman.
>>>>
>>>> On Fri, Dec 5, 2008 at 10:55 PM, Marvin Stodolsky
>>>> <marvin.stodolsky@xxxxxxxxx> wrote:
>>>> > Hooman
>>>> >
>>>> > for 10b9:5451 Multimedia audio controller: ALi Corporation M5451 PCI
>>>> > AC-Link Controller Audio Device
>>>> > with subsystem 104d:8158 having a Conexant modem chip,
>>>> >
>>>> > Get hsfmodem_7.68.00.14full_k2.6.27_7_generic_ubuntu_i386.deb.zip
>>>> > from http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>>>> >
>>>> > Under Linux
>>>> > $ unzip hsf*.zip
>>>> > to unpack, and to install
>>>> > $ sudo dpkg -i hsf*.deb
>>>> >
>>>> > Afterwards reboot, and check for basic modem recognition with:
>>>> > $ sudo wvdialconf /etc/wvdial.conf
>>>> >
>>>> > If the modem is detected, put in personal info with
>>>> > $ sudo gedit /etc/wvdial.conf
>>>> > while removing the symbols ; < >
>>>> > Save and try a dialout with:
>>>> >
>>>> > $ sudo wvdial
>>>> >
>>>> > MarvS
>>>> >
>>>> >
>>>> >
>>>> > On Fri, Dec 5, 2008 at 10:27 AM, Hooman Tadbiri
>>>> > <hooman.tadbiri@xxxxxxxxx> wrote:
>>>> >> I typed them below, please see:
>>>> >> ->General:
>>>> >> SoftK56 Data Fax CARP
>>>> >> Device rype: Medems
>>>> >> Manufacturer: CXT
>>>> >> Location: PCI bus 0, device 3, function 0
>>>> >> ->Diagnostics:
>>>> >> Modem Information
>>>> >> (Field> Value)
>>>> >> Hardware ID> PCI\VEN_10B9&DEV_5457&SUBSYS_8158104D&REV_00
>>>> >> >Query Modem:
>>>> >> (Command> Response)
>>>> >> ATQ0V1E0> Success
>>>> >> AT+GMM> +GMM: SoftK56 Data Fax CARP
>>>> >> AT+FCLASS=?> 0,1
>>>> >> AT#CLS=?> COMMAND NOT SUPPORTED
>>>> >> AT+GCI?> +GCI: B4
>>>> >> AT+GCI=?> +GCI:
>>>> >> (B5,0A,0F,20,26,2E,31,3C,3D,04,46,50,51,52,53,54,57,58,59,00,61,69,6C,73,7B,7E,82,89,89,8B,9C,9F,A0,A5,A6,FE,A9,B4,09,AE,8A,B3,B8,FC,1B,FA,FB,07,0D,14,16,1A,25,27,2B,2D,33,35,36,37,49,4E,62,4F,63,68,1C,88,98,84,85,87,8E,A1,B7,BB,BC,B2,F8,70,0C,8C,6A)
>>>> >> ATI1> 255
>>>> >> ATI2> Success
>>>> >> ATI3> SoftK56V B2.1 V6.01.20
>>>> >> ATI4> SoftK56 Data Fax CARP
>>>> >> ATI5> 180
>>>> >> ATI6> SoftK56
>>>> >> > CModem Version 12
>>>> >> > RKsample Version 342
>>>> >> ATI7> 225
>>>> >> ->Driver
>>>> >> SoftK56 Data Fax CARP
>>>> >> Driver Provider: CXT
>>>> >> Driver Date: 20/03/2003
>>>> >> Driver Version: 6.1.20.0
>>>> >> Digital Signer: Microsoft Windows Hardware Campatibility Publisher
>>>> >> >Driver Details...:
>>>> >> SoftK56 Date Fax CARP
>>>> >> Driver files:
>>>> >> C:\Program
>>>> >> Files\CONEXANT\CNXT_MODEM_PCI_VEN_10B9&DEV_5457&SUBSYS_8158104D\HXFSetup.exe
>>>> >> C:\WINDOWS\system32\carpdll.dll
>>>> >> C:\WINDOWS\system32\carpserv.exe
>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\HSF_CNXT.sys
>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\HSF_DP.sys
>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\HSFHWALI.sys
>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\mdmxsdk.sys
>>>> >> C:\WINDOWS\system32\drivers\Modem.sys
>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\Snyunif.cty
>>>> >> C:\WINDOWS\SYSTEM32\DRIVERS\strmdisp.sys
>>>> >> C:\WINDOWS\system32\HSFCI005.dll
>>>> >> C:\WINDOWS\system32\mdmxsdk.dll
>>>> >> Provider: Conexant Systems, Inc.
>>>> >> File version: 2.0.0.0
>>>> >> Copyright: Copyright(c) Conexant Systems, Inc. 2002
>>>> >> Digital Signer: Microsoft Windows Hardware Campatibility
>>>> >>
>>>> >> Now, please tell me what to do.
>>>> >> Thanks a lot for your helps.
>>>> >> Hooman.
>>>> >>
>>>> >> On Fri, Dec 5, 2008 at 8:21 AM, Marvin Stodolsky
>>>> >> <marvin.stodolsky@xxxxxxxxx> wrote:
>>>> >>> Hooman
>>>> >>> Please Subscribe to the List through the SUBSCRIBE link at
>>>> >>> www.linmodems.org
>>>> >>> so that your messages to not have to be manually forwarded.
>>>> >>>
>>>> >>>
>>>> >>> Using MicroSoft(MS) Windows diagnostics:
>>>> >>> -----------------------------
>>>> >>> MS installations do generally have adequate diagostic capability.
>>>> >>> Try
>>>> >>> the following
>>>> >>> routine 1), beginning with mouse clicks on:
>>>> >>> 1) Start > Settings > Control Panel > Classical View (for Window
>>>> >>> XP) > System
>>>> >>>> Hardware > Device Manager > Modems > Click on the + > Modem. Double
>>>> >>>> click to
>>>> >>> expand the graphic. Manufacturer information may be displayed. For
>>>> >>> example, CXT
>>>> >>> stands for Conexant. Click the Diagnostics Tab. Record any hardware
>>>> >>> ID
>>>> >>> or vendor
>>>> >>> and device information.
>>>> >>> Next do the Query Modem and record the ATI specifications displayed
>>>> >>> such as:
>>>> >>> ATI3 - Agere SoftModem Version 2.1.22
>>>> >>> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
>>>> >>>
>>>> >>> Also Click on the Driver Details TAB, and copy out the information
>>>> >>> therein.
>>>> >>>
>>>> >>> Send the information thus acquired to the List, not directly to me.
>>>> >>> .
>>>> >>> MarvS
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>> On Thu, Dec 4, 2008 at 12:59 PM, Hooman Tadbiri
>>>> >>> <hooman.tadbiri@xxxxxxxxx> wrote:
>>>> >>>> There is no softModem in Modem/DOCs! There is only YourSystem.txt
>>>> >>>> there. Everything is attached, You can see it! What should I do?!
>>>> >>>> Thanks.
>>>> >>>>
>>>> >>>> On Thu, Dec 4, 2008 at 11:07 PM, Marvin Stodolsky
>>>> >>>> <marvin.stodolsky@xxxxxxxxx> wrote:
>>>> >>>>> It should be in the folder Modem/DOC/
>>>> >>>>> NOT BEING under Linux now, I can access your attachment
>>>> >>>>>
>>>> >>>>> MarvS
>>>> >>>>>
>>>> >>>>> On Thu, Dec 4, 2008 at 8:30 AM, Hooman Tadbiri
>>>> >>>>> <hooman.tadbiri@xxxxxxxxx> wrote:
>>>> >>>>>> Thank you for the answer, but I can't find the SoftModem.txt
>>>> >>>>>> file;
>>>> >>>>>> please tell me where to find it. Here I attached all the files
>>>> >>>>>> scanModem generated, please visit.
>>>> >>>>>> (+By the way this may help: I'm using an old Sony laptop
>>>> >>>>>> computer)
>>>> >>>>>> Thanks,
>>>> >>>>>> Hooman.
>>>> >>>>>>
>>>> >>>>>> On 12/4/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
>>>> >>>>>>> Hooman,
>>>> >>>>>>>
>>>> >>>>>>> Following the instructions in SoftModem.txt
>>>> >>>>>>> run the modem disgnostics under Microsoft.
>>>> >>>>>>> It is desirable to first determine if your modem has a Conexant
>>>> >>>>>>> chip.
>>>> >>>>>>>
>>>> >>>>>>> MarvS
>>>> >>>>>>>
>>>> >>>>>>> On Wed, Dec 3, 2008 at 1:28 PM, Hooman Tadbiri
>>>> >>>>>>> <hooman.tadbiri@xxxxxxxxx>
>>>> >>>>>>> wrote:
>>>> >>>>>>>> To whom it may concern,
>>>> >>>>>>>>
>>>> >>>>>>>>
>>>> >>>>>>>> I had used scanModem several times on several computers and I
>>>> >>>>>>>> have
>>>> >>>>>>>> never got such messages like these:
>>>> >>>>>>>>
>>>> >>>>>>>> ####################Linux Terminal####################
>>>> >>>>>>>> hooman@hooman-laptop:~/Desktop$ sudo ./scanModem
>>>> >>>>>>>>
>>>> >>>>>>>> [sudo] password for hooman:
>>>> >>>>>>>>
>>>> >>>>>>>> UPDATE=2008_11_06
>>>> >>>>>>>>
>>>> >>>>>>>> There are weekly updates of scanModem. Your copy is more than
>>>> >>>>>>>>
>>>> >>>>>>>> 4 weeks old!!
>>>> >>>>>>>>
>>>> >>>>>>>> If decisive guidance is not provided by this scanModem of
>>>> >>>>>>>> 2008_11_06,
>>>> >>>>>>>>
>>>> >>>>>>>> download an update from http://linmodems.technion.ac.il
>>>> >>>>>>>>
>>>> >>>>>>>> Continuing in 10 seconds.
>>>> >>>>>>>>
>>>> >>>>>>>>
>>>> >>>>>>>>
>>>> >>>>>>>> Identifying PCI bus slots with candidate modems.
>>>> >>>>>>>>
>>>> >>>>>>>> Running PCIbus cases
>>>> >>>>>>>>
>>>> >>>>>>>> Analysing card in PCI bus 00:03.0, writing to scanout.00:03.0
>>>> >>>>>>>>
>>>> >>>>>>>> Please load the candidate driver slamr, with Admin/root
>>>> >>>>>>>> command:
>>>> >>>>>>>>
>>>> >>>>>>>> sudo modprobe slamr
>>>> >>>>>>>>
>>>> >>>>>>>> Then rerun
>>>> >>>>>>>>
>>>> >>>>>>>> ./scanModem
>>>> >>>>>>>>
>>>> >>>>>>>> hooman@hooman-laptop:~/Desktop$ sudo modprobe slamr
>>>> >>>>>>>>
>>>> >>>>>>>> FATAL: Module slamr not found.
>>>> >>>>>>>> ####################ModemDate.txt####################
>>>> >>>>>>>> Only plain text email is forwarded by the
>>>> >>>>>>>> Discuss@xxxxxxxxxxxxx List
>>>> >>>>>>>> Server,
>>>> >>>>>>>> as HTML can contain viruses. Use as the email Subject Line:
>>>> >>>>>>>> YourName, YourCountry kernel 2.6.27-7-generic
>>>> >>>>>>>> With this Subject Line cogent experts will be alerted, and
>>>> >>>>>>>> useful
>>>> >>>>>>>> case names left in the Archive.
>>>> >>>>>>>> YourCountry will enable Country specific guidance. Linux
>>>> >>>>>>>> experts in
>>>> >>>>>>>> YourCountry
>>>> >>>>>>>> can be found through: http://www.linux.org/groups/index.html.
>>>> >>>>>>>> They will know your Country's modem code, which may be
>>>> >>>>>>>> essential for
>>>> >>>>>>>> dialup service.
>>>> >>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by
>>>> >>>>>>>> an
>>>> >>>>>>>> Internet Provider mail filters.
>>>> >>>>>>>> So in a day, also check the Archived responses at
>>>> >>>>>>>> http://www.linmodems.org
>>>> >>>>>>>> -------------------------- System information
>>>> >>>>>>>> ----------------------------
>>>> >>>>>>>> CPU=i686,
>>>> >>>>>>>> Linux version 2.6.27-7-generic (buildd@rothera) (gcc version
>>>> >>>>>>>> 4.3.2
>>>> >>>>>>>> (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
>>>> >>>>>>>> scanModem update of: 2008_11_06
>>>> >>>>>>>>
>>>> >>>>>>>> There are no blacklisted modem drivers in /etc/modprobe*
>>>> >>>>>>>> files
>>>> >>>>>>>> Attached USB devices are:
>>>> >>>>>>>> ID 126f:0163 TwinMOS
>>>> >>>>>>>> ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>> >>>>>>>> ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>> >>>>>>>> ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>> >>>>>>>>
>>>> >>>>>>>> USB modems not recognized
>>>> >>>>>>>>
>>>> >>>>>>>> For candidate card in slot 00:03.0, firmware information and
>>>> >>>>>>>> bootup
>>>> >>>>>>>> diagnostics are:
>>>> >>>>>>>> PCI slot PCI ID SubsystemID Name
>>>> >>>>>>>> ---------- --------- --------- --------------
>>>> >>>>>>>> 00:03.0 10b9:5457 104d:8158 Modem: ALi Corporation M5457 AC'97
>>>> >>>>>>>> Modem
>>>> >>>>>>>> Controller
>>>> >>>>>>>>
>>>> >>>>>>>> Modem interrupt assignment and sharing:
>>>> >>>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI
>>>> >>>>>>>> 5451,
>>>> >>>>>>>> sonypi, eth0
>>>> >>>>>>>> --- Bootup diagnostics for card in PCI slot 00:03.0 ----
>>>> >>>>>>>> [ 0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000,
>>>> >>>>>>>> e0400fff]
>>>> >>>>>>>> [ 0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff]
>>>> >>>>>>>> [ 0.421142] pci 0000:00:03.0: PME# supported from D3hot
>>>> >>>>>>>> D3cold
>>>> >>>>>>>> [ 0.421147] pci 0000:00:03.0: PME# disabled
>>>> >>>>>>>> [ 1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] ->
>>>> >>>>>>>> GSI 11
>>>> >>>>>>>> (level, low) -> IRQ 11
>>>> >>>>>>>> [ 1.671508] serial 0000:00:03.0: PCI INT A disabled
>>>> >>>>>>>>
>>>> >>>>>>>> The PCI slot 00:03.0 of the modem card may be disabled early
>>>> >>>>>>>> in
>>>> >>>>>>>> a bootup process, but then enabled later. If modem drivers
>>>> >>>>>>>> load
>>>> >>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about
>>>> >>>>>>>> possible
>>>> >>>>>>>> fixes.
>>>> >>>>>>>> Send dmesg.txt along with ModemData.txt to
>>>> >>>>>>>> discuss@xxxxxxxxxxxxx
>>>> >>>>>>>> if help is needed.
>>>> >>>>>>>>
>>>> >>>>>>>>
>>>> >>>>>>>> For candidate card in slot 00:04.0, firmware information and
>>>> >>>>>>>> bootup
>>>> >>>>>>>> diagnostics are:
>>>> >>>>>>>> PCI slot PCI ID SubsystemID Name
>>>> >>>>>>>> ---------- --------- --------- --------------
>>>> >>>>>>>> 00:04.0 10b9:5451 104d:8158 Multimedia audio controller: ALi
>>>> >>>>>>>> Corporation M5451 PCI AC-Link Controller Audio Device
>>>> >>>>>>>>
>>>> >>>>>>>> Modem interrupt assignment and sharing:
>>>> >>>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI
>>>> >>>>>>>> 5451,
>>>> >>>>>>>> sonypi, eth0
>>>> >>>>>>>> --- Bootup diagnostics for card in PCI slot 00:04.0 ----
>>>> >>>>>>>> [ 0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff]
>>>> >>>>>>>> [ 0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000,
>>>> >>>>>>>> e0401fff]
>>>> >>>>>>>> [ 0.421204] pci 0000:00:04.0: supports D1
>>>> >>>>>>>> [ 0.421206] pci 0000:00:04.0: supports D2
>>>> >>>>>>>> [ 0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot
>>>> >>>>>>>> D3cold
>>>> >>>>>>>> [ 0.421212] pci 0000:00:04.0: PME# disabled
>>>> >>>>>>>> [ 16.216264] ALI 5451 0000:00:04.0: power state changed by
>>>> >>>>>>>> ACPI to D0
>>>> >>>>>>>> [ 16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7]
>>>> >>>>>>>> -> GSI
>>>> >>>>>>>> 11 (level, low) -> IRQ 11
>>>> >>>>>>>>
>>>> >>>>>>>> The PCI slot 00:04.0 of the modem card may be disabled early
>>>> >>>>>>>> in
>>>> >>>>>>>> a bootup process, but then enabled later. If modem drivers
>>>> >>>>>>>> load
>>>> >>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about
>>>> >>>>>>>> possible
>>>> >>>>>>>> fixes.
>>>> >>>>>>>> Send dmesg.txt along with ModemData.txt to
>>>> >>>>>>>> discuss@xxxxxxxxxxxxx
>>>> >>>>>>>> if help is needed.
>>>> >>>>>>>> ####################dmesg.txt####################
>>>> >>>>>>>> CPU0
>>>> >>>>>>>> 0: 19627 XT-PIC-XT timer
>>>> >>>>>>>> 1: 466 XT-PIC-XT i8042
>>>> >>>>>>>> 2: 0 XT-PIC-XT cascade
>>>> >>>>>>>> 3: 2 XT-PIC-XT
>>>> >>>>>>>> 5: 2 XT-PIC-XT
>>>> >>>>>>>> 7: 3 XT-PIC-XT parport0
>>>> >>>>>>>> 8: 2 XT-PIC-XT rtc0
>>>> >>>>>>>> 9: 996 XT-PIC-XT acpi
>>>> >>>>>>>> 10: 12650 XT-PIC-XT ohci1394, uhci_hcd:usb2,
>>>> >>>>>>>> ehci_hcd:usb3, yenta, radeon@pci:0000:01:05.0
>>>> >>>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI
>>>> >>>>>>>> 5451,
>>>> >>>>>>>> sonypi, eth0
>>>> >>>>>>>> 12: 5615 XT-PIC-XT i8042
>>>> >>>>>>>> 14: 8703 XT-PIC-XT pata_ali
>>>> >>>>>>>> 15: 1971 XT-PIC-XT pata_ali
>>>> >>>>>>>> NMI: 0 Non-maskable interrupts
>>>> >>>>>>>> LOC: 0 Local timer interrupts
>>>> >>>>>>>> RES: 0 Rescheduling interrupts
>>>> >>>>>>>> CAL: 0 function call interrupts
>>>> >>>>>>>> TLB: 0 TLB shootdowns
>>>> >>>>>>>> SPU: 0 Spurious interrupts
>>>> >>>>>>>> ERR: 0
>>>> >>>>>>>> MIS: 0
>>>> >>>>>>>>
>>>> >>>>>>>> [ 0.000000] Initializing cgroup subsys cpuset
>>>> >>>>>>>> [ 0.000000] Initializing cgroup subsys cpu
>>>> >>>>>>>> [ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera)
>>>> >>>>>>>> (gcc
>>>> >>>>>>>> version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24
>>>> >>>>>>>> 06:42:44
>>>> >>>>>>>> UTC 2008 (Ubuntu 2.6.27-7.14-generic)
>>>> >>>>>>>> [ 0.000000] BIOS-provided physical RAM map:
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800
>>>> >>>>>>>> (usable)
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000
>>>> >>>>>>>> (reserved)
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000
>>>> >>>>>>>> (reserved)
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000
>>>> >>>>>>>> (usable)
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7c000
>>>> >>>>>>>> (ACPI data)
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000001bf7c000 - 000000001bf80000
>>>> >>>>>>>> (ACPI NVS)
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000
>>>> >>>>>>>> (reserved)
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000
>>>> >>>>>>>> (reserved)
>>>> >>>>>>>> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000
>>>> >>>>>>>> (reserved)
>>>> >>>>>>>> [ 0.000000] last_pfn = 0x1bf70 max_arch_pfn = 0x100000
>>>> >>>>>>>> [ 0.000000] kernel direct mapping tables up to 1bf70000 @
>>>> >>>>>>>> 7000-d000
>>>> >>>>>>>> [ 0.000000] RAMDISK: 1b792000 - 1bf5f052
>>>> >>>>>>>> [ 0.000000] DMI present.
>>>> >>>>>>>> [ 0.000000] ACPI: RSDP 000F6FD0, 0014 (r0 PTLTD )
>>>> >>>>>>>> [ 0.000000] ACPI: RSDT 1BF773FE, 002C (r1 SONY K7
>>>> >>>>>>>> 6040000
>>>> >>>>>>>> LTP 0)
>>>> >>>>>>>> [ 0.000000] ACPI: FACP 1BF7BF64, 0074 (r1 SONY K7
>>>> >>>>>>>> 6040000
>>>> >>>>>>>> PTL F4240)
>>>> >>>>>>>> [ 0.000000] ACPI: DSDT 1BF7742A, 4B3A (r1 SONY K7
>>>> >>>>>>>> 6040000
>>>> >>>>>>>> MSFT 100000E)
>>>> >>>>>>>> [ 0.000000] ACPI: FACS 1BF7CFC0, 0040
>>>> >>>>>>>> [ 0.000000] ACPI: BOOT 1BF7BFD8, 0028 (r1 PTLTD $SBFTBL$
>>>> >>>>>>>> 6040000
>>>> >>>>>>>> LTP 1)
>>>> >>>>>>>> [ 0.000000] ACPI: DMI detected: Sony
>>>> >>>>>>>> [ 0.000000] 0MB HIGHMEM available.
>>>> >>>>>>>> [ 0.000000] 447MB LOWMEM available.
>>>> >>>>>>>> [ 0.000000] mapped low ram: 0 - 1bf70000
>>>> >>>>>>>> [ 0.000000] low ram: 00000000 - 1bf70000
>>>> >>>>>>>> [ 0.000000] bootmap 00002000 - 000057f0
>>>> >>>>>>>> [ 0.000000] (9 early reservations) ==> bootmem [0000000000 -
>>>> >>>>>>>> 001bf70000]
>>>> >>>>>>>> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [0000000000 - 0000001000]
>>>> >>>>>>>> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [0000001000 - 0000002000]
>>>> >>>>>>>> [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [0000006000 - 0000007000]
>>>> >>>>>>>> [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [0000100000 - 00005c0a20]
>>>> >>>>>>>> [ 0.000000] #4 [001b792000 - 001bf5f052] RAMDISK
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [001b792000 - 001bf5f052]
>>>> >>>>>>>> [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [00005c1000 - 00005c4000]
>>>> >>>>>>>> [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [000009f800 - 0000100000]
>>>> >>>>>>>> [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [0000007000 - 0000009000]
>>>> >>>>>>>> [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP
>>>> >>>>>>>> ==>
>>>> >>>>>>>> [0000002000 - 0000006000]
>>>> >>>>>>>> [ 0.000000] Zone PFN ranges:
>>>> >>>>>>>> [ 0.000000] DMA 0x00000000 -> 0x00001000
>>>> >>>>>>>> [ 0.000000] Normal 0x00001000 -> 0x0001bf70
>>>> >>>>>>>> [ 0.000000] HighMem 0x0001bf70 -> 0x0001bf70
>>>> >>>>>>>> [ 0.000000] Movable zone start PFN for each node
>>>> >>>>>>>> [ 0.000000] early_node_map[2] active PFN ranges
>>>> >>>>>>>> [ 0.000000] 0: 0x00000000 -> 0x0000009f
>>>> >>>>>>>> [ 0.000000] 0: 0x00000100 -> 0x0001bf70
>>>> >>>>>>>> [ 0.000000] On node 0 totalpages: 114447
>>>> >>>>>>>> [ 0.000000] free_area_init_node: node 0, pgdat c048a500,
>>>> >>>>>>>> node_mem_map c1000000
>>>> >>>>>>>> [ 0.000000] DMA zone: 3963 pages, LIFO batch:0
>>>> >>>>>>>> [ 0.000000] Normal zone: 109477 pages, LIFO batch:31
>>>> >>>>>>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x8008
>>>> >>>>>>>> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
>>>> >>>>>>>> [ 0.000000] Local APIC disabled by BIOS -- you can enable it
>>>> >>>>>>>> with
>>>> >>>>>>>> "lapic"
>>>> >>>>>>>> [ 0.000000] mapped APIC to ffffb000 (013f2000)
>>>> >>>>>>>> [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
>>>> >>>>>>>> 00000000000a0000
>>>> >>>>>>>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
>>>> >>>>>>>> 00000000000dc000
>>>> >>>>>>>> [ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
>>>> >>>>>>>> 0000000000100000
>>>> >>>>>>>> [ 0.000000] Allocating PCI resources starting at 30000000
>>>> >>>>>>>> (gap:
>>>> >>>>>>>> 2c000000:d3f80000)
>>>> >>>>>>>> [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
>>>> >>>>>>>> [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
>>>> >>>>>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility
>>>> >>>>>>>> grouping on.
>>>> >>>>>>>> Total pages: 113440
>>>> >>>>>>>> [ 0.000000] Kernel command line:
>>>> >>>>>>>> root=UUID=b7e12806-451d-4eef-b86b-a9b65d6c0a3e ro quiet splash
>>>> >>>>>>>> [ 0.000000] Enabling fast FPU save and restore... done.
>>>> >>>>>>>> [ 0.000000] Enabling unmasked SIMD FPU exception support...
>>>> >>>>>>>> done.
>>>> >>>>>>>> [ 0.000000] Initializing CPU#0
>>>> >>>>>>>> [ 0.000000] PID hash table entries: 2048 (order: 11, 8192
>>>> >>>>>>>> bytes)
>>>> >>>>>>>> [ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
>>>> >>>>>>>> [ 0.000000] TSC: using PIT calibration value
>>>> >>>>>>>> [ 0.000000] Detected 2658.126 MHz processor.
>>>> >>>>>>>> [ 0.004000] Console: colour VGA+ 80x25
>>>> >>>>>>>> [ 0.004000] console [tty0] enabled
>>>> >>>>>>>> [ 0.004000] Dentry cache hash table entries: 65536 (order:
>>>> >>>>>>>> 6, 262144
>>>> >>>>>>>> bytes)
>>>> >>>>>>>> [ 0.004000] Inode-cache hash table entries: 32768 (order: 5,
>>>> >>>>>>>> 131072
>>>> >>>>>>>> bytes)
>>>> >>>>>>>> [ 0.004000] Memory: 440132k/458176k available (2572k kernel
>>>> >>>>>>>> code,
>>>> >>>>>>>> 17396k reserved, 1160k data, 424k init, 0k highmem)
>>>> >>>>>>>> [ 0.004000] virtual kernel memory layout:
>>>> >>>>>>>> [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616
>>>> >>>>>>>> kB)
>>>> >>>>>>>> [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096
>>>> >>>>>>>> kB)
>>>> >>>>>>>> [ 0.004000] vmalloc : 0xdc800000 - 0xff3fe000 ( 555
>>>> >>>>>>>> MB)
>>>> >>>>>>>> [ 0.004000] lowmem : 0xc0000000 - 0xdbf70000 ( 447
>>>> >>>>>>>> MB)
>>>> >>>>>>>> [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424
>>>> >>>>>>>> kB)
>>>> >>>>>>>> [ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160
>>>> >>>>>>>> kB)
>>>> >>>>>>>> [ 0.004000] .text : 0xc0100000 - 0xc038329a (2572
>>>> >>>>>>>> kB)
>>>> >>>>>>>> [ 0.004000] Checking if this processor honours the WP bit
>>>> >>>>>>>> even in
>>>> >>>>>>>> supervisor mode...Ok.
>>>> >>>>>>>> [ 0.004000] CPA: page pool initialized 1 of 1 pages
>>>> >>>>>>>> preallocated
>>>> >>>>>>>> [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3,
>>>> >>>>>>>> MinObjects=0, CPUs=1, Nodes=1
>>>> >>>>>>>> [ 0.004014] Calibrating delay loop (skipped), value
>>>> >>>>>>>> calculated
>>>> >>>>>>>> using timer frequency.. 5316.25 BogoMIPS (lpj=10632504)
>>>> >>>>>>>> [ 0.004040] Security Framework initialized
>>>> >>>>>>>> [ 0.004051] SELinux: Disabled at boot.
>>>> >>>>>>>> [ 0.004076] AppArmor: AppArmor initialized
>>>> >>>>>>>> [ 0.004091] Mount-cache hash table entries: 512
>>>> >>>>>>>> [ 0.004326] Initializing cgroup subsys ns
>>>> >>>>>>>> [ 0.004333] Initializing cgroup subsys cpuacct
>>>> >>>>>>>> [ 0.004336] Initializing cgroup subsys memory
>>>> >>>>>>>> [ 0.004359] CPU: Trace cache: 12K uops, L1 D cache: 8K
>>>> >>>>>>>> [ 0.004363] CPU: L2 cache: 512K
>>>> >>>>>>>> [ 0.004367] CPU: Hyper-Threading is disabled
>>>> >>>>>>>> [ 0.004389] Checking 'hlt' instruction... OK.
>>>> >>>>>>>> [ 0.020657] SMP alternatives: switching to UP code
>>>> >>>>>>>> [ 0.028041] Freeing SMP alternatives: 11k freed
>>>> >>>>>>>> [ 0.028049] ACPI: Core revision 20080609
>>>> >>>>>>>> [ 0.033930] ACPI: Checking initramfs for custom DSDT
>>>> >>>>>>>> [ 0.394845] ACPI: setting ELCR to 0200 (from 0c00)
>>>> >>>>>>>> [ 0.396099] weird, boot CPU (#0) not listedby the BIOS.
>>>> >>>>>>>> [ 0.396102] SMP motherboard not detected.
>>>> >>>>>>>> [ 0.396106] Local APIC not detected. Using dummy APIC
>>>> >>>>>>>> emulation.
>>>> >>>>>>>> [ 0.396109] SMP disabled
>>>> >>>>>>>> [ 0.396203] Brought up 1 CPUs
>>>> >>>>>>>> [ 0.396207] Total of 1 processors activated (5316.25
>>>> >>>>>>>> BogoMIPS).
>>>> >>>>>>>> [ 0.396224] CPU0 attaching sched-domain:
>>>> >>>>>>>> [ 0.396229] domain 0: span 0 level CPU
>>>> >>>>>>>> [ 0.396232] groups: 0
>>>> >>>>>>>> [ 0.396602] net_namespace: 840 bytes
>>>> >>>>>>>> [ 0.396616] Booting paravirtualized kernel on bare hardware
>>>> >>>>>>>> [ 0.396887] Time: 3:36:10 Date: 12/04/08
>>>> >>>>>>>> [ 0.396941] NET: Registered protocol family 16
>>>> >>>>>>>> [ 0.397443] EISA bus registered
>>>> >>>>>>>> [ 0.397481] ACPI: bus type pci registered
>>>> >>>>>>>> [ 0.397753] PCI: PCI BIOS revision 2.10 entry at 0xfd8a0,
>>>> >>>>>>>> last bus=1
>>>> >>>>>>>> [ 0.397757] PCI: Using configuration type 1 for base access
>>>> >>>>>>>> [ 0.401665] ACPI: EC: Look up EC in DSDT
>>>> >>>>>>>> [ 0.405888] ACPI: Interpreter enabled
>>>> >>>>>>>> [ 0.405894] ACPI: (supports S0 S3 S4 S5)
>>>> >>>>>>>> [ 0.405916] ACPI: Using PIC for interrupt routing
>>>> >>>>>>>> [ 0.420826] ACPI: EC: GPE = 0x18, I/O: command/status =
>>>> >>>>>>>> 0x66, data =
>>>> >>>>>>>> 0x62
>>>> >>>>>>>> [ 0.420831] ACPI: EC: driver started in poll mode
>>>> >>>>>>>> [ 0.420924] ACPI: PCI Root Bridge [PCI0] (0000:00)
>>>> >>>>>>>> [ 0.421036] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000,
>>>> >>>>>>>> efffffff]
>>>> >>>>>>>> [ 0.421042] PCI: 0000:00:00.0 reg 14 32bit mmio: [e0800000,
>>>> >>>>>>>> e0800fff]
>>>> >>>>>>>> [ 0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000,
>>>> >>>>>>>> e0400fff]
>>>> >>>>>>>> [ 0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff]
>>>> >>>>>>>> [ 0.421142] pci 0000:00:03.0: PME# supported from D3hot
>>>> >>>>>>>> D3cold
>>>> >>>>>>>> [ 0.421147] pci 0000:00:03.0: PME# disabled
>>>> >>>>>>>> [ 0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff]
>>>> >>>>>>>> [ 0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000,
>>>> >>>>>>>> e0401fff]
>>>> >>>>>>>> [ 0.421204] pci 0000:00:04.0: supports D1
>>>> >>>>>>>> [ 0.421206] pci 0000:00:04.0: supports D2
>>>> >>>>>>>> [ 0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot
>>>> >>>>>>>> D3cold
>>>> >>>>>>>> [ 0.421212] pci 0000:00:04.0: PME# disabled
>>>> >>>>>>>> [ 0.421257] pci 0000:00:06.0: quirk: region 8000-803f
>>>> >>>>>>>> claimed by
>>>> >>>>>>>> ali7101 ACPI
>>>> >>>>>>>> [ 0.421261] pci 0000:00:06.0: quirk: region 8040-805f
>>>> >>>>>>>> claimed by
>>>> >>>>>>>> ali7101 SMB
>>>> >>>>>>>> [ 0.421340] PCI: 0000:00:0a.0 reg 10 32bit mmio: [e0402000,
>>>> >>>>>>>> e0402fff]
>>>> >>>>>>>> [ 0.421352] pci 0000:00:0a.0: supports D1
>>>> >>>>>>>> [ 0.421354] pci 0000:00:0a.0: supports D2
>>>> >>>>>>>> [ 0.421356] pci 0000:00:0a.0: PME# supported from D0 D1 D2
>>>> >>>>>>>> D3hot D3cold
>>>> >>>>>>>> [ 0.421360] pci 0000:00:0a.0: PME# disabled
>>>> >>>>>>>> [ 0.421385] PCI: 0000:00:0a.1 reg 10 32bit mmio: [e0403000,
>>>> >>>>>>>> e0403fff]
>>>> >>>>>>>> [ 0.421397] pci 0000:00:0a.1: supports D1
>>>> >>>>>>>> [ 0.421399] pci 0000:00:0a.1: supports D2
>>>> >>>>>>>> [ 0.421401] pci 0000:00:0a.1: PME# supported from D0 D1 D2
>>>> >>>>>>>> D3hot D3cold
>>>> >>>>>>>> [ 0.421405] pci 0000:00:0a.1: PME# disabled
>>>> >>>>>>>> [ 0.421427] PCI: 0000:00:0a.2 reg 10 32bit mmio: [e0404000,
>>>> >>>>>>>> e04047ff]
>>>> >>>>>>>> [ 0.421459] pci 0000:00:0a.2: PME# supported from D0 D3hot
>>>> >>>>>>>> D3cold
>>>> >>>>>>>> [ 0.421464] pci 0000:00:0a.2: PME# disabled
>>>> >>>>>>>> [ 0.421505] PCI: 0000:00:0c.0 reg 20 io port: [8080, 809f]
>>>> >>>>>>>> [ 0.421523] pci 0000:00:0c.0: PME# supported from D0 D3hot
>>>> >>>>>>>> D3cold
>>>> >>>>>>>> [ 0.421527] pci 0000:00:0c.0: PME# disabled
>>>> >>>>>>>> [ 0.421561] PCI: 0000:00:0c.1 reg 20 io port: [80a0, 80bf]
>>>> >>>>>>>> [ 0.421581] pci 0000:00:0c.1: PME# supported from D0 D3hot
>>>> >>>>>>>> D3cold
>>>> >>>>>>>> [ 0.421585] pci 0000:00:0c.1: PME# disabled
>>>> >>>>>>>> [ 0.421607] PCI: 0000:00:0c.2 reg 10 32bit mmio: [e0404800,
>>>> >>>>>>>> e04048ff]
>>>> >>>>>>>> [ 0.421639] pci 0000:00:0c.2: PME# supported from D0 D3hot
>>>> >>>>>>>> D3cold
>>>> >>>>>>>> [ 0.421643] pci 0000:00:0c.2: PME# disabled
>>>> >>>>>>>> [ 0.421682] PCI: 0000:00:0f.0 reg 20 io port: [80c0, 80cf]
>>>> >>>>>>>> [ 0.421724] PCI: 0000:00:12.0 reg 10 io port: [9c00, 9cff]
>>>> >>>>>>>> [ 0.421731] PCI: 0000:00:12.0 reg 14 32bit mmio: [e0404c00,
>>>> >>>>>>>> e0404dff]
>>>> >>>>>>>> [ 0.421760] pci 0000:00:12.0: supports D1
>>>> >>>>>>>> [ 0.421761] pci 0000:00:12.0: supports D2
>>>> >>>>>>>> [ 0.421764] pci 0000:00:12.0: PME# supported from D1 D2
>>>> >>>>>>>> D3hot D3cold
>>>> >>>>>>>> [ 0.421768] pci 0000:00:12.0: PME# disabled
>>>> >>>>>>>> [ 0.421815] PCI: 0000:01:05.0 reg 10 32bit mmio: [f0000000,
>>>> >>>>>>>> f7ffffff]
>>>> >>>>>>>> [ 0.421821] PCI: 0000:01:05.0 reg 14 io port: [a000, a0ff]
>>>> >>>>>>>> [ 0.421827] PCI: 0000:01:05.0 reg 18 32bit mmio: [e0500000,
>>>> >>>>>>>> e050ffff]
>>>> >>>>>>>> [ 0.421843] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
>>>> >>>>>>>> [ 0.421857] pci 0000:01:05.0: supports D1
>>>> >>>>>>>> [ 0.421858] pci 0000:01:05.0: supports D2
>>>> >>>>>>>> [ 0.421885] PCI: bridge 0000:00:01.0 io port: [a000, afff]
>>>> >>>>>>>> [ 0.421889] PCI: bridge 0000:00:01.0 32bit mmio: [e0500000,
>>>> >>>>>>>> e05fffff]
>>>> >>>>>>>> [ 0.421894] PCI: bridge 0000:00:01.0 32bit mmio pref:
>>>> >>>>>>>> [f0000000,
>>>> >>>>>>>> f7ffffff]
>>>> >>>>>>>> [ 0.421923] bus 00 -> node 0
>>>> >>>>>>>> [ 0.421933] ACPI: PCI Interrupt Routing Table
>>>> >>>>>>>> [\_SB_.PCI0._PRT]
>>>> >>>>>>>> [ 0.422053] ACPI: PCI Interrupt Routing Table
>>>> >>>>>>>> [\_SB_.PCI0.PPB_._PRT]
>>>> >>>>>>>> [ 0.425764] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10
>>>> >>>>>>>> 11)
>>>> >>>>>>>> *0, disabled.
>>>> >>>>>>>> [ 0.425986] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10
>>>> >>>>>>>> *11)
>>>> >>>>>>>> [ 0.426202] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10
>>>> >>>>>>>> *11)
>>>> >>>>>>>> [ 0.426422] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10
>>>> >>>>>>>> 11)
>>>> >>>>>>>> *0, disabled.
>>>> >>>>>>>> [ 0.426639] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7
>>>> >>>>>>>> *10 11)
>>>> >>>>>>>> [ 0.426858] ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11
>>>> >>>>>>>> [ 0.427073] ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10
>>>> >>>>>>>> *11)
>>>> >>>>>>>> [ 0.427291] ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10
>>>> >>>>>>>> *11)
>>>> >>>>>>>> [ 0.427508] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10
>>>> >>>>>>>> 11)
>>>> >>>>>>>> *0, disabled.
>>>> >>>>>>>> [ 0.427785] Linux Plug and Play Support v0.97 (c) Adam Belay
>>>> >>>>>>>> [ 0.427844] pnp: PnP ACPI init
>>>> >>>>>>>> [ 0.427859] ACPI: bus type pnp registered
>>>> >>>>>>>> [ 0.436388] pnp: PnP ACPI: found 12 devices
>>>> >>>>>>>> [ 0.436392] ACPI: ACPI bus type pnp unregistered
>>>> >>>>>>>> [ 0.436399] PnPBIOS: Disabled by ACPI PNP
>>>> >>>>>>>> [ 0.440333] PCI: Using ACPI for IRQ routing
>>>> >>>>>>>> [ 0.440499] NET: Registered protocol family 8
>>>> >>>>>>>> [ 0.440499] NET: Registered protocol family 20
>>>> >>>>>>>> [ 0.440499] NetLabel: Initializing
>>>> >>>>>>>> [ 0.440499] NetLabel: domain hash size = 128
>>>> >>>>>>>> [ 0.440499] NetLabel: protocols = UNLABELED CIPSOv4
>>>> >>>>>>>> [ 0.440499] NetLabel: unlabeled traffic allowed by default
>>>> >>>>>>>> [ 0.440499] tracer: 772 pages allocated for 65536 entries of
>>>> >>>>>>>> 48 bytes
>>>> >>>>>>>> [ 0.440499] actual entries 65620
>>>> >>>>>>>> [ 0.440770] AppArmor: AppArmor Filesystem Enabled
>>>> >>>>>>>> [ 0.440791] ACPI: RTC can wake from S4
>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x40b-0x40b has been
>>>> >>>>>>>> reserved
>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x480-0x48f has been
>>>> >>>>>>>> reserved
>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x4d0-0x4d1 has been
>>>> >>>>>>>> reserved
>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x4d6-0x4d6 has been
>>>> >>>>>>>> reserved
>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0x8000-0x807f could
>>>> >>>>>>>> not be
>>>> >>>>>>>> reserved
>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0xfe00-0xfe01 has
>>>> >>>>>>>> been reserved
>>>> >>>>>>>> [ 0.440811] system 00:05: ioport range 0xfe10-0xfe11 has
>>>> >>>>>>>> been reserved
>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0x0-0x9ffff could not
>>>> >>>>>>>> be reserved
>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0xdc000-0xdffff could
>>>> >>>>>>>> not be
>>>> >>>>>>>> reserved
>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0xe0000-0xfffff could
>>>> >>>>>>>> not be
>>>> >>>>>>>> reserved
>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0x100000-0x1bffffff
>>>> >>>>>>>> could not
>>>> >>>>>>>> be reserved
>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0xfff80000-0xffffffff
>>>> >>>>>>>> could
>>>> >>>>>>>> not be reserved
>>>> >>>>>>>> [ 0.440811] system 00:06: iomem range 0xe0800000-0xe0800fff
>>>> >>>>>>>> has been
>>>> >>>>>>>> reserved
>>>> >>>>>>>> [ 0.476831] pci 0000:00:01.0: PCI bridge, secondary bus
>>>> >>>>>>>> 0000:01
>>>> >>>>>>>> [ 0.476836] pci 0000:00:01.0: IO window: 0xa000-0xafff
>>>> >>>>>>>> [ 0.476841] pci 0000:00:01.0: MEM window:
>>>> >>>>>>>> 0xe0500000-0xe05fffff
>>>> >>>>>>>> [ 0.476845] pci 0000:00:01.0: PREFETCH window:
>>>> >>>>>>>> 0x000000f0000000-0x000000f7ffffff
>>>> >>>>>>>> [ 0.476852] pci 0000:00:0a.0: CardBus bridge, secondary bus
>>>> >>>>>>>> 0000:02
>>>> >>>>>>>> [ 0.476854] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
>>>> >>>>>>>> [ 0.476858] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
>>>> >>>>>>>> [ 0.476863] pci 0000:00:0a.0: PREFETCH window:
>>>> >>>>>>>> 0x30000000-0x33ffffff
>>>> >>>>>>>> [ 0.476867] pci 0000:00:0a.0: MEM window:
>>>> >>>>>>>> 0x34000000-0x37ffffff
>>>> >>>>>>>> [ 0.476871] pci 0000:00:0a.1: CardBus bridge, secondary bus
>>>> >>>>>>>> 0000:06
>>>> >>>>>>>> [ 0.476874] pci 0000:00:0a.1: IO window: 0x001800-0x0018ff
>>>> >>>>>>>> [ 0.476878] pci 0000:00:0a.1: IO window: 0x001c00-0x001cff
>>>> >>>>>>>> [ 0.476882] pci 0000:00:0a.1: PREFETCH window:
>>>> >>>>>>>> 0x38000000-0x3bffffff
>>>> >>>>>>>> [ 0.476887] pci 0000:00:0a.1: MEM window:
>>>> >>>>>>>> 0x3c000000-0x3fffffff
>>>> >>>>>>>> [ 0.477258] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ
>>>> >>>>>>>> 11
>>>> >>>>>>>> [ 0.477263] PCI: setting IRQ 11 as level-triggered
>>>> >>>>>>>> [ 0.477268] pci 0000:00:0a.0: PCI INT A -> Link[LNK2] -> GSI
>>>> >>>>>>>> 11
>>>> >>>>>>>> (level, low) -> IRQ 11
>>>> >>>>>>>> [ 0.477540] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ
>>>> >>>>>>>> 10
>>>> >>>>>>>> [ 0.477543] PCI: setting IRQ 10 as level-triggered
>>>> >>>>>>>> [ 0.477548] pci 0000:00:0a.1: PCI INT B -> Link[LNK4] -> GSI
>>>> >>>>>>>> 10
>>>> >>>>>>>> (level, low) -> IRQ 10
>>>> >>>>>>>> [ 0.477554] bus: 00 index 0 io port: [0, ffff]
>>>> >>>>>>>> [ 0.477556] bus: 00 index 1 mmio: [0, ffffffff]
>>>> >>>>>>>> [ 0.477559] bus: 01 index 0 io port: [a000, afff]
>>>> >>>>>>>> [ 0.477562] bus: 01 index 1 mmio: [e0500000, e05fffff]
>>>> >>>>>>>> [ 0.477564] bus: 01 index 2 mmio: [f0000000, f7ffffff]
>>>> >>>>>>>> [ 0.477567] bus: 01 index 3 mmio: [0, 0]
>>>> >>>>>>>> [ 0.477569] bus: 02 index 0 io port: [1000, 10ff]
>>>> >>>>>>>> [ 0.477572] bus: 02 index 1 io port: [1400, 14ff]
>>>> >>>>>>>> [ 0.477574] bus: 02 index 2 mmio: [30000000, 33ffffff]
>>>> >>>>>>>> [ 0.477577] bus: 02 index 3 mmio: [34000000, 37ffffff]
>>>> >>>>>>>> [ 0.477579] bus: 06 index 0 io port: [1800, 18ff]
>>>> >>>>>>>> [ 0.477582] bus: 06 index 1 io port: [1c00, 1cff]
>>>> >>>>>>>> [ 0.477584] bus: 06 index 2 mmio: [38000000, 3bffffff]
>>>> >>>>>>>> [ 0.477587] bus: 06 index 3 mmio: [3c000000, 3fffffff]
>>>> >>>>>>>> [ 0.477610] NET: Registered protocol family 2
>>>> >>>>>>>> [ 0.477849] IP route cache hash table entries: 4096 (order:
>>>> >>>>>>>> 2, 16384
>>>> >>>>>>>> bytes)
>>>> >>>>>>>> [ 0.478188] TCP established hash table entries: 16384
>>>> >>>>>>>> (order: 5,
>>>> >>>>>>>> 131072 bytes)
>>>> >>>>>>>> [ 0.478315] TCP bind hash table entries: 16384 (order: 5,
>>>> >>>>>>>> 131072 bytes)
>>>> >>>>>>>> [ 0.478430] TCP: Hash tables configured (established 16384
>>>> >>>>>>>> bind 16384)
>>>> >>>>>>>> [ 0.478434] TCP reno registered
>>>> >>>>>>>> [ 0.478576] NET: Registered protocol family 1
>>>> >>>>>>>> [ 0.478749] checking if image is initramfs... it is
>>>> >>>>>>>> [ 0.980128] Switched to high resolution mode on CPU 0
>>>> >>>>>>>> [ 1.236336] Freeing initrd memory: 7988k freed
>>>> >>>>>>>> [ 1.236740] Simple Boot Flag at 0x35 set to 0x1
>>>> >>>>>>>> [ 1.237409] audit: initializing netlink socket (disabled)
>>>> >>>>>>>> [ 1.237447] type=2000 audit(1228361770.236:1): initialized
>>>> >>>>>>>> [ 1.242678] HugeTLB registered 4 MB page size, pre-allocated
>>>> >>>>>>>> 0 pages
>>>> >>>>>>>> [ 1.245896] VFS: Disk quotas dquot_6.5.1
>>>> >>>>>>>> [ 1.246053] Dquot-cache hash table entries: 1024 (order 0,
>>>> >>>>>>>> 4096 bytes)
>>>> >>>>>>>> [ 1.246214] msgmni has been set to 875
>>>> >>>>>>>> [ 1.246406] io scheduler noop registered
>>>> >>>>>>>> [ 1.246410] io scheduler anticipatory registered
>>>> >>>>>>>> [ 1.246413] io scheduler deadline registered
>>>> >>>>>>>> [ 1.246435] io scheduler cfq registered (default)
>>>> >>>>>>>> [ 1.246492] pci 0000:00:07.0: Activating ISA DMA hang
>>>> >>>>>>>> workarounds
>>>> >>>>>>>> [ 1.246559] pci 0000:01:05.0: Boot video device
>>>> >>>>>>>> [ 1.247102] isapnp: Scanning for PnP cards...
>>>> >>>>>>>> [ 1.601376] isapnp: No Plug & Play device found
>>>> >>>>>>>> [ 1.670035] Serial: 8250/16550 driver4 ports, IRQ sharing
>>>> >>>>>>>> enabled
>>>> >>>>>>>> [ 1.670179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a
>>>> >>>>>>>> 16550
>>>> >>>>>>>> [ 1.671493] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ
>>>> >>>>>>>> 11
>>>> >>>>>>>> [ 1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] ->
>>>> >>>>>>>> GSI 11
>>>> >>>>>>>> (level, low) -> IRQ 11
>>>> >>>>>>>> [ 1.671508] serial 0000:00:03.0: PCI INT A disabled
>>>> >>>>>>>> [ 1.674033] brd: module loaded
>>>> >>>>>>>> [ 1.674149] input: Macintosh mouse button emulation as
>>>> >>>>>>>> /devices/virtual/input/input0
>>>> >>>>>>>> [ 1.674355] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
>>>> >>>>>>>> at
>>>> >>>>>>>> 0x60,0x64 irq 1,12
>>>> >>>>>>>> [ 1.678060] serio: i8042 KBD port at 0x60,0x64 irq 1
>>>> >>>>>>>> [ 1.678070] serio: i8042 AUX port at 0x60,0x64 irq 12
>>>> >>>>>>>> [ 1.678734] mice: PS/2 mouse device common for all mice
>>>> >>>>>>>> [ 1.678989] rtc_cmos 00:02: rtc core: registered rtc_cmos as
>>>> >>>>>>>> rtc0
>>>> >>>>>>>> [ 1.679020] rtc0: alarms up to one month, y3k
>>>> >>>>>>>> [ 1.679231] EISA: Probing bus 0 at eisa.0
>>>> >>>>>>>> [ 1.679243] Cannot allocate resource for EISA slot 1
>>>> >>>>>>>> [ 1.679271] Cannot allocate resource for EISA slot 8
>>>> >>>>>>>> [ 1.679274] EISA: Detected 0 cards.
>>>> >>>>>>>> [ 1.679279] cpuidle: using governor ladder
>>>> >>>>>>>> [ 1.679282] cpuidle: using governor menu
>>>> >>>>>>>> [ 1.679972] TCP cubic registered
>>>> >>>>>>>> [ 1.680063] Using IPI No-Shortcut mode
>>>> >>>>>>>> [ 1.680487] registered taskstats version 1
>>>> >>>>>>>> [ 1.680625] Magic number: 4:233:613
>>>> >>>>>>>> [ 1.680643] isa: hash matches
>>>> >>>>>>>> [ 1.680721] tty ptye3: hash matches
>>>> >>>>>>>> [ 1.680820] pci 0000:00:0a.0: hash matches
>>>> >>>>>>>> [ 1.680896] rtc_cmos 00:02: setting system clock to
>>>> >>>>>>>> 2008-12-04
>>>> >>>>>>>> 03:36:11 UTC (1228361771)
>>>> >>>>>>>> [ 1.680901] BIOS EDD facility v0.16 2004-Jun-25, 0 devices
>>>> >>>>>>>> found
>>>> >>>>>>>> [ 1.680903] EDD information not available.
>>>> >>>>>>>> [ 1.681786] Freeing unused kernel memory: 424k freed
>>>> >>>>>>>> [ 1.681848] Write protecting the kernel text: 2576k
>>>> >>>>>>>> [ 1.681884] Write protecting the kernel read-only data: 936k
>>>> >>>>>>>> [ 1.712227] input: AT Translated Set 2 keyboard as
>>>> >>>>>>>> /devices/platform/i8042/serio0/input/input1
>>>> >>>>>>>> [ 1.916830] fuse init (API version 7.9)
>>>> >>>>>>>> [ 2.153320] ACPI: CPU0 (power states: C1[C1] C2[C2])
>>>> >>>>>>>> [ 2.158379] processor ACPI0007:00: registered as
>>>> >>>>>>>> cooling_device0
>>>> >>>>>>>> [ 2.158385] ACPI: Processor [CPU0] (supports 8 throttling
>>>> >>>>>>>> states)
>>>> >>>>>>>> [ 2.186683] thermal LNXTHERM:01: registered as thermal_zone0
>>>> >>>>>>>> [ 2.195703] ACPI: Thermal Zone [TZ01] (39 C)
>>>> >>>>>>>> [ 3.435666] usbcore: registered new interface driver usbfs
>>>> >>>>>>>> [ 3.435708] usbcore: registered new interface driver hub
>>>> >>>>>>>> [ 3.449846] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ
>>>> >>>>>>>> 10
>>>> >>>>>>>> [ 3.449854] ohci1394 0000:00:0a.2: PCI INT C -> Link[LNK5]
>>>> >>>>>>>> -> GSI
>>>> >>>>>>>> 10 (level, low) -> IRQ 10
>>>> >>>>>>>> [ 3.502708] ohci1394: fw-host0: OHCI-1394 1.0 (PCI):
>>>> >>>>>>>> IRQ=[10]
>>>> >>>>>>>> MMIO=[e0404000-e04047ff] Max Packet=[2048] IR/IT
>>>> >>>>>>>> contexts=[4/4]
>>>> >>>>>>>> [ 3.522828] usbcore: registered new device driver usb
>>>> >>>>>>>> [ 3.529450] No dock devices found.
>>>> >>>>>>>> [ 3.558303] SCSI subsystem initialized
>>>> >>>>>>>> [ 3.573485] USB Universal Host Controller Interface driver
>>>> >>>>>>>> v3.0
>>>> >>>>>>>> [ 3.577306] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22,
>>>> >>>>>>>> 2004)
>>>> >>>>>>>> [ 3.641823] libata version 3.00 loaded.
>>>> >>>>>>>> [ 3.685077] uhci_hcd 0000:00:0c.0: PCI INT A -> Link[LNK2]
>>>> >>>>>>>> -> GSI
>>>> >>>>>>>> 11 (level, low) -> IRQ 11
>>>> >>>>>>>> [ 3.685094] uhci_hcd 0000:00:0c.0: UHCI Host Controller
>>>> >>>>>>>> [ 3.685194] uhci_hcd 0000:00:0c.0: new USB bus registered,
>>>> >>>>>>>> assigned
>>>> >>>>>>>> bus number 1
>>>> >>>>>>>> [ 3.685226] uhci_hcd 0000:00:0c.0: irq 11, io base
>>>> >>>>>>>> 0x00008080
>>>> >>>>>>>> [ 3.685520] usb usb1: configuration #1 chosen from 1 choice
>>>> >>>>>>>> [ 3.685559] hub 1-0:1.0: USB hub found
>>>> >>>>>>>> [ 3.685577] hub 1-0:1.0: 2 ports detected
>>>> >>>>>>>> [ 3.892711] uhci_hcd 0000:00:0c.1: PCI INT B -> Link[LNK4]
>>>> >>>>>>>> -> GSI
>>>> >>>>>>>> 10 (level, low) -> IRQ 10
>>>> >>>>>>>> [ 3.892729] uhci_hcd 0000:00:0c.1: UHCI Host Controller
>>>> >>>>>>>> [ 3.892769] uhci_hcd 0000:00:0c.1: new USB bus registered,
>>>> >>>>>>>> assigned
>>>> >>>>>>>> bus number 2
>>>> >>>>>>>> [ 3.892800] uhci_hcd 0000:00:0c.1: irq 10, io base
>>>> >>>>>>>> 0x000080a0
>>>> >>>>>>>> [ 3.892977] usb usb2: configuration #1 chosen from 1 choice
>>>> >>>>>>>> [ 3.893015] hub 2-0:1.0: USB hub found
>>>> >>>>>>>> [ 3.893030] hub 2-0:1.0: 2 ports detected
>>>> >>>>>>>> [ 4.100720] ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNK5]
>>>> >>>>>>>> -> GSI
>>>> >>>>>>>> 10 (level, low) -> IRQ 10
>>>> >>>>>>>> [ 4.100748] ehci_hcd 0000:00:0c.2: EHCI Host Controller
>>>> >>>>>>>> [ 4.100790] ehci_hcd 0000:00:0c.2: new USB bus registered,
>>>> >>>>>>>> assigned
>>>> >>>>>>>> bus number 3
>>>> >>>>>>>> [ 4.100848] ehci_hcd 0000:00:0c.2: irq 10, io mem 0xe0404800
>>>> >>>>>>>> [ 4.112096] ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI
>>>> >>>>>>>> 0.95,
>>>> >>>>>>>> driver 10 Dec 2004
>>>> >>>>>>>> [ 4.112430] usb usb3: configuration #1 chosen from 1 choice
>>>> >>>>>>>> [ 4.112470] hub 3-0:1.0: USB hub found
>>>> >>>>>>>> [ 4.112485] hub 3-0:1.0: 4 ports detected
>>>> >>>>>>>> [ 4.321310] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10)
>>>> >>>>>>>> is not
>>>> >>>>>>>> an 8139C+ compatible chip
>>>> >>>>>>>> [ 4.321317] 8139cp 0000:00:12.0: Try the "8139too" driver
>>>> >>>>>>>> instead.
>>>> >>>>>>>> [ 4.327282] 8139too Fast Ethernet driver 0.9.28
>>>> >>>>>>>> [ 4.327690] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ
>>>> >>>>>>>> 11
>>>> >>>>>>>> [ 4.327696] 8139too 0000:00:12.0: PCI INT A -> Link[LNK1] ->
>>>> >>>>>>>> GSI 11
>>>> >>>>>>>> (level, low) -> IRQ 11
>>>> >>>>>>>> [ 4.328388] eth0: RealTek RTL8139 at 0x9c00,
>>>> >>>>>>>> 08:00:46:c1:2f:38, IRQ 11
>>>> >>>>>>>> [ 4.328391] eth0: Identified 8139 chip type
>>>> >>>>>>>> 'RTL-8100B/8139D'
>>>> >>>>>>>> [ 4.333699] pata_ali 0000:00:0f.0: can't derive routing for
>>>> >>>>>>>> PCI INT A
>>>> >>>>>>>> [ 4.334315] scsi0 : pata_ali
>>>> >>>>>>>> [ 4.334514] scsi1 : pata_ali
>>>> >>>>>>>> [ 4.335705] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6
>>>> >>>>>>>> bmdma 0x80c0
>>>> >>>>>>>> irq 14
>>>> >>>>>>>> [ 4.335709] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376
>>>> >>>>>>>> bmdma 0x80c8
>>>> >>>>>>>> irq 15
>>>> >>>>>>>> [ 4.436137] usb 3-3: new high speed USB device using
>>>> >>>>>>>> ehci_hcd and
>>>> >>>>>>>> address 2
>>>> >>>>>>>> [ 4.496480] ata1.00: ATA-5: HITACHI_DK23FA-60, 00M4A0A1, max
>>>> >>>>>>>> UDMA/100
>>>> >>>>>>>> [ 4.496486] ata1.00: 117210240 sectors, multi 16: LBA
>>>> >>>>>>>> [ 4.504392] ata1.00: configured for UDMA/100
>>>> >>>>>>>> [ 4.570936] usb 3-3: configuration #1 chosen from 1 choice
>>>> >>>>>>>> [ 4.668513] ata2.00: ATAPI: SONY DVD RW DW-U50A, 1.5d,
>>>> >>>>>>>> max UDMA/33
>>>> >>>>>>>> [ 4.668530] ata2.00: WARNING: ATAPI DMA disabled for
>>>> >>>>>>>> reliablity
>>>> >>>>>>>> issues. It can be enabled
>>>> >>>>>>>> [ 4.668534] ata2.00: WARNING: via pata_ali.atapi_dma
>>>> >>>>>>>> modparam or
>>>> >>>>>>>> corresponding sysfs node.
>>>> >>>>>>>> [ 4.684549] ata2.00: configured for UDMA/33
>>>> >>>>>>>> [ 4.684800] scsi 0:0:0:0: Direct-Access ATA
>>>> >>>>>>>> HITACHI_DK23FA-6 00M4 PQ: 0 ANSI: 5
>>>> >>>>>>>> [ 4.689907] scsi 1:0:0:0: CD-ROM SONY DVD RW
>>>> >>>>>>>> DW-U50A
>>>> >>>>>>>> 1.5d PQ: 0 ANSI: 5
>>>> >>>>>>>> [ 4.875853] scsi 0:0:0:0: Attached scsi generic sg0 type 0
>>>> >>>>>>>> [ 4.875909] scsi 1:0:0:0: Attached scsi generic sg1 type 5
>>>> >>>>>>>> [ 4.905017] usbcore: registered new interface driver
>>>> >>>>>>>> libusual
>>>> >>>>>>>> [ 4.915604] Initializing USB Mass Storage driver...
>>>> >>>>>>>> [ 4.926183] scsi2 : SCSI emulation for USB Mass Storage
>>>> >>>>>>>> devices
>>>> >>>>>>>> [ 4.930846] Driver 'sd' needs updating - please use bus_type
>>>> >>>>>>>> methods
>>>> >>>>>>>> [ 4.931041] sd 0:0:0:0: [sda] 117210240 512-byte hardware
>>>> >>>>>>>> sectors
>>>> >>>>>>>> (60012 MB)
>>>> >>>>>>>> [ 4.931071] sd 0:0:0:0: [sda] Write Protect is off
>>>> >>>>>>>> [ 4.931074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>>> >>>>>>>> [ 4.931121] sd 0:0:0:0: [sda] Write cache: enabled, read
>>>> >>>>>>>> cache:
>>>> >>>>>>>> enabled, doesn't support DPO or FUA
>>>> >>>>>>>> [ 4.931230] sd 0:0:0:0: [sda] 117210240 512-byte hardware
>>>> >>>>>>>> sectors
>>>> >>>>>>>> (60012 MB)
>>>> >>>>>>>> [ 4.931256] sd 0:0:0:0: [sda] Write Protect is off
>>>> >>>>>>>> [ 4.931260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>>> >>>>>>>> [ 4.931305] sd 0:0:0:0: [sda] Write cache: enabled, read
>>>> >>>>>>>> cache:
>>>> >>>>>>>> enabled, doesn't support DPO or FUA
>>>> >>>>>>>> [ 4.931312] sda:<6>usbcore: registered new interface driver
>>>> >>>>>>>> usb-storage
>>>> >>>>>>>> [ 4.933380] USB Mass Storage support registered.
>>>> >>>>>>>> [ 4.933587] usb-storage: device found at 2
>>>> >>>>>>>> [ 4.933590] usb-storage: waiting for device to settle before
>>>> >>>>>>>> scanning
>>>> >>>>>>>> [ 4.954192] Driver 'sr' needs updating - please use bus_type
>>>> >>>>>>>> methods
>>>> >>>>>>>> [ 4.956254] ieee1394: Host added: ID:BUS[0-00:1023]
>>>> >>>>>>>> GUID[080046030188cd58]
>>>> >>>>>>>> [ 4.976443] Marking TSC unstable due to TSC halts in idle
>>>> >>>>>>>> [ 4.981461] sda1 sda2 < sda5 sda6 sda7 sda8 >
>>>> >>>>>>>> [ 5.060309] sd 0:0:0:0: [sda] Attached SCSI disk
>>>> >>>>>>>> [ 5.078879] sr0: scsi3-mmc drive: 24x/24x writer cd/rw
>>>> >>>>>>>> xa/form2 cdda
>>>> >>>>>>>> tray
>>>> >>>>>>>> [ 5.078888] Uniform CD-ROM driver Revision: 3.20
>>>> >>>>>>>> [ 5.079060] sr 1:0:0:0: Attached scsi CD-ROM sr0
>>>> >>>>>>>> [ 5.525816] PM: Starting manual resume from disk
>>>> >>>>>>>> [ 5.525824] PM: Resume from partition 8:6
>>>> >>>>>>>> [ 5.525826] PM: Checking hibernation image.
>>>> >>>>>>>> [ 5.526062] PM: Resume from disk failed.
>>>> >>>>>>>> [ 5.604150] kjournald starting. Commit interval 5 seconds
>>>> >>>>>>>> [ 5.604179] EXT3-fs: mounted filesystem with ordered data
>>>> >>>>>>>> mode.
>>>> >>>>>>>> [ 9.932309] usb-storage: device scan complete
>>>> >>>>>>>> [ 9.933393] scsi 2:0:0:0: Direct-Access USB2.0 Mobile
>>>> >>>>>>>> Disk
>>>> >>>>>>>> 1.00 PQ: 0 ANSI: 2
>>>> >>>>>>>> [ 9.934990] sd 2:0:0:0: [sdb] 4030463 512-byte hardware
>>>> >>>>>>>> sectors (2064
>>>> >>>>>>>> MB)
>>>> >>>>>>>> [ 9.935864] sd 2:0:0:0: [sdb] Write Protect is off
>>>> >>>>>>>> [ 9.935867] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
>>>> >>>>>>>> [ 9.935871] sd 2:0:0:0: [sdb] Assuming drive cache: write
>>>> >>>>>>>> through
>>>> >>>>>>>> [ 9.938722] sd 2:0:0:0: [sdb] 4030463 512-byte hardware
>>>> >>>>>>>> sectors (2064
>>>> >>>>>>>> MB)
>>>> >>>>>>>> [ 9.939596] sd 2:0:0:0: [sdb] Write Protect is off
>>>> >>>>>>>> [ 9.939599] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
>>>> >>>>>>>> [ 9.939602] sd 2:0:0:0: [sdb] Assuming drive cache: write
>>>> >>>>>>>> through
>>>> >>>>>>>> [ 9.939609] sdb: sdb1
>>>> >>>>>>>> [ 10.048277] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>>>> >>>>>>>> [ 10.048598] sd 2:0:0:0: Attached scsi generic sg2 type 0
>>>> >>>>>>>> [ 13.037997] udevd version 124 started
>>>> >>>>>>>> [ 13.699612] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>> >>>>>>>> [ 13.774796] shpchp: Standard Hot Plug PCI Controller Driver
>>>> >>>>>>>> version:
>>>> >>>>>>>> 0.4
>>>> >>>>>>>> [ 13.843248] Linux agpgart interface v0.103
>>>> >>>>>>>> [ 13.891353] agpgart-ati 0000:00:00.0: Ati IGP345M chipset
>>>> >>>>>>>> [ 13.961486] agpgart-ati 0000:00:00.0: AGP aperture is 128M @
>>>> >>>>>>>> 0xe8000000
>>>> >>>>>>>> [ 14.388428] Yenta: CardBus bridge found at 0000:00:0a.0
>>>> >>>>>>>> [104d:8158]
>>>> >>>>>>>> [ 14.458941] ACPI: AC Adapter [ACAD] (on-line)
>>>> >>>>>>>> [ 14.516681] Yenta: ISA IRQ mask 0x00a8, PCI irq 11
>>>> >>>>>>>> [ 14.516687] Socket status: 30000006
>>>> >>>>>>>> [ 14.517213] input: Power Button (FF) as
>>>> >>>>>>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>>>> >>>>>>>> [ 14.528123] ACPI: Power Button (FF) [PWRF]
>>>> >>>>>>>> [ 14.528426] input: Power Button (CM) as
>>>> >>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>>>> >>>>>>>> [ 14.544105] ACPI: Power Button (CM) [PBTN]
>>>> >>>>>>>> [ 14.544448] input: Lid Switch as
>>>> >>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
>>>> >>>>>>>> [ 14.544632] ACPI: Lid Switch [LID]
>>>> >>>>>>>> [ 14.563247] Yenta: CardBus bridge found at 0000:00:0a.1
>>>> >>>>>>>> [104d:8158]
>>>> >>>>>>>> [ 14.692359] Yenta: ISA IRQ mask 0x00a8, PCI irq 10
>>>> >>>>>>>> [ 14.692364] Socket status: 30000006
>>>> >>>>>>>> [ 14.694501] ACPI: EC: non-query interrupt received,
>>>> >>>>>>>> switching to
>>>> >>>>>>>> interrupt mode
>>>> >>>>>>>> [ 14.698825] ali15x3_smbus 0000:00:06.0: ALI15X3_smb region
>>>> >>>>>>>> uninitialized - upgrade BIOS or use force_addr=0xaddr
>>>> >>>>>>>> [ 14.698834] ali15x3_smbus 0000:00:06.0: ALI15X3 not
>>>> >>>>>>>> detected,
>>>> >>>>>>>> module not inserted.
>>>> >>>>>>>> [ 14.904580] ACPI: Battery Slot [BAT1] (battery present)
>>>> >>>>>>>> [ 15.944450] sony-laptop: Sony Notebook Control Driver v0.6.
>>>> >>>>>>>> [ 15.971330] input: Sony Vaio Keys as
>>>> >>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/SNY5001:00/input/input5
>>>> >>>>>>>> [ 15.984278] input: Sony Vaio Jogdial as
>>>> >>>>>>>> /devices/virtual/input/input6
>>>> >>>>>>>> [ 16.158529] input: Video Bus as
>>>> >>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0a/device:0b/input/input7
>>>> >>>>>>>> [ 16.172136] ACPI: Video Device [VGA] (multi-head: yes rom:
>>>> >>>>>>>> no post:
>>>> >>>>>>>> no)
>>>> >>>>>>>> [ 16.183661] parport_pc 00:0a: reported by Plug and Play ACPI
>>>> >>>>>>>> [ 16.183770] parport0: PC-style at 0x378 (0x778), irq 7, dma
>>>> >>>>>>>> 3
>>>> >>>>>>>> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>>>> >>>>>>>> [ 16.216264] ALI 5451 0000:00:04.0: power state changed by
>>>> >>>>>>>> ACPI to D0
>>>> >>>>>>>> [ 16.216633] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ
>>>> >>>>>>>> 11
>>>> >>>>>>>> [ 16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7]
>>>> >>>>>>>> -> GSI
>>>> >>>>>>>> 11 (level, low) -> IRQ 11
>>>> >>>>>>>> [ 16.909332] input: PC Speaker as
>>>> >>>>>>>> /devices/platform/pcspkr/input/input8
>>>> >>>>>>>> [ 17.267206] input: PS/2 Mouse as
>>>> >>>>>>>> /devices/platform/i8042/serio1/input/input9
>>>> >>>>>>>> [ 17.325731] input: AlpsPS/2 ALPS GlidePoint as
>>>> >>>>>>>> /devices/platform/i8042/serio1/input/input10
>>>> >>>>>>>> [ 20.223118] cs: IO port probe 0x100-0x3af: excluding
>>>> >>>>>>>> 0x200-0x207
>>>> >>>>>>>> 0x220-0x22f 0x330-0x337 0x388-0x38f
>>>> >>>>>>>> [ 20.225384] cs: IO port probe 0x3e0-0x4ff: clean.
>>>> >>>>>>>> [ 20.226259] cs: IO port probe 0x820-0x8ff: clean.
>>>> >>>>>>>> [ 20.227243] cs: IO port probe 0x100-0x3af: excluding
>>>> >>>>>>>> 0x200-0x207
>>>> >>>>>>>> 0x220-0x22f 0x330-0x337 0x388-0x38f
>>>> >>>>>>>> [ 20.229477] cs: IO port probe 0x3e0-0x4ff: clean.
>>>> >>>>>>>> [ 20.230351] cs: IO port probe 0x820-0x8ff: clean.
>>>> >>>>>>>> [ 20.231207] cs: IO port probe 0xc00-0xcf7: clean.
>>>> >>>>>>>> [ 20.232294] cs: IO port probe 0xa00-0xaff: clean.
>>>> >>>>>>>> [ 20.234039] cs: IO port probe 0xc00-0xcf7: clean.
>>>> >>>>>>>> [ 20.235080] cs: IO port probe 0xa00-0xaff: clean.
>>>> >>>>>>>> [ 20.848038] AC'97 1 does not respond - RESET
>>>> >>>>>>>> [ 20.864038] AC'97 1 access is not valid [0xffffffff],
>>>> >>>>>>>> removing mixer.
>>>> >>>>>>>> [ 20.864048] ali mixer 1 creating error.
>>>> >>>>>>>> [ 22.042820] lp0: using parport0 (interrupt-driven).
>>>> >>>>>>>> [ 22.270522] Adding 1253028k swap on /dev/sda6. Priority:-1
>>>> >>>>>>>> extents:1 across:1253028k
>>>> >>>>>>>> [ 22.848407] EXT3 FS on sda5, internal journal
>>>> >>>>>>>> [ 24.167105] type=1505 audit(1228349194.280:2):
>>>> >>>>>>>> operation="profile_load"
>>>> >>>>>>>> name="/usr/share/gdm/guest-session/Xsession"
>>>> >>>>>>>> name2="default" pid=4076
>>>> >>>>>>>> [ 24.390331] type=1505 audit(1228349194.504:3):
>>>> >>>>>>>> operation="profile_load" name="/usr/lib/cups/backend/cups-pdf"
>>>> >>>>>>>> name2="default" pid=4081
>>>> >>>>>>>> [ 24.390845] type=1505 audit(1228349194.504:4):
>>>> >>>>>>>> operation="profile_load" name="/usr/sbin/cupsd" name2="default"
>>>> >>>>>>>> pid=4081
>>>> >>>>>>>> [ 24.572943] ip_tables: (C) 2000-2006 Netfilter Core Team
>>>> >>>>>>>> [ 25.424608] ACPI: WMI: Mapper loaded
>>>> >>>>>>>> [ 26.678424] warning: `avahi-daemon' uses 32-bit capabilities
>>>> >>>>>>>> (legacy support in use)
>>>> >>>>>>>> [ 26.744141] apm: BIOS version 1.2 Flags 0x03 (Driver version
>>>> >>>>>>>> 1.16ac)
>>>> >>>>>>>> [ 26.744152] apm: overridden by ACPI.
>>>> >>>>>>>> [ 26.974597] ppdev: user-space parallel port driver
>>>> >>>>>>>> [ 27.370850] sonypi: Sony Programmable I/O Controller Driver
>>>> >>>>>>>> v1.26.
>>>> >>>>>>>> [ 27.373115] sonypi: please try the sony-laptop module
>>>> >>>>>>>> instead and
>>>> >>>>>>>> report failures, see also
>>>> >>>>>>>> http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
>>>> >>>>>>>> [ 27.376122] sonypi: detected type2 model, verbose = 0,
>>>> >>>>>>>> fnkeyinit =
>>>> >>>>>>>> off, camera = off, compat = off, mask = 0xffffffff, useinput =
>>>> >>>>>>>> on,
>>>> >>>>>>>> acpi = on
>>>> >>>>>>>> [ 27.376136] sonypi: enabled at irq=11, port1=0x1080,
>>>> >>>>>>>> port2=0x1084
>>>> >>>>>>>> [ 27.376139] sonypi: device allocated minor is 60
>>>> >>>>>>>> [ 27.381187] input: Sony Vaio Jogdial as
>>>> >>>>>>>> /devices/platform/sonypi/input/input11
>>>> >>>>>>>> [ 27.412392] input: Sony Vaio Keys as
>>>> >>>>>>>> /devices/platform/sonypi/input/input12
>>>> >>>>>>>> [ 27.485856] sonypi command failed at
>>>> >>>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1
>>>> >>>>>>>> (line
>>>> >>>>>>>> 653)
>>>> >>>>>>>> [ 27.529505] sonypi command failed at
>>>> >>>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2
>>>> >>>>>>>> (line
>>>> >>>>>>>> 664)
>>>> >>>>>>>> [ 27.573141] sonypi command failed at
>>>> >>>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2
>>>> >>>>>>>> (line
>>>> >>>>>>>> 666)
>>>> >>>>>>>> [ 27.616781] sonypi command failed at
>>>> >>>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1
>>>> >>>>>>>> (line
>>>> >>>>>>>> 653)
>>>> >>>>>>>> [ 29.719152] Bluetooth: Core ver 2.13
>>>> >>>>>>>> [ 29.722230] NET: Registered protocol family 31
>>>> >>>>>>>> [ 29.722240] Bluetooth: HCI device and connection manager
>>>> >>>>>>>> initialized
>>>> >>>>>>>> [ 29.722246] Bluetooth: HCI socket layer initialized
>>>> >>>>>>>> [ 29.747817] Bluetooth: L2CAP ver 2.11
>>>> >>>>>>>> [ 29.747828] Bluetooth: L2CAP socket layer initialized
>>>> >>>>>>>> [ 29.775634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>>>> >>>>>>>> [ 29.775643] Bluetooth: BNEP filters: protocol multicast
>>>> >>>>>>>> [ 29.798271] Bluetooth: RFCOMM socket layer initialized
>>>> >>>>>>>> [ 29.798654] Bluetooth: RFCOMM TTY layer initialized
>>>> >>>>>>>> [ 29.798663] Bluetooth: RFCOMM ver 1.10
>>>> >>>>>>>> [ 29.829262] Bridge firewalling registered
>>>> >>>>>>>> [ 29.830471] pan0: Dropping NETIF_F_UFO since no
>>>> >>>>>>>> NETIF_F_HW_CSUM
>>>> >>>>>>>> feature.
>>>> >>>>>>>> [ 29.848436] Bluetooth: SCO (Voice Link) ver 0.6
>>>> >>>>>>>> [ 29.848468] Bluetooth: SCO socket layer initialized
>>>> >>>>>>>> [ 31.798487] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ
>>>> >>>>>>>> 10
>>>> >>>>>>>> [ 31.798514] pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI
>>>> >>>>>>>> 10
>>>> >>>>>>>> (level, low) -> IRQ 10
>>>> >>>>>>>> [ 32.045868] [drm] Initialized drm 1.1.0 20060810
>>>> >>>>>>>> [ 32.065087] [drm] Initialized radeon 1.29.0 20080528 on
>>>> >>>>>>>> minor 0
>>>> >>>>>>>> [ 32.408164] agpgart-ati 0000:00:00.0: AGP 2.0 bridge
>>>> >>>>>>>> [ 32.408203] agpgart-ati 0000:00:00.0: putting AGP V2 device
>>>> >>>>>>>> into 4x
>>>> >>>>>>>> mode
>>>> >>>>>>>> [ 32.408255] pci 0000:01:05.0: putting AGP V2 device into 4x
>>>> >>>>>>>> mode
>>>> >>>>>>>> [ 32.559341] [drm] Setting GART location based on new memory
>>>> >>>>>>>> map
>>>> >>>>>>>> [ 32.559362] [drm] Loading R100 Microcode
>>>> >>>>>>>> [ 32.559410] [drm] writeback test succeeded in 1 usecs
>>>> >>>>>>>> [ 33.960725] eth0: link down
>>>> >>>>>>>> [ 133.708158] ppdev0: registered pardevice
>>>> >>>>>>>> [ 133.756068] ppdev0: unregistered pardevice
>>>> >>>>>>>> [ 135.520452] ppdev0: registered pardevice
>>>> >>>>>>>> [ 135.568396] ppdev0: unregistered pardevice
>>>> >>>>>>>> [ 135.796362] type=1503 audit(1228349305.912:5):
>>>> >>>>>>>> operation="inode_permission" requested_mask="r::"
>>>> >>>>>>>> denied_mask="r::"
>>>> >>>>>>>> fsuid=7 name="/proc/5785/net/" pid=5785
>>>> >>>>>>>> profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.906488] NET: Registered protocol family 10
>>>> >>>>>>>> [ 135.908629] lo: Disabled Privacy Extensions
>>>> >>>>>>>> [ 135.910608] ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>> >>>>>>>> [ 135.913224] type=1503 audit(1228349306.028:6):
>>>> >>>>>>>> operation="socket_create" family="ax25" sock_type="dgram"
>>>> >>>>>>>> protocol=0
>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.913252] type=1503 audit(1228349306.028:7):
>>>> >>>>>>>> operation="socket_create" family="netrom" sock_type="seqpacket"
>>>> >>>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.913261] type=1503 audit(1228349306.028:8):
>>>> >>>>>>>> operation="socket_create" family="rose" sock_type="dgram"
>>>> >>>>>>>> protocol=0
>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.913268] type=1503 audit(1228349306.028:9):
>>>> >>>>>>>> operation="socket_create" family="ipx" sock_type="dgram"
>>>> >>>>>>>> protocol=0
>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.913275] type=1503 audit(1228349306.028:10):
>>>> >>>>>>>> operation="socket_create" family="appletalk" sock_type="dgram"
>>>> >>>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.913282] type=1503 audit(1228349306.028:11):
>>>> >>>>>>>> operation="socket_create" family="econet" sock_type="dgram"
>>>> >>>>>>>> protocol=0
>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.913289] type=1503 audit(1228349306.028:12):
>>>> >>>>>>>> operation="socket_create" family="ash" sock_type="dgram"
>>>> >>>>>>>> protocol=0
>>>> >>>>>>>> pid=5785 profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.913296] type=1503 audit(1228349306.028:13):
>>>> >>>>>>>> operation="socket_create" family="x25" sock_type="seqpacket"
>>>> >>>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.913425] type=1503 audit(1228349306.028:14):
>>>> >>>>>>>> operation="inode_permission" requested_mask="::r"
>>>> >>>>>>>> denied_mask="::r"
>>>> >>>>>>>> fsuid=7 name="/proc/5785/net/dev" pid=5785
>>>> >>>>>>>> profile="/usr/sbin/cupsd"
>>>> >>>>>>>> [ 135.939426] ppdev0: registered pardevice
>>>> >>>>>>>> [ 135.988553] ppdev0: unregistered pardevice
>>>> >>>>>>>>
>>>> >>>>>>>> Module Size Used by
>>>> >>>>>>>> ipv6 263972 8
>>>> >>>>>>>> nls_iso8859_1 12032 1
>>>> >>>>>>>> nls_cp437 13696 1
>>>> >>>>>>>> vfat 18816 1
>>>> >>>>>>>> fat 57376 1 vfat
>>>> >>>>>>>> binfmt_misc 16904 1
>>>> >>>>>>>> radeon 147616 2
>>>> >>>>>>>> drm 86056 3 radeon
>>>> >>>>>>>> sco 18308 2
>>>> >>>>>>>> bridge 56980 0
>>>> >>>>>>>> stp 10628 1 bridge
>>>> >>>>>>>> rfcomm 44432 0
>>>> >>>>>>>> bnep 20480 2
>>>> >>>>>>>> l2cap 30464 6 rfcomm,bnep
>>>> >>>>>>>> bluetooth 61924 6 sco,rfcomm,bnep,l2cap
>>>> >>>>>>>> sonypi 26648 0
>>>> >>>>>>>> ppdev 15620 0
>>>> >>>>>>>> speedstep_lib 12676 0
>>>> >>>>>>>> cpufreq_userspace 11396 0
>>>> >>>>>>>> cpufreq_ondemand 14988 0
>>>> >>>>>>>> cpufreq_stats 13188 0
>>>> >>>>>>>> cpufreq_powersave 9856 0
>>>> >>>>>>>> cpufreq_conservative 14600 0
>>>> >>>>>>>> freq_table 12672 2 cpufreq_ondemand,cpufreq_stats
>>>> >>>>>>>> wmi 14504 0
>>>> >>>>>>>> pci_slot 12552 0
>>>> >>>>>>>> sbs 19464 0
>>>> >>>>>>>> sbshc 13440 1 sbs
>>>> >>>>>>>> iptable_filter 10752 0
>>>> >>>>>>>> ip_tables 19600 1 iptable_filter
>>>> >>>>>>>> x_tables 22916 1 ip_tables
>>>> >>>>>>>> sbp2 29324 0
>>>> >>>>>>>> lp 17156 0
>>>> >>>>>>>> joydev 18368 0
>>>> >>>>>>>> pcmcia 43052 0
>>>> >>>>>>>> evdev 17696 16
>>>> >>>>>>>> psmouse 45200 0
>>>> >>>>>>>> serio_raw 13444 0
>>>> >>>>>>>> pcspkr 10624 0
>>>> >>>>>>>> snd_ali5451 27532 3
>>>> >>>>>>>> parport_pc 39204 1
>>>> >>>>>>>> video 25104 0
>>>> >>>>>>>> snd_ac97_codec 111652 1 snd_ali5451
>>>> >>>>>>>> parport 42604 3 ppdev,lp,parport_pc
>>>> >>>>>>>> output 11008 1 video
>>>> >>>>>>>> ac97_bus 9856 1 snd_ac97_codec
>>>> >>>>>>>> snd_pcm_oss 46848 0
>>>> >>>>>>>> sony_laptop 39004 0
>>>> >>>>>>>> snd_mixer_oss 22784 1 snd_pcm_oss
>>>> >>>>>>>> snd_pcm 83204 3
>>>> >>>>>>>> snd_ali5451,snd_ac97_codec,snd_pcm_oss
>>>> >>>>>>>> snd_seq_dummy 10884 0
>>>> >>>>>>>> container 11520 0
>>>> >>>>>>>> snd_seq_oss 38528 0
>>>> >>>>>>>> snd_seq_midi 14336 0
>>>> >>>>>>>> i2c_ali1535 14340 0
>>>> >>>>>>>> snd_rawmidi 29824 1 snd_seq_midi
>>>> >>>>>>>> snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
>>>> >>>>>>>> i2c_ali15x3 14852 0
>>>> >>>>>>>> battery 18436 0
>>>> >>>>>>>> snd_seq 57776 6
>>>> >>>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
>>>> >>>>>>>> button 14224 0
>>>> >>>>>>>> ac 12292 0
>>>> >>>>>>>> yenta_socket 31756 2
>>>> >>>>>>>> snd_timer 29960 2 snd_pcm,snd_seq
>>>> >>>>>>>> snd_seq_device 15116 5
>>>> >>>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
>>>> >>>>>>>> rsrc_nonstatic 19072 1 yenta_socket
>>>> >>>>>>>> i2c_core 31892 2 i2c_ali1535,i2c_ali15x3
>>>> >>>>>>>> pcmcia_core 43412 3
>>>> >>>>>>>> pcmcia,yenta_socket,rsrc_nonstatic
>>>> >>>>>>>> snd 63268 16
>>>> >>>>>>>> snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
>>>> >>>>>>>> soundcore 15328 1 snd
>>>> >>>>>>>> snd_page_alloc 16136 1 snd_pcm
>>>> >>>>>>>> ati_agp 14988 1
>>>> >>>>>>>> agpgart 42184 2 drm,ati_agp
>>>> >>>>>>>> shpchp 37908 0
>>>> >>>>>>>> pci_hotplug 35236 1 shpchp
>>>> >>>>>>>> ext3 133256 1
>>>> >>>>>>>> jbd 55444 1 ext3
>>>> >>>>>>>> mbcache 16004 1 ext3
>>>> >>>>>>>> sr_mod 22212 0
>>>> >>>>>>>> cdrom 43168 1 sr_mod
>>>> >>>>>>>> sd_mod 42264 6
>>>> >>>>>>>> crc_t10dif 9984 1 sd_mod
>>>> >>>>>>>> usb_storage 81728 1
>>>> >>>>>>>> libusual 27156 1 usb_storage
>>>> >>>>>>>> sg 39732 0
>>>> >>>>>>>> pata_acpi 12160 0
>>>> >>>>>>>> pata_ali 16516 3
>>>> >>>>>>>> 8139too 31616 0
>>>> >>>>>>>> ata_generic 12932 0
>>>> >>>>>>>> libata 177312 3 pata_acpi,pata_ali,ata_generic
>>>> >>>>>>>> 8139cp 27520 0
>>>> >>>>>>>> uhci_hcd 30736 0
>>>> >>>>>>>> ehci_hcd 43276 0
>>>> >>>>>>>> mii 13440 2 8139too,8139cp
>>>> >>>>>>>> scsi_mod 155212 6
>>>> >>>>>>>> sbp2,sr_mod,sd_mod,usb_storage,sg,libata
>>>> >>>>>>>> dock 16656 1 libata
>>>> >>>>>>>> ohci1394 37936 0
>>>> >>>>>>>> usbcore 148848 5
>>>> >>>>>>>> usb_storage,libusual,uhci_hcd,ehci_hcd
>>>> >>>>>>>> ieee1394 96324 2 sbp2,ohci1394
>>>> >>>>>>>> thermal 23708 0
>>>> >>>>>>>> processor 42156 2 thermal
>>>> >>>>>>>> fan 12548 0
>>>> >>>>>>>> fbcon 47648 0
>>>> >>>>>>>> tileblit 10880 1 fbcon
>>>> >>>>>>>> font 16512 1 fbcon
>>>> >>>>>>>> bitblit 13824 1 fbcon
>>>> >>>>>>>> softcursor 9984 1 bitblit
>>>> >>>>>>>> fuse 60828 5
>>>> >>>>>>>>
>>>> >>>>>>>> #########################################################
>>>> >>>>>>>>
>>>> >>>>>>>> I undrestand almost nothing this time! So, please help me.
>>>> >>>>>>>>
>>>> >>>>>>>>
>>>> >>>>>>>>
>>>> >>>>>>>> Thank you.
>>>> >>>>>>>>
>>>> >>>>>>>
>>>> >>>>>>
>>>> >>>>>
>>>> >>>>
>>>> >>>
>>>> >>
>>>> >
>>>>
>>>
>>
>
(cd /lib/modules/2.6.27-7-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.27-7-generic/build" "M=/usr/lib/hsfmodem/modules" "CC=gcc" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.27-7-generic'
make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-7-generic'
(cd /lib/modules/2.6.27-7-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.27-7-generic/build" "M=/usr/lib/hsfmodem/modules/GPL/hda" "CC=gcc" "HDA_CFLAGS=-DFOUND_KZALLOC -DFOUND_TLV -DFOUND_IRQ_HANDLER_T -DFOUND_DELAYED_WORK -DFOUND_NO_CTL_ELEM_RW" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.27-7-generic'
make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-7-generic'
rm -rf *.o GPL/*.o *.ko GPL/*.ko *.mod.c GPL/*.mod.c .*.cmd GPL/.*.cmd .tmp_versions .tmp_versions /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfosspec.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfserial.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfengine.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfpcibasic2.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfpcibasic3.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfhda.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfmc97ich.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfmc97via.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfmc97ali.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfmc97ati.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfmc97sis.mod /lib/modules/2.6.27-7-generic/build/.tmp_versions/hsfsoar.mod Modules.symvers GPL/hda/Modules.symvers
(cd /lib/modules/2.6.27-7-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.27-7-generic/build" "M=/usr/lib/hsfmodem/modules" "CC=gcc" modules)
make[1]: Entering directory `/usr/src/linux-headers-2.6.27-7-generic'
CC [M] /usr/lib/hsfmodem/modules/mod_engine.o
CC [M] /usr/lib/hsfmodem/modules/mod_hda.o
CC [M] /usr/lib/hsfmodem/modules/mod_mc97ali.o
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97ali.c:14:
include/linux/semaphore.h:29:1: warning: "DECLARE_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97ali.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:335:1: warning: this is the location of the previous definition
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97ali.c:14:
include/linux/semaphore.h:39:1: warning: "init_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97ali.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:336:1: warning: this is the location of the previous definition
CC [M] /usr/lib/hsfmodem/modules/mod_mc97ati.o
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97ati.c:14:
include/linux/semaphore.h:29:1: warning: "DECLARE_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97ati.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:335:1: warning: this is the location of the previous definition
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97ati.c:14:
include/linux/semaphore.h:39:1: warning: "init_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97ati.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:336:1: warning: this is the location of the previous definition
CC [M] /usr/lib/hsfmodem/modules/mod_mc97ich.o
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97ich.c:14:
include/linux/semaphore.h:29:1: warning: "DECLARE_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97ich.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:335:1: warning: this is the location of the previous definition
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97ich.c:14:
include/linux/semaphore.h:39:1: warning: "init_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97ich.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:336:1: warning: this is the location of the previous definition
CC [M] /usr/lib/hsfmodem/modules/mod_mc97sis.o
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97sis.c:14:
include/linux/semaphore.h:29:1: warning: "DECLARE_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97sis.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:335:1: warning: this is the location of the previous definition
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97sis.c:14:
include/linux/semaphore.h:39:1: warning: "init_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97sis.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:336:1: warning: this is the location of the previous definition
CC [M] /usr/lib/hsfmodem/modules/mod_mc97via.o
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97via.c:14:
include/linux/semaphore.h:29:1: warning: "DECLARE_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97via.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:335:1: warning: this is the location of the previous definition
In file included from include/linux/device.h:24,
from include/linux/pci.h:53,
from /usr/lib/hsfmodem/modules/mod_mc97via.c:14:
include/linux/semaphore.h:39:1: warning: "init_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_mc97via.c:9:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:336:1: warning: this is the location of the previous definition
CC [M] /usr/lib/hsfmodem/modules/mod_osspec.o
In file included from include/linux/device.h:24,
from include/linux/usb.h:18,
from /usr/lib/hsfmodem/modules/include/osusb.h:25,
from /usr/lib/hsfmodem/modules/mod_osspec.c:27:
include/linux/semaphore.h:29:1: warning: "DECLARE_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_osspec.c:12:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:335:1: warning: this is the location of the previous definition
In file included from include/linux/device.h:24,
from include/linux/usb.h:18,
from /usr/lib/hsfmodem/modules/include/osusb.h:25,
from /usr/lib/hsfmodem/modules/mod_osspec.c:27:
include/linux/semaphore.h:39:1: warning: "init_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_osspec.c:12:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:336:1: warning: this is the location of the previous definition
In file included from include/linux/device.h:24,
from include/linux/usb.h:18,
from /usr/lib/hsfmodem/modules/include/osusb.h:25,
from /usr/lib/hsfmodem/modules/mod_osspec.c:27:
include/linux/semaphore.h:29:1: warning: "DECLARE_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_osspec.c:12:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:335:1: warning: this is the location of the previous definition
In file included from include/linux/device.h:24,
from include/linux/usb.h:18,
from /usr/lib/hsfmodem/modules/include/osusb.h:25,
from /usr/lib/hsfmodem/modules/mod_osspec.c:27:
include/linux/semaphore.h:39:1: warning: "init_MUTEX" redefined
In file included from /usr/lib/hsfmodem/modules/mod_osspec.c:12:
/usr/lib/hsfmodem/modules/GPL/oscompat.h:336:1: warning: this is the location of the previous definition
CC [M] /usr/lib/hsfmodem/modules/osservices.o
/usr/lib/hsfmodem/modules/osservices.c:182: error: field 'semaphore' has incomplete type
/usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_OsLockCreate':
/usr/lib/hsfmodem/modules/osservices.c:194: error: implicit declaration of function 'sema_init'
/usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_OsLockLock':
/usr/lib/hsfmodem/modules/osservices.c:221: error: implicit declaration of function 'down_trylock'
/usr/lib/hsfmodem/modules/osservices.c:230: error: implicit declaration of function 'down'
/usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_OsLockUnlock':
/usr/lib/hsfmodem/modules/osservices.c:252: error: implicit declaration of function 'up'
/usr/lib/hsfmodem/modules/osservices.c: In function 'OsThreadStop':
/usr/lib/hsfmodem/modules/osservices.c:626: error: implicit declaration of function 'kill_proc'
make[2]: *** [/usr/lib/hsfmodem/modules/osservices.o] Error 1
make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-7-generic'
make: *** [all] Error 2
