Hooman for 10b9:5451 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device with subsystem 104d:8158 having a Conexant modem chip, Get hsfmodem_7.68.00.14full_k2.6.27_7_generic_ubuntu_i386.deb.zip from http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php Under Linux $ unzip hsf*.zip to unpack, and to install $ sudo dpkg -i hsf*.deb Afterwards reboot, and check for basic modem recognition with: $ sudo wvdialconf /etc/wvdial.conf If the modem is detected, put in personal info with $ sudo gedit /etc/wvdial.conf while removing the symbols ; < > Save and try a dialout with: $ sudo wvdial MarvS On Fri, Dec 5, 2008 at 10:27 AM, Hooman Tadbiri <hooman.tadbiri@xxxxxxxxx> wrote: > I typed them below, please see: > ->General: > SoftK56 Data Fax CARP > Device rype: Medems > Manufacturer: CXT > Location: PCI bus 0, device 3, function 0 > ->Diagnostics: > Modem Information > (Field> Value) > Hardware ID> PCI\VEN_10B9&DEV_5457&SUBSYS_8158104D&REV_00 > >Query Modem: > (Command> Response) > ATQ0V1E0> Success > AT+GMM> +GMM: SoftK56 Data Fax CARP > AT+FCLASS=?> 0,1 > AT#CLS=?> COMMAND NOT SUPPORTED > AT+GCI?> +GCI: B4 > AT+GCI=?> +GCI: > (B5,0A,0F,20,26,2E,31,3C,3D,04,46,50,51,52,53,54,57,58,59,00,61,69,6C,73,7B,7E,82,89,89,8B,9C,9F,A0,A5,A6,FE,A9,B4,09,AE,8A,B3,B8,FC,1B,FA,FB,07,0D,14,16,1A,25,27,2B,2D,33,35,36,37,49,4E,62,4F,63,68,1C,88,98,84,85,87,8E,A1,B7,BB,BC,B2,F8,70,0C,8C,6A) > ATI1> 255 > ATI2> Success > ATI3> SoftK56V B2.1 V6.01.20 > ATI4> SoftK56 Data Fax CARP > ATI5> 180 > ATI6> SoftK56 > > CModem Version 12 > > RKsample Version 342 > ATI7> 225 > ->Driver > SoftK56 Data Fax CARP > Driver Provider: CXT > Driver Date: 20/03/2003 > Driver Version: 6.1.20.0 > Digital Signer: Microsoft Windows Hardware Campatibility Publisher > >Driver Details...: > SoftK56 Date Fax CARP > Driver files: > C:\Program > Files\CONEXANT\CNXT_MODEM_PCI_VEN_10B9&DEV_5457&SUBSYS_8158104D\HXFSetup.exe > C:\WINDOWS\system32\carpdll.dll > C:\WINDOWS\system32\carpserv.exe > C:\WINDOWS\SYSTEM32\DRIVERS\HSF_CNXT.sys > C:\WINDOWS\SYSTEM32\DRIVERS\HSF_DP.sys > C:\WINDOWS\SYSTEM32\DRIVERS\HSFHWALI.sys > C:\WINDOWS\SYSTEM32\DRIVERS\mdmxsdk.sys > C:\WINDOWS\system32\drivers\Modem.sys > C:\WINDOWS\SYSTEM32\DRIVERS\Snyunif.cty > C:\WINDOWS\SYSTEM32\DRIVERS\strmdisp.sys > C:\WINDOWS\system32\HSFCI005.dll > C:\WINDOWS\system32\mdmxsdk.dll > Provider: Conexant Systems, Inc. > File version: 2.0.0.0 > Copyright: Copyright(c) Conexant Systems, Inc. 2002 > Digital Signer: Microsoft Windows Hardware Campatibility > > Now, please tell me what to do. > Thanks a lot for your helps. > Hooman. > > On Fri, Dec 5, 2008 at 8:21 AM, Marvin Stodolsky > <marvin.stodolsky@xxxxxxxxx> wrote: >> Hooman >> Please Subscribe to the List through the SUBSCRIBE link at www.linmodems.org >> so that your messages to not have to be manually forwarded. >> >> >> Using MicroSoft(MS) Windows diagnostics: >> ----------------------------- >> MS installations do generally have adequate diagostic capability. Try >> the following >> routine 1), beginning with mouse clicks on: >> 1) Start > Settings > Control Panel > Classical View (for Window >> XP) > System >>> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to >> expand the graphic. Manufacturer information may be displayed. For example, CXT >> stands for Conexant. Click the Diagnostics Tab. Record any hardware ID >> or vendor >> and device information. >> Next do the Query Modem and record the ATI specifications displayed such as: >> ATI3 - Agere SoftModem Version 2.1.22 >> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >> >> Also Click on the Driver Details TAB, and copy out the information therein. >> >> Send the information thus acquired to the List, not directly to me. >> . >> MarvS >> >> >> >> On Thu, Dec 4, 2008 at 12:59 PM, Hooman Tadbiri >> <hooman.tadbiri@xxxxxxxxx> wrote: >>> There is no softModem in Modem/DOCs! There is only YourSystem.txt >>> there. Everything is attached, You can see it! What should I do?! >>> Thanks. >>> >>> On Thu, Dec 4, 2008 at 11:07 PM, Marvin Stodolsky >>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>> It should be in the folder Modem/DOC/ >>>> NOT BEING under Linux now, I can access your attachment >>>> >>>> MarvS >>>> >>>> On Thu, Dec 4, 2008 at 8:30 AM, Hooman Tadbiri <hooman.tadbiri@xxxxxxxxx> wrote: >>>>> Thank you for the answer, but I can't find the SoftModem.txt file; >>>>> please tell me where to find it. Here I attached all the files >>>>> scanModem generated, please visit. >>>>> (+By the way this may help: I'm using an old Sony laptop computer) >>>>> Thanks, >>>>> Hooman. >>>>> >>>>> On 12/4/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>> Hooman, >>>>>> >>>>>> Following the instructions in SoftModem.txt >>>>>> run the modem disgnostics under Microsoft. >>>>>> It is desirable to first determine if your modem has a Conexant chip. >>>>>> >>>>>> MarvS >>>>>> >>>>>> On Wed, Dec 3, 2008 at 1:28 PM, Hooman Tadbiri <hooman.tadbiri@xxxxxxxxx> >>>>>> wrote: >>>>>>> To whom it may concern, >>>>>>> >>>>>>> >>>>>>> I had used scanModem several times on several computers and I have >>>>>>> never got such messages like these: >>>>>>> >>>>>>> ####################Linux Terminal#################### >>>>>>> hooman@hooman-laptop:~/Desktop$ sudo ./scanModem >>>>>>> >>>>>>> [sudo] password for hooman: >>>>>>> >>>>>>> UPDATE=2008_11_06 >>>>>>> >>>>>>> There are weekly updates of scanModem. Your copy is more than >>>>>>> >>>>>>> 4 weeks old!! >>>>>>> >>>>>>> If decisive guidance is not provided by this scanModem of 2008_11_06, >>>>>>> >>>>>>> download an update from http://linmodems.technion.ac.il >>>>>>> >>>>>>> Continuing in 10 seconds. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Identifying PCI bus slots with candidate modems. >>>>>>> >>>>>>> Running PCIbus cases >>>>>>> >>>>>>> Analysing card in PCI bus 00:03.0, writing to scanout.00:03.0 >>>>>>> >>>>>>> Please load the candidate driver slamr, with Admin/root command: >>>>>>> >>>>>>> sudo modprobe slamr >>>>>>> >>>>>>> Then rerun >>>>>>> >>>>>>> ./scanModem >>>>>>> >>>>>>> hooman@hooman-laptop:~/Desktop$ sudo modprobe slamr >>>>>>> >>>>>>> FATAL: Module slamr not found. >>>>>>> ####################ModemDate.txt#################### >>>>>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List >>>>>>> Server, >>>>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>>>> YourName, YourCountry kernel 2.6.27-7-generic >>>>>>> With this Subject Line cogent experts will be alerted, and useful >>>>>>> case names left in the Archive. >>>>>>> YourCountry will enable Country specific guidance. Linux experts in >>>>>>> YourCountry >>>>>>> can be found through: http://www.linux.org/groups/index.html. >>>>>>> They will know your Country's modem code, which may be essential for >>>>>>> dialup service. >>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>>>>>> Internet Provider mail filters. >>>>>>> So in a day, also check the Archived responses at >>>>>>> http://www.linmodems.org >>>>>>> -------------------------- System information >>>>>>> ---------------------------- >>>>>>> CPU=i686, >>>>>>> Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 >>>>>>> (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 >>>>>>> scanModem update of: 2008_11_06 >>>>>>> >>>>>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>>>>> Attached USB devices are: >>>>>>> ID 126f:0163 TwinMOS >>>>>>> ID 1d6b:0002 Linux Foundation 2.0 root hub >>>>>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>>> ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>>> >>>>>>> USB modems not recognized >>>>>>> >>>>>>> For candidate card in slot 00:03.0, firmware information and bootup >>>>>>> diagnostics are: >>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>> ---------- --------- --------- -------------- >>>>>>> 00:03.0 10b9:5457 104d:8158 Modem: ALi Corporation M5457 AC'97 Modem >>>>>>> Controller >>>>>>> >>>>>>> Modem interrupt assignment and sharing: >>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI 5451, >>>>>>> sonypi, eth0 >>>>>>> --- Bootup diagnostics for card in PCI slot 00:03.0 ---- >>>>>>> [ 0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000, e0400fff] >>>>>>> [ 0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff] >>>>>>> [ 0.421142] pci 0000:00:03.0: PME# supported from D3hot D3cold >>>>>>> [ 0.421147] pci 0000:00:03.0: PME# disabled >>>>>>> [ 1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> GSI 11 >>>>>>> (level, low) -> IRQ 11 >>>>>>> [ 1.671508] serial 0000:00:03.0: PCI INT A disabled >>>>>>> >>>>>>> The PCI slot 00:03.0 of the modem card may be disabled early in >>>>>>> a bootup process, but then enabled later. If modem drivers load >>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible >>>>>>> fixes. >>>>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>>>>> if help is needed. >>>>>>> >>>>>>> >>>>>>> For candidate card in slot 00:04.0, firmware information and bootup >>>>>>> diagnostics are: >>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>> ---------- --------- --------- -------------- >>>>>>> 00:04.0 10b9:5451 104d:8158 Multimedia audio controller: ALi >>>>>>> Corporation M5451 PCI AC-Link Controller Audio Device >>>>>>> >>>>>>> Modem interrupt assignment and sharing: >>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI 5451, >>>>>>> sonypi, eth0 >>>>>>> --- Bootup diagnostics for card in PCI slot 00:04.0 ---- >>>>>>> [ 0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff] >>>>>>> [ 0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000, e0401fff] >>>>>>> [ 0.421204] pci 0000:00:04.0: supports D1 >>>>>>> [ 0.421206] pci 0000:00:04.0: supports D2 >>>>>>> [ 0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold >>>>>>> [ 0.421212] pci 0000:00:04.0: PME# disabled >>>>>>> [ 16.216264] ALI 5451 0000:00:04.0: power state changed by ACPI to D0 >>>>>>> [ 16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI >>>>>>> 11 (level, low) -> IRQ 11 >>>>>>> >>>>>>> The PCI slot 00:04.0 of the modem card may be disabled early in >>>>>>> a bootup process, but then enabled later. If modem drivers load >>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible >>>>>>> fixes. >>>>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>>>>> if help is needed. >>>>>>> ####################dmesg.txt#################### >>>>>>> CPU0 >>>>>>> 0: 19627 XT-PIC-XT timer >>>>>>> 1: 466 XT-PIC-XT i8042 >>>>>>> 2: 0 XT-PIC-XT cascade >>>>>>> 3: 2 XT-PIC-XT >>>>>>> 5: 2 XT-PIC-XT >>>>>>> 7: 3 XT-PIC-XT parport0 >>>>>>> 8: 2 XT-PIC-XT rtc0 >>>>>>> 9: 996 XT-PIC-XT acpi >>>>>>> 10: 12650 XT-PIC-XT ohci1394, uhci_hcd:usb2, >>>>>>> ehci_hcd:usb3, yenta, radeon@pci:0000:01:05.0 >>>>>>> 11: 1088 XT-PIC-XT uhci_hcd:usb1, yenta, ALI 5451, >>>>>>> sonypi, eth0 >>>>>>> 12: 5615 XT-PIC-XT i8042 >>>>>>> 14: 8703 XT-PIC-XT pata_ali >>>>>>> 15: 1971 XT-PIC-XT pata_ali >>>>>>> NMI: 0 Non-maskable interrupts >>>>>>> LOC: 0 Local timer interrupts >>>>>>> RES: 0 Rescheduling interrupts >>>>>>> CAL: 0 function call interrupts >>>>>>> TLB: 0 TLB shootdowns >>>>>>> SPU: 0 Spurious interrupts >>>>>>> ERR: 0 >>>>>>> MIS: 0 >>>>>>> >>>>>>> [ 0.000000] Initializing cgroup subsys cpuset >>>>>>> [ 0.000000] Initializing cgroup subsys cpu >>>>>>> [ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc >>>>>>> version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 >>>>>>> UTC 2008 (Ubuntu 2.6.27-7.14-generic) >>>>>>> [ 0.000000] BIOS-provided physical RAM map: >>>>>>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) >>>>>>> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) >>>>>>> [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) >>>>>>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000 (usable) >>>>>>> [ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data) >>>>>>> [ 0.000000] BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS) >>>>>>> [ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) >>>>>>> [ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved) >>>>>>> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) >>>>>>> [ 0.000000] last_pfn = 0x1bf70 max_arch_pfn = 0x100000 >>>>>>> [ 0.000000] kernel direct mapping tables up to 1bf70000 @ 7000-d000 >>>>>>> [ 0.000000] RAMDISK: 1b792000 - 1bf5f052 >>>>>>> [ 0.000000] DMI present. >>>>>>> [ 0.000000] ACPI: RSDP 000F6FD0, 0014 (r0 PTLTD ) >>>>>>> [ 0.000000] ACPI: RSDT 1BF773FE, 002C (r1 SONY K7 6040000 >>>>>>> LTP 0) >>>>>>> [ 0.000000] ACPI: FACP 1BF7BF64, 0074 (r1 SONY K7 6040000 >>>>>>> PTL F4240) >>>>>>> [ 0.000000] ACPI: DSDT 1BF7742A, 4B3A (r1 SONY K7 6040000 >>>>>>> MSFT 100000E) >>>>>>> [ 0.000000] ACPI: FACS 1BF7CFC0, 0040 >>>>>>> [ 0.000000] ACPI: BOOT 1BF7BFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 >>>>>>> LTP 1) >>>>>>> [ 0.000000] ACPI: DMI detected: Sony >>>>>>> [ 0.000000] 0MB HIGHMEM available. >>>>>>> [ 0.000000] 447MB LOWMEM available. >>>>>>> [ 0.000000] mapped low ram: 0 - 1bf70000 >>>>>>> [ 0.000000] low ram: 00000000 - 1bf70000 >>>>>>> [ 0.000000] bootmap 00002000 - 000057f0 >>>>>>> [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - >>>>>>> 001bf70000] >>>>>>> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> >>>>>>> [0000000000 - 0000001000] >>>>>>> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> >>>>>>> [0000001000 - 0000002000] >>>>>>> [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> >>>>>>> [0000006000 - 0000007000] >>>>>>> [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> >>>>>>> [0000100000 - 00005c0a20] >>>>>>> [ 0.000000] #4 [001b792000 - 001bf5f052] RAMDISK ==> >>>>>>> [001b792000 - 001bf5f052] >>>>>>> [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> >>>>>>> [00005c1000 - 00005c4000] >>>>>>> [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> >>>>>>> [000009f800 - 0000100000] >>>>>>> [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> >>>>>>> [0000007000 - 0000009000] >>>>>>> [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> >>>>>>> [0000002000 - 0000006000] >>>>>>> [ 0.000000] Zone PFN ranges: >>>>>>> [ 0.000000] DMA 0x00000000 -> 0x00001000 >>>>>>> [ 0.000000] Normal 0x00001000 -> 0x0001bf70 >>>>>>> [ 0.000000] HighMem 0x0001bf70 -> 0x0001bf70 >>>>>>> [ 0.000000] Movable zone start PFN for each node >>>>>>> [ 0.000000] early_node_map[2] active PFN ranges >>>>>>> [ 0.000000] 0: 0x00000000 -> 0x0000009f >>>>>>> [ 0.000000] 0: 0x00000100 -> 0x0001bf70 >>>>>>> [ 0.000000] On node 0 totalpages: 114447 >>>>>>> [ 0.000000] free_area_init_node: node 0, pgdat c048a500, >>>>>>> node_mem_map c1000000 >>>>>>> [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 >>>>>>> [ 0.000000] Normal zone: 109477 pages, LIFO batch:31 >>>>>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 >>>>>>> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs >>>>>>> [ 0.000000] Local APIC disabled by BIOS -- you can enable it with >>>>>>> "lapic" >>>>>>> [ 0.000000] mapped APIC to ffffb000 (013f2000) >>>>>>> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - >>>>>>> 00000000000a0000 >>>>>>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - >>>>>>> 00000000000dc000 >>>>>>> [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - >>>>>>> 0000000000100000 >>>>>>> [ 0.000000] Allocating PCI resources starting at 30000000 (gap: >>>>>>> 2c000000:d3f80000) >>>>>>> [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data >>>>>>> [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 >>>>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >>>>>>> Total pages: 113440 >>>>>>> [ 0.000000] Kernel command line: >>>>>>> root=UUID=b7e12806-451d-4eef-b86b-a9b65d6c0a3e ro quiet splash >>>>>>> [ 0.000000] Enabling fast FPU save and restore... done. >>>>>>> [ 0.000000] Enabling unmasked SIMD FPU exception support... done. >>>>>>> [ 0.000000] Initializing CPU#0 >>>>>>> [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) >>>>>>> [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. >>>>>>> [ 0.000000] TSC: using PIT calibration value >>>>>>> [ 0.000000] Detected 2658.126 MHz processor. >>>>>>> [ 0.004000] Console: colour VGA+ 80x25 >>>>>>> [ 0.004000] console [tty0] enabled >>>>>>> [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 >>>>>>> bytes) >>>>>>> [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 >>>>>>> bytes) >>>>>>> [ 0.004000] Memory: 440132k/458176k available (2572k kernel code, >>>>>>> 17396k reserved, 1160k data, 424k init, 0k highmem) >>>>>>> [ 0.004000] virtual kernel memory layout: >>>>>>> [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) >>>>>>> [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) >>>>>>> [ 0.004000] vmalloc : 0xdc800000 - 0xff3fe000 ( 555 MB) >>>>>>> [ 0.004000] lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB) >>>>>>> [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) >>>>>>> [ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB) >>>>>>> [ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB) >>>>>>> [ 0.004000] Checking if this processor honours the WP bit even in >>>>>>> supervisor mode...Ok. >>>>>>> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated >>>>>>> [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, >>>>>>> MinObjects=0, CPUs=1, Nodes=1 >>>>>>> [ 0.004014] Calibrating delay loop (skipped), value calculated >>>>>>> using timer frequency.. 5316.25 BogoMIPS (lpj=10632504) >>>>>>> [ 0.004040] Security Framework initialized >>>>>>> [ 0.004051] SELinux: Disabled at boot. >>>>>>> [ 0.004076] AppArmor: AppArmor initialized >>>>>>> [ 0.004091] Mount-cache hash table entries: 512 >>>>>>> [ 0.004326] Initializing cgroup subsys ns >>>>>>> [ 0.004333] Initializing cgroup subsys cpuacct >>>>>>> [ 0.004336] Initializing cgroup subsys memory >>>>>>> [ 0.004359] CPU: Trace cache: 12K uops, L1 D cache: 8K >>>>>>> [ 0.004363] CPU: L2 cache: 512K >>>>>>> [ 0.004367] CPU: Hyper-Threading is disabled >>>>>>> [ 0.004389] Checking 'hlt' instruction... OK. >>>>>>> [ 0.020657] SMP alternatives: switching to UP code >>>>>>> [ 0.028041] Freeing SMP alternatives: 11k freed >>>>>>> [ 0.028049] ACPI: Core revision 20080609 >>>>>>> [ 0.033930] ACPI: Checking initramfs for custom DSDT >>>>>>> [ 0.394845] ACPI: setting ELCR to 0200 (from 0c00) >>>>>>> [ 0.396099] weird, boot CPU (#0) not listedby the BIOS. >>>>>>> [ 0.396102] SMP motherboard not detected. >>>>>>> [ 0.396106] Local APIC not detected. Using dummy APIC emulation. >>>>>>> [ 0.396109] SMP disabled >>>>>>> [ 0.396203] Brought up 1 CPUs >>>>>>> [ 0.396207] Total of 1 processors activated (5316.25 BogoMIPS). >>>>>>> [ 0.396224] CPU0 attaching sched-domain: >>>>>>> [ 0.396229] domain 0: span 0 level CPU >>>>>>> [ 0.396232] groups: 0 >>>>>>> [ 0.396602] net_namespace: 840 bytes >>>>>>> [ 0.396616] Booting paravirtualized kernel on bare hardware >>>>>>> [ 0.396887] Time: 3:36:10 Date: 12/04/08 >>>>>>> [ 0.396941] NET: Registered protocol family 16 >>>>>>> [ 0.397443] EISA bus registered >>>>>>> [ 0.397481] ACPI: bus type pci registered >>>>>>> [ 0.397753] PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=1 >>>>>>> [ 0.397757] PCI: Using configuration type 1 for base access >>>>>>> [ 0.401665] ACPI: EC: Look up EC in DSDT >>>>>>> [ 0.405888] ACPI: Interpreter enabled >>>>>>> [ 0.405894] ACPI: (supports S0 S3 S4 S5) >>>>>>> [ 0.405916] ACPI: Using PIC for interrupt routing >>>>>>> [ 0.420826] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = >>>>>>> 0x62 >>>>>>> [ 0.420831] ACPI: EC: driver started in poll mode >>>>>>> [ 0.420924] ACPI: PCI Root Bridge [PCI0] (0000:00) >>>>>>> [ 0.421036] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000, efffffff] >>>>>>> [ 0.421042] PCI: 0000:00:00.0 reg 14 32bit mmio: [e0800000, e0800fff] >>>>>>> [ 0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000, e0400fff] >>>>>>> [ 0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff] >>>>>>> [ 0.421142] pci 0000:00:03.0: PME# supported from D3hot D3cold >>>>>>> [ 0.421147] pci 0000:00:03.0: PME# disabled >>>>>>> [ 0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff] >>>>>>> [ 0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000, e0401fff] >>>>>>> [ 0.421204] pci 0000:00:04.0: supports D1 >>>>>>> [ 0.421206] pci 0000:00:04.0: supports D2 >>>>>>> [ 0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold >>>>>>> [ 0.421212] pci 0000:00:04.0: PME# disabled >>>>>>> [ 0.421257] pci 0000:00:06.0: quirk: region 8000-803f claimed by >>>>>>> ali7101 ACPI >>>>>>> [ 0.421261] pci 0000:00:06.0: quirk: region 8040-805f claimed by >>>>>>> ali7101 SMB >>>>>>> [ 0.421340] PCI: 0000:00:0a.0 reg 10 32bit mmio: [e0402000, e0402fff] >>>>>>> [ 0.421352] pci 0000:00:0a.0: supports D1 >>>>>>> [ 0.421354] pci 0000:00:0a.0: supports D2 >>>>>>> [ 0.421356] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold >>>>>>> [ 0.421360] pci 0000:00:0a.0: PME# disabled >>>>>>> [ 0.421385] PCI: 0000:00:0a.1 reg 10 32bit mmio: [e0403000, e0403fff] >>>>>>> [ 0.421397] pci 0000:00:0a.1: supports D1 >>>>>>> [ 0.421399] pci 0000:00:0a.1: supports D2 >>>>>>> [ 0.421401] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold >>>>>>> [ 0.421405] pci 0000:00:0a.1: PME# disabled >>>>>>> [ 0.421427] PCI: 0000:00:0a.2 reg 10 32bit mmio: [e0404000, e04047ff] >>>>>>> [ 0.421459] pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold >>>>>>> [ 0.421464] pci 0000:00:0a.2: PME# disabled >>>>>>> [ 0.421505] PCI: 0000:00:0c.0 reg 20 io port: [8080, 809f] >>>>>>> [ 0.421523] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold >>>>>>> [ 0.421527] pci 0000:00:0c.0: PME# disabled >>>>>>> [ 0.421561] PCI: 0000:00:0c.1 reg 20 io port: [80a0, 80bf] >>>>>>> [ 0.421581] pci 0000:00:0c.1: PME# supported from D0 D3hot D3cold >>>>>>> [ 0.421585] pci 0000:00:0c.1: PME# disabled >>>>>>> [ 0.421607] PCI: 0000:00:0c.2 reg 10 32bit mmio: [e0404800, e04048ff] >>>>>>> [ 0.421639] pci 0000:00:0c.2: PME# supported from D0 D3hot D3cold >>>>>>> [ 0.421643] pci 0000:00:0c.2: PME# disabled >>>>>>> [ 0.421682] PCI: 0000:00:0f.0 reg 20 io port: [80c0, 80cf] >>>>>>> [ 0.421724] PCI: 0000:00:12.0 reg 10 io port: [9c00, 9cff] >>>>>>> [ 0.421731] PCI: 0000:00:12.0 reg 14 32bit mmio: [e0404c00, e0404dff] >>>>>>> [ 0.421760] pci 0000:00:12.0: supports D1 >>>>>>> [ 0.421761] pci 0000:00:12.0: supports D2 >>>>>>> [ 0.421764] pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold >>>>>>> [ 0.421768] pci 0000:00:12.0: PME# disabled >>>>>>> [ 0.421815] PCI: 0000:01:05.0 reg 10 32bit mmio: [f0000000, f7ffffff] >>>>>>> [ 0.421821] PCI: 0000:01:05.0 reg 14 io port: [a000, a0ff] >>>>>>> [ 0.421827] PCI: 0000:01:05.0 reg 18 32bit mmio: [e0500000, e050ffff] >>>>>>> [ 0.421843] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff] >>>>>>> [ 0.421857] pci 0000:01:05.0: supports D1 >>>>>>> [ 0.421858] pci 0000:01:05.0: supports D2 >>>>>>> [ 0.421885] PCI: bridge 0000:00:01.0 io port: [a000, afff] >>>>>>> [ 0.421889] PCI: bridge 0000:00:01.0 32bit mmio: [e0500000, e05fffff] >>>>>>> [ 0.421894] PCI: bridge 0000:00:01.0 32bit mmio pref: [f0000000, >>>>>>> f7ffffff] >>>>>>> [ 0.421923] bus 00 -> node 0 >>>>>>> [ 0.421933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>>>>> [ 0.422053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT] >>>>>>> [ 0.425764] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11) >>>>>>> *0, disabled. >>>>>>> [ 0.425986] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11) >>>>>>> [ 0.426202] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 *11) >>>>>>> [ 0.426422] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11) >>>>>>> *0, disabled. >>>>>>> [ 0.426639] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 *10 11) >>>>>>> [ 0.426858] ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11 >>>>>>> [ 0.427073] ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 *11) >>>>>>> [ 0.427291] ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 *11) >>>>>>> [ 0.427508] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 11) >>>>>>> *0, disabled. >>>>>>> [ 0.427785] Linux Plug and Play Support v0.97 (c) Adam Belay >>>>>>> [ 0.427844] pnp: PnP ACPI init >>>>>>> [ 0.427859] ACPI: bus type pnp registered >>>>>>> [ 0.436388] pnp: PnP ACPI: found 12 devices >>>>>>> [ 0.436392] ACPI: ACPI bus type pnp unregistered >>>>>>> [ 0.436399] PnPBIOS: Disabled by ACPI PNP >>>>>>> [ 0.440333] PCI: Using ACPI for IRQ routing >>>>>>> [ 0.440499] NET: Registered protocol family 8 >>>>>>> [ 0.440499] NET: Registered protocol family 20 >>>>>>> [ 0.440499] NetLabel: Initializing >>>>>>> [ 0.440499] NetLabel: domain hash size = 128 >>>>>>> [ 0.440499] NetLabel: protocols = UNLABELED CIPSOv4 >>>>>>> [ 0.440499] NetLabel: unlabeled traffic allowed by default >>>>>>> [ 0.440499] tracer: 772 pages allocated for 65536 entries of 48 bytes >>>>>>> [ 0.440499] actual entries 65620 >>>>>>> [ 0.440770] AppArmor: AppArmor Filesystem Enabled >>>>>>> [ 0.440791] ACPI: RTC can wake from S4 >>>>>>> [ 0.440811] system 00:05: ioport range 0x40b-0x40b has been reserved >>>>>>> [ 0.440811] system 00:05: ioport range 0x480-0x48f has been reserved >>>>>>> [ 0.440811] system 00:05: ioport range 0x4d0-0x4d1 has been reserved >>>>>>> [ 0.440811] system 00:05: ioport range 0x4d6-0x4d6 has been reserved >>>>>>> [ 0.440811] system 00:05: ioport range 0x8000-0x807f could not be >>>>>>> reserved >>>>>>> [ 0.440811] system 00:05: ioport range 0xfe00-0xfe01 has been reserved >>>>>>> [ 0.440811] system 00:05: ioport range 0xfe10-0xfe11 has been reserved >>>>>>> [ 0.440811] system 00:06: iomem range 0x0-0x9ffff could not be reserved >>>>>>> [ 0.440811] system 00:06: iomem range 0xdc000-0xdffff could not be >>>>>>> reserved >>>>>>> [ 0.440811] system 00:06: iomem range 0xe0000-0xfffff could not be >>>>>>> reserved >>>>>>> [ 0.440811] system 00:06: iomem range 0x100000-0x1bffffff could not >>>>>>> be reserved >>>>>>> [ 0.440811] system 00:06: iomem range 0xfff80000-0xffffffff could >>>>>>> not be reserved >>>>>>> [ 0.440811] system 00:06: iomem range 0xe0800000-0xe0800fff has been >>>>>>> reserved >>>>>>> [ 0.476831] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 >>>>>>> [ 0.476836] pci 0000:00:01.0: IO window: 0xa000-0xafff >>>>>>> [ 0.476841] pci 0000:00:01.0: MEM window: 0xe0500000-0xe05fffff >>>>>>> [ 0.476845] pci 0000:00:01.0: PREFETCH window: >>>>>>> 0x000000f0000000-0x000000f7ffffff >>>>>>> [ 0.476852] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 >>>>>>> [ 0.476854] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff >>>>>>> [ 0.476858] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff >>>>>>> [ 0.476863] pci 0000:00:0a.0: PREFETCH window: 0x30000000-0x33ffffff >>>>>>> [ 0.476867] pci 0000:00:0a.0: MEM window: 0x34000000-0x37ffffff >>>>>>> [ 0.476871] pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06 >>>>>>> [ 0.476874] pci 0000:00:0a.1: IO window: 0x001800-0x0018ff >>>>>>> [ 0.476878] pci 0000:00:0a.1: IO window: 0x001c00-0x001cff >>>>>>> [ 0.476882] pci 0000:00:0a.1: PREFETCH window: 0x38000000-0x3bffffff >>>>>>> [ 0.476887] pci 0000:00:0a.1: MEM window: 0x3c000000-0x3fffffff >>>>>>> [ 0.477258] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 >>>>>>> [ 0.477263] PCI: setting IRQ 11 as level-triggered >>>>>>> [ 0.477268] pci 0000:00:0a.0: PCI INT A -> Link[LNK2] -> GSI 11 >>>>>>> (level, low) -> IRQ 11 >>>>>>> [ 0.477540] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10 >>>>>>> [ 0.477543] PCI: setting IRQ 10 as level-triggered >>>>>>> [ 0.477548] pci 0000:00:0a.1: PCI INT B -> Link[LNK4] -> GSI 10 >>>>>>> (level, low) -> IRQ 10 >>>>>>> [ 0.477554] bus: 00 index 0 io port: [0, ffff] >>>>>>> [ 0.477556] bus: 00 index 1 mmio: [0, ffffffff] >>>>>>> [ 0.477559] bus: 01 index 0 io port: [a000, afff] >>>>>>> [ 0.477562] bus: 01 index 1 mmio: [e0500000, e05fffff] >>>>>>> [ 0.477564] bus: 01 index 2 mmio: [f0000000, f7ffffff] >>>>>>> [ 0.477567] bus: 01 index 3 mmio: [0, 0] >>>>>>> [ 0.477569] bus: 02 index 0 io port: [1000, 10ff] >>>>>>> [ 0.477572] bus: 02 index 1 io port: [1400, 14ff] >>>>>>> [ 0.477574] bus: 02 index 2 mmio: [30000000, 33ffffff] >>>>>>> [ 0.477577] bus: 02 index 3 mmio: [34000000, 37ffffff] >>>>>>> [ 0.477579] bus: 06 index 0 io port: [1800, 18ff] >>>>>>> [ 0.477582] bus: 06 index 1 io port: [1c00, 1cff] >>>>>>> [ 0.477584] bus: 06 index 2 mmio: [38000000, 3bffffff] >>>>>>> [ 0.477587] bus: 06 index 3 mmio: [3c000000, 3fffffff] >>>>>>> [ 0.477610] NET: Registered protocol family 2 >>>>>>> [ 0.477849] IP route cache hash table entries: 4096 (order: 2, 16384 >>>>>>> bytes) >>>>>>> [ 0.478188] TCP established hash table entries: 16384 (order: 5, >>>>>>> 131072 bytes) >>>>>>> [ 0.478315] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) >>>>>>> [ 0.478430] TCP: Hash tables configured (established 16384 bind 16384) >>>>>>> [ 0.478434] TCP reno registered >>>>>>> [ 0.478576] NET: Registered protocol family 1 >>>>>>> [ 0.478749] checking if image is initramfs... it is >>>>>>> [ 0.980128] Switched to high resolution mode on CPU 0 >>>>>>> [ 1.236336] Freeing initrd memory: 7988k freed >>>>>>> [ 1.236740] Simple Boot Flag at 0x35 set to 0x1 >>>>>>> [ 1.237409] audit: initializing netlink socket (disabled) >>>>>>> [ 1.237447] type=2000 audit(1228361770.236:1): initialized >>>>>>> [ 1.242678] HugeTLB registered 4 MB page size, pre-allocated 0 pages >>>>>>> [ 1.245896] VFS: Disk quotas dquot_6.5.1 >>>>>>> [ 1.246053] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>>>>>> [ 1.246214] msgmni has been set to 875 >>>>>>> [ 1.246406] io scheduler noop registered >>>>>>> [ 1.246410] io scheduler anticipatory registered >>>>>>> [ 1.246413] io scheduler deadline registered >>>>>>> [ 1.246435] io scheduler cfq registered (default) >>>>>>> [ 1.246492] pci 0000:00:07.0: Activating ISA DMA hang workarounds >>>>>>> [ 1.246559] pci 0000:01:05.0: Boot video device >>>>>>> [ 1.247102] isapnp: Scanning for PnP cards... >>>>>>> [ 1.601376] isapnp: No Plug & Play device found >>>>>>> [ 1.670035] Serial: 8250/16550 driver4 ports, IRQ sharing enabled >>>>>>> [ 1.670179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550 >>>>>>> [ 1.671493] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 11 >>>>>>> [ 1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> GSI 11 >>>>>>> (level, low) -> IRQ 11 >>>>>>> [ 1.671508] serial 0000:00:03.0: PCI INT A disabled >>>>>>> [ 1.674033] brd: module loaded >>>>>>> [ 1.674149] input: Macintosh mouse button emulation as >>>>>>> /devices/virtual/input/input0 >>>>>>> [ 1.674355] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at >>>>>>> 0x60,0x64 irq 1,12 >>>>>>> [ 1.678060] serio: i8042 KBD port at 0x60,0x64 irq 1 >>>>>>> [ 1.678070] serio: i8042 AUX port at 0x60,0x64 irq 12 >>>>>>> [ 1.678734] mice: PS/2 mouse device common for all mice >>>>>>> [ 1.678989] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 >>>>>>> [ 1.679020] rtc0: alarms up to one month, y3k >>>>>>> [ 1.679231] EISA: Probing bus 0 at eisa.0 >>>>>>> [ 1.679243] Cannot allocate resource for EISA slot 1 >>>>>>> [ 1.679271] Cannot allocate resource for EISA slot 8 >>>>>>> [ 1.679274] EISA: Detected 0 cards. >>>>>>> [ 1.679279] cpuidle: using governor ladder >>>>>>> [ 1.679282] cpuidle: using governor menu >>>>>>> [ 1.679972] TCP cubic registered >>>>>>> [ 1.680063] Using IPI No-Shortcut mode >>>>>>> [ 1.680487] registered taskstats version 1 >>>>>>> [ 1.680625] Magic number: 4:233:613 >>>>>>> [ 1.680643] isa: hash matches >>>>>>> [ 1.680721] tty ptye3: hash matches >>>>>>> [ 1.680820] pci 0000:00:0a.0: hash matches >>>>>>> [ 1.680896] rtc_cmos 00:02: setting system clock to 2008-12-04 >>>>>>> 03:36:11 UTC (1228361771) >>>>>>> [ 1.680901] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >>>>>>> [ 1.680903] EDD information not available. >>>>>>> [ 1.681786] Freeing unused kernel memory: 424k freed >>>>>>> [ 1.681848] Write protecting the kernel text: 2576k >>>>>>> [ 1.681884] Write protecting the kernel read-only data: 936k >>>>>>> [ 1.712227] input: AT Translated Set 2 keyboard as >>>>>>> /devices/platform/i8042/serio0/input/input1 >>>>>>> [ 1.916830] fuse init (API version 7.9) >>>>>>> [ 2.153320] ACPI: CPU0 (power states: C1[C1] C2[C2]) >>>>>>> [ 2.158379] processor ACPI0007:00: registered as cooling_device0 >>>>>>> [ 2.158385] ACPI: Processor [CPU0] (supports 8 throttling states) >>>>>>> [ 2.186683] thermal LNXTHERM:01: registered as thermal_zone0 >>>>>>> [ 2.195703] ACPI: Thermal Zone [TZ01] (39 C) >>>>>>> [ 3.435666] usbcore: registered new interface driver usbfs >>>>>>> [ 3.435708] usbcore: registered new interface driver hub >>>>>>> [ 3.449846] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10 >>>>>>> [ 3.449854] ohci1394 0000:00:0a.2: PCI INT C -> Link[LNK5] -> GSI >>>>>>> 10 (level, low) -> IRQ 10 >>>>>>> [ 3.502708] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] >>>>>>> MMIO=[e0404000-e04047ff] Max Packet=[2048] IR/IT contexts=[4/4] >>>>>>> [ 3.522828] usbcore: registered new device driver usb >>>>>>> [ 3.529450] No dock devices found. >>>>>>> [ 3.558303] SCSI subsystem initialized >>>>>>> [ 3.573485] USB Universal Host Controller Interface driver v3.0 >>>>>>> [ 3.577306] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) >>>>>>> [ 3.641823] libata version 3.00 loaded. >>>>>>> [ 3.685077] uhci_hcd 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI >>>>>>> 11 (level, low) -> IRQ 11 >>>>>>> [ 3.685094] uhci_hcd 0000:00:0c.0: UHCI Host Controller >>>>>>> [ 3.685194] uhci_hcd 0000:00:0c.0: new USB bus registered, assigned >>>>>>> bus number 1 >>>>>>> [ 3.685226] uhci_hcd 0000:00:0c.0: irq 11, io base 0x00008080 >>>>>>> [ 3.685520] usb usb1: configuration #1 chosen from 1 choice >>>>>>> [ 3.685559] hub 1-0:1.0: USB hub found >>>>>>> [ 3.685577] hub 1-0:1.0: 2 ports detected >>>>>>> [ 3.892711] uhci_hcd 0000:00:0c.1: PCI INT B -> Link[LNK4] -> GSI >>>>>>> 10 (level, low) -> IRQ 10 >>>>>>> [ 3.892729] uhci_hcd 0000:00:0c.1: UHCI Host Controller >>>>>>> [ 3.892769] uhci_hcd 0000:00:0c.1: new USB bus registered, assigned >>>>>>> bus number 2 >>>>>>> [ 3.892800] uhci_hcd 0000:00:0c.1: irq 10, io base 0x000080a0 >>>>>>> [ 3.892977] usb usb2: configuration #1 chosen from 1 choice >>>>>>> [ 3.893015] hub 2-0:1.0: USB hub found >>>>>>> [ 3.893030] hub 2-0:1.0: 2 ports detected >>>>>>> [ 4.100720] ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNK5] -> GSI >>>>>>> 10 (level, low) -> IRQ 10 >>>>>>> [ 4.100748] ehci_hcd 0000:00:0c.2: EHCI Host Controller >>>>>>> [ 4.100790] ehci_hcd 0000:00:0c.2: new USB bus registered, assigned >>>>>>> bus number 3 >>>>>>> [ 4.100848] ehci_hcd 0000:00:0c.2: irq 10, io mem 0xe0404800 >>>>>>> [ 4.112096] ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95, >>>>>>> driver 10 Dec 2004 >>>>>>> [ 4.112430] usb usb3: configuration #1 chosen from 1 choice >>>>>>> [ 4.112470] hub 3-0:1.0: USB hub found >>>>>>> [ 4.112485] hub 3-0:1.0: 4 ports detected >>>>>>> [ 4.321310] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10) is not >>>>>>> an 8139C+ compatible chip >>>>>>> [ 4.321317] 8139cp 0000:00:12.0: Try the "8139too" driver instead. >>>>>>> [ 4.327282] 8139too Fast Ethernet driver 0.9.28 >>>>>>> [ 4.327690] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 >>>>>>> [ 4.327696] 8139too 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 11 >>>>>>> (level, low) -> IRQ 11 >>>>>>> [ 4.328388] eth0: RealTek RTL8139 at 0x9c00, 08:00:46:c1:2f:38, IRQ 11 >>>>>>> [ 4.328391] eth0: Identified 8139 chip type 'RTL-8100B/8139D' >>>>>>> [ 4.333699] pata_ali 0000:00:0f.0: can't derive routing for PCI INT A >>>>>>> [ 4.334315] scsi0 : pata_ali >>>>>>> [ 4.334514] scsi1 : pata_ali >>>>>>> [ 4.335705] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x80c0 >>>>>>> irq 14 >>>>>>> [ 4.335709] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x80c8 >>>>>>> irq 15 >>>>>>> [ 4.436137] usb 3-3: new high speed USB device using ehci_hcd and >>>>>>> address 2 >>>>>>> [ 4.496480] ata1.00: ATA-5: HITACHI_DK23FA-60, 00M4A0A1, max UDMA/100 >>>>>>> [ 4.496486] ata1.00: 117210240 sectors, multi 16: LBA >>>>>>> [ 4.504392] ata1.00: configured for UDMA/100 >>>>>>> [ 4.570936] usb 3-3: configuration #1 chosen from 1 choice >>>>>>> [ 4.668513] ata2.00: ATAPI: SONY DVD RW DW-U50A, 1.5d, max UDMA/33 >>>>>>> [ 4.668530] ata2.00: WARNING: ATAPI DMA disabled for reliablity >>>>>>> issues. It can be enabled >>>>>>> [ 4.668534] ata2.00: WARNING: via pata_ali.atapi_dma modparam or >>>>>>> corresponding sysfs node. >>>>>>> [ 4.684549] ata2.00: configured for UDMA/33 >>>>>>> [ 4.684800] scsi 0:0:0:0: Direct-Access ATA >>>>>>> HITACHI_DK23FA-6 00M4 PQ: 0 ANSI: 5 >>>>>>> [ 4.689907] scsi 1:0:0:0: CD-ROM SONY DVD RW DW-U50A >>>>>>> 1.5d PQ: 0 ANSI: 5 >>>>>>> [ 4.875853] scsi 0:0:0:0: Attached scsi generic sg0 type 0 >>>>>>> [ 4.875909] scsi 1:0:0:0: Attached scsi generic sg1 type 5 >>>>>>> [ 4.905017] usbcore: registered new interface driver libusual >>>>>>> [ 4.915604] Initializing USB Mass Storage driver... >>>>>>> [ 4.926183] scsi2 : SCSI emulation for USB Mass Storage devices >>>>>>> [ 4.930846] Driver 'sd' needs updating - please use bus_type methods >>>>>>> [ 4.931041] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors >>>>>>> (60012 MB) >>>>>>> [ 4.931071] sd 0:0:0:0: [sda] Write Protect is off >>>>>>> [ 4.931074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>>> [ 4.931121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>>>>> enabled, doesn't support DPO or FUA >>>>>>> [ 4.931230] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors >>>>>>> (60012 MB) >>>>>>> [ 4.931256] sd 0:0:0:0: [sda] Write Protect is off >>>>>>> [ 4.931260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>>> [ 4.931305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>>>>> enabled, doesn't support DPO or FUA >>>>>>> [ 4.931312] sda:<6>usbcore: registered new interface driver >>>>>>> usb-storage >>>>>>> [ 4.933380] USB Mass Storage support registered. >>>>>>> [ 4.933587] usb-storage: device found at 2 >>>>>>> [ 4.933590] usb-storage: waiting for device to settle before scanning >>>>>>> [ 4.954192] Driver 'sr' needs updating - please use bus_type methods >>>>>>> [ 4.956254] ieee1394: Host added: ID:BUS[0-00:1023] >>>>>>> GUID[080046030188cd58] >>>>>>> [ 4.976443] Marking TSC unstable due to TSC halts in idle >>>>>>> [ 4.981461] sda1 sda2 < sda5 sda6 sda7 sda8 > >>>>>>> [ 5.060309] sd 0:0:0:0: [sda] Attached SCSI disk >>>>>>> [ 5.078879] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda >>>>>>> tray >>>>>>> [ 5.078888] Uniform CD-ROM driver Revision: 3.20 >>>>>>> [ 5.079060] sr 1:0:0:0: Attached scsi CD-ROM sr0 >>>>>>> [ 5.525816] PM: Starting manual resume from disk >>>>>>> [ 5.525824] PM: Resume from partition 8:6 >>>>>>> [ 5.525826] PM: Checking hibernation image. >>>>>>> [ 5.526062] PM: Resume from disk failed. >>>>>>> [ 5.604150] kjournald starting. Commit interval 5 seconds >>>>>>> [ 5.604179] EXT3-fs: mounted filesystem with ordered data mode. >>>>>>> [ 9.932309] usb-storage: device scan complete >>>>>>> [ 9.933393] scsi 2:0:0:0: Direct-Access USB2.0 Mobile Disk >>>>>>> 1.00 PQ: 0 ANSI: 2 >>>>>>> [ 9.934990] sd 2:0:0:0: [sdb] 4030463 512-byte hardware sectors (2064 >>>>>>> MB) >>>>>>> [ 9.935864] sd 2:0:0:0: [sdb] Write Protect is off >>>>>>> [ 9.935867] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 >>>>>>> [ 9.935871] sd 2:0:0:0: [sdb] Assuming drive cache: write through >>>>>>> [ 9.938722] sd 2:0:0:0: [sdb] 4030463 512-byte hardware sectors (2064 >>>>>>> MB) >>>>>>> [ 9.939596] sd 2:0:0:0: [sdb] Write Protect is off >>>>>>> [ 9.939599] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 >>>>>>> [ 9.939602] sd 2:0:0:0: [sdb] Assuming drive cache: write through >>>>>>> [ 9.939609] sdb: sdb1 >>>>>>> [ 10.048277] sd 2:0:0:0: [sdb] Attached SCSI removable disk >>>>>>> [ 10.048598] sd 2:0:0:0: Attached scsi generic sg2 type 0 >>>>>>> [ 13.037997] udevd version 124 started >>>>>>> [ 13.699612] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>>>>>> [ 13.774796] shpchp: Standard Hot Plug PCI Controller Driver version: >>>>>>> 0.4 >>>>>>> [ 13.843248] Linux agpgart interface v0.103 >>>>>>> [ 13.891353] agpgart-ati 0000:00:00.0: Ati IGP345M chipset >>>>>>> [ 13.961486] agpgart-ati 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 >>>>>>> [ 14.388428] Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8158] >>>>>>> [ 14.458941] ACPI: AC Adapter [ACAD] (on-line) >>>>>>> [ 14.516681] Yenta: ISA IRQ mask 0x00a8, PCI irq 11 >>>>>>> [ 14.516687] Socket status: 30000006 >>>>>>> [ 14.517213] input: Power Button (FF) as >>>>>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 >>>>>>> [ 14.528123] ACPI: Power Button (FF) [PWRF] >>>>>>> [ 14.528426] input: Power Button (CM) as >>>>>>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 >>>>>>> [ 14.544105] ACPI: Power Button (CM) [PBTN] >>>>>>> [ 14.544448] input: Lid Switch as >>>>>>> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 >>>>>>> [ 14.544632] ACPI: Lid Switch [LID] >>>>>>> [ 14.563247] Yenta: CardBus bridge found at 0000:00:0a.1 [104d:8158] >>>>>>> [ 14.692359] Yenta: ISA IRQ mask 0x00a8, PCI irq 10 >>>>>>> [ 14.692364] Socket status: 30000006 >>>>>>> [ 14.694501] ACPI: EC: non-query interrupt received, switching to >>>>>>> interrupt mode >>>>>>> [ 14.698825] ali15x3_smbus 0000:00:06.0: ALI15X3_smb region >>>>>>> uninitialized - upgrade BIOS or use force_addr=0xaddr >>>>>>> [ 14.698834] ali15x3_smbus 0000:00:06.0: ALI15X3 not detected, >>>>>>> module not inserted. >>>>>>> [ 14.904580] ACPI: Battery Slot [BAT1] (battery present) >>>>>>> [ 15.944450] sony-laptop: Sony Notebook Control Driver v0.6. >>>>>>> [ 15.971330] input: Sony Vaio Keys as >>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/SNY5001:00/input/input5 >>>>>>> [ 15.984278] input: Sony Vaio Jogdial as /devices/virtual/input/input6 >>>>>>> [ 16.158529] input: Video Bus as >>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0a/device:0b/input/input7 >>>>>>> [ 16.172136] ACPI: Video Device [VGA] (multi-head: yes rom: no post: >>>>>>> no) >>>>>>> [ 16.183661] parport_pc 00:0a: reported by Plug and Play ACPI >>>>>>> [ 16.183770] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 >>>>>>> [PCSPP,TRISTATE,COMPAT,ECP,DMA] >>>>>>> [ 16.216264] ALI 5451 0000:00:04.0: power state changed by ACPI to D0 >>>>>>> [ 16.216633] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11 >>>>>>> [ 16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI >>>>>>> 11 (level, low) -> IRQ 11 >>>>>>> [ 16.909332] input: PC Speaker as /devices/platform/pcspkr/input/input8 >>>>>>> [ 17.267206] input: PS/2 Mouse as >>>>>>> /devices/platform/i8042/serio1/input/input9 >>>>>>> [ 17.325731] input: AlpsPS/2 ALPS GlidePoint as >>>>>>> /devices/platform/i8042/serio1/input/input10 >>>>>>> [ 20.223118] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 >>>>>>> 0x220-0x22f 0x330-0x337 0x388-0x38f >>>>>>> [ 20.225384] cs: IO port probe 0x3e0-0x4ff: clean. >>>>>>> [ 20.226259] cs: IO port probe 0x820-0x8ff: clean. >>>>>>> [ 20.227243] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 >>>>>>> 0x220-0x22f 0x330-0x337 0x388-0x38f >>>>>>> [ 20.229477] cs: IO port probe 0x3e0-0x4ff: clean. >>>>>>> [ 20.230351] cs: IO port probe 0x820-0x8ff: clean. >>>>>>> [ 20.231207] cs: IO port probe 0xc00-0xcf7: clean. >>>>>>> [ 20.232294] cs: IO port probe 0xa00-0xaff: clean. >>>>>>> [ 20.234039] cs: IO port probe 0xc00-0xcf7: clean. >>>>>>> [ 20.235080] cs: IO port probe 0xa00-0xaff: clean. >>>>>>> [ 20.848038] AC'97 1 does not respond - RESET >>>>>>> [ 20.864038] AC'97 1 access is not valid [0xffffffff], removing mixer. >>>>>>> [ 20.864048] ali mixer 1 creating error. >>>>>>> [ 22.042820] lp0: using parport0 (interrupt-driven). >>>>>>> [ 22.270522] Adding 1253028k swap on /dev/sda6. Priority:-1 >>>>>>> extents:1 across:1253028k >>>>>>> [ 22.848407] EXT3 FS on sda5, internal journal >>>>>>> [ 24.167105] type=1505 audit(1228349194.280:2): >>>>>>> operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" >>>>>>> name2="default" pid=4076 >>>>>>> [ 24.390331] type=1505 audit(1228349194.504:3): >>>>>>> operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" >>>>>>> name2="default" pid=4081 >>>>>>> [ 24.390845] type=1505 audit(1228349194.504:4): >>>>>>> operation="profile_load" name="/usr/sbin/cupsd" name2="default" >>>>>>> pid=4081 >>>>>>> [ 24.572943] ip_tables: (C) 2000-2006 Netfilter Core Team >>>>>>> [ 25.424608] ACPI: WMI: Mapper loaded >>>>>>> [ 26.678424] warning: `avahi-daemon' uses 32-bit capabilities >>>>>>> (legacy support in use) >>>>>>> [ 26.744141] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) >>>>>>> [ 26.744152] apm: overridden by ACPI. >>>>>>> [ 26.974597] ppdev: user-space parallel port driver >>>>>>> [ 27.370850] sonypi: Sony Programmable I/O Controller Driver v1.26. >>>>>>> [ 27.373115] sonypi: please try the sony-laptop module instead and >>>>>>> report failures, see also >>>>>>> http://www.linux.it/~malattia/wiki/index.php/Sony_drivers >>>>>>> [ 27.376122] sonypi: detected type2 model, verbose = 0, fnkeyinit = >>>>>>> off, camera = off, compat = off, mask = 0xffffffff, useinput = on, >>>>>>> acpi = on >>>>>>> [ 27.376136] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 >>>>>>> [ 27.376139] sonypi: device allocated minor is 60 >>>>>>> [ 27.381187] input: Sony Vaio Jogdial as >>>>>>> /devices/platform/sonypi/input/input11 >>>>>>> [ 27.412392] input: Sony Vaio Keys as >>>>>>> /devices/platform/sonypi/input/input12 >>>>>>> [ 27.485856] sonypi command failed at >>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1 (line >>>>>>> 653) >>>>>>> [ 27.529505] sonypi command failed at >>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2 (line >>>>>>> 664) >>>>>>> [ 27.573141] sonypi command failed at >>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2 (line >>>>>>> 666) >>>>>>> [ 27.616781] sonypi command failed at >>>>>>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1 (line >>>>>>> 653) >>>>>>> [ 29.719152] Bluetooth: Core ver 2.13 >>>>>>> [ 29.722230] NET: Registered protocol family 31 >>>>>>> [ 29.722240] Bluetooth: HCI device and connection manager initialized >>>>>>> [ 29.722246] Bluetooth: HCI socket layer initialized >>>>>>> [ 29.747817] Bluetooth: L2CAP ver 2.11 >>>>>>> [ 29.747828] Bluetooth: L2CAP socket layer initialized >>>>>>> [ 29.775634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >>>>>>> [ 29.775643] Bluetooth: BNEP filters: protocol multicast >>>>>>> [ 29.798271] Bluetooth: RFCOMM socket layer initialized >>>>>>> [ 29.798654] Bluetooth: RFCOMM TTY layer initialized >>>>>>> [ 29.798663] Bluetooth: RFCOMM ver 1.10 >>>>>>> [ 29.829262] Bridge firewalling registered >>>>>>> [ 29.830471] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM >>>>>>> feature. >>>>>>> [ 29.848436] Bluetooth: SCO (Voice Link) ver 0.6 >>>>>>> [ 29.848468] Bluetooth: SCO socket layer initialized >>>>>>> [ 31.798487] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 >>>>>>> [ 31.798514] pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 >>>>>>> (level, low) -> IRQ 10 >>>>>>> [ 32.045868] [drm] Initialized drm 1.1.0 20060810 >>>>>>> [ 32.065087] [drm] Initialized radeon 1.29.0 20080528 on minor 0 >>>>>>> [ 32.408164] agpgart-ati 0000:00:00.0: AGP 2.0 bridge >>>>>>> [ 32.408203] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x >>>>>>> mode >>>>>>> [ 32.408255] pci 0000:01:05.0: putting AGP V2 device into 4x mode >>>>>>> [ 32.559341] [drm] Setting GART location based on new memory map >>>>>>> [ 32.559362] [drm] Loading R100 Microcode >>>>>>> [ 32.559410] [drm] writeback test succeeded in 1 usecs >>>>>>> [ 33.960725] eth0: link down >>>>>>> [ 133.708158] ppdev0: registered pardevice >>>>>>> [ 133.756068] ppdev0: unregistered pardevice >>>>>>> [ 135.520452] ppdev0: registered pardevice >>>>>>> [ 135.568396] ppdev0: unregistered pardevice >>>>>>> [ 135.796362] type=1503 audit(1228349305.912:5): >>>>>>> operation="inode_permission" requested_mask="r::" denied_mask="r::" >>>>>>> fsuid=7 name="/proc/5785/net/" pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.906488] NET: Registered protocol family 10 >>>>>>> [ 135.908629] lo: Disabled Privacy Extensions >>>>>>> [ 135.910608] ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>>>> [ 135.913224] type=1503 audit(1228349306.028:6): >>>>>>> operation="socket_create" family="ax25" sock_type="dgram" protocol=0 >>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.913252] type=1503 audit(1228349306.028:7): >>>>>>> operation="socket_create" family="netrom" sock_type="seqpacket" >>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.913261] type=1503 audit(1228349306.028:8): >>>>>>> operation="socket_create" family="rose" sock_type="dgram" protocol=0 >>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.913268] type=1503 audit(1228349306.028:9): >>>>>>> operation="socket_create" family="ipx" sock_type="dgram" protocol=0 >>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.913275] type=1503 audit(1228349306.028:10): >>>>>>> operation="socket_create" family="appletalk" sock_type="dgram" >>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.913282] type=1503 audit(1228349306.028:11): >>>>>>> operation="socket_create" family="econet" sock_type="dgram" protocol=0 >>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.913289] type=1503 audit(1228349306.028:12): >>>>>>> operation="socket_create" family="ash" sock_type="dgram" protocol=0 >>>>>>> pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.913296] type=1503 audit(1228349306.028:13): >>>>>>> operation="socket_create" family="x25" sock_type="seqpacket" >>>>>>> protocol=0 pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.913425] type=1503 audit(1228349306.028:14): >>>>>>> operation="inode_permission" requested_mask="::r" denied_mask="::r" >>>>>>> fsuid=7 name="/proc/5785/net/dev" pid=5785 profile="/usr/sbin/cupsd" >>>>>>> [ 135.939426] ppdev0: registered pardevice >>>>>>> [ 135.988553] ppdev0: unregistered pardevice >>>>>>> >>>>>>> Module Size Used by >>>>>>> ipv6 263972 8 >>>>>>> nls_iso8859_1 12032 1 >>>>>>> nls_cp437 13696 1 >>>>>>> vfat 18816 1 >>>>>>> fat 57376 1 vfat >>>>>>> binfmt_misc 16904 1 >>>>>>> radeon 147616 2 >>>>>>> drm 86056 3 radeon >>>>>>> sco 18308 2 >>>>>>> bridge 56980 0 >>>>>>> stp 10628 1 bridge >>>>>>> rfcomm 44432 0 >>>>>>> bnep 20480 2 >>>>>>> l2cap 30464 6 rfcomm,bnep >>>>>>> bluetooth 61924 6 sco,rfcomm,bnep,l2cap >>>>>>> sonypi 26648 0 >>>>>>> ppdev 15620 0 >>>>>>> speedstep_lib 12676 0 >>>>>>> cpufreq_userspace 11396 0 >>>>>>> cpufreq_ondemand 14988 0 >>>>>>> cpufreq_stats 13188 0 >>>>>>> cpufreq_powersave 9856 0 >>>>>>> cpufreq_conservative 14600 0 >>>>>>> freq_table 12672 2 cpufreq_ondemand,cpufreq_stats >>>>>>> wmi 14504 0 >>>>>>> pci_slot 12552 0 >>>>>>> sbs 19464 0 >>>>>>> sbshc 13440 1 sbs >>>>>>> iptable_filter 10752 0 >>>>>>> ip_tables 19600 1 iptable_filter >>>>>>> x_tables 22916 1 ip_tables >>>>>>> sbp2 29324 0 >>>>>>> lp 17156 0 >>>>>>> joydev 18368 0 >>>>>>> pcmcia 43052 0 >>>>>>> evdev 17696 16 >>>>>>> psmouse 45200 0 >>>>>>> serio_raw 13444 0 >>>>>>> pcspkr 10624 0 >>>>>>> snd_ali5451 27532 3 >>>>>>> parport_pc 39204 1 >>>>>>> video 25104 0 >>>>>>> snd_ac97_codec 111652 1 snd_ali5451 >>>>>>> parport 42604 3 ppdev,lp,parport_pc >>>>>>> output 11008 1 video >>>>>>> ac97_bus 9856 1 snd_ac97_codec >>>>>>> snd_pcm_oss 46848 0 >>>>>>> sony_laptop 39004 0 >>>>>>> snd_mixer_oss 22784 1 snd_pcm_oss >>>>>>> snd_pcm 83204 3 snd_ali5451,snd_ac97_codec,snd_pcm_oss >>>>>>> snd_seq_dummy 10884 0 >>>>>>> container 11520 0 >>>>>>> snd_seq_oss 38528 0 >>>>>>> snd_seq_midi 14336 0 >>>>>>> i2c_ali1535 14340 0 >>>>>>> snd_rawmidi 29824 1 snd_seq_midi >>>>>>> snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi >>>>>>> i2c_ali15x3 14852 0 >>>>>>> battery 18436 0 >>>>>>> snd_seq 57776 6 >>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >>>>>>> button 14224 0 >>>>>>> ac 12292 0 >>>>>>> yenta_socket 31756 2 >>>>>>> snd_timer 29960 2 snd_pcm,snd_seq >>>>>>> snd_seq_device 15116 5 >>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >>>>>>> rsrc_nonstatic 19072 1 yenta_socket >>>>>>> i2c_core 31892 2 i2c_ali1535,i2c_ali15x3 >>>>>>> pcmcia_core 43412 3 pcmcia,yenta_socket,rsrc_nonstatic >>>>>>> snd 63268 16 >>>>>>> snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>>>>>> soundcore 15328 1 snd >>>>>>> snd_page_alloc 16136 1 snd_pcm >>>>>>> ati_agp 14988 1 >>>>>>> agpgart 42184 2 drm,ati_agp >>>>>>> shpchp 37908 0 >>>>>>> pci_hotplug 35236 1 shpchp >>>>>>> ext3 133256 1 >>>>>>> jbd 55444 1 ext3 >>>>>>> mbcache 16004 1 ext3 >>>>>>> sr_mod 22212 0 >>>>>>> cdrom 43168 1 sr_mod >>>>>>> sd_mod 42264 6 >>>>>>> crc_t10dif 9984 1 sd_mod >>>>>>> usb_storage 81728 1 >>>>>>> libusual 27156 1 usb_storage >>>>>>> sg 39732 0 >>>>>>> pata_acpi 12160 0 >>>>>>> pata_ali 16516 3 >>>>>>> 8139too 31616 0 >>>>>>> ata_generic 12932 0 >>>>>>> libata 177312 3 pata_acpi,pata_ali,ata_generic >>>>>>> 8139cp 27520 0 >>>>>>> uhci_hcd 30736 0 >>>>>>> ehci_hcd 43276 0 >>>>>>> mii 13440 2 8139too,8139cp >>>>>>> scsi_mod 155212 6 sbp2,sr_mod,sd_mod,usb_storage,sg,libata >>>>>>> dock 16656 1 libata >>>>>>> ohci1394 37936 0 >>>>>>> usbcore 148848 5 usb_storage,libusual,uhci_hcd,ehci_hcd >>>>>>> ieee1394 96324 2 sbp2,ohci1394 >>>>>>> thermal 23708 0 >>>>>>> processor 42156 2 thermal >>>>>>> fan 12548 0 >>>>>>> fbcon 47648 0 >>>>>>> tileblit 10880 1 fbcon >>>>>>> font 16512 1 fbcon >>>>>>> bitblit 13824 1 fbcon >>>>>>> softcursor 9984 1 bitblit >>>>>>> fuse 60828 5 >>>>>>> >>>>>>> ######################################################### >>>>>>> >>>>>>> I undrestand almost nothing this time! So, please help me. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Thank you. >>>>>>> >>>>>> >>>>> >>>> >>> >> >
