Re: Hooman Tadbiri, Iran, kernel 2.6.27-7-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you for the answer, but I can't find the SoftModem.txt file;
please tell me where to find it. Here I attached all the files
scanModem generated, please visit.
(+By the way this may help: I'm using an old Sony laptop computer)
Thanks,
Hooman.

On 12/4/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> Hooman,
>
> Following the instructions in SoftModem.txt
> run the modem disgnostics under Microsoft.
> It is desirable to first determine if your modem has a Conexant chip.
>
> MarvS
>
> On Wed, Dec 3, 2008 at 1:28 PM, Hooman Tadbiri <hooman.tadbiri@xxxxxxxxx>
> wrote:
>> To whom it may concern,
>>
>>
>> I had used scanModem several times on several computers and I have
>> never got such messages like these:
>>
>> ####################Linux Terminal####################
>> hooman@hooman-laptop:~/Desktop$ sudo ./scanModem
>>
>> [sudo] password for hooman:
>>
>> UPDATE=2008_11_06
>>
>> There are weekly updates of scanModem. Your copy is more than
>>
>> 4 weeks old!!
>>
>> If decisive guidance is not provided by this scanModem of 2008_11_06,
>>
>> download an update from http://linmodems.technion.ac.il
>>
>> Continuing in 10 seconds.
>>
>>
>>
>> Identifying PCI bus slots with candidate modems.
>>
>> Running PCIbus cases
>>
>> Analysing card in PCI bus 00:03.0, writing to scanout.00:03.0
>>
>> Please load the candidate driver slamr, with Admin/root command:
>>
>> sudo modprobe slamr
>>
>> Then rerun
>>
>> ./scanModem
>>
>> hooman@hooman-laptop:~/Desktop$ sudo modprobe slamr
>>
>> FATAL: Module slamr not found.
>> ####################ModemDate.txt####################
>>  Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
>> Server,
>>  as HTML can contain viruses. Use as the email Subject Line:
>>           YourName, YourCountry  kernel 2.6.27-7-generic
>>  With this Subject Line cogent experts will be alerted, and useful
>> case names left in the Archive.
>>  YourCountry will enable Country specific guidance. Linux experts in
>> YourCountry
>>  can be found through: http://www.linux.org/groups/index.html.
>> They will know your Country's modem code, which may be essential for
>> dialup service.
>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
>> Internet Provider mail filters.
>>  So in a day, also check the Archived responses at
>> http://www.linmodems.org
>> --------------------------  System information
>> ----------------------------
>> CPU=i686,
>> Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2
>> (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
>>  scanModem update of:  2008_11_06
>>
>>  There are no blacklisted modem drivers in /etc/modprobe*  files
>> Attached USB devices are:
>>  ID 126f:0163 TwinMOS
>>  ID 1d6b:0002 Linux Foundation 2.0 root hub
>>  ID 1d6b:0001 Linux Foundation 1.1 root hub
>>  ID 1d6b:0001 Linux Foundation 1.1 root hub
>>
>> USB modems not recognized
>>
>> For candidate card in slot 00:03.0, firmware information and bootup
>> diagnostics are:
>>  PCI slot PCI ID  SubsystemID Name
>>  ---------- --------- --------- --------------
>>  00:03.0 10b9:5457 104d:8158 Modem: ALi Corporation M5457 AC'97 Modem
>> Controller
>>
>>  Modem interrupt assignment and sharing:
>>  11:       1088    XT-PIC-XT        uhci_hcd:usb1, yenta, ALI 5451,
>> sonypi, eth0
>>  --- Bootup diagnostics for card in PCI slot 00:03.0 ----
>> [    0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000, e0400fff]
>> [    0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff]
>> [    0.421142] pci 0000:00:03.0: PME# supported from D3hot D3cold
>> [    0.421147] pci 0000:00:03.0: PME# disabled
>> [    1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> GSI 11
>> (level, low) -> IRQ 11
>> [    1.671508] serial 0000:00:03.0: PCI INT A disabled
>>
>>  The PCI slot 00:03.0 of the modem card may be disabled early in
>>  a bootup process,  but then enabled later. If modem drivers load
>>  but the  modem is not responsive, read DOCs/Bootup.txt about possible
>> fixes.
>>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>  if help is needed.
>>
>>
>> For candidate card in slot 00:04.0, firmware information and bootup
>> diagnostics are:
>>  PCI slot PCI ID  SubsystemID Name
>>  ---------- --------- --------- --------------
>>  00:04.0 10b9:5451 104d:8158 Multimedia audio controller: ALi
>> Corporation M5451 PCI AC-Link Controller Audio Device
>>
>>  Modem interrupt assignment and sharing:
>>  11:       1088    XT-PIC-XT        uhci_hcd:usb1, yenta, ALI 5451,
>> sonypi, eth0
>>  --- Bootup diagnostics for card in PCI slot 00:04.0 ----
>> [    0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff]
>> [    0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000, e0401fff]
>> [    0.421204] pci 0000:00:04.0: supports D1
>> [    0.421206] pci 0000:00:04.0: supports D2
>> [    0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
>> [    0.421212] pci 0000:00:04.0: PME# disabled
>> [   16.216264] ALI 5451 0000:00:04.0: power state changed by ACPI to D0
>> [   16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI
>> 11 (level, low) -> IRQ 11
>>
>>  The PCI slot 00:04.0 of the modem card may be disabled early in
>>  a bootup process,  but then enabled later. If modem drivers load
>>  but the  modem is not responsive, read DOCs/Bootup.txt about possible
>> fixes.
>>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>  if help is needed.
>> ####################dmesg.txt####################
>>           CPU0
>>  0:      19627    XT-PIC-XT        timer
>>  1:        466    XT-PIC-XT        i8042
>>  2:          0    XT-PIC-XT        cascade
>>  3:          2    XT-PIC-XT
>>  5:          2    XT-PIC-XT
>>  7:          3    XT-PIC-XT        parport0
>>  8:          2    XT-PIC-XT        rtc0
>>  9:        996    XT-PIC-XT        acpi
>>  10:      12650    XT-PIC-XT        ohci1394, uhci_hcd:usb2,
>> ehci_hcd:usb3, yenta, radeon@pci:0000:01:05.0
>>  11:       1088    XT-PIC-XT        uhci_hcd:usb1, yenta, ALI 5451,
>> sonypi, eth0
>>  12:       5615    XT-PIC-XT        i8042
>>  14:       8703    XT-PIC-XT        pata_ali
>>  15:       1971    XT-PIC-XT        pata_ali
>> NMI:          0   Non-maskable interrupts
>> LOC:          0   Local timer interrupts
>> RES:          0   Rescheduling interrupts
>> CAL:          0   function call interrupts
>> TLB:          0   TLB shootdowns
>> SPU:          0   Spurious interrupts
>> ERR:          0
>> MIS:          0
>>
>> [    0.000000] Initializing cgroup subsys cpuset
>> [    0.000000] Initializing cgroup subsys cpu
>> [    0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc
>> version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44
>> UTC 2008 (Ubuntu 2.6.27-7.14-generic)
>> [    0.000000] BIOS-provided physical RAM map:
>> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>> [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
>> [    0.000000]  BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
>> [    0.000000]  BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data)
>> [    0.000000]  BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS)
>> [    0.000000]  BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
>> [    0.000000]  BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>> [    0.000000] last_pfn = 0x1bf70 max_arch_pfn = 0x100000
>> [    0.000000] kernel direct mapping tables up to 1bf70000 @ 7000-d000
>> [    0.000000] RAMDISK: 1b792000 - 1bf5f052
>> [    0.000000] DMI present.
>> [    0.000000] ACPI: RSDP 000F6FD0, 0014 (r0 PTLTD )
>> [    0.000000] ACPI: RSDT 1BF773FE, 002C (r1 SONY   K7        6040000
>> LTP        0)
>> [    0.000000] ACPI: FACP 1BF7BF64, 0074 (r1 SONY   K7        6040000
>> PTL     F4240)
>> [    0.000000] ACPI: DSDT 1BF7742A, 4B3A (r1  SONY  K7        6040000
>> MSFT  100000E)
>> [    0.000000] ACPI: FACS 1BF7CFC0, 0040
>> [    0.000000] ACPI: BOOT 1BF7BFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000
>> LTP        1)
>> [    0.000000] ACPI: DMI detected: Sony
>> [    0.000000] 0MB HIGHMEM available.
>> [    0.000000] 447MB LOWMEM available.
>> [    0.000000]   mapped low ram: 0 - 1bf70000
>> [    0.000000]   low ram: 00000000 - 1bf70000
>> [    0.000000]   bootmap 00002000 - 000057f0
>> [    0.000000] (9 early reservations) ==> bootmem [0000000000 -
>> 001bf70000]
>> [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==>
>> [0000000000 - 0000001000]
>> [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==>
>> [0000001000 - 0000002000]
>> [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==>
>> [0000006000 - 0000007000]
>> [    0.000000]   #3 [0000100000 - 00005c0a20]    TEXT DATA BSS ==>
>> [0000100000 - 00005c0a20]
>> [    0.000000]   #4 [001b792000 - 001bf5f052]          RAMDISK ==>
>> [001b792000 - 001bf5f052]
>> [    0.000000]   #5 [00005c1000 - 00005c4000]    INIT_PG_TABLE ==>
>> [00005c1000 - 00005c4000]
>> [    0.000000]   #6 [000009f800 - 0000100000]    BIOS reserved ==>
>> [000009f800 - 0000100000]
>> [    0.000000]   #7 [0000007000 - 0000009000]          PGTABLE ==>
>> [0000007000 - 0000009000]
>> [    0.000000]   #8 [0000002000 - 0000006000]          BOOTMAP ==>
>> [0000002000 - 0000006000]
>> [    0.000000] Zone PFN ranges:
>> [    0.000000]   DMA      0x00000000 -> 0x00001000
>> [    0.000000]   Normal   0x00001000 -> 0x0001bf70
>> [    0.000000]   HighMem  0x0001bf70 -> 0x0001bf70
>> [    0.000000] Movable zone start PFN for each node
>> [    0.000000] early_node_map[2] active PFN ranges
>> [    0.000000]     0: 0x00000000 -> 0x0000009f
>> [    0.000000]     0: 0x00000100 -> 0x0001bf70
>> [    0.000000] On node 0 totalpages: 114447
>> [    0.000000] free_area_init_node: node 0, pgdat c048a500,
>> node_mem_map c1000000
>> [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
>> [    0.000000]   Normal zone: 109477 pages, LIFO batch:31
>> [    0.000000] ACPI: PM-Timer IO Port: 0x8008
>> [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
>> [    0.000000] Local APIC disabled by BIOS -- you can enable it with
>> "lapic"
>> [    0.000000] mapped APIC to ffffb000 (013f2000)
>> [    0.000000] PM: Registered nosave memory: 000000000009f000 -
>> 00000000000a0000
>> [    0.000000] PM: Registered nosave memory: 00000000000a0000 -
>> 00000000000dc000
>> [    0.000000] PM: Registered nosave memory: 00000000000dc000 -
>> 0000000000100000
>> [    0.000000] Allocating PCI resources starting at 30000000 (gap:
>> 2c000000:d3f80000)
>> [    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
>> [    0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
>> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> Total pages: 113440
>> [    0.000000] Kernel command line:
>> root=UUID=b7e12806-451d-4eef-b86b-a9b65d6c0a3e ro quiet splash
>> [    0.000000] Enabling fast FPU save and restore... done.
>> [    0.000000] Enabling unmasked SIMD FPU exception support... done.
>> [    0.000000] Initializing CPU#0
>> [    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
>> [    0.000000] TSC: PIT calibration confirmed by PMTIMER.
>> [    0.000000] TSC: using PIT calibration value
>> [    0.000000] Detected 2658.126 MHz processor.
>> [    0.004000] Console: colour VGA+ 80x25
>> [    0.004000] console [tty0] enabled
>> [    0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144
>> bytes)
>> [    0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072
>> bytes)
>> [    0.004000] Memory: 440132k/458176k available (2572k kernel code,
>> 17396k reserved, 1160k data, 424k init, 0k highmem)
>> [    0.004000] virtual kernel memory layout:
>> [    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
>> [    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>> [    0.004000]     vmalloc : 0xdc800000 - 0xff3fe000   ( 555 MB)
>> [    0.004000]     lowmem  : 0xc0000000 - 0xdbf70000   ( 447 MB)
>> [    0.004000]       .init : 0xc04ab000 - 0xc0515000   ( 424 kB)
>> [    0.004000]       .data : 0xc038329a - 0xc04a5680   (1160 kB)
>> [    0.004000]       .text : 0xc0100000 - 0xc038329a   (2572 kB)
>> [    0.004000] Checking if this processor honours the WP bit even in
>> supervisor mode...Ok.
>> [    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
>> [    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3,
>> MinObjects=0, CPUs=1, Nodes=1
>> [    0.004014] Calibrating delay loop (skipped), value calculated
>> using timer frequency.. 5316.25 BogoMIPS (lpj=10632504)
>> [    0.004040] Security Framework initialized
>> [    0.004051] SELinux:  Disabled at boot.
>> [    0.004076] AppArmor: AppArmor initialized
>> [    0.004091] Mount-cache hash table entries: 512
>> [    0.004326] Initializing cgroup subsys ns
>> [    0.004333] Initializing cgroup subsys cpuacct
>> [    0.004336] Initializing cgroup subsys memory
>> [    0.004359] CPU: Trace cache: 12K uops, L1 D cache: 8K
>> [    0.004363] CPU: L2 cache: 512K
>> [    0.004367] CPU: Hyper-Threading is disabled
>> [    0.004389] Checking 'hlt' instruction... OK.
>> [    0.020657] SMP alternatives: switching to UP code
>> [    0.028041] Freeing SMP alternatives: 11k freed
>> [    0.028049] ACPI: Core revision 20080609
>> [    0.033930] ACPI: Checking initramfs for custom DSDT
>> [    0.394845] ACPI: setting ELCR to 0200 (from 0c00)
>> [    0.396099] weird, boot CPU (#0) not listedby the BIOS.
>> [    0.396102] SMP motherboard not detected.
>> [    0.396106] Local APIC not detected. Using dummy APIC emulation.
>> [    0.396109] SMP disabled
>> [    0.396203] Brought up 1 CPUs
>> [    0.396207] Total of 1 processors activated (5316.25 BogoMIPS).
>> [    0.396224] CPU0 attaching sched-domain:
>> [    0.396229]  domain 0: span 0 level CPU
>> [    0.396232]   groups: 0
>> [    0.396602] net_namespace: 840 bytes
>> [    0.396616] Booting paravirtualized kernel on bare hardware
>> [    0.396887] Time:  3:36:10  Date: 12/04/08
>> [    0.396941] NET: Registered protocol family 16
>> [    0.397443] EISA bus registered
>> [    0.397481] ACPI: bus type pci registered
>> [    0.397753] PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=1
>> [    0.397757] PCI: Using configuration type 1 for base access
>> [    0.401665] ACPI: EC: Look up EC in DSDT
>> [    0.405888] ACPI: Interpreter enabled
>> [    0.405894] ACPI: (supports S0 S3 S4 S5)
>> [    0.405916] ACPI: Using PIC for interrupt routing
>> [    0.420826] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data =
>> 0x62
>> [    0.420831] ACPI: EC: driver started in poll mode
>> [    0.420924] ACPI: PCI Root Bridge [PCI0] (0000:00)
>> [    0.421036] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000, efffffff]
>> [    0.421042] PCI: 0000:00:00.0 reg 14 32bit mmio: [e0800000, e0800fff]
>> [    0.421105] PCI: 0000:00:03.0 reg 10 32bit mmio: [e0400000, e0400fff]
>> [    0.421112] PCI: 0000:00:03.0 reg 14 io port: [8400, 84ff]
>> [    0.421142] pci 0000:00:03.0: PME# supported from D3hot D3cold
>> [    0.421147] pci 0000:00:03.0: PME# disabled
>> [    0.421170] PCI: 0000:00:04.0 reg 10 io port: [8800, 88ff]
>> [    0.421176] PCI: 0000:00:04.0 reg 14 32bit mmio: [e0401000, e0401fff]
>> [    0.421204] pci 0000:00:04.0: supports D1
>> [    0.421206] pci 0000:00:04.0: supports D2
>> [    0.421208] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
>> [    0.421212] pci 0000:00:04.0: PME# disabled
>> [    0.421257] pci 0000:00:06.0: quirk: region 8000-803f claimed by
>> ali7101 ACPI
>> [    0.421261] pci 0000:00:06.0: quirk: region 8040-805f claimed by
>> ali7101 SMB
>> [    0.421340] PCI: 0000:00:0a.0 reg 10 32bit mmio: [e0402000, e0402fff]
>> [    0.421352] pci 0000:00:0a.0: supports D1
>> [    0.421354] pci 0000:00:0a.0: supports D2
>> [    0.421356] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.421360] pci 0000:00:0a.0: PME# disabled
>> [    0.421385] PCI: 0000:00:0a.1 reg 10 32bit mmio: [e0403000, e0403fff]
>> [    0.421397] pci 0000:00:0a.1: supports D1
>> [    0.421399] pci 0000:00:0a.1: supports D2
>> [    0.421401] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.421405] pci 0000:00:0a.1: PME# disabled
>> [    0.421427] PCI: 0000:00:0a.2 reg 10 32bit mmio: [e0404000, e04047ff]
>> [    0.421459] pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold
>> [    0.421464] pci 0000:00:0a.2: PME# disabled
>> [    0.421505] PCI: 0000:00:0c.0 reg 20 io port: [8080, 809f]
>> [    0.421523] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
>> [    0.421527] pci 0000:00:0c.0: PME# disabled
>> [    0.421561] PCI: 0000:00:0c.1 reg 20 io port: [80a0, 80bf]
>> [    0.421581] pci 0000:00:0c.1: PME# supported from D0 D3hot D3cold
>> [    0.421585] pci 0000:00:0c.1: PME# disabled
>> [    0.421607] PCI: 0000:00:0c.2 reg 10 32bit mmio: [e0404800, e04048ff]
>> [    0.421639] pci 0000:00:0c.2: PME# supported from D0 D3hot D3cold
>> [    0.421643] pci 0000:00:0c.2: PME# disabled
>> [    0.421682] PCI: 0000:00:0f.0 reg 20 io port: [80c0, 80cf]
>> [    0.421724] PCI: 0000:00:12.0 reg 10 io port: [9c00, 9cff]
>> [    0.421731] PCI: 0000:00:12.0 reg 14 32bit mmio: [e0404c00, e0404dff]
>> [    0.421760] pci 0000:00:12.0: supports D1
>> [    0.421761] pci 0000:00:12.0: supports D2
>> [    0.421764] pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold
>> [    0.421768] pci 0000:00:12.0: PME# disabled
>> [    0.421815] PCI: 0000:01:05.0 reg 10 32bit mmio: [f0000000, f7ffffff]
>> [    0.421821] PCI: 0000:01:05.0 reg 14 io port: [a000, a0ff]
>> [    0.421827] PCI: 0000:01:05.0 reg 18 32bit mmio: [e0500000, e050ffff]
>> [    0.421843] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
>> [    0.421857] pci 0000:01:05.0: supports D1
>> [    0.421858] pci 0000:01:05.0: supports D2
>> [    0.421885] PCI: bridge 0000:00:01.0 io port: [a000, afff]
>> [    0.421889] PCI: bridge 0000:00:01.0 32bit mmio: [e0500000, e05fffff]
>> [    0.421894] PCI: bridge 0000:00:01.0 32bit mmio pref: [f0000000,
>> f7ffffff]
>> [    0.421923] bus 00 -> node 0
>> [    0.421933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> [    0.422053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
>> [    0.425764] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11)
>> *0, disabled.
>> [    0.425986] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11)
>> [    0.426202] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 *11)
>> [    0.426422] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11)
>> *0, disabled.
>> [    0.426639] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 *10 11)
>> [    0.426858] ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11
>> [    0.427073] ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 *11)
>> [    0.427291] ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 *11)
>> [    0.427508] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 11)
>> *0, disabled.
>> [    0.427785] Linux Plug and Play Support v0.97 (c) Adam Belay
>> [    0.427844] pnp: PnP ACPI init
>> [    0.427859] ACPI: bus type pnp registered
>> [    0.436388] pnp: PnP ACPI: found 12 devices
>> [    0.436392] ACPI: ACPI bus type pnp unregistered
>> [    0.436399] PnPBIOS: Disabled by ACPI PNP
>> [    0.440333] PCI: Using ACPI for IRQ routing
>> [    0.440499] NET: Registered protocol family 8
>> [    0.440499] NET: Registered protocol family 20
>> [    0.440499] NetLabel: Initializing
>> [    0.440499] NetLabel:  domain hash size = 128
>> [    0.440499] NetLabel:  protocols = UNLABELED CIPSOv4
>> [    0.440499] NetLabel:  unlabeled traffic allowed by default
>> [    0.440499] tracer: 772 pages allocated for 65536 entries of 48 bytes
>> [    0.440499]    actual entries 65620
>> [    0.440770] AppArmor: AppArmor Filesystem Enabled
>> [    0.440791] ACPI: RTC can wake from S4
>> [    0.440811] system 00:05: ioport range 0x40b-0x40b has been reserved
>> [    0.440811] system 00:05: ioport range 0x480-0x48f has been reserved
>> [    0.440811] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
>> [    0.440811] system 00:05: ioport range 0x4d6-0x4d6 has been reserved
>> [    0.440811] system 00:05: ioport range 0x8000-0x807f could not be
>> reserved
>> [    0.440811] system 00:05: ioport range 0xfe00-0xfe01 has been reserved
>> [    0.440811] system 00:05: ioport range 0xfe10-0xfe11 has been reserved
>> [    0.440811] system 00:06: iomem range 0x0-0x9ffff could not be reserved
>> [    0.440811] system 00:06: iomem range 0xdc000-0xdffff could not be
>> reserved
>> [    0.440811] system 00:06: iomem range 0xe0000-0xfffff could not be
>> reserved
>> [    0.440811] system 00:06: iomem range 0x100000-0x1bffffff could not
>> be reserved
>> [    0.440811] system 00:06: iomem range 0xfff80000-0xffffffff could
>> not be reserved
>> [    0.440811] system 00:06: iomem range 0xe0800000-0xe0800fff has been
>> reserved
>> [    0.476831] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>> [    0.476836] pci 0000:00:01.0:   IO window: 0xa000-0xafff
>> [    0.476841] pci 0000:00:01.0:   MEM window: 0xe0500000-0xe05fffff
>> [    0.476845] pci 0000:00:01.0:   PREFETCH window:
>> 0x000000f0000000-0x000000f7ffffff
>> [    0.476852] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
>> [    0.476854] pci 0000:00:0a.0:   IO window: 0x001000-0x0010ff
>> [    0.476858] pci 0000:00:0a.0:   IO window: 0x001400-0x0014ff
>> [    0.476863] pci 0000:00:0a.0:   PREFETCH window: 0x30000000-0x33ffffff
>> [    0.476867] pci 0000:00:0a.0:   MEM window: 0x34000000-0x37ffffff
>> [    0.476871] pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06
>> [    0.476874] pci 0000:00:0a.1:   IO window: 0x001800-0x0018ff
>> [    0.476878] pci 0000:00:0a.1:   IO window: 0x001c00-0x001cff
>> [    0.476882] pci 0000:00:0a.1:   PREFETCH window: 0x38000000-0x3bffffff
>> [    0.476887] pci 0000:00:0a.1:   MEM window: 0x3c000000-0x3fffffff
>> [    0.477258] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
>> [    0.477263] PCI: setting IRQ 11 as level-triggered
>> [    0.477268] pci 0000:00:0a.0: PCI INT A -> Link[LNK2] -> GSI 11
>> (level, low) -> IRQ 11
>> [    0.477540] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
>> [    0.477543] PCI: setting IRQ 10 as level-triggered
>> [    0.477548] pci 0000:00:0a.1: PCI INT B -> Link[LNK4] -> GSI 10
>> (level, low) -> IRQ 10
>> [    0.477554] bus: 00 index 0 io port: [0, ffff]
>> [    0.477556] bus: 00 index 1 mmio: [0, ffffffff]
>> [    0.477559] bus: 01 index 0 io port: [a000, afff]
>> [    0.477562] bus: 01 index 1 mmio: [e0500000, e05fffff]
>> [    0.477564] bus: 01 index 2 mmio: [f0000000, f7ffffff]
>> [    0.477567] bus: 01 index 3 mmio: [0, 0]
>> [    0.477569] bus: 02 index 0 io port: [1000, 10ff]
>> [    0.477572] bus: 02 index 1 io port: [1400, 14ff]
>> [    0.477574] bus: 02 index 2 mmio: [30000000, 33ffffff]
>> [    0.477577] bus: 02 index 3 mmio: [34000000, 37ffffff]
>> [    0.477579] bus: 06 index 0 io port: [1800, 18ff]
>> [    0.477582] bus: 06 index 1 io port: [1c00, 1cff]
>> [    0.477584] bus: 06 index 2 mmio: [38000000, 3bffffff]
>> [    0.477587] bus: 06 index 3 mmio: [3c000000, 3fffffff]
>> [    0.477610] NET: Registered protocol family 2
>> [    0.477849] IP route cache hash table entries: 4096 (order: 2, 16384
>> bytes)
>> [    0.478188] TCP established hash table entries: 16384 (order: 5,
>> 131072 bytes)
>> [    0.478315] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>> [    0.478430] TCP: Hash tables configured (established 16384 bind 16384)
>> [    0.478434] TCP reno registered
>> [    0.478576] NET: Registered protocol family 1
>> [    0.478749] checking if image is initramfs... it is
>> [    0.980128] Switched to high resolution mode on CPU 0
>> [    1.236336] Freeing initrd memory: 7988k freed
>> [    1.236740] Simple Boot Flag at 0x35 set to 0x1
>> [    1.237409] audit: initializing netlink socket (disabled)
>> [    1.237447] type=2000 audit(1228361770.236:1): initialized
>> [    1.242678] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>> [    1.245896] VFS: Disk quotas dquot_6.5.1
>> [    1.246053] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> [    1.246214] msgmni has been set to 875
>> [    1.246406] io scheduler noop registered
>> [    1.246410] io scheduler anticipatory registered
>> [    1.246413] io scheduler deadline registered
>> [    1.246435] io scheduler cfq registered (default)
>> [    1.246492] pci 0000:00:07.0: Activating ISA DMA hang workarounds
>> [    1.246559] pci 0000:01:05.0: Boot video device
>> [    1.247102] isapnp: Scanning for PnP cards...
>> [    1.601376] isapnp: No Plug & Play device found
>> [    1.670035] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>> [    1.670179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550
>> [    1.671493] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 11
>> [    1.671500] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> GSI 11
>> (level, low) -> IRQ 11
>> [    1.671508] serial 0000:00:03.0: PCI INT A disabled
>> [    1.674033] brd: module loaded
>> [    1.674149] input: Macintosh mouse button emulation as
>> /devices/virtual/input/input0
>> [    1.674355] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
>> 0x60,0x64 irq 1,12
>> [    1.678060] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [    1.678070] serio: i8042 AUX port at 0x60,0x64 irq 12
>> [    1.678734] mice: PS/2 mouse device common for all mice
>> [    1.678989] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>> [    1.679020] rtc0: alarms up to one month, y3k
>> [    1.679231] EISA: Probing bus 0 at eisa.0
>> [    1.679243] Cannot allocate resource for EISA slot 1
>> [    1.679271] Cannot allocate resource for EISA slot 8
>> [    1.679274] EISA: Detected 0 cards.
>> [    1.679279] cpuidle: using governor ladder
>> [    1.679282] cpuidle: using governor menu
>> [    1.679972] TCP cubic registered
>> [    1.680063] Using IPI No-Shortcut mode
>> [    1.680487] registered taskstats version 1
>> [    1.680625]   Magic number: 4:233:613
>> [    1.680643]  isa: hash matches
>> [    1.680721] tty ptye3: hash matches
>> [    1.680820] pci 0000:00:0a.0: hash matches
>> [    1.680896] rtc_cmos 00:02: setting system clock to 2008-12-04
>> 03:36:11 UTC (1228361771)
>> [    1.680901] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>> [    1.680903] EDD information not available.
>> [    1.681786] Freeing unused kernel memory: 424k freed
>> [    1.681848] Write protecting the kernel text: 2576k
>> [    1.681884] Write protecting the kernel read-only data: 936k
>> [    1.712227] input: AT Translated Set 2 keyboard as
>> /devices/platform/i8042/serio0/input/input1
>> [    1.916830] fuse init (API version 7.9)
>> [    2.153320] ACPI: CPU0 (power states: C1[C1] C2[C2])
>> [    2.158379] processor ACPI0007:00: registered as cooling_device0
>> [    2.158385] ACPI: Processor [CPU0] (supports 8 throttling states)
>> [    2.186683] thermal LNXTHERM:01: registered as thermal_zone0
>> [    2.195703] ACPI: Thermal Zone [TZ01] (39 C)
>> [    3.435666] usbcore: registered new interface driver usbfs
>> [    3.435708] usbcore: registered new interface driver hub
>> [    3.449846] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
>> [    3.449854] ohci1394 0000:00:0a.2: PCI INT C -> Link[LNK5] -> GSI
>> 10 (level, low) -> IRQ 10
>> [    3.502708] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]
>> MMIO=[e0404000-e04047ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>> [    3.522828] usbcore: registered new device driver usb
>> [    3.529450] No dock devices found.
>> [    3.558303] SCSI subsystem initialized
>> [    3.573485] USB Universal Host Controller Interface driver v3.0
>> [    3.577306] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>> [    3.641823] libata version 3.00 loaded.
>> [    3.685077] uhci_hcd 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI
>> 11 (level, low) -> IRQ 11
>> [    3.685094] uhci_hcd 0000:00:0c.0: UHCI Host Controller
>> [    3.685194] uhci_hcd 0000:00:0c.0: new USB bus registered, assigned
>> bus number 1
>> [    3.685226] uhci_hcd 0000:00:0c.0: irq 11, io base 0x00008080
>> [    3.685520] usb usb1: configuration #1 chosen from 1 choice
>> [    3.685559] hub 1-0:1.0: USB hub found
>> [    3.685577] hub 1-0:1.0: 2 ports detected
>> [    3.892711] uhci_hcd 0000:00:0c.1: PCI INT B -> Link[LNK4] -> GSI
>> 10 (level, low) -> IRQ 10
>> [    3.892729] uhci_hcd 0000:00:0c.1: UHCI Host Controller
>> [    3.892769] uhci_hcd 0000:00:0c.1: new USB bus registered, assigned
>> bus number 2
>> [    3.892800] uhci_hcd 0000:00:0c.1: irq 10, io base 0x000080a0
>> [    3.892977] usb usb2: configuration #1 chosen from 1 choice
>> [    3.893015] hub 2-0:1.0: USB hub found
>> [    3.893030] hub 2-0:1.0: 2 ports detected
>> [    4.100720] ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNK5] -> GSI
>> 10 (level, low) -> IRQ 10
>> [    4.100748] ehci_hcd 0000:00:0c.2: EHCI Host Controller
>> [    4.100790] ehci_hcd 0000:00:0c.2: new USB bus registered, assigned
>> bus number 3
>> [    4.100848] ehci_hcd 0000:00:0c.2: irq 10, io mem 0xe0404800
>> [    4.112096] ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95,
>> driver 10 Dec 2004
>> [    4.112430] usb usb3: configuration #1 chosen from 1 choice
>> [    4.112470] hub 3-0:1.0: USB hub found
>> [    4.112485] hub 3-0:1.0: 4 ports detected
>> [    4.321310] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10) is not
>> an 8139C+ compatible chip
>> [    4.321317] 8139cp 0000:00:12.0: Try the "8139too" driver instead.
>> [    4.327282] 8139too Fast Ethernet driver 0.9.28
>> [    4.327690] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
>> [    4.327696] 8139too 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 11
>> (level, low) -> IRQ 11
>> [    4.328388] eth0: RealTek RTL8139 at 0x9c00, 08:00:46:c1:2f:38, IRQ 11
>> [    4.328391] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>> [    4.333699] pata_ali 0000:00:0f.0: can't derive routing for PCI INT A
>> [    4.334315] scsi0 : pata_ali
>> [    4.334514] scsi1 : pata_ali
>> [    4.335705] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x80c0
>> irq 14
>> [    4.335709] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x80c8
>> irq 15
>> [    4.436137] usb 3-3: new high speed USB device using ehci_hcd and
>> address 2
>> [    4.496480] ata1.00: ATA-5: HITACHI_DK23FA-60, 00M4A0A1, max UDMA/100
>> [    4.496486] ata1.00: 117210240 sectors, multi 16: LBA
>> [    4.504392] ata1.00: configured for UDMA/100
>> [    4.570936] usb 3-3: configuration #1 chosen from 1 choice
>> [    4.668513] ata2.00: ATAPI: SONY    DVD RW DW-U50A, 1.5d, max UDMA/33
>> [    4.668530] ata2.00: WARNING: ATAPI DMA disabled for reliablity
>> issues.  It can be enabled
>> [    4.668534] ata2.00: WARNING: via pata_ali.atapi_dma modparam or
>> corresponding sysfs node.
>> [    4.684549] ata2.00: configured for UDMA/33
>> [    4.684800] scsi 0:0:0:0: Direct-Access     ATA
>> HITACHI_DK23FA-6 00M4 PQ: 0 ANSI: 5
>> [    4.689907] scsi 1:0:0:0: CD-ROM            SONY     DVD RW DW-U50A
>>  1.5d PQ: 0 ANSI: 5
>> [    4.875853] scsi 0:0:0:0: Attached scsi generic sg0 type 0
>> [    4.875909] scsi 1:0:0:0: Attached scsi generic sg1 type 5
>> [    4.905017] usbcore: registered new interface driver libusual
>> [    4.915604] Initializing USB Mass Storage driver...
>> [    4.926183] scsi2 : SCSI emulation for USB Mass Storage devices
>> [    4.930846] Driver 'sd' needs updating - please use bus_type methods
>> [    4.931041] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors
>> (60012 MB)
>> [    4.931071] sd 0:0:0:0: [sda] Write Protect is off
>> [    4.931074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [    4.931121] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [    4.931230] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors
>> (60012 MB)
>> [    4.931256] sd 0:0:0:0: [sda] Write Protect is off
>> [    4.931260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [    4.931305] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [    4.931312]  sda:<6>usbcore: registered new interface driver
>> usb-storage
>> [    4.933380] USB Mass Storage support registered.
>> [    4.933587] usb-storage: device found at 2
>> [    4.933590] usb-storage: waiting for device to settle before scanning
>> [    4.954192] Driver 'sr' needs updating - please use bus_type methods
>> [    4.956254] ieee1394: Host added: ID:BUS[0-00:1023]
>> GUID[080046030188cd58]
>> [    4.976443] Marking TSC unstable due to TSC halts in idle
>> [    4.981461]  sda1 sda2 < sda5 sda6 sda7 sda8 >
>> [    5.060309] sd 0:0:0:0: [sda] Attached SCSI disk
>> [    5.078879] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
>> tray
>> [    5.078888] Uniform CD-ROM driver Revision: 3.20
>> [    5.079060] sr 1:0:0:0: Attached scsi CD-ROM sr0
>> [    5.525816] PM: Starting manual resume from disk
>> [    5.525824] PM: Resume from partition 8:6
>> [    5.525826] PM: Checking hibernation image.
>> [    5.526062] PM: Resume from disk failed.
>> [    5.604150] kjournald starting.  Commit interval 5 seconds
>> [    5.604179] EXT3-fs: mounted filesystem with ordered data mode.
>> [    9.932309] usb-storage: device scan complete
>> [    9.933393] scsi 2:0:0:0: Direct-Access     USB2.0   Mobile Disk
>>  1.00 PQ: 0 ANSI: 2
>> [    9.934990] sd 2:0:0:0: [sdb] 4030463 512-byte hardware sectors (2064
>> MB)
>> [    9.935864] sd 2:0:0:0: [sdb] Write Protect is off
>> [    9.935867] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
>> [    9.935871] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>> [    9.938722] sd 2:0:0:0: [sdb] 4030463 512-byte hardware sectors (2064
>> MB)
>> [    9.939596] sd 2:0:0:0: [sdb] Write Protect is off
>> [    9.939599] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
>> [    9.939602] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>> [    9.939609]  sdb: sdb1
>> [   10.048277] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>> [   10.048598] sd 2:0:0:0: Attached scsi generic sg2 type 0
>> [   13.037997] udevd version 124 started
>> [   13.699612] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [   13.774796] shpchp: Standard Hot Plug PCI Controller Driver version:
>> 0.4
>> [   13.843248] Linux agpgart interface v0.103
>> [   13.891353] agpgart-ati 0000:00:00.0: Ati IGP345M chipset
>> [   13.961486] agpgart-ati 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
>> [   14.388428] Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8158]
>> [   14.458941] ACPI: AC Adapter [ACAD] (on-line)
>> [   14.516681] Yenta: ISA IRQ mask 0x00a8, PCI irq 11
>> [   14.516687] Socket status: 30000006
>> [   14.517213] input: Power Button (FF) as
>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>> [   14.528123] ACPI: Power Button (FF) [PWRF]
>> [   14.528426] input: Power Button (CM) as
>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>> [   14.544105] ACPI: Power Button (CM) [PBTN]
>> [   14.544448] input: Lid Switch as
>> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
>> [   14.544632] ACPI: Lid Switch [LID]
>> [   14.563247] Yenta: CardBus bridge found at 0000:00:0a.1 [104d:8158]
>> [   14.692359] Yenta: ISA IRQ mask 0x00a8, PCI irq 10
>> [   14.692364] Socket status: 30000006
>> [   14.694501] ACPI: EC: non-query interrupt received, switching to
>> interrupt mode
>> [   14.698825] ali15x3_smbus 0000:00:06.0: ALI15X3_smb region
>> uninitialized - upgrade BIOS or use force_addr=0xaddr
>> [   14.698834] ali15x3_smbus 0000:00:06.0: ALI15X3 not detected,
>> module not inserted.
>> [   14.904580] ACPI: Battery Slot [BAT1] (battery present)
>> [   15.944450] sony-laptop: Sony Notebook Control Driver v0.6.
>> [   15.971330] input: Sony Vaio Keys as
>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/SNY5001:00/input/input5
>> [   15.984278] input: Sony Vaio Jogdial as /devices/virtual/input/input6
>> [   16.158529] input: Video Bus as
>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0a/device:0b/input/input7
>> [   16.172136] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post:
>> no)
>> [   16.183661] parport_pc 00:0a: reported by Plug and Play ACPI
>> [   16.183770] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
>> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>> [   16.216264] ALI 5451 0000:00:04.0: power state changed by ACPI to D0
>> [   16.216633] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
>> [   16.216638] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI
>> 11 (level, low) -> IRQ 11
>> [   16.909332] input: PC Speaker as /devices/platform/pcspkr/input/input8
>> [   17.267206] input: PS/2 Mouse as
>> /devices/platform/i8042/serio1/input/input9
>> [   17.325731] input: AlpsPS/2 ALPS GlidePoint as
>> /devices/platform/i8042/serio1/input/input10
>> [   20.223118] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>> 0x220-0x22f 0x330-0x337 0x388-0x38f
>> [   20.225384] cs: IO port probe 0x3e0-0x4ff: clean.
>> [   20.226259] cs: IO port probe 0x820-0x8ff: clean.
>> [   20.227243] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>> 0x220-0x22f 0x330-0x337 0x388-0x38f
>> [   20.229477] cs: IO port probe 0x3e0-0x4ff: clean.
>> [   20.230351] cs: IO port probe 0x820-0x8ff: clean.
>> [   20.231207] cs: IO port probe 0xc00-0xcf7: clean.
>> [   20.232294] cs: IO port probe 0xa00-0xaff: clean.
>> [   20.234039] cs: IO port probe 0xc00-0xcf7: clean.
>> [   20.235080] cs: IO port probe 0xa00-0xaff: clean.
>> [   20.848038] AC'97 1 does not respond - RESET
>> [   20.864038] AC'97 1 access is not valid [0xffffffff], removing mixer.
>> [   20.864048] ali mixer 1 creating error.
>> [   22.042820] lp0: using parport0 (interrupt-driven).
>> [   22.270522] Adding 1253028k swap on /dev/sda6.  Priority:-1
>> extents:1 across:1253028k
>> [   22.848407] EXT3 FS on sda5, internal journal
>> [   24.167105] type=1505 audit(1228349194.280:2):
>> operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
>> name2="default" pid=4076
>> [   24.390331] type=1505 audit(1228349194.504:3):
>> operation="profile_load" name="/usr/lib/cups/backend/cups-pdf"
>> name2="default" pid=4081
>> [   24.390845] type=1505 audit(1228349194.504:4):
>> operation="profile_load" name="/usr/sbin/cupsd" name2="default"
>> pid=4081
>> [   24.572943] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [   25.424608] ACPI: WMI: Mapper loaded
>> [   26.678424] warning: `avahi-daemon' uses 32-bit capabilities
>> (legacy support in use)
>> [   26.744141] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>> [   26.744152] apm: overridden by ACPI.
>> [   26.974597] ppdev: user-space parallel port driver
>> [   27.370850] sonypi: Sony Programmable I/O Controller Driver v1.26.
>> [   27.373115] sonypi: please try the sony-laptop module instead and
>> report failures, see also
>> http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
>> [   27.376122] sonypi: detected type2 model, verbose = 0, fnkeyinit =
>> off, camera = off, compat = off, mask = 0xffffffff, useinput = on,
>> acpi = on
>> [   27.376136] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
>> [   27.376139] sonypi: device allocated minor is 60
>> [   27.381187] input: Sony Vaio Jogdial as
>> /devices/platform/sonypi/input/input11
>> [   27.412392] input: Sony Vaio Keys as
>> /devices/platform/sonypi/input/input12
>> [   27.485856] sonypi command failed at
>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1 (line
>> 653)
>> [   27.529505] sonypi command failed at
>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2 (line
>> 664)
>> [   27.573141] sonypi command failed at
>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call2 (line
>> 666)
>> [   27.616781] sonypi command failed at
>> /build/buildd/linux-2.6.27/drivers/char/sonypi.c : sonypi_call1 (line
>> 653)
>> [   29.719152] Bluetooth: Core ver 2.13
>> [   29.722230] NET: Registered protocol family 31
>> [   29.722240] Bluetooth: HCI device and connection manager initialized
>> [   29.722246] Bluetooth: HCI socket layer initialized
>> [   29.747817] Bluetooth: L2CAP ver 2.11
>> [   29.747828] Bluetooth: L2CAP socket layer initialized
>> [   29.775634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>> [   29.775643] Bluetooth: BNEP filters: protocol multicast
>> [   29.798271] Bluetooth: RFCOMM socket layer initialized
>> [   29.798654] Bluetooth: RFCOMM TTY layer initialized
>> [   29.798663] Bluetooth: RFCOMM ver 1.10
>> [   29.829262] Bridge firewalling registered
>> [   29.830471] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM
>> feature.
>> [   29.848436] Bluetooth: SCO (Voice Link) ver 0.6
>> [   29.848468] Bluetooth: SCO socket layer initialized
>> [   31.798487] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
>> [   31.798514] pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10
>> (level, low) -> IRQ 10
>> [   32.045868] [drm] Initialized drm 1.1.0 20060810
>> [   32.065087] [drm] Initialized radeon 1.29.0 20080528 on minor 0
>> [   32.408164] agpgart-ati 0000:00:00.0: AGP 2.0 bridge
>> [   32.408203] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x
>> mode
>> [   32.408255] pci 0000:01:05.0: putting AGP V2 device into 4x mode
>> [   32.559341] [drm] Setting GART location based on new memory map
>> [   32.559362] [drm] Loading R100 Microcode
>> [   32.559410] [drm] writeback test succeeded in 1 usecs
>> [   33.960725] eth0: link down
>> [  133.708158] ppdev0: registered pardevice
>> [  133.756068] ppdev0: unregistered pardevice
>> [  135.520452] ppdev0: registered pardevice
>> [  135.568396] ppdev0: unregistered pardevice
>> [  135.796362] type=1503 audit(1228349305.912:5):
>> operation="inode_permission" requested_mask="r::" denied_mask="r::"
>> fsuid=7 name="/proc/5785/net/" pid=5785 profile="/usr/sbin/cupsd"
>> [  135.906488] NET: Registered protocol family 10
>> [  135.908629] lo: Disabled Privacy Extensions
>> [  135.910608] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [  135.913224] type=1503 audit(1228349306.028:6):
>> operation="socket_create" family="ax25" sock_type="dgram" protocol=0
>> pid=5785 profile="/usr/sbin/cupsd"
>> [  135.913252] type=1503 audit(1228349306.028:7):
>> operation="socket_create" family="netrom" sock_type="seqpacket"
>> protocol=0 pid=5785 profile="/usr/sbin/cupsd"
>> [  135.913261] type=1503 audit(1228349306.028:8):
>> operation="socket_create" family="rose" sock_type="dgram" protocol=0
>> pid=5785 profile="/usr/sbin/cupsd"
>> [  135.913268] type=1503 audit(1228349306.028:9):
>> operation="socket_create" family="ipx" sock_type="dgram" protocol=0
>> pid=5785 profile="/usr/sbin/cupsd"
>> [  135.913275] type=1503 audit(1228349306.028:10):
>> operation="socket_create" family="appletalk" sock_type="dgram"
>> protocol=0 pid=5785 profile="/usr/sbin/cupsd"
>> [  135.913282] type=1503 audit(1228349306.028:11):
>> operation="socket_create" family="econet" sock_type="dgram" protocol=0
>> pid=5785 profile="/usr/sbin/cupsd"
>> [  135.913289] type=1503 audit(1228349306.028:12):
>> operation="socket_create" family="ash" sock_type="dgram" protocol=0
>> pid=5785 profile="/usr/sbin/cupsd"
>> [  135.913296] type=1503 audit(1228349306.028:13):
>> operation="socket_create" family="x25" sock_type="seqpacket"
>> protocol=0 pid=5785 profile="/usr/sbin/cupsd"
>> [  135.913425] type=1503 audit(1228349306.028:14):
>> operation="inode_permission" requested_mask="::r" denied_mask="::r"
>> fsuid=7 name="/proc/5785/net/dev" pid=5785 profile="/usr/sbin/cupsd"
>> [  135.939426] ppdev0: registered pardevice
>> [  135.988553] ppdev0: unregistered pardevice
>>
>> Module                  Size  Used by
>> ipv6                  263972  8
>> nls_iso8859_1          12032  1
>> nls_cp437              13696  1
>> vfat                   18816  1
>> fat                    57376  1 vfat
>> binfmt_misc            16904  1
>> radeon                147616  2
>> drm                    86056  3 radeon
>> sco                    18308  2
>> bridge                 56980  0
>> stp                    10628  1 bridge
>> rfcomm                 44432  0
>> bnep                   20480  2
>> l2cap                  30464  6 rfcomm,bnep
>> bluetooth              61924  6 sco,rfcomm,bnep,l2cap
>> sonypi                 26648  0
>> ppdev                  15620  0
>> speedstep_lib          12676  0
>> cpufreq_userspace      11396  0
>> cpufreq_ondemand       14988  0
>> cpufreq_stats          13188  0
>> cpufreq_powersave       9856  0
>> cpufreq_conservative    14600  0
>> freq_table             12672  2 cpufreq_ondemand,cpufreq_stats
>> wmi                    14504  0
>> pci_slot               12552  0
>> sbs                    19464  0
>> sbshc                  13440  1 sbs
>> iptable_filter         10752  0
>> ip_tables              19600  1 iptable_filter
>> x_tables               22916  1 ip_tables
>> sbp2                   29324  0
>> lp                     17156  0
>> joydev                 18368  0
>> pcmcia                 43052  0
>> evdev                  17696  16
>> psmouse                45200  0
>> serio_raw              13444  0
>> pcspkr                 10624  0
>> snd_ali5451            27532  3
>> parport_pc             39204  1
>> video                  25104  0
>> snd_ac97_codec        111652  1 snd_ali5451
>> parport                42604  3 ppdev,lp,parport_pc
>> output                 11008  1 video
>> ac97_bus                9856  1 snd_ac97_codec
>> snd_pcm_oss            46848  0
>> sony_laptop            39004  0
>> snd_mixer_oss          22784  1 snd_pcm_oss
>> snd_pcm                83204  3 snd_ali5451,snd_ac97_codec,snd_pcm_oss
>> snd_seq_dummy          10884  0
>> container              11520  0
>> snd_seq_oss            38528  0
>> snd_seq_midi           14336  0
>> i2c_ali1535            14340  0
>> snd_rawmidi            29824  1 snd_seq_midi
>> snd_seq_midi_event     15232  2 snd_seq_oss,snd_seq_midi
>> i2c_ali15x3            14852  0
>> battery                18436  0
>> snd_seq                57776  6
>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
>> button                 14224  0
>> ac                     12292  0
>> yenta_socket           31756  2
>> snd_timer              29960  2 snd_pcm,snd_seq
>> snd_seq_device         15116  5
>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
>> rsrc_nonstatic         19072  1 yenta_socket
>> i2c_core               31892  2 i2c_ali1535,i2c_ali15x3
>> pcmcia_core            43412  3 pcmcia,yenta_socket,rsrc_nonstatic
>> snd                    63268  16
>> snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
>> soundcore              15328  1 snd
>> snd_page_alloc         16136  1 snd_pcm
>> ati_agp                14988  1
>> agpgart                42184  2 drm,ati_agp
>> shpchp                 37908  0
>> pci_hotplug            35236  1 shpchp
>> ext3                  133256  1
>> jbd                    55444  1 ext3
>> mbcache                16004  1 ext3
>> sr_mod                 22212  0
>> cdrom                  43168  1 sr_mod
>> sd_mod                 42264  6
>> crc_t10dif              9984  1 sd_mod
>> usb_storage            81728  1
>> libusual               27156  1 usb_storage
>> sg                     39732  0
>> pata_acpi              12160  0
>> pata_ali               16516  3
>> 8139too                31616  0
>> ata_generic            12932  0
>> libata                177312  3 pata_acpi,pata_ali,ata_generic
>> 8139cp                 27520  0
>> uhci_hcd               30736  0
>> ehci_hcd               43276  0
>> mii                    13440  2 8139too,8139cp
>> scsi_mod              155212  6 sbp2,sr_mod,sd_mod,usb_storage,sg,libata
>> dock                   16656  1 libata
>> ohci1394               37936  0
>> usbcore               148848  5 usb_storage,libusual,uhci_hcd,ehci_hcd
>> ieee1394               96324  2 sbp2,ohci1394
>> thermal                23708  0
>> processor              42156  2 thermal
>> fan                    12548  0
>> fbcon                  47648  0
>> tileblit               10880  1 fbcon
>> font                   16512  1 fbcon
>> bitblit                13824  1 fbcon
>> softcursor              9984  1 bitblit
>> fuse                   60828  5
>>
>> #########################################################
>>
>> I undrestand almost nothing this time! So, please help me.
>>
>>
>>
>> Thank you.
>>
>

Attachment: Modem.tar.gz
Description: GNU Zip compressed data


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux