List Would someone with a functioning modem of this type ---------- High Definition Audio Card with AL883 Audio chip and modem : Motorola chip 10573055 Hosted on a Ubuntu 2.6.24-19-generic system /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko ------------- Please run: $ sudo slmodemd -c USA --log --debug=2 --alsa hw:0,6 Then a wvdial dialout in another console and send us the resultant log file on slmodemd actions. A success as desired to compare with Erin's problem, See below MarvS On Tue, Sep 9, 2008 at 12:19 AM, Erin C. <sonyadora@xxxxxxxxx> wrote: > Marvin Stodolsky wrote: >> >> Erin, >> >> RE: >> >> /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >> /lib/modules/2.6.24-19-generic/kernel/sound/pci/hda/snd-hda-intel.ko >> ------------ >> The last is the the update installed by the ALSA package. >> But the default uage I believe is to the first, a variant provided by >> Ubuntu. >> So do something like (on one line): >> $ sudo mv >> >> /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >> /root/ >> > > Moving the driver just results in no sound card being configured upon > reboot. There's no sound and slmodemd gives this error: > > sonyadora@localhost:~$ sudo slmodemd -c USA --alsa hw:0,6 > [sudo] password for sonyadora: > error: mixer setup: attach hw:0 error: No such file or directory > ALSA lib pcm_hw.c:1207:(_snd_pcm_hw_open) Invalid value for card > error: alsa setup: cannot open playback device 'hw:0,6': No such file or > directory > error: cannot setup device `hw:0,6' > > > I put it back and rebooted to try your other suggestion which returned: > > sonyadora@localhost:~$ sudo slmodemd -c USA --log --debug=2 --alsa hw:0,6 > [sudo] password for sonyadora: > SmartLink Soft Modem: version 2.9.11 Aug 3 2008 21:41:20 > <636.702838> SmartLink Soft Modem: version 2.9.11 Aug 3 2008 21:41:20 > <636.702998> hw:0,6: startup modem... > <636.703168> hw:0,6: update termios... > symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. > modem `hw:0,6' created. TTY is `/dev/pts/1' > <636.704280> open file: /var/lib/slmodem/data.hw:0,6... > <636.704404> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or > directory > <636.773615> main: rt applyed: SCHED_FIFO, pri 99 > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > <716.131074> main: termios changed. > <716.131189> hw:0,6: update termios... > <716.191783> main: termios changed. > <716.191870> hw:0,6: update termios... > <716.288527> hw:0,6: run cmd: ATZ > <716.288621> hw:0,6: modem reset... > <716.288673> hw:0,6: modem set state: 1 --> 1... > <716.288704> hw:0,6: modem set mode: -> 0... > <716.288734> hw:0,6: modem report result: 0 (OK) > <716.389598> hw:0,6: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0 > <716.389707> hw:0,6: modem set mode: -> 0... > <716.389737> hw:0,6: modem report result: 0 (OK) > <716.488873> hw:0,6: run cmd: ATDT5090082 > <716.488973> hw:0,6: modem dial: T5090082... > <716.489002> hw:0,6: modem_dial_start... > <716.490212> hw:0,6: modem_start.. > <716.490242> hw:0,6: modem set state: 1 --> 2... > <716.490269> hw:0,6: new state: DP_ESTAB > <716.490293> main: alsa_ioctl: cmd 8, arg 3... > <716.490319> hw:0,6: modem set hook: 0 --> 1... > <716.490344> main: alsa_ioctl: cmd 2, arg 1... > <716.490545> main: alsa_ioctl: cmd 11, arg 0... > <716.490656> main: alsa_ioctl: cmd 4, arg 2580... > <716.490687> main: alsa_ioctl: cmd 7, arg 30... > <716.490712> main: alsa_start... > Hardware PCM card 0 'HDA Intel' device 6 subdevice 0 > Its setup is: > stream : PLAYBACK > access : RW_INTERLEAVED > format : S16_LE > subformat : STD > channels : 1 > rate : 9600 > exact rate : 9600 (9600/1) > msbits : 16 > buffer_size : 2048 > period_size : 64 > period_time : 6666 > tick_time : 0 > tstamp_mode : NONE > period_step : 1 > sleep_min : 0 > avail_min : 64 > xfer_align : 4 > start_threshold : 2147483647 > stop_threshold : 2048 > silence_threshold: 0 > silence_size : 0 > boundary : 1073741824 > Hardware PCM card 0 'HDA Intel' device 6 subdevice 0 > Its setup is: > stream : CAPTURE > access : RW_INTERLEAVED > format : S16_LE > subformat : STD > channels : 1 > rate : 9600 > exact rate : 9600 (9600/1) > msbits : 16 > buffer_size : 2048 > period_size : 64 > period_time : 6666 > tick_time : 0 > tstamp_mode : NONE > period_step : 1 > sleep_min : 0 > avail_min : 64 > xfer_align : 4 > start_threshold : 2147483647 > stop_threshold : 2048 > silence_threshold: 0 > silence_size : 0 > boundary : 1073741824 > <716.521616> main: startup write: 384... > <736.922978> hw:0,6: 195776: change dp: --> 8... > <738.669836> main: alsa_ioctl: cmd 10, arg 0... > <738.669879> main: delay = 424 > <738.669950> hw:0,6: 212544: change dp: --> 92... > <738.674055> main: alsa_ioctl: cmd 10, arg 0... > <738.674093> main: delay = 424 > <738.676303> main: change delay -64... > <738.682965> main: change delay -64... > <738.689634> main: change delay -56... > <739.483454> main: alsa xrun: try to recover... > <739.496412> main: alsa xrun: recovered. > <739.496471> main: dev write = 0 > <739.523689> main: alsa xrun: try to recover... > <739.536418> main: alsa xrun: recovered. > <739.536509> main: dev write = 0 > > etc. etc. until I pressed ctrl-c in the wvdial terminal, which resulted in: > > <744.376836> hw:0,6: modem_tty_write: hangup... > <744.376929> hw:0,6: modem_hup... > <744.376957> hw:0,6: modem set state: 2 --> 9... > <744.376985> hw:0,6: new state: DP_DISC > <744.377174> main: termios changed. > <744.377208> hw:0,6: update termios... > <744.377238> main: pty closed. > <744.383186> hw:0,6: modem_stop.. > <744.383240> main: alsa_stop... > > > Again, all your help is much appreciated. > > ERin C. >
