RE: > http://linmodems.technion.ac.il/archive-seventh/msg00282.htm > it says "404 page not found" Use instead http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html Do the upgrade to 1.0.17 if the modem is still not shown by: $ cat /proc/asound/pcm We will file a bug report with ALSA if the modem card is not recognized under 1.0.17 MarvS On Thu, Jul 17, 2008 at 2:05 AM, roan <roan@xxxxxxxx> wrote: > i already upgraded to 1.0.16 ALSA version by upgrading my ubuntu 8.04(btw, > now it is 8.04.1) and nothing changed :( > > cannot load this page > http://linmodems.technion.ac.il/archive-seventh/msg00282.htm > it says "404 page not found" > > On Wed, 16 Jul 2008 19:38:20 -0400 > "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >> >> Roan, >> >> Follow >> Instructions for upgrading snd-hda-intel and its dependent driver set >> are at: http://linmodems.technion.ac.il/archive-seventh/msg00282.htm >> >> Upgrade to ALSA version 1.0.16. This has solved problems comparable >> to yours on other System. >> Reboot >> Recheck the >> $ cat /proc/asound/pcm >> >> MarvS >> >> On Wed, Jul 16, 2008 at 12:48 PM, roan <roan@xxxxxxxx> wrote: >>> >>> yes, audio is working >>> >>> >>> On Wed, 16 Jul 2008 10:55:58 -0400 >>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>> >>>> Roan >>>> >>>> Is audio working >>>> >>>> MarvS >>>> >>>> On Wed, Jul 16, 2008 at 10:21 AM, roan <roan@xxxxxxxx> wrote: >>>>> >>>>> it seems that blacklisting didn't help >>>>> $ sudo cat /proc/asound/pcm still says the same: >>>>> --------------- >>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>> --------------- >>>>> >>>>> On Mon, 14 Jul 2008 08:06:10 -0400 >>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>> >>>>>> Roan >>>>>> >>>>>> $ sudo cat /proc/asound/pcm >>>>>> The sudo probably isn't necessary. >>>>>> >>>>>> More later. Regulat job now >>>>>> >>>>>> MarvS >>>>>> >>>>>> On Mon, Jul 14, 2008 at 2:15 AM, roan <roan@xxxxxxxx> wrote: >>>>>>> >>>>>>> first of all i can say that the modem is working with kernel 2.6.21 >>>>>>> but i didn't succeed to make it work under my 2.6.24-19 >>>>>>> downloaded agrsm-20080626.tar.gz >>>>>>> tried to make install, but it says that some needed files are >>>>>>> missing. >>>>>>> don't >>>>>>> know which ones :( >>>>>>> >>>>>>> on another hand i blacklisted this list of modules you sent me in >>>>>>> file >>>>>>> /etc/modeprobe.d/blacklist >>>>>>> ------ >>>>>>> scsi_mod >>>>>>> ehci_hcd >>>>>>> uhci_hcd >>>>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>>>> >>>>>>> shpchp 34452 0 >>>>>>> >>>>>>> pci_hotplug 30880 1 shpchp >>>>>>> >>>>>>> pcspkr 4224 0 >>>>>>> >>>>>>> sr_mod 17956 1 >>>>>>> >>>>>>> cdrom 37408 1 sr_mod >>>>>>> >>>>>>> sd_mod 30720 4 >>>>>>> >>>>>>> pcmcia_core >>>>>>> >>>>>>> uvcvideo 58116 0 >>>>>>> >>>>>>> iwl3945 89844 0 >>>>>>> >>>>>>> compat_ioctl32 2304 1 uvcvideo >>>>>>> >>>>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>>>> >>>>>>> videodev 29440 1 uvcvideo >>>>>>> >>>>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>>>> >>>>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>>>> >>>>>>> video 19856 8 >>>>>>> >>>>>>> rfcomm 41744 2 >>>>>>> >>>>>>> l2cap 25728 13 rfcomm >>>>>>> >>>>>>> bluetooth 61156 4 rfcomm,l2cap >>>>>>> >>>>>>> snd_atiixp_modem 17672 0 >>>>>>> >>>>>>> snd_via82xx_modem 16392 0 >>>>>>> >>>>>>> snd_intel8x0m >>>>>>> ------ >>>>>>> but nothing changed: the $ /proc/asound/pcm still says "permission >>>>>>> denied" >>>>>>> or when i do it with sudo it says " no such file..." >>>>>>> >>>>>>> so please tell me what i need to do to make modem working on >>>>>>> 2.6.24-19 >>>>>>> kernel? >>>>>>> thx in advance >>>>>>> >>>>>>> >>>>>>> On Sat, 12 Jul 2008 09:41:01 -0400 >>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>> >>>>>>>> Bjorn, >>>>>>>> >>>>>>>> Would you please work with Roan, to get his >>>>>>>> CPU=i686, Ubuntu Linux version 2.6.24-18-generic , gcc version 4.2 >>>>>>>> with >>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>> ---------- --------- --------- -------------- >>>>>>>> 00:1b.0 8086:284b 1462:3fe9 Audio device: Intel >>>>>>>> Corporation 82801H >>>>>>>> having the 11c11040 Agere chip on Subsystem 1462:3fe9 >>>>>>>> >>>>>>>> Modem interrupt assignment and sharing: >>>>>>>> 21: 407 392 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel >>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>>>> [ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, >>>>>>>> low) -> IRQ 21 >>>>>>>> [ 34.842316] PCI: Setting latency timer of device 0000:00:1b.0 to >>>>>>>> 64 >>>>>>>> >>>>>>>> The ALSA verion is 1.0.15 >>>>>>>> >>>>>>>> The /proc/asound/pcm file reports: >>>>>>>> ----------------------- >>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>> --------------- >>>>>>>> but there is no expected Modem line, like >>>>>>>> 00-06: Something Modem >>>>>>>> so there is probably a resource conflict to be dealt with and/or an >>>>>>>> ALSA version upgradeto 1.0.16 may be necessary. >>>>>>>> >>>>>>>> Roan >>>>>>>> Detach any external devices which are not Essential (USB and PCMCIA >>>>>>>> etc.). >>>>>>>> or you can disable the usage through an edit in: >>>>>>>> $ sudo gedit /etc/discover.conf >>>>>>>> Of course you must retain ide and pci services >>>>>>>> >>>>>>>> You can also less globally blacklist non-essential modules, to free >>>>>>>> up >>>>>>>> resources. >>>>>>>> See >>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01842.html >>>>>>>> on blacklisting guidance. >>>>>>>> Modules non essential on your System for dialup include: >>>>>>>> scsi_mod needed for USB drivers >>>>>>>> ehci_hcd USB2 >>>>>>>> uhci_hcd other USB >>>>>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>>>>> shpchp 34452 0 >>>>>>>> pci_hotplug 30880 1 shpchp >>>>>>>> pcspkr 4224 0 >>>>>>>> sr_mod 17956 1 >>>>>>>> cdrom 37408 1 sr_mod >>>>>>>> sd_mod 30720 4 >>>>>>>> pcmcia_core >>>>>>>> uvcvideo 58116 0 >>>>>>>> iwl3945 89844 0 >>>>>>>> compat_ioctl32 2304 1 uvcvideo >>>>>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>>>>> videodev 29440 1 uvcvideo >>>>>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>>>>> video 19856 8 >>>>>>>> rfcomm 41744 2 >>>>>>>> l2cap 25728 13 rfcomm >>>>>>>> bluetooth 61156 4 rfcomm,l2cap >>>>>>>> snd_atiixp_modem 17672 0 >>>>>>>> snd_via82xx_modem 16392 0 >>>>>>>> snd_intel8x0m modem driver also, not for your HDA system >>>>>>>> >>>>>>>> Then after a reboot, do >>>>>>>> $ /proc/asound/pcm >>>>>>>> to assess if a modem line is present. >>>>>>>> >>>>>>>> Another fast thing you can try is from >>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get the >>>>>>>> agrsm_howto.txt and the linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb >>>>>>>> which already includes agrmodem + agrserial drivers. Install with: >>>>>>>> $ sudo dpkg -i linux-image*.deb >>>>>>>> Then reboot under the new 2.6.21.0-22 kernel and run through the >>>>>>>> tests >>>>>>>> described in agrsm_howto.txt, except compiling & driver installation >>>>>>>> is already done. >>>>>>>> While lacking this modem hardware, >>>>>>>> linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb did not cause any >>>>>>>> problems on my otherwise Ubuntu system. It is Debian repackaging of >>>>>>>> the Fedora like kernel-2.6.21.0-22.i686.rpm , which I did. >>>>>>>> >>>>>>>> Joern will direct you with respect to further getting service under >>>>>>>> 2.6.24 kernels. >>>>>>>> The current Mandiva Linux release with 2.4.26 kernels does have a >>>>>>>> package >>>>>>>> dkms-agrsm-2.1.80-2mdv2009.0.i586.rpm supporting the 11c11040 chip >>>>>>>> modem. >>>>>>>> >>>>>>>> MarvS >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Sat, Jul 12, 2008 at 8:05 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>> >>>>>>>>> from the driver information i found out that the device is 1040 >>>>>>>>> there is ven=11c1 and dev=1040 >>>>>>>>> here is the info from lsmod and dmesg >>>>>>>>> ========== >>>>>>>>> Module Size Used by >>>>>>>>> arc4 2944 2 >>>>>>>>> ecb 4480 2 >>>>>>>>> blkcipher 8324 1 ecb >>>>>>>>> nls_iso8859_1 4992 1 >>>>>>>>> nls_cp437 6656 1 >>>>>>>>> isofs 36388 1 >>>>>>>>> vfat 14464 1 >>>>>>>>> fat 54556 1 vfat >>>>>>>>> udf 88612 0 >>>>>>>>> af_packet 23812 6 >>>>>>>>> rfcomm 41744 2 >>>>>>>>> l2cap 25728 13 rfcomm >>>>>>>>> bluetooth 61156 4 rfcomm,l2cap >>>>>>>>> ipv6 267780 14 >>>>>>>>> ppdev 10372 0 >>>>>>>>> snd_atiixp_modem 17672 0 >>>>>>>>> snd_via82xx_modem 16392 0 >>>>>>>>> snd_intel8x0m 19084 0 >>>>>>>>> snd_ac97_codec 101156 3 >>>>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m >>>>>>>>> ac97_bus 3072 1 snd_ac97_codec >>>>>>>>> acpi_cpufreq 10796 1 >>>>>>>>> cpufreq_stats 7104 0 >>>>>>>>> cpufreq_conservative 8712 0 >>>>>>>>> cpufreq_ondemand 9740 1 >>>>>>>>> freq_table 5536 3 >>>>>>>>> acpi_cpufreq,cpufreq_stats,cpufreq_ondemand >>>>>>>>> cpufreq_userspace 5284 0 >>>>>>>>> cpufreq_powersave 2688 0 >>>>>>>>> sbs 15112 0 >>>>>>>>> sbshc 7680 1 sbs >>>>>>>>> container 5632 0 >>>>>>>>> dock 11280 0 >>>>>>>>> iptable_filter 3840 0 >>>>>>>>> ip_tables 14820 1 iptable_filter >>>>>>>>> x_tables 16132 1 ip_tables >>>>>>>>> coretemp 8448 0 >>>>>>>>> sbp2 24072 0 >>>>>>>>> parport_pc 36260 0 >>>>>>>>> lp 12324 0 >>>>>>>>> parport 37832 3 ppdev,parport_pc,lp >>>>>>>>> snd_hda_intel 351908 3 >>>>>>>>> snd_pcm_oss 42528 0 >>>>>>>>> snd_mixer_oss 18048 1 snd_pcm_oss >>>>>>>>> snd_pcm 78852 6 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss >>>>>>>>> snd_page_alloc 11656 5 >>>>>>>>> >>>>>>>>> >>>>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm >>>>>>>>> snd_hwdep 10628 1 snd_hda_intel >>>>>>>>> joydev 13120 0 >>>>>>>>> mmc_block 14980 1 >>>>>>>>> snd_seq_dummy 4996 0 >>>>>>>>> pcmcia 40876 0 >>>>>>>>> snd_seq_oss 35456 0 >>>>>>>>> snd_seq_midi 9504 0 >>>>>>>>> snd_rawmidi 25888 1 snd_seq_midi >>>>>>>>> uvcvideo 58116 0 >>>>>>>>> iwl3945 89844 0 >>>>>>>>> snd_seq_midi_event 8576 2 snd_seq_oss,snd_seq_midi >>>>>>>>> compat_ioctl32 2304 1 uvcvideo >>>>>>>>> iwlwifi_mac80211 219108 1 iwl3945 >>>>>>>>> snd_seq 54096 6 >>>>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >>>>>>>>> nvidia 7825536 36 >>>>>>>>> videodev 29440 1 uvcvideo >>>>>>>>> v4l1_compat 15492 2 uvcvideo,videodev >>>>>>>>> v4l2_common 18304 2 uvcvideo,videodev >>>>>>>>> video 19856 8 >>>>>>>>> psmouse 40336 0 >>>>>>>>> ac 6916 0 >>>>>>>>> sdhci 19076 0 >>>>>>>>> battery 14212 0 >>>>>>>>> snd_timer 24964 2 snd_pcm,snd_seq >>>>>>>>> cfg80211 15112 1 iwlwifi_mac80211 >>>>>>>>> i2c_core 24832 1 nvidia >>>>>>>>> output 4736 1 video >>>>>>>>> serio_raw 7940 0 >>>>>>>>> mmc_core 51460 2 mmc_block,sdhci >>>>>>>>> snd_seq_device 9740 5 >>>>>>>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >>>>>>>>> yenta_socket 27276 1 >>>>>>>>> rsrc_nonstatic 13696 1 yenta_socket >>>>>>>>> pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic >>>>>>>>> snd 56996 21 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>>>>>>>> evdev 13056 6 >>>>>>>>> button 9232 0 >>>>>>>>> iTCO_wdt 13092 0 >>>>>>>>> iTCO_vendor_support 4868 1 iTCO_wdt >>>>>>>>> intel_agp 25492 0 >>>>>>>>> agpgart 34760 2 nvidia,intel_agp >>>>>>>>> soundcore 8800 1 snd >>>>>>>>> shpchp 34452 0 >>>>>>>>> pci_hotplug 30880 1 shpchp >>>>>>>>> pcspkr 4224 0 >>>>>>>>> ext3 136712 1 >>>>>>>>> jbd 48404 1 ext3 >>>>>>>>> mbcache 9600 1 ext3 >>>>>>>>> sg 36880 0 >>>>>>>>> sr_mod 17956 1 >>>>>>>>> cdrom 37408 1 sr_mod >>>>>>>>> sd_mod 30720 4 >>>>>>>>> ata_generic 8324 0 >>>>>>>>> pata_acpi 8320 0 >>>>>>>>> usbhid 31872 0 >>>>>>>>> hid 38784 1 usbhid >>>>>>>>> ohci1394 33584 0 >>>>>>>>> ata_piix 19588 4 >>>>>>>>> ieee1394 93752 2 sbp2,ohci1394 >>>>>>>>> r8169 32900 0 >>>>>>>>> libata 159344 3 ata_generic,pata_acpi,ata_piix >>>>>>>>> scsi_mod 151436 5 sbp2,sg,sr_mod,sd_mod,libata >>>>>>>>> ehci_hcd 37900 0 >>>>>>>>> uhci_hcd 27024 0 >>>>>>>>> usbcore 146028 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd >>>>>>>>> thermal 16796 0 >>>>>>>>> processor 36872 4 acpi_cpufreq,thermal >>>>>>>>> fan 5636 0 >>>>>>>>> fuse 50580 5 >>>>>>>>> vesafb 8964 1 >>>>>>>>> fbcon 42912 72 >>>>>>>>> tileblit 3456 1 fbcon >>>>>>>>> font 9472 1 fbcon >>>>>>>>> bitblit 6784 1 fbcon >>>>>>>>> softcursor 3072 1 bitblit >>>>>>>>> [ 0.000000] Initializing cgroup subsys cpuset >>>>>>>>> [ 0.000000] Initializing cgroup subsys cpu >>>>>>>>> [ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) >>>>>>>>> (gcc >>>>>>>>> version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 >>>>>>>>> UTC >>>>>>>>> 2008 >>>>>>>>> (Ubuntu 2.6.24-18.32-generic) >>>>>>>>> [ 0.000000] BIOS-provided physical RAM map: >>>>>>>>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 >>>>>>>>> (usable) >>>>>>>>> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 >>>>>>>>> (usable) >>>>>>>>> [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 >>>>>>>>> (ACPI >>>>>>>>> data) >>>>>>>>> [ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007fff0000 >>>>>>>>> (ACPI >>>>>>>>> NVS) >>>>>>>>> [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 >>>>>>>>> (reserved) >>>>>>>>> [ 0.000000] 1151MB HIGHMEM available. >>>>>>>>> [ 0.000000] 896MB LOWMEM available. >>>>>>>>> [ 0.000000] found SMP MP-table at 000ff780 >>>>>>>>> [ 0.000000] Entering add_active_range(0, 0, 524208) 0 entries of >>>>>>>>> 256 >>>>>>>>> used >>>>>>>>> [ 0.000000] Zone PFN ranges: >>>>>>>>> [ 0.000000] DMA 0 -> 4096 >>>>>>>>> [ 0.000000] Normal 4096 -> 229376 >>>>>>>>> [ 0.000000] HighMem 229376 -> 524208 >>>>>>>>> [ 0.000000] Movable zone start PFN for each node >>>>>>>>> [ 0.000000] early_node_map[1] active PFN ranges >>>>>>>>> [ 0.000000] 0: 0 -> 524208 >>>>>>>>> [ 0.000000] On node 0 totalpages: 524208 >>>>>>>>> [ 0.000000] DMA zone: 32 pages used for memmap >>>>>>>>> [ 0.000000] DMA zone: 0 pages reserved >>>>>>>>> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 >>>>>>>>> [ 0.000000] Normal zone: 1760 pages used for memmap >>>>>>>>> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 >>>>>>>>> [ 0.000000] HighMem zone: 2303 pages used for memmap >>>>>>>>> [ 0.000000] HighMem zone: 292529 pages, LIFO batch:31 >>>>>>>>> [ 0.000000] Movable zone: 0 pages used for memmap >>>>>>>>> [ 0.000000] DMI present. >>>>>>>>> [ 0.000000] ACPI: RSDP signature @ 0xC00F84A0 checksum 0 >>>>>>>>> [ 0.000000] ACPI: RSDP 000F84A0, 0014 (r0 ACPIAM) >>>>>>>>> [ 0.000000] ACPI: RSDT 7FFB0000, 0040 (r1 MSI_NB MEGABOOK >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 051707 FACP1702 >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: DSDT 7FFB05B0, 5174 (r1 M1636 M1636000 >>>>>>>>> 0 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 0.000000] ACPI: FACS 7FFBE000, 0040 >>>>>>>>> [ 0.000000] ACPI: APIC 7FFB0390, 005C (r1 051707 APIC1702 >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: MCFG 7FFB03F0, 003C (r1 051707 OEMMCFG >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: SLIC 7FFB0430, 0176 (r1 MSI_NB MEGABOOK >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: OEMB 7FFBE040, 0071 (r1 051707 OEMB1702 >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: HPET 7FFB5730, 0038 (r1 051707 OEMHPET >>>>>>>>> 20070517 >>>>>>>>> MSFT >>>>>>>>> 97) >>>>>>>>> [ 0.000000] ACPI: SSDT 7FFBE940, 04E6 (r1 PmRef CpuPm 3000 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x808 >>>>>>>>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>>>>>>>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>>>>>>>> [ 0.000000] Processor #0 6:15 APIC version 20 >>>>>>>>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >>>>>>>>> [ 0.000000] Processor #1 6:15 APIC version 20 >>>>>>>>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] >>>>>>>>> gsi_base[0]) >>>>>>>>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address >>>>>>>>> 0xfec00000, >>>>>>>>> GSI >>>>>>>>> 0-23 >>>>>>>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl >>>>>>>>> dfl) >>>>>>>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >>>>>>>>> level) >>>>>>>>> [ 0.000000] ACPI: IRQ0 used by override. >>>>>>>>> [ 0.000000] ACPI: IRQ2 used by override. >>>>>>>>> [ 0.000000] ACPI: IRQ9 used by override. >>>>>>>>> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs >>>>>>>>> [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 >>>>>>>>> [ 0.000000] Using ACPI (MADT) for SMP configuration information >>>>>>>>> [ 0.000000] Allocating PCI resources starting at 88000000 (gap: >>>>>>>>> 80000000:7ee00000) >>>>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>>>> 000000000009f000 >>>>>>>>> - >>>>>>>>> 00000000000a0000 >>>>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>>>> 00000000000a0000 >>>>>>>>> - >>>>>>>>> 00000000000e0000 >>>>>>>>> [ 0.000000] swsusp: Registered nosave memory region: >>>>>>>>> 00000000000e0000 >>>>>>>>> - >>>>>>>>> 0000000000100000 >>>>>>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping >>>>>>>>> on. >>>>>>>>> Total >>>>>>>>> pages: 520113 >>>>>>>>> [ 0.000000] Kernel command line: >>>>>>>>> root=UUID=e20d8e3d-42fd-42cd-b239-9d9cc613cea1 ro splash vga=789 >>>>>>>>> quiet >>>>>>>>> [ 0.000000] mapped APIC to ffffb000 (fee00000) >>>>>>>>> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) >>>>>>>>> [ 0.000000] Enabling fast FPU save and restore... done. >>>>>>>>> [ 0.000000] Enabling unmasked SIMD FPU exception support... >>>>>>>>> done. >>>>>>>>> [ 0.000000] Initializing CPU#0 >>>>>>>>> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 >>>>>>>>> bytes) >>>>>>>>> [ 0.000000] Detected 1795.565 MHz processor. >>>>>>>>> [ 24.138347] Console: colour dummy device 80x25 >>>>>>>>> [ 24.138350] console [tty0] enabled >>>>>>>>> [ 24.138603] Dentry cache hash table entries: 131072 (order: 7, >>>>>>>>> 524288 >>>>>>>>> bytes) >>>>>>>>> [ 24.138876] Inode-cache hash table entries: 65536 (order: 6, >>>>>>>>> 262144 >>>>>>>>> bytes) >>>>>>>>> [ 24.226903] Memory: 2066816k/2096832k available (2176k kernel >>>>>>>>> code, >>>>>>>>> 28700k reserved, 1006k data, 368k init, 1179328k highmem) >>>>>>>>> [ 24.226909] virtual kernel memory layout: >>>>>>>>> [ 24.226910] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) >>>>>>>>> [ 24.226911] pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>>>>>>>> [ 24.226912] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >>>>>>>>> [ 24.226913] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >>>>>>>>> [ 24.226914] .init : 0xc0421000 - 0xc047d000 ( 368 kB) >>>>>>>>> [ 24.226915] .data : 0xc03201f4 - 0xc041bdc4 (1006 kB) >>>>>>>>> [ 24.226916] .text : 0xc0100000 - 0xc03201f4 (2176 kB) >>>>>>>>> [ 24.226919] Checking if this processor honours the WP bit even >>>>>>>>> in >>>>>>>>> supervisor mode... Ok. >>>>>>>>> [ 24.226957] SLUB: Genslabs=11, HWalign=64, Order=0-1, >>>>>>>>> MinObjects=4, >>>>>>>>> CPUs=2, Nodes=1 >>>>>>>>> [ 24.227097] hpet clockevent registered >>>>>>>>> [ 24.307060] Calibrating delay using timer specific routine.. >>>>>>>>> 3595.17 >>>>>>>>> BogoMIPS (lpj=7190350) >>>>>>>>> [ 24.307082] Security Framework initialized >>>>>>>>> [ 24.307088] SELinux: Disabled at boot. >>>>>>>>> [ 24.307100] AppArmor: AppArmor initialized >>>>>>>>> [ 24.307103] Failure registering capabilities with primary >>>>>>>>> security >>>>>>>>> module. >>>>>>>>> [ 24.307111] Mount-cache hash table entries: 512 >>>>>>>>> [ 24.307223] Initializing cgroup subsys ns >>>>>>>>> [ 24.307228] Initializing cgroup subsys cpuacct >>>>>>>>> [ 24.307237] CPU: After generic identify, caps: bfebfbff 20100000 >>>>>>>>> 00000000 >>>>>>>>> 00000000 0000e3bd 00000000 00000001 00000000 >>>>>>>>> [ 24.307244] monitor/mwait feature present. >>>>>>>>> [ 24.307246] using mwait in idle threads. >>>>>>>>> [ 24.307249] CPU: L1 I cache: 32K, L1 D cache: 32K >>>>>>>>> [ 24.307252] CPU: L2 cache: 2048K >>>>>>>>> [ 24.307254] CPU: Physical Processor ID: 0 >>>>>>>>> [ 24.307255] CPU: Processor Core ID: 0 >>>>>>>>> [ 24.307257] CPU: After all inits, caps: bfebfbff 20100000 >>>>>>>>> 00000000 >>>>>>>>> 00003940 0000e3bd 00000000 00000001 00000000 >>>>>>>>> [ 24.307266] Compat vDSO mapped to ffffe000. >>>>>>>>> [ 24.307278] Checking 'hlt' instruction... OK. >>>>>>>>> [ 24.323404] SMP alternatives: switching to UP code >>>>>>>>> [ 24.324901] Early unpacking initramfs... done >>>>>>>>> [ 24.643306] ACPI: Core revision 20070126 >>>>>>>>> [ 24.643345] ACPI: Looking for DSDT in initramfs... error, file >>>>>>>>> /DSDT.aml >>>>>>>>> not found. >>>>>>>>> [ 24.645804] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz >>>>>>>>> stepping >>>>>>>>> 0d >>>>>>>>> [ 24.645818] SMP alternatives: switching to SMP code >>>>>>>>> [ 24.646454] Booting processor 1/1 eip 3000 >>>>>>>>> [ 24.656641] Initializing CPU#1 >>>>>>>>> [ 24.734815] Calibrating delay using timer specific routine.. >>>>>>>>> 3590.98 >>>>>>>>> BogoMIPS (lpj=7181974) >>>>>>>>> [ 24.734821] CPU: After generic identify, caps: bfebfbff 20100000 >>>>>>>>> 00000000 >>>>>>>>> 00000000 0000e3bd 00000000 00000001 00000000 >>>>>>>>> [ 24.734826] monitor/mwait feature present. >>>>>>>>> [ 24.734829] CPU: L1 I cache: 32K, L1 D cache: 32K >>>>>>>>> [ 24.734830] CPU: L2 cache: 2048K >>>>>>>>> [ 24.734832] CPU: Physical Processor ID: 0 >>>>>>>>> [ 24.734833] CPU: Processor Core ID: 1 >>>>>>>>> [ 24.734835] CPU: After all inits, caps: bfebfbff 20100000 >>>>>>>>> 00000000 >>>>>>>>> 00003940 0000e3bd 00000000 00000001 00000000 >>>>>>>>> [ 24.735392] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz >>>>>>>>> stepping >>>>>>>>> 0d >>>>>>>>> [ 24.735413] Total of 2 processors activated (7186.16 BogoMIPS). >>>>>>>>> [ 24.735588] ENABLING IO-APIC IRQs >>>>>>>>> [ 24.735775] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >>>>>>>>> [ 24.882841] checking TSC synchronization [CPU#0 -> CPU#1]: >>>>>>>>> passed. >>>>>>>>> [ 24.902845] Brought up 2 CPUs >>>>>>>>> [ 24.902867] CPU0 attaching sched-domain: >>>>>>>>> [ 24.902869] domain 0: span 03 >>>>>>>>> [ 24.902871] groups: 01 02 >>>>>>>>> [ 24.902874] CPU1 attaching sched-domain: >>>>>>>>> [ 24.902875] domain 0: span 03 >>>>>>>>> [ 24.902877] groups: 02 01 >>>>>>>>> [ 24.903074] net_namespace: 64 bytes >>>>>>>>> [ 24.903085] Booting paravirtualized kernel on bare hardware >>>>>>>>> [ 24.903524] Time: 14:55:42 Date: 07/12/08 >>>>>>>>> [ 24.903549] NET: Registered protocol family 16 >>>>>>>>> [ 24.903721] EISA bus registered >>>>>>>>> [ 24.903725] ACPI: bus type pci registered >>>>>>>>> [ 24.903966] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last >>>>>>>>> bus=6 >>>>>>>>> [ 24.903968] PCI: Using configuration type 1 >>>>>>>>> [ 24.903970] Setting up standard PCI resources >>>>>>>>> [ 24.912870] ACPI: EC: Look up EC in DSDT >>>>>>>>> [ 24.915987] ACPI: Interpreter enabled >>>>>>>>> [ 24.915990] ACPI: (supports S0 S1 S3 S4 S5) >>>>>>>>> [ 24.916005] ACPI: Using IOAPIC for interrupt routing >>>>>>>>> [ 24.916251] Error attaching device data >>>>>>>>> [ 24.916288] Error attaching device data >>>>>>>>> [ 24.918045] ACPI: EC: non-query interrupt received, switching to >>>>>>>>> interrupt mode >>>>>>>>> [ 24.922776] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, >>>>>>>>> data >>>>>>>>> = >>>>>>>>> 0x62 >>>>>>>>> [ 24.922779] ACPI: EC: driver started in interrupt mode >>>>>>>>> [ 24.922875] ACPI: PCI Root Bridge [PCI0] (0000:00) >>>>>>>>> [ 24.923832] PCI quirk: region 0800-087f claimed by ICH6 >>>>>>>>> ACPI/GPIO/TCO >>>>>>>>> [ 24.923836] PCI quirk: region 0500-053f claimed by ICH6 GPIO >>>>>>>>> [ 24.925529] PCI: Transparent bridge - 0000:00:1e.0 >>>>>>>>> [ 24.925622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>>>>>>> [ 24.925751] ACPI: PCI Interrupt Routing Table >>>>>>>>> [\_SB_.PCI0.P0P2._PRT] >>>>>>>>> [ 24.925830] ACPI: PCI Interrupt Routing Table >>>>>>>>> [\_SB_.PCI0.P0P1._PRT] >>>>>>>>> [ 24.925930] ACPI: PCI Interrupt Routing Table >>>>>>>>> [\_SB_.PCI0.P0P7._PRT] >>>>>>>>> [ 24.926006] ACPI: PCI Interrupt Routing Table >>>>>>>>> [\_SB_.PCI0.P0P8._PRT] >>>>>>>>> [ 24.937763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.937874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) *0, disabled. >>>>>>>>> [ 24.937984] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938093] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 >>>>>>>>> *11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) *0, disabled. >>>>>>>>> [ 24.938311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938419] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 >>>>>>>>> 11 >>>>>>>>> 12 >>>>>>>>> 14 >>>>>>>>> 15) >>>>>>>>> [ 24.938649] Linux Plug and Play Support v0.97 (c) Adam Belay >>>>>>>>> [ 24.938676] pnp: PnP ACPI init >>>>>>>>> [ 24.938683] ACPI: bus type pnp registered >>>>>>>>> [ 24.940724] pnp: PnP ACPI: found 13 devices >>>>>>>>> [ 24.940726] ACPI: ACPI bus type pnp unregistered >>>>>>>>> [ 24.940730] PnPBIOS: Disabled by ACPI PNP >>>>>>>>> [ 24.940928] PCI: Using ACPI for IRQ routing >>>>>>>>> [ 24.940931] PCI: If a device doesn't work, try "pci=routeirq". >>>>>>>>> If >>>>>>>>> it >>>>>>>>> helps, post a report >>>>>>>>> [ 24.994683] NET: Registered protocol family 8 >>>>>>>>> [ 24.994685] NET: Registered protocol family 20 >>>>>>>>> [ 24.994716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >>>>>>>>> [ 24.994720] hpet0: 3 64-bit timers, 14318180 Hz >>>>>>>>> [ 24.995752] AppArmor: AppArmor Filesystem Enabled >>>>>>>>> [ 24.998674] Time: tsc clocksource has been installed. >>>>>>>>> [ 24.998681] Switched to high resolution mode on CPU 0 >>>>>>>>> [ 24.998786] Switched to high resolution mode on CPU 1 >>>>>>>>> [ 25.014660] system 00:01: iomem range 0xfed14000-0xfed19fff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014670] system 00:08: ioport range 0x400-0x41f has been >>>>>>>>> reserved >>>>>>>>> [ 25.014672] system 00:08: ioport range 0x4d0-0x4d1 has been >>>>>>>>> reserved >>>>>>>>> [ 25.014674] system 00:08: ioport range 0x800-0x87f has been >>>>>>>>> reserved >>>>>>>>> [ 25.014677] system 00:08: ioport range 0x500-0x53f has been >>>>>>>>> reserved >>>>>>>>> [ 25.014679] system 00:08: iomem range 0xfed1c000-0xfed1ffff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014682] system 00:08: iomem range 0xfed20000-0xfed3ffff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014684] system 00:08: iomem range 0xfed40000-0xfed8ffff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014690] system 00:0a: iomem range 0xfec00000-0xfec00fff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014693] system 00:0a: iomem range 0xfee00000-0xfee00fff >>>>>>>>> could >>>>>>>>> not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.014698] system 00:0b: iomem range 0xe0000000-0xefffffff has >>>>>>>>> been >>>>>>>>> reserved >>>>>>>>> [ 25.014703] system 00:0c: iomem range 0x0-0x9ffff could not be >>>>>>>>> reserved >>>>>>>>> [ 25.014706] system 00:0c: iomem range 0xc0000-0xcffff could not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.014708] system 00:0c: iomem range 0xe0000-0xfffff could not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.014711] system 00:0c: iomem range 0x100000-0x7fffffff could >>>>>>>>> not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.014713] system 00:0c: iomem range 0xfed90000-0xffffffff >>>>>>>>> could >>>>>>>>> not >>>>>>>>> be >>>>>>>>> reserved >>>>>>>>> [ 25.045096] PCI: Bridge: 0000:00:01.0 >>>>>>>>> [ 25.045099] IO window: c000-cfff >>>>>>>>> [ 25.045102] MEM window: fa000000-fe0fffff >>>>>>>>> [ 25.045105] PREFETCH window: d0000000-dfffffff >>>>>>>>> [ 25.045109] PCI: Bridge: 0000:00:1c.0 >>>>>>>>> [ 25.045110] IO window: disabled. >>>>>>>>> [ 25.045116] MEM window: disabled. >>>>>>>>> [ 25.045120] PREFETCH window: disabled. >>>>>>>>> [ 25.045126] PCI: Bridge: 0000:00:1c.3 >>>>>>>>> [ 25.045127] IO window: disabled. >>>>>>>>> [ 25.045133] MEM window: fe100000-fe1fffff >>>>>>>>> [ 25.045137] PREFETCH window: disabled. >>>>>>>>> [ 25.045143] PCI: Bridge: 0000:00:1c.4 >>>>>>>>> [ 25.045145] IO window: d000-dfff >>>>>>>>> [ 25.045151] MEM window: fe200000-fe2fffff >>>>>>>>> [ 25.045156] PREFETCH window: disabled. >>>>>>>>> [ 25.045169] PCI: Bus 6, cardbus bridge: 0000:05:04.0 >>>>>>>>> [ 25.045171] IO window: 0000e000-0000e0ff >>>>>>>>> [ 25.045175] IO window: 0000e400-0000e4ff >>>>>>>>> [ 25.045180] PREFETCH window: 88000000-8bffffff >>>>>>>>> [ 25.045185] MEM window: 8c000000-8fffffff >>>>>>>>> [ 25.045190] PCI: Bridge: 0000:00:1e.0 >>>>>>>>> [ 25.045193] IO window: e000-efff >>>>>>>>> [ 25.045199] MEM window: fe300000-febfffff >>>>>>>>> [ 25.045204] PREFETCH window: f7000000-f8ffffff >>>>>>>>> [ 25.045221] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 25.045225] PCI: Setting latency timer of device 0000:00:01.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.045249] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 25.045255] PCI: Setting latency timer of device 0000:00:1c.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.045280] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 17 >>>>>>>>> [ 25.045285] PCI: Setting latency timer of device 0000:00:1c.3 to >>>>>>>>> 64 >>>>>>>>> [ 25.045309] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 25.045315] PCI: Setting latency timer of device 0000:00:1c.4 to >>>>>>>>> 64 >>>>>>>>> [ 25.045329] PCI: Setting latency timer of device 0000:00:1e.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.045347] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 22 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 18 >>>>>>>>> [ 25.045360] NET: Registered protocol family 2 >>>>>>>>> [ 25.082645] IP route cache hash table entries: 32768 (order: 5, >>>>>>>>> 131072 >>>>>>>>> bytes) >>>>>>>>> [ 25.082845] TCP established hash table entries: 131072 (order: >>>>>>>>> 8, >>>>>>>>> 1048576 >>>>>>>>> bytes) >>>>>>>>> [ 25.083237] TCP bind hash table entries: 65536 (order: 7, 524288 >>>>>>>>> bytes) >>>>>>>>> [ 25.083430] TCP: Hash tables configured (established 131072 bind >>>>>>>>> 65536) >>>>>>>>> [ 25.083432] TCP reno registered >>>>>>>>> [ 25.094708] checking if image is initramfs... it is >>>>>>>>> [ 25.722077] Freeing initrd memory: 7319k freed >>>>>>>>> [ 25.722788] audit: initializing netlink socket (disabled) >>>>>>>>> [ 25.722801] audit(1215874543.369:1): initialized >>>>>>>>> [ 25.722995] highmem bounce pool size: 64 pages >>>>>>>>> [ 25.724776] VFS: Disk quotas dquot_6.5.1 >>>>>>>>> [ 25.724842] Dquot-cache hash table entries: 1024 (order 0, 4096 >>>>>>>>> bytes) >>>>>>>>> [ 25.724962] io scheduler noop registered >>>>>>>>> [ 25.724964] io scheduler anticipatory registered >>>>>>>>> [ 25.724965] io scheduler deadline registered >>>>>>>>> [ 25.724978] io scheduler cfq registered (default) >>>>>>>>> [ 25.725110] Boot video device is 0000:01:00.0 >>>>>>>>> [ 25.725211] PCI: Setting latency timer of device 0000:00:01.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.725249] assign_interrupt_mode Found MSI capability >>>>>>>>> [ 25.725279] Allocate Port Service[0000:00:01.0:pcie00] >>>>>>>>> [ 25.725312] Allocate Port Service[0000:00:01.0:pcie02] >>>>>>>>> [ 25.725388] PCI: Setting latency timer of device 0000:00:1c.0 to >>>>>>>>> 64 >>>>>>>>> [ 25.725449] assign_interrupt_mode Found MSI capability >>>>>>>>> [ 25.725497] Allocate Port Service[0000:00:1c.0:pcie00] >>>>>>>>> [ 25.725526] Allocate Port Service[0000:00:1c.0:pcie02] >>>>>>>>> [ 25.725626] PCI: Setting latency timer of device 0000:00:1c.3 to >>>>>>>>> 64 >>>>>>>>> [ 25.725687] assign_interrupt_mode Found MSI capability >>>>>>>>> [ 25.725734] Allocate Port Service[0000:00:1c.3:pcie00] >>>>>>>>> [ 25.725764] Allocate Port Service[0000:00:1c.3:pcie02] >>>>>>>>> [ 25.725864] PCI: Setting latency timer of device 0000:00:1c.4 to >>>>>>>>> 64 >>>>>>>>> [ 25.725924] assign_interrupt_mode Found MSI capability >>>>>>>>> [ 25.725972] Allocate Port Service[0000:00:1c.4:pcie00] >>>>>>>>> [ 25.726003] Allocate Port Service[0000:00:1c.4:pcie02] >>>>>>>>> [ 25.726246] isapnp: Scanning for PnP cards... >>>>>>>>> [ 26.081376] isapnp: No Plug & Play device found >>>>>>>>> [ 26.104263] Real Time Clock Driver v1.12ac >>>>>>>>> [ 26.104422] hpet_resources: 0xfed00000 is busy >>>>>>>>> [ 26.104462] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, >>>>>>>>> IRQ >>>>>>>>> sharing enabled >>>>>>>>> [ 26.105578] RAMDISK driver initialized: 16 RAM disks of 65536K >>>>>>>>> size >>>>>>>>> 1024 >>>>>>>>> blocksize >>>>>>>>> [ 26.105638] input: Macintosh mouse button emulation as >>>>>>>>> /devices/virtual/input/input0 >>>>>>>>> [ 26.105728] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at >>>>>>>>> 0x60,0x64 >>>>>>>>> irq 1,12 >>>>>>>>> [ 26.106070] i8042.c: Detected active multiplexing controller, >>>>>>>>> rev >>>>>>>>> 1.1. >>>>>>>>> [ 26.106147] serio: i8042 KBD port at 0x60,0x64 irq 1 >>>>>>>>> [ 26.106151] serio: i8042 AUX0 port at 0x60,0x64 irq 12 >>>>>>>>> [ 26.106153] serio: i8042 AUX1 port at 0x60,0x64 irq 12 >>>>>>>>> [ 26.106155] serio: i8042 AUX2 port at 0x60,0x64 irq 12 >>>>>>>>> [ 26.106157] serio: i8042 AUX3 port at 0x60,0x64 irq 12 >>>>>>>>> [ 26.134091] mice: PS/2 mouse device common for all mice >>>>>>>>> [ 26.134193] EISA: Probing bus 0 at eisa.0 >>>>>>>>> [ 26.134231] EISA: Detected 0 cards. >>>>>>>>> [ 26.134234] cpuidle: using governor ladder >>>>>>>>> [ 26.134235] cpuidle: using governor menu >>>>>>>>> [ 26.134311] NET: Registered protocol family 1 >>>>>>>>> [ 26.134336] Using IPI No-Shortcut mode >>>>>>>>> [ 26.134361] registered taskstats version 1 >>>>>>>>> [ 26.134462] Magic number: 0:283:940 >>>>>>>>> [ 26.134491] hash matches device ptyyb >>>>>>>>> [ 26.134525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >>>>>>>>> [ 26.134527] EDD information not available. >>>>>>>>> [ 26.134709] Freeing unused kernel memory: 368k freed >>>>>>>>> [ 26.137228] input: AT Translated Set 2 keyboard as >>>>>>>>> /devices/platform/i8042/serio0/input/input1 >>>>>>>>> [ 26.228218] vesafb: framebuffer at 0xfb000000, mapped to >>>>>>>>> 0xf8880000, >>>>>>>>> using 3750k, total 14336k >>>>>>>>> [ 26.228221] vesafb: mode is 800x600x32, linelength=3200, pages=1 >>>>>>>>> [ 26.228223] vesafb: protected mode interface info at c000:b230 >>>>>>>>> [ 26.228226] vesafb: pmi: set display start = c00cb293, set >>>>>>>>> palette >>>>>>>>> = >>>>>>>>> c00cb2ee >>>>>>>>> [ 26.228228] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 >>>>>>>>> 3c7 >>>>>>>>> 3c8 >>>>>>>>> 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da >>>>>>>>> [ 26.228240] vesafb: scrolling: redraw >>>>>>>>> [ 26.228242] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 >>>>>>>>> [ 26.228336] Console: switching to colour frame buffer device >>>>>>>>> 100x37 >>>>>>>>> [ 26.257461] fb0: VESA VGA frame buffer device >>>>>>>>> [ 27.394531] fuse init (API version 7.9) >>>>>>>>> [ 27.413176] ACPI: SSDT 7FFBE190, 0255 (r1 PmRef Cpu0Ist >>>>>>>>> 3000 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 27.413363] ACPI: SSDT 7FFBE480, 04B6 (r1 PmRef Cpu0Cst >>>>>>>>> 3001 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 27.413641] Monitor-Mwait will be used to enter C-1 state >>>>>>>>> [ 27.413644] Monitor-Mwait will be used to enter C-2 state >>>>>>>>> [ 27.413646] Monitor-Mwait will be used to enter C-3 state >>>>>>>>> [ 27.413754] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) >>>>>>>>> [ 27.413953] ACPI: SSDT 7FFBE0C0, 00C8 (r1 PmRef Cpu1Ist >>>>>>>>> 3000 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 27.414119] ACPI: SSDT 7FFBE3F0, 0085 (r1 PmRef Cpu1Cst >>>>>>>>> 3000 >>>>>>>>> INTL >>>>>>>>> 20051117) >>>>>>>>> [ 27.414607] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) >>>>>>>>> [ 27.416854] ACPI: Thermal Zone [THRM] (67 C) >>>>>>>>> [ 27.722830] usbcore: registered new interface driver usbfs >>>>>>>>> [ 27.722854] usbcore: registered new interface driver hub >>>>>>>>> [ 27.722880] usbcore: registered new device driver usb >>>>>>>>> [ 27.734151] USB Universal Host Controller Interface driver v3.0 >>>>>>>>> [ 27.734202] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 27.734213] PCI: Setting latency timer of device 0000:00:1a.0 to >>>>>>>>> 64 >>>>>>>>> [ 27.734217] uhci_hcd 0000:00:1a.0: UHCI Host Controller >>>>>>>>> [ 27.734416] uhci_hcd 0000:00:1a.0: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 1 >>>>>>>>> [ 27.734449] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 >>>>>>>>> [ 27.734574] usb usb1: configuration #1 chosen from 1 choice >>>>>>>>> [ 27.734596] hub 1-0:1.0: USB hub found >>>>>>>>> [ 27.734600] hub 1-0:1.0: 2 ports detected >>>>>>>>> [ 27.838143] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 19 >>>>>>>>> [ 27.838155] PCI: Setting latency timer of device 0000:00:1a.1 to >>>>>>>>> 64 >>>>>>>>> [ 27.838160] uhci_hcd 0000:00:1a.1: UHCI Host Controller >>>>>>>>> [ 27.838183] uhci_hcd 0000:00:1a.1: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 2 >>>>>>>>> [ 27.838215] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000b880 >>>>>>>>> [ 27.838318] usb usb2: configuration #1 chosen from 1 choice >>>>>>>>> [ 27.838340] hub 2-0:1.0: USB hub found >>>>>>>>> [ 27.838345] hub 2-0:1.0: 2 ports detected >>>>>>>>> [ 27.845899] SCSI subsystem initialized >>>>>>>>> [ 27.864429] libata version 3.00 loaded. >>>>>>>>> [ 27.942108] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 20 >>>>>>>>> [ 27.942119] PCI: Setting latency timer of device 0000:00:1d.0 to >>>>>>>>> 64 >>>>>>>>> [ 27.942124] uhci_hcd 0000:00:1d.0: UHCI Host Controller >>>>>>>>> [ 27.942146] uhci_hcd 0000:00:1d.0: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 3 >>>>>>>>> [ 27.942178] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b800 >>>>>>>>> [ 27.942286] usb usb3: configuration #1 chosen from 1 choice >>>>>>>>> [ 27.942308] hub 3-0:1.0: USB hub found >>>>>>>>> [ 27.942313] hub 3-0:1.0: 2 ports detected >>>>>>>>> [ 28.046044] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 17 >>>>>>>>> [ 28.046055] PCI: Setting latency timer of device 0000:00:1d.1 to >>>>>>>>> 64 >>>>>>>>> [ 28.046059] uhci_hcd 0000:00:1d.1: UHCI Host Controller >>>>>>>>> [ 28.046082] uhci_hcd 0000:00:1d.1: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 4 >>>>>>>>> [ 28.046114] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b480 >>>>>>>>> [ 28.046220] usb usb4: configuration #1 chosen from 1 choice >>>>>>>>> [ 28.046242] hub 4-0:1.0: USB hub found >>>>>>>>> [ 28.046246] hub 4-0:1.0: 2 ports detected >>>>>>>>> [ 28.152987] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 21 >>>>>>>>> [ 28.152998] PCI: Setting latency timer of device 0000:00:1d.2 to >>>>>>>>> 64 >>>>>>>>> [ 28.153003] uhci_hcd 0000:00:1d.2: UHCI Host Controller >>>>>>>>> [ 28.153025] uhci_hcd 0000:00:1d.2: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 5 >>>>>>>>> [ 28.153057] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000b400 >>>>>>>>> [ 28.153166] usb usb5: configuration #1 chosen from 1 choice >>>>>>>>> [ 28.153188] hub 5-0:1.0: USB hub found >>>>>>>>> [ 28.153192] hub 5-0:1.0: 2 ports detected >>>>>>>>> [ 28.256965] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 21 >>>>>>>>> [ 28.256978] PCI: Setting latency timer of device 0000:00:1a.7 to >>>>>>>>> 64 >>>>>>>>> [ 28.256982] ehci_hcd 0000:00:1a.7: EHCI Host Controller >>>>>>>>> [ 28.257007] ehci_hcd 0000:00:1a.7: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 6 >>>>>>>>> [ 28.260906] ehci_hcd 0000:00:1a.7: debug port 1 >>>>>>>>> [ 28.260913] PCI: cache line size of 32 is not supported by >>>>>>>>> device >>>>>>>>> 0000:00:1a.7 >>>>>>>>> [ 28.260919] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf9fffc00 >>>>>>>>> [ 28.273820] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, >>>>>>>>> driver >>>>>>>>> 10 >>>>>>>>> Dec 2004 >>>>>>>>> [ 28.273924] usb usb6: configuration #1 chosen from 1 choice >>>>>>>>> [ 28.273948] hub 6-0:1.0: USB hub found >>>>>>>>> [ 28.273953] hub 6-0:1.0: 4 ports detected >>>>>>>>> [ 28.377905] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 20 >>>>>>>>> [ 28.377923] PCI: Setting latency timer of device 0000:00:1d.7 to >>>>>>>>> 64 >>>>>>>>> [ 28.377928] ehci_hcd 0000:00:1d.7: EHCI Host Controller >>>>>>>>> [ 28.377961] ehci_hcd 0000:00:1d.7: new USB bus registered, >>>>>>>>> assigned >>>>>>>>> bus >>>>>>>>> number 7 >>>>>>>>> [ 28.381881] ehci_hcd 0000:00:1d.7: debug port 1 >>>>>>>>> [ 28.381887] PCI: cache line size of 32 is not supported by >>>>>>>>> device >>>>>>>>> 0000:00:1d.7 >>>>>>>>> [ 28.381893] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf9fff800 >>>>>>>>> [ 28.392765] usb 4-2: new low speed USB device using uhci_hcd and >>>>>>>>> address >>>>>>>>> 2 >>>>>>>>> [ 28.400757] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, >>>>>>>>> driver >>>>>>>>> 10 >>>>>>>>> Dec 2004 >>>>>>>>> [ 28.400897] usb usb7: configuration #1 chosen from 1 choice >>>>>>>>> [ 28.400919] hub 7-0:1.0: USB hub found >>>>>>>>> [ 28.400924] hub 7-0:1.0: 6 ports detected >>>>>>>>> [ 28.504839] ACPI: PCI Interrupt 0000:05:04.4[A] -> GSI 22 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 18 >>>>>>>>> [ 28.555603] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] >>>>>>>>> MMIO=[fe3fd000-fe3fd7ff] Max Packet=[2048] IR/IT contexts=[8/8] >>>>>>>>> [ 28.558719] r8169 Gigabit Ethernet driver 2.2LK loaded >>>>>>>>> [ 28.558776] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 28.558818] PCI: Setting latency timer of device 0000:04:00.0 to >>>>>>>>> 64 >>>>>>>>> [ 28.559325] eth0: RTL8168b/8111b at 0xf8c44000, >>>>>>>>> 00:19:db:3b:be:ed, >>>>>>>>> XID >>>>>>>>> 38000000 IRQ 219 >>>>>>>>> [ 28.848496] Clocksource tsc unstable (delta = -3284221791 ns) >>>>>>>>> [ 28.852488] Time: hpet clocksource has been installed. >>>>>>>>> [ 28.881456] usb 7-5: new high speed USB device using ehci_hcd >>>>>>>>> and >>>>>>>>> address >>>>>>>>> 3 >>>>>>>>> [ 29.020706] usb 7-5: configuration #1 chosen from 1 choice >>>>>>>>> [ 29.178496] ata_piix 0000:00:1f.2: version 2.12 >>>>>>>>> [ 29.178505] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] >>>>>>>>> [ 29.186100] usb 4-2: new low speed USB device using uhci_hcd and >>>>>>>>> address >>>>>>>>> 3 >>>>>>>>> [ 29.199959] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 21 >>>>>>>>> [ 29.200001] PCI: Setting latency timer of device 0000:00:1f.2 to >>>>>>>>> 64 >>>>>>>>> [ 29.200144] scsi0 : ata_piix >>>>>>>>> [ 29.200386] scsi1 : ata_piix >>>>>>>>> [ 29.201521] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma >>>>>>>>> 0xffa0 >>>>>>>>> irq >>>>>>>>> 14 >>>>>>>>> [ 29.201524] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma >>>>>>>>> 0xffa8 >>>>>>>>> irq >>>>>>>>> 15 >>>>>>>>> [ 29.213016] usb 4-2: configuration #1 chosen from 1 choice >>>>>>>>> [ 29.232150] usbcore: registered new interface driver hiddev >>>>>>>>> [ 29.237144] input: A4Tech PS/2+USB Mouse as >>>>>>>>> /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input2 >>>>>>>>> [ 29.244652] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB >>>>>>>>> Mouse] >>>>>>>>> on >>>>>>>>> usb-0000:00:1d.1-2 >>>>>>>>> [ 29.244671] usbcore: registered new interface driver usbhid >>>>>>>>> [ 29.244676] >>>>>>>>> /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: >>>>>>>>> v2.6:USB HID core driver >>>>>>>>> [ 29.271950] ieee1394: Host added: ID:BUS[0-00:1023] >>>>>>>>> GUID[00dc10003a871c01] >>>>>>>>> [ 29.297935] ata1.00: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max >>>>>>>>> UDMA/133 >>>>>>>>> [ 29.297941] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ >>>>>>>>> (depth >>>>>>>>> 0/32) >>>>>>>>> [ 29.299183] ata1.00: configured for UDMA/133 >>>>>>>>> [ 29.347379] ata2.01: ATAPI: Optiarc DVD RW AD-7530A, EX32, max >>>>>>>>> UDMA/33 >>>>>>>>> [ 29.363736] ata2.01: configured for UDMA/33 >>>>>>>>> [ 29.363918] scsi 0:0:0:0: Direct-Access ATA WDC >>>>>>>>> WD1600BEVS-0 >>>>>>>>> 04.0 >>>>>>>>> PQ: 0 ANSI: 5 >>>>>>>>> [ 29.364680] scsi 1:0:1:0: CD-ROM Optiarc DVD RW >>>>>>>>> AD-7530A >>>>>>>>> EX32 >>>>>>>>> PQ: 0 ANSI: 5 >>>>>>>>> [ 29.375749] Driver 'sd' needs updating - please use bus_type >>>>>>>>> methods >>>>>>>>> [ 29.375816] sd 0:0:0:0: [sda] 312581808 512-byte hardware >>>>>>>>> sectors >>>>>>>>> (160042 >>>>>>>>> MB) >>>>>>>>> [ 29.375827] sd 0:0:0:0: [sda] Write Protect is off >>>>>>>>> [ 29.375830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>>>>> [ 29.375845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>>>>>>> enabled, >>>>>>>>> doesn't support DPO or FUA >>>>>>>>> [ 29.375891] sd 0:0:0:0: [sda] 312581808 512-byte hardware >>>>>>>>> sectors >>>>>>>>> (160042 >>>>>>>>> MB) >>>>>>>>> [ 29.375900] sd 0:0:0:0: [sda] Write Protect is off >>>>>>>>> [ 29.375902] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>>>>> [ 29.375918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>>>>>>> enabled, >>>>>>>>> doesn't support DPO or FUA >>>>>>>>> [ 29.375921] sda:<4>Driver 'sr' needs updating - please use >>>>>>>>> bus_type >>>>>>>>> methods >>>>>>>>> [ 29.416876] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > >>>>>>>>> [ 29.448097] sd 0:0:0:0: [sda] Attached SCSI disk >>>>>>>>> [ 29.451456] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw >>>>>>>>> xa/form2 >>>>>>>>> cdda tray >>>>>>>>> [ 29.451460] Uniform CD-ROM driver Revision: 3.20 >>>>>>>>> [ 29.451503] sr 1:0:1:0: Attached scsi CD-ROM sr0 >>>>>>>>> [ 29.453330] sd 0:0:0:0: Attached scsi generic sg0 type 0 >>>>>>>>> [ 29.453348] sr 1:0:1:0: Attached scsi generic sg1 type 5 >>>>>>>>> [ 29.984062] Attempting manual resume >>>>>>>>> [ 29.984065] swsusp: Resume From Partition 8:5 >>>>>>>>> [ 29.984067] PM: Checking swsusp image. >>>>>>>>> [ 29.984307] PM: Resume from disk failed. >>>>>>>>> [ 30.020273] kjournald starting. Commit interval 5 seconds >>>>>>>>> [ 30.020310] EXT3-fs: mounted filesystem with ordered data mode. >>>>>>>>> [ 39.106307] input: PC Speaker as >>>>>>>>> /devices/platform/pcspkr/input/input3 >>>>>>>>> [ 39.182164] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>>>>>>>> [ 39.214162] shpchp: Standard Hot Plug PCI Controller Driver >>>>>>>>> version: >>>>>>>>> 0.4 >>>>>>>>> [ 39.314029] Linux agpgart interface v0.102 >>>>>>>>> [ 39.344769] iTCO_vendor_support: vendor-support=0 >>>>>>>>> [ 39.356145] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 >>>>>>>>> (26-Jul-2007) >>>>>>>>> [ 39.356213] iTCO_wdt: Found a ICH8M TCO device (Version=2, >>>>>>>>> TCOBASE=0x0860) >>>>>>>>> [ 39.356253] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >>>>>>>>> [ 39.376103] input: Power Button (FF) as >>>>>>>>> /devices/virtual/input/input4 >>>>>>>>> [ 39.397945] ACPI: Power Button (FF) [PWRF] >>>>>>>>> [ 39.398024] input: Lid Switch as /devices/virtual/input/input5 >>>>>>>>> [ 39.398442] ACPI: Lid Switch [LID0] >>>>>>>>> [ 39.398525] input: Power Button (CM) as >>>>>>>>> /devices/virtual/input/input6 >>>>>>>>> [ 39.420942] ACPI: Power Button (CM) [PWRB] >>>>>>>>> [ 40.062138] Yenta: CardBus bridge found at 0000:05:04.0 >>>>>>>>> [1462:3fe9] >>>>>>>>> [ 40.062165] Yenta O2: res at 0x94/0xD4: 00/ea >>>>>>>>> [ 40.062167] Yenta O2: enabling read prefetch/write burst >>>>>>>>> [ 40.190436] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 >>>>>>>>> [ 40.190441] Socket status: 30000006 >>>>>>>>> [ 40.190443] Yenta: Raising subordinate bus# of parent bus (#05) >>>>>>>>> from >>>>>>>>> #06 >>>>>>>>> to #09 >>>>>>>>> [ 40.190448] pcmcia: parent PCI bridge I/O window: 0xe000 - >>>>>>>>> 0xefff >>>>>>>>> [ 40.190450] cs: IO port probe 0xe000-0xefff: clean. >>>>>>>>> [ 40.190687] pcmcia: parent PCI bridge Memory window: 0xfe300000 >>>>>>>>> - >>>>>>>>> 0xfebfffff >>>>>>>>> [ 40.190689] pcmcia: parent PCI bridge Memory window: 0xf7000000 >>>>>>>>> - >>>>>>>>> 0xf8ffffff >>>>>>>>> [ 40.509499] ACPI: Battery Slot [BAT1] (battery absent) >>>>>>>>> [ 40.525446] sdhci: Secure Digital Host Controller Interface >>>>>>>>> driver >>>>>>>>> [ 40.525449] sdhci: Copyright(c) Pierre Ossman >>>>>>>>> [ 40.525490] sdhci: SDHCI controller found at 0000:05:04.2 >>>>>>>>> [1217:7120] >>>>>>>>> (rev 2) >>>>>>>>> [ 40.525517] ACPI: PCI Interrupt 0000:05:04.2[A] -> GSI 22 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 18 >>>>>>>>> [ 40.525535] sdhci:slot0: Unknown controller version (2). You may >>>>>>>>> experience problems. >>>>>>>>> [ 40.525590] mmc0: SDHCI at 0xfe3ffc00 irq 18 DMA >>>>>>>>> [ 40.530106] ACPI: AC Adapter [ADP1] (on-line) >>>>>>>>> [ 40.584449] input: Video Bus as >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7 >>>>>>>>> [ 40.626708] mmc0: new high speed SD card at address b368 >>>>>>>>> [ 40.626724] Linux video capture interface: v2.00 >>>>>>>>> [ 40.633956] ACPI: Video Device [NVGA] (multi-head: yes rom: no >>>>>>>>> post: >>>>>>>>> no) >>>>>>>>> [ 40.650802] nvidia: module license 'NVIDIA' taints kernel. >>>>>>>>> [ 40.905503] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 16 >>>>>>>>> [ 40.905517] PCI: Setting latency timer of device 0000:01:00.0 to >>>>>>>>> 64 >>>>>>>>> [ 40.905638] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 >>>>>>>>> Thu >>>>>>>>> Feb >>>>>>>>> 14 17:53:07 PST 2008 >>>>>>>>> [ 41.107933] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network >>>>>>>>> Connection >>>>>>>>> driver for Linux, 1.2.0 >>>>>>>>> [ 41.107937] iwl3945: Copyright(c) 2003-2007 Intel Corporation >>>>>>>>> [ 41.108046] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 17 >>>>>>>>> [ 41.108067] PCI: Setting latency timer of device 0000:03:00.0 to >>>>>>>>> 64 >>>>>>>>> [ 41.108094] iwl3945: Detected Intel PRO/Wireless 3945ABG Network >>>>>>>>> Connection >>>>>>>>> [ 41.113192] uvcvideo: Found UVC 1.00 device USB 2.0 Camera >>>>>>>>> (0c45:62c0) >>>>>>>>> [ 41.157982] usbcore: registered new interface driver uvcvideo >>>>>>>>> [ 41.157987] USB Video Class driver (v0.1.0) >>>>>>>>> [ 41.163654] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, >>>>>>>>> caps: >>>>>>>>> 0xa04713/0x10008 >>>>>>>>> [ 41.205402] input: SynPS/2 Synaptics TouchPad as >>>>>>>>> /devices/platform/i8042/serio4/input/input8 >>>>>>>>> [ 41.527140] mmcblk0: mmc0:b368 SMI 124160KiB >>>>>>>>> [ 41.527171] mmcblk0: unknown partition table >>>>>>>>> [ 41.548058] iwl3945: Radio Frequency Kill Switch is On: >>>>>>>>> [ 41.548060] Kill switch must be turned off for wireless >>>>>>>>> networking >>>>>>>>> to >>>>>>>>> work. >>>>>>>>> [ 41.552637] iwl3945: WARNING: Requesting MAC access during >>>>>>>>> RFKILL >>>>>>>>> wakes >>>>>>>>> up NIC >>>>>>>>> [ 41.562730] iwl3945: WARNING: Requesting MAC access during >>>>>>>>> RFKILL >>>>>>>>> wakes >>>>>>>>> up NIC >>>>>>>>> [ 41.582688] iwl3945: WARNING: Requesting MAC access during >>>>>>>>> RFKILL >>>>>>>>> wakes >>>>>>>>> up NIC >>>>>>>>> [ 41.612899] iwl3945: WARNING: Requesting MAC access during >>>>>>>>> RFKILL >>>>>>>>> wakes >>>>>>>>> up NIC >>>>>>>>> [ 41.632896] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a >>>>>>>>> channels >>>>>>>>> [ 41.673310] cs: IO port probe 0x100-0x3af: clean. >>>>>>>>> [ 41.675403] cs: IO port probe 0x3e0-0x4ff: clean. >>>>>>>>> [ 41.676206] cs: IO port probe 0x820-0x8ff: clean. >>>>>>>>> [ 41.676648] cs: IO port probe 0xc00-0xcf7: clean. >>>>>>>>> [ 41.677543] cs: IO port probe 0xa00-0xaff: clean. >>>>>>>>> [ 41.951205] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 >>>>>>>>> (level, >>>>>>>>> low) >>>>>>>>> -> >>>>>>>>> IRQ 19 >>>>>>>>> [ 41.951224] PCI: Setting latency timer of device 0000:00:1b.0 to >>>>>>>>> 64 >>>>>>>>> [ 41.959807] hda_codec: Unknown model for ALC883, trying >>>>>>>>> auto-probe >>>>>>>>> from >>>>>>>>> BIOS... >>>>>>>>> [ 42.148966] lp: driver loaded but no devices found >>>>>>>>> [ 42.292437] Adding 4198396k swap on /dev/sda5. Priority:-1 >>>>>>>>> extents:1 >>>>>>>>> across:4198396k >>>>>>>>> [ 42.718838] EXT3 FS on sda6, internal journal >>>>>>>>> [ 43.959928] ip_tables: (C) 2000-2006 Netfilter Core Team >>>>>>>>> [ 44.382509] No dock devices found. >>>>>>>>> [ 46.545179] apm: BIOS not found. >>>>>>>>> [ 46.658069] ppdev: user-space parallel port driver >>>>>>>>> [ 46.791061] audit(1215863779.828:2): type=1503 >>>>>>>>> operation="inode_permission" requested_mask="a::" denied_mask="a::" >>>>>>>>> name="/dev/tty" pid=5516 profile="/usr/sbin/cupsd" >>>>>>>>> namespace="default" >>>>>>>>> [ 48.952388] NET: Registered protocol family 10 >>>>>>>>> [ 48.952852] lo: Disabled Privacy Extensions >>>>>>>>> [ 50.404479] Bluetooth: Core ver 2.11 >>>>>>>>> [ 50.404858] NET: Registered protocol family 31 >>>>>>>>> [ 50.404864] Bluetooth: HCI device and connection manager >>>>>>>>> initialized >>>>>>>>> [ 50.404871] Bluetooth: HCI socket layer initialized >>>>>>>>> [ 50.471186] Bluetooth: L2CAP ver 2.9 >>>>>>>>> [ 50.471195] Bluetooth: L2CAP socket layer initialized >>>>>>>>> [ 50.569202] Bluetooth: RFCOMM socket layer initialized >>>>>>>>> [ 50.569223] Bluetooth: RFCOMM TTY layer initialized >>>>>>>>> [ 50.569227] Bluetooth: RFCOMM ver 1.8 >>>>>>>>> [ 50.775034] r8169: eth0: link up >>>>>>>>> [ 52.174818] NET: Registered protocol family 17 >>>>>>>>> [ 65.454676] CPU0 attaching NULL sched-domain. >>>>>>>>> [ 65.454687] CPU1 attaching NULL sched-domain. >>>>>>>>> [ 65.459351] CPU0 attaching sched-domain: >>>>>>>>> [ 65.459362] domain 0: span 03 >>>>>>>>> [ 65.459367] groups: 01 02 >>>>>>>>> [ 65.459373] CPU1 attaching sched-domain: >>>>>>>>> [ 65.459377] domain 0: span 03 >>>>>>>>> [ 65.459380] groups: 02 01 >>>>>>>>> [ 73.153942] UDF-fs: No VRS found >>>>>>>>> [ 73.178375] ISO 9660 Extensions: Microsoft Joliet Level 3 >>>>>>>>> [ 73.389942] ISOFS: changing to secondary root >>>>>>>>> [ 76.466197] atkbd.c: Unknown key pressed (translated set 2, code >>>>>>>>> 0xf6 >>>>>>>>> on >>>>>>>>> isa0060/serio0). >>>>>>>>> [ 76.466209] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it >>>>>>>>> known. >>>>>>>>> [ 76.566510] atkbd.c: Unknown key released (translated set 2, >>>>>>>>> code >>>>>>>>> 0xf6 >>>>>>>>> on >>>>>>>>> isa0060/serio0). >>>>>>>>> [ 76.566519] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it >>>>>>>>> known. >>>>>>>>> [ 76.671452] wmaster0: Selected rate control algorithm >>>>>>>>> 'iwl-3945-rs' >>>>>>>>> [ 76.874415] ADDRCONF(NETDEV_UP): wlan0: link is not ready >>>>>>>>> [ 81.572469] NETDEV WATCHDOG: eth0: transmit timed out >>>>>>>>> [ 81.845751] r8169: eth0: link up >>>>>>>>> [ 92.756596] NETDEV WATCHDOG: eth0: transmit timed out >>>>>>>>> [ 93.049381] r8169: eth0: link up >>>>>>>>> [ 97.659156] wlan0: Initial auth_alg=0 >>>>>>>>> [ 97.659168] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>>>> [ 97.661681] wlan0: Initial auth_alg=0 >>>>>>>>> [ 97.661690] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>>>> [ 97.662510] wlan0: Initial auth_alg=0 >>>>>>>>> [ 97.662518] wlan0: authenticate with AP 00:02:6f:45:59:71 >>>>>>>>> [ 97.671569] wlan0: RX authentication from 00:02:6f:45:59:71 >>>>>>>>> (alg=0 >>>>>>>>> transaction=2 status=0) >>>>>>>>> [ 97.671581] wlan0: authenticated >>>>>>>>> [ 97.671586] wlan0: associate with AP 00:02:6f:45:59:71 >>>>>>>>> [ 97.674286] wlan0: authentication frame received from >>>>>>>>> 00:02:6f:45:59:71, >>>>>>>>> but not in authenticate state - ignored >>>>>>>>> [ 97.675732] wlan0: authentication frame received from >>>>>>>>> 00:02:6f:45:59:71, >>>>>>>>> but not in authenticate state - ignored >>>>>>>>> [ 97.679234] wlan0: RX AssocResp from 00:02:6f:45:59:71 >>>>>>>>> (capab=0x1 >>>>>>>>> status=0 aid=11) >>>>>>>>> [ 97.679245] wlan0: associated >>>>>>>>> [ 97.683747] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready >>>>>>>>> [ 98.781032] wlan0: no IPv6 routers present >>>>>>>>> ========== >>>>>>>>> On Fri, 11 Jul 2008 08:12:41 -0400 >>>>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>> >>>>>>>>>> RE: modem is Agere Systems HDA Modem >>>>>>>>>> Roan from the Details tab of the Driver information, the Device >>>>>>>>>> information is needed >>>>>>>>>> 11C1 is the Agere Vendor designation, Likely the Device is either >>>>>>>>>> 1040 >>>>>>>>>> or 3026, which need entirely different support. >>>>>>>>>> >>>>>>>>>> Also please do >>>>>>>>>> $ lsmod >> roan.txt >>>>>>>>>> $ dmesg >> roan.txt >>>>>>>>>> and send us the roan.txt >>>>>>>>>> >>>>>>>>>> Is the Audio functioning? >>>>>>>>>> >>>>>>>>>> MarvS >>>>>>>>>> >>>>>>>>>> On Fri, Jul 11, 2008 at 2:36 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>>>> >>>>>>>>>>> my modem is Agere Systems HDA Modem >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Thu, 10 Jul 2008 17:59:04 -0400 >>>>>>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Roan, >>>>>>>>>>>> >>>>>>>>>>>> I presume your modem is internal and Not one of >>>>>>>>>>>> Attached USB devices: >>>>>>>>>>>> ID 09da:000a A4 Tech Co., Ltd >>>>>>>>>>>> ID 0c45:62c0 Microdia. >>>>>>>>>>>> >>>>>>>>>>>> Read the Softmodem.txt for instructions for doing modem >>>>>>>>>>>> diagnositcs >>>>>>>>>>>> under Microsoft. >>>>>>>>>>>> >>>>>>>>>>>> MarvS >>>>>>>>>>>> >>>>>>>>>>>> On Thu, Jul 10, 2008 at 1:07 PM, roan <roan@xxxxxxxx> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> thx for an answer, Marvin >>>>>>>>>>>>> i did all as you said, but $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>> now >>>>>>>>>>>>> says >>>>>>>>>>>>> this: >>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>> Editing `/etc/wvdial.conf'. >>>>>>>>>>>>> >>>>>>>>>>>>> Scanning your serial ports for a modem. >>>>>>>>>>>>> >>>>>>>>>>>>> Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a >>>>>>>>>>>>> link >>>>>>>>>>>>> to >>>>>>>>>>>>> it. >>>>>>>>>>>>> Modem Port Scan<*1>: SHSF0 S0 S1 S2 S3 SHSF1 SHSF2 >>>>>>>>>>>>> SHSF3 >>>>>>>>>>>>> Modem Port Scan<*1>: SHSF4 SHSF5 SHSF6 SHSF7 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Sorry, no modem was detected! Is it in use by another program? >>>>>>>>>>>>> Did you configure it properly with setserial? >>>>>>>>>>>>> >>>>>>>>>>>>> what alse should i do? >>>>>>>>>>>>> thx in advance >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, 10 Jul 2008 07:45:02 -0400 >>>>>>>>>>>>> "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Roan >>>>>>>>>>>>>> >>>>>>>>>>>>>> Your most likely situation is: >>>>>>>>>>>>>> >>>>>>>>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in >>>>>>>>>>>>>> their >>>>>>>>>>>>>> Subsystem, >>>>>>>>>>>>>> and many are supported by the ALSA audio+modem driver >>>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>>> A modem was not detected on HDA card 8086:284b. >>>>>>>>>>>>>> If another modem card is present, then most likely 8086:284b >>>>>>>>>>>>>> does >>>>>>>>>>>>>> not >>>>>>>>>>>>>> host a modem. >>>>>>>>>>>>>> If another modem card has not been detected, then >>>>>>>>>>>>>> possibilities >>>>>>>>>>>>>> are: >>>>>>>>>>>>>> 1) A Conexant modem chip is present on 8086:284b, as Conexant >>>>>>>>>>>>>> chips >>>>>>>>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>>>>>>>> >>>>>>>>>>>>>> so try >>>>>>>>>>>>>> >>>>>>>>>>>>>> From >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>>>>>>>>> download >>>>>>>>>>>>>> hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip >>>>>>>>>>>>>> Under Linux unpack with: >>>>>>>>>>>>>> $ unzip hsfmodem*.zip >>>>>>>>>>>>>> Then install with: >>>>>>>>>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>>>>>>>>> Subsequently, the modem should be found with >>>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>> Edit in your personal information with: >>>>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>>>>>>> and try dialing out with: >>>>>>>>>>>>>> $ sudo wvdial. >>>>>>>>>>>>>> See DOCs/Testing.txt for details. >>>>>>>>>>>>>> Read DOCs/Conexant.txt >>>>>>>>>>>>>> >>>>>>>>>>>>>> Please report back after thus testing, >>>>>>>>>>>>>> >>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Jul 10, 2008 at 7:16 AM, roan <roan@xxxxxxxx> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Only plain text email is forwarded by the >>>>>>>>>>>>>>> Discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>>> List >>>>>>>>>>>>>>> Server, >>>>>>>>>>>>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>>>>>>>>>>>> YourName, YourCountry kernel 2.6.24-18-generic >>>>>>>>>>>>>>> With this Subject Line cogent experts will be alerted, and >>>>>>>>>>>>>>> useful >>>>>>>>>>>>>>> case >>>>>>>>>>>>>>> names left in the Archive. >>>>>>>>>>>>>>> YourCountry will enable Country specific guidance. Linux >>>>>>>>>>>>>>> experts >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> YourCountry >>>>>>>>>>>>>>> can be found through: >>>>>>>>>>>>>>> http://www.linux.org/groups/index.html. >>>>>>>>>>>>>>> They will know your Country's modem code, which may be >>>>>>>>>>>>>>> essential >>>>>>>>>>>>>>> for >>>>>>>>>>>>>>> dialup >>>>>>>>>>>>>>> service. >>>>>>>>>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by >>>>>>>>>>>>>>> an >>>>>>>>>>>>>>> Internet >>>>>>>>>>>>>>> Provider mail filters. >>>>>>>>>>>>>>> So in a day, also check the Archived responses at >>>>>>>>>>>>>>> http://www.linmodems.org >>>>>>>>>>>>>>> -------------------------- System information >>>>>>>>>>>>>>> ---------------------------- >>>>>>>>>>>>>>> CPU=i686, >>>>>>>>>>>>>>> Linux version 2.6.24-18-generic (buildd@terranova) (gcc >>>>>>>>>>>>>>> version >>>>>>>>>>>>>>> 4.2.3 >>>>>>>>>>>>>>> (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 >>>>>>>>>>>>>>> scanModem update of: 2008_06_28 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> There are no blacklisted modem drivers in /etc/modprobe* >>>>>>>>>>>>>>> files >>>>>>>>>>>>>>> Attached USB devices are: >>>>>>>>>>>>>>> ID 09da:000a A4 Tech Co., Ltd >>>>>>>>>>>>>>> ID 0c45:62c0 Microdia >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> USB modems not recognized >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> For candidate card in slot 00:1b.0, firmware information and >>>>>>>>>>>>>>> bootup >>>>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>>>>>>>>>> ---------- --------- --------- -------------- >>>>>>>>>>>>>>> 00:1b.0 8086:284b 1462:3fe9 Audio device: >>>>>>>>>>>>>>> Intel >>>>>>>>>>>>>>> Corporation 82801H >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Modem interrupt assignment and sharing: >>>>>>>>>>>>>>> 21: 407 392 IO-APIC-fasteoi uhci_hcd:usb4, >>>>>>>>>>>>>>> HDA >>>>>>>>>>>>>>> Intel >>>>>>>>>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>>>>>>>>>>> [ 34.842294] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 >>>>>>>>>>>>>>> (level, >>>>>>>>>>>>>>> low) >>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>> IRQ 21 >>>>>>>>>>>>>>> [ 34.842316] PCI: Setting latency timer of device >>>>>>>>>>>>>>> 0000:00:1b.0 >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> 64 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics >>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>> The ALSA packages provide audio support and also drivers for >>>>>>>>>>>>>>> some >>>>>>>>>>>>>>> modems. >>>>>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ >>>>>>>>>>>>>>> folders. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> PCI slot 00:1b.0 has a High Definition Audio Card >>>>>>>>>>>>>>> The drivers are in the kernel modules tree at: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /lib/modules/2.6.24-18-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The ALSA verion is 1.0.15 >>>>>>>>>>>>>>> The modem cards detected by "aplay -l" are: None >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>>>>> ----------------------- >>>>>>>>>>>>>>> 00-02: ALC883 Analog : ALC883 Analog : capture 1 >>>>>>>>>>>>>>> 00-01: ALC883 Digital : ALC883 Digital : playback 1 >>>>>>>>>>>>>>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>>>>> ------------------------ >>>>>>>>>>>>>>> 0 [Intel ]: HDA-Intel - HDA Intel >>>>>>>>>>>>>>> HDA Intel at 0xf9ff8000 irq 21 >>>>>>>>>>>>>>> === Finished firmware and bootup diagnostics, next deducing >>>>>>>>>>>>>>> cogent >>>>>>>>>>>>>>> software. >>>>>>>>>>>>>>> === >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> A candidate modem is not evident among the PCI devices: >>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) >>>>>>>>>>>>>>> HD >>>>>>>>>>>>>>> Audio >>>>>>>>>>>>>>> Controller (rev 03) >>>>>>>>>>>>>>> 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM >>>>>>>>>>>>>>> (ICH8M/ICH8M-E) >>>>>>>>>>>>>>> SATA >>>>>>>>>>>>>>> IDE Controller (rev 03) >>>>>>>>>>>>>>> 01:00.0 VGA compatible controller: nVidia Corporation GeForce >>>>>>>>>>>>>>> 8400M >>>>>>>>>>>>>>> G >>>>>>>>>>>>>>> (rev >>>>>>>>>>>>>>> a1) >>>>>>>>>>>>>>> 03:00.0 Network controller: Intel Corporation PRO/Wireless >>>>>>>>>>>>>>> 3945ABG >>>>>>>>>>>>>>> Network >>>>>>>>>>>>>>> Connection (rev 02) >>>>>>>>>>>>>>> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >>>>>>>>>>>>>>> RTL8111/8168B >>>>>>>>>>>>>>> PCI Express Gigabit Ethernet controller (rev 01) >>>>>>>>>>>>>>> 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD >>>>>>>>>>>>>>> Controller >>>>>>>>>>>>>>> (rev >>>>>>>>>>>>>>> 02) >>>>>>>>>>>>>>> 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated >>>>>>>>>>>>>>> MS/xD >>>>>>>>>>>>>>> Controller >>>>>>>>>>>>>>> (rev 01) >>>>>>>>>>>>>>> 05:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE >>>>>>>>>>>>>>> 1394) >>>>>>>>>>>>>>> (rev >>>>>>>>>>>>>>> 02) >>>>>>>>>>>>>>> ------------------------------------------------ >>>>>>>>>>>>>>> with USB and bridge devices not displayed. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If your modem is connected by an external serial cable, >>>>>>>>>>>>>>> or mounted internally on an ISA card, scanModem would not >>>>>>>>>>>>>>> access >>>>>>>>>>>>>>> it. >>>>>>>>>>>>>>> Try with Root permission >>>>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>>> to detect these modem types and some USB modems. >>>>>>>>>>>>>>> If the detection is successful, read the DOCs/wvdial.txt . >>>>>>>>>>>>>>> Edit the /etc/wvdial.conf with Root permission: >>>>>>>>>>>>>>> sudo gedit /etc/wvdial.conf >>>>>>>>>>>>>>> will be able to dial out with Root permission: >>>>>>>>>>>>>>> sudo wvdial >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Many modems for which scanModem fails have Conexant chips. >>>>>>>>>>>>>>> From http://www.linuxant.com/drivers/modemident.php >>>>>>>>>>>>>>> get the ListModem tool, which will report on Conexant >>>>>>>>>>>>>>> chipset >>>>>>>>>>>>>>> modems >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If the above tests fail, please provide any independent >>>>>>>>>>>>>>> information >>>>>>>>>>>>>>> available on your modem. >>>>>>>>>>>>>>> If an alternative boot into Microsoft windows can be done, >>>>>>>>>>>>>>> do >>>>>>>>>>>>>>> mouse >>>>>>>>>>>>>>> clicks on: >>>>>>>>>>>>>>> Start > Settings > Control Panel > Classical View (for >>>>>>>>>>>>>>> Window >>>>>>>>>>>>>>> XP) >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> System >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hardware > Device Manager > Modems > Click on the + > Modem. >>>>>>>>>>>>>>>> Double >>>>>>>>>>>>>>>> click >>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> expand the graphic. Manufacturer information may be >>>>>>>>>>>>>>> displayed. >>>>>>>>>>>>>>> For >>>>>>>>>>>>>>> example, >>>>>>>>>>>>>>> CXT >>>>>>>>>>>>>>> stands for Conexant. Click the Diagnostics Tab. Record any >>>>>>>>>>>>>>> hardware >>>>>>>>>>>>>>> ID >>>>>>>>>>>>>>> or >>>>>>>>>>>>>>> vendor >>>>>>>>>>>>>>> and device information. From the Driver Details TAB, copy out >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> VENdor >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> DEVice information. >>>>>>>>>>>>>>> Next do the Query Modem and record the ATI specifications >>>>>>>>>>>>>>> displayed >>>>>>>>>>>>>>> such >>>>>>>>>>>>>>> as: >>>>>>>>>>>>>>> ATI3 - Agere SoftModem Version 2.1.22 >>>>>>>>>>>>>>> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >>>>>>>>>>>>>>> Try to identify the modem setup file, with name perhaps >>>>>>>>>>>>>>> MODEM.INF. >>>>>>>>>>>>>>> If may contain chipset Vendor informaton. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The /proc/asound/ audio+modem diagostics are being copied. >>>>>>>>>>>>>>> Finished copy to Modem/ALSAroot.tgz >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Predictive diagnostics for card in bus 00:1b.0: >>>>>>>>>>>>>>> Modem chipset not detected on >>>>>>>>>>>>>>> NAME="Audio device: Intel Corporation 82801H " >>>>>>>>>>>>>>> CLASS=0403 >>>>>>>>>>>>>>> PCIDEV=8086:284b >>>>>>>>>>>>>>> SUBSYS=1462:3fe9 >>>>>>>>>>>>>>> IRQ=21 >>>>>>>>>>>>>>> HDA=8086:284b >>>>>>>>>>>>>>> SOFT=8086:284b.HDA >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> High Definition Audio (HDA) cards MAY host a modem chip in >>>>>>>>>>>>>>> their >>>>>>>>>>>>>>> Subsystem, >>>>>>>>>>>>>>> and many are supported by the ALSA audio+modem driver >>>>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>>>> A modem was not detected on HDA card 8086:284b. >>>>>>>>>>>>>>> If another modem card is present, then most likely 8086:284b >>>>>>>>>>>>>>> does >>>>>>>>>>>>>>> not >>>>>>>>>>>>>>> host >>>>>>>>>>>>>>> a modem. >>>>>>>>>>>>>>> If another modem card has not been detected, then >>>>>>>>>>>>>>> possibilities >>>>>>>>>>>>>>> are: >>>>>>>>>>>>>>> 1) A Conexant modem chip is present on 8086:284b, as >>>>>>>>>>>>>>> Conexant >>>>>>>>>>>>>>> chips >>>>>>>>>>>>>>> are frequently not detectable by ALSA diagnostics >>>>>>>>>>>>>>> 2) The modem may be of the older non-PCI Controller Chipset >>>>>>>>>>>>>>> (hardware) type. >>>>>>>>>>>>>>> Try detection with Root permission: >>>>>>>>>>>>>>> sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> For candidate modem in: 00:1b.0 >>>>>>>>>>>>>>> 0403 Audio device: Intel Corporation 82801H >>>>>>>>>>>>>>> Primary device ID: 8086:284b >>>>>>>>>>>>>>> Subsystem PCI_id 1462:3fe9 >>>>>>>>>>>>>>> Softmodem codec or chipset from diagnostics: >>>>>>>>>>>>>>> from Archives: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Support type needed or chipset: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Support can likely be achieved through two mutually exclusive >>>>>>>>>>>>>>> alternatives: >>>>>>>>>>>>>>> 1) The hsfmodem software for Conexant chipset modems: Read >>>>>>>>>>>>>>> DOCs/Conexant.txt >>>>>>>>>>>>>>> The following ALSA alternative CANNOT work with Conexant >>>>>>>>>>>>>>> modems. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2) An ALSA modem driver plus slmodemd. Read >>>>>>>>>>>>>>> DOCs/Smartlink.txt >>>>>>>>>>>>>>> for >>>>>>>>>>>>>>> details, >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> to test get the package SLMODEMD.gcc4.2.tar.gz from: >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/smartlink/ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ----------------end Softmodem section -------------- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Writing DOCs/Intel.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver >>>>>>>>>>>>>>> source >>>>>>>>>>>>>>> package >>>>>>>>>>>>>>> with full speed enabled is available, but requires driver >>>>>>>>>>>>>>> compiling. >>>>>>>>>>>>>>> Read >>>>>>>>>>>>>>> DOCs/Conexant.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> From >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>>>>>>>>>> download >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip >>>>>>>>>>>>>>> Under Linux unpack with: >>>>>>>>>>>>>>> $ unzip hsfmodem*.zip >>>>>>>>>>>>>>> Then install with: >>>>>>>>>>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>>>>>>>>>> Subsequently, the modem should be found with >>>>>>>>>>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>>>>>>>>>> Edit in your personal information with: >>>>>>>>>>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>>>>>>>>>> and try dialing out with: >>>>>>>>>>>>>>> $ sudo wvdial. >>>>>>>>>>>>>>> See DOCs/Testing.txt for details. >>>>>>>>>>>>>>> Read DOCs/Conexant.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Writing DOCs/Conexant.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Writing DOCs/Smartlink.txt >>>>>>>>>>>>>>> ============ end Smartlink section ===================== >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The base of the UDEV device file system is: /dev/.udev >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Versions adequately match for the compiler installed: 4.2.3 >>>>>>>>>>>>>>> and the compiler used in kernel assembly: 4.2.3 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Minimal compiling resources appear complete: >>>>>>>>>>>>>>> make utility - /usr/bin/make >>>>>>>>>>>>>>> Compiler version 4.2 >>>>>>>>>>>>>>> linuc_headers base folder >>>>>>>>>>>>>>> /lib/modules/2.6.24-18-generic/build >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> However some compilations and executable functions may need >>>>>>>>>>>>>>> additional >>>>>>>>>>>>>>> files, >>>>>>>>>>>>>>> in the FileNames.h (so called kernel "h"eaders) collection >>>>>>>>>>>>>>> installed >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> /usr/include/ . >>>>>>>>>>>>>>> For martian_modem, additional required packages are >>>>>>>>>>>>>>> libc6-dev >>>>>>>>>>>>>>> (and >>>>>>>>>>>>>>> for >>>>>>>>>>>>>>> Debian/Ubuntu, >>>>>>>>>>>>>>> linux-libc-dev). The also required headers of package libc6 >>>>>>>>>>>>>>> are >>>>>>>>>>>>>>> commonly >>>>>>>>>>>>>>> installed by default. >>>>>>>>>>>>>>> Compiling hsfmodem drivers does require linux-libc-dev and >>>>>>>>>>>>>>> libc6-dev >>>>>>>>>>>>>>> packages, for kernels 2.6.24 and later versions. >>>>>>>>>>>>>>> In not included on your install CD, search for them at >>>>>>>>>>>>>>> http://packages.ubuntu.com >>>>>>>>>>>>>>> or comparable Repository for other Linux distros. >>>>>>>>>>>>>>> When compiling ALSA drivers, the utility "patch" will also >>>>>>>>>>>>>>> be >>>>>>>>>>>>>>> needed. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If a driver compilation fails, with message including some >>>>>>>>>>>>>>> lack >>>>>>>>>>>>>>> of >>>>>>>>>>>>>>> some >>>>>>>>>>>>>>> FileName.h (stdio.h for example), then >>>>>>>>>>>>>>> Some additional kernel-header files need installation to >>>>>>>>>>>>>>> /usr/include. >>>>>>>>>>>>>>> The >>>>>>>>>>>>>>> minimal additional packages are libc6-dev >>>>>>>>>>>>>>> and any of its dependents, under Ubuntu linux-libc-dev >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If an alternate ethernet connection is available, >>>>>>>>>>>>>>> $ apt-get update >>>>>>>>>>>>>>> $ apt-get -s install linux-kernel-devel >>>>>>>>>>>>>>> will install needed packages. >>>>>>>>>>>>>>> For Debian/Ubuntu related distributions, run the following >>>>>>>>>>>>>>> command >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> display the needed package list: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Otherwise packages have to be found through >>>>>>>>>>>>>>> http://packages.ubuntu.com >>>>>>>>>>>>>>> Once downloaded and transferred into a Linux partition, >>>>>>>>>>>>>>> they can be installed alltogether with: >>>>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Checking pppd properties: >>>>>>>>>>>>>>> -rwsr-xr-- 1 root dip 269256 2007-10-04 22:57 /usr/sbin/pppd >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> In case of an "error 17" "serial loopback" problem, see: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> To enable dialout without Root permission do: >>>>>>>>>>>>>>> $ su - root (not for Ubuntu) >>>>>>>>>>>>>>> sudo chmod a+x /usr/sbin/pppd >>>>>>>>>>>>>>> or under Ubuntu related Linuxes >>>>>>>>>>>>>>> sudo chmod a+x /usr/sbin/pppd >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Checking settings of: /etc/ppp/options >>>>>>>>>>>>>>> asyncmap 0 >>>>>>>>>>>>>>> noauth >>>>>>>>>>>>>>> crtscts >>>>>>>>>>>>>>> lock >>>>>>>>>>>>>>> hide-password >>>>>>>>>>>>>>> modem >>>>>>>>>>>>>>> proxyarp >>>>>>>>>>>>>>> lcp-echo-interval 30 >>>>>>>>>>>>>>> lcp-echo-failure 4 >>>>>>>>>>>>>>> noipx >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> In case of a message like: >>>>>>>>>>>>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission >>>>>>>>>>>>>>> denied >>>>>>>>>>>>>>> see >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM >>>>>>>>>>>>>>> channels: >>>>>>>>>>>>>>> eth0 >>>>>>>>>>>>>>> Which can interfere with Browser naviagation. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Don't worry about the following, it is for experts should >>>>>>>>>>>>>>> trouble >>>>>>>>>>>>>>> shooting >>>>>>>>>>>>>>> be necessary. >>>>>>>>>>>>>>> ========================================================== >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Checking for modem support lines: >>>>>>>>>>>>>>> -------------------------------------- >>>>>>>>>>>>>>> /device/modem symbolic link: >>>>>>>>>>>>>>> slmodemd created symbolic link /dev/ttySL0: >>>>>>>>>>>>>>> Within /etc/udev/ files: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Within /etc/modprobe.conf files: >>>>>>>>>>>>>>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >>>>>>>>>>>>>>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in >>>>>>>>>>>>>>> order >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> blacklist unwanted modem drivers >>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >>>>>>>>>>>>>>> Within any ancient /etc/devfs files: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> --------- end modem support lines -------- >>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> --- >>>>>>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> --- >>>>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>>>> >>>>>>>>> >>>>>>>>> --- >>>>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>>>> >>>>>>> >>>>>>> --- >>>>>>> Professional hosting for everyone - http://www.host.ru >>>>>>> >>>>> >>>>> --- >>>>> Professional hosting for everyone - http://www.host.ru >>>>> >>> >>> --- >>> Professional hosting for everyone - http://www.host.ru >>> > > --- > Professional hosting for everyone - http://www.host.ru >
