Re: @Marv & José R - Tracking down the 11c11040 problem on 2.6.25.5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



UPDATE:
Success on openSuSE 10.3, the modem works correctly, just building the source with NO patches applied. (kernel 2.6.22.5-31) and alsa version 1.0.14. (the /usr/src/linux/sound dir was used as alsa source, modified to export the correct symbols, and then the modules were built.)

The snd_cards symbol issue below is resolved- agrmodem expectes the version shipped by the distro... not the version I built myself from 1.0.17RC2 source. However, there are still segfaults and kerenl OOPses trying to work with the modem in SuSE 11, kernel 2.6.25.5
Bjorn.




Bjorn Wielens wrote:
Hello all,
I've been working on the 11c11040 driver on 2.6.25 again.
Some further proceedings: The no_stream error is likely caused by the fact that it is given the result of the snd_cards call. This snd_cards call does not match the version the module wants, which is probably the failure reason.

I've found the following:
agrmodem.ko needs snd_cards version 0xd4227f9c
whereas alsa 1.0.17-rc2 provides version 0xeaa3f440.

Anyone know which version of ALSA provides the needed snd_cards symbol?
Thanks!
Bjorn.


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux