\begin{wvdial.conf}
So then I tried this:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 460800
Modem = /dev/ttySL0
ISDN = 0
Phone = 7054579564
Password = XXXXXXXX
Username = XXXXXXXX@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx #this
information I obtained by logging into irc and evaluating my personal
information. Thought I would give it a try.
Carrier Check = no
\end{wvdial.conf}
Modify the following line
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
change it to
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
or
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
and hope that does it. Otherwise please report back to the list.
Regards,
Antonio
On 3/7/08, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> Thank you for the suggestion, Marvin.
>
> I tried this:
> [Dialer Defaults]
> Init1 = ATZ
> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> Modem Type = Analog Modem
> Baud = 460800
> Modem = /dev/ttySL0
> ISDN = 0
> Phone = 7054579564
> Password = XXXXXXXX #protected for the purpose of the email
> Username = XXXXXXXX #protected for the purpose of the email
> Carrier Check = no
>
> And got this:
> anita@anitas-computer:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.56
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT7054579564
> --> Waiting for carrier.
> ATDT7054579564
> NO CARRIER
> ERROR
>
> So then I tried this:
> [Dialer Defaults]
> Init1 = ATZ
> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> Modem Type = Analog Modem
> Baud = 460800
> Modem = /dev/ttySL0
> ISDN = 0
> Phone = 7054579564
> Password = XXXXXXXX
> Username = XXXXXXXX@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx #this
> information I obtained by logging into irc and evaluating my personal
> information. Thought I would give it a try.
> Carrier Check = no
>
> And I got this:
> anita@anitas-computer:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.56
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT7054579564
> --> Waiting for carrier.
> ATDT7054579564
> NO CARRIER
> ERROR
>
> What should I try next?
>
> Thank you,
> Anita.
>
>
>
> Marvin Stodolsky wrote:
> > Anita,
> > Add a line to /etc/wvdial.conf
> > Carrier Check = no
> > and then retest as before. This line is necessary, because /dev/pts/N
> > ports do not yet have "sound hearing" capability and hence cannot hear
> > the Carrier signal.
> >
> > MarvS
> >
> > On Thu, Mar 6, 2008 at 4:33 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >
> >> Thank you, Jacques, I did figure out that my problem from my last post
> >> was that I had not configured the file by calling wvdialconf. Thank you
> >> for your clarity.
> >>
> >> So after running wvdialconf, I configured the file as follows:
> >>
> >> [Dialer Defaults]
> >> Init1 = ATZ
> >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >> Modem Type = Analog Modem
> >> Baud = 460800
> >>
> >> Modem = /dev/ttySL0
> >> ISDN = 0
> >> Phone = 7054579564
> >> Password = XXXXXXXX #hidden for the purpose of this email
> >> Username = XXXXXXXX #hidden for the purpose of this email
> >>
> >> And ran sudo wvdial:
> >> $ sudo wvdial
> >>
> >> --> WvDial: Internet dialer version 1.56
> >> --> Cannot get information for serial port.
> >> --> Initializing modem.
> >> --> Sending: ATZ
> >> ATZ
> >> OK
> >> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >>
> >> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >> OK
> >> --> Modem initialized.
> >> --> Sending: ATDT7054579564
> >> --> Waiting for carrier.
> >> ATDT7054579564
> >> NO CARRIER
> >> ERROR
> >> --> No Carrier! Trying again.
> >> --> Sending: ATDT7054579564
> >> --> Waiting for carrier.
> >> ATDT7054579564
> >> NO CARRIER
> >>
> >> So, NO CARRIER. What is it looking for and how do I give it what it
> wants?
> >>
> >>
> >> Thanks,
> >> Anita.
> >>
> >>
> >> Jacques Goldberg wrote:
> >> > Again
> >> >
> >> > 1-In one window, sudo slmodemd etc...
> >> > 2-In an other window, sudo wvdialconf /etc/wvdial.conf
> >> > Instead, you did sudo wvdial /etc/wvdial.conf
> >> > but wvdialconf and wvdial are NOT the same thing. These are two
> >> > DIFFERENT commands. One configures the modem once for all, the other,
> >> > wvdial , makes the connection
> >> >
> >> > You must run wvdialconf as shown, at least ONCE, while slmodemd IS
> >> > running
> >> > wvdialconf will find your modem
> >> > Edit the file /etc/wvdial.conf (username, password, phone . Remove
> >> > leading ; and < > containers and replace parameter in container by
> >> > value given to you by your ISP )
> >> >
> >> > Only NOW can you try, as many times as you like sudo wvdial
> >> > and note, NOT sudo wvdial /etc/wvdial.conf , just sudo wvdial
> >> > wvdial knows that it has to use /etc/wvdial.conf
> >> >
> >> > And just to make sure: slmodemd MUST also be running while you try
> >> > wvdial
> >>
> >>
> >>
> >> > Jacques
> >> >
> >> > Anita Kuno wrote:
> >> >> Thank you, Jacques, you are entirely correct. I do not understand
> >> >> the procedure.
> >> >>
> >> >> However, when I sent
> >> >> Results from second terminal with first terminal running slmodemd:
> >> >> that was my way of saying that I had done the first step as you
> >> >> outlined:
> >> >> 1-In one window, you start slmodemd and DO NOT STOP IT
> >> >>
> >> >> And when I also submitted:
> >> >> anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
> >> >> Password:
> >> >> --> WvDial: Internet dialer version 1.56
> >> >> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
> >> >> wvdial.conf.
> >> >> --> Cannot open /dev/modem: No such file or directory
> >> >> --> Cannot open /dev/modem: No such file or directory
> >> >> --> Cannot open /dev/modem: No such file or directory
> >> >>
> >> >> That was my way of demonstrating that I had:
> >> >> 2-In an other window you start
> >> >> sudo wvdialconf /etc/wvdial./.conf
> >> >>
> >> >> And I was hoping for:
> >> >> which should find your modem
> >> >>
> >> >> And perhaps I mis-interpreted the result, but when I read:
> >> >> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
> >> >> wvdial.conf.
> >> >> --> Cannot open /dev/modem: No such file or directory
> >> >> --> Cannot open /dev/modem: No such file or directory
> >> >> --> Cannot open /dev/modem: No such file or directory
> >> >> I took that to mean that it couldn't find the modem.
> >> >>
> >> >> So I am wondering how to find the modem.
> >> >>
> >> >> Thanks,
> >> >> Anita.
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> Jacques Goldberg wrote:
> >> >>> I believe that you do not understand the procedure
> >> >>>
> >> >>> 1-In one window, you start slmodemd and DO NOT STOP IT
> >> >>> 2-In an other window you start
> >> >>> sudo wvdialconf /etc/wvdial./.conf
> >> >>> which should find your modem
> >> >>> When wvdialconf exits and has found a modem, you EDIT
> >> >>> the file /etc/wvdial.conf to set username, password, phone
> >> >>> as in
> >> >>> username = tartempion
> >> >>> phone = 0123456788
> >> >>> password = sunday_times
> >> >>> After editing, you start wvdial as
> >> >>> sudo wvdial
> >> >>> and you do NOT stop wvdial until you want to close the phone call.
> >> >>> You cannot use these two windows for anything else until you have
> >> >>> ended wvdial and slmodemd
> >> >>>
> >> >>> Jacques
> >> >>>
> >> >>> Anita Kuno wrote:
> >> >>>> Thank you Marvin and Antonio,
> >> >>>>
> >> >>>> Results from second terminal with first terminal running slmodemd:
> >> >>>>
> >> >>>> anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
> >> >>>> Password:
> >> >>>> --> WvDial: Internet dialer version 1.56
> >> >>>> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
> >> >>>> wvdial.conf.
> >> >>>> --> Cannot open /dev/modem: No such file or directory
> >> >>>> --> Cannot open /dev/modem: No such file or directory
> >> >>>> --> Cannot open /dev/modem: No such file or directory
> >> >>>> anita@anitas-computer:~$
> >> >>>>
> >> >>>>
> >> >>>> Marvin Stodolsky wrote:
> >> >>>>> Anita,
> >> >>>>>
> >> >>>>> Just to clarify on Antonio's terse comment.
> >> >>>>> After the successful:
> >> >>>>> $ sudo slmodemd -c CANADA --alsa hw:0,6
> >> >>>>> leave slmodemd running.
> >> >>>>> Open a 2nd console or new TAB on the same one and run the
> >> >>>>> $ sudo wvdialconf /etc/wvdial.conf
> >> >>>>> If this step succeeds:
> >> >>>>> $ sudo gedit /etc/wvdial.conf
> >> >>>>> and edit to a format like that below.
> >> >>>>>
> >> >>>>> Afterward with slmodemd still running, try a dialout with:
> >> >>>>> $ sudo wvdial
> >> >>>>>
> >> >>>>> Please report back to the List, not to me directly:
> >> >>>>>
> >> >>>>> MarvS
> >> >>>>> -----------------
> >> >>>>> [Dialer Defaults]
> >> >>>>> Init1 = ATZ
> >> >>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >> >>>>> Modem Type = Analog Modem
> >> >>>>> Baud = 460800
> >> >>>>> New PPPD = yes
> >> >>>>> Modem = /dev/ttySL0
> >> >>>>> ISDN = 0
> >> >>>>> Password = YourPassword
> >> >>>>> Username = LoginName@xxxxxxxxxxxxxxxx
> >> >>>>> Phone = 3015560020
> >> >>>>> # needed for usage with /dev/pts/N ports:
> >> >>>>> Carrier Check = no
> >> >>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>> On Wed, Mar 5, 2008 at 7:38 PM, Antonio Olivares
> >> >>>>> <olivares14031@xxxxxxxxx> wrote:
> >> >>>>>
> >> >>>>>> When you did this
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> $ sudo slmodemd -c CANADA --alsa hw:0,6
> >> >>>>>> => SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
> >> >>>>>> => symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
> >> >>>>>> => modem `hw:0,6' created. TTY is `/dev/pts/1'
> >> >>>>>> =>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
> >> >>>>>>
> >> >>>>>> Did you CTRL+C to do sudo wvdialconf /etc/wvdial.conf ?
> >> >>>>>>
> >> >>>>>> open up another terminal or session and then type
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> $ sudo wvdialconf /etc/wvdial.conf
> >> >>>>>>
> >> >>>>>> That should find your modem, and get you setup. Please report
> >> >>>>>> back if
> >> >>>>>> you have trouble/questions.
> >> >>>>>>
> >> >>>>>> Regards,
> >> >>>>>>
> >> >>>>>> Antonio
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> On 3/5/08, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >> >>>>>> > I have unpacked SLMODEMD:
> >> >>>>>> > $ tar -zxvf ./SLMODEMD.gcc4.1.tar.gz
> >> >>>>>> >
> >> >>>>>> > And I believe this makes SLMODEMD an executable file:
> >> >>>>>> > $ chmod +x slmodemd
> >> >>>>>> > $ sudo cp slmodemd /usr/sbin
> >> >>>>>> >
> >> >>>>>> > And I think this verifies the location:
> >> >>>>>> > $ find /usr -name slmodemd
> >> >>>>>> > => /usr/sbin/slmodemd
> >> >>>>>> >
> >> >>>>>> > So then I installed SLMODEMD:
> >> >>>>>> > $ sudo slmodemd -c CANADA --alsa hw:0,6
> >> >>>>>> > => SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
> >> >>>>>> > => symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
> >> >>>>>> > => modem `hw:0,6' created. TTY is `/dev/pts/1'
> >> >>>>>> > =>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
> >> >>>>>> >
> >> >>>>>> > So then I worked on wvdial.
> >> >>>>>> > $ which wvdial
> >> >>>>>> > => /usr/bin/wvdial
> >> >>>>>> > $ sudo wvdialconf /etc/wvdial.conf
> >> >>>>>> > =>Editing `/etc/wvdial.conf'.
> >> >>>>>> > => Scanning your serial ports for a modem.
> >> >>>>>> > => Modem Port Scan<*1>: S0 S1 S2 S3
> >> >>>>>> > => Sorry, no modem was detected! Is it in use by another
> >> >>>>>> program?
> >> >>>>>> > => Did you configure it properly with setserial?
> >> >>>>>> > => Please read the FAQ at http://open.nit.ca/wiki/?WvDial
> >> >>>>>> > => If you still have problems, send mail to
> >> >>>>>> <wvdial-list@xxxxxxxxxxxx>.
> >> >>>>>> >
> >> >>>>>> > I have tried the url to find the FAQ, can't find it.
> >> >>>>>> > And I have emailed them to ask for the FAQ url, no response.
> >> >>>>>> >
> >> >>>>>> > So I have evaluated the sound card:
> >> >>>>>> > $ cat /proc/asound/cards
> >> >>>>>> > => 0 [Intel ]: HDA-Intel - HDA Intel
> >> >>>>>> > => HDA Intel at 0xd8240000 irq 21
> >> >>>>>> >
> >> >>>>>> > And run uname:
> >> >>>>>> > $ uname -a
> >> >>>>>> > Linux anitas-computer 2.6.20-15-generic #2 SMP Sun Apr 15
> >> >>>>>> 07:36:31 UTC
> >> >>>>>> > 2007 i686 GNU/Linux
> >> >>>>>> >
> >> >>>>>> > And confirmed module-init-tools:
> >> >>>>>> > $ dpkg -s module-init-tools
> >> >>>>>> > => Package: module-init-tools
> >> >>>>>> > => Status: install ok installed
> >> >>>>>> >
> >> >>>>>> > What is my next step?
> >> >>>>>> >
> >> >>>>>> > Thank you,
> >> >>>>>> > Anita.
> >> >>>>>> >
> >> >>>>>> >
> >> >>>>>> >
> >> >>>>>> >
> >> >>>>>> >
> >> >>>>>>
> >> >>>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>
> >> >>>
> >> >>
> >> >
> >>
> >>
> >>
> >
> >
>
>
