Thank you, Jacques, you are entirely correct. I do not understand the
procedure.
However, when I sent
Results from second terminal with first terminal running slmodemd:
that was my way of saying that I had done the first step as you outlined:
1-In one window, you start slmodemd and DO NOT STOP IT
And when I also submitted:
anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
Password:
--> WvDial: Internet dialer version 1.56
--> Warning: section [Dialer /etc/wvdial.conf] does not exist in
wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
That was my way of demonstrating that I had:
2-In an other window you start
sudo wvdialconf /etc/wvdial./.conf
And I was hoping for:
which should find your modem
And perhaps I mis-interpreted the result, but when I read:
--> Warning: section [Dialer /etc/wvdial.conf] does not exist in
wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
I took that to mean that it couldn't find the modem.
So I am wondering how to find the modem.
Thanks,
Anita.
Jacques Goldberg wrote:
I believe that you do not understand the procedure
1-In one window, you start slmodemd and DO NOT STOP IT
2-In an other window you start
sudo wvdialconf /etc/wvdial./.conf
which should find your modem
When wvdialconf exits and has found a modem, you EDIT
the file /etc/wvdial.conf to set username, password, phone
as in
username = tartempion
phone = 0123456788
password = sunday_times
After editing, you start wvdial as
sudo wvdial
and you do NOT stop wvdial until you want to close the phone call.
You cannot use these two windows for anything else until you have
ended wvdial and slmodemd
Jacques
Anita Kuno wrote:
Thank you Marvin and Antonio,
Results from second terminal with first terminal running slmodemd:
anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
Password:
--> WvDial: Internet dialer version 1.56
--> Warning: section [Dialer /etc/wvdial.conf] does not exist in
wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
anita@anitas-computer:~$
Marvin Stodolsky wrote:
Anita,
Just to clarify on Antonio's terse comment.
After the successful:
$ sudo slmodemd -c CANADA --alsa hw:0,6
leave slmodemd running.
Open a 2nd console or new TAB on the same one and run the
$ sudo wvdialconf /etc/wvdial.conf
If this step succeeds:
$ sudo gedit /etc/wvdial.conf
and edit to a format like that below.
Afterward with slmodemd still running, try a dialout with:
$ sudo wvdial
Please report back to the List, not to me directly:
MarvS
-----------------
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttySL0
ISDN = 0
Password = YourPassword
Username = LoginName@xxxxxxxxxxxxxxxx
Phone = 3015560020
# needed for usage with /dev/pts/N ports:
Carrier Check = no
On Wed, Mar 5, 2008 at 7:38 PM, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
When you did this
$ sudo slmodemd -c CANADA --alsa hw:0,6
=> SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
=> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
=> modem `hw:0,6' created. TTY is `/dev/pts/1'
=>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
Did you CTRL+C to do sudo wvdialconf /etc/wvdial.conf ?
open up another terminal or session and then type
$ sudo wvdialconf /etc/wvdial.conf
That should find your modem, and get you setup. Please report
back if
you have trouble/questions.
Regards,
Antonio
On 3/5/08, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> I have unpacked SLMODEMD:
> $ tar -zxvf ./SLMODEMD.gcc4.1.tar.gz
>
> And I believe this makes SLMODEMD an executable file:
> $ chmod +x slmodemd
> $ sudo cp slmodemd /usr/sbin
>
> And I think this verifies the location:
> $ find /usr -name slmodemd
> => /usr/sbin/slmodemd
>
> So then I installed SLMODEMD:
> $ sudo slmodemd -c CANADA --alsa hw:0,6
> => SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
> => symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
> => modem `hw:0,6' created. TTY is `/dev/pts/1'
> =>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>
> So then I worked on wvdial.
> $ which wvdial
> => /usr/bin/wvdial
> $ sudo wvdialconf /etc/wvdial.conf
> =>Editing `/etc/wvdial.conf'.
> => Scanning your serial ports for a modem.
> => Modem Port Scan<*1>: S0 S1 S2 S3
> => Sorry, no modem was detected! Is it in use by another program?
> => Did you configure it properly with setserial?
> => Please read the FAQ at http://open.nit.ca/wiki/?WvDial
> => If you still have problems, send mail to
<wvdial-list@xxxxxxxxxxxx>.
>
> I have tried the url to find the FAQ, can't find it.
> And I have emailed them to ask for the FAQ url, no response.
>
> So I have evaluated the sound card:
> $ cat /proc/asound/cards
> => 0 [Intel ]: HDA-Intel - HDA Intel
> => HDA Intel at 0xd8240000 irq 21
>
> And run uname:
> $ uname -a
> Linux anitas-computer 2.6.20-15-generic #2 SMP Sun Apr 15
07:36:31 UTC
> 2007 i686 GNU/Linux
>
> And confirmed module-init-tools:
> $ dpkg -s module-init-tools
> => Package: module-init-tools
> => Status: install ok installed
>
> What is my next step?
>
> Thank you,
> Anita.
>
>
>
>
>
