Thank you Marvin and Antonio,
Results from second terminal with first terminal running slmodemd:
anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
Password:
--> WvDial: Internet dialer version 1.56
--> Warning: section [Dialer /etc/wvdial.conf] does not exist in
wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
anita@anitas-computer:~$
Marvin Stodolsky wrote:
Anita,
Just to clarify on Antonio's terse comment.
After the successful:
$ sudo slmodemd -c CANADA --alsa hw:0,6
leave slmodemd running.
Open a 2nd console or new TAB on the same one and run the
$ sudo wvdialconf /etc/wvdial.conf
If this step succeeds:
$ sudo gedit /etc/wvdial.conf
and edit to a format like that below.
Afterward with slmodemd still running, try a dialout with:
$ sudo wvdial
Please report back to the List, not to me directly:
MarvS
-----------------
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttySL0
ISDN = 0
Password = YourPassword
Username = LoginName@xxxxxxxxxxxxxxxx
Phone = 3015560020
# needed for usage with /dev/pts/N ports:
Carrier Check = no
On Wed, Mar 5, 2008 at 7:38 PM, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
When you did this
$ sudo slmodemd -c CANADA --alsa hw:0,6
=> SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
=> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
=> modem `hw:0,6' created. TTY is `/dev/pts/1'
=>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
Did you CTRL+C to do sudo wvdialconf /etc/wvdial.conf ?
open up another terminal or session and then type
$ sudo wvdialconf /etc/wvdial.conf
That should find your modem, and get you setup. Please report back if
you have trouble/questions.
Regards,
Antonio
On 3/5/08, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> I have unpacked SLMODEMD:
> $ tar -zxvf ./SLMODEMD.gcc4.1.tar.gz
>
> And I believe this makes SLMODEMD an executable file:
> $ chmod +x slmodemd
> $ sudo cp slmodemd /usr/sbin
>
> And I think this verifies the location:
> $ find /usr -name slmodemd
> => /usr/sbin/slmodemd
>
> So then I installed SLMODEMD:
> $ sudo slmodemd -c CANADA --alsa hw:0,6
> => SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
> => symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
> => modem `hw:0,6' created. TTY is `/dev/pts/1'
> =>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>
> So then I worked on wvdial.
> $ which wvdial
> => /usr/bin/wvdial
> $ sudo wvdialconf /etc/wvdial.conf
> =>Editing `/etc/wvdial.conf'.
> => Scanning your serial ports for a modem.
> => Modem Port Scan<*1>: S0 S1 S2 S3
> => Sorry, no modem was detected! Is it in use by another program?
> => Did you configure it properly with setserial?
> => Please read the FAQ at http://open.nit.ca/wiki/?WvDial
> => If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.
>
> I have tried the url to find the FAQ, can't find it.
> And I have emailed them to ask for the FAQ url, no response.
>
> So I have evaluated the sound card:
> $ cat /proc/asound/cards
> => 0 [Intel ]: HDA-Intel - HDA Intel
> => HDA Intel at 0xd8240000 irq 21
>
> And run uname:
> $ uname -a
> Linux anitas-computer 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC
> 2007 i686 GNU/Linux
>
> And confirmed module-init-tools:
> $ dpkg -s module-init-tools
> => Package: module-init-tools
> => Status: install ok installed
>
> What is my next step?
>
> Thank you,
> Anita.
>
>
>
>
>
