Terry, There was no attachment. Also please send us the entire ModemData.txt output. The ltmodem/martian and SV92P code support entirely different modem chips. There are occassion mislabelings of modem packages. So we need the entire ModemData.txt MarvS scanModem maintainer On Thu, Feb 14, 2008 at 7:19 PM, tgillett@xxxxxxxxxxxxxx <tgillett@xxxxxxxxxxxxxx> wrote: > > Hello > > I have been trying to get a Dynalink PCI modem board with the Agere SV92P chipset > working, following the HowTo page at Ubuntu > (https://help.ubuntu.com/community/DialupModemHowto) which in turn took me to > linmodems and the scanModem pages. > > The modem is detected as the Agere SV2P as follows in ModemData.txt as shown below. > > I have installed the Lucent driver as per the instructions here: > https://help.ubuntu.com/community/DialupModemHowto/Lucent > > and the modem is happily detected by wvdialconf as /dev/ttyLTM0. > > However when I attempt to dial out, it can't get dial tone (see wvdial output below). > > I have seen a number of older references to the SV92P chipset not being supported > under Linux, however it seems that the SV2P driver is communicating with the modem. > > My question is: should the SV92P based board work with the SV2P driver? > Or am I wasting my time with it? > > Thanks in advance for any help on this. > > Terry >
