Roy, Remotely troubleshooting an irregular System is very difficult, but: ---------- Jan 29 18:58:26 Lindt2 syslogd 1.4.1#21ubuntu3: restart. Jan 29 19:10:03 Lindt2 kernel: [ 1599.712000] "martian_dev": martian_modem is detached ---------- If you have put martian_dev in the /etc/modules. This is likely a bad idea. Let the System stabilize before trying to use the modem. Also is $ sudo martian_modem -c us left running when in ANOTHER console, there is done: $ sudo wvdial More generally, when trouble shooting a problem, simplify the System as much as possible. Detach USB stuff and PCMCIA cards, etc. Once modem usage is reproducible, You can test the effects of adding back auxiliaries. MarvS On Jan 29, 2008 11:07 PM, Roy Taylor <crt@xxxxxxxxxx> wrote: > Marv -- > > Connected once, but can't now repeat it: > > crt@Lindt2:~$ sudo wvdial > WvDial<*1>: WvDial: Internet dialer version 1.56 > WvDial<Err>: Cannot open /dev/ttySM0: Input/output error > > Marvin Stodolsky wrote: > > I would advise doing trials directly with wvdial, and avoid > > other front ends which can just obscure diagnostic messages > > to /var/log/messages. > > What's going on here? I attach the full /var/log/messages but, for the > group, here are the lines from the last boot: > > Jan 29 22:24:10 Lindt2 syslogd 1.4.1#21ubuntu3: restart. > Jan 29 22:24:11 Lindt2 kernel: Inspecting /boot/System.map-2.6.22-14-generic > Jan 29 22:24:11 Lindt2 kernel: Loaded 25445 symbols from > /boot/System.map-2.6.22-14-generic. > Jan 29 22:24:11 Lindt2 kernel: Symbols match kernel version 2.6.22. > Jan 29 22:24:11 Lindt2 kernel: No module symbols loaded - kernel modules > not enabled. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Linux version > 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 > (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT > 2007 (Ubuntu 2.6.22-14.46-generic) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-provided physical RAM > map: > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: > 0000000000000000 - 000000000009fc00 (usable) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: > 000000000009fc00 - 00000000000a0000 (reserved) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: > 0000000000100000 - 0000000017fdb000 (usable) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: > 0000000017fdb000 - 0000000018000000 (reserved) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: > 00000000ffe00000 - 0000000100000000 (reserved) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] 0MB HIGHMEM available. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] 383MB LOWMEM available. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Zone PFN ranges: > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] DMA 0 -> > 4096 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Normal 4096 -> > 98267 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] HighMem 98267 -> > 98267 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] early_node_map[1] active > PFN ranges > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] 0: 0 -> 98267 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] DMI 2.3 present. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: RSDP signature @ > 0xC00F4C80 checksum 0 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: RSDP 000F4C80, 0014 > (r0 DELL ) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: RSDT 17FF0000, 0028 > (r1 DELL CPi R 27D20B07 ASL 61) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: FACP 17FF0400, 0074 > (r1 DELL CPi R 27D20B07 ASL 61) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: DSDT 17FF0800, 2ACA > (r1 INT430 SYSFexxx 1001 MSFT 100000E) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: FACS 17FFF800, 0040 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Allocating PCI resources > starting at 20000000 (gap: 18000000:e7e00000) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Built 1 zonelists. Total > pages: 97500 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Kernel command line: > root=UUID=8e2f89e5-dc8d-4824-a5a7-f86bc4b8776c ro quiet splash > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Local APIC disabled by > BIOS -- you can enable it with "lapic" > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Enabling fast FPU save and > restore... done. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Enabling unmasked SIMD FPU > exception support... done. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Initializing CPU#0 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] PID hash table entries: > 2048 (order: 11, 8192 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Detected 701.615 MHz > processor. > Jan 29 22:24:11 Lindt2 kernel: [ 555.134207] Console: colour VGA+ 80x25 > Jan 29 22:24:11 Lindt2 kernel: [ 555.135407] Dentry cache hash table > entries: 65536 (order: 6, 262144 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 555.136829] Inode-cache hash table > entries: 32768 (order: 5, 131072 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179617] Memory: 377868k/393068k > available (2015k kernel code, 14692k reserved, 916k data, 364k init, 0k > highmem) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179647] virtual kernel memory layout: > Jan 29 22:24:11 Lindt2 kernel: [ 555.179651] fixmap : 0xfff4d000 - > 0xfffff000 ( 712 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179655] pkmap : 0xff800000 - > 0xffc00000 (4096 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179660] vmalloc : 0xd8800000 - > 0xff7fe000 ( 623 MB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179664] lowmem : 0xc0000000 - > 0xd7fdb000 ( 383 MB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179668] .init : 0xc03e3000 - > 0xc043e000 ( 364 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179673] .data : 0xc02f7d26 - > 0xc03dce84 ( 916 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179677] .text : 0xc0100000 - > 0xc02f7d26 (2015 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179687] Checking if this processor > honours the WP bit even in supervisor mode... Ok. > Jan 29 22:24:11 Lindt2 kernel: [ 555.179787] SLUB: Genslabs=22, > HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 > Jan 29 22:24:11 Lindt2 kernel: [ 555.259794] Calibrating delay using > timer specific routine.. 1404.39 BogoMIPS (lpj=2808782) > Jan 29 22:24:11 Lindt2 kernel: [ 555.259864] Security Framework v1.0.0 > initialized > Jan 29 22:24:11 Lindt2 kernel: [ 555.259884] SELinux: Disabled at boot. > Jan 29 22:24:11 Lindt2 kernel: [ 555.259926] Mount-cache hash table > entries: 512 > Jan 29 22:24:11 Lindt2 kernel: [ 555.260265] CPU: L1 I cache: 16K, L1 D > cache: 16K > Jan 29 22:24:11 Lindt2 kernel: [ 555.260273] CPU: L2 cache: 256K > Jan 29 22:24:11 Lindt2 kernel: [ 555.260310] Compat vDSO mapped to > ffffe000. > Jan 29 22:24:11 Lindt2 kernel: [ 555.260348] Checking 'hlt' > instruction... OK. > Jan 29 22:24:11 Lindt2 kernel: [ 555.276035] SMP alternatives: > switching to UP code > Jan 29 22:24:11 Lindt2 kernel: [ 555.276447] Freeing SMP alternatives: > 11k freed > Jan 29 22:24:11 Lindt2 kernel: [ 555.277197] Early unpacking > initramfs... done > Jan 29 22:24:11 Lindt2 kernel: [ 556.233991] ACPI: Core revision 20070126 > Jan 29 22:24:11 Lindt2 kernel: [ 556.234227] ACPI: Looking for DSDT in > initramfs... error, file /DSDT.aml not found. > Jan 29 22:24:11 Lindt2 kernel: [ 556.237703] ACPI: setting ELCR to 0200 > (from 0820) > Jan 29 22:24:11 Lindt2 kernel: [ 556.241068] CPU0: Intel Pentium III > (Coppermine) stepping 06 > Jan 29 22:24:11 Lindt2 kernel: [ 556.241084] SMP motherboard not detected. > Jan 29 22:24:11 Lindt2 kernel: [ 556.241091] Local APIC not detected. > Using dummy APIC emulation. > Jan 29 22:24:11 Lindt2 kernel: [ 556.241202] Brought up 1 CPUs > Jan 29 22:24:11 Lindt2 kernel: [ 556.241542] Booting paravirtualized > kernel on bare hardware > Jan 29 22:24:11 Lindt2 kernel: [ 556.241689] Time: 3:19:10 Date: > 00/30/108 > Jan 29 22:24:11 Lindt2 kernel: [ 556.241763] NET: Registered protocol > family 16 > Jan 29 22:24:11 Lindt2 kernel: [ 556.242041] EISA bus registered > Jan 29 22:24:11 Lindt2 kernel: [ 556.242066] ACPI: bus type pci registered > Jan 29 22:24:11 Lindt2 kernel: [ 556.246024] PCI: PCI BIOS revision > 2.10 entry at 0xfc13e, last bus=1 > Jan 29 22:24:11 Lindt2 kernel: [ 556.246033] PCI: Using configuration > type 1 > Jan 29 22:24:11 Lindt2 kernel: [ 556.246039] Setting up standard PCI > resources > Jan 29 22:24:11 Lindt2 kernel: [ 556.268408] ACPI: Interpreter enabled > Jan 29 22:24:11 Lindt2 kernel: [ 556.268420] ACPI: (supports S0 S1 S3 > S4 S5) > Jan 29 22:24:11 Lindt2 kernel: [ 556.268469] ACPI: Using PIC for > interrupt routing > Jan 29 22:24:11 Lindt2 kernel: [ 556.307587] ACPI: PCI Root Bridge > [PCI0] (0000:00) > Jan 29 22:24:11 Lindt2 kernel: [ 556.308114] PCI quirk: region > 0800-083f claimed by PIIX4 ACPI > Jan 29 22:24:11 Lindt2 kernel: [ 556.308124] PCI quirk: region > 0840-084f claimed by PIIX4 SMB > Jan 29 22:24:11 Lindt2 kernel: [ 556.308135] PIIX4 devres B PIO at > 00e0-00e7 > Jan 29 22:24:11 Lindt2 kernel: [ 556.308142] PIIX4 devres C PIO at > 0850-085f > Jan 29 22:24:11 Lindt2 kernel: [ 556.381450] ACPI: PCI Interrupt Link > [LNKA] (IRQs 9 10 *11) > Jan 29 22:24:11 Lindt2 kernel: [ 556.381734] ACPI: PCI Interrupt Link > [LNKB] (IRQs *5 7) > Jan 29 22:24:11 Lindt2 kernel: [ 556.381972] ACPI: PCI Interrupt Link > [LNKC] (IRQs 9 10 11) *0, disabled. > Jan 29 22:24:11 Lindt2 kernel: [ 556.382253] ACPI: PCI Interrupt Link > [LNKD] (IRQs 5 7 9 10 *11) > Jan 29 22:24:11 Lindt2 kernel: [ 556.382572] ACPI: Power Resource > [PADA] (on) > Jan 29 22:24:11 Lindt2 kernel: [ 556.382594] Linux Plug and Play > Support v0.97 (c) Adam Belay > Jan 29 22:24:11 Lindt2 kernel: [ 556.382626] pnp: PnP ACPI init > Jan 29 22:24:11 Lindt2 kernel: [ 556.382654] ACPI: bus type pnp registered > Jan 29 22:24:11 Lindt2 kernel: [ 556.478922] pnp: PnP ACPI: found 15 > devices > Jan 29 22:24:11 Lindt2 kernel: [ 556.478931] ACPI: ACPI bus type pnp > unregistered > Jan 29 22:24:11 Lindt2 kernel: [ 556.478944] PnPBIOS: Disabled by ACPI PNP > Jan 29 22:24:11 Lindt2 kernel: [ 556.481026] PCI: Using ACPI for IRQ > routing > Jan 29 22:24:11 Lindt2 kernel: [ 556.481036] PCI: If a device doesn't > work, try "pci=routeirq". If it helps, post a report > Jan 29 22:24:11 Lindt2 kernel: [ 556.484082] NET: Registered protocol > family 8 > Jan 29 22:24:11 Lindt2 kernel: [ 556.484090] NET: Registered protocol > family 20 > Jan 29 22:24:11 Lindt2 kernel: [ 556.484283] pnp: 00:00: iomem range > 0x0-0x9fbff could not be reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484293] pnp: 00:00: iomem range > 0x9fc00-0x9ffff could not be reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484303] pnp: 00:00: iomem range > 0xc0000-0xcffff could not be reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484312] pnp: 00:00: iomem range > 0xf0000-0xfffff could not be reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484332] pnp: 00:02: ioport range > 0x4d0-0x4d1 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484354] pnp: 00:02: ioport range > 0x800-0x805 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484363] pnp: 00:02: ioport range > 0x808-0x80f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484381] pnp: 00:03: ioport range > 0x806-0x807 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484390] pnp: 00:03: ioport range > 0x850-0x853 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484399] pnp: 00:03: ioport range > 0x856-0x85f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484407] pnp: 00:03: ioport range > 0x810-0x83f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484416] pnp: 00:03: ioport range > 0x840-0x84f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484424] pnp: 00:03: ioport range > 0x600-0x67f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484433] pnp: 00:03: ioport range > 0x680-0x6ff has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484451] pnp: 00:04: ioport range > 0xf000-0xf0fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484460] pnp: 00:04: ioport range > 0xf100-0xf1fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484469] pnp: 00:04: ioport range > 0xf200-0xf2fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484478] pnp: 00:04: ioport range > 0xf400-0xf4fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484486] pnp: 00:04: ioport range > 0xf500-0xf5fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484496] pnp: 00:04: ioport range > 0xf600-0xf6fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484505] pnp: 00:04: ioport range > 0xf800-0xf8fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484513] pnp: 00:04: ioport range > 0xf900-0xf9fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484523] pnp: 00:04: iomem range > 0xed000000-0xedffffff has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484548] pnp: 00:09: ioport range > 0x3f0-0x3f1 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.487412] Time: tsc clocksource has > been installed. > Jan 29 22:24:11 Lindt2 kernel: [ 556.515434] PCI: Bridge: 0000:00:01.0 > Jan 29 22:24:11 Lindt2 kernel: [ 556.515441] IO window: e000-efff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515451] MEM window: > fd000000-feffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515459] PREFETCH window: > f8000000-fbffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515469] PCI: Bus 2, cardbus > bridge: 0000:00:03.0 > Jan 29 22:24:11 Lindt2 kernel: [ 556.515476] IO window: 00001000-000010ff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515485] IO window: 00001400-000014ff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515494] PREFETCH window: > 20000000-23ffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515502] MEM window: > 24000000-27ffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515511] PCI: Bus 6, cardbus > bridge: 0000:00:03.1 > Jan 29 22:24:11 Lindt2 kernel: [ 556.515517] IO window: 00001800-000018ff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515525] IO window: 00001c00-00001cff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515534] PREFETCH window: > 28000000-2bffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515542] MEM window: > 2c000000-2fffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515576] PCI: Enabling device > 0000:00:03.0 (0000 -> 0003) > Jan 29 22:24:11 Lindt2 kernel: [ 556.516060] ACPI: PCI Interrupt Link > [LNKD] enabled at IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 556.516078] ACPI: PCI Interrupt > 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 556.516105] PCI: Enabling device > 0000:00:03.1 (0000 -> 0003) > Jan 29 22:24:11 Lindt2 kernel: [ 556.516115] ACPI: PCI Interrupt > 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 556.516156] NET: Registered protocol > family 2 > Jan 29 22:24:11 Lindt2 kernel: [ 556.555517] IP route cache hash table > entries: 4096 (order: 2, 16384 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 556.555649] TCP established hash table > entries: 16384 (order: 5, 196608 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 556.556242] TCP bind hash table > entries: 16384 (order: 5, 131072 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 556.556878] TCP: Hash tables > configured (established 16384 bind 16384) > Jan 29 22:24:11 Lindt2 kernel: [ 556.556888] TCP reno registered > Jan 29 22:24:11 Lindt2 kernel: [ 556.567829] checking if image is > initramfs...<6>Switched to high resolution mode on CPU 0 > Jan 29 22:24:11 Lindt2 kernel: [ 557.394011] it is > Jan 29 22:24:11 Lindt2 kernel: [ 558.393925] Freeing initrd memory: > 7336k freed > Jan 29 22:24:11 Lindt2 kernel: [ 558.394885] audit: initializing > netlink socket (disabled) > Jan 29 22:24:11 Lindt2 kernel: [ 558.394921] audit(1201663151.812:1): > initialized > Jan 29 22:24:11 Lindt2 kernel: [ 558.401473] VFS: Disk quotas dquot_6.5.1 > Jan 29 22:24:11 Lindt2 kernel: [ 558.401684] Dquot-cache hash table > entries: 1024 (order 0, 4096 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 558.401987] io scheduler noop registered > Jan 29 22:24:11 Lindt2 kernel: [ 558.401996] io scheduler anticipatory > registered > Jan 29 22:24:11 Lindt2 kernel: [ 558.402002] io scheduler deadline > registered > Jan 29 22:24:11 Lindt2 kernel: [ 558.402070] io scheduler cfq > registered (default) > Jan 29 22:24:11 Lindt2 kernel: [ 558.402098] Limiting direct PCI/PCI > transfers. > Jan 29 22:24:11 Lindt2 kernel: [ 558.402559] isapnp: Scanning for PnP > cards... > Jan 29 22:24:11 Lindt2 kernel: [ 558.755433] isapnp: No Plug & Play > device found > Jan 29 22:24:11 Lindt2 kernel: [ 558.835126] Real Time Clock Driver v1.12ac > Jan 29 22:24:11 Lindt2 kernel: [ 558.835364] Serial: 8250/16550 driver > $Revision: 1.90 $ 4 ports, IRQ sharing enabled > Jan 29 22:24:11 Lindt2 kernel: [ 558.835524] serial8250: ttyS0 at I/O > 0x3f8 (irq = 4) is a 16550A > Jan 29 22:24:11 Lindt2 kernel: [ 558.837409] 00:0d: ttyS0 at I/O 0x3f8 > (irq = 4) is a 16550A > Jan 29 22:24:11 Lindt2 kernel: [ 558.839512] RAMDISK driver > initialized: 16 RAM disks of 65536K size 1024 blocksize > Jan 29 22:24:11 Lindt2 kernel: [ 558.840128] input: Macintosh mouse > button emulation as /class/input/input0 > Jan 29 22:24:11 Lindt2 kernel: [ 558.840359] PNP: PS/2 Controller > [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > Jan 29 22:24:11 Lindt2 kernel: [ 558.850556] serio: i8042 KBD port at > 0x60,0x64 irq 1 > Jan 29 22:24:11 Lindt2 kernel: [ 558.850573] serio: i8042 AUX port at > 0x60,0x64 irq 12 > Jan 29 22:24:11 Lindt2 kernel: [ 558.851071] mice: PS/2 mouse device > common for all mice > Jan 29 22:24:11 Lindt2 kernel: [ 558.851384] EISA: Probing bus 0 at eisa.0 > Jan 29 22:24:11 Lindt2 kernel: [ 558.851404] Cannot allocate resource > for EISA slot 1 > Jan 29 22:24:11 Lindt2 kernel: [ 558.851438] EISA: Detected 0 cards. > Jan 29 22:24:11 Lindt2 kernel: [ 558.851695] TCP cubic registered > Jan 29 22:24:11 Lindt2 kernel: [ 558.851737] NET: Registered protocol > family 1 > Jan 29 22:24:11 Lindt2 kernel: [ 558.851809] Using IPI No-Shortcut mode > Jan 29 22:24:11 Lindt2 kernel: [ 558.852224] Magic number: 8:808:311 > Jan 29 22:24:11 Lindt2 kernel: [ 558.852272] hash matches device ttyxe > Jan 29 22:24:11 Lindt2 kernel: [ 558.853730] Freeing unused kernel > memory: 364k freed > Jan 29 22:24:11 Lindt2 kernel: [ 558.882572] input: AT Translated Set 2 > keyboard as /class/input/input1 > Jan 29 22:24:11 Lindt2 kernel: [ 560.467719] AppArmor: AppArmor > initialized<5>audit(1201663153.812:2): type=1505 info="AppArmor > initialized" pid=1182 > Jan 29 22:24:11 Lindt2 kernel: [ 560.684836] fuse init (API version 7.8) > Jan 29 22:24:11 Lindt2 kernel: [ 560.699726] Failure registering > capabilities with primary security module. > Jan 29 22:24:11 Lindt2 kernel: [ 560.823853] ACPI: CPU0 (power states: > C1[C1] C2[C2]) > Jan 29 22:24:11 Lindt2 kernel: [ 560.852973] ACPI: Thermal Zone [THM] > (52 C) > Jan 29 22:24:11 Lindt2 kernel: [ 572.613669] SCSI subsystem initialized > Jan 29 22:24:11 Lindt2 kernel: [ 572.648407] scsi0 : ata_piix > Jan 29 22:24:11 Lindt2 kernel: [ 572.648527] scsi1 : ata_piix > Jan 29 22:24:11 Lindt2 kernel: [ 572.650889] ata1: PATA max UDMA/33 cmd > 0x000101f0 ctl 0x000103f6 bmdma 0x00010860 irq 14 > Jan 29 22:24:11 Lindt2 kernel: [ 572.650901] ata2: PATA max UDMA/33 cmd > 0x00010170 ctl 0x00010376 bmdma 0x00010868 irq 15 > Jan 29 22:24:11 Lindt2 kernel: [ 572.676555] usbcore: registered new > interface driver usbfs > Jan 29 22:24:11 Lindt2 kernel: [ 572.676633] usbcore: registered new > interface driver hub > Jan 29 22:24:11 Lindt2 kernel: [ 572.676696] usbcore: registered new > device driver usb > Jan 29 22:24:11 Lindt2 kernel: [ 572.680729] USB Universal Host > Controller Interface driver v3.0 > Jan 29 22:24:11 Lindt2 kernel: [ 572.813465] ata1.00: ATA-5: > IBM-DJSA-210, JS2OAB8A, max UDMA/66 > Jan 29 22:24:11 Lindt2 kernel: [ 572.813478] ata1.00: 19640880 sectors, > multi 8: LBA > Jan 29 22:24:11 Lindt2 kernel: [ 572.829439] ata1.00: configured for > UDMA/33 > Jan 29 22:24:11 Lindt2 kernel: [ 573.149083] ata2.00: ATAPI: TEAC > CD-ROM CD-224E, 3.7C, max UDMA/33 > Jan 29 22:24:11 Lindt2 kernel: [ 573.321090] ata2.00: configured for > UDMA/33 > Jan 29 22:24:11 Lindt2 kernel: [ 573.328841] scsi 0:0:0:0: > Direct-Access ATA IBM-DJSA-210 JS2O PQ: 0 ANSI: 5 > Jan 29 22:24:11 Lindt2 kernel: [ 573.329958] scsi 1:0:0:0: CD-ROM > TEAC CD-224E 3.7C PQ: 0 ANSI: 5 > Jan 29 22:24:11 Lindt2 kernel: [ 573.339391] ACPI: PCI Interrupt > 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 573.339424] uhci_hcd 0000:00:07.2: > UHCI Host Controller > Jan 29 22:24:11 Lindt2 kernel: [ 573.339706] uhci_hcd 0000:00:07.2: new > USB bus registered, assigned bus number 1 > Jan 29 22:24:11 Lindt2 kernel: [ 573.339751] uhci_hcd 0000:00:07.2: irq > 11, io base 0x0000dce0 > Jan 29 22:24:11 Lindt2 kernel: [ 573.340102] usb usb1: configuration #1 > chosen from 1 choice > Jan 29 22:24:11 Lindt2 kernel: [ 573.340180] hub 1-0:1.0: USB hub found > Jan 29 22:24:11 Lindt2 kernel: [ 573.340204] hub 1-0:1.0: 2 ports detected > Jan 29 22:24:11 Lindt2 kernel: [ 573.439368] Floppy drive(s): fd0 is 1.44M > Jan 29 22:24:11 Lindt2 kernel: [ 573.498991] FDC 0 is a post-1991 82077 > Jan 29 22:24:11 Lindt2 kernel: [ 573.752675] sd 0:0:0:0: [sda] 19640880 > 512-byte hardware sectors (10056 MB) > Jan 29 22:24:11 Lindt2 kernel: [ 573.756608] sd 0:0:0:0: [sda] Write > Protect is off > Jan 29 22:24:11 Lindt2 kernel: [ 573.764604] sd 0:0:0:0: [sda] Write > cache: enabled, read cache: enabled, doesn't support DPO or FUA > Jan 29 22:24:11 Lindt2 kernel: [ 573.772602] sd 0:0:0:0: [sda] 19640880 > 512-byte hardware sectors (10056 MB) > Jan 29 22:24:11 Lindt2 kernel: [ 573.776597] sd 0:0:0:0: [sda] Write > Protect is off > Jan 29 22:24:11 Lindt2 kernel: [ 573.784595] sd 0:0:0:0: [sda] Write > cache: enabled, read cache: enabled, doesn't support DPO or FUA > Jan 29 22:24:11 Lindt2 kernel: [ 573.784610] sda: sda1 sda2 < sda5 > > Jan 29 22:24:11 Lindt2 kernel: [ 574.182210] sd 0:0:0:0: [sda] Attached > SCSI disk > Jan 29 22:24:11 Lindt2 kernel: [ 574.195461] sd 0:0:0:0: Attached scsi > generic sg0 type 0 > Jan 29 22:24:11 Lindt2 kernel: [ 574.195518] scsi 1:0:0:0: Attached > scsi generic sg1 type 5 > Jan 29 22:24:11 Lindt2 kernel: [ 574.219225] sr0: scsi3-mmc drive: > 24x/24x cd/rw xa/form2 cdda tray > Jan 29 22:24:11 Lindt2 kernel: [ 574.219240] Uniform CD-ROM driver > Revision: 3.20 > Jan 29 22:24:11 Lindt2 kernel: [ 576.269171] Attempting manual resume > Jan 29 22:24:11 Lindt2 kernel: [ 576.915521] kjournald starting. > Commit interval 5 seconds > Jan 29 22:24:11 Lindt2 kernel: [ 576.915557] EXT3-fs: mounted > filesystem with ordered data mode. > Jan 29 22:24:11 Lindt2 kernel: [ 676.537513] Linux agpgart interface > v0.102 (c) Dave Jones > Jan 29 22:24:11 Lindt2 kernel: [ 676.555091] agpgart: Detected an Intel > 440BX Chipset. > Jan 29 22:24:11 Lindt2 kernel: [ 676.560132] agpgart: AGP aperture is > 64M @ 0xf4000000 > Jan 29 22:24:11 Lindt2 kernel: [ 676.585968] pci_hotplug: PCI Hot Plug > PCI Core version: 0.5 > Jan 29 22:24:11 Lindt2 kernel: [ 676.598036] shpchp: Standard Hot Plug > PCI Controller Driver version: 0.4 > Jan 29 22:24:11 Lindt2 kernel: [ 676.764242] Yenta: CardBus bridge > found at 0000:00:03.0 [1028:00b0] > Jan 29 22:24:11 Lindt2 kernel: [ 676.764270] Yenta: Using CSCINT to > route CSC interrupts to PCI > Jan 29 22:24:11 Lindt2 kernel: [ 676.764277] Yenta: Routing CardBus > interrupts to PCI > Jan 29 22:24:11 Lindt2 kernel: [ 676.764286] Yenta TI: socket > 0000:00:03.0, mfunc 0x01261222, devctl 0x64 > Jan 29 22:24:11 Lindt2 kernel: [ 677.004651] Yenta: ISA IRQ mask > 0x04b8, PCI irq 11 > Jan 29 22:24:11 Lindt2 kernel: [ 677.004662] Socket status: 30000020 > Jan 29 22:24:11 Lindt2 kernel: [ 677.005036] Yenta: CardBus bridge > found at 0000:00:03.1 [1028:00b0] > Jan 29 22:24:11 Lindt2 kernel: [ 677.005059] Yenta: Using CSCINT to > route CSC interrupts to PCI > Jan 29 22:24:11 Lindt2 kernel: [ 677.005066] Yenta: Routing CardBus > interrupts to PCI > Jan 29 22:24:11 Lindt2 kernel: [ 677.005076] Yenta TI: socket > 0000:00:03.1, mfunc 0x01261222, devctl 0x64 > Jan 29 22:24:11 Lindt2 kernel: [ 677.236558] Yenta: ISA IRQ mask > 0x04b8, PCI irq 11 > Jan 29 22:24:11 Lindt2 kernel: [ 677.236569] Socket status: 30000006 > Jan 29 22:24:11 Lindt2 kernel: [ 677.639850] pccard: CardBus card > inserted into slot 0 > Jan 29 22:24:11 Lindt2 kernel: [ 678.494143] piix4_smbus 0000:00:07.3: > Found 0000:00:07.3 device > Jan 29 22:24:11 Lindt2 kernel: [ 679.725199] martian loaded - 20061202 > Jan 29 22:24:11 Lindt2 kernel: [ 679.725360] ACPI: PCI Interrupt > 0000:00:10.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 679.725412] "martian_dev": added > device 11c1:448 BaseAddress = 0xd400, CommAddres = 0xdcd8, irq = 11 > Jan 29 22:24:11 Lindt2 kernel: [ 679.725451] PCI: Enabling device > 0000:02:00.0 (0000 -> 0003) > Jan 29 22:24:11 Lindt2 kernel: [ 679.725463] ACPI: PCI Interrupt > 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 679.725487] ACPI: PCI interrupt for > device 0000:02:00.0 disabled > Jan 29 22:24:11 Lindt2 kernel: [ 680.215764] "martian_dev": serving > irqs in module > Jan 29 22:24:11 Lindt2 kernel: [ 680.215780] "martian_dev": > martian_modem is attached. > Jan 29 22:24:11 Lindt2 kernel: [ 680.335149] input: PC Speaker as > /class/input/input2 > Jan 29 22:24:11 Lindt2 kernel: [ 680.944036] Synaptics Touchpad, model: > 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0 > Jan 29 22:24:11 Lindt2 kernel: [ 680.944054] serio: Synaptics > pass-through port at isa0060/serio1/input0 > Jan 29 22:24:11 Lindt2 kernel: [ 680.997344] input: SynPS/2 Synaptics > TouchPad as /class/input/input3 > Jan 29 22:24:11 Lindt2 kernel: [ 681.274935] parport_pc 00:0e: reported > by Plug and Play ACPI > Jan 29 22:24:11 Lindt2 kernel: [ 681.275011] parport0: PC-style at > 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] > Jan 29 22:24:11 Lindt2 kernel: [ 682.173452] ACPI: PCI Interrupt > 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 682.173931] eth0: Xircom cardbus > revision 3 at irq 11 > Jan 29 22:24:11 Lindt2 kernel: [ 682.831466] cs: IO port probe > 0x100-0x3af: excluding 0x200-0x207 > Jan 29 22:24:11 Lindt2 kernel: [ 682.832872] cs: IO port probe > 0x3e0-0x4ff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.833244] cs: IO port probe > 0x820-0x8ff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.833497] cs: IO port probe > 0xc00-0xcf7: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.834397] cs: IO port probe > 0xa00-0xaff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.849523] cs: IO port probe > 0x100-0x3af: excluding 0x200-0x207 > Jan 29 22:24:11 Lindt2 kernel: [ 682.850400] cs: IO port probe > 0x3e0-0x4ff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.850782] cs: IO port probe > 0x820-0x8ff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.851036] cs: IO port probe > 0xc00-0xcf7: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.851584] cs: IO port probe > 0xa00-0xaff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 683.173454] ACPI: PCI Interrupt Link > [LNKB] enabled at IRQ 5 > Jan 29 22:24:11 Lindt2 kernel: [ 683.173475] ACPI: PCI Interrupt > 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 > Jan 29 22:24:11 Lindt2 kernel: [ 687.332614] IBM TrackPoint firmware: > 0x0b, buttons: 2/3 > Jan 29 22:24:11 Lindt2 kernel: [ 687.601721] input: TPPS/2 IBM > TrackPoint as /class/input/input4 > Jan 29 22:24:11 Lindt2 kernel: [ 246.456000] Marking TSC unstable due > to: possible TSC halt in C2. > Jan 29 22:24:11 Lindt2 kernel: [ 246.460000] Time: acpi_pm clocksource > has been installed. > Jan 29 22:24:11 Lindt2 kernel: [ 246.836000] Clocksource tsc unstable > (delta = -3325516124 ns) > Jan 29 22:24:11 Lindt2 kernel: [ 291.120000] lp0: using parport0 > (interrupt-driven). > Jan 29 22:24:11 Lindt2 kernel: [ 291.228000] Adding 465844k swap on > /dev/sda5. Priority:-1 extents:1 across:465844k > Jan 29 22:24:11 Lindt2 kernel: [ 291.684000] EXT3 FS on sda1, internal > journal > Jan 29 22:24:11 Lindt2 kernel: [ 294.420000] ACPI: Video Device [VID] > (multi-head: yes rom: no post: no) > Jan 29 22:24:11 Lindt2 kernel: [ 294.952000] ACPI: Battery Slot [BAT0] > (battery present) > Jan 29 22:24:11 Lindt2 kernel: [ 294.952000] ACPI: Battery Slot [BAT1] > (battery absent) > Jan 29 22:24:11 Lindt2 kernel: [ 295.052000] input: Lid Switch as > /class/input/input5 > Jan 29 22:24:11 Lindt2 kernel: [ 295.052000] ACPI: Lid Switch [LID] > Jan 29 22:24:11 Lindt2 kernel: [ 295.076000] input: Power Button (CM) > as /class/input/input6 > Jan 29 22:24:11 Lindt2 kernel: [ 295.076000] ACPI: Power Button (CM) [PBTN] > Jan 29 22:24:11 Lindt2 kernel: [ 295.088000] input: Sleep Button (CM) > as /class/input/input7 > Jan 29 22:24:11 Lindt2 kernel: [ 295.088000] ACPI: Sleep Button (CM) [SBTN] > Jan 29 22:24:11 Lindt2 kernel: [ 295.420000] ACPI: ACPI Dock Station > Driver > Jan 29 22:24:11 Lindt2 kernel: [ 295.672000] ACPI: AC Adapter [AC] > (on-line) > Jan 29 22:24:12 Lindt2 kernel: [ 300.192000] ppdev: user-space parallel > port driver > Jan 29 22:24:13 Lindt2 kernel: [ 300.812000] xircom cardbus adaptor > found, registering as eth0, using irq 11 > Jan 29 22:24:13 Lindt2 kernel: [ 300.836000] audit(1201663452.920:3): > type=1503 operation="inode_permission" requested_mask="a" > denied_mask="a" name="/dev/tty" pid=4809 profile="/usr/sbin/cupsd" > Jan 29 22:24:13 Lindt2 kernel: [ 301.028000] Dell Inspiron machine > detected. Enabling interrupts during APM calls. > Jan 29 22:24:13 Lindt2 kernel: [ 301.028000] apm: BIOS version 1.2 > Flags 0x03 (Driver version 1.16ac) > Jan 29 22:24:13 Lindt2 kernel: [ 301.028000] apm: overridden by ACPI. > Jan 29 22:24:13 Lindt2 kernel: [ 301.312000] ondemand governor failed > to load due to too long transition latency > Jan 29 22:24:14 Lindt2 kernel: [ 301.544000] Failure registering > capabilities with primary security module. > Jan 29 22:24:14 Lindt2 dhcdbd: Started up. > Jan 29 22:24:14 Lindt2 kernel: [ 301.924000] Bluetooth: Core ver 2.11 > Jan 29 22:24:14 Lindt2 kernel: [ 301.924000] NET: Registered protocol > family 31 > Jan 29 22:24:14 Lindt2 kernel: [ 301.924000] Bluetooth: HCI device and > connection manager initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.924000] Bluetooth: HCI socket > layer initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.972000] Bluetooth: L2CAP ver 2.8 > Jan 29 22:24:14 Lindt2 kernel: [ 301.972000] Bluetooth: L2CAP socket > layer initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.996000] Bluetooth: RFCOMM socket > layer initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.996000] Bluetooth: RFCOMM TTY > layer initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.996000] Bluetooth: RFCOMM ver 1.8 > Jan 29 22:25:01 Lindt2 kernel: [ 348.888000] ondemand governor failed > to load due to too long transition latency > Jan 29 22:25:50 Lindt2 kernel: [ 397.724000] psmouse.c: TouchPad at > isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. > Jan 29 22:26:33 Lindt2 kernel: [ 441.348000] "martian_dev": > martian_modem is detached > Jan 29 22:34:30 Lindt2 kernel: [ 917.996000] usb 1-1: new full speed > USB device using uhci_hcd and address 2 > Jan 29 22:34:30 Lindt2 kernel: [ 918.168000] usb 1-1: configuration #1 > chosen from 1 choice > Jan 29 22:34:31 Lindt2 kernel: [ 918.480000] usbcore: registered new > interface driver libusual > Jan 29 22:34:31 Lindt2 kernel: [ 918.724000] Uniform Multi-Platform > E-IDE driver Revision: 7.00alpha2 > Jan 29 22:34:31 Lindt2 kernel: [ 918.724000] ide: Assuming 33MHz system > bus speed for PIO modes; override with idebus=xx > Jan 29 22:34:31 Lindt2 kernel: [ 918.768000] Initializing USB Mass > Storage driver... > Jan 29 22:34:31 Lindt2 kernel: [ 918.772000] scsi2 : SCSI emulation for > USB Mass Storage devices > Jan 29 22:34:31 Lindt2 kernel: [ 918.772000] usbcore: registered new > interface driver usb-storage > Jan 29 22:34:31 Lindt2 kernel: [ 918.772000] USB Mass Storage support > registered. > Jan 29 22:34:36 Lindt2 kernel: [ 923.776000] scsi 2:0:0:0: > Direct-Access SanDisk Cruzer Titanium 2000 PQ: 0 ANSI: 0 CCS > Jan 29 22:34:36 Lindt2 kernel: [ 923.788000] sd 2:0:0:0: [sdb] 1014784 > 512-byte hardware sectors (520 MB) > Jan 29 22:34:36 Lindt2 kernel: [ 923.788000] sd 2:0:0:0: [sdb] Write > Protect is off > Jan 29 22:34:36 Lindt2 kernel: [ 923.800000] sd 2:0:0:0: [sdb] 1014784 > 512-byte hardware sectors (520 MB) > Jan 29 22:34:36 Lindt2 kernel: [ 923.804000] sd 2:0:0:0: [sdb] Write > Protect is off > Jan 29 22:34:36 Lindt2 kernel: [ 923.804000] sdb: sdb1 > Jan 29 22:34:36 Lindt2 kernel: [ 923.856000] sd 2:0:0:0: [sdb] Attached > SCSI removable disk > Jan 29 22:34:36 Lindt2 kernel: [ 923.856000] sd 2:0:0:0: Attached scsi > generic sg2 type 0 > Jan 29 22:34:43 Lindt2 kernel: [ 931.468000] psmouse.c: TouchPad at > isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. > > > Jan 29 18:58:26 Lindt2 syslogd 1.4.1#21ubuntu3: restart. > Jan 29 19:10:03 Lindt2 kernel: [ 1599.712000] "martian_dev": martian_modem is detached > Jan 29 19:16:46 Lindt2 kernel: [ 2002.844000] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away. > Jan 29 19:16:49 Lindt2 kernel: [ 2005.800000] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away. > Jan 29 19:17:04 Lindt2 exiting on signal 15 > Jan 29 21:32:03 Lindt2 syslogd 1.4.1#21ubuntu3: restart. > Jan 29 21:32:04 Lindt2 kernel: Inspecting /boot/System.map-2.6.22-14-generic > Jan 29 21:32:04 Lindt2 kernel: Loaded 25445 symbols from /boot/System.map-2.6.22-14-generic. > Jan 29 21:32:04 Lindt2 kernel: Symbols match kernel version 2.6.22. > Jan 29 21:32:04 Lindt2 kernel: No module symbols loaded - kernel modules not enabled. > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] BIOS-provided physical RAM map: > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fdb000 (usable) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] BIOS-e820: 0000000017fdb000 - 0000000018000000 (reserved) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] 0MB HIGHMEM available. > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] 383MB LOWMEM available. > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Zone PFN ranges: > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] DMA 0 -> 4096 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Normal 4096 -> 98267 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] HighMem 98267 -> 98267 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] early_node_map[1] active PFN ranges > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] 0: 0 -> 98267 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] DMI 2.3 present. > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F4C80 checksum 0 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] ACPI: RSDP 000F4C80, 0014 (r0 DELL ) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] ACPI: RSDT 17FF0000, 0028 (r1 DELL CPi R 27D20B07 ASL 61) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] ACPI: FACP 17FF0400, 0074 (r1 DELL CPi R 27D20B07 ASL 61) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] ACPI: DSDT 17FF0800, 2ACA (r1 INT430 SYSFexxx 1001 MSFT 100000E) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] ACPI: FACS 17FFF800, 0040 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e7e00000) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Built 1 zonelists. Total pages: 97500 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Kernel command line: root=UUID=8e2f89e5-dc8d-4824-a5a7-f86bc4b8776c ro quiet splash > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Enabling fast FPU save and restore... done. > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Initializing CPU#0 > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) > Jan 29 21:32:04 Lindt2 kernel: [ 0.000000] Detected 701.614 MHz processor. > Jan 29 21:32:04 Lindt2 kernel: [ 18.270586] Console: colour VGA+ 80x25 > Jan 29 21:32:04 Lindt2 kernel: [ 18.271786] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Jan 29 21:32:04 Lindt2 kernel: [ 18.273179] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Jan 29 21:32:04 Lindt2 kernel: [ 18.315966] Memory: 377868k/393068k available (2015k kernel code, 14692k reserved, 916k data, 364k init, 0k highmem) > Jan 29 21:32:04 Lindt2 kernel: [ 18.315997] virtual kernel memory layout: > Jan 29 21:32:04 Lindt2 kernel: [ 18.316000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) > Jan 29 21:32:04 Lindt2 kernel: [ 18.316005] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > Jan 29 21:32:04 Lindt2 kernel: [ 18.316009] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB) > Jan 29 21:32:04 Lindt2 kernel: [ 18.316013] lowmem : 0xc0000000 - 0xd7fdb000 ( 383 MB) > Jan 29 21:32:04 Lindt2 kernel: [ 18.316018] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) > Jan 29 21:32:04 Lindt2 kernel: [ 18.316022] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) > Jan 29 21:32:04 Lindt2 kernel: [ 18.316026] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) > Jan 29 21:32:04 Lindt2 kernel: [ 18.316036] Checking if this processor honours the WP bit even in supervisor mode... Ok. > Jan 29 21:32:04 Lindt2 kernel: [ 18.316135] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 > Jan 29 21:32:04 Lindt2 kernel: [ 18.396141] Calibrating delay using timer specific routine.. 1404.41 BogoMIPS (lpj=2808838) > Jan 29 21:32:04 Lindt2 kernel: [ 18.396212] Security Framework v1.0.0 initialized > Jan 29 21:32:04 Lindt2 kernel: [ 18.396232] SELinux: Disabled at boot. > Jan 29 21:32:04 Lindt2 kernel: [ 18.396273] Mount-cache hash table entries: 512 > Jan 29 21:32:04 Lindt2 kernel: [ 18.396613] CPU: L1 I cache: 16K, L1 D cache: 16K > Jan 29 21:32:04 Lindt2 kernel: [ 18.396621] CPU: L2 cache: 256K > Jan 29 21:32:04 Lindt2 kernel: [ 18.396658] Compat vDSO mapped to ffffe000. > Jan 29 21:32:04 Lindt2 kernel: [ 18.396697] Checking 'hlt' instruction... OK. > Jan 29 21:32:04 Lindt2 kernel: [ 18.412383] SMP alternatives: switching to UP code > Jan 29 21:32:04 Lindt2 kernel: [ 18.412795] Freeing SMP alternatives: 11k freed > Jan 29 21:32:04 Lindt2 kernel: [ 18.413545] Early unpacking initramfs... done > Jan 29 21:32:04 Lindt2 kernel: [ 19.370362] ACPI: Core revision 20070126 > Jan 29 21:32:04 Lindt2 kernel: [ 19.370598] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. > Jan 29 21:32:04 Lindt2 kernel: [ 19.374081] ACPI: setting ELCR to 0200 (from 0820) > Jan 29 21:32:04 Lindt2 kernel: [ 19.377347] CPU0: Intel Pentium III (Coppermine) stepping 06 > Jan 29 21:32:04 Lindt2 kernel: [ 19.377363] SMP motherboard not detected. > Jan 29 21:32:04 Lindt2 kernel: [ 19.377370] Local APIC not detected. Using dummy APIC emulation. > Jan 29 21:32:04 Lindt2 kernel: [ 19.377481] Brought up 1 CPUs > Jan 29 21:32:04 Lindt2 kernel: [ 19.377817] Booting paravirtualized kernel on bare hardware > Jan 29 21:32:04 Lindt2 kernel: [ 19.377965] Time: 2:27:06 Date: 00/30/108 > Jan 29 21:32:04 Lindt2 kernel: [ 19.378037] NET: Registered protocol family 16 > Jan 29 21:32:04 Lindt2 kernel: [ 19.378314] EISA bus registered > Jan 29 21:32:04 Lindt2 kernel: [ 19.378338] ACPI: bus type pci registered > Jan 29 21:32:04 Lindt2 kernel: [ 19.382295] PCI: PCI BIOS revision 2.10 entry at 0xfc13e, last bus=1 > Jan 29 21:32:04 Lindt2 kernel: [ 19.382303] PCI: Using configuration type 1 > Jan 29 21:32:04 Lindt2 kernel: [ 19.382309] Setting up standard PCI resources > Jan 29 21:32:04 Lindt2 kernel: [ 19.408149] ACPI: Interpreter enabled > Jan 29 21:32:04 Lindt2 kernel: [ 19.408160] ACPI: (supports S0 S1 S3 S4 S5) > Jan 29 21:32:04 Lindt2 kernel: [ 19.408208] ACPI: Using PIC for interrupt routing > Jan 29 21:32:04 Lindt2 kernel: [ 19.447089] ACPI: PCI Root Bridge [PCI0] (0000:00) > Jan 29 21:32:04 Lindt2 kernel: [ 19.447613] PCI quirk: region 0800-083f claimed by PIIX4 ACPI > Jan 29 21:32:04 Lindt2 kernel: [ 19.447623] PCI quirk: region 0840-084f claimed by PIIX4 SMB > Jan 29 21:32:04 Lindt2 kernel: [ 19.447634] PIIX4 devres B PIO at 00e0-00e7 > Jan 29 21:32:04 Lindt2 kernel: [ 19.447641] PIIX4 devres C PIO at 0850-085f > Jan 29 21:32:04 Lindt2 kernel: [ 19.520212] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) > Jan 29 21:32:04 Lindt2 kernel: [ 19.520496] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) > Jan 29 21:32:04 Lindt2 kernel: [ 19.520733] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. > Jan 29 21:32:04 Lindt2 kernel: [ 19.521015] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) > Jan 29 21:32:04 Lindt2 kernel: [ 19.521332] ACPI: Power Resource [PADA] (on) > Jan 29 21:32:04 Lindt2 kernel: [ 19.521354] Linux Plug and Play Support v0.97 (c) Adam Belay > Jan 29 21:32:04 Lindt2 kernel: [ 19.521386] pnp: PnP ACPI init > Jan 29 21:32:04 Lindt2 kernel: [ 19.521415] ACPI: bus type pnp registered > Jan 29 21:32:04 Lindt2 kernel: [ 19.615813] pnp: PnP ACPI: found 15 devices > Jan 29 21:32:04 Lindt2 kernel: [ 19.615822] ACPI: ACPI bus type pnp unregistered > Jan 29 21:32:04 Lindt2 kernel: [ 19.615836] PnPBIOS: Disabled by ACPI PNP > Jan 29 21:32:04 Lindt2 kernel: [ 19.615993] PCI: Using ACPI for IRQ routing > Jan 29 21:32:04 Lindt2 kernel: [ 19.616002] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > Jan 29 21:32:04 Lindt2 kernel: [ 19.619032] NET: Registered protocol family 8 > Jan 29 21:32:04 Lindt2 kernel: [ 19.619039] NET: Registered protocol family 20 > Jan 29 21:32:04 Lindt2 kernel: [ 19.619230] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619241] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619250] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619259] pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619280] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619302] pnp: 00:02: ioport range 0x800-0x805 has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619311] pnp: 00:02: ioport range 0x808-0x80f has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619329] pnp: 00:03: ioport range 0x806-0x807 has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619338] pnp: 00:03: ioport range 0x850-0x853 has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619347] pnp: 00:03: ioport range 0x856-0x85f has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619356] pnp: 00:03: ioport range 0x810-0x83f has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619364] pnp: 00:03: ioport range 0x840-0x84f has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619373] pnp: 00:03: ioport range 0x600-0x67f has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619381] pnp: 00:03: ioport range 0x680-0x6ff has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619399] pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619408] pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619417] pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619426] pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619434] pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619443] pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619452] pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619461] pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619471] pnp: 00:04: iomem range 0xed000000-0xedffffff has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619495] pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved > Jan 29 21:32:04 Lindt2 kernel: [ 19.619763] Time: tsc clocksource has been installed. > Jan 29 21:32:04 Lindt2 kernel: [ 19.650416] PCI: Bridge: 0000:00:01.0 > Jan 29 21:32:04 Lindt2 kernel: [ 19.650424] IO window: e000-efff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650433] MEM window: fd000000-feffffff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650442] PREFETCH window: f8000000-fbffffff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650452] PCI: Bus 2, cardbus bridge: 0000:00:03.0 > Jan 29 21:32:04 Lindt2 kernel: [ 19.650459] IO window: 00001000-000010ff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650467] IO window: 00001400-000014ff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650476] PREFETCH window: 20000000-23ffffff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650484] MEM window: 24000000-27ffffff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650493] PCI: Bus 6, cardbus bridge: 0000:00:03.1 > Jan 29 21:32:04 Lindt2 kernel: [ 19.650499] IO window: 00001800-000018ff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650507] IO window: 00001c00-00001cff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650516] PREFETCH window: 28000000-2bffffff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650524] MEM window: 2c000000-2fffffff > Jan 29 21:32:04 Lindt2 kernel: [ 19.650558] PCI: Enabling device 0000:00:03.0 (0000 -> 0003) > Jan 29 21:32:04 Lindt2 kernel: [ 19.651040] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 > Jan 29 21:32:04 Lindt2 kernel: [ 19.651058] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 21:32:04 Lindt2 kernel: [ 19.651085] PCI: Enabling device 0000:00:03.1 (0000 -> 0003) > Jan 29 21:32:04 Lindt2 kernel: [ 19.651095] ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 21:32:04 Lindt2 kernel: [ 19.651138] NET: Registered protocol family 2 > Jan 29 21:32:04 Lindt2 kernel: [ 19.687866] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > Jan 29 21:32:04 Lindt2 kernel: [ 19.687998] TCP established hash table entries: 16384 (order: 5, 196608 bytes) > Jan 29 21:32:04 Lindt2 kernel: [ 19.688590] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > Jan 29 21:32:04 Lindt2 kernel: [ 19.689228] TCP: Hash tables configured (established 16384 bind 16384) > Jan 29 21:32:04 Lindt2 kernel: [ 19.689237] TCP reno registered > Jan 29 21:32:04 Lindt2 kernel: [ 19.700177] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 > Jan 29 21:32:04 Lindt2 kernel: [ 20.526349] it is > Jan 29 21:32:04 Lindt2 kernel: [ 21.526448] Freeing initrd memory: 7336k freed > Jan 29 21:32:04 Lindt2 kernel: [ 21.527404] audit: initializing netlink socket (disabled) > Jan 29 21:32:04 Lindt2 kernel: [ 21.527440] audit(1201660027.808:1): initialized > Jan 29 21:32:04 Lindt2 kernel: [ 21.533951] VFS: Disk quotas dquot_6.5.1 > Jan 29 21:32:04 Lindt2 kernel: [ 21.534162] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Jan 29 21:32:04 Lindt2 kernel: [ 21.534460] io scheduler noop registered > Jan 29 21:32:04 Lindt2 kernel: [ 21.534469] io scheduler anticipatory registered > Jan 29 21:32:04 Lindt2 kernel: [ 21.534475] io scheduler deadline registered > Jan 29 21:32:04 Lindt2 kernel: [ 21.534542] io scheduler cfq registered (default) > Jan 29 21:32:04 Lindt2 kernel: [ 21.534569] Limiting direct PCI/PCI transfers. > Jan 29 21:32:04 Lindt2 kernel: [ 21.535081] isapnp: Scanning for PnP cards... > Jan 29 21:32:04 Lindt2 kernel: [ 21.887793] isapnp: No Plug & Play device found > Jan 29 21:32:04 Lindt2 kernel: [ 21.972398] Real Time Clock Driver v1.12ac > Jan 29 21:32:04 Lindt2 kernel: [ 21.972633] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > Jan 29 21:32:04 Lindt2 kernel: [ 21.972791] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Jan 29 21:32:04 Lindt2 kernel: [ 21.974706] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Jan 29 21:32:04 Lindt2 kernel: [ 21.976868] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize > Jan 29 21:32:04 Lindt2 kernel: [ 21.977490] input: Macintosh mouse button emulation as /class/input/input0 > Jan 29 21:32:04 Lindt2 kernel: [ 21.977721] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > Jan 29 21:32:04 Lindt2 kernel: [ 21.987252] serio: i8042 KBD port at 0x60,0x64 irq 1 > Jan 29 21:32:04 Lindt2 kernel: [ 21.987268] serio: i8042 AUX port at 0x60,0x64 irq 12 > Jan 29 21:32:04 Lindt2 kernel: [ 21.987764] mice: PS/2 mouse device common for all mice > Jan 29 21:32:04 Lindt2 kernel: [ 21.988068] EISA: Probing bus 0 at eisa.0 > Jan 29 21:32:04 Lindt2 kernel: [ 21.988089] Cannot allocate resource for EISA slot 1 > Jan 29 21:32:04 Lindt2 kernel: [ 21.988123] EISA: Detected 0 cards. > Jan 29 21:32:04 Lindt2 kernel: [ 21.988380] TCP cubic registered > Jan 29 21:32:04 Lindt2 kernel: [ 21.988424] NET: Registered protocol family 1 > Jan 29 21:32:04 Lindt2 kernel: [ 21.988509] Using IPI No-Shortcut mode > Jan 29 21:32:04 Lindt2 kernel: [ 21.988923] Magic number: 8:358:461 > Jan 29 21:32:04 Lindt2 kernel: [ 21.990410] Freeing unused kernel memory: 364k freed > Jan 29 21:32:04 Lindt2 kernel: [ 22.018930] input: AT Translated Set 2 keyboard as /class/input/input1 > Jan 29 21:32:04 Lindt2 kernel: [ 23.695540] AppArmor: AppArmor initialized<5>audit(1201660030.308:2): type=1505 info="AppArmor initialized" pid=1182 > Jan 29 21:32:04 Lindt2 kernel: [ 23.813251] fuse init (API version 7.8) > Jan 29 21:32:04 Lindt2 kernel: [ 23.828175] Failure registering capabilities with primary security module. > Jan 29 21:32:04 Lindt2 kernel: [ 23.952151] ACPI: CPU0 (power states: C1[C1] C2[C2]) > Jan 29 21:32:04 Lindt2 kernel: [ 23.979791] ACPI: Thermal Zone [THM] (35 C) > Jan 29 21:32:04 Lindt2 kernel: [ 35.088072] SCSI subsystem initialized > Jan 29 21:32:04 Lindt2 kernel: [ 35.122774] scsi0 : ata_piix > Jan 29 21:32:04 Lindt2 kernel: [ 35.122889] scsi1 : ata_piix > Jan 29 21:32:04 Lindt2 kernel: [ 35.125391] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00010860 irq 14 > Jan 29 21:32:04 Lindt2 kernel: [ 35.125403] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00010868 irq 15 > Jan 29 21:32:04 Lindt2 kernel: [ 35.302082] ata1.00: ATA-5: IBM-DJSA-210, JS2OAB8A, max UDMA/66 > Jan 29 21:32:04 Lindt2 kernel: [ 35.302096] ata1.00: 19640880 sectors, multi 8: LBA > Jan 29 21:32:04 Lindt2 kernel: [ 35.318052] ata1.00: configured for UDMA/33 > Jan 29 21:32:04 Lindt2 kernel: [ 35.445983] usbcore: registered new interface driver usbfs > Jan 29 21:32:04 Lindt2 kernel: [ 35.446060] usbcore: registered new interface driver hub > Jan 29 21:32:04 Lindt2 kernel: [ 35.446122] usbcore: registered new device driver usb > Jan 29 21:32:04 Lindt2 kernel: [ 35.450182] USB Universal Host Controller Interface driver v3.0 > Jan 29 21:32:04 Lindt2 kernel: [ 35.637625] ata2.00: ATAPI: TEAC CD-ROM CD-224E, 3.7C, max UDMA/33 > Jan 29 21:32:04 Lindt2 kernel: [ 35.809661] ata2.00: configured for UDMA/33 > Jan 29 21:32:04 Lindt2 kernel: [ 35.817543] scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-210 JS2O PQ: 0 ANSI: 5 > Jan 29 21:32:04 Lindt2 kernel: [ 35.818718] scsi 1:0:0:0: CD-ROM TEAC CD-224E 3.7C PQ: 0 ANSI: 5 > Jan 29 21:32:04 Lindt2 kernel: [ 35.828498] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 21:32:04 Lindt2 kernel: [ 35.828533] uhci_hcd 0000:00:07.2: UHCI Host Controller > Jan 29 21:32:04 Lindt2 kernel: [ 35.828830] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 > Jan 29 21:32:04 Lindt2 kernel: [ 35.828875] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0 > Jan 29 21:32:04 Lindt2 kernel: [ 35.829233] usb usb1: configuration #1 chosen from 1 choice > Jan 29 21:32:04 Lindt2 kernel: [ 35.829311] hub 1-0:1.0: USB hub found > Jan 29 21:32:04 Lindt2 kernel: [ 35.829376] hub 1-0:1.0: 2 ports detected > Jan 29 21:32:04 Lindt2 kernel: [ 36.673298] Floppy drive(s): fd0 is 1.44M > Jan 29 21:32:04 Lindt2 kernel: [ 36.727140] FDC 0 is a post-1991 82077 > Jan 29 21:32:04 Lindt2 kernel: [ 36.984782] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray > Jan 29 21:32:04 Lindt2 kernel: [ 36.984798] Uniform CD-ROM driver Revision: 3.20 > Jan 29 21:32:04 Lindt2 kernel: [ 36.998163] scsi 0:0:0:0: Attached scsi generic sg0 type 0 > Jan 29 21:32:04 Lindt2 kernel: [ 36.998222] sr 1:0:0:0: Attached scsi generic sg1 type 5 > Jan 29 21:32:04 Lindt2 kernel: [ 37.176868] sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB) > Jan 29 21:32:04 Lindt2 kernel: [ 37.180823] sd 0:0:0:0: [sda] Write Protect is off > Jan 29 21:32:04 Lindt2 kernel: [ 37.188819] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Jan 29 21:32:04 Lindt2 kernel: [ 37.196814] sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB) > Jan 29 21:32:04 Lindt2 kernel: [ 37.200810] sd 0:0:0:0: [sda] Write Protect is off > Jan 29 21:32:04 Lindt2 kernel: [ 37.208807] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Jan 29 21:32:04 Lindt2 kernel: [ 37.208826] sda: sda1 sda2 < sda5 > > Jan 29 21:32:04 Lindt2 kernel: [ 37.613034] sd 0:0:0:0: [sda] Attached SCSI disk > Jan 29 21:32:04 Lindt2 kernel: [ 38.796343] Attempting manual resume > Jan 29 21:32:04 Lindt2 kernel: [ 39.444083] kjournald starting. Commit interval 5 seconds > Jan 29 21:32:04 Lindt2 kernel: [ 39.444119] EXT3-fs: mounted filesystem with ordered data mode. > Jan 29 21:32:04 Lindt2 kernel: [ 139.300294] Linux agpgart interface v0.102 (c) Dave Jones > Jan 29 21:32:04 Lindt2 kernel: [ 139.340948] agpgart: Detected an Intel 440BX Chipset. > Jan 29 21:32:04 Lindt2 kernel: [ 139.346042] agpgart: AGP aperture is 64M @ 0xf4000000 > Jan 29 21:32:04 Lindt2 kernel: [ 139.436234] Yenta: CardBus bridge found at 0000:00:03.0 [1028:00b0] > Jan 29 21:32:04 Lindt2 kernel: [ 139.436262] Yenta: Using CSCINT to route CSC interrupts to PCI > Jan 29 21:32:04 Lindt2 kernel: [ 139.436269] Yenta: Routing CardBus interrupts to PCI > Jan 29 21:32:04 Lindt2 kernel: [ 139.436278] Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x64 > Jan 29 21:32:04 Lindt2 kernel: [ 139.448749] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > Jan 29 21:32:04 Lindt2 kernel: [ 139.665027] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 > Jan 29 21:32:04 Lindt2 kernel: [ 139.665038] Socket status: 30000020 > Jan 29 21:32:04 Lindt2 kernel: [ 139.665416] Yenta: CardBus bridge found at 0000:00:03.1 [1028:00b0] > Jan 29 21:32:04 Lindt2 kernel: [ 139.665439] Yenta: Using CSCINT to route CSC interrupts to PCI > Jan 29 21:32:04 Lindt2 kernel: [ 139.665446] Yenta: Routing CardBus interrupts to PCI > Jan 29 21:32:04 Lindt2 kernel: [ 139.665456] Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x64 > Jan 29 21:32:04 Lindt2 kernel: [ 139.900936] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 > Jan 29 21:32:04 Lindt2 kernel: [ 139.900948] Socket status: 30000006 > Jan 29 21:32:04 Lindt2 kernel: [ 139.916169] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > Jan 29 21:32:04 Lindt2 kernel: [ 139.917140] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device > Jan 29 21:32:04 Lindt2 kernel: [ 140.300193] pccard: CardBus card inserted into slot 0 > Jan 29 21:32:04 Lindt2 kernel: [ 140.631187] martian loaded - 20061202 > Jan 29 21:32:04 Lindt2 kernel: [ 140.631346] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 21:32:04 Lindt2 kernel: [ 140.631394] "martian_dev": added device 11c1:448 BaseAddress = 0xd400, CommAddres = 0xdcd8, irq = 11 > Jan 29 21:32:04 Lindt2 kernel: [ 140.631432] PCI: Enabling device 0000:02:00.0 (0000 -> 0003) > Jan 29 21:32:04 Lindt2 kernel: [ 140.631443] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 21:32:04 Lindt2 kernel: [ 140.631467] ACPI: PCI interrupt for device 0000:02:00.0 disabled > Jan 29 21:32:04 Lindt2 kernel: [ 140.885399] "martian_dev": serving irqs in module > Jan 29 21:32:04 Lindt2 kernel: [ 140.885416] "martian_dev": martian_modem is attached. > Jan 29 21:32:04 Lindt2 kernel: [ 142.241525] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 > Jan 29 21:32:04 Lindt2 kernel: [ 142.241546] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 > Jan 29 21:32:04 Lindt2 kernel: [ 143.276668] input: PC Speaker as /class/input/input2 > Jan 29 21:32:04 Lindt2 kernel: [ 143.594174] Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0 > Jan 29 21:32:04 Lindt2 kernel: [ 143.594191] serio: Synaptics pass-through port at isa0060/serio1/input0 > Jan 29 21:32:04 Lindt2 kernel: [ 143.645939] input: SynPS/2 Synaptics TouchPad as /class/input/input3 > Jan 29 21:32:04 Lindt2 kernel: [ 144.132417] parport_pc 00:0e: reported by Plug and Play ACPI > Jan 29 21:32:04 Lindt2 kernel: [ 144.132493] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] > Jan 29 21:32:04 Lindt2 kernel: [ 144.858667] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 21:32:04 Lindt2 kernel: [ 144.859152] eth0: Xircom cardbus revision 3 at irq 11 > Jan 29 21:32:04 Lindt2 kernel: [ 145.089844] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 > Jan 29 21:32:04 Lindt2 kernel: [ 145.090694] cs: IO port probe 0x3e0-0x4ff: clean. > Jan 29 21:32:04 Lindt2 kernel: [ 145.091066] cs: IO port probe 0x820-0x8ff: clean. > Jan 29 21:32:04 Lindt2 kernel: [ 145.091321] cs: IO port probe 0xc00-0xcf7: clean. > Jan 29 21:32:04 Lindt2 kernel: [ 145.091867] cs: IO port probe 0xa00-0xaff: clean. > Jan 29 21:32:04 Lindt2 kernel: [ 145.093505] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 > Jan 29 21:32:04 Lindt2 kernel: [ 145.094369] cs: IO port probe 0x3e0-0x4ff: clean. > Jan 29 21:32:04 Lindt2 kernel: [ 145.095184] cs: IO port probe 0x820-0x8ff: clean. > Jan 29 21:32:04 Lindt2 kernel: [ 145.095436] cs: IO port probe 0xc00-0xcf7: clean. > Jan 29 21:32:04 Lindt2 kernel: [ 145.096277] cs: IO port probe 0xa00-0xaff: clean. > Jan 29 21:32:04 Lindt2 kernel: [ 149.814848] IBM TrackPoint firmware: 0x0b, buttons: 2/3 > Jan 29 21:32:04 Lindt2 kernel: [ 150.081715] input: TPPS/2 IBM TrackPoint as /class/input/input4 > Jan 29 21:32:04 Lindt2 kernel: [ 246.276000] Marking TSC unstable due to: possible TSC halt in C2. > Jan 29 21:32:04 Lindt2 kernel: [ 246.280000] Time: acpi_pm clocksource has been installed. > Jan 29 21:32:04 Lindt2 kernel: [ 246.336000] Clocksource tsc unstable (delta = -1118196685 ns) > Jan 29 21:32:04 Lindt2 kernel: [ 290.052000] lp0: using parport0 (interrupt-driven). > Jan 29 21:32:04 Lindt2 kernel: [ 290.160000] Adding 465844k swap on /dev/sda5. Priority:-1 extents:1 across:465844k > Jan 29 21:32:04 Lindt2 kernel: [ 290.616000] EXT3 FS on sda1, internal journal > Jan 29 21:32:04 Lindt2 kernel: [ 293.308000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > Jan 29 21:32:04 Lindt2 kernel: [ 293.836000] ACPI: Battery Slot [BAT0] (battery present) > Jan 29 21:32:04 Lindt2 kernel: [ 293.836000] ACPI: Battery Slot [BAT1] (battery absent) > Jan 29 21:32:04 Lindt2 kernel: [ 294.020000] input: Lid Switch as /class/input/input5 > Jan 29 21:32:04 Lindt2 kernel: [ 294.020000] ACPI: Lid Switch [LID] > Jan 29 21:32:04 Lindt2 kernel: [ 294.072000] input: Power Button (CM) as /class/input/input6 > Jan 29 21:32:04 Lindt2 kernel: [ 294.072000] ACPI: Power Button (CM) [PBTN] > Jan 29 21:32:04 Lindt2 kernel: [ 294.100000] input: Sleep Button (CM) as /class/input/input7 > Jan 29 21:32:04 Lindt2 kernel: [ 294.100000] ACPI: Sleep Button (CM) [SBTN] > Jan 29 21:32:04 Lindt2 kernel: [ 294.336000] ACPI: ACPI Dock Station Driver > Jan 29 21:32:04 Lindt2 kernel: [ 294.576000] ACPI: AC Adapter [AC] (on-line) > Jan 29 21:32:05 Lindt2 kernel: [ 299.228000] ppdev: user-space parallel port driver > Jan 29 21:32:05 Lindt2 kernel: [ 299.396000] xircom cardbus adaptor found, registering as eth0, using irq 11 > Jan 29 21:32:06 Lindt2 kernel: [ 299.736000] audit(1201660325.853:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4831 profile="/usr/sbin/cupsd" > Jan 29 21:32:06 Lindt2 kernel: [ 299.888000] Dell Inspiron machine detected. Enabling interrupts during APM calls. > Jan 29 21:32:06 Lindt2 kernel: [ 299.888000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) > Jan 29 21:32:06 Lindt2 kernel: [ 299.888000] apm: overridden by ACPI. > Jan 29 21:32:06 Lindt2 kernel: [ 300.168000] ondemand governor failed to load due to too long transition latency > Jan 29 21:32:06 Lindt2 kernel: [ 300.400000] Failure registering capabilities with primary security module. > Jan 29 21:32:07 Lindt2 dhcdbd: Started up. > Jan 29 21:32:07 Lindt2 kernel: [ 300.768000] Bluetooth: Core ver 2.11 > Jan 29 21:32:07 Lindt2 kernel: [ 300.768000] NET: Registered protocol family 31 > Jan 29 21:32:07 Lindt2 kernel: [ 300.768000] Bluetooth: HCI device and connection manager initialized > Jan 29 21:32:07 Lindt2 kernel: [ 300.768000] Bluetooth: HCI socket layer initialized > Jan 29 21:32:07 Lindt2 kernel: [ 300.816000] Bluetooth: L2CAP ver 2.8 > Jan 29 21:32:07 Lindt2 kernel: [ 300.816000] Bluetooth: L2CAP socket layer initialized > Jan 29 21:32:07 Lindt2 kernel: [ 300.840000] Bluetooth: RFCOMM socket layer initialized > Jan 29 21:32:07 Lindt2 kernel: [ 300.840000] Bluetooth: RFCOMM TTY layer initialized > Jan 29 21:32:07 Lindt2 kernel: [ 300.840000] Bluetooth: RFCOMM ver 1.8 > Jan 29 21:32:48 Lindt2 kernel: [ 341.536000] ondemand governor failed to load due to too long transition latency > Jan 29 21:33:28 Lindt2 kernel: [ 381.500000] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away. > Jan 29 21:34:17 Lindt2 kernel: [ 430.904000] NET: Registered protocol family 10 > Jan 29 21:34:17 Lindt2 kernel: [ 430.904000] lo: Disabled Privacy Extensions > Jan 29 21:35:40 Lindt2 kernel: [ 514.324000] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away. > Jan 29 21:38:01 Lindt2 kernel: [ 654.784000] "martian_dev": martian_modem is detached > Jan 29 21:41:05 Lindt2 kernel: [ 839.292000] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away. > Jan 29 21:41:12 Lindt2 kernel: [ 846.380000] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. > Jan 29 21:52:04 Lindt2 -- MARK -- > Jan 29 22:12:04 Lindt2 -- MARK -- > Jan 29 22:18:36 Lindt2 exiting on signal 15 > Jan 29 22:24:10 Lindt2 syslogd 1.4.1#21ubuntu3: restart. > Jan 29 22:24:11 Lindt2 kernel: Inspecting /boot/System.map-2.6.22-14-generic > Jan 29 22:24:11 Lindt2 kernel: Loaded 25445 symbols from /boot/System.map-2.6.22-14-generic. > Jan 29 22:24:11 Lindt2 kernel: Symbols match kernel version 2.6.22. > Jan 29 22:24:11 Lindt2 kernel: No module symbols loaded - kernel modules not enabled. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-provided physical RAM map: > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fdb000 (usable) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: 0000000017fdb000 - 0000000018000000 (reserved) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] 0MB HIGHMEM available. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] 383MB LOWMEM available. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Zone PFN ranges: > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] DMA 0 -> 4096 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Normal 4096 -> 98267 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] HighMem 98267 -> 98267 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] early_node_map[1] active PFN ranges > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] 0: 0 -> 98267 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] DMI 2.3 present. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F4C80 checksum 0 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: RSDP 000F4C80, 0014 (r0 DELL ) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: RSDT 17FF0000, 0028 (r1 DELL CPi R 27D20B07 ASL 61) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: FACP 17FF0400, 0074 (r1 DELL CPi R 27D20B07 ASL 61) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: DSDT 17FF0800, 2ACA (r1 INT430 SYSFexxx 1001 MSFT 100000E) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: FACS 17FFF800, 0040 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e7e00000) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Built 1 zonelists. Total pages: 97500 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Kernel command line: root=UUID=8e2f89e5-dc8d-4824-a5a7-f86bc4b8776c ro quiet splash > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Enabling fast FPU save and restore... done. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Initializing CPU#0 > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 0.000000] Detected 701.615 MHz processor. > Jan 29 22:24:11 Lindt2 kernel: [ 555.134207] Console: colour VGA+ 80x25 > Jan 29 22:24:11 Lindt2 kernel: [ 555.135407] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 555.136829] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179617] Memory: 377868k/393068k available (2015k kernel code, 14692k reserved, 916k data, 364k init, 0k highmem) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179647] virtual kernel memory layout: > Jan 29 22:24:11 Lindt2 kernel: [ 555.179651] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179655] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179660] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179664] lowmem : 0xc0000000 - 0xd7fdb000 ( 383 MB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179668] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179673] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179677] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) > Jan 29 22:24:11 Lindt2 kernel: [ 555.179687] Checking if this processor honours the WP bit even in supervisor mode... Ok. > Jan 29 22:24:11 Lindt2 kernel: [ 555.179787] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 > Jan 29 22:24:11 Lindt2 kernel: [ 555.259794] Calibrating delay using timer specific routine.. 1404.39 BogoMIPS (lpj=2808782) > Jan 29 22:24:11 Lindt2 kernel: [ 555.259864] Security Framework v1.0.0 initialized > Jan 29 22:24:11 Lindt2 kernel: [ 555.259884] SELinux: Disabled at boot. > Jan 29 22:24:11 Lindt2 kernel: [ 555.259926] Mount-cache hash table entries: 512 > Jan 29 22:24:11 Lindt2 kernel: [ 555.260265] CPU: L1 I cache: 16K, L1 D cache: 16K > Jan 29 22:24:11 Lindt2 kernel: [ 555.260273] CPU: L2 cache: 256K > Jan 29 22:24:11 Lindt2 kernel: [ 555.260310] Compat vDSO mapped to ffffe000. > Jan 29 22:24:11 Lindt2 kernel: [ 555.260348] Checking 'hlt' instruction... OK. > Jan 29 22:24:11 Lindt2 kernel: [ 555.276035] SMP alternatives: switching to UP code > Jan 29 22:24:11 Lindt2 kernel: [ 555.276447] Freeing SMP alternatives: 11k freed > Jan 29 22:24:11 Lindt2 kernel: [ 555.277197] Early unpacking initramfs... done > Jan 29 22:24:11 Lindt2 kernel: [ 556.233991] ACPI: Core revision 20070126 > Jan 29 22:24:11 Lindt2 kernel: [ 556.234227] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. > Jan 29 22:24:11 Lindt2 kernel: [ 556.237703] ACPI: setting ELCR to 0200 (from 0820) > Jan 29 22:24:11 Lindt2 kernel: [ 556.241068] CPU0: Intel Pentium III (Coppermine) stepping 06 > Jan 29 22:24:11 Lindt2 kernel: [ 556.241084] SMP motherboard not detected. > Jan 29 22:24:11 Lindt2 kernel: [ 556.241091] Local APIC not detected. Using dummy APIC emulation. > Jan 29 22:24:11 Lindt2 kernel: [ 556.241202] Brought up 1 CPUs > Jan 29 22:24:11 Lindt2 kernel: [ 556.241542] Booting paravirtualized kernel on bare hardware > Jan 29 22:24:11 Lindt2 kernel: [ 556.241689] Time: 3:19:10 Date: 00/30/108 > Jan 29 22:24:11 Lindt2 kernel: [ 556.241763] NET: Registered protocol family 16 > Jan 29 22:24:11 Lindt2 kernel: [ 556.242041] EISA bus registered > Jan 29 22:24:11 Lindt2 kernel: [ 556.242066] ACPI: bus type pci registered > Jan 29 22:24:11 Lindt2 kernel: [ 556.246024] PCI: PCI BIOS revision 2.10 entry at 0xfc13e, last bus=1 > Jan 29 22:24:11 Lindt2 kernel: [ 556.246033] PCI: Using configuration type 1 > Jan 29 22:24:11 Lindt2 kernel: [ 556.246039] Setting up standard PCI resources > Jan 29 22:24:11 Lindt2 kernel: [ 556.268408] ACPI: Interpreter enabled > Jan 29 22:24:11 Lindt2 kernel: [ 556.268420] ACPI: (supports S0 S1 S3 S4 S5) > Jan 29 22:24:11 Lindt2 kernel: [ 556.268469] ACPI: Using PIC for interrupt routing > Jan 29 22:24:11 Lindt2 kernel: [ 556.307587] ACPI: PCI Root Bridge [PCI0] (0000:00) > Jan 29 22:24:11 Lindt2 kernel: [ 556.308114] PCI quirk: region 0800-083f claimed by PIIX4 ACPI > Jan 29 22:24:11 Lindt2 kernel: [ 556.308124] PCI quirk: region 0840-084f claimed by PIIX4 SMB > Jan 29 22:24:11 Lindt2 kernel: [ 556.308135] PIIX4 devres B PIO at 00e0-00e7 > Jan 29 22:24:11 Lindt2 kernel: [ 556.308142] PIIX4 devres C PIO at 0850-085f > Jan 29 22:24:11 Lindt2 kernel: [ 556.381450] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) > Jan 29 22:24:11 Lindt2 kernel: [ 556.381734] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) > Jan 29 22:24:11 Lindt2 kernel: [ 556.381972] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. > Jan 29 22:24:11 Lindt2 kernel: [ 556.382253] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) > Jan 29 22:24:11 Lindt2 kernel: [ 556.382572] ACPI: Power Resource [PADA] (on) > Jan 29 22:24:11 Lindt2 kernel: [ 556.382594] Linux Plug and Play Support v0.97 (c) Adam Belay > Jan 29 22:24:11 Lindt2 kernel: [ 556.382626] pnp: PnP ACPI init > Jan 29 22:24:11 Lindt2 kernel: [ 556.382654] ACPI: bus type pnp registered > Jan 29 22:24:11 Lindt2 kernel: [ 556.478922] pnp: PnP ACPI: found 15 devices > Jan 29 22:24:11 Lindt2 kernel: [ 556.478931] ACPI: ACPI bus type pnp unregistered > Jan 29 22:24:11 Lindt2 kernel: [ 556.478944] PnPBIOS: Disabled by ACPI PNP > Jan 29 22:24:11 Lindt2 kernel: [ 556.481026] PCI: Using ACPI for IRQ routing > Jan 29 22:24:11 Lindt2 kernel: [ 556.481036] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > Jan 29 22:24:11 Lindt2 kernel: [ 556.484082] NET: Registered protocol family 8 > Jan 29 22:24:11 Lindt2 kernel: [ 556.484090] NET: Registered protocol family 20 > Jan 29 22:24:11 Lindt2 kernel: [ 556.484283] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484293] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484303] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484312] pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484332] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484354] pnp: 00:02: ioport range 0x800-0x805 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484363] pnp: 00:02: ioport range 0x808-0x80f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484381] pnp: 00:03: ioport range 0x806-0x807 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484390] pnp: 00:03: ioport range 0x850-0x853 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484399] pnp: 00:03: ioport range 0x856-0x85f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484407] pnp: 00:03: ioport range 0x810-0x83f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484416] pnp: 00:03: ioport range 0x840-0x84f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484424] pnp: 00:03: ioport range 0x600-0x67f has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484433] pnp: 00:03: ioport range 0x680-0x6ff has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484451] pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484460] pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484469] pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484478] pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484486] pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484496] pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484505] pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484513] pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484523] pnp: 00:04: iomem range 0xed000000-0xedffffff has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.484548] pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved > Jan 29 22:24:11 Lindt2 kernel: [ 556.487412] Time: tsc clocksource has been installed. > Jan 29 22:24:11 Lindt2 kernel: [ 556.515434] PCI: Bridge: 0000:00:01.0 > Jan 29 22:24:11 Lindt2 kernel: [ 556.515441] IO window: e000-efff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515451] MEM window: fd000000-feffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515459] PREFETCH window: f8000000-fbffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515469] PCI: Bus 2, cardbus bridge: 0000:00:03.0 > Jan 29 22:24:11 Lindt2 kernel: [ 556.515476] IO window: 00001000-000010ff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515485] IO window: 00001400-000014ff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515494] PREFETCH window: 20000000-23ffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515502] MEM window: 24000000-27ffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515511] PCI: Bus 6, cardbus bridge: 0000:00:03.1 > Jan 29 22:24:11 Lindt2 kernel: [ 556.515517] IO window: 00001800-000018ff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515525] IO window: 00001c00-00001cff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515534] PREFETCH window: 28000000-2bffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515542] MEM window: 2c000000-2fffffff > Jan 29 22:24:11 Lindt2 kernel: [ 556.515576] PCI: Enabling device 0000:00:03.0 (0000 -> 0003) > Jan 29 22:24:11 Lindt2 kernel: [ 556.516060] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 556.516078] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 556.516105] PCI: Enabling device 0000:00:03.1 (0000 -> 0003) > Jan 29 22:24:11 Lindt2 kernel: [ 556.516115] ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 556.516156] NET: Registered protocol family 2 > Jan 29 22:24:11 Lindt2 kernel: [ 556.555517] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 556.555649] TCP established hash table entries: 16384 (order: 5, 196608 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 556.556242] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 556.556878] TCP: Hash tables configured (established 16384 bind 16384) > Jan 29 22:24:11 Lindt2 kernel: [ 556.556888] TCP reno registered > Jan 29 22:24:11 Lindt2 kernel: [ 556.567829] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 > Jan 29 22:24:11 Lindt2 kernel: [ 557.394011] it is > Jan 29 22:24:11 Lindt2 kernel: [ 558.393925] Freeing initrd memory: 7336k freed > Jan 29 22:24:11 Lindt2 kernel: [ 558.394885] audit: initializing netlink socket (disabled) > Jan 29 22:24:11 Lindt2 kernel: [ 558.394921] audit(1201663151.812:1): initialized > Jan 29 22:24:11 Lindt2 kernel: [ 558.401473] VFS: Disk quotas dquot_6.5.1 > Jan 29 22:24:11 Lindt2 kernel: [ 558.401684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Jan 29 22:24:11 Lindt2 kernel: [ 558.401987] io scheduler noop registered > Jan 29 22:24:11 Lindt2 kernel: [ 558.401996] io scheduler anticipatory registered > Jan 29 22:24:11 Lindt2 kernel: [ 558.402002] io scheduler deadline registered > Jan 29 22:24:11 Lindt2 kernel: [ 558.402070] io scheduler cfq registered (default) > Jan 29 22:24:11 Lindt2 kernel: [ 558.402098] Limiting direct PCI/PCI transfers. > Jan 29 22:24:11 Lindt2 kernel: [ 558.402559] isapnp: Scanning for PnP cards... > Jan 29 22:24:11 Lindt2 kernel: [ 558.755433] isapnp: No Plug & Play device found > Jan 29 22:24:11 Lindt2 kernel: [ 558.835126] Real Time Clock Driver v1.12ac > Jan 29 22:24:11 Lindt2 kernel: [ 558.835364] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > Jan 29 22:24:11 Lindt2 kernel: [ 558.835524] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Jan 29 22:24:11 Lindt2 kernel: [ 558.837409] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Jan 29 22:24:11 Lindt2 kernel: [ 558.839512] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize > Jan 29 22:24:11 Lindt2 kernel: [ 558.840128] input: Macintosh mouse button emulation as /class/input/input0 > Jan 29 22:24:11 Lindt2 kernel: [ 558.840359] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > Jan 29 22:24:11 Lindt2 kernel: [ 558.850556] serio: i8042 KBD port at 0x60,0x64 irq 1 > Jan 29 22:24:11 Lindt2 kernel: [ 558.850573] serio: i8042 AUX port at 0x60,0x64 irq 12 > Jan 29 22:24:11 Lindt2 kernel: [ 558.851071] mice: PS/2 mouse device common for all mice > Jan 29 22:24:11 Lindt2 kernel: [ 558.851384] EISA: Probing bus 0 at eisa.0 > Jan 29 22:24:11 Lindt2 kernel: [ 558.851404] Cannot allocate resource for EISA slot 1 > Jan 29 22:24:11 Lindt2 kernel: [ 558.851438] EISA: Detected 0 cards. > Jan 29 22:24:11 Lindt2 kernel: [ 558.851695] TCP cubic registered > Jan 29 22:24:11 Lindt2 kernel: [ 558.851737] NET: Registered protocol family 1 > Jan 29 22:24:11 Lindt2 kernel: [ 558.851809] Using IPI No-Shortcut mode > Jan 29 22:24:11 Lindt2 kernel: [ 558.852224] Magic number: 8:808:311 > Jan 29 22:24:11 Lindt2 kernel: [ 558.852272] hash matches device ttyxe > Jan 29 22:24:11 Lindt2 kernel: [ 558.853730] Freeing unused kernel memory: 364k freed > Jan 29 22:24:11 Lindt2 kernel: [ 558.882572] input: AT Translated Set 2 keyboard as /class/input/input1 > Jan 29 22:24:11 Lindt2 kernel: [ 560.467719] AppArmor: AppArmor initialized<5>audit(1201663153.812:2): type=1505 info="AppArmor initialized" pid=1182 > Jan 29 22:24:11 Lindt2 kernel: [ 560.684836] fuse init (API version 7.8) > Jan 29 22:24:11 Lindt2 kernel: [ 560.699726] Failure registering capabilities with primary security module. > Jan 29 22:24:11 Lindt2 kernel: [ 560.823853] ACPI: CPU0 (power states: C1[C1] C2[C2]) > Jan 29 22:24:11 Lindt2 kernel: [ 560.852973] ACPI: Thermal Zone [THM] (52 C) > Jan 29 22:24:11 Lindt2 kernel: [ 572.613669] SCSI subsystem initialized > Jan 29 22:24:11 Lindt2 kernel: [ 572.648407] scsi0 : ata_piix > Jan 29 22:24:11 Lindt2 kernel: [ 572.648527] scsi1 : ata_piix > Jan 29 22:24:11 Lindt2 kernel: [ 572.650889] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00010860 irq 14 > Jan 29 22:24:11 Lindt2 kernel: [ 572.650901] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00010868 irq 15 > Jan 29 22:24:11 Lindt2 kernel: [ 572.676555] usbcore: registered new interface driver usbfs > Jan 29 22:24:11 Lindt2 kernel: [ 572.676633] usbcore: registered new interface driver hub > Jan 29 22:24:11 Lindt2 kernel: [ 572.676696] usbcore: registered new device driver usb > Jan 29 22:24:11 Lindt2 kernel: [ 572.680729] USB Universal Host Controller Interface driver v3.0 > Jan 29 22:24:11 Lindt2 kernel: [ 572.813465] ata1.00: ATA-5: IBM-DJSA-210, JS2OAB8A, max UDMA/66 > Jan 29 22:24:11 Lindt2 kernel: [ 572.813478] ata1.00: 19640880 sectors, multi 8: LBA > Jan 29 22:24:11 Lindt2 kernel: [ 572.829439] ata1.00: configured for UDMA/33 > Jan 29 22:24:11 Lindt2 kernel: [ 573.149083] ata2.00: ATAPI: TEAC CD-ROM CD-224E, 3.7C, max UDMA/33 > Jan 29 22:24:11 Lindt2 kernel: [ 573.321090] ata2.00: configured for UDMA/33 > Jan 29 22:24:11 Lindt2 kernel: [ 573.328841] scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-210 JS2O PQ: 0 ANSI: 5 > Jan 29 22:24:11 Lindt2 kernel: [ 573.329958] scsi 1:0:0:0: CD-ROM TEAC CD-224E 3.7C PQ: 0 ANSI: 5 > Jan 29 22:24:11 Lindt2 kernel: [ 573.339391] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 573.339424] uhci_hcd 0000:00:07.2: UHCI Host Controller > Jan 29 22:24:11 Lindt2 kernel: [ 573.339706] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 > Jan 29 22:24:11 Lindt2 kernel: [ 573.339751] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0 > Jan 29 22:24:11 Lindt2 kernel: [ 573.340102] usb usb1: configuration #1 chosen from 1 choice > Jan 29 22:24:11 Lindt2 kernel: [ 573.340180] hub 1-0:1.0: USB hub found > Jan 29 22:24:11 Lindt2 kernel: [ 573.340204] hub 1-0:1.0: 2 ports detected > Jan 29 22:24:11 Lindt2 kernel: [ 573.439368] Floppy drive(s): fd0 is 1.44M > Jan 29 22:24:11 Lindt2 kernel: [ 573.498991] FDC 0 is a post-1991 82077 > Jan 29 22:24:11 Lindt2 kernel: [ 573.752675] sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB) > Jan 29 22:24:11 Lindt2 kernel: [ 573.756608] sd 0:0:0:0: [sda] Write Protect is off > Jan 29 22:24:11 Lindt2 kernel: [ 573.764604] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Jan 29 22:24:11 Lindt2 kernel: [ 573.772602] sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB) > Jan 29 22:24:11 Lindt2 kernel: [ 573.776597] sd 0:0:0:0: [sda] Write Protect is off > Jan 29 22:24:11 Lindt2 kernel: [ 573.784595] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Jan 29 22:24:11 Lindt2 kernel: [ 573.784610] sda: sda1 sda2 < sda5 > > Jan 29 22:24:11 Lindt2 kernel: [ 574.182210] sd 0:0:0:0: [sda] Attached SCSI disk > Jan 29 22:24:11 Lindt2 kernel: [ 574.195461] sd 0:0:0:0: Attached scsi generic sg0 type 0 > Jan 29 22:24:11 Lindt2 kernel: [ 574.195518] scsi 1:0:0:0: Attached scsi generic sg1 type 5 > Jan 29 22:24:11 Lindt2 kernel: [ 574.219225] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray > Jan 29 22:24:11 Lindt2 kernel: [ 574.219240] Uniform CD-ROM driver Revision: 3.20 > Jan 29 22:24:11 Lindt2 kernel: [ 576.269171] Attempting manual resume > Jan 29 22:24:11 Lindt2 kernel: [ 576.915521] kjournald starting. Commit interval 5 seconds > Jan 29 22:24:11 Lindt2 kernel: [ 576.915557] EXT3-fs: mounted filesystem with ordered data mode. > Jan 29 22:24:11 Lindt2 kernel: [ 676.537513] Linux agpgart interface v0.102 (c) Dave Jones > Jan 29 22:24:11 Lindt2 kernel: [ 676.555091] agpgart: Detected an Intel 440BX Chipset. > Jan 29 22:24:11 Lindt2 kernel: [ 676.560132] agpgart: AGP aperture is 64M @ 0xf4000000 > Jan 29 22:24:11 Lindt2 kernel: [ 676.585968] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > Jan 29 22:24:11 Lindt2 kernel: [ 676.598036] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > Jan 29 22:24:11 Lindt2 kernel: [ 676.764242] Yenta: CardBus bridge found at 0000:00:03.0 [1028:00b0] > Jan 29 22:24:11 Lindt2 kernel: [ 676.764270] Yenta: Using CSCINT to route CSC interrupts to PCI > Jan 29 22:24:11 Lindt2 kernel: [ 676.764277] Yenta: Routing CardBus interrupts to PCI > Jan 29 22:24:11 Lindt2 kernel: [ 676.764286] Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x64 > Jan 29 22:24:11 Lindt2 kernel: [ 677.004651] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 > Jan 29 22:24:11 Lindt2 kernel: [ 677.004662] Socket status: 30000020 > Jan 29 22:24:11 Lindt2 kernel: [ 677.005036] Yenta: CardBus bridge found at 0000:00:03.1 [1028:00b0] > Jan 29 22:24:11 Lindt2 kernel: [ 677.005059] Yenta: Using CSCINT to route CSC interrupts to PCI > Jan 29 22:24:11 Lindt2 kernel: [ 677.005066] Yenta: Routing CardBus interrupts to PCI > Jan 29 22:24:11 Lindt2 kernel: [ 677.005076] Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x64 > Jan 29 22:24:11 Lindt2 kernel: [ 677.236558] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 > Jan 29 22:24:11 Lindt2 kernel: [ 677.236569] Socket status: 30000006 > Jan 29 22:24:11 Lindt2 kernel: [ 677.639850] pccard: CardBus card inserted into slot 0 > Jan 29 22:24:11 Lindt2 kernel: [ 678.494143] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device > Jan 29 22:24:11 Lindt2 kernel: [ 679.725199] martian loaded - 20061202 > Jan 29 22:24:11 Lindt2 kernel: [ 679.725360] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 679.725412] "martian_dev": added device 11c1:448 BaseAddress = 0xd400, CommAddres = 0xdcd8, irq = 11 > Jan 29 22:24:11 Lindt2 kernel: [ 679.725451] PCI: Enabling device 0000:02:00.0 (0000 -> 0003) > Jan 29 22:24:11 Lindt2 kernel: [ 679.725463] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 679.725487] ACPI: PCI interrupt for device 0000:02:00.0 disabled > Jan 29 22:24:11 Lindt2 kernel: [ 680.215764] "martian_dev": serving irqs in module > Jan 29 22:24:11 Lindt2 kernel: [ 680.215780] "martian_dev": martian_modem is attached. > Jan 29 22:24:11 Lindt2 kernel: [ 680.335149] input: PC Speaker as /class/input/input2 > Jan 29 22:24:11 Lindt2 kernel: [ 680.944036] Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0 > Jan 29 22:24:11 Lindt2 kernel: [ 680.944054] serio: Synaptics pass-through port at isa0060/serio1/input0 > Jan 29 22:24:11 Lindt2 kernel: [ 680.997344] input: SynPS/2 Synaptics TouchPad as /class/input/input3 > Jan 29 22:24:11 Lindt2 kernel: [ 681.274935] parport_pc 00:0e: reported by Plug and Play ACPI > Jan 29 22:24:11 Lindt2 kernel: [ 681.275011] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] > Jan 29 22:24:11 Lindt2 kernel: [ 682.173452] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Jan 29 22:24:11 Lindt2 kernel: [ 682.173931] eth0: Xircom cardbus revision 3 at irq 11 > Jan 29 22:24:11 Lindt2 kernel: [ 682.831466] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 > Jan 29 22:24:11 Lindt2 kernel: [ 682.832872] cs: IO port probe 0x3e0-0x4ff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.833244] cs: IO port probe 0x820-0x8ff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.833497] cs: IO port probe 0xc00-0xcf7: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.834397] cs: IO port probe 0xa00-0xaff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.849523] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 > Jan 29 22:24:11 Lindt2 kernel: [ 682.850400] cs: IO port probe 0x3e0-0x4ff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.850782] cs: IO port probe 0x820-0x8ff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.851036] cs: IO port probe 0xc00-0xcf7: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 682.851584] cs: IO port probe 0xa00-0xaff: clean. > Jan 29 22:24:11 Lindt2 kernel: [ 683.173454] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 > Jan 29 22:24:11 Lindt2 kernel: [ 683.173475] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 > Jan 29 22:24:11 Lindt2 kernel: [ 687.332614] IBM TrackPoint firmware: 0x0b, buttons: 2/3 > Jan 29 22:24:11 Lindt2 kernel: [ 687.601721] input: TPPS/2 IBM TrackPoint as /class/input/input4 > Jan 29 22:24:11 Lindt2 kernel: [ 246.456000] Marking TSC unstable due to: possible TSC halt in C2. > Jan 29 22:24:11 Lindt2 kernel: [ 246.460000] Time: acpi_pm clocksource has been installed. > Jan 29 22:24:11 Lindt2 kernel: [ 246.836000] Clocksource tsc unstable (delta = -3325516124 ns) > Jan 29 22:24:11 Lindt2 kernel: [ 291.120000] lp0: using parport0 (interrupt-driven). > Jan 29 22:24:11 Lindt2 kernel: [ 291.228000] Adding 465844k swap on /dev/sda5. Priority:-1 extents:1 across:465844k > Jan 29 22:24:11 Lindt2 kernel: [ 291.684000] EXT3 FS on sda1, internal journal > Jan 29 22:24:11 Lindt2 kernel: [ 294.420000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > Jan 29 22:24:11 Lindt2 kernel: [ 294.952000] ACPI: Battery Slot [BAT0] (battery present) > Jan 29 22:24:11 Lindt2 kernel: [ 294.952000] ACPI: Battery Slot [BAT1] (battery absent) > Jan 29 22:24:11 Lindt2 kernel: [ 295.052000] input: Lid Switch as /class/input/input5 > Jan 29 22:24:11 Lindt2 kernel: [ 295.052000] ACPI: Lid Switch [LID] > Jan 29 22:24:11 Lindt2 kernel: [ 295.076000] input: Power Button (CM) as /class/input/input6 > Jan 29 22:24:11 Lindt2 kernel: [ 295.076000] ACPI: Power Button (CM) [PBTN] > Jan 29 22:24:11 Lindt2 kernel: [ 295.088000] input: Sleep Button (CM) as /class/input/input7 > Jan 29 22:24:11 Lindt2 kernel: [ 295.088000] ACPI: Sleep Button (CM) [SBTN] > Jan 29 22:24:11 Lindt2 kernel: [ 295.420000] ACPI: ACPI Dock Station Driver > Jan 29 22:24:11 Lindt2 kernel: [ 295.672000] ACPI: AC Adapter [AC] (on-line) > Jan 29 22:24:12 Lindt2 kernel: [ 300.192000] ppdev: user-space parallel port driver > Jan 29 22:24:13 Lindt2 kernel: [ 300.812000] xircom cardbus adaptor found, registering as eth0, using irq 11 > Jan 29 22:24:13 Lindt2 kernel: [ 300.836000] audit(1201663452.920:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4809 profile="/usr/sbin/cupsd" > Jan 29 22:24:13 Lindt2 kernel: [ 301.028000] Dell Inspiron machine detected. Enabling interrupts during APM calls. > Jan 29 22:24:13 Lindt2 kernel: [ 301.028000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) > Jan 29 22:24:13 Lindt2 kernel: [ 301.028000] apm: overridden by ACPI. > Jan 29 22:24:13 Lindt2 kernel: [ 301.312000] ondemand governor failed to load due to too long transition latency > Jan 29 22:24:14 Lindt2 kernel: [ 301.544000] Failure registering capabilities with primary security module. > Jan 29 22:24:14 Lindt2 dhcdbd: Started up. > Jan 29 22:24:14 Lindt2 kernel: [ 301.924000] Bluetooth: Core ver 2.11 > Jan 29 22:24:14 Lindt2 kernel: [ 301.924000] NET: Registered protocol family 31 > Jan 29 22:24:14 Lindt2 kernel: [ 301.924000] Bluetooth: HCI device and connection manager initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.924000] Bluetooth: HCI socket layer initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.972000] Bluetooth: L2CAP ver 2.8 > Jan 29 22:24:14 Lindt2 kernel: [ 301.972000] Bluetooth: L2CAP socket layer initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.996000] Bluetooth: RFCOMM socket layer initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.996000] Bluetooth: RFCOMM TTY layer initialized > Jan 29 22:24:14 Lindt2 kernel: [ 301.996000] Bluetooth: RFCOMM ver 1.8 > Jan 29 22:25:01 Lindt2 kernel: [ 348.888000] ondemand governor failed to load due to too long transition latency > Jan 29 22:25:50 Lindt2 kernel: [ 397.724000] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. > Jan 29 22:26:33 Lindt2 kernel: [ 441.348000] "martian_dev": martian_modem is detached > Jan 29 22:34:30 Lindt2 kernel: [ 917.996000] usb 1-1: new full speed USB device using uhci_hcd and address 2 > Jan 29 22:34:30 Lindt2 kernel: [ 918.168000] usb 1-1: configuration #1 chosen from 1 choice > Jan 29 22:34:31 Lindt2 kernel: [ 918.480000] usbcore: registered new interface driver libusual > Jan 29 22:34:31 Lindt2 kernel: [ 918.724000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > Jan 29 22:34:31 Lindt2 kernel: [ 918.724000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > Jan 29 22:34:31 Lindt2 kernel: [ 918.768000] Initializing USB Mass Storage driver... > Jan 29 22:34:31 Lindt2 kernel: [ 918.772000] scsi2 : SCSI emulation for USB Mass Storage devices > Jan 29 22:34:31 Lindt2 kernel: [ 918.772000] usbcore: registered new interface driver usb-storage > Jan 29 22:34:31 Lindt2 kernel: [ 918.772000] USB Mass Storage support registered. > Jan 29 22:34:36 Lindt2 kernel: [ 923.776000] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Titanium 2000 PQ: 0 ANSI: 0 CCS > Jan 29 22:34:36 Lindt2 kernel: [ 923.788000] sd 2:0:0:0: [sdb] 1014784 512-byte hardware sectors (520 MB) > Jan 29 22:34:36 Lindt2 kernel: [ 923.788000] sd 2:0:0:0: [sdb] Write Protect is off > Jan 29 22:34:36 Lindt2 kernel: [ 923.800000] sd 2:0:0:0: [sdb] 1014784 512-byte hardware sectors (520 MB) > Jan 29 22:34:36 Lindt2 kernel: [ 923.804000] sd 2:0:0:0: [sdb] Write Protect is off > Jan 29 22:34:36 Lindt2 kernel: [ 923.804000] sdb: sdb1 > Jan 29 22:34:36 Lindt2 kernel: [ 923.856000] sd 2:0:0:0: [sdb] Attached SCSI removable disk > Jan 29 22:34:36 Lindt2 kernel: [ 923.856000] sd 2:0:0:0: Attached scsi generic sg2 type 0 > Jan 29 22:34:43 Lindt2 kernel: [ 931.468000] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. > >
