Wizards --
Extracts from ModemData.txt below at end. My machine is a Dell Inspiron
4000, with a Lucent Mars/Apollo DSP chipset. I've downloaded the latest
martian-full driver pkg, along with libc6-dev and linux-libc-dev for my
Ubuntu 7.10 (Gutsy Gibbon) OS. Following instructions in AgereDSP.txt,
make-all and make-install completed with only warnings.
However, as the following console transcript shows, something's amiss:
o The martian version loaded is apparently 20061202, not 20071011
of the package name
o modprobe seems to indicate that the system can't find the modem
o wvdialconf can't find the modem, either
What am I missing, and how to fix it?
-- Roy
-------------------------- Console excerpt --------------------------
crt@Lindt2: modprobe martian_dev
[sudo] password for crt:
crt@Lindt2: sudo martian_modem --country=us
[sudo] password for crt:
martian: info: Your port is /dev/ttySM0
crt@Lindt2: ls -l /dev/ttySM0 /dev/pts/*
crw--w---- 1 crt tty 136, 0 2008-01-23 19:18 /dev/pts/0
crw--w---- 1 crt tty 136, 1 2008-01-23 19:25 /dev/pts/1
crw--w---- 1 crt tty 136, 2 2008-01-23 16:44 /dev/pts/2
crw--w---- 1 root tty 136, 3 2008-01-23 19:18 /dev/pts/3
lrwxrwxrwx 1 root root 10 2008-01-23 19:18 /dev/ttySM0 -> /dev/pts/3
crt@Lindt2: dmesg | grep martian
[ 333.607475] martian loaded - 20061202
[ 333.607692] "martian_dev": added device 11c1:448
BaseAddress = 0xd400, CommAddres = 0xdcd8, irq = 11
[ 333.607795] "martian_dev": failed to gather device info
[ 698.644000] "martian_dev": failed to gather device info
[ 2210.416000] "martian_dev": serving irqs in module
[ 2210.416000] "martian_dev": martian_modem is attached.
crt@Lindt2: wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
WvModem<*1>: Cannot set information for serial port.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
ttySM0<Info>: Permission denied
Modem Port Scan<*1>: SM0
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
----------------------------------------------------------------
---------------------- System information ------------------------
CPU=i686, Linux version 2.6.22-14-generic (buildd@palmer)
(gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2))
#1 SMP Sun Oct 14 23:05:12 GMT 2007
scanModem update of: 2008_11_01
<SNIP>
For candidate modem in PCI bus: 00:10.0
Class 0780: 11c1:0448
Communication controller: Agere Systems WinModem 56k
Primary PCI_id 11c1:0448
Support type needed or chipset: Agere.DSP
----------------end Softmodem section --------------
The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal
processing) chipset. Support packages for 2.6.n kernels are at:
http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/,
with current update martian-full-20071011.tar.gz
<SNIP>
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
