Daniel
1) Of most importance, check if there is a file
/proc/asound/card0/codec97#0/mc97#1-1+reg
If so, send me the complete output of:
cat /proc/asound/card0/codec97#0/mc97#1-1+regs
2) RE: $ sudo ./slmodemd -a -c BRAZIL hw:0
hw:0 is merely the audio compondent of the card. It will not support COMM.
$ sudo ./slmodemd -a -c BRAZIL hw:0,1
would use the modem Subsystem if present
3) version 2.9.9e-pre1 is NOT competent for COMM with current kernels.
>From http://phep2.technion.ac.il/linmodems/packages/smartlink/
get the SLMODEMD.gcc4.1.tar.gz and use the slmodemd therein of version 2.9.11
I'll do a bugfix for ALI5451 interrogation tonight
MarvS
On Jan 7, 2008 8:55 AM, Daniel Victoria <daniel.victoria@xxxxxxxxx> wrote:
> Hi Marv,
>
> I did not delete anything from the ModemData.txt output.
>
> The output from the command you requested is attached. I'm also
> attaching the lspci and lspci -nv outputs.
>
> The good news is that I found a post that directed me to download
> slmodemd-2.9.9e-pre1-alsa.tar.gz and running the daemon, apparently my
> modem was detected!! I could not do a complete test because I don't
> have a land line now, but will test it latter today. The output of the
> slmodemd command is:
>
> daniel@xadrez:~/p2120/SLMODEMD$ sudo ./slmodemd -a -c BRAZIL hw:0
> SmartLink Soft Modem: version 2.9.9e-pre1 Sep 24 2005 14:47:19
> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
> modem `hw:0' created. TTY is `/dev/pts/1'
> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>
> Thanks
> Daniel
>
>
> On Jan 7, 2008 11:43 AM, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> > Daniel,
> >
> > Your ModemData.txt is missing large blocks of expected info, Do
> > $ bash -x ./scanModem 2>&1 | tee DV.txt
> > and send me the DV.txt, so I can do a bug fix if necessary.
> >
> > If you deliberately deleted some unpleasant info from the ModemData.txt
> > PLEASE resend the complete file. At a minimum, return the output of
> > $ lspci
> > $ lspci -nv
> >
> > The Si3036 are a base chip, which are customized further.
> > They can be finished to serve as Conexant modem chips
> > or as chips for several other modems supported by freeware.
> >
> > MarvS
> > scanModem maintainer
> >
> >
> > On Jan 7, 2008 8:00 AM, Daniel Victoria <daniel.victoria@xxxxxxxxx> wrote:
> > > Hi,
> > >
> > > I have a Fujitsu Lifebook and scanmodem tool tells me I have an ALI
> > > 5451 but does not output any instructions as to what to do to get it
> > > working. I'm attaching the scanModem output.
> > >
> > > Also, looking at /proc/asound/card0/codec97#0/mc97#1-1 it gives:
> > >
> > > daniel@xadrez:/proc/asound/card0/codec97#0$ more mc97#1-1
> > > 1-1/0: Silicon Laboratory Si3036,8 rev 7
> > >
> > > Extended modem ID: codec=1 LIN1
> > > Modem status : GPIO MREF ADC1 DAC1 PRE(ADC2) PRF(DAC2) PRG(HADC) PRH(HDAC)
> > > Line1 rate : 8000Hz
> > >
> > > Does that mean I have a ALI modem with SIL chipset? What do I do now?
> > >
> > > Thanks
> > > Daniel
> > >
> >
>
