Valter, Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with: $ tar zxf SLMODEMD.gcc4.1.tar.gz and read instructions therein. But briefly, the modem is setup with command: sudo slmodemd -c ITALY --alsa modem:1 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. MarvS On Nov 19, 2007 6:30 PM, Valter Lelli <valter@xxxxxxxxx> wrote: > Can you help me? > Thank's > > Valter Lelli > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.22-14-generic > With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. > YourCountry will enable Country specific guidance. Your contry's local Linux experts > can be found through: http://www.linux.org/groups/index.html > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 > scanModem update of: 20071109 > The modem symbolic link is /dev/modem -> ttySL0 > The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0 > > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > snd_atiixp_modem > snd_via82xx_modem > snd_intel8x0m > > > The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System, > also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host > a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver. > The ALSA diagnostics are written during bootup to /proc/asound/ folders. > > > Modem not detected though HDA card diagnostics, though not excluding > a possible Conexant modem chip impervious to ALSA diagnostics. > Proceeding through alternative possibilties. > > Summary card and chipset information is in: > /proc/asound/cards: > 0 [ICH6 ]: ICH4 - Intel ICH6 > Intel ICH6 with ALC250 at irq 16 > 1 [Modem ]: ICH-MODEM - Intel ICH6 Modem > Intel ICH6 Modem at irq 18 > > /proc/asound/pcm: > 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1 > 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1 > 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1 > 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1 > 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1 > 01-00: Intel ICH - Modem : Intel ICH6 Modem - Modem : playback 1 : capture 1 > > A copy of /proc/asound had been copied to Modem/ALSAroot.tgz > USB modem not detected by lsusb > > For candidate card, firmware information and bootup diagnostics are: > > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1e.3 8086:266d 1179:0001 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW > > Modem interrupt assignment and sharing: > 18: 0 IO-APIC-fasteoi Intel ICH6 Modem > --- Bootup diagnostics for card in PCI slot 00:1e.3 ---- > [ 11.040480] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18 > [ 11.040489] ACPI: PCI interrupt for device 0000:00:1e.3 disabled > [ 395.552000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18 > [ 395.552000] PCI: Setting latency timer of device 0000:00:1e.3 to 64 > [ 6687.236000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled > [ 6688.352000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18 > [ 6688.352000] PCI: Setting latency timer of device 0000:00:1e.3 to 64 > [33733.776000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled > [33734.892000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18 > [33734.892000] PCI: Setting latency timer of device 0000:00:1e.3 to 64 > [35586.796000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled > [35587.916000] PM: Writing back config space on device 0000:00:1e.3 at offset f (was 200, writing 20b) > [35587.916000] PM: Writing back config space on device 0000:00:1e.3 at offset 5 (was 1501, writing 2001) > [35587.916000] PM: Writing back config space on device 0000:00:1e.3 at offset 4 (was 1401, writing 2401) > [35587.916000] PM: Writing back config space on device 0000:00:1e.3 at offset 1 (was 2900005, writing 2900001) > [35587.916000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18 > [35587.916000] PCI: Setting latency timer of device 0000:00:1e.3 to 64 > > The PCI slot 00:1e.3 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished modem firmware and bootup diagnostics section. === > === Next deducing cogent software === > > > There is candidate modem software. > > For candidate modem in PCI bus: 00:1e.3 > Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW > Primary PCI_id 8086:266d > Subsystem PCI_id 1179:0001 > Softmodem codec or chipset from diagnostics: SIL2f > from Archives: SIL27, an LSI/AgereSystems type. > Diagnostics and the Archive data DISAGREE > > Lacking a dsp (digital signal processing) chip, the modem is a software > intensive or "softmodem" type. Its primary controller manages the traffic > with the CPU. But the software needed is specified in the Subsystem. > ----------------------------------------- > Support type needed or chipset: slmodemd > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m > provides Low Level support enabling contact with the modem hardware. > For all BUT Conexant chip soft modems (using hsfmodem software) > complementary High Level support is through a Smartlink utility: slmodemd > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with: > $ tar zxf SLMODEMD.gcc4.1.tar.gz > and read instructions therein. But briefly, the modem is setup with command: > sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 > reporting dynamic creation of ports: > /dev/ttySL0 --> /dev/pts/N , with N some number > Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. > > Already loaded into the kernel is snd-intel8x0m and audio drivers it depends on, > displayed by: lsmod | grep snd_intel8x0m > Module Size Used by > ------------------------------------- > snd_intel8x0m 18572 5 > snd_ac97_codec 100644 4 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0 > snd_pcm 80388 8 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss > snd 54660 23 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > snd_page_alloc 11400 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm > > > The diagnostic outputs for this softmodem section have their raw information in > folders and text files under /proc/asound/ which you can browse. The information > is from files: > /proc/asound/pcm > ------------------------------- > 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1 > 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1 > 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1 > 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1 > 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1 > 01-00: Intel ICH - Modem : Intel ICH6 Modem - Modem : playback 1 : capture 1 > > /proc/asound/modules > ------------------------------- > 0 snd_intel8x0 > 1 snd_intel8x0m > /proc/asound/card1/codec97#0/mc97#1-1+regs > ------------------------------- > 0:7c = 5349 and 0:7e = 4c2f > which were translated from hexadecimal code into: SIL2f > > /proc/asound/card1/codec97#0/mc97#1-1 > ------------------------------- > Extended modem ID: codec=1 LIN1 > > and from the command: > aplay -l | grep -i modem > scheda 1: Modem [Intel ICH6 Modem], dispositivo 0: Intel ICH - Modem [Intel ICH6 Modem - Modem] > > ----------------end Softmodem section -------------- > > Writing Intel.txt > Writing Smartlink.txt > ============ end Smartlink section ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.1.3 > and the compiler used in kernel assembly: 4.1.3 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.1 > linuc_headers base folder /lib/modules/2.6.22-14-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . > For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default. > > > > If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed pacakage > For Debian/Ubuntu related distributions, run the following command to display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 eth0:avah > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for the experts > should trouble shooting be necessary. > ========================================================== > > # start/stop the daemon when the USB modem is connected > KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2007-11-17 08:43 /dev/modem -> ttySL0 > slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 2007-11-17 08:43 /dev/ttySL0 -> /dev/pts/0 > Within /etc/udev/ files: > /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected > /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected > /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > Within /etc/modprobe.conf files: > /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > >
