Re: Rudy, Indonesia - Suse 10.2 kernel 2.6.18.2-34-default on presario v3430

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rudy,
I assume that you have downloaded hsfmodem-7.68.00.04full_k2.6.18.2_34_default-1suse.i586.rpm
from http://www.linuxant.com/drivers
While doing so, have you noticed that this driver is for the i386
platform, of which i586 is a member, but not the 64 bits x86_64 in your computer.
So, have you performed the attempt which failed in 32-bits mode?
If you did, were you root when trying to use the modem?
Jacques

Rudy wrote:
Hi,

I am having problem getting the internal modem to work on Compaq Presario V3430.

I have downloaded scanmodem and run it. Attached is the ModemData.txt From ModemData.txt (and from reading the archives list), I understand my modem is Conexant HSF modem. I downloaded the driver from linuxant
hsfmodem-7.68.00.04full_k2.6.18.2_34_default-1suse.i586.rpm

I installed the driver using YAST. After installation there is
/dev/ttySHSF0
/dev/ttySHSF1
and so on

with softlink /dev/modem --> /dev/ttySHSF0

but I cannot make it work
Running #wvdialconf /etc/wvdial.conf shows

ttySHSF0<Info>: Device or resource busy

One thing I noted: after installing hsf driver, the notebook audio doesnot work. The audio is normal again when I uninstall the hsf driver. I run the presario with OpenSuse 10.2 x86_64 (64 bit).

Can someone help me.... Thank you

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux