Hi Jacques, Thanks for the reply, I did notice, though I was not sure, that might be the driver i586 doesnot work on x86_64. Sorry, as I'm new to Linux, is there a way or how can I running the driver in 32 bit mode on x86_64 ? Rudy On Thursday 15 November 2007 21:46, Jacques Goldberg wrote: > Rudy, > I assume that you have downloaded > hsfmodem-7.68.00.04full_k2.6.18.2_34_default-1suse.i586.rpm > from http://www.linuxant.com/drivers > While doing so, have you noticed that this driver is for the i386 > platform, of which i586 is a member, but not the 64 bits x86_64 in your > computer. > So, have you performed the attempt which failed in 32-bits mode? > If you did, were you root when trying to use the modem? > Jacques > > Rudy wrote: > > Hi, > > > > I am having problem getting the internal modem to work on Compaq Presario > > V3430. > > > > I have downloaded scanmodem and run it. Attached is the ModemData.txt > > > > From ModemData.txt (and from reading the archives list), I understand my > > modem is Conexant HSF modem. I downloaded the driver from linuxant > > > > hsfmodem-7.68.00.04full_k2.6.18.2_34_default-1suse.i586.rpm > > > > I installed the driver using YAST. After installation there is > > > > /dev/ttySHSF0 > > /dev/ttySHSF1 > > and so on > > > > with softlink /dev/modem --> /dev/ttySHSF0 > > > > but I cannot make it work > > > > Running #wvdialconf /etc/wvdial.conf shows > > > > ttySHSF0<Info>: Device or resource busy > > > > One thing I noted: after installing hsf driver, the notebook audio > > doesnot work. The audio is normal again when I uninstall the hsf driver. > > I run the presario with OpenSuse 10.2 x86_64 (64 bit). > > > > Can someone help me.... > > > > Thank you
