I've added Carrier Check = no since it was written in the readme of the package I compiled. As for X3 I can't try until next holidays, since my sister's computer is at home (with its owner...). I'll write you as soon as I can check your sggestions again! Thanks Francesco. ---------- Initial Header ----------- >From : "Jacques Goldberg" Jacques.Goldberg@xxxxxxx To : "astabada" Astabada@xxxxxxxxx Cc : "Linmodems" discuss@xxxxxxxxxxxxx Date : Mon, 08 Oct 2007 10:07:01 +0200 Subject : Re: request for soft support! > Astabada, > > It may be as simple as having forgotten to add a line > Carrier Check = no in /etc/wvdial.conf > > I never use anything else than wvdial so I cannot guarantee that this > line does the same as adding X3 in the modem initialization string in > the kppp configuration menu. > > Jacques > > astabada wrote: > > Thank you for your fast answer... I tried all the remaining of > > saturday night (until 4 am) to make the modem work - and it did. > > Unfortunately it says "no dial tone", with both kppp and wvdial! > > > > Since I'm in Bologna now, I can't use my sister pc to tell if there > > is something wrong with the configuration of the isp or with the > > drivers and I've to wait Christmas to see my home again... Meanwhile > > my family will continue using windows to connect to the net, and this > > shame is my fault... > > > > Next time I'll make it work - I promise. Grazie! > > > > > > ---------- Initial Header ----------- > > > > From : "Jacques Goldberg" Jacques.Goldberg@xxxxxxx To : > > "astabada" Astabada@xxxxxxxxx Cc : Date : Sat, 06 Oct > > 2007 21:20:36 +0200 Subject : Re: request for soft support! > > > > > > > > > > > > > > > >> Here is the answer found in ModemData.txt: BEGIN 1057:3052 has a > >> Motorola chipset, poorly supported by Motorola itself However Zello > >> discovered that drivers written to support Smartlink modems do > >> support the 1057:3052 chipset!! It sufficed to add 1057:3052 to the > >> list of modem cards recognized by the Smartlink slamr driver. There > >> is a ungrab-winmodem driver used in conjunction with slamr, which > >> must have 1057:3052 similarly added. See messages from Zello: > >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html > >> > >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html > >> and Alvaro Aguirre about the ungrab-winmodem fix: > >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html > >> For general guidance on ungrab-winmodem + slamr usage, read the > >> Smartlink.txt > >> > >> The modem is supported by the Smartlink slamr driver plus the > >> slmodemd helper utility. Read the Smartlink.txt and > >> Modem/YourSystem.txt for follow through guidance. END > >> > >> Buono viaggio > >> > >> > >> astabada wrote: > >>> Hi, I used scanModem on my pc and the result is attached... > >>> > >>> If you cannot answer before tomorrow morning, I won't be able to > >>> test your commands, because I'm leaving at 12:00 (Italian time). > >>> Anyway I'll be home once again in Christmas time, so I'll test > >>> then your suggestions. > >>> > >>> Thanks, Francesco from Italy > >>> > >>> > >>> ------------------------------------------------------ Leggi > >>> GRATIS le tue mail con il telefonino i-modeTM di Wind > >>> http://i-mode.wind.it/ > >>> > > > > > > ------------------------------------------------------ Leggi GRATIS > > le tue mail con il telefonino i-modeTM di Wind http://i-mode.wind.it/ > > > ------------------------------------------------------ Leggi GRATIS le tue mail con il telefonino i-mode? di Wind http://i-mode.wind.it/
