MotorolaSM56, INDONESIA kernel 2.6.20-15-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I tried to use new version of scanModem nad this is the result.

I think there is no change for my case with Ubuntu Feisty, but I still
can not dial up to internet.

My step to install slmodemd is just as the following
		$ tar zxf SLMODEMD.gcc4.1.tar.gz

And copykan to directory /usr/sbin
$ sudo cp /tmp/slmodemd /usr/sbin/

Based on file 1st_Read.txt I continue with
$ modprobe snd-intel8x0m
$ slmodemd --alsa -c INDONESIA hw:0,6
		This slmodemd command creates the modem port and a
/dev/ttySL0 symbolic link to it: 
 /dev/ttySL0 --> /dev/pts/6

$ sudo gedit /etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/ttySL0
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 
; Stupid Mode = yes 
Modem Type = Analog 
Modem Phone = 92080989999 
New PPPD = yes 
ISDN = 0 
Username = telkomnet@instan 
Carrier Check = no 
Password = telkom 
Baud = 460800


$ sudo wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'.

Modem Port Scan<*1>: S0   S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttySL0<*1>: ATQ0 V1 E1 -- OK
ttySL0<*1>: ATQ0 V1 E1 Z -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem
ttySL0<*1>: Speed 4800: AT -- OK
ttySL0<*1>: Speed 9600: AT -- OK
ttySL0<*1>: Speed 19200: AT -- OK
ttySL0<*1>: Speed 38400: AT -- OK
ttySL0<*1>: Speed 57600: AT -- OK
ttySL0<*1>: Speed 115200: AT -- OK
ttySL0<*1>: Speed 230400: AT -- OK
ttySL0<*1>: Speed 460800: AT -- OK
ttySL0<*1>: Max speed is 460800; that should be safe.
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
 
Found a modem on /dev/ttySL0.
Modem configuration written to /etc/wvdial.conf.
ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
 
$ sudo wvdial
--> WvDial: Internet dialer version 1.56 Cannot get information for 
--> serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT92080989999
--> Waiting for carrier.
ATDT92080989999
NO CARRIER

Is there any miss step I taken?


------------------------------------------------------------------------
------------------------------------------------------------------------
--------------------------------------------------------------------
CPU=i686,  
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu
4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
 scanModem update of:  2007_Oct_07


 There are no blacklisted modem drivers in /etc/modprobe*  files 
USB modem not detected by lsusb


Several modems are supported by drivers with ALSA, the Advanced Linux
Sound Architecture software.
Copying ALSA diagnostics to Modem/ALSArobihun.tgz
ALSAversion = 1.0.13

Modem or candidate host audio card have firmware information and
diagnostics:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	1558:5405	Audio device: Intel
Corporation 82801G 

 Modem interrupt assignment and sharing: 
 21:       1303          0   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[   21.404000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
low) -> IRQ 21
[   21.404000] PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

  The High Defintion Audio card with PCI ID 8086:27d8 may host a soft
modem chip.
8086:27d8 is a High Definition Audio card, possibly hosting a soft
modem.
Bootup diagnostics lack ALSA data.

 The HDA modem codec file is: /proc/asound/card0/codec#1
-----------------------------------
Codec: Motorola Si3054
Address: 1
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700

 The audio card hosts a softmodem chip with Vendor ID:  0x10573055

 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
      Primary PCI_id  8086:27d8
    Subsystem PCI_id  1558:5405 
    Softmodem codec or Vendor from diagnostics: Motorola_Si3054, a
Motorola type.
                              from    Archives: 10573055_Motorola_Si3054
       Diagnostics and the Archive data DISAGREE                  

 This is a NEW softmodem case!  Please send the output ModemData.txt 
 to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
 If further assistance is not needed, please use email Subject:
     New Case Only
 -------------------------------------------
 Lacking a dsp (digital signal processing) chip, the modem is a software

 intensive or "softmodem" type. Its primary controller manages the
traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:
snd-hda-intel
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:
slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
 	$ tar zxf SLMODEMD.gcc4.1.tar.gz
 and read instructions therein. But briefly, the modem is setup with
command:
 	sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through
guidance.

 Already loaded into the kernel is snd-hda-intel and audio drivers it
depends on,
 displayed by:	lsmod | grep snd_hda_intel
Module                  Size  Used by
-------------------------------------
snd_hda_intel          21912  1 
snd_hda_codec         205440  1 snd_hda_intel
snd_pcm                79876  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd                    54020  12
snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_os
s,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc         10888  2 snd_hda_intel,snd_pcm


The diagnostic outputs for this softmodem section have their raw
information in
folders and text files under /proc/asound/ which you can browse. The
information
is from files:
	/proc/asound/pcm
-------------------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-02: ALC883 Analog : ALC883 Analog : capture 2
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2

	/proc/asound/modules
-------------------------------
 0 snd_hda_intel
	10573055
-------------------------------

-------------------------------
Current support status of HDA cards is:
  Vendor IDs  Chip maker     Support type 
  ----------  ----------    -------------
  0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
  0x14f12c06  Conexant      hsfmodem , not slmodemd compatible
  0x11c1040  AgereSystems  snd-hda-intel + slmodemd, support not
estabished
  All others currently supported
	/proc/asound/card0/codec#1
-------------------------------


and from the command:
	aplay -l | grep -i modem
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]

----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.20-15-generic/build

 However some compilations and executable functions may need additional
files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in
/usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for
Debian/Ubuntu,  linux-libc-dev). The also required headers of package
libc6 are commonly installed by default. 



If a driver compilation files with message including some lack of some
FileName.h (stdio.h for example. 
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be
found through http://packages.ubuntu.com

For Ubuntu Feisty, additional packages required were:
 libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not on the install
CD.
Such packages may have different names for other Linux distributions.
Try installing just the libc6-dev, then test the compile again.


Checking pppd properties:
	-rwsr-xr-x 1 root dip 269224 2007-04-05 10:41 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1
eth0:avah eth1:avah
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem~:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem~:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem~:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux