Re: L Middleton, New Zealand, Freespire skipjack-feisty (development version) ( kernel 2.6.20-16-lowlatency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Marv, L & J and others,

I am not familiar with Freespire but if indeed the Ubuntu Feisty Fawn
(7.04) package works with it, the right link to get the 536EP driver
is:

<https://help.ubuntu.com/community/DialupModemHowto/Intel536EP>

which points to the 536EP wiki. There you will find the link to the
post with the latest available drivers, which is:

<http://ubuntuforums.org/showthread.php?t=471503>

This package is mantained by Sepero, you can contact him with a post
in that thread.

Marv, please correct the link to the 536EP wiki with the first one I
am posting (it needed the final EP).

Regards,

Carlos.

On 22/09/2007, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> L & J
>
>  For Ubuntu Linux users with Intel 536 and 537 chipsets the are driver
>  installation packages available, see:
>    http://ubuntuforums.org/showthread.php?p=3372887
>    https://help.ubuntu.com/community/DialupModemHowto/Intel537EP
>    http://ubuntuforums.org/showthread.php?p=2827908
>    https://help.ubuntu.com/community/DialupModemHowto/Intel536   with
> suggestions for improvements to c.marcano@xxxxxxxxx
>
> This above recent info may not be in your older Intel.txt
> For your Linspire installation, you will likely have to compile your
> own drivers.
> However you could install one of the Ubuntu linux-image packages, for
> which the precompiled drivers are available.
>
>
> The 536ep modem will not work in 64 bit mode, because Intel is not
> provided updates any longer.
>
> MarvS
>
> On 9/22/07, L & J Middleton <middletons@xxxxxxxxxxxx> wrote:
> > Hi,
> >
> > I have recently installed Freespire on a second partition on the hard drive.
> > When I first installed Windows XP on the first partition last year, I
> > created the second partition for the purpose of one day installing Linux. It
> > has been part of a long term plan to become a Linux user, inspired over the
> > years by articles promoting Linux in the magazine "NZ PC World". It has
> > taken a long time to reach this point, where I now have a version installed
> > on the hard drive.
> > I have been wondering what version to use. I went searching the internet,
> > hoping to find a suitable 64-bit version of Linux. In the process, I found
> > Eric Raymond and Rob Landley's article "World Domination 201". I am
> > fascinated by their analysis and conclusions, as they describe the situation
> > I find myself in - having a 64-bit AMD Athlon 64 3200+ processor - and
> > wondering what to do about running a 64-bit operating system. Further to
> > that, I was impressed by their comment to the effect that the intention
> > behind Linspire is to enable an OS that is as user friendly as Windows, and
> > potentially having access to all the types of programmes that my family
> > currently use in their computing experience. I'm interested to learn about
> > how a new OS runs, but my family don't. They just want to turn it on and
> > click on the programme of choice and use it. That includes music players,
> > photo software, scanner and printer, internet, office and paint software,
> > etc. Anything more complicated than that leads quickly to frustration. So,
> > obviously, any new OS that I install and try to make the default OS in our
> > household must, for the sake of family harmony, be capable of "click and
> > run", such as the promoters and developers behind Linspire and Freespire
> > hope to achieve.
> > As the 64-bit version is not ready yet, I decided to try out the currently
> > available 32-bit Freespire version. I would buy the 64-bit version of
> > Linspire when it becomes available as I would want the 64-bit OS, as well as
> > access to all the programmes and codecs that the family currently take for
> > granted using Windows.
> > Further to that, the budget still only allows for a dial-up modem. I
> > purchased this modem, a D-Link DFM-562I, a couple of years ago, mistakenly
> > thinking that "controllerless" meant that it would be suitable one day for
> > using with Linux. I now know that it must also be a Winmodem that I had been
> > trying to avoid. So, if this moden can function with Linux, I will be
> > grateful. I hope that in the future my next modem purchase will be  a
> > broad-band modem capable of running under 64-bit Linux. Last week, I was
> > tempted to go out and buy an external modem that already worked with Linux.
> > But then I realised that I was missing an opportunity to find out first-hand
> > how the Linux community works to solve a problem like this, so I decided to
> > try this approach first.
> > So that brings me to the point where I am trying to get this modem going
> > with this installation of Freespire.
> > Your help to activate the modem running with the Freespire OS will be
> > gratefully accepted.
> > Please note that despite intentions to the contrary, I am an almost total
> > Linux newbie.
> >
> > With regards,
> >
> > Lindsay Middleton
> > Palmerston North, New Zealand
> >
> >
> > Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List
> > Server.
> >  Do use the following as the email Subject Line:
> >            SomeName, YourCountry Freespire skipjack-feisty (development
> > version) ( kernel 2.6.20-16-lowlatency
> >  This will alert cogent experts, and  distinguish cases in the Archives.
> >  YourCountry will enable Country Code guidance.
> >  Occassionally responses are blocked by an Internet Provider mail filters.
> >  So in a day, also check the Archived responses at http://www.linmodems.org
> > .
> >  Local Linux experts can be found through:
> > http://www.linux.org/groups/index.html
> > --------------------------  System information ----------------------------
> > CPU=i686,  Freespire skipjack-feisty (development version) (
> > Linux version 2.6.20-16-lowlatency (root@terranova) (gcc version 4.1.2
> > (Ubuntu 4.1.2-0ubuntu4)) #2 SMP PREEMPT Wed May 23 01:49:41 UTC 2007
> >  scanModem update of:  2007_Sept_07
> >
> >
> >  There are no blacklisted modem drivers in /etc/modprobe*  files
> > USB modem not detected by lsusb
> >
> >
> > Several modems are supported by drivers with ALSA, the Advanced Linux Sound
> > Architecture software.
> > Copying ALSA diagnostics to Modem/ALSAroot.tgz
> > ALSAversion = 1.0.13
> >
> > Modem or candidate host audio card have firmware information and
> > diagnostics:
> >
> >  PCI slot PCI ID  SubsystemID Name
> >  ---------- --------- --------- --------------
> >  01:07.0 8086:1040 8086:1000 Communication controller: Intel Corporation
> > 536EP Data Fax Modem
> >
> >  Modem interrupt assignment and sharing:
> >  --- Bootup diagnostics for card in PCI slot 01:07.0 ----
> >
> >  === Finished modem firmware and bootup diagnostics section. ===
> >  === Next deducing cogent software ===
> >
> >  For candidate modem in PCI bus:  01:07.0
> >    Class 0780: 8086:1040 Communication controller: Intel Corporation 536EP
> > Data Fax Modem
> >       Primary PCI_id  8086:1040
> >  Support type needed or chipset: INTEL536EP
> >
> >
> >  In 2006, Intel appears to have ceased updates for Linux.
> >  For the INTEL537 and INTEL536 chipset modems, the most current support is
> > provided at:
> >        http://phep2.technion.ac.il/linmodems/packages/intel/Philippe.Vouters/
> >  But regular support is not available, see:
> > http://archives.linmodems.org/24939
> > :
> >  The outdated official Intel support packages can be accessed through:
> >        http://developer.intel.com/design/modems/support/drivers.htm
> >  Read Intel.txt and Modem/YourSystem.txt for follow through guidance.
> >
> >
> > Writing Intel.txt
> >
> >  Completed candidate modem analyses.
> >
> >  The base of the UDEV device file system is: /dev/.udev
> >
> >  Versions adequately match for the compiler installed: 4.1.2
> >              and the compiler used in kernel assembly: 4.1.2
> >
> >  linux-headers-2.6.20-16-lowlatency resources needed for compiling are not
> > manifestly ready!
> >
> >  If compiling is necessary packages must be installed, providing:
> >   kernel-source-2.6.20-16-lowlatency
> >
> > For Debian and some related distributions, a package kernel-kbuild-2.6-20
> > may be needed to support driver compiling
> >
> >
> > If a driver compilation files with message including some lack of some
> > FileName.h (stdio.h for example.
> > Some additional kernel-header files need installation to /usr/include.
> > For Debian/Ubuntu related distributions, run the following command to
> > display the needed package list:
> > $ sudo apt-get -s install linux-kernel-devel
> > While some of the files may be on the install CD, others may have to be
> > found through http://packages.ubuntu.com
> >
> > For Ubuntu Feisty, additional packages required were:
> >  libc6-dev linux-libc-dev
> > available through http://packages.ubuntu.com/ , if not on the install CD.
> > Such packages may have different names for other Linux distributions.
> > Try installing just the libc6-dev, then test the compile again.
> >
> >
> > Checking pppd properties:
> >  -rwsr-xr-- 1 root dip 269224 2007-04-04 23:41 /usr/sbin/pppd
> >
> > In case of an "error 17" "serial loopback" problem, see:
> >     http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
> >
> > To enable dialout without Root permission do:
> >  $ su - root  (not for Ubuntu)
> >          chmod a+x /usr/sbin/pppd
> > or under Ubuntu related Linuxes
> >   chmod a+x /usr/sbin/pppd
> >
> > Checking settings of: /etc/ppp/options
> > asyncmap 0
> > noauth
> > crtscts
> > lock
> > hide-password
> > modem
> > proxyarp
> > lcp-echo-interval 30
> > lcp-echo-failure 4
> > noipx
> >
> > In case of a message like:
> >    Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> >
> > Read Modem/YourSystem.txt concerning other COMM channels: eth0
> > Which can interfere with Browser naviagation.
> >
> >  Don't worry about the following, it is for the experts
> >  should trouble shooting be necessary.
> > ==========================================================
> >
> >  Checking for modem support lines:
> >  --------------------------------------
> >      /device/modem symbolic link:
> > slmodemd created symbolic link /dev/ttySL0:
> >      Within /etc/udev/ files:
> >
> >      Within /etc/modprobe.conf files:
> > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> > blacklist unwanted modem drivers
> > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> >      Within any ancient /etc/devfs files:
> >
> >      Within ancient kernel 2.4.n /etc/module.conf files:
> >
> > --------- end modem support lines --------
> >
> >
> >
>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux