Shuo, USA This is DeLi Linux 0.7.2 beta ( kernel 2.4.34.4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is my first report. Can I use my modem with DeLi
Linux? See below:

 Only plain text email is forwarded by the 
DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry This is DeLi Linux
0.7.2 beta ( kernel 2.4.34.4 
 This will alert cogent experts, and  distinguish
cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet
Provider mail filters.
 So in a day, also check the Archived responses at
http://www.linmodems.org .
 Local Linux experts can be found through:
http://www.linux.org/groups/index.html
--------------------------  System information
----------------------------
CPU=i586,  This is DeLi Linux 0.7.2 beta (
Linux version 2.4.34.4 (root@deli) (gcc version 3.3.6)
#1 Mon Mai 7 14:43:42 UTC 2007
 scanModem update of:  2007_August_28


 There are no blacklisted modem drivers in
/etc/modprobe*  files 
   /proc/bus/usb/devices file not present, barring USB
modem query.  

Modem or candidate host audio card have firmware
information and diagnostics:

 === Finished modem firmware and bootup diagnostics
section. ===
 === Next deducing cogent software ===


 	A modem was not detected among the PCI devices:
------------------------------------------------
00:08.0 VGA compatible controller: Cirrus Logic GD
5430/40 [Alpine] (rev 47)
------------------------------------------------
 with USB and bridge devices not displayed.
 Please provide any independent information available
on your modem.

	If your modem is mounted on an ISA card, scanModem
could not access it.
	If an alternative boot into Microsoft windows can be
done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View
(for Window XP) > System
> Hardware > Device Manager > Modems > Click on the +
> Modem. Double click to
expand the graphic. Manufacturer information may be
displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record
any hardware ID or vendor
and device information.
Next do the Query Modem and record the ATI
specifications displayed such as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name
perhaps MODEM.INF.
If may contain chipset Vendor informaton.

 Completed candidate modem analyses.

 A UDEV device file system is not active.

 Versions adequately match for the compiler installed:
3.3.6
             and the compiler used in kernel assembly:
3.3.6

 linux-headers-2.4.34.4 resources needed for compiling
are not manifestly ready!

 If compiling is necessary packages must be installed,
providing:
	 kernel-source-2.4.34.4


If a driver compilation files with message including
some lack of some FileName.h (stdio.h for example. 
Some additional kernel-header files need installation
to /usr/include.
For Debian/Ubuntu related distributions, run the
following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD,
others may have to be found through
http://packages.ubuntu.com

For Ubuntu Feisty, additional packages required were:
 libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not
on the install CD.
Such packages may have different names for other Linux
distributions.
Try installing just the libc6-dev, then test the
compile again.


Checking pppd properties:
	-rwxr-xr-x 1 root root 224880 2006-09-14 21:58
/usr/sbin/pppd

In case of an "error 17" "serial loopback" problem,
see:
   
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
lock
defaultroute
noipdefault
modem
usepeerdns
/dev/ttyS1
115200
crtscts
debug
passive
asyncmap 0

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets:
Permission denied
see
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the
experts
 should trouble shooting be necessary.
==========================================================

Windows 95 Diagnostics Report:

Port Information
Port: COM1
Interrupt: 3F8
UART: NFS 16550AN
Highest Speed: 115K Baud

Packard Bell 14.4AM(SP) Modem Soundcard
Identifier: GVC_Modem18
COMMAND		RESPONSE
ATI1 		255
ATI2 		OK
ATI3 		v2.200E-ACF/ATF_DP Rockwell RPI(TM) 

MODEM+01 

ATI4		a007880284C6002F
ATI4		bC60000000
ATI4		r1005111151012004
ATI4		r3000111170000000
ATI5		022
ATI6		RCV144DPG Rev
ATI7		000
ATI+FCLASS=?	0,1,80

--------------------------------

Written on the Board
RCV244ACF-P
Rockwell 95
R6725-11
9546 A78959-3
Mexico

ANALOG DEVICES
AD1845JP
SoundPort
9548
25324280

AZTECH
AT2316R
AZTECH SYSTEMS
R2
5360



       
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. 
http://mobile.yahoo.com/go?refer=1GNXIC

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux