Re: linux_newcomer, Ubuntu 6.06.1 LTS kernel 2.6.15-28-386

[Rodrigo Ritzel <rodrigornh@xxxxxxxxxxxx>]

Following your suggestion I've installed succesfully the linuxant 
driver, however when I use Gnome-PPP the modem connects but does not 
authenticate correctly, so the connection is cut off. Following is the 
log, the first log is without sudo , so there are some messages about 
PAP and CHAP, and the second log is with sudo (in Ubuntu there is no 
root acess, that's ok with me, but I don't know if I need to access 
Gnome-PPP (or wvdial, for that matter) with sudo).

I think we are almost getting there thanks to your help, by the way my 
name is Rodrigo from Brazil, and I'm trying to connect through Yahoo! 
free access.
Thanks again.




Marvin Stodolsky wrote:
> rbrguard2005
>
> Even though slmodemd suports interrogation of the this modem
> >   Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
> >      Primary PCI_id  8086:266d
> >    Subsystem PCI_id  1025:006a
> > 0:7c = 4358  and  0:7e = 5423
> > which were translated from hexadecimal code into:  CXT23
> -----
> through wvdialconf,
> it does NOT have the further capability to manage COMM functions of
> the ConeXanT 23 (CXT23) chipset.  For this chipset, there is NO
> alternative to using the hsfmodem software, as Antonio relates
>
> MarvS
> scanModem maintainer
>
> On 6/21/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
> > Looks like you need hsfmodem drivers.
> >
> >  For candidate modem in PCI bus:  0000:00:1e.3
> >   Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
> >      Primary PCI_id  8086:266d
> >    Subsystem PCI_id  1025:006a
> >    Softmodem codec or Vendor from diagnostics: CXT23, a Conexant type,
> >                              from    Archives: CXT, a Conexant type,
> >      CXT is  a generic for all CXTnumbers, with  Linuxant hsfmodem 
> > software support.
> >
> >  Lacking a dsp (digital signal processing) chip, the modem is a software
> >  intensive or "softmodem" type. Its primary controller manages the 
> > traffic
> >  with the CPU. But the software needed is specified in the Subsystem.
> >  -----------------------------------------
> > Support type needed or chipset:    hsfmodem
> >
> >  The hsfmodem package serves a great variety of Conexant chipset modems.
> >  From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> >  download hsfmodem_VersionSpec_k2.6.15_28_386_ubuntu_i386.deb.zip
> >                           with 2.6.15_28_386 equivalent to 
> > 2.6.15-28-386, your kernel version.
> >  Under Linux unpack with:
> >  $ unzip hsfmodem*.zip
> >  Then install with:
> >  $ sudo dpkg -i hsfmodem*.deb
> >  Subsequently, the modem should be found with
> >  $ sudo wvdialconf /etc/wvdial.conf
> >  Edit in your personal information with:
> >  $ sudo gedit /etc/wvdial.conf
> >  and try dialing out with:
> >  $ sudo wvdial.
> >  See Testing.txt  for details.
> >
> >  Read Conexant.txt
> >
> > Regards,
> >
> > Antonio
> >
> > ----- Original Message ----
> > From: "rbrguard2005-linhelp@xxxxxxxxxxxx" 
> > <rbrguard2005-linhelp@xxxxxxxxxxxx>
> > To: discuss@xxxxxxxxxxxxx
> > Sent: Wednesday, June 20, 2007 9:03:51 AM
> > Subject: linux_newcomer, Ubuntu 6.06.1 LTS  kernel 2.6.15-28-386
> >
> > Hi there,
> >
> > need you help folks, I've installed GNOME PPP, in this
> > program's setup the modem is detected as
> > Device:/dev/ttySL0 however, when I dial, the log
> > shows:
> >
> >
> >
> > --> Ignoring malformed input line: ";Do NOT edit this
> > file by hand!"
> > --> WvDial: Internet dialer version 1.55
> > --> Cannot get information for serial port.
> > --> Initializing modem.
> > --> Sending: ATZ
> > ATZ
> > OK
> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > OK
> > --> Modem initialized.
> > --> Sending: ATM1L3DT40040221
> > --> Waiting for carrier.
> > ATM1L3DT40040221
> > NO CARRIER
> > ERROR
> > --> No Carrier!  Trying again.
> > --> Maximum Attempts Exceeded..Aborting!!
> > --> Disconnecting at Wed Jun 20 10:57:23 2007
> >
> >
> >
> > ...even if I check "ignore carrier".
> >
> > So I've installed and run scanModem but I don't know
> > what to do next. I'm attaching the ModemData.txt as
> > suggested.
> >
> > Thank you very much!
> >
> >
> >
> > ____________________________________________________________________________________ 
> >
> > Novo Yahoo! Cadê? - Experimente uma nova busca.
> > http://yahoo.com.br/oqueeuganhocomisso
> >
> >
> >
> >
> >
> > ____________________________________________________________________________________ 
> >
> > Building a website is a piece of cake. Yahoo! Small Business gives 
> > you all the tools to get online.
> > http://smallbusiness.yahoo.com/webhosting