heyIf You're Problem doesn't solved,change the modem slot on motherboard.it may be solved you're problem such as mine!On 6/21/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:> Looks like you need hsfmodem drivers.>> For candidate modem in PCI bus: 0000:00:1e.3> Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW> Primary PCI_id 8086:266d> Subsystem PCI_id 1025:006a> Softmodem codec or Vendor from diagnostics: CXT23, a Conexant type,> from Archives: CXT, a Conexant type,> CXT is a generic for all CXTnumbers, with Linuxant hsfmodem software support.>> Lacking a dsp (digital signal processing) chip, the modem is a software> intensive or "softmodem" type. Its primary controller manages the traffic> with the CPU. But the software needed is specified in the Subsystem.> -----------------------------------------> Support type needed or chipset: hsfmodem>> The hsfmodem package serves a great variety of Conexant chipset modems.> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php> download hsfmodem_VersionSpec_k2.6.15_28_386_ubuntu_i386.deb.zip> with 2.6.15_28_386 equivalent to 2.6.15-28-386, your kernel version.> Under Linux unpack with:> $ unzip hsfmodem*.zip> Then install with:> $ sudo dpkg -i hsfmodem*.deb> Subsequently, the modem should be found with> $ sudo wvdialconf /etc/wvdial.conf> Edit in your personal information with:> $ sudo gedit /etc/wvdial.conf> and try dialing out with:> $ sudo wvdial.> See Testing.txt for details.>> Read Conexant.txt>> Regards,>> Antonio>> ----- Original Message ----> From: "rbrguard2005-linhelp@xxxxxxxxxxxx" <rbrguard2005-linhelp@xxxxxxxxxxxx>> To: discuss@xxxxxxxxxxxxx> Sent: Wednesday, June 20, 2007 9:03:51 AM> Subject: linux_newcomer, Ubuntu 6.06.1 LTS kernel 2.6.15-28-386>> Hi there,>> need you help folks, I've installed GNOME PPP, in this> program's setup the modem is detected as> Device:/dev/ttySL0 however, when I dial, the log> shows:>>>> --> Ignoring malformed input line: ";Do NOT edit this> file by hand!"> --> WvDial: Internet dialer version 1.55> --> Cannot get information for serial port.> --> Initializing modem.> --> Sending: ATZ> ATZ> OK> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> OK> --> Modem initialized.> --> Sending: ATM1L3DT40040221> --> Waiting for carrier.> ATM1L3DT40040221> NO CARRIER> ERROR> --> No Carrier! Trying again.> --> Maximum Attempts Exceeded..Aborting!!> --> Disconnecting at Wed Jun 20 10:57:23 2007>>>> ...even if I check "ignore carrier".>> So I've installed and run scanModem but I don't know> what to do next. I'm attaching the ModemData.txt as> suggested.>> Thank you very much!>>>> ____________________________________________________________________________________> Novo Yahoo! Cadê? - Experimente uma nova busca.> http://yahoo.com.br/oqueeuganhocomisso>>>>>> ____________________________________________________________________________________> Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online.> http://smallbusiness.yahoo.com/webhosting>
