I'M DEEPLY SORRY I'VE FORGOT TO ATTACH THE LOGS. HERE THEY ARE:
WITHOUT SUDO:
--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.55
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM1L3DT40040221
--> Waiting for carrier.
ATM1L3DT40040221
CONNECT 460800
--> Carrier detected. Waiting for prompt.
Internet Dial-up
Login:
--> Looks like a login prompt.
--> Sending: rbr
rbr
Password:
--> Looks like a password prompt.
--> Sending: (password)
** Bad Password
Login:
--> Looks like a login prompt.
--> Sending: rbr
rbr
Password:
--> Looks like a password prompt.
--> Sending: (password)
** Bad Password
Login:
--> Looks like a login prompt.
--> Sending: rbr
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Fri Jun 22 22:52:11 2007
--> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
--> --> PAP (Password Authentication Protocol) may be flaky.
--> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
--> --> CHAP (Challenge Handshake) may be flaky.
--> Pid of pppd: 10690
--> Using interface ppp0
--> Disconnecting at Fri Jun 22 22:52:15 2007
--> The PPP daemon has died: Authentication error.
--> We failed to authenticate ourselves to the peer.
--> Maybe bad account or password? (exit code = 19)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 19)
WITH SUDO:
--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.55
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM1L3DT40040221
--> Waiting for carrier.
ATM1L3DT40040221
CONNECT 460800
--> Carrier detected. Waiting for prompt.
Internet Dial-up
Login:
--> Looks like a login prompt.
--> Sending: rbr
rbr
Password:
--> Looks like a password prompt.
--> Sending: (password)
** Bad Password
Login:
--> Looks like a login prompt.
--> Sending: rbr
rbr
Password:
--> Looks like a password prompt.
--> Sending: (password)
** Bad Password
Login:
--> Looks like a login prompt.
--> Sending: rbr
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Fri Jun 22 21:25:36 2007
--> Pid of pppd: 7653
--> Using interface ppp0
--> Disconnecting at Fri Jun 22 21:25:41 2007
--> The PPP daemon has died: Authentication error.
--> We failed to authenticate ourselves to the peer.
--> Maybe bad account or password? (exit code = 19)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 19)
-------- Original Message --------
Subject: Re: linux_newcomer, Ubuntu 6.06.1 LTS kernel 2.6.15-28-386
Date: Mon, 25 Jun 2007 00:34:31 -0300
From: Rodrigo Ritzel <rodrigornh@xxxxxxxxxxxx>
To: discuss@xxxxxxxxxxxxx
CC: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
References: <816360.5358.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
<c27106ee0706240740p67ef2811k3cd9722827816d0a@xxxxxxxxxxxxxx>
Following your suggestion I've installed succesfully the linuxant
driver, however when I use Gnome-PPP the modem connects but does not
authenticate correctly, so the connection is cut off. Following is the
log, the first log is without sudo , so there are some messages about
PAP and CHAP, and the second log is with sudo (in Ubuntu there is no
root acess, that's ok with me, but I don't know if I need to access
Gnome-PPP (or wvdial, for that matter) with sudo).
I think we are almost getting there thanks to your help, by the way my
name is Rodrigo from Brazil, and I'm trying to connect through Yahoo!
free access.
Thanks again.
Marvin Stodolsky wrote:
rbrguard2005
Even though slmodemd suports interrogation of the this modem
Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary PCI_id 8086:266d
Subsystem PCI_id 1025:006a
0:7c = 4358 and 0:7e = 5423
which were translated from hexadecimal code into: CXT23
-----
through wvdialconf,
it does NOT have the further capability to manage COMM functions of
the ConeXanT 23 (CXT23) chipset. For this chipset, there is NO
alternative to using the hsfmodem software, as Antonio relates
MarvS
scanModem maintainer
On 6/21/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
Looks like you need hsfmodem drivers.
For candidate modem in PCI bus: 0000:00:1e.3
Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary PCI_id 8086:266d
Subsystem PCI_id 1025:006a
Softmodem codec or Vendor from diagnostics: CXT23, a Conexant type,
from Archives: CXT, a Conexant type,
CXT is a generic for all CXTnumbers, with Linuxant hsfmodem
software support.
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the
traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: hsfmodem
The hsfmodem package serves a great variety of Conexant chipset modems.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem_VersionSpec_k2.6.15_28_386_ubuntu_i386.deb.zip
with 2.6.15_28_386 equivalent to
2.6.15-28-386, your kernel version.
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See Testing.txt for details.
Read Conexant.txt
Regards,
Antonio
----- Original Message ----
From: "rbrguard2005-linhelp@xxxxxxxxxxxx"
<rbrguard2005-linhelp@xxxxxxxxxxxx>
To: discuss@xxxxxxxxxxxxx
Sent: Wednesday, June 20, 2007 9:03:51 AM
Subject: linux_newcomer, Ubuntu 6.06.1 LTS kernel 2.6.15-28-386
Hi there,
need you help folks, I've installed GNOME PPP, in this
program's setup the modem is detected as
Device:/dev/ttySL0 however, when I dial, the log
shows:
--> Ignoring malformed input line: ";Do NOT edit this
file by hand!"
--> WvDial: Internet dialer version 1.55
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM1L3DT40040221
--> Waiting for carrier.
ATM1L3DT40040221
NO CARRIER
ERROR
--> No Carrier! Trying again.
--> Maximum Attempts Exceeded..Aborting!!
--> Disconnecting at Wed Jun 20 10:57:23 2007
...even if I check "ignore carrier".
So I've installed and run scanModem but I don't know
what to do next. I'm attaching the ModemData.txt as
suggested.
Thank you very much!
____________________________________________________________________________________
Novo Yahoo! Cadê? - Experimente uma nova busca.
http://yahoo.com.br/oqueeuganhocomisso
____________________________________________________________________________________
Building a website is a piece of cake. Yahoo! Small Business gives
you all the tools to get online.
http://smallbusiness.yahoo.com/webhosting
