I Configured and Installed All Necessary Packages, In addition, Putted Carrier Check = no in the wvtest also wvdial.conf. The Following Massages are Result of Work. ---------------------------------------------- linux:~ # slmodemd /dev/ttyS0 SmartLink Soft Modem: version 2.9.11 Jun 18 2007 10:54:19 symbolic link `/dev/ttySL64' -> `/dev/pts/4' created. modem `ttyS0' created. TTY is `/dev/pts/4' Use `/dev/ttySL64' as modem device, Ctrl+C for termination. ----------------------------------------- linux:~ # wvdialconf wvtest Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Port Scan<*1>: S2 S3 ttyS4<Info>: No such device or address Port Scan<*1>: S4 ttyS5<Info>: No such device or address Port Scan<*1>: S5 ttyS6<Info>: No such device or address Port Scan<*1>: S6 ttyS7<Info>: No such device or address Port Scan<*1>: S7 WvModem<*1>: Cannot get information for serial port. ttySL64<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttySL64<*1>: ATQ0 V1 E1 -- OK ttySL64<*1>: ATQ0 V1 E1 Z -- OK ttySL64<*1>: ATQ0 V1 E1 S0=0 -- OK ttySL64<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttySL64<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttySL64<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttySL64<*1>: Modem Identifier: ATI -- SmartLink Soft Modem ttySL64<*1>: Speed 19200: AT -- OK ttySL64<*1>: Speed 38400: AT -- OK ttySL64<*1>: Speed 57600: AT -- OK ttySL64<*1>: Speed 115200: AT -- OK ttySL64<*1>: Speed 230400: AT -- OK ttySL64<*1>: Speed 460800: AT -- OK ttySL64<*1>: Max speed is 460800; that should be safe. ttySL64<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttySL64. Modem configuration written to wvtest. ttySL64<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" linux:~ # -------------------------------------------------- linux:~ # wvdial wvtest --> WvDial: Internet dialer version 1.54.0 --> Warning: section [Dialer wvtest] does not exist in wvdial.conf. --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Idle Seconds = 300, disabling automatic reconnect. --> Sending: ATDT0219718733 --> Waiting for carrier. ATDT0219718733 NO CARRIER ERROR --> No Carrier! Trying again. --> Sending: ATDT0219718733 --> Waiting for carrier. ATDT0219718733 NO CARRIER ERROR --> No Carrier! Trying again. --> Sending: ATDT0219718733 --> Waiting for carrier. ATDT0219718733 NO CARRIER ERROR --> No Carrier! Trying again. Caught signal #2! Attempting to exit gracefully... --> Disconnecting at Mon Jun 18 11:20:41 2007 linux:~ # -------------------------------------------- linux:~ # slmodemd error: mdm setup: cannot open dev `/dev/slamr0': No such device error: cannot setup device `/dev/slamr0' linux:~ # Send instant messages to your online friends http://uk.messenger.yahoo.com
