Samad
If compiling is necessary packages must be
installed, providing:
kernel-source-2.6.18.2-34-default
Then follow the directions in the Smartlink.txt for compiling and
installing the
ungrab-winmodem and slmodem packages.
List,
I'm traveling for 10 days and online infrequently
MarvS
On 6/17/07, samad abbasi <s_abbasi12@xxxxxxxxx> wrote:
I Have Another System With Same Modem,
and have OpenSuse 12.
remember openSuse Working With RPM Package not DEB.
slmar Have A .deb package so does'nt Work in
OpenSuse!
Send instant messages to your online friends http://uk.messenger.yahoo.com
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry
Welcome to openSUSE 10.2 (i586) - Kernel kernel 2.6.18.2-34-default
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686,
Welcome to openSUSE 10.2 (i586) - Kernel
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
scanModem update of: 2007_May_11
ALSAversion 1.0.13
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:0b.0 10b9:545a 201f:545a Modem: ALi Corporation SmartLink SmartPCI563 56K Modem
Modem interrupt assignment and sharing:
--- Bootup diagnositcs for card in PCI slot 00:0b.0 ----
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 169
0000:00:0b.0: ttyS2 at I/O 0xd028 (irq = 169) is a 8250
0000:00:0b.0: ttyS3 at I/O 0xd040 (irq = 169) is a 8250
Couldn't register serial port 0000:00:0b.0: -28
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 00:0b.0
Class 0703: 10b9:545a Modem: ALi Corporation SmartLink SmartPCI563 56K Modem
Primary PCI_id 10b9:545a
Support type needed or chipset: slamr
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.18.2-34-default
For Debian and some related distributions, a package kernel-kbuild-2.6-3 may be needed to support driver compiling
Checking pppd properties:
-rwxr-xr-x 1 root dialout 295488 2006-11-25 16:50 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k", GROUP="uucp"
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
