Hugo, Loading the drivers should create ports dynamically under direction of
/etc/udev/rules.d/10-local.rules:KERNEL="ttyAGS[0-9]", NAME="%k", MODE="0660", GROUP="dialout", SYMLINK="modem" /etc/udev/rules.d/10-local.rules~:#agrmodem
So upon your next bootup do a preliminary: $ lsmod | grep agr $ ls -l /dev/modem /dev/ttyAGS* Then load the drivers $ sudo modprobe agrmodem Even on my System without the right modem hardware: $ lsmod | grep agr agrmodem 1180772 0 intermodule 4100 1 agrmodem Then the hardware requiring step $ sudo modprobe agrserial Check kernel messages: $ dmesg | grep agr and for port creation $ ls -l /dev/modem /dev/ttyAGS* Report back MarvS On 6/11/07, Hugo Canalli <hugocanalli@xxxxxxxxxxxxxxxxxx> wrote:
Don't work. Follow my terminal commands: hugleo@hugleo-desktop:~$ sudo ln -s /dev/ttyAGS3 /dev/ttySAGR hugleo@hugleo-desktop:~$ sudo modprobe agrmodem hugleo@hugleo-desktop:~$ sudo modprobe agrserial hugleo@hugleo-desktop:~$ ls -l /dev/modem /dev/ttyAGS3 lrwxrwxrwx 1 root root 7 2007-06-11 09:41 /dev/modem -> ttyAGS3 crw-rw---- 1 root dialout 62, 67 2007-06-11 09:47 /dev/ttyAGS3 hugleo@hugleo-desktop:~$ sudo wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 S4 S5 S6 S7 S8 Modem Port Scan<*1>: S9 S10 S11 S12 S13 S14 S15 S16 Modem Port Scan<*1>: S17 S18 S19 S20 S21 S22 S23 S24 Modem Port Scan<*1>: S25 S26 S27 S28 S29 S30 S31 S32 Modem Port Scan<*1>: S33 S34 S35 S36 S37 S38 S39 S40 Modem Port Scan<*1>: S41 S42 S43 S44 S45 S46 S47 ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wiki/?WvDial If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>. hugleo@hugleo-desktop:~$ ----- Original Message ----- From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> To: "Hugo Canalli" <hugocanalli@xxxxxxxxxxxxxxxxxx>; "Robert Best" <rwbest@xxxxxxx> Cc: <discuss@xxxxxxxxxxxxx>; "Alexei Chentsov" <chentsov@xxxxxxxxxxxx> Sent: Monday, June 11, 2007 1:17 AM Subject: Re: Agere AGRSM don't detected - ModemData > Robert, > Please track this discussion in case we have language problems. > > Hugo > These support lines look effective: > ------------------ > /etc/udev/rules.d/10-local.rules:# creates symlink /dev/modem to > /dev/ttyAGS?, and takes care of permissions > /etc/udev/rules.d/10-local.rules:KERNEL="ttyAGS[0-9]", NAME="%k", > MODE="0660", GROUP="dialout", SYMLINK="modem" > /etc/udev/rules.d/10-local.rules~:#agrmodem > /etc/udev/rules.d/10-local.rules~:KERNEL="ttyAGS3", SYMLINK="modem" > ------------------- > Was > /dev/modem -->/dev/ttyAGS3 > created automatically upon > $ sudo modprobe agrmodem > $ sudo modprobe agrserial > or did you do something manually?? > > What is shown by: > $ ls -l /dev/modem /dev/ttyAGS3 > If there is > /dev/modem --> /dev/ttyAGS3 > Try again running: > $ sudo wvdialconf /etc/wvdial.conf > > If you have previously installed any ltmodem drivers, please > uninstall/delete the: > ltmodem.ko, ltserial.ko and /dev/ttyLT0 . They are for a different > modem type and may complicate issues. > > MarvS > > On 6/10/07, Hugo Canalli <hugocanalli@xxxxxxxxxxxxxxxxxx> wrote: >> Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List >> Server. >> Do use the following as the email Subject Line: >> SomeName, YourCountry Ubuntu 6.06 LTS kernel 2.6.15-23-386 >> This will alert cogent experts, and distinguish cases in the Archives. >> YourCountry will enable Country Code guidance. >> Occassionally responses are blocked by an Internet Provider mail >> filters. >> So in a day, also check the Archived responses at >> http://www.linmodems.org >> . >> Local Linux experts can be found through: >> http://www.linux.org/groups/index.html >> -------------------------- System >> information ---------------------------- >> CPU=i686, Ubuntu 6.06 LTS >> Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu >> 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006 >> scanModem update of: 2007_May_11 >> The modem symbolic link is /dev/modem -> /dev/ttyAGS3 >> >> ALSAversion 1.0.10 >> USB modem not detected by lsusb >> >> Modem or host audio card candidates have firmware information: >> >> PCI slot PCI ID SubsystemID Name >> ---------- --------- --------- -------------- >> 0000:01:09.0 11c1:0620 11c1:0620 Communication controller: Agere >> Systems: >> Unknown device 0620 >> >> Modem interrupt assignment and sharing: >> 10: 0 IO-APIC-edge AgerePCI >> >> --- Bootup diagnositcs for card in PCI slot 0000:01:09.0 ---- >> >> === Finished modem firmware and bootup diagnostics section. === >> === Next deducing cogent software === >> >> For candidate modem in PCI bus: 0000:01:09.0 >> Class 0780: 11c1:0620 Communication controller: Agere Systems: Unknown >> device 0620 >> Primary PCI_id 11c1:0620 >> Support type needed or chipset: Agere.SV2PP_potentially_supported >> >> >> >> Vendor 11c1 is Lucent Technologies with modem technology now under LSI >> Inc. >> Their Linux code developer/maintainer is Soumyendu Sarkar. Support for a >> chipset and its >> continued maintenance is only initiated at the request of a major >> chipset >> buyer, >> or comparable sponsor. Several different modem chipset types are >> produced: >> with varying support under Linux. >> Device ID Support Name Comment >> --------- ------------- ----------- ----------------------------- >> 0480 serial drivers Venus controller chipset 1673JV7 >> 0440-045d martian Mars/Apollo DSP (digital signal >> processing) >> chipsets >> 0462 none 56K.V90/ADSL Wildwire >> 048d none SV2P soft modem >> 048(c or f) AGRSM SV2P soft modem >> 0600 none soft modem, very few in the field. >> 0620 AGRSM Pinball soft modem, in some HP desktop PCs >> 062(1-3) none SV92PP,Pinball soft modem, in some HP desktop >> PCs >> >> AGRSM - At >> http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/ >> agrsm-alpha.tar.bz2 potentially provides support for PCI_id chipsets >> 11c1:048c, 11c1:048f and 11c1:0620 >> in addition to prior support of Subsystems under Intel 8086:???? below >> 11C1:048C >> 11C1:048F >> 11C1:0620 >> 8086:(2416 2426 7196 2486 24C6 24CD6 266D) are soft modem controllers, >> better >> supported through ALSA modem drivers and the Smartlink slmodemd >> helper. >> >> There has only been one reported success for 11c1:048c, 11c1:048f and >> 11c1:0620. See: >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00849.html >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00970.html >> Interaction with experts will likely be necessary to get any of these >> modems >> working. >> >> -------------- end Agere Systems section ------------------- >> >> Completed candidate modem analyses. >> >> The base of the UDEV device file system is: /dev/.udev >> >> Versions adequately match for the compiler installed: 4.0.3 >> and the compiler used in kernel assembly: 4.0.3 >> >> >> >> Compiling resources appear complete: >> make utility - /usr/bin/make >> Compiler version 4.0 >> kernel_headers base folder /lib/modules/2.6.15-23-386/build >> >> >> Checking pppd properties: >> -rwsr-xr-- 1 root dip 257720 2006-02-23 13:33 /usr/sbin/pppd >> >> In case of an "error 17" "serial loopback" problem, see: >> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html >> >> To enable dialout without Root permission do: >> $ su - root (not for Ubuntu) >> sudo chmod a+x /usr/sbin/pppd >> or under Ubuntu related Linuxes >> sudo chmod a+x /usr/sbin/pppd >> >> Checking settings of: /etc/ppp/options >> asyncmap 0 >> auth >> crtscts >> lock >> hide-password >> modem >> proxyarp >> lcp-echo-interval 30 >> lcp-echo-failure 4 >> noipx >> >> In case of a message like: >> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >> >> Read Modem/YourSystem.txt concerning other COMM channels: eth0 >> Which can interfere with Browser naviagation. >> >> Don't worry about the following, it is for the experts >> should trouble shooting be necessary. >> ========================================================== >> >> Checking for modem support lines: >> -------------------------------------- >> /device/modem symbolic link: lrwxrwxrwx 1 root root 12 2007-05-17 >> 16:18 /dev/modem -> /dev/ttyAGS3 >> slmodemd created symbolic link /dev/ttySL0: >> Within /etc/udev/ files: >> /etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink >> /etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*", >> SYMLINK+="modem" >> /etc/udev/rules.d/10-local.rules:# UDEV rule for ltmodem >> /etc/udev/rules.d/10-local.rules:# creates symlink /dev/modem to >> /dev/ttyAGS?, and takes care of permissions >> /etc/udev/rules.d/10-local.rules:KERNEL="ttyAGS[0-9]", NAME="%k", >> MODE="0660", GROUP="dialout", SYMLINK="modem" >> /etc/udev/rules.d/10-local.rules~:#agrmodem >> /etc/udev/rules.d/10-local.rules~:KERNEL="ttyAGS3", SYMLINK="modem" >> Within /etc/modprobe.conf files: >> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to >> blacklist unwanted modem drivers >> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >> Within any ancient /etc/devfs files: >> >> Within ancient kernel 2.4.n /etc/module.conf files: >> /etc/modules:agrmodem >> /etc/modules~:#agrmodem >> --------- end modem support lines -------- >> >> >> >> ----- Original Message ----- >> From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> >> To: "Hugo Canalli" <hugocanalli@xxxxxxxxxxxxxxxxxx> >> Cc: <discuss@xxxxxxxxxxxxx>; "Alexei Chentsov" <chentsov@xxxxxxxxxxxx> >> Sent: Sunday, June 10, 2007 10:01 PM >> Subject: Re: Agere AGRSM don't detected >> >> >> > Hugo, >> > >> > We are very interested in modems potentially served by agrsm-alpha and >> > will help. >> > But please send us the ModemData.txt output by scanModem, so we can >> > best understand your hardware. Please copy to "Alexei Chentsov" >> > <chentsov@xxxxxxxxxxxx> who best understands the code. >> > >> > Note that if a port like /dev/ttyAGS3 was created by driver loading, >> > a symbolic link can be created: >> > $ sudo ln -s /dev/ttyAGS3 /dev/ttySAGR. >> > Then subsequently wvdialconf will test /dev/ttySAGR --> >> > /dev/ttyAGS3 >> > >> > >> > MarvS >> > scanModem maintainer >> > >> > On 6/10/07, Hugo Canalli <hugocanalli@xxxxxxxxxxxxxxxxxx> wrote: >> >> >> >> Driver: "agrsm-alpha.tar.bz2" >> >> >> >> I use the Ubuntu. I've compiled the driver. I've loaded the modules >> >> and >> >> created links correctly. But I do not obtain the message "modem >> >> detected". >> >> The wvdial makes this: Port Scan: Scanning ttyLTM0 first, /dev/modem >> >> is >> >> link >> >> you it. >> >> When it would have to be perhaps: Port Scan: Scanning ttyAGS3 first, >> >> /dev/modem is link you it. >> >> The symbolic links are ok. >> >> Do you anybody could help me? >> >> >> >> []'s >> >> >> >> >> > >> > >> > >> > -- >> > No virus found in this incoming message. >> > Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: >> > 269.8.11/838 - Release Date: 7/6/2007 14:21 >> > >> > >> >> > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: > 269.8.13/843 - Release Date: 10/6/2007 13:39 > >
