Re: Agere AGRSM don't detected - wvdial error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Don't work.

Follow my terminal commands:

hugleo@hugleo-desktop:~$ sudo ln -s /dev/ttyAGS3  /dev/ttySAGR
hugleo@hugleo-desktop:~$ sudo modprobe agrmodem
hugleo@hugleo-desktop:~$ sudo modprobe agrserial
hugleo@hugleo-desktop:~$ ls -l  /dev/modem  /dev/ttyAGS3
lrwxrwxrwx 1 root root         7 2007-06-11 09:41 /dev/modem -> ttyAGS3
crw-rw---- 1 root dialout 62, 67 2007-06-11 09:47 /dev/ttyAGS3
hugleo@hugleo-desktop:~$ sudo wvdialconf  /etc/wvdial.conf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3   S4   S5   S6   S7   S8
Modem Port Scan<*1>: S9   S10  S11  S12  S13  S14  S15  S16
Modem Port Scan<*1>: S17  S18  S19  S20  S21  S22  S23  S24
Modem Port Scan<*1>: S25  S26  S27  S28  S29  S30  S31  S32
Modem Port Scan<*1>: S33  S34  S35  S36  S37  S38  S39  S40
Modem Port Scan<*1>: S41  S42  S43  S44  S45  S46  S47
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.
hugleo@hugleo-desktop:~$



----- Original Message ----- From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> To: "Hugo Canalli" <hugocanalli@xxxxxxxxxxxxxxxxxx>; "Robert Best" <rwbest@xxxxxxx>
Cc: <discuss@xxxxxxxxxxxxx>; "Alexei Chentsov" <chentsov@xxxxxxxxxxxx>
Sent: Monday, June 11, 2007 1:17 AM
Subject: Re: Agere AGRSM don't detected - ModemData


Robert,
  Please track this discussion in case we have language problems.

Hugo
   These support lines look effective:
------------------
/etc/udev/rules.d/10-local.rules:#  creates symlink /dev/modem to
/dev/ttyAGS?, and takes care of permissions
/etc/udev/rules.d/10-local.rules:KERNEL="ttyAGS[0-9]", NAME="%k",
MODE="0660", GROUP="dialout", SYMLINK="modem"
/etc/udev/rules.d/10-local.rules~:#agrmodem
/etc/udev/rules.d/10-local.rules~:KERNEL="ttyAGS3", SYMLINK="modem"
-------------------
Was
/dev/modem -->/dev/ttyAGS3
created automatically upon
$ sudo modprobe agrmodem
$ sudo modprobe agrserial
or did you do something manually??

What is shown by:
$  ls -l  /dev/modem  /dev/ttyAGS3
If there is
   /dev/modem  --> /dev/ttyAGS3
Try again running:
$ sudo wvdialconf  /etc/wvdial.conf

If you have previously installed any ltmodem drivers, please
uninstall/delete the:
ltmodem.ko, ltserial.ko and /dev/ttyLT0 . They are for a different
modem type and may complicate issues.

MarvS

On 6/10/07, Hugo Canalli <hugocanalli@xxxxxxxxxxxxxxxxxx> wrote:
 Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List
Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry Ubuntu 6.06 LTS  kernel 2.6.15-23-386
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters. So in a day, also check the Archived responses at http://www.linmodems.org
.
 Local Linux experts can be found through:
http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686,  Ubuntu 6.06 LTS
Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu
4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
 scanModem update of:  2007_May_11
The modem symbolic link is /dev/modem -> /dev/ttyAGS3

ALSAversion 1.0.10
USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot PCI ID  SubsystemID Name
 ---------- --------- --------- --------------
0000:01:09.0 11c1:0620 11c1:0620 Communication controller: Agere Systems:
Unknown device 0620

 Modem interrupt assignment and sharing:
 10:          0    IO-APIC-edge  AgerePCI

 --- Bootup diagnositcs for card in PCI slot 0000:01:09.0 ----

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

 For candidate modem in PCI bus:  0000:01:09.0
   Class 0780: 11c1:0620 Communication controller: Agere Systems: Unknown
device 0620
      Primary PCI_id  11c1:0620
 Support type needed or chipset: Agere.SV2PP_potentially_supported



Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux  code developer/maintainer is Soumyendu Sarkar. Support for a
chipset and its
continued maintenance is only initiated at the request of a major chipset
buyer,
 or comparable sponsor. Several different  modem chipset types  are
produced:
 with varying support under Linux.
 Device ID  Support        Name           Comment
 ---------  -------------  -----------    -----------------------------
 0480       serial drivers Venus           controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal processing)
chipsets
 0462       none           56K.V90/ADSL Wildwire
 048d none               SV2P            soft modem
 048(c or f) AGRSM         SV2P            soft modem
 0600       none           soft modem, very few in the field.
 0620       AGRSM          Pinball  soft modem, in some HP desktop PCs
 062(1-3)   none           SV92PP,Pinball  soft modem, in some HP desktop
PCs

AGRSM - At
http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/
agrsm-alpha.tar.bz2 potentially provides support for PCI_id chipsets
   11c1:048c,  11c1:048f and 11c1:0620
in addition to prior support of Subsystems under Intel 8086:???? below
11C1:048C
11C1:048F
11C1:0620
8086:(2416 2426 7196 2486 24C6 24CD6 266D) are soft modem controllers,
better
supported through ALSA modem drivers and the Smartlink slmodemd helper.

There has only been one reported success for 11c1:048c, 11c1:048f and
11c1:0620. See:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00849.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00970.html
Interaction with experts will likely be necessary to get any of these modems
working.

-------------- end Agere Systems section -------------------

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.0.3
             and the compiler used in kernel assembly: 4.0.3



 Compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.0
   kernel_headers base folder /lib/modules/2.6.15-23-386/build


Checking pppd properties:
 -rwsr-xr-- 1 root dip 257720 2006-02-23 13:33 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
 $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
 sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 12 2007-05-17
16:18 /dev/modem -> /dev/ttyAGS3
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",
SYMLINK+="modem"
/etc/udev/rules.d/10-local.rules:# UDEV rule for ltmodem
/etc/udev/rules.d/10-local.rules:#  creates symlink /dev/modem to
/dev/ttyAGS?, and takes care of permissions
/etc/udev/rules.d/10-local.rules:KERNEL="ttyAGS[0-9]", NAME="%k",
MODE="0660", GROUP="dialout", SYMLINK="modem"
/etc/udev/rules.d/10-local.rules~:#agrmodem
/etc/udev/rules.d/10-local.rules~:KERNEL="ttyAGS3", SYMLINK="modem"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules:agrmodem
/etc/modules~:#agrmodem
--------- end modem support lines --------



----- Original Message -----
From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
To: "Hugo Canalli" <hugocanalli@xxxxxxxxxxxxxxxxxx>
Cc: <discuss@xxxxxxxxxxxxx>; "Alexei Chentsov" <chentsov@xxxxxxxxxxxx>
Sent: Sunday, June 10, 2007 10:01 PM
Subject: Re: Agere AGRSM don't detected


> Hugo,
>
> We are very interested in modems potentially served by agrsm-alpha and
> will help.
> But please send us the ModemData.txt output by scanModem, so we can
> best understand your hardware.  Please copy to  "Alexei Chentsov"
> <chentsov@xxxxxxxxxxxx> who best understands the code.
>
> Note that if a port like  /dev/ttyAGS3  was created by driver loading,
> a symbolic link can be created:
> $ sudo ln -s /dev/ttyAGS3  /dev/ttySAGR.
> Then subsequently wvdialconf will test /dev/ttySAGR --> > /dev/ttyAGS3
>
>
> MarvS
> scanModem maintainer
>
> On 6/10/07, Hugo Canalli <hugocanalli@xxxxxxxxxxxxxxxxxx> wrote:
>>
>> Driver: "agrsm-alpha.tar.bz2"
>>
>> I use the Ubuntu. I've compiled the driver. I've loaded the modules >> and
>> created links correctly. But I do not obtain the message "modem
>> detected".
>> The wvdial makes this: Port Scan: Scanning ttyLTM0 first, /dev/modem >> is
>> link
>> you it.
>> When it would have to be perhaps: Port Scan: Scanning ttyAGS3 first,
>> /dev/modem is link you it.
>> The symbolic links are ok.
>> Do you anybody could help me?
>>
>> []'s
>>
>>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition. Version: 7.5.472 / Virus Database:
> 269.8.11/838 - Release Date: 7/6/2007 14:21
>
>





--
No virus found in this incoming message.
Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.13/843 - Release Date: 10/6/2007 13:39




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux