Ok Antonio, thanks.
When the problem started the kernel development community had given me
(personally) notice that it would be fixed, and had been. So it's
obviously back - Phoenix.
Thanks again
Jacques
Antonio Olivares wrote:
--- Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
--- Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
wrote:
Ungrab-winmodem becomes irrelevant with 2.6.21
kernels, I think.
I'll stop including it in new slamr-2.6.N.tar.gz
then.
Marv
On 6/3/07, Jacques Goldberg
<Jacques.Goldberg@xxxxxxx> wrote:
Done.
Thanks, Marv.
Good luck, Hasan.
Antonio,
Just in case you have not seen this before, look
at the 1st-README in
the tarball.
Marv's work in these files removes most of the
burden, and this is very
important for newcomers.
Reminder, full path for download:
http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/slamr-2.6.20-15-386.tar.gz
Marv: is ungrab-modem still relevant for such
high
kernels? I have lost
the thread there, it seems.
Jacques
Please do not remove ungrab-winmodem as it still
might
be needed. I'll run some tests without it,
currently
under 2.6.21.1 kernel and report back.
Regards,
Antonio
____________________________________________________________________________________
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel
sites to find flight and hotel bargains.
http://farechase.yahoo.com/promo-generic-14795097
Marv, Jacques, et all.
Ungrab-winmodem is still needed. Without it
connections will fail.
root@slax:~/slmodem-2.9.11-20070505# modprobe slamr
root@slax:~/slmodem-2.9.11-20070505# slmodemd -c USA
/dev/slamr0
error: mdm setup: cannot open dev `/dev/slamr0': No
such device
error: cannot setup device `/dev/slamr0'
root@slax:~/slmodem-2.9.11-20070505#
root@slax:~/slmodem-2.9.11-20070505# dmesg
Linux version 2.6.21.1 (root@slax) (gcc version 4.1.2)
#1 SMP Wed May 2 16:49:45 GMT 2007
....
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
slamr: device 163c:3052 is grabbed by another driver
root@slax:~# rmmod slamr
root@slax:~# rmmod ungrab-winmodem
root@slax:~# modprobe ungrab-winmodem
root@slax:~# modprobe slamr
root@slax:~# slmodemd -c USA /dev/slarm0
error: mdm setup: cannot stat `/dev/slarm0': No such
file or directory
error: cannot setup device `/dev/slarm0'
root@slax:~# /usr/sbin/slmodemd --country=USA
/dev/slamr0
SmartLink Soft Modem: version 2.9.11 Jun 3 2007
18:27:01
symbolic link `/dev/ttySL0' -> `/dev/pts/4' created.
modem `slamr0' created. TTY is `/dev/pts/4'
Use `/dev/ttySL0' as modem device, Ctrl+C for
termination.
PPP generic driver version 2.4.2
pci_set_power_state(): 0000:00:0b.0: state=3, current
state=5
PPP BSD Compression module registered
PPP Deflate Compression module registered
It is needed! Please do not remove it.
Regards,
Antonio
____________________________________________________________________________________
Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
http://farechase.yahoo.com/
