--- Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > > --- Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > wrote: > > > Ungrab-winmodem becomes irrelevant with 2.6.21 > > kernels, I think. > > I'll stop including it in new slamr-2.6.N.tar.gz > > then. > > > > Marv > > > > On 6/3/07, Jacques Goldberg > > <Jacques.Goldberg@xxxxxxx> wrote: > > > Done. > > > Thanks, Marv. > > > Good luck, Hasan. > > > > > > Antonio, > > > Just in case you have not seen this before, look > > at the 1st-README in > > > the tarball. > > > Marv's work in these files removes most of the > > burden, and this is very > > > important for newcomers. > > > Reminder, full path for download: > > > > > > http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/slamr-2.6.20-15-386.tar.gz > > > > > > > > > Marv: is ungrab-modem still relevant for such > high > > kernels? I have lost > > > the thread there, it seems. > > > > > > Jacques > > > > > > > Please do not remove ungrab-winmodem as it still > might > be needed. I'll run some tests without it, > currently > under 2.6.21.1 kernel and report back. > > Regards, > > Antonio > > > > ____________________________________________________________________________________ > Finding fabulous fares is fun. > Let Yahoo! FareChase search your favorite travel > sites to find flight and hotel bargains. > http://farechase.yahoo.com/promo-generic-14795097 > Marv, Jacques, et all. Ungrab-winmodem is still needed. Without it connections will fail. root@slax:~/slmodem-2.9.11-20070505# modprobe slamr root@slax:~/slmodem-2.9.11-20070505# slmodemd -c USA /dev/slamr0 error: mdm setup: cannot open dev `/dev/slamr0': No such device error: cannot setup device `/dev/slamr0' root@slax:~/slmodem-2.9.11-20070505# root@slax:~/slmodem-2.9.11-20070505# dmesg Linux version 2.6.21.1 (root@slax) (gcc version 4.1.2) #1 SMP Wed May 2 16:49:45 GMT 2007 .... slamr: module license 'Smart Link Ltd.' taints kernel. slamr: SmartLink AMRMO modem. slamr: device 163c:3052 is grabbed by another driver root@slax:~# rmmod slamr root@slax:~# rmmod ungrab-winmodem root@slax:~# modprobe ungrab-winmodem root@slax:~# modprobe slamr root@slax:~# slmodemd -c USA /dev/slarm0 error: mdm setup: cannot stat `/dev/slarm0': No such file or directory error: cannot setup device `/dev/slarm0' root@slax:~# /usr/sbin/slmodemd --country=USA /dev/slamr0 SmartLink Soft Modem: version 2.9.11 Jun 3 2007 18:27:01 symbolic link `/dev/ttySL0' -> `/dev/pts/4' created. modem `slamr0' created. TTY is `/dev/pts/4' Use `/dev/ttySL0' as modem device, Ctrl+C for termination. PPP generic driver version 2.4.2 pci_set_power_state(): 0000:00:0b.0: state=3, current state=5 PPP BSD Compression module registered PPP Deflate Compression module registered It is needed! Please do not remove it. Regards, Antonio ____________________________________________________________________________________ Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. http://farechase.yahoo.com/
