Hi,
Attached is my output from scanModem.
I am a Linux newbie but I did run Mandrake 10.1 on my old Dell, also had
winmodem issues but at the time I was travelling in southern Europe and used
my mobile as a modem just for emails, 10.1 with KDE had no problem using
bluetooth to access my Nokia and use it as a modem. Sadly a close encounter
with a Bacardi and Coke was the final insult to my ageing Dell !!
In the meantime, whilst adding to Mr. Gates user base (Win XP), I have at
least migrated to OpenOffice for day to day work and my hobby related
applications (ham radio) seem well supported on Ubuntu so once the modem
issue is resolved I can finally close all Windows and reboot !!
I haven't tried this bluetooth option with Ubuntu on my IBM T40 but it's not
really an answer given mobile phone costs in Ireland.
I have looked at the IBM links for Linux drivers but these seem to lead to a
dead end.
I did a little programming years ago using q-basic on my first real PC, an
Amstrad with CPM/plus as the OS but this is so long ago so "paint by
numbers" type of advice would be ideal.
Finally I live in a non-broadband rural area so dial up is a must, if the
T40's modem is a lost cause are there any decent USB modems out there with
no Linux isses ?
Thanks for your help,
Craig
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 7.04 kernel 2.6.20-15-generic
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Ubuntu 7.04
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
scanModem update of: 2007_May_11
ALSAversion 1.0.13
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 1014:0524 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
11: 55745 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, eth0, yenta, yenta, eth1, Intel 82801DB-ICH4, radeon@pci:0000:01:00.0
--- Bootup diagnositcs for card in PCI slot 00:1f.6 ----
[ 50.369447] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 50.369457] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.20-15-generic
Checking pppd properties:
-rwsr-xr-- 1 root dip 269224 2007-04-05 03:41 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 eth0:avah eth1:avah
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0
0: 256595 XT-PIC-XT timer
1: 86 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
6: 221 XT-PIC-XT floppy
7: 0 XT-PIC-XT parport0
8: 3 XT-PIC-XT rtc
9: 1019 XT-PIC-XT acpi
11: 55747 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, eth0, yenta, yenta, eth1, Intel 82801DB-ICH4, radeon@pci:0000:01:00.0
12: 2337 XT-PIC-XT i8042
14: 972 XT-PIC-XT libata
15: 7156 XT-PIC-XT libata
NMI: 0
LOC: 0
ERR: 0
MIS: 0
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fe60000 end: 000000001ff60000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001ff60000 size: 0000000000017000 end: 000000001ff77000 type: 3
[ 0.000000] copy_e820_map() start: 000000001ff77000 size: 0000000000002000 end: 000000001ff79000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ff80000 size: 0000000000080000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff60000 (usable)
[ 0.000000] BIOS-e820: 000000001ff60000 - 000000001ff77000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130912) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130912
[ 0.000000] HighMem 130912 -> 130912
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130912
[ 0.000000] On node 0 totalpages: 130912
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 990 pages used for memmap
[ 0.000000] Normal zone: 125826 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v002 IBM ) @ 0x000f6d70
[ 0.000000] ACPI: XSDT (v001 IBM TP-1R 0x00003200 LTP 0x00000000) @ 0x1ff6a6cd
[ 0.000000] ACPI: FADT (v003 IBM TP-1R 0x00003200 IBM 0x00000001) @ 0x1ff6a800
[ 0.000000] ACPI: SSDT (v001 IBM TP-1R 0x00003200 MSFT 0x0100000e) @ 0x1ff6a9b4
[ 0.000000] ACPI: ECDT (v001 IBM TP-1R 0x00003200 IBM 0x00000001) @ 0x1ff76ebc
[ 0.000000] ACPI: TCPA (v001 IBM TP-1R 0x00003200 PTL 0x00000001) @ 0x1ff76f0e
[ 0.000000] ACPI: BOOT (v001 IBM TP-1R 0x00003200 LTP 0x00000001) @ 0x1ff76fd8
[ 0.000000] ACPI: DSDT (v001 IBM TP-1R 0x00003200 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
[ 0.000000] Detected 1495.188 MHz processor.
[ 48.117275] Built 1 zonelists. Total pages: 129890
[ 48.117280] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 48.117538] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 48.117546] mapped APIC to ffffd000 (0140a000)
[ 48.117550] Enabling fast FPU save and restore... done.
[ 48.117553] Enabling unmasked SIMD FPU exception support... done.
[ 48.117563] Initializing CPU#0
[ 48.117629] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 48.119211] Console: colour VGA+ 80x25
[ 48.119506] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 48.119809] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 48.138704] Memory: 507968k/523648k available (1992k kernel code, 15156k reserved, 893k data, 328k init, 0k highmem)
[ 48.138717] virtual kernel memory layout:
[ 48.138718] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 48.138720] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 48.138721] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 48.138723] lowmem : 0xc0000000 - 0xdff60000 ( 511 MB)
[ 48.138724] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 48.138726] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 48.138727] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 48.138732] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 48.217511] Calibrating delay using timer specific routine.. 2992.48 BogoMIPS (lpj=5984972)
[ 48.217563] Security Framework v1.0.0 initialized
[ 48.217571] SELinux: Disabled at boot.
[ 48.217592] Mount-cache hash table entries: 512
[ 48.217753] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[ 48.217768] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 48.217771] CPU: L2 cache: 1024K
[ 48.217774] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000
[ 48.217785] Compat vDSO mapped to ffffe000.
[ 48.217790] Remapping vsyscall page to ffffe000
[ 48.217803] Checking 'hlt' instruction... OK.
[ 48.233586] SMP alternatives: switching to UP code
[ 48.233763] Freeing SMP alternatives: 11k freed
[ 48.233962] Early unpacking initramfs... done
[ 48.625124] ACPI: Core revision 20060707
[ 48.625548] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 48.630610] ACPI: setting ELCR to 0200 (from 0800)
[ 49.119938] CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05
[ 49.119945] SMP motherboard not detected.
[ 49.119948] Local APIC not detected. Using dummy APIC emulation.
[ 49.119987] Brought up 1 CPUs
[ 49.120263] Booting paravirtualized kernel on bare hardware
[ 49.120328] Time: 22:08:53 Date: 04/30/107
[ 49.120365] NET: Registered protocol family 16
[ 49.120467] EISA bus registered
[ 49.120472] ACPI: bus type pci registered
[ 49.120562] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[ 49.120565] PCI: Using configuration type 1
[ 49.120567] Setting up standard PCI resources
[ 49.133800] ACPI: Interpreter enabled
[ 49.133805] ACPI: Using PIC for interrupt routing
[ 49.134597] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 49.135206] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 49.135819] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 49.136453] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 49.137009] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 49.137562] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 49.138124] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 49.138729] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 49.139120] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 49.139126] PCI: Probing PCI hardware (bus 00)
[ 49.140700] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 49.140705] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 49.140950] Boot video device is 0000:01:00.0
[ 49.141191] PCI: Transparent bridge - 0000:00:1e.0
[ 49.141307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 49.147351] ACPI: Power Resource [PUBS] (on)
[ 49.148273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 49.148553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 49.150666] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 49.150677] pnp: PnP ACPI init
[ 49.155154] pnp: PnP ACPI: found 13 devices
[ 49.155159] PnPBIOS: Disabled by ACPI PNP
[ 49.155210] PCI: Using ACPI for IRQ routing
[ 49.155213] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 49.166365] NET: Registered protocol family 8
[ 49.166368] NET: Registered protocol family 20
[ 49.167368] PCI: Bridge: 0000:00:01.0
[ 49.167371] IO window: 3000-3fff
[ 49.167376] MEM window: c0100000-c01fffff
[ 49.167380] PREFETCH window: e0000000-e7ffffff
[ 49.167389] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[ 49.167392] IO window: 00004000-000040ff
[ 49.167397] IO window: 00004400-000044ff
[ 49.167401] PREFETCH window: e8000000-ebffffff
[ 49.167406] MEM window: c4000000-c7ffffff
[ 49.167410] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[ 49.167413] IO window: 00004800-000048ff
[ 49.167417] IO window: 00004c00-00004cff
[ 49.167421] PREFETCH window: ec000000-efffffff
[ 49.167426] MEM window: c8000000-cbffffff
[ 49.167430] PCI: Bridge: 0000:00:1e.0
[ 49.167433] IO window: 4000-8fff
[ 49.167439] MEM window: c0200000-cfffffff
[ 49.167444] PREFETCH window: e8000000-efffffff
[ 49.167460] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 49.167922] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 49.167925] PCI: setting IRQ 11 as level-triggered
[ 49.167929] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 49.168384] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 49.168386] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 49.168421] NET: Registered protocol family 2
[ 49.196387] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 49.196481] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 49.196620] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 49.196694] TCP: Hash tables configured (established 16384 bind 8192)
[ 49.196698] TCP reno registered
[ 49.208431] checking if image is initramfs... it is
[ 49.978461] Freeing initrd memory: 6966k freed
[ 49.978731] Simple Boot Flag at 0x35 set to 0x1
[ 49.978946] audit: initializing netlink socket (disabled)
[ 49.978965] audit(1180562933.564:1): initialized
[ 49.979127] VFS: Disk quotas dquot_6.5.1
[ 49.979151] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 49.979214] io scheduler noop registered
[ 49.979218] io scheduler anticipatory registered
[ 49.979220] io scheduler deadline registered
[ 49.979236] io scheduler cfq registered (default)
[ 49.979623] isapnp: Scanning for PnP cards...
[ 50.332152] isapnp: No Plug & Play device found
[ 50.367508] Real Time Clock Driver v1.12ac
[ 50.367571] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 50.368988] pnp: Device 00:0a activated.
[ 50.369177] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 50.369447] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 50.369457] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 50.369527] mice: PS/2 mouse device common for all mice
[ 50.370150] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 50.370440] input: Macintosh mouse button emulation as /class/input/input0
[ 50.370486] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 50.370490] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 50.370685] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 50.379190] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 50.379196] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 50.379344] EISA: Probing bus 0 at eisa.0
[ 50.379351] Cannot allocate resource for EISA slot 1
[ 50.379356] Cannot allocate resource for EISA slot 2
[ 50.379358] Cannot allocate resource for EISA slot 3
[ 50.379361] Cannot allocate resource for EISA slot 4
[ 50.379364] Cannot allocate resource for EISA slot 5
[ 50.379367] Cannot allocate resource for EISA slot 6
[ 50.379369] Cannot allocate resource for EISA slot 7
[ 50.379372] Cannot allocate resource for EISA slot 8
[ 50.379374] EISA: Detected 0 cards.
[ 50.409451] TCP cubic registered
[ 50.409463] NET: Registered protocol family 1
[ 50.409490] Using IPI No-Shortcut mode
[ 50.409559] ACPI: (supports S0 S3 S4 S5)
[ 50.409614] Magic number: 7:647:149
[ 50.409699] hash matches device ttyp3
[ 50.410078] Freeing unused kernel memory: 328k freed
[ 50.410820] Time: tsc clocksource has been installed.
[ 50.412693] input: AT Translated Set 2 keyboard as /class/input/input1
[ 51.629648] Capability LSM initialized
[ 51.672815] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 51.672822] ACPI: Processor [CPU] (supports 8 throttling states)
[ 51.675020] ACPI: Thermal Zone [THM0] (51 C)
[ 52.071145] usbcore: registered new interface driver usbfs
[ 52.071173] usbcore: registered new interface driver hub
[ 52.071198] usbcore: registered new device driver usb
[ 52.072885] USB Universal Host Controller Interface driver v3.0
[ 52.072947] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 52.072961] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 52.072966] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 52.073164] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 52.073190] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 52.073305] usb usb1: configuration #1 chosen from 1 choice
[ 52.073336] hub 1-0:1.0: USB hub found
[ 52.073342] hub 1-0:1.0: 2 ports detected
[ 52.171812] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 52.171817] Copyright (c) 1999-2006 Intel Corporation.
[ 52.177337] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 52.177343] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 52.177357] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 52.177361] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 52.177390] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 52.177416] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 52.177529] usb usb2: configuration #1 chosen from 1 choice
[ 52.177558] hub 2-0:1.0: USB hub found
[ 52.177566] hub 2-0:1.0: 2 ports detected
[ 52.281242] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 52.281248] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 52.281262] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 52.281266] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 52.281294] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 52.281321] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 52.281423] usb usb3: configuration #1 chosen from 1 choice
[ 52.281454] hub 3-0:1.0: USB hub found
[ 52.281462] hub 3-0:1.0: 2 ports detected
[ 52.311949] Floppy drive(s): fd0 is 1.44M
[ 52.346322] FDC 0 is a National Semiconductor PC87306
[ 3.784000] Time: acpi_pm clocksource has been installed.
[ 3.792000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 3.792000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 3.792000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.792000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.796000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 3.796000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.796000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.796000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 3.800000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.800000] usb usb4: configuration #1 chosen from 1 choice
[ 3.800000] hub 4-0:1.0: USB hub found
[ 3.800000] hub 4-0:1.0: 6 ports detected
[ 3.916000] SCSI subsystem initialized
[ 3.928000] libata version 2.20 loaded.
[ 3.932000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.932000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.932000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.932000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
[ 3.932000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
[ 3.932000] scsi0 : ata_piix
[ 4.096000] ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
[ 4.096000] ata1.00: ATA-5: HITACHI_DK23EB-40B, 00K0A0B4, max UDMA/100
[ 4.096000] ata1.00: 78140160 sectors, multi 16: LBA
[ 4.104000] ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
[ 4.104000] ata1.00: configured for UDMA/100
[ 4.104000] scsi1 : ata_piix
[ 4.312000] usb 4-3: new high speed USB device using ehci_hcd and address 2
[ 4.424000] ata2.00: ATAPI, max UDMA/33
[ 4.448000] usb 4-3: configuration #1 chosen from 1 choice
[ 4.588000] ata2.00: configured for UDMA/33
[ 4.588000] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23EB-4 00K0 PQ: 0 ANSI: 5
[ 4.588000] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R9012 1121 PQ: 0 ANSI: 5
[ 4.588000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.608000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 4.608000] sda: Write Protect is off
[ 4.608000] sda: Mode Sense: 00 3a 00 00
[ 4.608000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.608000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 4.608000] sda: Write Protect is off
[ 4.608000] sda: Mode Sense: 00 3a 00 00
[ 4.608000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.608000] sda:<6>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:b0:f5:58
[ 4.840000] usbcore: registered new interface driver libusual
[ 4.844000] sda1
[ 4.844000] sd 0:0:0:0: Attached scsi disk sda
[ 4.848000] Initializing USB Mass Storage driver...
[ 4.852000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.852000] Uniform CD-ROM driver Revision: 3.20
[ 4.852000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.856000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.856000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.876000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 5.084000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 5.256000] usb 2-2: configuration #1 chosen from 1 choice
[ 5.260000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.260000] usb-storage: device found at 2
[ 5.260000] usb-storage: waiting for device to settle before scanning
[ 5.260000] usbcore: registered new interface driver usb-storage
[ 5.260000] USB Mass Storage support registered.
[ 5.276000] usbcore: registered new interface driver hiddev
[ 5.296000] input: Device USB Device as /class/input/input2
[ 5.296000] input: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:1d.1-2
[ 5.324000] input: Device USB Device as /class/input/input3
[ 5.324000] input: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:1d.1-2
[ 5.324000] usbcore: registered new interface driver usbhid
[ 5.324000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 10.260000] usb-storage: device scan complete
[ 10.260000] scsi 2:0:0:0: Direct-Access USB DISK 28X PMAP PQ: 0 ANSI: 0 CCS
[ 10.260000] SCSI device sdb: 2015232 512-byte hdwr sectors (1032 MB)
[ 10.260000] sdb: Write Protect is off
[ 10.260000] sdb: Mode Sense: 23 00 00 00
[ 10.260000] sdb: assuming drive cache: write through
[ 10.264000] SCSI device sdb: 2015232 512-byte hdwr sectors (1032 MB)
[ 10.264000] sdb: Write Protect is off
[ 10.264000] sdb: Mode Sense: 23 00 00 00
[ 10.264000] sdb: assuming drive cache: write through
[ 10.264000] sdb: sdb1
[ 10.264000] sd 2:0:0:0: Attached scsi removable disk sdb
[ 10.264000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 17.640000] end_request: I/O error, dev fd0, sector 0
[ 30.704000] end_request: I/O error, dev fd0, sector 0
[ 30.704000] Buffer I/O error on device fd0, logical block 0
[ 43.768000] end_request: I/O error, dev fd0, sector 0
[ 43.768000] Buffer I/O error on device fd0, logical block 0
[ 57.848000] end_request: I/O error, dev fd0, sector 0
[ 70.912000] end_request: I/O error, dev fd0, sector 0
[ 70.912000] Buffer I/O error on device fd0, logical block 0
[ 83.976000] end_request: I/O error, dev fd0, sector 0
[ 83.976000] Buffer I/O error on device fd0, logical block 0
[ 87.496000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 87.572000] ISO 9660 Extensions: RRIP_1991A
[ 87.624000] Registering unionfs 20060916-2203
[ 87.624000] unionfs: debugging is not enabled
[ 87.636000] loop: loaded (max 8 devices)
[ 87.744000] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 198.748000] iTCO_vendor_support: vendor-support=0
[ 200.644000] irda_init()
[ 200.644000] NET: Registered protocol family 23
[ 201.832000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 202.108000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 202.108000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 202.108000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 202.132000] input: PC Speaker as /class/input/input4
[ 202.652000] Linux agpgart interface v0.102 (c) Dave Jones
[ 202.732000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 202.732000] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 202.772000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 202.856000] pnp: Device 00:0c activated.
[ 202.856000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 202.856000] nsc-ircc, chip->init
[ 202.856000] nsc-ircc, Found chip at base=0x02e
[ 202.856000] nsc-ircc, driver loaded (Dag Brattli)
[ 202.856000] IrDA: Registered device irda0
[ 202.856000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 203.656000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 203.764000] intel_rng: FWH not detected
[ 203.912000] parport: PnPBIOS parport detected.
[ 203.912000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 203.964000] parport0: Printer, HEWLETT-PACKARD DESKJET 895C
[ 204.268000] agpgart: Detected an Intel 855PM Chipset.
[ 204.328000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 205.324000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
[ 205.324000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 205.324000] Yenta: Routing CardBus interrupts to PCI
[ 205.324000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[ 205.408000] NET: Registered protocol family 17
[ 205.556000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
[ 205.556000] Socket status: 30000006
[ 205.556000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 205.556000] cs: IO port probe 0x4000-0x8fff: clean.
[ 205.556000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 205.556000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 205.556000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
[ 205.556000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 205.556000] Yenta: Routing CardBus interrupts to PCI
[ 205.556000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
[ 205.664000] airo(): Probing for PCI adapters
[ 205.788000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
[ 205.788000] Socket status: 30000006
[ 205.788000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 205.788000] cs: IO port probe 0x4000-0x8fff: clean.
[ 205.788000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 205.788000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 205.804000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 205.804000] airo(eth1): Found an MPI350 card
[ 206.956000] cs: IO port probe 0x100-0x3af: clean.
[ 206.960000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 206.960000] cs: IO port probe 0x820-0x8ff: clean.
[ 206.960000] cs: IO port probe 0xc00-0xcf7: clean.
[ 206.960000] cs: IO port probe 0xa00-0xaff: clean.
[ 206.960000] cs: IO port probe 0x100-0x3af: clean.
[ 206.960000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 206.964000] cs: IO port probe 0x820-0x8ff: clean.
[ 206.964000] cs: IO port probe 0xc00-0xcf7: clean.
[ 206.964000] cs: IO port probe 0xa00-0xaff: clean.
[ 207.104000] airo(eth1): WPA is supported.
[ 207.104000] airo(eth1): MAC enabled 0:2:8a:f3:94:2b
[ 207.104000] airo(): Finished probing for PCI adapters
[ 207.108000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 207.108000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 207.808000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 207.928000] intel8x0_measure_ac97_clock: measured 55451 usecs
[ 207.928000] intel8x0: clocking to 48000
[ 208.060000] input: TPPS/2 IBM TrackPoint as /class/input/input6
[ 209.504000] fuse init (API version 7.8)
[ 217.676000] ACPI: AC Adapter [AC] (on-line)
[ 217.896000] ACPI: Battery Slot [BAT0] (battery present)
[ 217.964000] input: Power Button (FF) as /class/input/input7
[ 217.968000] ACPI: Power Button (FF) [PWRF]
[ 218.016000] input: Lid Switch as /class/input/input8
[ 218.020000] ACPI: Lid Switch [LID]
[ 218.068000] input: Sleep Button (CM) as /class/input/input9
[ 218.072000] ACPI: Sleep Button (CM) [SLPB]
[ 218.140000] ACPI: ACPI Dock Station Driver
[ 218.164000] Using specific hotkey driver
[ 218.316000] ibm_acpi: ThinkPad EC firmware 1RHT71WW-3.04
[ 218.320000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13
[ 218.320000] ibm_acpi: http://ibm-acpi.sf.net/
[ 218.412000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 218.552000] pcc_acpi: loading...
[ 243.796000] lp0: using parport0 (interrupt-driven).
[ 243.952000] [drm] Initialized drm 1.1.0 20060810
[ 244.136000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 244.136000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 244.304000] ppdev: user-space parallel port driver
[ 247.588000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 247.588000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 247.588000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 248.796000] NET: Registered protocol family 10
[ 248.796000] lo: Disabled Privacy Extensions
[ 248.796000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 249.660000] [drm] Setting GART location based on new memory map
[ 249.660000] [drm] writeback test succeeded in 2 usecs
[ 259.692000] eth1: no IPv6 routers present
[ 264.108000] IBM machine detected. Enabling interrupts during APM calls.
[ 264.108000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 264.108000] apm: overridden by ACPI.
[ 265.460000] Non-volatile memory driver v1.2
[ 265.484000] input: /usr/sbin/thinkpad-keys as /class/input/input10
[ 266.412000] Bluetooth: Core ver 2.11
[ 266.412000] NET: Registered protocol family 31
[ 266.412000] Bluetooth: HCI device and connection manager initialized
[ 266.412000] Bluetooth: HCI socket layer initialized
[ 267.180000] Bluetooth: L2CAP ver 2.8
[ 267.180000] Bluetooth: L2CAP socket layer initialized
[ 267.540000] Bluetooth: RFCOMM socket layer initialized
[ 267.540000] Bluetooth: RFCOMM TTY layer initialized
[ 267.540000] Bluetooth: RFCOMM ver 1.8
[ 881.844000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 881.848000] NTFS-fs warning (device sda1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
[ 882.268000] NTFS volume version 3.1.
