LINUXANT PEOPLE: something for you well marked below.
Nick,
Was it such a log from wvdial which lead you to state that you cannot
use V.92? The log shows the speed, 29333 bauds, not the protocole under
which this speed was achieved.
I have an other model of HSF modem on my laptop. It does work at close
to 50kbauds,never 56k, and advertising always says "UP TO 56k", on the
average 48, with good phone lines, but it often drops down to even less
than yours for example in country hotels far from a major city.
Now to what is likely the cause of your trouble.
Guess why these idiots keep repeating that we NEED ModemData.txt when
trying to help you.
A lot of time could have been saved, to you and to me.
You use a kernel 2.6.21
Linuxant does not provide any off the shelf HSF installer for Gentoo,
which by the way is why you had to compile your driver.
But from their Web page referenced in ModemData.txt,
http://www.linuxant.com/drivers , in the HSF region, under Downloads,
you may see that there is not one single installer for kernels above 2.6.20.
From there on, you should talk to support@xxxxxxxxxxxx
Perhaps they have not tried their most recent driver with that kernel,
or perhaps they know that it does not work sufficiently well to warrant
creating the set of self installers.
LINUXANT PEOPLE: (Jonathan, I guess):
This tedious thread started because Nick purchased a modem using
chipset CX11252-11 with a Linuxant license, PCI Device 14f1:2f00 , and
asked who knows why he is limited to V.34.
The rest is obvious from what I wrote above.
Please comment!
Thanks in advance - Jacques
nick01 X wrote:
Ok, sorry, must have missed your request to post that somehow. :S
ModemData.txt:
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List
Server.
Do use the following as the email Subject Line:
SomeName, YourCountry
This is kernel 2.6.21-gentoo-r2
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org .
Local Linux experts can be found through:
http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686,
This is
Linux version 2.6.21-gentoo-r2 (root@T72) (gcc version 4.1.2 (Gentoo
4.1.2)) #1 PREEMPT Mon May 28 14:46:13 EEST 2007
scanModem update of: 2007_April_23
The modem symbolic link is /dev/modem -> ttySHSF0
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:02.0 14f1:2f00 14f1:2004 Communication controller: Conexant HSF
56k HSFi Modem
Modem interrupt assignment and sharing:
11: 739658 XT-PIC-XT hsfpcibasic2
--- Bootup diagnositcs for card in PCI slot 02:02.0 ----
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKH] -> GSI 11 (level,
low) -> IRQ 11
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 02:02.0
Class 0780: 14f1:2f00 Communication controller: Conexant HSF 56k HSFi
Modem
Primary PCI_id 14f1:2f00
Support type needed or chipset: hsfmodem
Formal support for Conexant chipset modems are available ONLY through
http://www.linuxant.com/drivers. Read Conexant.txt for details.
and Modem/YourSystem.txt for follow through guidance. Driver speed
is limited to
14,400 until a key is purchased. There is NO freeware alternative.
There are two support package types: hsfmodem and hcflinmodem.
http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
problem and solution in stalling a key, after testing of the free low
speed download.
The hsfmodem package serves a great variety of Conexant chipset modems.
Start at http://www.linuxant.com/drivers/hsf for
eventually download of a hsfmodem-SomeVersion.zip package with
SomeVersion containing your kernel_version 2.6.21-gentoo-r2 in the
filename if possible.
These packages have compiled drivers. Otherwise download the generic
hsfmodem-Version.tar.gz package. Its usage will require compiling.
Read Conexant.txt
Writing Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
kernel_headers base folder /lib/modules/2.6.21-gentoo-r2/build
Checking pppd properties:
-r-s--x--x 1 root root 249324 2007-05-29 14:12 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 8
2007-05-29 15:36 /dev/modem -> ttySHSF0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem",
GROUP="dialout"
/etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem"
Within /etc/modprobe.conf files:
alias /dev/modem /dev/ttySHSF
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules.conf:alias /dev/modem /dev/ttySHSF
/etc/modules.d/hsf:alias /dev/modem /dev/ttySHSF
--------- end modem support lines --------
Output of dialing with wvdial:
nick01@T72 ~ $ wvdial pulse
WvDial<*1>: WvDial: Internet dialer version 1.56
WvDial<*1>: Initializing modem.
WvDial<*1>: Sending: ATZ
WvDial Modem<*1>: ATZ
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 W2 +FCLASS=0
WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 W2 +FCLASS=0
WvDial Modem<*1>: OK
WvDial<*1>: Modem initialized.
WvDial<*1>: Sending: ATDP0870222222
WvDial<*1>: Waiting for carrier.
WvDial Modem<*1>: ATDP0870222222
WvDial Modem<*1>: CONNECT 29333
WvDial<*1>: Carrier detected. Waiting for prompt.
WvDial Modem<*1>: ~[7f]}#@!}!=} }9}"}&} }*} }
}#}%B#}%}%}&[05]qZ[1e]}'}"}(}"I1~~[7f]}#@!}!>} }9}"}&} }*} }
}#}%B#}%}%}&[05]qZ[1e]}'}"}(}"[05]\~~[7f]}#@!}!?} }9}"}&} }*} }
}#}%B#}%}%}&[05]qZ[1e]}'}"}(}"A}'~~[7f]}#@!}!@} }9}"}&} }*} }
}#}%B#}%}%}&[05]qZ[1e]}'}"}(}"V ~~[7f]}#@!}!A} }9}"}&} }*} }
}#}%B#}%}%}&[05]qZ[1e]}'}"}(}"}2R~~[7f]}#@!}!B} }9}"}&} }*} }
}#}%B#}%}%}&[05]qZ[1e]}'}"}(}"^?~
WvDial<*1>: PPP negotiation detected.
WvDial<Notice>: Starting pppd at Tue May 29 15:37:48 2007
WvDial<Notice>: Pid of pppd: 16263
WvDial<*1>: Using interface ppp0
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: local IP address 86.34.73.49
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: remote IP address 86.34.90.2
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: primary DNS address 193.231.100.134
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
WvDial<*1>: secondary DNS address 193.231.100.130
WvDial<*1>: pppd: Ȭ[06][08]��[06][08]
I haven't yet tried this modem in windows but I can connect with
another V.90 modem at 48000; I'll have to put it in another windows pc
and see. I'll post the results.
