Jacques, I used Hyperterminal and got this response to AT then ATI8 ..... Si3035 (USA Only) Jim -----Original Message----- From: Jacques Goldberg [mailto:Jacques.Goldberg@xxxxxxx] Sent: Monday, May 21, 2007 3:41 AM To: Firas Kraiem Cc: discuss@xxxxxxxxxxxxx; ash@xxxxxxxxxxxxxxxxxxxxxxxxx Subject: Re: Modem Driver Help Jim, What Firas writes is unfortunately true but still, hoping that you also have Windows on the same machine, could you please use Hyperterminal to get the modem's response to command ATI8 (that is ATi8 , not number 18)? If you are not familiar with Hyperterminal, you will find help here: http://www.eicon.com/support/helpweb/divaclient/dc28.htm You try ATI8 right after trying AT and getting OK in section 4 of this guide. Jacques Firas Kraiem wrote: > Jim > > Sorry to bring bad news but : > >> For candidate modem in PCI bus: 02:08.0 >> Class 0703: 14e4:4212 Modem: Broadcom Corporation BCM4212 v.90 56k modem >> Primary PCI_id 14e4:4212 >> Support type needed or chipset: Broadcom >> Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . Read >> InfoGeneral.txt about alternatives. > > Firas > > On Monday 21 May 2007 00:52:32 James Holsenback wrote: >> Hello, >> >> I would appreciate any help you could offer in obtaining drivers for my BCM >> V92 .... I believe I have BCM4212 chipset as I've downloaded and run >> scanModem and that's about as far as I'm comfortable with doing. Attached >> is ModemData.txt ..... I sure would appreciate pointers to get the rest of >> the process underway .... My OS is Ubuntu 7.04 >> >> Thanks Jim
