Ahah!
Si3035 is a Silicon Labs AMR (Riser) chip which interfaces with the
AC'97 bus. Silicon Labs chips are used by Smartlink Riser modems. The
complete Smartlink driver slmodem (lower case, NOT with a trailing d) is
quite possibly going to serve your chip. Not guaranteed and harmless to try.
Open http://linmodems.technion.ac.il/packages/smartlink
Download the file slmodem-2.9.11-20070505.tar.gz to your Linux system.
Open it with command tar zxf slmodem-2.9.11-20070505.tar.gz
which will create a subdirectory slmodem-2.9.11-20070505
Enter it with cd slmodem-2.9.11-20070505
Read the instructions (README and the two .txt files.
You will need to compile the driver.
If you get an error about missing sources, read CompilingDriver.txt
in the Modem subdirectory where you found ModemData.txt created by
scanModem.
AND PLEASE LET US KNOW, IF YOU FAIL AS WELL AS IF YOU SUCCEED.
WE NEED YOUR RESPONSE,
Jacques
James Holsenback wrote:
Jacques,
I used Hyperterminal and got this response to AT then ATI8 .....
Si3035 (USA Only)
Jim
-----Original Message-----
From: Jacques Goldberg [mailto:Jacques.Goldberg@xxxxxxx]
Sent: Monday, May 21, 2007 3:41 AM
To: Firas Kraiem
Cc: discuss@xxxxxxxxxxxxx; ash@xxxxxxxxxxxxxxxxxxxxxxxxx
Subject: Re: Modem Driver Help
Jim,
What Firas writes is unfortunately true but still, hoping that you also
have Windows on the same machine, could you please use Hyperterminal to
get the modem's response to command ATI8 (that is ATi8 , not number 18)?
If you are not familiar with Hyperterminal, you will find help here:
http://www.eicon.com/support/helpweb/divaclient/dc28.htm
You try ATI8 right after trying AT and getting OK in section 4 of this
guide.
Jacques
Firas Kraiem wrote:
Jim
Sorry to bring bad news but :
For candidate modem in PCI bus: 02:08.0
Class 0703: 14e4:4212 Modem: Broadcom Corporation BCM4212 v.90 56k
modem
Primary PCI_id 14e4:4212
Support type needed or chipset: Broadcom
Under Linux 2.6.n kernels, the chipset is NOT SUPPORTED . Read
InfoGeneral.txt about alternatives.
Firas
On Monday 21 May 2007 00:52:32 James Holsenback wrote:
Hello,
I would appreciate any help you could offer in obtaining drivers for my
BCM
V92 .... I believe I have BCM4212 chipset as I've downloaded and run
scanModem and that's about as far as I'm comfortable with doing. Attached
is ModemData.txt ..... I sure would appreciate pointers to get the rest
of
the process underway .... My OS is Ubuntu 7.04
Thanks Jim
