anyone understand my problem...........
regards.
On 12/27/06, Raheel Kaghzi <raheelkaghzi@xxxxxxxxx> wrote:
> hello every one,
> here is the updates of driver i got from intel web.
> marvin i am waiting for your reply.....!!!!!!!!!1
> when i run the
> #dmesg
> here is the result....
> ---
> 6e90
> ACPI: SSDT (v001 INTEL CpuPm 0x00000dc8 MSFT 0x01000013) @ 0x3f6fdc10
> ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000dc8 MSFT 0x01000013) @ 0x3f6fda10
> ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000dc8 MSFT 0x01000013) @ 0x3f6fd810
> ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000dc8 MSFT 0x01000013) @ 0x3f6fd610
> ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000dc8 MSFT 0x01000013) @ 0x3f6fd410
> ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x3f6e3d90
> ACPI: DSDT (v001 INTEL D945GNT 0x00000dc8 MSFT 0x01000013) @ 0x00000000
> ACPI: PM-Timer IO Port: 0x408
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Built 1 zonelists
> Kernel command line: ro root=LABEL=/ rhgb quiet
> Initializing CPU#0
> CPU 0 irqstacks, hard=c03d3000 soft=c03d2000
> PID hash table entries: 4096 (order: 12, 65536 bytes)
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 1025380k/1039360k available (2055k kernel code, 12716k
> reserved, 655k data, 140k init, 121332k highmem)
> Using HPET for base-timer
> Using HPET for gettimeofday
> Detected 3000.435 MHz processor.
> Using hpet for high-res timesource
> Calibrating delay loop... 5947.39 BogoMIPS (lpj=2973696)
> Security Scaffold v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> There is already a security framework initialized, register_security
failed.
> selinux_register_security: Registering secondary module
capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
> CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
> monitor/mwait feature present.
> using mwait in idle threads.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 2048K
> CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000080
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
> CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> ACPI: IRQ9 SCI: Level Trigger.
> checking if image is initramfs... it is
> Freeing initrd memory: 384k freed
> NET: Registered protocol family 16
> PCI: Using MMCONFIG
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040816
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00: 1f.2
> PCI: Unable to handle 64-bit address space for
> PCI: Unable to handle 64-bit address space for
> PCI: Unable to handle 64-bit address space for
> PCI: Unable to handle 64-bit address space for
> PCI: Unable to handle 64-bit address space for
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
> Linux Plug and Play Support v0.97 (c) Adam Belay
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:1c.2[C] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:1c.3[D] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:1c.4[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:1c.5[B] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
> ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00: 1d.2[C] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI interrupt 0000:00: 1f.2[B] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:06: 00.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:06:05.0[A] -> GSI 11 (level, low) -> IRQ 11
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> apm: overridden by ACPI.
> audit: initializing netlink socket (disabled)
> audit(1167256564.398:0): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key E07BC3E85BE30CFD
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> vesafb: probe of vesafb0 failed with error -6
> ACPI: Processor [CPU0] (supports C1)
> Real Time Clock Driver v1.12
> Linux agpgart interface v0.100 (c) Dave Jones
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> divert: not allocating divert_blk for non-ethernet device lo
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
> Probing IDE interface ide0...
> hda: ST380817AS, ATA DISK drive
> Probing IDE interface ide1...
> hdc: ST380011A, ATA DISK drive
> hdd: DVDRW IDE 16X, ATAPI CD/DVD-ROM drive
> Probing IDE interface ide2...
> ide2: Wait for ready failed before probe !
> Probing IDE interface ide3...
> ide3: Wait for ready failed before probe !
> Probing IDE interface ide4...
> ide4: Wait for ready failed before probe !
> Probing IDE interface ide5...
> ide5: Wait for ready failed before probe !
> Using cfq io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 1024KiB
> hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
> hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
> hdc: max request size: 1024KiB
> hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
> hdc: cache flushes supported
> hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 >
> hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard on isa0060/serio0
> input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> NET: Registered protocol family 2
> IP: routing cache hash table of 2048 buckets, 64Kbytes
> TCP: Hash tables configured (established 262144 bind 37449)
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> cpufreq: CPU0 - ACPI performance management activated.
> cpufreq: *P0: 3000 MHz, 89000 mW, 160 uS
> cpufreq: P1: 2800 MHz, 85974 mW, 160 uS
> ACPI: (supports S0 S1 S3 S4 S5)
> ACPI wakeup devices:
> SLPB P32 UAR1 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 UHC1 UHC2 UHC3 UHC4 EHCI AC9M
AZAL
> Freeing unused kernel memory: 140k freed
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> security: 3 users, 4 roles, 316 types, 20 bools
> security: 53 classes, 9815 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev hda3, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), not configured for
labeling
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured
> for labeling
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev eventpollfs, type eventpollfs), uses
genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> inserting floppy driver for 2.6.9-5.EL
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> Intel(R) PRO/1000 Network Driver - version 6.0.54-NAPI
> Copyright (c) 1999-2005 Intel Corporation.
> ACPI: PCI interrupt 0000:01: 00.0[A] -> GSI 11 (level, low) -> IRQ 11
> PCI: Setting latency timer of device 0000:01:00.0 to 64
> divert: allocating divert_blk for eth0
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> ACPI: PCI interrupt 0000:00: 1b.0[A] -> GSI 11 (level, low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 10 (level, low) -> IRQ 10
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: irq 10, pci mem f8828400
> SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: irq 10, io base 00003080
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
> uhci_hcd 0000:00: 1d.1: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: irq 11, io base 00003060
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> hub 3-0:1.0 : USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00: 1d.2 to 64
> uhci_hcd 0000:00:1d.2: irq 11, io base 00003040
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00: 1d.3[D] -> GSI 11 (level, low) -> IRQ 11
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: irq 11, io base 00003020
> uhci_hcd 0000:00: 1d.3: new USB bus registered, assigned bus number 5
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> usb 3-2: new full speed USB device using address 2
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> EXT3 FS on hda3, internal journal
> device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
> hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: command error: error=0x54
> ide: failed opcode was 100
> ATAPI device hdd:
> Error: Illegal request -- (Sense key=0x05)
> (reserved error code) -- (asc=0x64, ascq=0x03)
> The failed "Read 10" packet command was:
> "28 00 00 05 56 a0 00 00 02 00 00 00 00 00 00 00 "
> end_request: I/O error, dev hdd, sector 1399424
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev hda1, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev hda5, type ext3), uses xattr
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda7, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev hda7, type ext3), uses xattr
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda8, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev hda8, type ext3), uses xattr
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda6, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev hda6, type ext3), uses xattr
> SELinux: initialized (dev hda10, type vfat), uses genfs_contexts
> Adding 2104472k swap on /dev/hda9. Priority:-1 extents:1
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport0: irq 7 detected
> ip_tables: (C) 2000-2002 Netfilter core team
> ip_conntrack version 2.1 (8120 buckets, 64960 max) - 356 bytes per
conntrack
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses
genfs_contexts
> i2c /dev entries driver
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport0: irq 7 detected
> lp0: using parport0 (polling).
> lp0: console ready
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c0366c20(lo)
> IPv6 over IPv4 tunneling driver
> divert: not allocating divert_blk for non-ethernet device sit0
> Intel537: no version for "struct_module" found: kernel tainted.
> Intel537: no version magic, tainting kernel.
> Intel537: module license 'Proprietary' taints kernel.
> sound disabled
> Intel 537 card found
> This Intel(R) 537EP Modem driver won't install on Intel 537 card,
> please download the right driver
> eth0: no IPv6 routers present
> mtrr: no more MTRRs available
> ---
> regards.
>
> On 12/25/06, Raheel Kaghzi <raheelkaghzi@xxxxxxxxx> wrote:
> > hello everyone,
> > marvin i have tried to installed the new driver from intel the weblink
> > u sent to me,
> >
http://downloadfinder.intel.com/scripts-df-external/filter_results.aspx?strTypes=all&ProductID=1230&OSFullName=Red+Hat*+Linux+9.0&lang=eng&strOSs=89&submit=Go%21
> > now here are the details of this drivers.........
> > now see and tell me, my hardware configurator show the tigerJet modem
> > in the list....
> > looking forward to u.
> > regards.
> > ===
> > [root@myhost intel-537EP_secure-2.6]# make clean
> > cd coredrv; make clean
> > make[1]: Entering directory `/root/intel-537EP_secure-2.6/coredrv'
> > rm -f *.ko *.o *~ core
> > make[1]: Leaving directory `/root/intel-537EP_secure-2.6/coredrv'
> > rm -f *.o *.ko
> > [root@myhost intel-537EP_secure-2.6]# make 537
> > Module precompile check
> > Current running kernel is: 2.6.9-5.EL
> > /lib/modules... autoconf.h exists
> > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > autoconf.h matches running kernel
> > diff: /boot/vmlinuz.version.h: No such file or directory
> > version.h matches running kernel
> > 2.6.9-5.EL
> > make[1]: Entering directory `/root/intel-537EP_secure- 2.6/coredrv'
> > make -C /lib/modules/2.6.9-5.EL/build
> > SUBDIRS=/root/intel-537EP_secure-2.6/coredrv modules
> > make[2]: Entering directory `/usr/src/kernels/2.6.9-5.EL-i686'
> > CC [M] /root/intel-537EP_secure- 2.6/coredrv/coredrv.o
> > /root/intel-537EP_secure-2.6/coredrv/coredrv.c: In function
> > `softcore_init_struct':
> > /root/intel-537EP_secure-2.6/coredrv/coredrv.c:336: warning:
> > assignment from incompatible pointer type
> > /root/intel-537EP_secure-2.6/coredrv/coredrv.c: At top level:
> > /root/intel-537EP_secure-2.6/coredrv/coredrv.c:641: warning:
> > `MODULE_PARM_' is deprecated (declared at include/linux/module.h:552)
> > /root/intel-537EP_secure-2.6/coredrv/coredrv.c:754: warning:
> > initialization from incompatible pointer type
> > /root/intel-537EP_secure-2.6/coredrv/coredrv.c:755: warning:
> > initialization from incompatible pointer type
> > /root/intel-537EP_secure-2.6/coredrv/coredrv.c: In function
> >
`dspdrv_CommRamISR':/root/intel-537EP_secure-2.6/coredrv/coredrv.c:877:
> > warning: function declaration isn't a prototype
> > CC [M] /root/intel-537EP_secure- 2.6/coredrv/clmmain.o
> > CC [M] /root/intel-537EP_secure-2.6/coredrv/rts.o
> > /root/intel-537EP_secure-2.6/coredrv/rts.c: In function `RTS_Enable':
> > /root/intel-537EP_secure-2.6/coredrv/rts.c:118: warning: assignment
> > from incompatible pointer type
> > CC [M] /root/intel-537EP_secure-2.6/coredrv/task.o
> > /root/intel-537EP_secure-2.6/coredrv/task.c: In function `RSATaskYield':
> > /root/intel-537EP_secure-2.6 /coredrv/task.c:144: warning:
> > `interruptible_sleep_on' is deprecated (declared at
> > include/linux/wait.h:290)
> > CC [M] /root/intel-537EP_secure-2.6/coredrv/uart.o
> > /root/intel-537EP_secure- 2.6/coredrv/uart.c: In function
`UART_msr_wait':
> > /root/intel-537EP_secure-2.6/coredrv/uart.c:94: warning:
> > `interruptible_sleep_on' is deprecated (declared at
> > include/linux/wait.h:290)
> > CC [M] /root/intel-537EP_secure- 2.6/coredrv/wwh_dflt.o
> > CC [M] /root/intel-537EP_secure-2.6/coredrv/locks.o
> > CC [M] /root/intel-537EP_secure-2.6/coredrv/softserial_io.o
> > CC [M] /root/intel-537EP_secure-2.6/coredrv/softserial_ioctl.o
> > CC [M] /root/intel-537EP_secure-2.6/coredrv/softserial.o
> > CC [M] /root/intel-537EP_secure-2.6/coredrv/afedsp_int.o
> > /root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:48: warning:
> > function declaration isn't a prototype
> > /root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:61: warning:
> > initialization from incompatible pointer type
> > /root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:65: warning:
> > function declaration isn't a prototype
> > /root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:113: warning:
> > conflicting types for built-in function 'malloc'
> > /root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:454: warning:
> > initialization from incompatible pointer type
> > LD [M] /root/intel-537EP_secure-2.6/coredrv/Intel537.o
> > Building modules, stage 2.
> > MODPOST
> > CC
/root/intel-537EP_secure-2.6/coredrv/Intel537.mod.o
> > LD [M] /root/intel-537EP_secure- 2.6/coredrv/Intel537.ko
> > make[2]: Leaving directory `/usr/src/kernels/2.6.9-5.EL-i686'
> > make[1]: Leaving directory `/root/intel-537EP_secure-2.6/coredrv'
> > [root@myhost intel-537EP_secure-2.6]# make install
> > rm -f /etc/hamregistry.bin
> > bash 537_inst
> > running kernel 2.6.9-5.EL
> > installing hamregistry, used for persistant storage
> > installing usrsound, a soft buzzer
> > installing 537 module
> > redhat 537_boot rc2.d, rc3.d and rc5.d scripts
> > starting module and utilities
> > error loading Intel537
> > ERROR: Module Intel537 does not exist in /proc/modules
> > done
> > [root@myhost intel-537EP_secure-2.6]#
> > ===
> > looking forwar to u.
> >
> >
> > On 12/24/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> > > Raheel,
> > >
> > > The compile is now proceeding, but there is some problem with your
> > > particular kernel. I am leaving on 2 weeks travel tomorrow. Note that
> > >
> >
http://downloadfinder.intel.com/scripts-df-external/filter_results.aspx?strTypes=all&ProductID=1230&OSFullName=Red+Hat*+Linux+9.0&lang=eng&strOSs=89&submit=Go%21
> > > has drivers that may match your kernel. Blann can likely help with
> > > later issues if you get a functional driver. Do copy messages to the
> > > List for broader help.
> > >
> > > MarvS
> > >
> > > On 12/23/06, Raheel Kaghzi < raheelkaghzi@xxxxxxxxx> wrote:
> > > > here are the details of new driver....18 dec 2006.
> > > > looking forward to u.
> > > > ----
> > > > [root@myhost intel-537EP_secure- 2.60.80.1]# ls
> > > > 537_boot config_check hamregistry makefile
usrsound
> > > > 537_inst coredrv license.txt readme.txt
> > > > [root@myhost intel-537EP_secure- 2.60.80.1]# make clean
> > > > cd coredrv; make clean
> > > > make[1]: Entering directory
`/root/intel-537EP_secure-2.60.80.1/coredrv'
> > > > rm -f *.ko *.o .*.o.cmd *.mod.c *~ core .*.ko.cmd Modules.symvers
> > > > rm -rf .tmp_versions
> > > > make[1]: Leaving directory
`/root/intel-537EP_secure-2.60.80.1/coredrv'
> > > > rm -f *.o *.ko
> > > > [root@myhost intel-537EP_secure-2.60.80.1]# export MODEM_TYPE=537
> > > > [root@myhost intel-537EP_secure-2.60.80.1]# make 537
> > > > Module precompile check
> > > > Current running kernel is: 2.6.9-5.EL
> > > > /lib/modules... autoconf.h exists
> > > > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > > > autoconf.h matches running kernel
> > > > diff: /boot/vmlinuz.version.h: No such file or directory
> > > > version.h matches running kernel
> > > > 2.6.9-5.EL
> > > > make[1]: Entering directory `/root/intel-537EP_secure-
2.60.80.1/coredrv'
> > > > make -C /lib/modules/2.6.9-5.EL/build
> > > > SUBDIRS=/root/intel-537EP_secure-2.60.80.1/coredrv
modules
> > > > make[2]: Entering directory `/usr/src/kernels/2.6.9-5.EL-i686'
> > > > CC [M] /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c: In function
> > > > `send_data_to_user':
> > > > /root/intel-537EP_secure- 2.60.80.1/coredrv/coredrv.c:625: error:
> > > > subscripted value is neither array nor pointer
> > > > /root/intel-537EP_secure- 2.60.80.1/coredrv/coredrv.c: At top level:
> > > > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:707: warning:
> > > > `MODULE_PARM_' is deprecated (declared at
include/linux/module.h:552)
> > > > make[3]: *** [/root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o]
> > Error
> > > 1
> > > > make[2]: *** [_module_/root/intel-537EP_secure-
2.60.80.1/coredrv] Error
> > 2
> > > > make[2]: Leaving directory `/usr/src/kernels/2.6.9-5.EL-i686'
> > > > make[1]: *** [537core_26] Error 2
> > > > make[1]: Leaving directory `/root/intel-537EP_secure-
2.60.80.1/coredrv'
> > > > 2.6.9-5.EL
> > > > Failed to build driver
> > > > [root@myhost intel-537EP_secure-2.60.80.1 ]#
> > > > regards.
> > > > -----
> > > >
> > > > On 12/24/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> > > > > Raheel,
> > > > >
> > > > > You should try the
> > > > > intel-537EP_secure-2.60.80.1_18_12_2006.tgz 18-Dec-2006 14:17
1.5M
> > > > > at
> > >
http://phep2.technion.ac.il/linmodems/packages/Intel/Philippe.Vouters/
> > > > >
> > > > > Something is broken in your copy of the intel-537-2.27.39.0 code
> > > package,
> > > > > because the script is just being displayed rather than executed.
> > > > >
> > > > > It should look like:
> > > > > $ make clean
> > > > > cd coredrv; make clean
> > > > > make[1]: Entering directory
> > > > > `/usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv'
> > > > > rm -f *.ko *.o .*.o.cmd *.mod.c *~ core .*.ko.cmd Modules.symvers
> > > > > rm -rf .tmp_versions
> > > > > make[1]: Leaving directory
> > > > >
`/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > > > rm -f *.o *.ko
> > > > >
> > > > > $ export MODEM_TYPE=537EP
> > > > >
> > > > > $ make 537
> > > > > Module precompile check
> > > > > Current running kernel is: 2.6.17.14-marv3
> > > > > /lib/modules... autoconf.h exists
> > > > > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > > > > autoconf.h matches running kernel
> > > > > diff: /boot/vmlinuz.version.h: No such file or directory
> > > > > version.h matches running kernel
> > > > > 2.6.17.14-marv3
> > > > > make[1]: Entering directory
> > > > > `/usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv'
> > > > > make -C /lib/modules/2.6.17.14-marv3/build
> > > > >
SUBDIRS=/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv
modules
> > > > > make[2]: Entering directory `/usr/src/linux-source-2.6.17'
> > > > > CC [M]
> > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > > > CC [M]
> > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/clmmain.o
> > > > > CC [M] /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/rts.o
> > > > > CC [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/task.o
> > > > > CC [M] /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/uart.o
> > > > > CC [M]
> > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/wwh_dflt.o
> > > > > CC [M]
> >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/locks.o
> > > > > CC [M]
> > > > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/softserial_io.o
> > > > > CC [M]
> > > > >
> > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/softserial_ioctl.o
> > > > > CC [M]
> > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial.o
> > > > > CC [M]
> > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/afedsp_int.o
> > > > > LD [M]
> > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/Intel537.o
> > > > > Building modules, stage 2.
> > > > > MODPOST
> > > > > WARNING: could not find
> > > > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/.537core.lib.cmd
> > > > > for
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/537core.lib
> > > > > CC
> > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.mod.o
> > > > > LD [M]
> > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/Intel537.ko
> > > > > make[2]: Leaving directory `/usr/src/linux-source-2.6.17'
> > > > > make[1]: Leaving directory
> > > > > `/usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv'
> > > > >
> > > > > The product is:
> > > > > $ ls -l *.ko
> > > > > -rw-r--r-- 1 marv marv 4217168 2006-12-23 14:54 Intel537.ko
> > > > >
> > > > >
> > > > >
> > > > > On 12/23/06, Raheel Kaghzi <raheelkaghzi@xxxxxxxxx> wrote:
> > > > > > hello everybody,
> > > > > > i was waiting for your help from last one month,but unable to
> > > > > > succeeded with the modem intel 537EP driver installation,
> > > > > > i have RHEL4,kernel 2.6.9-5EL ,i have tested all the drivers i
ahve
> > > > > > from linmodem and amigo website gave me and the intel drivers.
> > > > > > facing problems.
> > > > > > erorrs.............
> > > > > > if someone think its a problem with the fat filesystem i ahve
tried
> > on
> > > > > > the linux native filesystem and still the same problem,and also
i
> > have
> > > > > > installed the required lib and source code, like
kernel-devel,kernel
> > > > > > sourse code,and other dependences..
> > > > > > this is the only thing which stoping me using my linux and stuck
to
> > > > > > the Micro$oft and being the passive
> > user..............................
> > > > > > waiting for your help..............
> > > > > >
> > > > > >
> > > > > > 537_boot config_check hamregistry
license.txt readme.txt
> > usrsound
> > > > > > 537_inst coredrv inc makefile serialdrv
> > > > > > [root@myhost intel-537-2.27.39.0]# make clean
> > > > > > cd coredrv; make clean
> > > > > > make[1]: Entering directory
> > > > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > > > > rm -f *.o *~ core
> > > > > > make[1]: Leaving directory
> > > > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > > > > cd serialdrv; make clean
> > > > > > make[1]: Entering directory
> > > > > `/mnt/vfat/Downloads/intel- 537-2.27.39.0/serialdrv'
> > > > > > rm -f *.o *~ core
> > > > > > make[1]: Leaving directory
> > > > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > > > > rm -f *.o
> > > > > > rm -f *.o
> > > > > > [root@myhost intel-537-2.27.39.0]# export MODEM_TYPE=537
> > > > > > [root@myhost intel-537-2.27.39.0]# make 537
> > > > > > if [ -a /boot/vmlinuz.version.h ]; then \
> > > > > > cp /boot/vmlinuz.version.h /lib/modules/`uname
> > > > > > -r`/build/include/linux/version.h; fi
> > > > > > if [ ]; then \
> > > > > > cd coredrv; make TARGET=TARGET_CATAWBA
KERNEL_SOURCE_PATH=
> > > > > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
> > > > > > cd ../serialdrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH=
> > > > > > card=CARD_TJ320 \
> > > > > > "PSTN_DEF=-DTARGET_CATAWBA
-DTARGET_LINUX -DLINUX" 537; \
> > > > > > else \
> > > > > > cd coredrv; make TARGET=TARGET_CATAWBA
> > > > > > KERNEL_INCLUDES=/lib/modules/`uname
-r`/build/include \
> > > > > > "PSTN_DEF=-DTARGET_CATAWBA
-DTARGET_LINUX -DLINUX" 537core; \
> > > > > > cd ../serialdrv; make TARGET=TARGET_CATAWBA
> > > > > > KERNEL_INCLUDES=/lib/modules/`uname
-r`/build/include
> > card=CARD_TJ320
> > > > > > \
> > > > > > "PSTN_DEF=-DTARGET_CATAWBA
-DTARGET_LINUX -DLINUX" 537; \
> > > > > > fi ;
> > > > > > make[1]: Entering directory
> > > > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > > > > cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I
> > > > > > /lib/modules/`uname -r`/build/include -I ../inc -fno-common -c
-o
> > > > > > coredrv.o coredrv.c
> > > > > > In file included from
> > > > > /lib/modules/2.6.9- 5.EL/build/include/linux/irq.h:20,
> > > > > > from
> > > > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > > > from
> > > > > /lib/modules/2.6.9-
5.EL/build/include/linux/hardirq.h:6,
> > > > > > from
> > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
> > > > > > from coredrv.c :34:
> > > > > > /lib/modules/2.6.9-5.EL/build/include/asm/irq.h:16:25:
> > irq_vectors.h:
> > > > > > No such file or directory
> > > > > > In file included from
> > > > > /lib/modules/2.6.9- 5.EL/build/include/asm/hardirq.h:6,
> > > > > > from
> > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > > > from
> > > > > /lib/modules/2.6.9-
5.EL/build/include/linux/delay.h:13,
> > > > > > from coredrv.c:34:
> > > > > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:70: error:
> > `NR_IRQS'
> > > > > > undeclared here (not in a function)
> > > > > > In file included from
> > > > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:72,
> > > > > > from
> > > > > /lib/modules/2.6.9-5.EL /build/include/asm/hardirq.h:6,
> > > > > > from
> > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > > > from
> > > > > /lib/modules/2.6.9-
5.EL/build/include/linux/delay.h:13,
> > > > > > from coredrv.c:34:
> > > > > > /lib/modules/2.6.9-5.EL/build/include/asm/hw_irq.h:28: error:
> > > > > > `NR_IRQ_VECTORS' undeclared here (not in a function)
> > > > > > coredrv.c:73: warning: conflicting types for built-in function
> > > 'putchar'
> > > > > > coredrv.c: In function `get_pci_info_537':
> > > > > > coredrv.c:198: warning: return makes pointer from integer
without a
> > > cast
> > > > > > coredrv.c: In function `open':
> > > > > > coredrv.c:282: warning: passing arg 2 of `request_irq' from
> > > > > > incompatible pointer type
> > > > > > coredrv.c: In function `schedule_background_event':
> > > > > > coredrv.c:462: warning: implicit declaration of function
> > `queue_task'
> > > > > > coredrv.c:462: error: structure has no member named `tqueue'
> > > > > > coredrv.c:462: error: `tq_immediate' undeclared (first use in
this
> > > > > function)
> > > > > > coredrv.c:462: error: (Each undeclared identifier is reported
only
> > > once
> > > > > > coredrv.c:462: error: for each function it appears in.)
> > > > > > coredrv.c:463: warning: implicit declaration of function
`mark_bh'
> > > > > > coredrv.c:463: error: `IMMEDIATE_BH' undeclared (first use in
this
> > > > > function)
> > > > > > coredrv.c: At top level:
> > > > > > coredrv.c:520: warning: `MODULE_PARM_' is deprecated (declared
at
> > > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/module.h:552)
> > > > > > coredrv.c: In function
`interruptible_sleep_on_persistReadQ':
> > > > > > coredrv.c:635: warning: `interruptible_sleep_on' is deprecated
> > > > > > (declared at /lib/modules/2.6.9-
5.EL/build/include/linux/wait.h:290)
> > > > > > make[1]: *** [coredrv.o] Error 1
> > > > > > make[1]: Leaving directory
> > > > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > > > > make[1]: Entering directory
> > > > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > > > > cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I
> > > > > > /lib/modules/`uname -r`/build/include -I ../inc -fno-common -c
-o
> > > > > > softserial.o softserial.c
> > > > > > In file included from
> > > > > /lib/modules/2.6.9- 5.EL/build/include/linux/irq.h:20,
> > > > > > from
> > > > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > > > from
> > > > > /lib/modules/2.6.9-
5.EL/build/include/linux/hardirq.h:6,
> > > > > > from
> > > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
> > > > > > from
> > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > > > > from softserial.h:55,
> > > > > > from softserial.c:38:
> > > > > > /lib/modules/2.6.9- 5.EL/build/include/asm/irq.h:16:25:
> > irq_vectors.h:
> > > > > > No such file or directory
> > > > > > In file included from
> > > > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > > > from
> > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > > > from
> > > > > > /lib/modules/2.6.9-
5.EL/build/include/linux/interrupt.h:11,
> > > > > > from
> > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > > > > from softserial.h:55,
> > > > > > from softserial.c:38:
> > > > > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:70: error:
> > `NR_IRQS'
> > > > > > undeclared here (not in a function)
> > > > > > In file included from
> > > > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:72,
> > > > > > from
> > > > > /lib/modules/2.6.9-5.EL /build/include/asm/hardirq.h:6,
> > > > > > from
> > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > > > from
> > > > > > /lib/modules/2.6.9-
5.EL/build/include/linux/interrupt.h:11,
> > > > > > from
> > > > >
/lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > > > > from softserial.h:55,
> > > > > > from softserial.c:38:
> > > > > > /lib/modules/2.6.9-5.EL/build/include/asm/hw_irq.h:28: error:
> > > > > > `NR_IRQ_VECTORS' undeclared here (not in a function)
> > > > > > softserial.c: In function `init_module':
> > > > > > softserial.c:60: warning: implicit declaration of function
> > > `pci_present'
> > > > > > softserial.c : In function `softserial_register_tty':
> > > > > > softserial.c:99: warning: assignment makes integer from pointer
> > > without a
> > > > > cast
> > > > > > softserial.c :100: error: structure has no member named `table'
> > > > > > softserial.c: In function `softserial_open':
> > > > > > softserial.c:161: error: `MOD_IN_USE' undeclared (first use in
this
> > > > > function)
> > > > > > softserial.c:161: error: (Each undeclared identifier is reported
> > only
> > > once
> > > > > > softserial.c:161: error: for each function it appears in.)
> > > > > > softserial.c:163: error: `MOD_INC_USE_COUNT' undeclared (first
use
> > in
> > > > > > this function)
> > > > > > softserial.c:169: error: structure has no member named `device'
> > > > > > softserial.c:169: error: request for member `minor_start' in
> > something
> > > > > > not a structure or union
> > > > > > softserial.c:177: error: structure has no member named
> > > `normal_termios'
> > > > > > softserial.c:187: error: structure has no member named `tqueue'
> > > > > > softserial.c:188: error: structure has no member named `tqueue'
> > > > > > softserial.c:189: error: structure has no member named `session'
> > > > > > softserial.c:189: error: structure has no member named `session'
> > > > > > softserial.c:190: error: structure has no member named `pgrp'
> > > > > > softserial.c:190: error: structure has no member named `pgrp'
> > > > > > softserial.c:205: error: `MOD_DEC_USE_COUNT' undeclared (first
use
> > in
> > > > > > this function)
> > > > > > softserial.c: In function `softserial_close':
> > > > > > softserial.c:222: error: `MOD_IN_USE' undeclared (first use in
this
> > > > > function)
> > > > > > softserial.c:224: error: `MOD_DEC_USE_COUNT' undeclared (first
use
> > in
> > > > > > this function)
> > > > > > make[1]: *** [ softserial.o] Error 1
> > > > > > make[1]: Leaving directory
> > > > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > > > > make: *** [537] Error 2
> > > > > > [ root@myhost intel-537-2.27.39.0]# vim modem compiling
> > > > > > 2 files to edit
> > > > > > [root@myhost intel-537-2.27.39.0]#
> > > > > > regards.
> > > > > >
> > > > > > On 12/19/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
wrote:
> > > > > > > Blann,
> > > > > > >
> > > > > > > The "make install" command does also include the "make"
> > > > > > > I didn't want to continue through to the install component,
> > > > > > > as I don't have the modem hardware on my System.
> > > > > > >
> > > > > > > Now that the driver is properly installed, try a test as root:
> > > > > > > # wvdialconf wvtest
> > > > > > > Which should find the modem through the /dev/modem --> link
> > > > > > >
> > > > > > > Edit in your personal info with:
> > > > > > > # gedit wvtest
> > > > > > > to a final form like that below. The try a dialout with:
> > > > > > > # wvdial --config wvtest
> > > > > > >
> > > > > > > MarvS
> > > > > > >
> > > > > > > [Dialer Defaults]
> > > > > > > Baud = 115200
> > > > > > > Modem = /dev/537
> > > > > > > Init1 = ATZ
> > > > > > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > > > > > > Modem Type = Analog Modem
> > > > > > > Phone = 3015560020
> > > > > > > ISDN = 0
> > > > > > > Username = LoginName
> > > > > > > Password = YourPassWord
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 12/18/06, blann < blann@xxxxxxxxxxx> wrote:
> > > > > > > > I think I am moving forward:
> > > > > > > > 1) used:
> > > > > > >
> > touch/usr/src/kernels/2.6.18- 1.2798.fc6-i686/include/linux/config.h
> > > > > > > > This was supposed to create an empty config.h file, since
the
> > make
> > > > > failed
> > > > > > > > due to missing file.
> > > > > > > >
> > > > > > > > I then did the make clean,export MODEM_TYPE=537EP, make 537,
and
> > > > > install.
> > > > > > > > These were all done from the directory of the untarred intel
> > > driver
> > > > > > > > file.( I first tried moving the
> > > > > > > > intel535.ko file to the
/usr/src/kernels/2.6.18-1.2798.fc6-i686/
> > > sub
> > > > > > > > directory before
> > > > > > > > issueing install, that did not work. Doing it over just
using
> > the
> > > > > intel
> > > > > > > > driver directory (as root),
> > > > > > > > first issueing 'make clean', then after make 537 andafter
the
> > > 'make
> > > > > > > > install' the result is:
> > > > > > > >
> > > > > > > > rm -f /etc/hamregistry.bin
> > > > > > > > bash 537_inst
> > > > > > > > running kernel 2.6.18-1.2798.fc6
> > > > > > > > installing hamregistry, used for....
> > > > > > > > " usrsound, a soft...
> > > > > > > > " 537 module
> > > > > > > > install REDHAT 537 boot script and links
> > > > > > > > starting modules and utilities
> > > > > > > > done
> > > > > > > >
> > > > > > > > That sounds encouraging, tho some of the messages following
the
> > > 'make
> > > > > 537'
> > > > > > > > command were unsettling .
> > > > > > > > I tried the suggested tests:
> > > > > > > > ls -l /dev/modem
> > > > > > > > lrwxlrxrwx 1 root root 10 dec18 9:10 /dev/modem-> /dev/537
> > > > > > > > ls -l /dev/537*
> > > > > > > > crw-rw-rw- 1 root root 240, 1 dec 18 9:10 /dev/537
> > > > > > > > crw------- 1 root root 240, 1 dec 18 9:10 /dev/5370
> > > > > > > > (I note that I should change permission on the 5370 file,
but
> > > > > continued
> > > > > > > > testing as root)
> > > > > > > >
> > > > > > > > So this looks encouraging to a neophyte; I next tried the
wvdial
> > > > > software
> > > > > > > to
> > > > > > > > try to connect; it hung up unable
> > > > > > > > to make a connection. I must spend more time going over that
> > > aspect.
> > > > > It
> > > > > > > did
> > > > > > > > at one point say that it could
> > > > > > > > not detect a modem.
> > > > > > > >
> > > > > > > > Does it seem from the installation output as tho the modem
> > > > > installation
> > > > > > > was
> > > > > > > > a success? I did get a file intel537ko before
> > > > > > > > issueing the 'install 537' command.
> > > > > > > >
> > > > > > > > Thanks for advising if my present problem is getting the
system
> > to
> > > > > find
> > > > > > > the
> > > > > > > > driver, rather than the earlier step of
> > > > > > > > producing the driver.
> > > > > > > >
> > > > > > > > Marshall
> > > > > > > >
> > > > > > > > ----- Original Message -----
> > > > > > > > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
> > > > > > > > To: "blann" < blann@xxxxxxxxxxx>
> > > > > > > > Cc: <discuss@xxxxxxxxxxxxx>; "Philippe Vouters"
> > > > > > > > < philippe.Vouters@xxxxxxxxxxx>
> > > > > > > > Sent: Sunday, December 17, 2006 3:15 PM
> > > > > > > > Subject: Re: Fw: FC6 install intel 537EP
> > > > > > > >
> > > > > > > >
> > > > > > > > > Blann,
> > > > > > > > >
> > > > > > > > > RE: > This is the location which you should specify for
the
> > > > > > > > > compilation of Intel537.ko
> > > > > > > > > ----------
> > > > > > > > > No. The "make 537" process looks the kernel-headers
needed to
> > > unite
> > > > > > > > > with the modem specific code in
intel-537EP_secure-2.60.80.1/
> > > > > > > > > An expected position tested is in folders named:
> > > > > > > > > /usr/src/linux* or /usr/src/kernel* or through a
symbolic
> > > > > > > > > link:/ib/modules/kernel-version/build -->
> > > > > > > > > as it may be located in diverse other places on diverse
> > Systems.
> > > > > > > > >
> > > > > > > > > The /usr/src/kernels/kernel_version/
folder used by fedora is
> > > an
> > > > > > > > > innovation in using the intermediate /kernels/ folder.
This
> > > novelty
> > > > > > > > > "Philippe Vouters" <philippe.Vouters@xxxxxxxxxxx> hasn't
> > entered
> > > > > into
> > > > > > > > > the makefile search script yet. That is why you had to
enter
> > it
> > > "by
> > > > > > > > > hand".
> > > > > > > > >
> > > > > > > > > On my Ubuntu system with a 2.6.17 kernel, I ran:
> > > > > > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1$ make clean
> > > > > > > > > Lacking Intel537 modem hardware the autodetect failed, so
I
> > > > > compensated
> > > > > > > > > with:
> > > > > > > > > $ export MODEM_TYPE=537EP
> > > > > > > > > Then ran a successful compile with:
> > > > > > > > > $ make 537
> > > > > > > > > see details below. THe product is
> > > > > > > > > $ ls -l *.ko
> > > > > > > > > -rw-r--r-- 1 marv marv 4217168 2006-12-17 12:15
Intel537.ko
> > > > > > > > >
> > > > > > > > > On your system the compile failed at:
> > > > > > > > > -----------------
> > > > > > > > > make[2]: Entering directory
> > > > > `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
> > > > > > > > > CC [M]
/root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > > > > > > > In file included from
> > > > > > > > > /root/intel-537EP_secure-2.60.80.1/coredrv/hamcore.h:45,
> > > > > > > > > from
> > > > > > > > > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:33:
> > > > > > > > > /root/intel-537EP_secure-
2.60.80.1/coredrv/hamdefs.h:49:28:
> > > error:
> > > > > > > > > linux/config.h:
> > > > > > > > > ----------------
> > > > > > > > > On my system, this file is present at
> > > > > > > > > /usr/src/linux-source-2.6.17/include/linux/config.h
> > > > > > > > >
> > > > > > > > > I did install the FC6 headers-devel package system
(forcible)
> > > onto
> > > > > my
> > > > > > > > > Ubuntu system:
> > > > > > > > > /usr/src/kernels/2.6.18- 1.2798.fc6-i686
> > > > > > > > > and checked therein for include/linux/config.h
> > > > > > > > > It is indeed missing, and that is why the compile failed
on
> > your
> > > > > System.
> > > > > > > > >
> > > > > > > > > So this seems to be a FC6 bug, that is NOT resident in FC5
> > > > > > > > > Because in a FC5 installation on my laptop, there is the
> > > ounterpart
> > > > > > > > >
/usr/src/kernels/2.6.17-1.2187_FC5-i686/include/linux/config.h
> > > > > > > > > and I have run the Intel537.ko therein successfully.
> > > > > > > > >
> > > > > > > > > Perhaps some of our Fedora experts will have a suggestion
on
> > how
> > > to
> > > > > > > > > manage the linux/config.h absense in FC6.
> > > > > > > > >
> > > > > > > > > MarvS
> > > > > > > > >
> > > > > > > > > $ make 537
> > > > > > > > > Module precompile check
> > > > > > > > > Current running kernel is: 2.6.17.13-marv2
> > > > > > > > > /lib/modules... autoconf.h exists
> > > > > > > > > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > > > > > > > > autoconf.h matches running kernel
> > > > > > > > > diff: /boot/vmlinuz.version.h: No such file or directory
> > > > > > > > > version.h matches running kernel
> > > > > > > > > 2.6.17.13-marv2
> > > > > > > > > make[1]: Entering directory
> > > > > > > > > `/usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv'
> > > > > > > > > make -C
/lib/modules/2.6.17.13-marv2/build
> > > > > > > > >
SUBDIRS=/usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv
> > > > > modules
> > > > > > > > > make[2]: Entering directory `/usr/src/linux-source-2.6.17'
> > > > > > > > > CC [M]
> > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > > > > > > > CC [M]
> > > > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/clmmain.o
> > > > > > > > > CC [M]
> > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/rts.o
> > > > > > > > > CC [M]
> > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/task.o
> > > > > > > > > CC [M]
> > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/uart.o
> > > > > > > > > CC [M]
> > > > > > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/wwh_dflt.o
> > > > > > > > > CC [M]
> > > > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/locks.o
> > > > > > > > > CC [M]
> > > > > > > > >
> > > > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/softserial_io.o
> > > > > > > > > CC [M]
> > > > > > > > >
> > > > >
> > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/softserial_ioctl.o
> > > > > > > > > CC [M]
> > > > > > > > >
> > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/softserial.o
> > > > > > > > > CC [M]
> > > > > > > > >
> > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/afedsp_int.o
> > > > > > > > > LD [M]
> > > > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.o
> > > > > > > > > Building modules, stage 2.
> > > > > > > > > MODPOST
> > > > > > > > > WARNING: could not find
> > > > > > > > >
> > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/.537core.lib.cmd
> > > > > > > > > for
> > > > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/537core.lib
> > > > > > > > > CC
> > > > > > > > >
> > > /usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv/Intel537.mod.o
> > > > > > > > > LD [M]
> > > > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.ko
> > > > > > > > > make[2]: Leaving directory `/usr/src/linux-source-2.6.17'
> > > > > > > > > make[1]: Leaving directory
> > > > > > > > > `/usr/src/modules/intel-537EP_secure-
2.60.80.1/coredrv'
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On 12/17/06, blann < blann@xxxxxxxxxxx> wrote:
> > > > > > > > >>
> > > > > > > > >> Thanks for last suggestions. Downloaded the kernel-devel
> > > package
> > > > > and
> > > > > > > > >> tried
> > > > > > > > >> the installation,
> > > > > > > > >> only to get an 'already installed' message- so did not
> > proceed
> > > > > further
> > > > > > > on
> > > > > > > > >> that tack.
> > > > > > > > >> I tried, starting with 'make clean', the installation
again
> > > logged
> > > > > in
> > > > > > > as
> > > > > > > > >> root, and using the # export MODEM_TYPE= 537EP
> > > > > > > > >> before the ' make 537'. I append the output which
indicates a
> > > > > failure
> > > > > > > to
> > > > > > > > >> compile the driver.
> > > > > > > > >>
> > > > > > > > >> I performed these operations in directory /root/Intel*.
> > > > > > > > >>
> > > > > > > > >> I do not understand the suggestion "
> > > > > > > > >> /usr/src/kernels/2.6.18-1.2798.fc6-i686
> > > > > > > > >>
This is
> > > the
> > > > > > > location
> > > > > > > > >> which you should specify for the compilation of
Intel537.ko"
> > > > > > > > >> Where do I specify compilation location? Does the
makefile
> > not
> > > do
> > > > > that?
> > > > > > > > >> If
> > > > > > > > >> so, does one go into and modify that
> > > > > > > > >> file? And is it correct that I will get no compilation
until
> > > the
> > > > > cause
> > > > > > > of
> > > > > > > > >> the errors is corrected?
> > > > > > > > >>
> > > > > > > > >> In the 'readme' from Philippe Vouters there is in 1/ a
> > caution
> > > > > about
> > > > > > > the
> > > > > > > > >> CONFIG SMP definition.
> > > > > > > > >> I found the following references in the subdirectory-
none of
> > > which
> > > > > I
> > > > > > > > >> understand:
> > > > > > > > >>
> > > > > > > > >> define CONFIG_X86_SMP1
> > > > > > > > >> define CONFIG_SUSPEND_SMP1
> > > > > > > > >> define CONFIG_X86_FIND_SMP_CONFIG 1
> > > > > > > > >> define CONFIG_SMP 1
> > > > > > > > >>
> > > > > > > > >> I do not know if this constitutes the definition mismatch
in
> > > the
> > > > > > > caution.
> > > > > > > > >> Incidentally- I ran my FC6 install
> > > > > > > > >> using the option acpi=off. Hope this is not the cause of
my
> > > > > problems.
> > > > > > > > >> Once again, thank you for your help- Marshall
> > > > > > > > >> ----- Original Message -----
> > > > > > > > >> From: "blann" <blann@xxxxxxxxxxx>
> > > > > > > > >> To: < blann@xxxxxxxxxxx>
> > > > > > > > >> Sent: Saturday, December 16, 2006 5:51 AM
> > > > > > > > >> Subject: Fw: FC6 install intel 537EP
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> >
> > > > > > > > >> > ----- Original Message -----
> > > > > > > > >> > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
> > > > > > > > >> > To: "blann" < blann@xxxxxxxxxxx>
> > > > > > > > >> > Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>
> > > > > > > > >> > Sent: Saturday, December 16, 2006 7:22 AM
> > > > > > > > >> > Subject: Re: FC6 install intel 537EP
> > > > > > > > >> >
> > > > > > > > >> >
> > > > > > > > >> >> Blann
> > > > > > > > >> >>
> > > > > > > > >> >> kernel-headers are FileNames.h, in scripting language.
> > > > > > > > >> >> Some are installed to /usr/include/ and are called
upon
> > by
> > > > > > > executable
> > > > > > > > >> >> files.
> > > > > > > > >> >>
> > > > > > > > >> >> kernel-source is multipotential, and can be used to
> > > generate a
> > > > > > > > >> >> varierty of distinct kernel+module sets, depending
upon
> > the
> > > > > > > > >> >> configuration settings. The configuration of your
kernel
> > is
> > > > > > > > >> >> /boot/config-2.6.18-1.2798.fc6
> > > > > > > > >> >>
> > > > > > > > >> >> This configuration was used to generate the LARGE set
of
> > > > > filenames.h
> > > > > > > > >> >> set included in (Thanks Antonio)
> > > > > > > > >> >>
> > > > > > >
> > > > >
> > >
> >
ftp://ftp.linux.ncsu.edu/pub/fedora/linux/core/6/i386/os/Fedora/RPMS/kernel-devel-2.6.18-1.2798.fc6.i686.rpm
> > > > > > > > >> >> It has ALL the header files which were assembled,
prior to
> > > their
> > > > > > > > >> >> compilation into your kernel :
vmlinuz-2.6.18-1.2798.fc6
> > > > > > > > >> >> If is also necessary to compile any add in drivers.
> > > > > > > > >> >>
> > > > > > > > >> >> After download this package can be installed with
> > > > > > > > >> >> # rpm -i ker*.rpm
> > > > > > > > >> >> and the resultant base folder will be:
> > > > > > > > >> >> /usr/src/kernels/2.6.18- 1.2798.fc6-i686/
> > > > > > > > >> >> This is the location which you should specify for the
> > > > > compilation of
> > > > > > > > >> >> Intel537.ko
> > > > > > > > >> >> There likely is a symbolic link to this base folder:
> > > > > > > > >> >> /iib/modules/2.6.18-1.2798.fc6/build
> > > > > > > > >> >> which could be alternatively used (mostly I work under
> > > > > > > Debian/Ubuntu)
> > > > > > > > >> >>
> > > > > > > > >> >> MarvS
> > > > > > > > >> >>
> > > > > > > > >> >>
> > > > > > > > >> >>
> > > > > > > > >> >> On 12/16/06, blann < blann@xxxxxxxxxxx> wrote:
> > > > > > > > >> >>> I re-installed my FC6 OS to be sure that I had not
> > > corrupted it
> > > > > > > with
> > > > > > > > >> >>> my
> > > > > > > > >> >>> FC2
> > > > > > > > >> >>> driver attempt.
> > > > > > > > >> >>> I downloaded the intel-537EP_secure-
2.60.80.1_09_2006.tgz
> > > file
> > > > > > > > >> >>> I checked my install log and found that I had
installed
> > > kernel
> > > > > > > > >> >>> headers
> > > > > > > > >> >>> 2.6.18-1.2798.fc6
> > > > > > > > >> >>> and the same kernel source.
> > > > > > > > >> >>> After un-compressing the file, I checked that the
readme
> > > file
> > > > > was
> > > > > > > > >> >>> essentially the same as downloaded earlier
> > > > > > > > >> >>> for the fc2 attempt.
> > > > > > > > >> >>>
> > > > > > > > >> >>> I do not understand the suggestion:" Make sure your
> > > computer
> > > > > has
> > > > > > > all
> > > > > > > > >> >>> the
> > > > > > > > >> >>> prerequisites.....and your /usr/src/kernel
> > > > > > > > >> >>> /'uname -r' /include/linux/aotoconf.h does match your
> > > processor
> > > > > > > > >> >>> configuration. With this , check especially for:
> > > > > > > > >> >>> $grep SMP /usr/src/kernels/'uname
> > > -r'/include/linux/autoconf.h
> > > > > for
> > > > > > > > >> >>> CONFIG_SMP defined whereas your computer only
contains a
> > > single
> > > > > > > > >> >>> processor............... Sorry,
don't understand these
> > > > > comments.
> > > > > > > > >> >>>
> > > > > > > > >> >>> I logged on as root, went to the directory where the
> > > untarred
> > > > > files
> > > > > > > > >> >>> were
> > > > > > > > >> >>> stored, gave the
> > > > > > > > >> >>> #make clean
> > > > > > > > >> >>> #export MODEM TYPE=537EP
> > > > > > > > >> >>> #make 537
> > > > > > > > >> >>>
> > > > > > > > >> >>> The following output resulted:
> > > > > > > > >> >>>
> > > > > > > > >> >>> rm -f /etc/hamregistry.bin
> > > > > > > > >> >>> bash 537_inst
> > > > > > > > >> >>> running kernel 2.618-1.2798.fc6
> > > > > > > > >> >>> installing hamregistry,used for persistent storage
> > > > > > > > >> >>> installing usrsound, a soft buzzer
> > > > > > > > >> >>> installing 537 module
> > > > > > > > >> >>> install: cannot stat 'Intel537.ko':no such file or
> > > directory
> > > > > > > > >> >>> make:***[install] Error1
> > > > > > > > >> >>>
> > > > > > > > >> >>> Instructions kindly sent by Philippe (I can't locate
his
> > > return
> > > > > > > > >> >>> address)
> > > > > > > > >> >>> requested a file from running dmesg-
> > > > > > > > >> >>> if I understood- so I append the file. Please
advise
> > how
> > > I
> > > > > might
> > > > > > > > >> >>> proceed-
> > > > > > > > >> >>> thanks-Marshall
> > > > > > > > >> >>>
> > > > > > > > >> >>>
> > > > > > > > >> >>>
> > > > > > > > >> >
> > > > > > > > >> >
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > --
> > > > > > Raheel Kaghzi
> > > > > > 92-333-7103250.
> > > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > --
> > > > Raheel Kaghzi
> > > > 92-333-7103250.
> > > >
> > >
> >
> >
> > --
> > --
> > Raheel Kaghzi
> > 92-333-7103250.
> >
>
>
> --
> --
> Raheel Kaghzi
> 92-333-7103250.
>
--
--
Raheel Kaghzi
92-333-7103250.
