hello every one,
here is the updates of driver i got from intel web.
marvin i am waiting for your reply.....!!!!!!!!!1
when i run the
#dmesg
here is the result....
---
6e90
ACPI: SSDT (v001 INTEL CpuPm 0x00000dc8 MSFT 0x01000013) @ 0x3f6fdc10
ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000dc8 MSFT 0x01000013) @ 0x3f6fda10
ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000dc8 MSFT 0x01000013) @ 0x3f6fd810
ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000dc8 MSFT 0x01000013) @ 0x3f6fd610
ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000dc8 MSFT 0x01000013) @ 0x3f6fd410
ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x3f6e3d90
ACPI: DSDT (v001 INTEL D945GNT 0x00000dc8 MSFT 0x01000013) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03d3000 soft=c03d2000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1025380k/1039360k available (2055k kernel code, 12716k
reserved, 655k data, 140k init, 121332k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 3000.435 MHz processor.
Using hpet for high-res timesource
Calibrating delay loop... 5947.39 BogoMIPS (lpj=2973696)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 384k freed
NET: Registered protocol family 16
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Unable to handle 64-bit address space for
PCI: Unable to handle 64-bit address space for
PCI: Unable to handle 64-bit address space for
PCI: Unable to handle 64-bit address space for
PCI: Unable to handle 64-bit address space for
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1c.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1c.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1c.4[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1c.5[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:06:05.0[A] -> GSI 11 (level, low) -> IRQ 11
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1167256564.398:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key E07BC3E85BE30CFD
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU0] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: ST380817AS, ATA DISK drive
Probing IDE interface ide1...
hdc: ST380011A, ATA DISK drive
hdd: DVDRW IDE 16X, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
hdc: max request size: 1024KiB
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 >
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
cpufreq: CPU0 - ACPI performance management activated.
cpufreq: *P0: 3000 MHz, 89000 mW, 160 uS
cpufreq: P1: 2800 MHz, 85974 mW, 160 uS
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
SLPB P32 UAR1 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 UHC1 UHC2 UHC3 UHC4 EHCI AC9M AZAL
Freeing unused kernel memory: 140k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 316 types, 20 bools
security: 53 classes, 9815 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured
for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-5.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Intel(R) PRO/1000 Network Driver - version 6.0.54-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:01:00.0 to 64
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem f8828400
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 10, io base 00003080
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 00003060
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 00003040
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 11, io base 00003020
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 3-2: new full speed USB device using address 2
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
EXT3 FS on hda3, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x54
ide: failed opcode was 100
ATAPI device hdd:
Error: Illegal request -- (Sense key=0x05)
(reserved error code) -- (asc=0x64, ascq=0x03)
The failed "Read 10" packet command was:
"28 00 00 05 56 a0 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdd, sector 1399424
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda5, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda7, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda8, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda6, type ext3), uses xattr
SELinux: initialized (dev hda10, type vfat), uses genfs_contexts
Adding 2104472k swap on /dev/hda9. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8120 buckets, 64960 max) - 356 bytes per conntrack
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0366c20(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Intel537: no version for "struct_module" found: kernel tainted.
Intel537: no version magic, tainting kernel.
Intel537: module license 'Proprietary' taints kernel.
sound disabled
Intel 537 card found
This Intel(R) 537EP Modem driver won't install on Intel 537 card,
please download the right driver
eth0: no IPv6 routers present
mtrr: no more MTRRs available
---
regards.
On 12/25/06, Raheel Kaghzi <raheelkaghzi@xxxxxxxxx> wrote:
hello everyone,
marvin i have tried to installed the new driver from intel the weblink
u sent to me,
http://downloadfinder.intel.com/scripts-df-external/filter_results.aspx?strTypes=all&ProductID=1230&OSFullName=Red+Hat*+Linux+9.0&lang=eng&strOSs=89&submit=Go%21
now here are the details of this drivers.........
now see and tell me, my hardware configurator show the tigerJet modem
in the list....
looking forward to u.
regards.
===
[root@myhost intel-537EP_secure-2.6]# make clean
cd coredrv; make clean
make[1]: Entering directory `/root/intel-537EP_secure-2.6/coredrv'
rm -f *.ko *.o *~ core
make[1]: Leaving directory `/root/intel-537EP_secure-2.6/coredrv'
rm -f *.o *.ko
[root@myhost intel-537EP_secure-2.6]# make 537
Module precompile check
Current running kernel is: 2.6.9-5.EL
/lib/modules... autoconf.h exists
diff: /boot/vmlinuz.autoconf.h: No such file or directory
autoconf.h matches running kernel
diff: /boot/vmlinuz.version.h: No such file or directory
version.h matches running kernel
2.6.9-5.EL
make[1]: Entering directory `/root/intel-537EP_secure-2.6/coredrv'
make -C /lib/modules/2.6.9-5.EL/build
SUBDIRS=/root/intel-537EP_secure-2.6/coredrv modules
make[2]: Entering directory `/usr/src/kernels/2.6.9-5.EL-i686'
CC [M] /root/intel-537EP_secure-2.6/coredrv/coredrv.o
/root/intel-537EP_secure-2.6/coredrv/coredrv.c: In function
`softcore_init_struct':
/root/intel-537EP_secure-2.6/coredrv/coredrv.c:336: warning:
assignment from incompatible pointer type
/root/intel-537EP_secure-2.6/coredrv/coredrv.c: At top level:
/root/intel-537EP_secure-2.6/coredrv/coredrv.c:641: warning:
`MODULE_PARM_' is deprecated (declared at include/linux/module.h:552)
/root/intel-537EP_secure-2.6/coredrv/coredrv.c:754: warning:
initialization from incompatible pointer type
/root/intel-537EP_secure-2.6/coredrv/coredrv.c:755: warning:
initialization from incompatible pointer type
/root/intel-537EP_secure-2.6/coredrv/coredrv.c: In function
`dspdrv_CommRamISR':/root/intel-537EP_secure-2.6/coredrv/coredrv.c:877:
warning: function declaration isn't a prototype
CC [M] /root/intel-537EP_secure-2.6/coredrv/clmmain.o
CC [M] /root/intel-537EP_secure-2.6/coredrv/rts.o
/root/intel-537EP_secure-2.6/coredrv/rts.c: In function `RTS_Enable':
/root/intel-537EP_secure-2.6/coredrv/rts.c:118: warning: assignment
from incompatible pointer type
CC [M] /root/intel-537EP_secure-2.6/coredrv/task.o
/root/intel-537EP_secure-2.6/coredrv/task.c: In function `RSATaskYield':
/root/intel-537EP_secure-2.6/coredrv/task.c:144: warning:
`interruptible_sleep_on' is deprecated (declared at
include/linux/wait.h:290)
CC [M] /root/intel-537EP_secure-2.6/coredrv/uart.o
/root/intel-537EP_secure-2.6/coredrv/uart.c: In function `UART_msr_wait':
/root/intel-537EP_secure-2.6/coredrv/uart.c:94: warning:
`interruptible_sleep_on' is deprecated (declared at
include/linux/wait.h:290)
CC [M] /root/intel-537EP_secure-2.6/coredrv/wwh_dflt.o
CC [M] /root/intel-537EP_secure-2.6/coredrv/locks.o
CC [M] /root/intel-537EP_secure-2.6/coredrv/softserial_io.o
CC [M] /root/intel-537EP_secure-2.6/coredrv/softserial_ioctl.o
CC [M] /root/intel-537EP_secure-2.6/coredrv/softserial.o
CC [M] /root/intel-537EP_secure-2.6/coredrv/afedsp_int.o
/root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:48: warning:
function declaration isn't a prototype
/root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:61: warning:
initialization from incompatible pointer type
/root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:65: warning:
function declaration isn't a prototype
/root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:113: warning:
conflicting types for built-in function 'malloc'
/root/intel-537EP_secure-2.6/coredrv/afedsp_int.c:454: warning:
initialization from incompatible pointer type
LD [M] /root/intel-537EP_secure-2.6/coredrv/Intel537.o
Building modules, stage 2.
MODPOST
CC /root/intel-537EP_secure-2.6/coredrv/Intel537.mod.o
LD [M] /root/intel-537EP_secure-2.6/coredrv/Intel537.ko
make[2]: Leaving directory `/usr/src/kernels/2.6.9-5.EL-i686'
make[1]: Leaving directory `/root/intel-537EP_secure-2.6/coredrv'
[root@myhost intel-537EP_secure-2.6]# make install
rm -f /etc/hamregistry.bin
bash 537_inst
running kernel 2.6.9-5.EL
installing hamregistry, used for persistant storage
installing usrsound, a soft buzzer
installing 537 module
redhat 537_boot rc2.d, rc3.d and rc5.d scripts
starting module and utilities
error loading Intel537
ERROR: Module Intel537 does not exist in /proc/modules
done
[root@myhost intel-537EP_secure-2.6]#
===
looking forwar to u.
On 12/24/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> Raheel,
>
> The compile is now proceeding, but there is some problem with your
> particular kernel. I am leaving on 2 weeks travel tomorrow. Note that
>
http://downloadfinder.intel.com/scripts-df-external/filter_results.aspx?strTypes=all&ProductID=1230&OSFullName=Red+Hat*+Linux+9.0&lang=eng&strOSs=89&submit=Go%21
> has drivers that may match your kernel. Blann can likely help with
> later issues if you get a functional driver. Do copy messages to the
> List for broader help.
>
> MarvS
>
> On 12/23/06, Raheel Kaghzi <raheelkaghzi@xxxxxxxxx> wrote:
> > here are the details of new driver....18 dec 2006.
> > looking forward to u.
> > ----
> > [root@myhost intel-537EP_secure-2.60.80.1]# ls
> > 537_boot config_check hamregistry makefile usrsound
> > 537_inst coredrv license.txt readme.txt
> > [root@myhost intel-537EP_secure-2.60.80.1]# make clean
> > cd coredrv; make clean
> > make[1]: Entering directory `/root/intel-537EP_secure-2.60.80.1/coredrv'
> > rm -f *.ko *.o .*.o.cmd *.mod.c *~ core .*.ko.cmd Modules.symvers
> > rm -rf .tmp_versions
> > make[1]: Leaving directory `/root/intel-537EP_secure-2.60.80.1/coredrv'
> > rm -f *.o *.ko
> > [root@myhost intel-537EP_secure-2.60.80.1]# export MODEM_TYPE=537
> > [root@myhost intel-537EP_secure-2.60.80.1]# make 537
> > Module precompile check
> > Current running kernel is: 2.6.9-5.EL
> > /lib/modules... autoconf.h exists
> > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > autoconf.h matches running kernel
> > diff: /boot/vmlinuz.version.h: No such file or directory
> > version.h matches running kernel
> > 2.6.9-5.EL
> > make[1]: Entering directory `/root/intel-537EP_secure-2.60.80.1/coredrv'
> > make -C /lib/modules/2.6.9-5.EL/build
> > SUBDIRS=/root/intel-537EP_secure-2.60.80.1/coredrv modules
> > make[2]: Entering directory `/usr/src/kernels/2.6.9-5.EL-i686'
> > CC [M] /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c: In function
> > `send_data_to_user':
> > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:625: error:
> > subscripted value is neither array nor pointer
> > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c: At top level:
> > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:707: warning:
> > `MODULE_PARM_' is deprecated (declared at include/linux/module.h:552)
> > make[3]: *** [/root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o]
Error
> 1
> > make[2]: *** [_module_/root/intel-537EP_secure-2.60.80.1/coredrv] Error
2
> > make[2]: Leaving directory `/usr/src/kernels/2.6.9-5.EL-i686'
> > make[1]: *** [537core_26] Error 2
> > make[1]: Leaving directory `/root/intel-537EP_secure-2.60.80.1/coredrv'
> > 2.6.9-5.EL
> > Failed to build driver
> > [root@myhost intel-537EP_secure-2.60.80.1]#
> > regards.
> > -----
> >
> > On 12/24/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> > > Raheel,
> > >
> > > You should try the
> > > intel-537EP_secure-2.60.80.1_18_12_2006.tgz 18-Dec-2006 14:17 1.5M
> > > at
> http://phep2.technion.ac.il/linmodems/packages/Intel/Philippe.Vouters/
> > >
> > > Something is broken in your copy of the intel-537-2.27.39.0 code
> package,
> > > because the script is just being displayed rather than executed.
> > >
> > > It should look like:
> > > $ make clean
> > > cd coredrv; make clean
> > > make[1]: Entering directory
> > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > rm -f *.ko *.o .*.o.cmd *.mod.c *~ core .*.ko.cmd Modules.symvers
> > > rm -rf .tmp_versions
> > > make[1]: Leaving directory
> > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > rm -f *.o *.ko
> > >
> > > $ export MODEM_TYPE=537EP
> > >
> > > $ make 537
> > > Module precompile check
> > > Current running kernel is: 2.6.17.14-marv3
> > > /lib/modules... autoconf.h exists
> > > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > > autoconf.h matches running kernel
> > > diff: /boot/vmlinuz.version.h: No such file or directory
> > > version.h matches running kernel
> > > 2.6.17.14-marv3
> > > make[1]: Entering directory
> > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > make -C /lib/modules/2.6.17.14-marv3/build
> > > SUBDIRS=/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv modules
> > > make[2]: Entering directory `/usr/src/linux-source-2.6.17'
> > > CC [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > CC [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/clmmain.o
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/rts.o
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/task.o
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/uart.o
> > > CC [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/wwh_dflt.o
> > > CC [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/locks.o
> > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_io.o
> > > CC [M]
> > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_ioctl.o
> > > CC [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial.o
> > > CC [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/afedsp_int.o
> > > LD [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.o
> > > Building modules, stage 2.
> > > MODPOST
> > > WARNING: could not find
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/.537core.lib.cmd
> > > for /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/537core.lib
> > > CC
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.mod.o
> > > LD [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.ko
> > > make[2]: Leaving directory `/usr/src/linux-source-2.6.17'
> > > make[1]: Leaving directory
> > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > >
> > > The product is:
> > > $ ls -l *.ko
> > > -rw-r--r-- 1 marv marv 4217168 2006-12-23 14:54 Intel537.ko
> > >
> > >
> > >
> > > On 12/23/06, Raheel Kaghzi <raheelkaghzi@xxxxxxxxx> wrote:
> > > > hello everybody,
> > > > i was waiting for your help from last one month,but unable to
> > > > succeeded with the modem intel 537EP driver installation,
> > > > i have RHEL4,kernel 2.6.9-5EL ,i have tested all the drivers i ahve
> > > > from linmodem and amigo website gave me and the intel drivers.
> > > > facing problems.
> > > > erorrs.............
> > > > if someone think its a problem with the fat filesystem i ahve tried
on
> > > > the linux native filesystem and still the same problem,and also i
have
> > > > installed the required lib and source code, like kernel-devel,kernel
> > > > sourse code,and other dependences..
> > > > this is the only thing which stoping me using my linux and stuck to
> > > > the Micro$oft and being the passive
user..............................
> > > > waiting for your help..............
> > > >
> > > >
> > > > 537_boot config_check hamregistry license.txt readme.txt
usrsound
> > > > 537_inst coredrv inc makefile serialdrv
> > > > [root@myhost intel-537-2.27.39.0]# make clean
> > > > cd coredrv; make clean
> > > > make[1]: Entering directory
> > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > > rm -f *.o *~ core
> > > > make[1]: Leaving directory
> > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > > cd serialdrv; make clean
> > > > make[1]: Entering directory
> > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > > rm -f *.o *~ core
> > > > make[1]: Leaving directory
> > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > > rm -f *.o
> > > > rm -f *.o
> > > > [root@myhost intel-537-2.27.39.0]# export MODEM_TYPE=537
> > > > [root@myhost intel-537-2.27.39.0]# make 537
> > > > if [ -a /boot/vmlinuz.version.h ]; then \
> > > > cp /boot/vmlinuz.version.h /lib/modules/`uname
> > > > -r`/build/include/linux/version.h; fi
> > > > if [ ]; then \
> > > > cd coredrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH=
> > > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
> > > > cd ../serialdrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH=
> > > > card=CARD_TJ320 \
> > > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
> > > > else \
> > > > cd coredrv; make TARGET=TARGET_CATAWBA
> > > > KERNEL_INCLUDES=/lib/modules/`uname -r`/build/include \
> > > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
> > > > cd ../serialdrv; make TARGET=TARGET_CATAWBA
> > > > KERNEL_INCLUDES=/lib/modules/`uname -r`/build/include
card=CARD_TJ320
> > > > \
> > > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
> > > > fi ;
> > > > make[1]: Entering directory
> > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > > cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I
> > > > /lib/modules/`uname -r`/build/include -I ../inc -fno-common -c -o
> > > > coredrv.o coredrv.c
> > > > In file included from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:20,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
> > > > from coredrv.c:34:
> > > > /lib/modules/2.6.9-5.EL/build/include/asm/irq.h:16:25:
irq_vectors.h:
> > > > No such file or directory
> > > > In file included from
> > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
> > > > from coredrv.c:34:
> > > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:70: error:
`NR_IRQS'
> > > > undeclared here (not in a function)
> > > > In file included from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:72,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
> > > > from coredrv.c:34:
> > > > /lib/modules/2.6.9-5.EL/build/include/asm/hw_irq.h:28: error:
> > > > `NR_IRQ_VECTORS' undeclared here (not in a function)
> > > > coredrv.c:73: warning: conflicting types for built-in function
> 'putchar'
> > > > coredrv.c: In function `get_pci_info_537':
> > > > coredrv.c:198: warning: return makes pointer from integer without a
> cast
> > > > coredrv.c: In function `open':
> > > > coredrv.c:282: warning: passing arg 2 of `request_irq' from
> > > > incompatible pointer type
> > > > coredrv.c: In function `schedule_background_event':
> > > > coredrv.c:462: warning: implicit declaration of function
`queue_task'
> > > > coredrv.c:462: error: structure has no member named `tqueue'
> > > > coredrv.c:462: error: `tq_immediate' undeclared (first use in this
> > > function)
> > > > coredrv.c:462: error: (Each undeclared identifier is reported only
> once
> > > > coredrv.c:462: error: for each function it appears in.)
> > > > coredrv.c:463: warning: implicit declaration of function `mark_bh'
> > > > coredrv.c:463: error: `IMMEDIATE_BH' undeclared (first use in this
> > > function)
> > > > coredrv.c: At top level:
> > > > coredrv.c:520: warning: `MODULE_PARM_' is deprecated (declared at
> > > > /lib/modules/2.6.9-5.EL/build/include/linux/module.h:552)
> > > > coredrv.c: In function `interruptible_sleep_on_persistReadQ':
> > > > coredrv.c:635: warning: `interruptible_sleep_on' is deprecated
> > > > (declared at /lib/modules/2.6.9-5.EL/build/include/linux/wait.h:290)
> > > > make[1]: *** [coredrv.o] Error 1
> > > > make[1]: Leaving directory
> > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > > make[1]: Entering directory
> > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > > cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I
> > > > /lib/modules/`uname -r`/build/include -I ../inc -fno-common -c -o
> > > > softserial.o softserial.c
> > > > In file included from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:20,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > from
> > > > /lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > > from softserial.h:55,
> > > > from softserial.c:38:
> > > > /lib/modules/2.6.9-5.EL/build/include/asm/irq.h:16:25:
irq_vectors.h:
> > > > No such file or directory
> > > > In file included from
> > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > from
> > > > /lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > > from softserial.h:55,
> > > > from softserial.c:38:
> > > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:70: error:
`NR_IRQS'
> > > > undeclared here (not in a function)
> > > > In file included from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:72,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > > from
> > > > /lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
> > > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > > from softserial.h:55,
> > > > from softserial.c:38:
> > > > /lib/modules/2.6.9-5.EL/build/include/asm/hw_irq.h:28: error:
> > > > `NR_IRQ_VECTORS' undeclared here (not in a function)
> > > > softserial.c: In function `init_module':
> > > > softserial.c:60: warning: implicit declaration of function
> `pci_present'
> > > > softserial.c: In function `softserial_register_tty':
> > > > softserial.c:99: warning: assignment makes integer from pointer
> without a
> > > cast
> > > > softserial.c:100: error: structure has no member named `table'
> > > > softserial.c: In function `softserial_open':
> > > > softserial.c:161: error: `MOD_IN_USE' undeclared (first use in this
> > > function)
> > > > softserial.c:161: error: (Each undeclared identifier is reported
only
> once
> > > > softserial.c:161: error: for each function it appears in.)
> > > > softserial.c:163: error: `MOD_INC_USE_COUNT' undeclared (first use
in
> > > > this function)
> > > > softserial.c:169: error: structure has no member named `device'
> > > > softserial.c:169: error: request for member `minor_start' in
something
> > > > not a structure or union
> > > > softserial.c:177: error: structure has no member named
> `normal_termios'
> > > > softserial.c:187: error: structure has no member named `tqueue'
> > > > softserial.c:188: error: structure has no member named `tqueue'
> > > > softserial.c:189: error: structure has no member named `session'
> > > > softserial.c:189: error: structure has no member named `session'
> > > > softserial.c:190: error: structure has no member named `pgrp'
> > > > softserial.c:190: error: structure has no member named `pgrp'
> > > > softserial.c:205: error: `MOD_DEC_USE_COUNT' undeclared (first use
in
> > > > this function)
> > > > softserial.c: In function `softserial_close':
> > > > softserial.c:222: error: `MOD_IN_USE' undeclared (first use in this
> > > function)
> > > > softserial.c:224: error: `MOD_DEC_USE_COUNT' undeclared (first use
in
> > > > this function)
> > > > make[1]: *** [softserial.o] Error 1
> > > > make[1]: Leaving directory
> > > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > > make: *** [537] Error 2
> > > > [root@myhost intel-537-2.27.39.0]# vim modem compiling
> > > > 2 files to edit
> > > > [root@myhost intel-537-2.27.39.0]#
> > > > regards.
> > > >
> > > > On 12/19/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> > > > > Blann,
> > > > >
> > > > > The "make install" command does also include the "make"
> > > > > I didn't want to continue through to the install component,
> > > > > as I don't have the modem hardware on my System.
> > > > >
> > > > > Now that the driver is properly installed, try a test as root:
> > > > > # wvdialconf wvtest
> > > > > Which should find the modem through the /dev/modem --> link
> > > > >
> > > > > Edit in your personal info with:
> > > > > # gedit wvtest
> > > > > to a final form like that below. The try a dialout with:
> > > > > # wvdial --config wvtest
> > > > >
> > > > > MarvS
> > > > >
> > > > > [Dialer Defaults]
> > > > > Baud = 115200
> > > > > Modem = /dev/537
> > > > > Init1 = ATZ
> > > > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > > > > Modem Type = Analog Modem
> > > > > Phone = 3015560020
> > > > > ISDN = 0
> > > > > Username = LoginName
> > > > > Password = YourPassWord
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 12/18/06, blann <blann@xxxxxxxxxxx> wrote:
> > > > > > I think I am moving forward:
> > > > > > 1) used:
> > > > >
touch/usr/src/kernels/2.6.18-1.2798.fc6-i686/include/linux/config.h
> > > > > > This was supposed to create an empty config.h file, since the
make
> > > failed
> > > > > > due to missing file.
> > > > > >
> > > > > > I then did the make clean,export MODEM_TYPE=537EP, make 537, and
> > > install.
> > > > > > These were all done from the directory of the untarred intel
> driver
> > > > > > file.( I first tried moving the
> > > > > > intel535.ko file to the /usr/src/kernels/2.6.18-1.2798.fc6-i686/
> sub
> > > > > > directory before
> > > > > > issueing install, that did not work. Doing it over just using
the
> > > intel
> > > > > > driver directory (as root),
> > > > > > first issueing 'make clean', then after make 537 andafter the
> 'make
> > > > > > install' the result is:
> > > > > >
> > > > > > rm -f /etc/hamregistry.bin
> > > > > > bash 537_inst
> > > > > > running kernel 2.6.18-1.2798.fc6
> > > > > > installing hamregistry, used for....
> > > > > > " usrsound, a soft...
> > > > > > " 537 module
> > > > > > install REDHAT 537 boot script and links
> > > > > > starting modules and utilities
> > > > > > done
> > > > > >
> > > > > > That sounds encouraging, tho some of the messages following the
> 'make
> > > 537'
> > > > > > command were unsettling .
> > > > > > I tried the suggested tests:
> > > > > > ls -l /dev/modem
> > > > > > lrwxlrxrwx 1 root root 10 dec18 9:10 /dev/modem-> /dev/537
> > > > > > ls -l /dev/537*
> > > > > > crw-rw-rw- 1 root root 240, 1 dec 18 9:10 /dev/537
> > > > > > crw------- 1 root root 240, 1 dec 18 9:10 /dev/5370
> > > > > > (I note that I should change permission on the 5370 file, but
> > > continued
> > > > > > testing as root)
> > > > > >
> > > > > > So this looks encouraging to a neophyte; I next tried the wvdial
> > > software
> > > > > to
> > > > > > try to connect; it hung up unable
> > > > > > to make a connection. I must spend more time going over that
> aspect.
> > > It
> > > > > did
> > > > > > at one point say that it could
> > > > > > not detect a modem.
> > > > > >
> > > > > > Does it seem from the installation output as tho the modem
> > > installation
> > > > > was
> > > > > > a success? I did get a file intel537ko before
> > > > > > issueing the 'install 537' command.
> > > > > >
> > > > > > Thanks for advising if my present problem is getting the system
to
> > > find
> > > > > the
> > > > > > driver, rather than the earlier step of
> > > > > > producing the driver.
> > > > > >
> > > > > > Marshall
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
> > > > > > To: "blann" <blann@xxxxxxxxxxx>
> > > > > > Cc: <discuss@xxxxxxxxxxxxx>; "Philippe Vouters"
> > > > > > <philippe.Vouters@xxxxxxxxxxx>
> > > > > > Sent: Sunday, December 17, 2006 3:15 PM
> > > > > > Subject: Re: Fw: FC6 install intel 537EP
> > > > > >
> > > > > >
> > > > > > > Blann,
> > > > > > >
> > > > > > > RE: > This is the location which you should specify for the
> > > > > > > compilation of Intel537.ko
> > > > > > > ----------
> > > > > > > No. The "make 537" process looks the kernel-headers needed to
> unite
> > > > > > > with the modem specific code in intel-537EP_secure-2.60.80.1/
> > > > > > > An expected position tested is in folders named:
> > > > > > > /usr/src/linux* or /usr/src/kernel* or through a symbolic
> > > > > > > link:/ib/modules/kernel-version/build -->
> > > > > > > as it may be located in diverse other places on diverse
Systems.
> > > > > > >
> > > > > > > The /usr/src/kernels/kernel_version/ folder used by fedora is
> an
> > > > > > > innovation in using the intermediate /kernels/ folder. This
> novelty
> > > > > > > "Philippe Vouters" <philippe.Vouters@xxxxxxxxxxx> hasn't
entered
> > > into
> > > > > > > the makefile search script yet. That is why you had to enter
it
> "by
> > > > > > > hand".
> > > > > > >
> > > > > > > On my Ubuntu system with a 2.6.17 kernel, I ran:
> > > > > > > /usr/src/modules/intel-537EP_secure-2.60.80.1$ make clean
> > > > > > > Lacking Intel537 modem hardware the autodetect failed, so I
> > > compensated
> > > > > > > with:
> > > > > > > $ export MODEM_TYPE=537EP
> > > > > > > Then ran a successful compile with:
> > > > > > > $ make 537
> > > > > > > see details below. THe product is
> > > > > > > $ ls -l *.ko
> > > > > > > -rw-r--r-- 1 marv marv 4217168 2006-12-17 12:15 Intel537.ko
> > > > > > >
> > > > > > > On your system the compile failed at:
> > > > > > > -----------------
> > > > > > > make[2]: Entering directory
> > > `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
> > > > > > > CC [M] /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > > > > > In file included from
> > > > > > > /root/intel-537EP_secure-2.60.80.1/coredrv/hamcore.h:45,
> > > > > > > from
> > > > > > > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:33:
> > > > > > > /root/intel-537EP_secure-2.60.80.1/coredrv/hamdefs.h:49:28:
> error:
> > > > > > > linux/config.h:
> > > > > > > ----------------
> > > > > > > On my system, this file is present at
> > > > > > > /usr/src/linux-source-2.6.17/include/linux/config.h
> > > > > > >
> > > > > > > I did install the FC6 headers-devel package system (forcible)
> onto
> > > my
> > > > > > > Ubuntu system:
> > > > > > > /usr/src/kernels/2.6.18-1.2798.fc6-i686
> > > > > > > and checked therein for include/linux/config.h
> > > > > > > It is indeed missing, and that is why the compile failed on
your
> > > System.
> > > > > > >
> > > > > > > So this seems to be a FC6 bug, that is NOT resident in FC5
> > > > > > > Because in a FC5 installation on my laptop, there is the
> ounterpart
> > > > > > > /usr/src/kernels/2.6.17-1.2187_FC5-i686/include/linux/config.h
> > > > > > > and I have run the Intel537.ko therein successfully.
> > > > > > >
> > > > > > > Perhaps some of our Fedora experts will have a suggestion on
how
> to
> > > > > > > manage the linux/config.h absense in FC6.
> > > > > > >
> > > > > > > MarvS
> > > > > > >
> > > > > > > $ make 537
> > > > > > > Module precompile check
> > > > > > > Current running kernel is: 2.6.17.13-marv2
> > > > > > > /lib/modules... autoconf.h exists
> > > > > > > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > > > > > > autoconf.h matches running kernel
> > > > > > > diff: /boot/vmlinuz.version.h: No such file or directory
> > > > > > > version.h matches running kernel
> > > > > > > 2.6.17.13-marv2
> > > > > > > make[1]: Entering directory
> > > > > > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > > > > > make -C /lib/modules/2.6.17.13-marv2/build
> > > > > > > SUBDIRS=/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv
> > > modules
> > > > > > > make[2]: Entering directory `/usr/src/linux-source-2.6.17'
> > > > > > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > > > > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/clmmain.o
> > > > > > > CC [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/rts.o
> > > > > > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/task.o
> > > > > > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/uart.o
> > > > > > > CC [M]
> > > > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/wwh_dflt.o
> > > > > > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/locks.o
> > > > > > > CC [M]
> > > > > > >
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_io.o
> > > > > > > CC [M]
> > > > > > >
> > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_ioctl.o
> > > > > > > CC [M]
> > > > > > >
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial.o
> > > > > > > CC [M]
> > > > > > >
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/afedsp_int.o
> > > > > > > LD [M]
> > > > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.o
> > > > > > > Building modules, stage 2.
> > > > > > > MODPOST
> > > > > > > WARNING: could not find
> > > > > > >
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/.537core.lib.cmd
> > > > > > > for
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/537core.lib
> > > > > > > CC
> > > > > > >
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.mod.o
> > > > > > > LD [M]
> > > > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.ko
> > > > > > > make[2]: Leaving directory `/usr/src/linux-source-2.6.17'
> > > > > > > make[1]: Leaving directory
> > > > > > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > > > > >
> > > > > > >
> > > > > > > On 12/17/06, blann <blann@xxxxxxxxxxx> wrote:
> > > > > > >>
> > > > > > >> Thanks for last suggestions. Downloaded the kernel-devel
> package
> > > and
> > > > > > >> tried
> > > > > > >> the installation,
> > > > > > >> only to get an 'already installed' message- so did not
proceed
> > > further
> > > > > on
> > > > > > >> that tack.
> > > > > > >> I tried, starting with 'make clean', the installation again
> logged
> > > in
> > > > > as
> > > > > > >> root, and using the # export MODEM_TYPE= 537EP
> > > > > > >> before the ' make 537'. I append the output which indicates a
> > > failure
> > > > > to
> > > > > > >> compile the driver.
> > > > > > >>
> > > > > > >> I performed these operations in directory /root/Intel*.
> > > > > > >>
> > > > > > >> I do not understand the suggestion "
> > > > > > >> /usr/src/kernels/2.6.18-1.2798.fc6-i686
> > > > > > >> This is
> the
> > > > > location
> > > > > > >> which you should specify for the compilation of Intel537.ko"
> > > > > > >> Where do I specify compilation location? Does the makefile
not
> do
> > > that?
> > > > > > >> If
> > > > > > >> so, does one go into and modify that
> > > > > > >> file? And is it correct that I will get no compilation until
> the
> > > cause
> > > > > of
> > > > > > >> the errors is corrected?
> > > > > > >>
> > > > > > >> In the 'readme' from Philippe Vouters there is in 1/ a
caution
> > > about
> > > > > the
> > > > > > >> CONFIG SMP definition.
> > > > > > >> I found the following references in the subdirectory- none of
> which
> > > I
> > > > > > >> understand:
> > > > > > >>
> > > > > > >> define CONFIG_X86_SMP1
> > > > > > >> define CONFIG_SUSPEND_SMP1
> > > > > > >> define CONFIG_X86_FIND_SMP_CONFIG 1
> > > > > > >> define CONFIG_SMP 1
> > > > > > >>
> > > > > > >> I do not know if this constitutes the definition mismatch in
> the
> > > > > caution.
> > > > > > >> Incidentally- I ran my FC6 install
> > > > > > >> using the option acpi=off. Hope this is not the cause of my
> > > problems.
> > > > > > >> Once again, thank you for your help- Marshall
> > > > > > >> ----- Original Message -----
> > > > > > >> From: "blann" <blann@xxxxxxxxxxx>
> > > > > > >> To: <blann@xxxxxxxxxxx>
> > > > > > >> Sent: Saturday, December 16, 2006 5:51 AM
> > > > > > >> Subject: Fw: FC6 install intel 537EP
> > > > > > >>
> > > > > > >>
> > > > > > >> >
> > > > > > >> > ----- Original Message -----
> > > > > > >> > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
> > > > > > >> > To: "blann" <blann@xxxxxxxxxxx>
> > > > > > >> > Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>
> > > > > > >> > Sent: Saturday, December 16, 2006 7:22 AM
> > > > > > >> > Subject: Re: FC6 install intel 537EP
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >> Blann
> > > > > > >> >>
> > > > > > >> >> kernel-headers are FileNames.h, in scripting language.
> > > > > > >> >> Some are installed to /usr/include/ and are called upon
by
> > > > > executable
> > > > > > >> >> files.
> > > > > > >> >>
> > > > > > >> >> kernel-source is multipotential, and can be used to
> generate a
> > > > > > >> >> varierty of distinct kernel+module sets, depending upon
the
> > > > > > >> >> configuration settings. The configuration of your kernel
is
> > > > > > >> >> /boot/config-2.6.18-1.2798.fc6
> > > > > > >> >>
> > > > > > >> >> This configuration was used to generate the LARGE set of
> > > filenames.h
> > > > > > >> >> set included in (Thanks Antonio)
> > > > > > >> >>
> > > > >
> > >
>
ftp://ftp.linux.ncsu.edu/pub/fedora/linux/core/6/i386/os/Fedora/RPMS/kernel-devel-2.6.18-1.2798.fc6.i686.rpm
> > > > > > >> >> It has ALL the header files which were assembled, prior to
> their
> > > > > > >> >> compilation into your kernel : vmlinuz-2.6.18-1.2798.fc6
> > > > > > >> >> If is also necessary to compile any add in drivers.
> > > > > > >> >>
> > > > > > >> >> After download this package can be installed with
> > > > > > >> >> # rpm -i ker*.rpm
> > > > > > >> >> and the resultant base folder will be:
> > > > > > >> >> /usr/src/kernels/2.6.18-1.2798.fc6-i686/
> > > > > > >> >> This is the location which you should specify for the
> > > compilation of
> > > > > > >> >> Intel537.ko
> > > > > > >> >> There likely is a symbolic link to this base folder:
> > > > > > >> >> /iib/modules/2.6.18-1.2798.fc6/build
> > > > > > >> >> which could be alternatively used (mostly I work under
> > > > > Debian/Ubuntu)
> > > > > > >> >>
> > > > > > >> >> MarvS
> > > > > > >> >>
> > > > > > >> >>
> > > > > > >> >>
> > > > > > >> >> On 12/16/06, blann <blann@xxxxxxxxxxx> wrote:
> > > > > > >> >>> I re-installed my FC6 OS to be sure that I had not
> corrupted it
> > > > > with
> > > > > > >> >>> my
> > > > > > >> >>> FC2
> > > > > > >> >>> driver attempt.
> > > > > > >> >>> I downloaded the intel-537EP_secure-2.60.80.1_09_2006.tgz
> file
> > > > > > >> >>> I checked my install log and found that I had installed
> kernel
> > > > > > >> >>> headers
> > > > > > >> >>> 2.6.18-1.2798.fc6
> > > > > > >> >>> and the same kernel source.
> > > > > > >> >>> After un-compressing the file, I checked that the readme
> file
> > > was
> > > > > > >> >>> essentially the same as downloaded earlier
> > > > > > >> >>> for the fc2 attempt.
> > > > > > >> >>>
> > > > > > >> >>> I do not understand the suggestion:" Make sure your
> computer
> > > has
> > > > > all
> > > > > > >> >>> the
> > > > > > >> >>> prerequisites.....and your /usr/src/kernel
> > > > > > >> >>> /'uname -r' /include/linux/aotoconf.h does match your
> processor
> > > > > > >> >>> configuration. With this , check especially for:
> > > > > > >> >>> $grep SMP /usr/src/kernels/'uname
> -r'/include/linux/autoconf.h
> > > for
> > > > > > >> >>> CONFIG_SMP defined whereas your computer only contains a
> single
> > > > > > >> >>> processor............... Sorry, don't understand these
> > > comments.
> > > > > > >> >>>
> > > > > > >> >>> I logged on as root, went to the directory where the
> untarred
> > > files
> > > > > > >> >>> were
> > > > > > >> >>> stored, gave the
> > > > > > >> >>> #make clean
> > > > > > >> >>> #export MODEM TYPE=537EP
> > > > > > >> >>> #make 537
> > > > > > >> >>>
> > > > > > >> >>> The following output resulted:
> > > > > > >> >>>
> > > > > > >> >>> rm -f /etc/hamregistry.bin
> > > > > > >> >>> bash 537_inst
> > > > > > >> >>> running kernel 2.618-1.2798.fc6
> > > > > > >> >>> installing hamregistry,used for persistent storage
> > > > > > >> >>> installing usrsound, a soft buzzer
> > > > > > >> >>> installing 537 module
> > > > > > >> >>> install: cannot stat 'Intel537.ko':no such file or
> directory
> > > > > > >> >>> make:***[install] Error1
> > > > > > >> >>>
> > > > > > >> >>> Instructions kindly sent by Philippe (I can't locate his
> return
> > > > > > >> >>> address)
> > > > > > >> >>> requested a file from running dmesg-
> > > > > > >> >>> if I understood- so I append the file. Please advise
how
> I
> > > might
> > > > > > >> >>> proceed-
> > > > > > >> >>> thanks-Marshall
> > > > > > >> >>>
> > > > > > >> >>>
> > > > > > >> >>>
> > > > > > >> >
> > > > > > >> >
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > --
> > > > Raheel Kaghzi
> > > > 92-333-7103250.
> > > >
> > >
> >
> >
> > --
> > --
> > Raheel Kaghzi
> > 92-333-7103250.
> >
>
--
--
Raheel Kaghzi
92-333-7103250.
--
--
Raheel Kaghzi
92-333-7103250.
