Raheel,
The compile is now proceeding, but there is some problem with your
particular kernel. I am leaving on 2 weeks travel tomorrow. Note that
http://downloadfinder.intel.com/scripts-df-external/filter_results.aspx?strTypes=all&ProductID=1230&OSFullName=Red+Hat*+Linux+9.0&lang=eng&strOSs=89&submit=Go%21
has drivers that may match your kernel. Blann can likely help with
later issues if you get a functional driver. Do copy messages to the
List for broader help.
MarvS
On 12/23/06, Raheel Kaghzi <raheelkaghzi@xxxxxxxxx> wrote:
> here are the details of new driver....18 dec 2006.
> looking forward to u.
> ----
> [root@myhost intel-537EP_secure-2.60.80.1]# ls
> 537_boot config_check hamregistry makefile usrsound
> 537_inst coredrv license.txt readme.txt
> [root@myhost intel-537EP_secure-2.60.80.1]# make clean
> cd coredrv; make clean
> make[1]: Entering directory `/root/intel-537EP_secure-2.60.80.1/coredrv'
> rm -f *.ko *.o .*.o.cmd *.mod.c *~ core .*.ko.cmd Modules.symvers
> rm -rf .tmp_versions
> make[1]: Leaving directory `/root/intel-537EP_secure-2.60.80.1/coredrv'
> rm -f *.o *.ko
> [root@myhost intel-537EP_secure-2.60.80.1]# export MODEM_TYPE=537
> [root@myhost intel-537EP_secure-2.60.80.1]# make 537
> Module precompile check
> Current running kernel is: 2.6.9-5.EL
> /lib/modules... autoconf.h exists
> diff: /boot/vmlinuz.autoconf.h: No such file or directory
> autoconf.h matches running kernel
> diff: /boot/vmlinuz.version.h: No such file or directory
> version.h matches running kernel
> 2.6.9-5.EL
> make[1]: Entering directory `/root/intel-537EP_secure-2.60.80.1/coredrv'
> make -C /lib/modules/2.6.9-5.EL/build
> SUBDIRS=/root/intel-537EP_secure-2.60.80.1/coredrv modules
> make[2]: Entering directory `/usr/src/kernels/2.6.9-5.EL-i686'
> CC [M] /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c: In function
> `send_data_to_user':
> /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:625: error:
> subscripted value is neither array nor pointer
> /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c: At top level:
> /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:707: warning:
> `MODULE_PARM_' is deprecated (declared at include/linux/module.h:552)
> make[3]: *** [/root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o] Error
1
> make[2]: *** [_module_/root/intel-537EP_secure-2.60.80.1/coredrv] Error 2
> make[2]: Leaving directory `/usr/src/kernels/2.6.9-5.EL-i686'
> make[1]: *** [537core_26] Error 2
> make[1]: Leaving directory `/root/intel-537EP_secure-2.60.80.1/coredrv'
> 2.6.9-5.EL
> Failed to build driver
> [root@myhost intel-537EP_secure-2.60.80.1]#
> regards.
> -----
>
> On 12/24/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> > Raheel,
> >
> > You should try the
> > intel-537EP_secure-2.60.80.1_18_12_2006.tgz 18-Dec-2006 14:17 1.5M
> > at
http://phep2.technion.ac.il/linmodems/packages/Intel/Philippe.Vouters/
> >
> > Something is broken in your copy of the intel-537-2.27.39.0 code
package,
> > because the script is just being displayed rather than executed.
> >
> > It should look like:
> > $ make clean
> > cd coredrv; make clean
> > make[1]: Entering directory
> > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > rm -f *.ko *.o .*.o.cmd *.mod.c *~ core .*.ko.cmd Modules.symvers
> > rm -rf .tmp_versions
> > make[1]: Leaving directory
> > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > rm -f *.o *.ko
> >
> > $ export MODEM_TYPE=537EP
> >
> > $ make 537
> > Module precompile check
> > Current running kernel is: 2.6.17.14-marv3
> > /lib/modules... autoconf.h exists
> > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > autoconf.h matches running kernel
> > diff: /boot/vmlinuz.version.h: No such file or directory
> > version.h matches running kernel
> > 2.6.17.14-marv3
> > make[1]: Entering directory
> > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > make -C /lib/modules/2.6.17.14-marv3/build
> > SUBDIRS=/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv modules
> > make[2]: Entering directory `/usr/src/linux-source-2.6.17'
> > CC [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > CC [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/clmmain.o
> > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/rts.o
> > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/task.o
> > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/uart.o
> > CC [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/wwh_dflt.o
> > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/locks.o
> > CC [M]
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_io.o
> > CC [M]
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_ioctl.o
> > CC [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial.o
> > CC [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/afedsp_int.o
> > LD [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.o
> > Building modules, stage 2.
> > MODPOST
> > WARNING: could not find
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/.537core.lib.cmd
> > for /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/537core.lib
> > CC
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.mod.o
> > LD [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.ko
> > make[2]: Leaving directory `/usr/src/linux-source-2.6.17'
> > make[1]: Leaving directory
> > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> >
> > The product is:
> > $ ls -l *.ko
> > -rw-r--r-- 1 marv marv 4217168 2006-12-23 14:54 Intel537.ko
> >
> >
> >
> > On 12/23/06, Raheel Kaghzi <raheelkaghzi@xxxxxxxxx> wrote:
> > > hello everybody,
> > > i was waiting for your help from last one month,but unable to
> > > succeeded with the modem intel 537EP driver installation,
> > > i have RHEL4,kernel 2.6.9-5EL ,i have tested all the drivers i ahve
> > > from linmodem and amigo website gave me and the intel drivers.
> > > facing problems.
> > > erorrs.............
> > > if someone think its a problem with the fat filesystem i ahve tried on
> > > the linux native filesystem and still the same problem,and also i have
> > > installed the required lib and source code, like kernel-devel,kernel
> > > sourse code,and other dependences..
> > > this is the only thing which stoping me using my linux and stuck to
> > > the Micro$oft and being the passive user..............................
> > > waiting for your help..............
> > >
> > >
> > > 537_boot config_check hamregistry license.txt readme.txt usrsound
> > > 537_inst coredrv inc makefile serialdrv
> > > [root@myhost intel-537-2.27.39.0]# make clean
> > > cd coredrv; make clean
> > > make[1]: Entering directory
> > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > rm -f *.o *~ core
> > > make[1]: Leaving directory
> > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > cd serialdrv; make clean
> > > make[1]: Entering directory
> > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > rm -f *.o *~ core
> > > make[1]: Leaving directory
> > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > rm -f *.o
> > > rm -f *.o
> > > [root@myhost intel-537-2.27.39.0]# export MODEM_TYPE=537
> > > [root@myhost intel-537-2.27.39.0]# make 537
> > > if [ -a /boot/vmlinuz.version.h ]; then \
> > > cp /boot/vmlinuz.version.h /lib/modules/`uname
> > > -r`/build/include/linux/version.h; fi
> > > if [ ]; then \
> > > cd coredrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH=
> > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
> > > cd ../serialdrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH=
> > > card=CARD_TJ320 \
> > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
> > > else \
> > > cd coredrv; make TARGET=TARGET_CATAWBA
> > > KERNEL_INCLUDES=/lib/modules/`uname -r`/build/include \
> > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
> > > cd ../serialdrv; make TARGET=TARGET_CATAWBA
> > > KERNEL_INCLUDES=/lib/modules/`uname -r`/build/include card=CARD_TJ320
> > > \
> > > "PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
> > > fi ;
> > > make[1]: Entering directory
> > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I
> > > /lib/modules/`uname -r`/build/include -I ../inc -fno-common -c -o
> > > coredrv.o coredrv.c
> > > In file included from
> > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:20,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
> > > from coredrv.c:34:
> > > /lib/modules/2.6.9-5.EL/build/include/asm/irq.h:16:25: irq_vectors.h:
> > > No such file or directory
> > > In file included from
> > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
> > > from coredrv.c:34:
> > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:70: error: `NR_IRQS'
> > > undeclared here (not in a function)
> > > In file included from
> > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:72,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
> > > from coredrv.c:34:
> > > /lib/modules/2.6.9-5.EL/build/include/asm/hw_irq.h:28: error:
> > > `NR_IRQ_VECTORS' undeclared here (not in a function)
> > > coredrv.c:73: warning: conflicting types for built-in function
'putchar'
> > > coredrv.c: In function `get_pci_info_537':
> > > coredrv.c:198: warning: return makes pointer from integer without a
cast
> > > coredrv.c: In function `open':
> > > coredrv.c:282: warning: passing arg 2 of `request_irq' from
> > > incompatible pointer type
> > > coredrv.c: In function `schedule_background_event':
> > > coredrv.c:462: warning: implicit declaration of function `queue_task'
> > > coredrv.c:462: error: structure has no member named `tqueue'
> > > coredrv.c:462: error: `tq_immediate' undeclared (first use in this
> > function)
> > > coredrv.c:462: error: (Each undeclared identifier is reported only
once
> > > coredrv.c:462: error: for each function it appears in.)
> > > coredrv.c:463: warning: implicit declaration of function `mark_bh'
> > > coredrv.c:463: error: `IMMEDIATE_BH' undeclared (first use in this
> > function)
> > > coredrv.c: At top level:
> > > coredrv.c:520: warning: `MODULE_PARM_' is deprecated (declared at
> > > /lib/modules/2.6.9-5.EL/build/include/linux/module.h:552)
> > > coredrv.c: In function `interruptible_sleep_on_persistReadQ':
> > > coredrv.c:635: warning: `interruptible_sleep_on' is deprecated
> > > (declared at /lib/modules/2.6.9-5.EL/build/include/linux/wait.h:290)
> > > make[1]: *** [coredrv.o] Error 1
> > > make[1]: Leaving directory
> > `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
> > > make[1]: Entering directory
> > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I
> > > /lib/modules/`uname -r`/build/include -I ../inc -fno-common -c -o
> > > softserial.o softserial.c
> > > In file included from
> > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:20,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > from softserial.h:55,
> > > from softserial.c:38:
> > > /lib/modules/2.6.9-5.EL/build/include/asm/irq.h:16:25: irq_vectors.h:
> > > No such file or directory
> > > In file included from
> > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > from softserial.h:55,
> > > from softserial.c:38:
> > > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:70: error: `NR_IRQS'
> > > undeclared here (not in a function)
> > > In file included from
> > /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:72,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
> > > from
> > > /lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
> > > from
> > /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
> > > from softserial.h:55,
> > > from softserial.c:38:
> > > /lib/modules/2.6.9-5.EL/build/include/asm/hw_irq.h:28: error:
> > > `NR_IRQ_VECTORS' undeclared here (not in a function)
> > > softserial.c: In function `init_module':
> > > softserial.c:60: warning: implicit declaration of function
`pci_present'
> > > softserial.c: In function `softserial_register_tty':
> > > softserial.c:99: warning: assignment makes integer from pointer
without a
> > cast
> > > softserial.c:100: error: structure has no member named `table'
> > > softserial.c: In function `softserial_open':
> > > softserial.c:161: error: `MOD_IN_USE' undeclared (first use in this
> > function)
> > > softserial.c:161: error: (Each undeclared identifier is reported only
once
> > > softserial.c:161: error: for each function it appears in.)
> > > softserial.c:163: error: `MOD_INC_USE_COUNT' undeclared (first use in
> > > this function)
> > > softserial.c:169: error: structure has no member named `device'
> > > softserial.c:169: error: request for member `minor_start' in something
> > > not a structure or union
> > > softserial.c:177: error: structure has no member named
`normal_termios'
> > > softserial.c:187: error: structure has no member named `tqueue'
> > > softserial.c:188: error: structure has no member named `tqueue'
> > > softserial.c:189: error: structure has no member named `session'
> > > softserial.c:189: error: structure has no member named `session'
> > > softserial.c:190: error: structure has no member named `pgrp'
> > > softserial.c:190: error: structure has no member named `pgrp'
> > > softserial.c:205: error: `MOD_DEC_USE_COUNT' undeclared (first use in
> > > this function)
> > > softserial.c: In function `softserial_close':
> > > softserial.c:222: error: `MOD_IN_USE' undeclared (first use in this
> > function)
> > > softserial.c:224: error: `MOD_DEC_USE_COUNT' undeclared (first use in
> > > this function)
> > > make[1]: *** [softserial.o] Error 1
> > > make[1]: Leaving directory
> > `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
> > > make: *** [537] Error 2
> > > [root@myhost intel-537-2.27.39.0]# vim modem compiling
> > > 2 files to edit
> > > [root@myhost intel-537-2.27.39.0]#
> > > regards.
> > >
> > > On 12/19/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> > > > Blann,
> > > >
> > > > The "make install" command does also include the "make"
> > > > I didn't want to continue through to the install component,
> > > > as I don't have the modem hardware on my System.
> > > >
> > > > Now that the driver is properly installed, try a test as root:
> > > > # wvdialconf wvtest
> > > > Which should find the modem through the /dev/modem --> link
> > > >
> > > > Edit in your personal info with:
> > > > # gedit wvtest
> > > > to a final form like that below. The try a dialout with:
> > > > # wvdial --config wvtest
> > > >
> > > > MarvS
> > > >
> > > > [Dialer Defaults]
> > > > Baud = 115200
> > > > Modem = /dev/537
> > > > Init1 = ATZ
> > > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > > > Modem Type = Analog Modem
> > > > Phone = 3015560020
> > > > ISDN = 0
> > > > Username = LoginName
> > > > Password = YourPassWord
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > On 12/18/06, blann <blann@xxxxxxxxxxx> wrote:
> > > > > I think I am moving forward:
> > > > > 1) used:
> > > > touch/usr/src/kernels/2.6.18-1.2798.fc6-i686/include/linux/config.h
> > > > > This was supposed to create an empty config.h file, since the make
> > failed
> > > > > due to missing file.
> > > > >
> > > > > I then did the make clean,export MODEM_TYPE=537EP, make 537, and
> > install.
> > > > > These were all done from the directory of the untarred intel
driver
> > > > > file.( I first tried moving the
> > > > > intel535.ko file to the /usr/src/kernels/2.6.18-1.2798.fc6-i686/
sub
> > > > > directory before
> > > > > issueing install, that did not work. Doing it over just using the
> > intel
> > > > > driver directory (as root),
> > > > > first issueing 'make clean', then after make 537 andafter the
'make
> > > > > install' the result is:
> > > > >
> > > > > rm -f /etc/hamregistry.bin
> > > > > bash 537_inst
> > > > > running kernel 2.6.18-1.2798.fc6
> > > > > installing hamregistry, used for....
> > > > > " usrsound, a soft...
> > > > > " 537 module
> > > > > install REDHAT 537 boot script and links
> > > > > starting modules and utilities
> > > > > done
> > > > >
> > > > > That sounds encouraging, tho some of the messages following the
'make
> > 537'
> > > > > command were unsettling .
> > > > > I tried the suggested tests:
> > > > > ls -l /dev/modem
> > > > > lrwxlrxrwx 1 root root 10 dec18 9:10 /dev/modem-> /dev/537
> > > > > ls -l /dev/537*
> > > > > crw-rw-rw- 1 root root 240, 1 dec 18 9:10 /dev/537
> > > > > crw------- 1 root root 240, 1 dec 18 9:10 /dev/5370
> > > > > (I note that I should change permission on the 5370 file, but
> > continued
> > > > > testing as root)
> > > > >
> > > > > So this looks encouraging to a neophyte; I next tried the wvdial
> > software
> > > > to
> > > > > try to connect; it hung up unable
> > > > > to make a connection. I must spend more time going over that
aspect.
> > It
> > > > did
> > > > > at one point say that it could
> > > > > not detect a modem.
> > > > >
> > > > > Does it seem from the installation output as tho the modem
> > installation
> > > > was
> > > > > a success? I did get a file intel537ko before
> > > > > issueing the 'install 537' command.
> > > > >
> > > > > Thanks for advising if my present problem is getting the system to
> > find
> > > > the
> > > > > driver, rather than the earlier step of
> > > > > producing the driver.
> > > > >
> > > > > Marshall
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
> > > > > To: "blann" <blann@xxxxxxxxxxx>
> > > > > Cc: <discuss@xxxxxxxxxxxxx>; "Philippe Vouters"
> > > > > <philippe.Vouters@xxxxxxxxxxx>
> > > > > Sent: Sunday, December 17, 2006 3:15 PM
> > > > > Subject: Re: Fw: FC6 install intel 537EP
> > > > >
> > > > >
> > > > > > Blann,
> > > > > >
> > > > > > RE: > This is the location which you should specify for the
> > > > > > compilation of Intel537.ko
> > > > > > ----------
> > > > > > No. The "make 537" process looks the kernel-headers needed to
unite
> > > > > > with the modem specific code in intel-537EP_secure-2.60.80.1/
> > > > > > An expected position tested is in folders named:
> > > > > > /usr/src/linux* or /usr/src/kernel* or through a symbolic
> > > > > > link:/ib/modules/kernel-version/build -->
> > > > > > as it may be located in diverse other places on diverse Systems.
> > > > > >
> > > > > > The /usr/src/kernels/kernel_version/ folder used by fedora is
an
> > > > > > innovation in using the intermediate /kernels/ folder. This
novelty
> > > > > > "Philippe Vouters" <philippe.Vouters@xxxxxxxxxxx> hasn't entered
> > into
> > > > > > the makefile search script yet. That is why you had to enter it
"by
> > > > > > hand".
> > > > > >
> > > > > > On my Ubuntu system with a 2.6.17 kernel, I ran:
> > > > > > /usr/src/modules/intel-537EP_secure-2.60.80.1$ make clean
> > > > > > Lacking Intel537 modem hardware the autodetect failed, so I
> > compensated
> > > > > > with:
> > > > > > $ export MODEM_TYPE=537EP
> > > > > > Then ran a successful compile with:
> > > > > > $ make 537
> > > > > > see details below. THe product is
> > > > > > $ ls -l *.ko
> > > > > > -rw-r--r-- 1 marv marv 4217168 2006-12-17 12:15 Intel537.ko
> > > > > >
> > > > > > On your system the compile failed at:
> > > > > > -----------------
> > > > > > make[2]: Entering directory
> > `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
> > > > > > CC [M] /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > > > > In file included from
> > > > > > /root/intel-537EP_secure-2.60.80.1/coredrv/hamcore.h:45,
> > > > > > from
> > > > > > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:33:
> > > > > > /root/intel-537EP_secure-2.60.80.1/coredrv/hamdefs.h:49:28:
error:
> > > > > > linux/config.h:
> > > > > > ----------------
> > > > > > On my system, this file is present at
> > > > > > /usr/src/linux-source-2.6.17/include/linux/config.h
> > > > > >
> > > > > > I did install the FC6 headers-devel package system (forcible)
onto
> > my
> > > > > > Ubuntu system:
> > > > > > /usr/src/kernels/2.6.18-1.2798.fc6-i686
> > > > > > and checked therein for include/linux/config.h
> > > > > > It is indeed missing, and that is why the compile failed on your
> > System.
> > > > > >
> > > > > > So this seems to be a FC6 bug, that is NOT resident in FC5
> > > > > > Because in a FC5 installation on my laptop, there is the
ounterpart
> > > > > > /usr/src/kernels/2.6.17-1.2187_FC5-i686/include/linux/config.h
> > > > > > and I have run the Intel537.ko therein successfully.
> > > > > >
> > > > > > Perhaps some of our Fedora experts will have a suggestion on how
to
> > > > > > manage the linux/config.h absense in FC6.
> > > > > >
> > > > > > MarvS
> > > > > >
> > > > > > $ make 537
> > > > > > Module precompile check
> > > > > > Current running kernel is: 2.6.17.13-marv2
> > > > > > /lib/modules... autoconf.h exists
> > > > > > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > > > > > autoconf.h matches running kernel
> > > > > > diff: /boot/vmlinuz.version.h: No such file or directory
> > > > > > version.h matches running kernel
> > > > > > 2.6.17.13-marv2
> > > > > > make[1]: Entering directory
> > > > > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > > > > make -C /lib/modules/2.6.17.13-marv2/build
> > > > > > SUBDIRS=/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv
> > modules
> > > > > > make[2]: Entering directory `/usr/src/linux-source-2.6.17'
> > > > > > CC [M]
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > > > > CC [M]
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/clmmain.o
> > > > > > CC [M]
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/rts.o
> > > > > > CC [M]
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/task.o
> > > > > > CC [M]
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/uart.o
> > > > > > CC [M]
> > > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/wwh_dflt.o
> > > > > > CC [M]
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/locks.o
> > > > > > CC [M]
> > > > > >
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_io.o
> > > > > > CC [M]
> > > > > >
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_ioctl.o
> > > > > > CC [M]
> > > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial.o
> > > > > > CC [M]
> > > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/afedsp_int.o
> > > > > > LD [M]
> > > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.o
> > > > > > Building modules, stage 2.
> > > > > > MODPOST
> > > > > > WARNING: could not find
> > > > > >
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/.537core.lib.cmd
> > > > > > for
> > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/537core.lib
> > > > > > CC
> > > > > >
/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.mod.o
> > > > > > LD [M]
> > > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.ko
> > > > > > make[2]: Leaving directory `/usr/src/linux-source-2.6.17'
> > > > > > make[1]: Leaving directory
> > > > > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > > > >
> > > > > >
> > > > > > On 12/17/06, blann <blann@xxxxxxxxxxx> wrote:
> > > > > >>
> > > > > >> Thanks for last suggestions. Downloaded the kernel-devel
package
> > and
> > > > > >> tried
> > > > > >> the installation,
> > > > > >> only to get an 'already installed' message- so did not proceed
> > further
> > > > on
> > > > > >> that tack.
> > > > > >> I tried, starting with 'make clean', the installation again
logged
> > in
> > > > as
> > > > > >> root, and using the # export MODEM_TYPE= 537EP
> > > > > >> before the ' make 537'. I append the output which indicates a
> > failure
> > > > to
> > > > > >> compile the driver.
> > > > > >>
> > > > > >> I performed these operations in directory /root/Intel*.
> > > > > >>
> > > > > >> I do not understand the suggestion "
> > > > > >> /usr/src/kernels/2.6.18-1.2798.fc6-i686
> > > > > >> This is
the
> > > > location
> > > > > >> which you should specify for the compilation of Intel537.ko"
> > > > > >> Where do I specify compilation location? Does the makefile not
do
> > that?
> > > > > >> If
> > > > > >> so, does one go into and modify that
> > > > > >> file? And is it correct that I will get no compilation until
the
> > cause
> > > > of
> > > > > >> the errors is corrected?
> > > > > >>
> > > > > >> In the 'readme' from Philippe Vouters there is in 1/ a caution
> > about
> > > > the
> > > > > >> CONFIG SMP definition.
> > > > > >> I found the following references in the subdirectory- none of
which
> > I
> > > > > >> understand:
> > > > > >>
> > > > > >> define CONFIG_X86_SMP1
> > > > > >> define CONFIG_SUSPEND_SMP1
> > > > > >> define CONFIG_X86_FIND_SMP_CONFIG 1
> > > > > >> define CONFIG_SMP 1
> > > > > >>
> > > > > >> I do not know if this constitutes the definition mismatch in
the
> > > > caution.
> > > > > >> Incidentally- I ran my FC6 install
> > > > > >> using the option acpi=off. Hope this is not the cause of my
> > problems.
> > > > > >> Once again, thank you for your help- Marshall
> > > > > >> ----- Original Message -----
> > > > > >> From: "blann" <blann@xxxxxxxxxxx>
> > > > > >> To: <blann@xxxxxxxxxxx>
> > > > > >> Sent: Saturday, December 16, 2006 5:51 AM
> > > > > >> Subject: Fw: FC6 install intel 537EP
> > > > > >>
> > > > > >>
> > > > > >> >
> > > > > >> > ----- Original Message -----
> > > > > >> > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
> > > > > >> > To: "blann" <blann@xxxxxxxxxxx>
> > > > > >> > Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>
> > > > > >> > Sent: Saturday, December 16, 2006 7:22 AM
> > > > > >> > Subject: Re: FC6 install intel 537EP
> > > > > >> >
> > > > > >> >
> > > > > >> >> Blann
> > > > > >> >>
> > > > > >> >> kernel-headers are FileNames.h, in scripting language.
> > > > > >> >> Some are installed to /usr/include/ and are called upon by
> > > > executable
> > > > > >> >> files.
> > > > > >> >>
> > > > > >> >> kernel-source is multipotential, and can be used to
generate a
> > > > > >> >> varierty of distinct kernel+module sets, depending upon the
> > > > > >> >> configuration settings. The configuration of your kernel is
> > > > > >> >> /boot/config-2.6.18-1.2798.fc6
> > > > > >> >>
> > > > > >> >> This configuration was used to generate the LARGE set of
> > filenames.h
> > > > > >> >> set included in (Thanks Antonio)
> > > > > >> >>
> > > >
> >
ftp://ftp.linux.ncsu.edu/pub/fedora/linux/core/6/i386/os/Fedora/RPMS/kernel-devel-2.6.18-1.2798.fc6.i686.rpm
> > > > > >> >> It has ALL the header files which were assembled, prior to
their
> > > > > >> >> compilation into your kernel : vmlinuz-2.6.18-1.2798.fc6
> > > > > >> >> If is also necessary to compile any add in drivers.
> > > > > >> >>
> > > > > >> >> After download this package can be installed with
> > > > > >> >> # rpm -i ker*.rpm
> > > > > >> >> and the resultant base folder will be:
> > > > > >> >> /usr/src/kernels/2.6.18-1.2798.fc6-i686/
> > > > > >> >> This is the location which you should specify for the
> > compilation of
> > > > > >> >> Intel537.ko
> > > > > >> >> There likely is a symbolic link to this base folder:
> > > > > >> >> /iib/modules/2.6.18-1.2798.fc6/build
> > > > > >> >> which could be alternatively used (mostly I work under
> > > > Debian/Ubuntu)
> > > > > >> >>
> > > > > >> >> MarvS
> > > > > >> >>
> > > > > >> >>
> > > > > >> >>
> > > > > >> >> On 12/16/06, blann <blann@xxxxxxxxxxx> wrote:
> > > > > >> >>> I re-installed my FC6 OS to be sure that I had not
corrupted it
> > > > with
> > > > > >> >>> my
> > > > > >> >>> FC2
> > > > > >> >>> driver attempt.
> > > > > >> >>> I downloaded the intel-537EP_secure-2.60.80.1_09_2006.tgz
file
> > > > > >> >>> I checked my install log and found that I had installed
kernel
> > > > > >> >>> headers
> > > > > >> >>> 2.6.18-1.2798.fc6
> > > > > >> >>> and the same kernel source.
> > > > > >> >>> After un-compressing the file, I checked that the readme
file
> > was
> > > > > >> >>> essentially the same as downloaded earlier
> > > > > >> >>> for the fc2 attempt.
> > > > > >> >>>
> > > > > >> >>> I do not understand the suggestion:" Make sure your
computer
> > has
> > > > all
> > > > > >> >>> the
> > > > > >> >>> prerequisites.....and your /usr/src/kernel
> > > > > >> >>> /'uname -r' /include/linux/aotoconf.h does match your
processor
> > > > > >> >>> configuration. With this , check especially for:
> > > > > >> >>> $grep SMP /usr/src/kernels/'uname
-r'/include/linux/autoconf.h
> > for
> > > > > >> >>> CONFIG_SMP defined whereas your computer only contains a
single
> > > > > >> >>> processor............... Sorry, don't understand these
> > comments.
> > > > > >> >>>
> > > > > >> >>> I logged on as root, went to the directory where the
untarred
> > files
> > > > > >> >>> were
> > > > > >> >>> stored, gave the
> > > > > >> >>> #make clean
> > > > > >> >>> #export MODEM TYPE=537EP
> > > > > >> >>> #make 537
> > > > > >> >>>
> > > > > >> >>> The following output resulted:
> > > > > >> >>>
> > > > > >> >>> rm -f /etc/hamregistry.bin
> > > > > >> >>> bash 537_inst
> > > > > >> >>> running kernel 2.618-1.2798.fc6
> > > > > >> >>> installing hamregistry,used for persistent storage
> > > > > >> >>> installing usrsound, a soft buzzer
> > > > > >> >>> installing 537 module
> > > > > >> >>> install: cannot stat 'Intel537.ko':no such file or
directory
> > > > > >> >>> make:***[install] Error1
> > > > > >> >>>
> > > > > >> >>> Instructions kindly sent by Philippe (I can't locate his
return
> > > > > >> >>> address)
> > > > > >> >>> requested a file from running dmesg-
> > > > > >> >>> if I understood- so I append the file. Please advise how
I
> > might
> > > > > >> >>> proceed-
> > > > > >> >>> thanks-Marshall
> > > > > >> >>>
> > > > > >> >>>
> > > > > >> >>>
> > > > > >> >
> > > > > >> >
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > > --
> > > --
> > > Raheel Kaghzi
> > > 92-333-7103250.
> > >
> >
>
>
> --
> --
> Raheel Kaghzi
> 92-333-7103250.
>
