hello everybody,
i was waiting for your help from last one month,but unable to
succeeded with the modem intel 537EP driver installation,
i have RHEL4,kernel 2.6.9-5EL ,i have tested all the drivers i ahve
from linmodem and amigo website gave me and the intel drivers.
facing problems.
erorrs.............
if someone think its a problem with the fat filesystem i ahve tried on
the linux native filesystem and still the same problem,and also i have
installed the required lib and source code, like kernel-devel,kernel
sourse code,and other dependences..
this is the only thing which stoping me using my linux and stuck to
the Micro$oft and being the passive user..............................
waiting for your help..............
537_boot config_check hamregistry license.txt readme.txt usrsound
537_inst coredrv inc makefile serialdrv
[root@myhost intel-537-2.27.39.0]# make clean
cd coredrv; make clean
make[1]: Entering directory `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
rm -f *.o *~ core
make[1]: Leaving directory `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
cd serialdrv; make clean
make[1]: Entering directory `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
rm -f *.o *~ core
make[1]: Leaving directory `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
rm -f *.o
rm -f *.o
[root@myhost intel-537-2.27.39.0]# export MODEM_TYPE=537
[root@myhost intel-537-2.27.39.0]# make 537
if [ -a /boot/vmlinuz.version.h ]; then \
cp /boot/vmlinuz.version.h /lib/modules/`uname
-r`/build/include/linux/version.h; fi
if [ ]; then \
cd coredrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH=
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
cd ../serialdrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH=
card=CARD_TJ320 \
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
else \
cd coredrv; make TARGET=TARGET_CATAWBA
KERNEL_INCLUDES=/lib/modules/`uname -r`/build/include \
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
cd ../serialdrv; make TARGET=TARGET_CATAWBA
KERNEL_INCLUDES=/lib/modules/`uname -r`/build/include card=CARD_TJ320
\
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
fi ;
make[1]: Entering directory `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I
/lib/modules/`uname -r`/build/include -I ../inc -fno-common -c -o
coredrv.o coredrv.c
In file included from /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:20,
from /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
from coredrv.c:34:
/lib/modules/2.6.9-5.EL/build/include/asm/irq.h:16:25: irq_vectors.h:
No such file or directory
In file included from /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
from coredrv.c:34:
/lib/modules/2.6.9-5.EL/build/include/linux/irq.h:70: error: `NR_IRQS'
undeclared here (not in a function)
In file included from /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:72,
from /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/delay.h:13,
from coredrv.c:34:
/lib/modules/2.6.9-5.EL/build/include/asm/hw_irq.h:28: error:
`NR_IRQ_VECTORS' undeclared here (not in a function)
coredrv.c:73: warning: conflicting types for built-in function 'putchar'
coredrv.c: In function `get_pci_info_537':
coredrv.c:198: warning: return makes pointer from integer without a cast
coredrv.c: In function `open':
coredrv.c:282: warning: passing arg 2 of `request_irq' from
incompatible pointer type
coredrv.c: In function `schedule_background_event':
coredrv.c:462: warning: implicit declaration of function `queue_task'
coredrv.c:462: error: structure has no member named `tqueue'
coredrv.c:462: error: `tq_immediate' undeclared (first use in this function)
coredrv.c:462: error: (Each undeclared identifier is reported only once
coredrv.c:462: error: for each function it appears in.)
coredrv.c:463: warning: implicit declaration of function `mark_bh'
coredrv.c:463: error: `IMMEDIATE_BH' undeclared (first use in this function)
coredrv.c: At top level:
coredrv.c:520: warning: `MODULE_PARM_' is deprecated (declared at
/lib/modules/2.6.9-5.EL/build/include/linux/module.h:552)
coredrv.c: In function `interruptible_sleep_on_persistReadQ':
coredrv.c:635: warning: `interruptible_sleep_on' is deprecated
(declared at /lib/modules/2.6.9-5.EL/build/include/linux/wait.h:290)
make[1]: *** [coredrv.o] Error 1
make[1]: Leaving directory `/mnt/vfat/Downloads/intel-537-2.27.39.0/coredrv'
make[1]: Entering directory `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I
/lib/modules/`uname -r`/build/include -I ../inc -fno-common -c -o
softserial.o softserial.c
In file included from /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:20,
from /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
from
/lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
from /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
from softserial.h:55,
from softserial.c:38:
/lib/modules/2.6.9-5.EL/build/include/asm/irq.h:16:25: irq_vectors.h:
No such file or directory
In file included from /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
from
/lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
from /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
from softserial.h:55,
from softserial.c:38:
/lib/modules/2.6.9-5.EL/build/include/linux/irq.h:70: error: `NR_IRQS'
undeclared here (not in a function)
In file included from /lib/modules/2.6.9-5.EL/build/include/linux/irq.h:72,
from /lib/modules/2.6.9-5.EL/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-5.EL/build/include/linux/hardirq.h:6,
from
/lib/modules/2.6.9-5.EL/build/include/linux/interrupt.h:11,
from /lib/modules/2.6.9-5.EL/build/include/linux/serialP.h:26,
from softserial.h:55,
from softserial.c:38:
/lib/modules/2.6.9-5.EL/build/include/asm/hw_irq.h:28: error:
`NR_IRQ_VECTORS' undeclared here (not in a function)
softserial.c: In function `init_module':
softserial.c:60: warning: implicit declaration of function `pci_present'
softserial.c: In function `softserial_register_tty':
softserial.c:99: warning: assignment makes integer from pointer without a cast
softserial.c:100: error: structure has no member named `table'
softserial.c: In function `softserial_open':
softserial.c:161: error: `MOD_IN_USE' undeclared (first use in this function)
softserial.c:161: error: (Each undeclared identifier is reported only once
softserial.c:161: error: for each function it appears in.)
softserial.c:163: error: `MOD_INC_USE_COUNT' undeclared (first use in
this function)
softserial.c:169: error: structure has no member named `device'
softserial.c:169: error: request for member `minor_start' in something
not a structure or union
softserial.c:177: error: structure has no member named `normal_termios'
softserial.c:187: error: structure has no member named `tqueue'
softserial.c:188: error: structure has no member named `tqueue'
softserial.c:189: error: structure has no member named `session'
softserial.c:189: error: structure has no member named `session'
softserial.c:190: error: structure has no member named `pgrp'
softserial.c:190: error: structure has no member named `pgrp'
softserial.c:205: error: `MOD_DEC_USE_COUNT' undeclared (first use in
this function)
softserial.c: In function `softserial_close':
softserial.c:222: error: `MOD_IN_USE' undeclared (first use in this function)
softserial.c:224: error: `MOD_DEC_USE_COUNT' undeclared (first use in
this function)
make[1]: *** [softserial.o] Error 1
make[1]: Leaving directory `/mnt/vfat/Downloads/intel-537-2.27.39.0/serialdrv'
make: *** [537] Error 2
[root@myhost intel-537-2.27.39.0]# vim modem compiling
2 files to edit
[root@myhost intel-537-2.27.39.0]#
regards.
On 12/19/06, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> Blann,
>
> The "make install" command does also include the "make"
> I didn't want to continue through to the install component,
> as I don't have the modem hardware on my System.
>
> Now that the driver is properly installed, try a test as root:
> # wvdialconf wvtest
> Which should find the modem through the /dev/modem --> link
>
> Edit in your personal info with:
> # gedit wvtest
> to a final form like that below. The try a dialout with:
> # wvdial --config wvtest
>
> MarvS
>
> [Dialer Defaults]
> Baud = 115200
> Modem = /dev/537
> Init1 = ATZ
> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> Modem Type = Analog Modem
> Phone = 3015560020
> ISDN = 0
> Username = LoginName
> Password = YourPassWord
>
>
>
>
>
>
> On 12/18/06, blann <blann@xxxxxxxxxxx> wrote:
> > I think I am moving forward:
> > 1) used:
> touch/usr/src/kernels/2.6.18-1.2798.fc6-i686/include/linux/config.h
> > This was supposed to create an empty config.h file, since the make failed
> > due to missing file.
> >
> > I then did the make clean,export MODEM_TYPE=537EP, make 537, and install.
> > These were all done from the directory of the untarred intel driver
> > file.( I first tried moving the
> > intel535.ko file to the /usr/src/kernels/2.6.18-1.2798.fc6-i686/ sub
> > directory before
> > issueing install, that did not work. Doing it over just using the intel
> > driver directory (as root),
> > first issueing 'make clean', then after make 537 andafter the 'make
> > install' the result is:
> >
> > rm -f /etc/hamregistry.bin
> > bash 537_inst
> > running kernel 2.6.18-1.2798.fc6
> > installing hamregistry, used for....
> > " usrsound, a soft...
> > " 537 module
> > install REDHAT 537 boot script and links
> > starting modules and utilities
> > done
> >
> > That sounds encouraging, tho some of the messages following the 'make 537'
> > command were unsettling .
> > I tried the suggested tests:
> > ls -l /dev/modem
> > lrwxlrxrwx 1 root root 10 dec18 9:10 /dev/modem-> /dev/537
> > ls -l /dev/537*
> > crw-rw-rw- 1 root root 240, 1 dec 18 9:10 /dev/537
> > crw------- 1 root root 240, 1 dec 18 9:10 /dev/5370
> > (I note that I should change permission on the 5370 file, but continued
> > testing as root)
> >
> > So this looks encouraging to a neophyte; I next tried the wvdial software
> to
> > try to connect; it hung up unable
> > to make a connection. I must spend more time going over that aspect. It
> did
> > at one point say that it could
> > not detect a modem.
> >
> > Does it seem from the installation output as tho the modem installation
> was
> > a success? I did get a file intel537ko before
> > issueing the 'install 537' command.
> >
> > Thanks for advising if my present problem is getting the system to find
> the
> > driver, rather than the earlier step of
> > producing the driver.
> >
> > Marshall
> >
> > ----- Original Message -----
> > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
> > To: "blann" <blann@xxxxxxxxxxx>
> > Cc: <discuss@xxxxxxxxxxxxx>; "Philippe Vouters"
> > <philippe.Vouters@xxxxxxxxxxx>
> > Sent: Sunday, December 17, 2006 3:15 PM
> > Subject: Re: Fw: FC6 install intel 537EP
> >
> >
> > > Blann,
> > >
> > > RE: > This is the location which you should specify for the
> > > compilation of Intel537.ko
> > > ----------
> > > No. The "make 537" process looks the kernel-headers needed to unite
> > > with the modem specific code in intel-537EP_secure-2.60.80.1/
> > > An expected position tested is in folders named:
> > > /usr/src/linux* or /usr/src/kernel* or through a symbolic
> > > link:/ib/modules/kernel-version/build -->
> > > as it may be located in diverse other places on diverse Systems.
> > >
> > > The /usr/src/kernels/kernel_version/ folder used by fedora is an
> > > innovation in using the intermediate /kernels/ folder. This novelty
> > > "Philippe Vouters" <philippe.Vouters@xxxxxxxxxxx> hasn't entered into
> > > the makefile search script yet. That is why you had to enter it "by
> > > hand".
> > >
> > > On my Ubuntu system with a 2.6.17 kernel, I ran:
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1$ make clean
> > > Lacking Intel537 modem hardware the autodetect failed, so I compensated
> > > with:
> > > $ export MODEM_TYPE=537EP
> > > Then ran a successful compile with:
> > > $ make 537
> > > see details below. THe product is
> > > $ ls -l *.ko
> > > -rw-r--r-- 1 marv marv 4217168 2006-12-17 12:15 Intel537.ko
> > >
> > > On your system the compile failed at:
> > > -----------------
> > > make[2]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
> > > CC [M] /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > In file included from
> > > /root/intel-537EP_secure-2.60.80.1/coredrv/hamcore.h:45,
> > > from
> > > /root/intel-537EP_secure-2.60.80.1/coredrv/coredrv.c:33:
> > > /root/intel-537EP_secure-2.60.80.1/coredrv/hamdefs.h:49:28: error:
> > > linux/config.h:
> > > ----------------
> > > On my system, this file is present at
> > > /usr/src/linux-source-2.6.17/include/linux/config.h
> > >
> > > I did install the FC6 headers-devel package system (forcible) onto my
> > > Ubuntu system:
> > > /usr/src/kernels/2.6.18-1.2798.fc6-i686
> > > and checked therein for include/linux/config.h
> > > It is indeed missing, and that is why the compile failed on your System.
> > >
> > > So this seems to be a FC6 bug, that is NOT resident in FC5
> > > Because in a FC5 installation on my laptop, there is the ounterpart
> > > /usr/src/kernels/2.6.17-1.2187_FC5-i686/include/linux/config.h
> > > and I have run the Intel537.ko therein successfully.
> > >
> > > Perhaps some of our Fedora experts will have a suggestion on how to
> > > manage the linux/config.h absense in FC6.
> > >
> > > MarvS
> > >
> > > $ make 537
> > > Module precompile check
> > > Current running kernel is: 2.6.17.13-marv2
> > > /lib/modules... autoconf.h exists
> > > diff: /boot/vmlinuz.autoconf.h: No such file or directory
> > > autoconf.h matches running kernel
> > > diff: /boot/vmlinuz.version.h: No such file or directory
> > > version.h matches running kernel
> > > 2.6.17.13-marv2
> > > make[1]: Entering directory
> > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > > make -C /lib/modules/2.6.17.13-marv2/build
> > > SUBDIRS=/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv modules
> > > make[2]: Entering directory `/usr/src/linux-source-2.6.17'
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/coredrv.o
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/clmmain.o
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/rts.o
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/task.o
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/uart.o
> > > CC [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/wwh_dflt.o
> > > CC [M] /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/locks.o
> > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_io.o
> > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial_ioctl.o
> > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/softserial.o
> > > CC [M]
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/afedsp_int.o
> > > LD [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.o
> > > Building modules, stage 2.
> > > MODPOST
> > > WARNING: could not find
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/.537core.lib.cmd
> > > for /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/537core.lib
> > > CC
> > > /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.mod.o
> > > LD [M]
> /usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv/Intel537.ko
> > > make[2]: Leaving directory `/usr/src/linux-source-2.6.17'
> > > make[1]: Leaving directory
> > > `/usr/src/modules/intel-537EP_secure-2.60.80.1/coredrv'
> > >
> > >
> > > On 12/17/06, blann <blann@xxxxxxxxxxx> wrote:
> > >>
> > >> Thanks for last suggestions. Downloaded the kernel-devel package and
> > >> tried
> > >> the installation,
> > >> only to get an 'already installed' message- so did not proceed further
> on
> > >> that tack.
> > >> I tried, starting with 'make clean', the installation again logged in
> as
> > >> root, and using the # export MODEM_TYPE= 537EP
> > >> before the ' make 537'. I append the output which indicates a failure
> to
> > >> compile the driver.
> > >>
> > >> I performed these operations in directory /root/Intel*.
> > >>
> > >> I do not understand the suggestion "
> > >> /usr/src/kernels/2.6.18-1.2798.fc6-i686
> > >> This is the
> location
> > >> which you should specify for the compilation of Intel537.ko"
> > >> Where do I specify compilation location? Does the makefile not do that?
> > >> If
> > >> so, does one go into and modify that
> > >> file? And is it correct that I will get no compilation until the cause
> of
> > >> the errors is corrected?
> > >>
> > >> In the 'readme' from Philippe Vouters there is in 1/ a caution about
> the
> > >> CONFIG SMP definition.
> > >> I found the following references in the subdirectory- none of which I
> > >> understand:
> > >>
> > >> define CONFIG_X86_SMP1
> > >> define CONFIG_SUSPEND_SMP1
> > >> define CONFIG_X86_FIND_SMP_CONFIG 1
> > >> define CONFIG_SMP 1
> > >>
> > >> I do not know if this constitutes the definition mismatch in the
> caution.
> > >> Incidentally- I ran my FC6 install
> > >> using the option acpi=off. Hope this is not the cause of my problems.
> > >> Once again, thank you for your help- Marshall
> > >> ----- Original Message -----
> > >> From: "blann" <blann@xxxxxxxxxxx>
> > >> To: <blann@xxxxxxxxxxx>
> > >> Sent: Saturday, December 16, 2006 5:51 AM
> > >> Subject: Fw: FC6 install intel 537EP
> > >>
> > >>
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>
> > >> > To: "blann" <blann@xxxxxxxxxxx>
> > >> > Cc: "Linmodems" <discuss@xxxxxxxxxxxxx>
> > >> > Sent: Saturday, December 16, 2006 7:22 AM
> > >> > Subject: Re: FC6 install intel 537EP
> > >> >
> > >> >
> > >> >> Blann
> > >> >>
> > >> >> kernel-headers are FileNames.h, in scripting language.
> > >> >> Some are installed to /usr/include/ and are called upon by
> executable
> > >> >> files.
> > >> >>
> > >> >> kernel-source is multipotential, and can be used to generate a
> > >> >> varierty of distinct kernel+module sets, depending upon the
> > >> >> configuration settings. The configuration of your kernel is
> > >> >> /boot/config-2.6.18-1.2798.fc6
> > >> >>
> > >> >> This configuration was used to generate the LARGE set of filenames.h
> > >> >> set included in (Thanks Antonio)
> > >> >>
> ftp://ftp.linux.ncsu.edu/pub/fedora/linux/core/6/i386/os/Fedora/RPMS/kernel-devel-2.6.18-1.2798.fc6.i686.rpm
> > >> >> It has ALL the header files which were assembled, prior to their
> > >> >> compilation into your kernel : vmlinuz-2.6.18-1.2798.fc6
> > >> >> If is also necessary to compile any add in drivers.
> > >> >>
> > >> >> After download this package can be installed with
> > >> >> # rpm -i ker*.rpm
> > >> >> and the resultant base folder will be:
> > >> >> /usr/src/kernels/2.6.18-1.2798.fc6-i686/
> > >> >> This is the location which you should specify for the compilation of
> > >> >> Intel537.ko
> > >> >> There likely is a symbolic link to this base folder:
> > >> >> /iib/modules/2.6.18-1.2798.fc6/build
> > >> >> which could be alternatively used (mostly I work under
> Debian/Ubuntu)
> > >> >>
> > >> >> MarvS
> > >> >>
> > >> >>
> > >> >>
> > >> >> On 12/16/06, blann <blann@xxxxxxxxxxx> wrote:
> > >> >>> I re-installed my FC6 OS to be sure that I had not corrupted it
> with
> > >> >>> my
> > >> >>> FC2
> > >> >>> driver attempt.
> > >> >>> I downloaded the intel-537EP_secure-2.60.80.1_09_2006.tgz file
> > >> >>> I checked my install log and found that I had installed kernel
> > >> >>> headers
> > >> >>> 2.6.18-1.2798.fc6
> > >> >>> and the same kernel source.
> > >> >>> After un-compressing the file, I checked that the readme file was
> > >> >>> essentially the same as downloaded earlier
> > >> >>> for the fc2 attempt.
> > >> >>>
> > >> >>> I do not understand the suggestion:" Make sure your computer has
> all
> > >> >>> the
> > >> >>> prerequisites.....and your /usr/src/kernel
> > >> >>> /'uname -r' /include/linux/aotoconf.h does match your processor
> > >> >>> configuration. With this , check especially for:
> > >> >>> $grep SMP /usr/src/kernels/'uname -r'/include/linux/autoconf.h for
> > >> >>> CONFIG_SMP defined whereas your computer only contains a single
> > >> >>> processor............... Sorry, don't understand these comments.
> > >> >>>
> > >> >>> I logged on as root, went to the directory where the untarred files
> > >> >>> were
> > >> >>> stored, gave the
> > >> >>> #make clean
> > >> >>> #export MODEM TYPE=537EP
> > >> >>> #make 537
> > >> >>>
> > >> >>> The following output resulted:
> > >> >>>
> > >> >>> rm -f /etc/hamregistry.bin
> > >> >>> bash 537_inst
> > >> >>> running kernel 2.618-1.2798.fc6
> > >> >>> installing hamregistry,used for persistent storage
> > >> >>> installing usrsound, a soft buzzer
> > >> >>> installing 537 module
> > >> >>> install: cannot stat 'Intel537.ko':no such file or directory
> > >> >>> make:***[install] Error1
> > >> >>>
> > >> >>> Instructions kindly sent by Philippe (I can't locate his return
> > >> >>> address)
> > >> >>> requested a file from running dmesg-
> > >> >>> if I understood- so I append the file. Please advise how I might
> > >> >>> proceed-
> > >> >>> thanks-Marshall
> > >> >>>
> > >> >>>
> > >> >>>
> > >> >
> > >> >
> > >>
> > >>
> > >>
> > >
> >
> >
> >
>
--
--
Raheel Kaghzi
92-333-7103250.
