Hi Grant,
You were right, the usb modem mehtod was just a way for me to see how
usb modems works in linux, u basicly add new firmware and load the
driver and it sees your usb modem also as a ethernet device and u use
pppd with that :-)
Im trying your option below to get increased upload, but no luck yet
from your ascii , mine looks similar
+--------+ +--------+
+--------+ | ...245.18 +-----| ...77.1 | +------+
| ...0.x +-----+ ...0.1 | | COLO +-----+ 101.x |
+--------+ + ...245.19 +-----| ...78.1 | +------+
|--------+ +--------+
the background how I got this setup is that 245.18 and 19 has pppoe
into my ISP, then I made a pptp tunnel to COLO on 2 diffrent ips and
got my new ips which is 245.18 Ptp 77.1 and 245.19 Ptp 78.1.
All this works fine, I've even add multiple routes to 101.x via dev
ppp0 nexthop dev ppp1, but this just load balances the links, not
increase uploads
Is it possible at all to route all upload via both links at the same
time, maybe disable the cached routes, let it just change routes the
whole time?
Thanks agian for your help
Sew
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
