On Wednesday 15 October 2003 11:18, rAcHeL ^cY wrote:
> Dear all,
>
> I have run cbq on my network to control both incoming and outgoing traffic.
> I have my redhat with two network interface installed, eth0 (LAN interface)
> and eth1 (WAN interface). As for my current configuration is, outgoing
> traffic controlled on eth1 and incoming will be controll on eth0.
>
> But then my upload link started to slow down badly, which i have no idea
> why this happen, can anyone help on this?
Try to install a traffic monitor to find out what's using your link. Do you
have the same problem if you delete the tc setup?
Stef
--
stef.coene@xxxxxxxxx
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
