Hello there,
I've already posted st similar, but anyway...
can anyone tell me, why the following setup
tc qdisc add dev eth0 root handle 1: htb r2q 5
tc class add dev eth0 parent 1: classid 1:1 htb rate 512kbit ceil
512kbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate
64kbit ceil 512kbit tc class add dev eth0 parent 1:1 classid 1:11
htb rate 256kbit ceil 512kbit
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
match ip dst 195.28.103.7 flowid 1:10
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
match ip dst 195.28.103.5 flowid 1:11
doesn't distribute the excess bw in proportion of allocated bw?
Ratio I expect is 64/256, but I get some 1/2.1 or similar. This
varies according to r2q, but anyway it never gets close to 1/4.
kernel 2.4.21, htb 3.12, but also tested on 2.4.18, htb 3.6 with
similar results...
Can anyone try this setup?
Thanks, Tom
--
Potrebujete vice prostoru pro vase stranky?
Ptejte se na http://sluzby.volny.cz/cs/product/ftp_paid
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
