Re: IMQ problem

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 09 September 2003 08:29, michal@xxxxxxxx wrote:
> Hi,
> I tried to make IMQ device to work... So I patched the kernel, patched
> iptables, made all the stuff, boot to new kernel was ok, module imq was
> there and it was ok to load it and 'ip link imq0 up' also worked and imq0
> was present in ifconfig listing. Unitil imq0 was inactive everything was
> clear and stable.
>
> BUT: Anytime I redirected any traffic to imq0 (with the iptables ... -j IMQ
> comand), then the kernel crashed with "Kernal panic!" message....
>
> kernel 2.4.21 patched with linux-2.4.21-imq-1.diff
> iptables 1.2.8 patched via patch-o-matic-20030107 with pom-20030625.diff
>
> Any tips, hints or whatever??
I don't know if it's the case, but never give the imq device an ip address.

Stef

-- 

stef.coene@xxxxxxxxx
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux