On Tue, 03 May 2022, Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > The VBIOS/GOP may not program the FDI M/n vs. dotclock entirely > consistently. Eg. on a SNB Thinkpad X220 LVDS I see dotclock of > 69.286 MHz (the best the DPLL can do) vs. FDI M/N 69.3 MHz > (matches what the EDID actually declares). > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx> > --- > drivers/gpu/drm/i915/display/intel_display.c | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c > index 1a25addadc21..86971be92e57 100644 > --- a/drivers/gpu/drm/i915/display/intel_display.c > +++ b/drivers/gpu/drm/i915/display/intel_display.c > @@ -10248,8 +10248,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) > crtc_state->min_voltage_level; > > intel_bw_crtc_update(bw_state, crtc_state); > - > - intel_pipe_config_sanity_check(dev_priv, crtc_state); > } > } -- Jani Nikula, Intel Open Source Graphics Center
